CRs to GSM on SSN reallocation

Transcription

1 ETSI SMG#29 Miami, Fl. USA, June 1999 Document P Source: Title: ETSI SMG3 CRs to GSM on SSN reallocation Document for: Decision Attention: Agenda item 6.3 Introduction: SM TDoc SPEC CR REV PHAS VERS SUBJECT CAT s29 G# NP A027 1 R98 E SSN reallocation for CAP, gsmscf, SIWF, GGSN, SGSN, A s29 NP A026 1 R SSN reallocation for CAP, gsmscf, SIWF, GGSN, SGSN, A s29 NP A028 1 R SSN reallocation for CAP, gsmscf, SIWF, GGSN, SGSN, F

2 3GPP TSG-CN #4 Tdoc 3GPP NP Sophia Antipolis, France May 1999 CHANGE REQUEST No : A027r1 Please see embedded help file at the bottom of this page for instructions on how to fill in this form correctly. Technical Specification GSM / UMTS: Version Submitted to SMG #29 for approval X Without presentation ("non-strategic") X list plenary meeting or STC here for information with presentation ("strategic") Proposed change affects: SIM ME Network X (at least one should be marked with an X) Workitem: SSN reallocation Source: 3GPP TSG CN/ETSI SMG3 Date: 22 May 1999 Subject: SSN reallocation for CAP, gsmscf, SIWF, GGSN, SGSN, SMLC and GMLC Category: F Correction Release: Phase 2 A Corresponds to a correction in an earlier release X Release 96 (one category B Addition of feature Release 97 and one release C Functional modification of feature Release 98 X only shall be D Editorial modification Release 99 marked with an X) UMTS Reason for change: - During the TSG-CN2 meeting in 21 st of May 1999, The agreement has been made that not only the SSN for CAP but also SSN for gsmscf, SIWF, GGSN, SGSN, SMLC and GMLC should be allocated to the national network range area. Clauses affected: 8, 8.1 and 8.2 Other specs Other releases of same spec affected: Other core specifications MS test specifications / TBRs BSS test specifications O&M specifications Other comments: < double-click here for help and instructions on how to create a CR.

3 8 SCCP subsystem numbers Subsystem numbers are used to identify applications within network entities which use SCCP signalling. In GSM, subsystem numbers may be used between PLMNs, in which case they are taken from the globally standardised range (1-31) or theat part of the national network range ( ) reserved for GSM use between PLMNs, or within a PLMN, in which case they are taken from the part of the national network range ( & ) not reserved for GSM use between PLMNs. 8.1 Globally standardised subsystem numbers used for GSM The following globally standardised subsystem numbers have been allocated for use by GSM: CAP HLR (MAP); VLR (MAP); MSC (MAP); EIR (MAP); is allocated for evolution (possible Authentication centre). 8.2 National network subsystem numbers used for GSM The following national network subsystem numbers have been allocated for use withinby GSM networks: BSS O&M (A interface); BSSAP (A interface). The following national network subsystem numbers have been allocated for use within and between GSM networks: SMLC(MAP); GMLC(MAP); CAP; CAPgsmSCF(MAP); SIWF(MAP); SGSN(MAP); GGSN(MAP).; SMLC(MAP); GMLC(MAP).

4 3GPP TSG-CN #4 Tdoc_3GPP_NP Sophia Antipolis, France May 1999 CHANGE REQUEST No : A026r1 Please see embedded help file at the bottom of this page for instructions on how to fill in this form correctly. Technical Specification GSM / UMTS: Version Submitted to SMG 29 for approval X Without presentation ("non-strategic") X list plenary meeting or STC here for information with presentation ("strategic") Proposed change affects: SIM ME Network X (at least one should be marked with an X) Workitem: SSN reallocation Source: 3GPP TSG CN Date: 22 May 1999 Subject: SSN reallocation for CAP, gsmscf, SIWF, GGSN and SGSN. Category: F Correction Release: Phase 2 A Corresponds to a correction in an earlier release X Release 96 (one category B Addition of feature Release 97 X and one release C Functional modification of feature Release 98 only shall be D Editorial modification Release 99 marked with an X) UMTS Reason for change: - During the TSG-CN2 meeting in 21 st of May 1999, The agreement has been made that not only the SSN for CAP but also SSN for gsmscf, SIWF, GGSN and SGSN should be allocated to the national network range area. Clauses affected: 8, 8.1 and 8.2 Other specs Other releases of same spec affected: Other core specifications MS test specifications / TBRs BSS test specifications O&M specifications Other comments: < double-click here for help and instructions on how to create a CR.

