Oximeter Data Management Software. User Manual

Transcription

1 Oximeter Data Management Software User Manual Version 1.0 Date: 14 th Nov, 2013 Shenzhen Med-Link Electronics Tech Co., Ltd I

2 Content 1 Outline Page Ⅲ 1.1 Object Page Ⅲ 1.2 Composition Page Ⅲ 2 System Requirement Page Ⅲ 2.1 Minimum configuration requirement for hardware page Ⅲ 2.2 Software Requirement Page Ⅲ 3 Software Installation Page Ⅲ 4 Software Operation Page Ⅳ 4.1 Software Start Page Ⅳ 4.2 Software Exit Page Ⅳ 4.3 Software Menu Page Ⅳ 4.4 Control Page Ⅴ Button control Page Ⅴ Select menu Page Ⅴ 5 Software Application Page Ⅵ 5.1 Open Data File Page Ⅵ-Ⅸ 5.2 Input patient information Page Ⅸ-Ⅹ 5.3 Analysis Page Ⅹ 5.4 Viewing result Page Ⅹ-ⅩⅢ II

3 1 Outline 1.1 Object The manual is made for product user of Med-linket AM807 Tem-Pulse Oximeter, including the user and management personnel. The so-called user refers to product users, and manager refers to medical care personnel (doctors or nurses). The basic operation of Windows is not in description in the manual. 1.2 Composition The manual consist of: 1) Outline 2) System Requirement 3) Software Installation 4) Software Application 2 System Requirement 2.1 Minimum configuration requirement for hardware 1)CPU: over Celeron 1.2GHz 2)Memory : over 128MB 3)Hard disk: over 4GB 4)Printer compatible with operation system (if needs to output report) 2.2 Software Requirement The software is applied for Windows XP. 3 Software Installation Run Spo2.EXE program directly on the folder, file icon as follows: III

4 4 Software Operation 4.1 Software Start Open the executable file directly. 4.2 Software Exit Three methods of Software Exit: 1 Click the upper right icon to exit. 2 Click the File in Menubar to exit. 3 Click the icon in Control bar. 4.3 Software Menu Software Menu consist of File Report Analysis Setup Help. Table 4.1 Menu function of File Select menu Open file Save file Exit Function Open file record Save file record Exit the software Table 4.2 Menu function of Report Select menu SpO2-PR Report Temp Report Function Generate SpO2-PR Report Generate Temp Report Table 4.3 Menu function of Analysis Select menu Function Analyze data of file record, generate Analysis report Table 4.4 Menu function of Setup Select menu Function Common Hospital information setting: hospital or information doctor name Language Set the language of software interface Table 4.5 Menu function of Help Select menu Function About Software version information query Gen Data Not provided. IV

5 4.4 Control Button control Button control consist of: From left to right:open file Analysis Save SpO2-PR Report Temp Report Hospital information setting About Exit Select menu Choose to display data analysis result as needed. V

6 5 Software Application 5.1 Open Data File, select patients and serial ID in Data Info 1)Click Open File in File, or the icon. 2) Select the file to open. VI

7 3) The trend chart view and data after file opened. VII

8 4) Select patients and serial ID in Data Info. 5) The trend chart view and data after ID selected, other trend chart view and data for detail in following 5.4. VIII

9 5.2 Input patient information 1)Enter corresponding information below. IX

10 2)Setup- Information, enter corresponding information below 5.3 Analysis 1 Click Button control bar. 2 Click Menubar:Analysis--- Anlysis. 5.4 Viewing result 1)SpO2-PR trend chart view. Select up/down triangle icon on the left to zoom SpO2 range, and select the time by clicking to move around. X

11 2)Original data of SpO2-PR view. 3)Temperature trend chart view. Select up/down triangle icon on the left to zoom Temp range, and select the time by clicking to move around. XI

12 4)Original data of temperature view. 5) Data information. XII

13 6) Report printing(printer and drive installation needed): SpO2-PR Report -- Temp Report --- XIII