5 8 SCCP subsystem numbers Subsystem numbers are used to identify applications within network entities which use SCCP signalling. In GSM, subsystem numbers may be used between PLMNs, in which case they are taken from the globally standardised range (1-31) or theat part of the national network range ( ) reserved for GSM use between PLMNs, or within a PLMN, in which case they are taken from the part of the national network range ( & ) not reserved for GSM use between PLMNs. 8.1 Globally standardised subsystem numbers used for GSM The following globally standardised subsystem numbers have been allocated for use by GSM: CAP HLR (MAP); VLR (MAP); MSC (MAP); EIR (MAP); is allocated for evolution (possible Authentication centre). 8.2 National network subsystem numbers used for GSM The following national network subsystem numbers have been allocated for use withinby GSM networks: BSS O&M (A interface); BSSAP (A interface). The following national network subsystem numbers have been allocated for use within and between GSM networks: CAP; CAPgsmSCF(MAP); SIWF(MAP); SGSN(MAP); GGSN(MAP).; SMLC(MAP); GMLC(MAP).

6 3GPP TSG-CN #4 Tdoc_3GPP_NP Sophia Antipolis, France May 1999 CHANGE REQUEST No : A028r1 Please see embedded help file at the bottom of this page for instructions on how to fill in this form correctly. Technical Specification GSM / UMTS: Version Submitted to SMG 29 for approval X Without presentation ("non-strategic") X list plenary meeting or STC here for information with presentation ("strategic") Proposed change affects: SIM ME Network X (at least one should be marked with an X) Workitem: SSN reallocation Source: 3GPP TSG CN Date: 22 May 1999 Subject: SSN reallocation for CAP and gsmscf Category: F Correction Release: Phase 2 A Corresponds to a correction in an earlier release X Release 96 X (one category B Addition of feature Release 97 and one release C Functional modification of feature Release 98 only shall be D Editorial modification Release 99 marked with an X) UMTS Reason for change: - During the TSG-CN2 meeting in 21 st of May 1999, The agreement has been made that not only the SSN for CAP but also SSN for gsmscf should be allocated to the national network range area. Clauses affected: 8, 8.1 and 8.2 Other specs Other releases of same spec affected: Other core specifications MS test specifications / TBRs BSS test specifications O&M specifications Other comments: < double-click here for help and instructions on how to create a CR.

7 8 SCCP subsystem numbers Subsystem numbers are used to identify applications within network entities which use SCCP signalling. In GSM, subsystem numbers may be used between PLMNs, in which case they are taken from the globally standardised range (1-31) or theat part of the national network range ( ) reserved for GSM use between PLMNs, or within a PLMN, in which case they are taken from the part of the national network range ( & ) not reserved for GSM use between PLMNs. 8.1 Globally standardised subsystem numbers used for GSM The following globally standardised subsystem numbers have been allocated for use by GSM: CAP HLR (MAP); VLR (MAP); MSC (MAP); EIR (MAP); is allocated for evolution (possible Authentication centre). 8.2 National network subsystem numbers used for GSM The following national network subsystem numbers have been allocated for use withinby GSM networks: BSS O&M (A interface); BSSAP (A interface). The following national network subsystem numbers have been allocated for use within and between GSM networks: CAP; CAPgsmSCF(MAP); SMLC(MAP); GMLC(MAP).