Recording Server Version

Transcription

1 Technical Information English Recording Server Version Windows Version Version 1.0 /

2 1 Abstract This document contains information on news and changes that are introduced with the current version of the software. Additionally, it provides an overview off the tested and supported functional range of the various software versions. 2 Validity This document applies to the software SMAVIA Recording Server (Windows version). It has been created on basis of the software version Compatibility The current version of software SMAVIA Recording Server is compatible with the following software: SMAVIA Viewing Client as of version SMAVIA Viewer as of version PService as of version ActiveX-based Dallmeier control as of version Operating System Microsoft Windows 1) 7/8 32 Bit Microsoft Windows 7/8 64 Bit 4 Notes Please note that the innovations are only generally described in this document. the use of some functions may require a license subject to charges. the Dallmeier support hotline is always available for further questions. 5 Availability The current version of Recording Server (Windows) is available on the corresponding product page at 6 Update SMAVIA Recording Server (Windows) is offered as a full version only. An older version cannot be updated. If the replacement of an older version is required, proceed as follows: 1. Export the parameters (settings) of the old version. note Risk of data loss The recordings are lost during the uninstallation of the old version. Create a backup of important recordings using SMAVIA Viewing Client prior to the uninstallation. 1) Microsoft / Windows is a trademark or registered trademark of Microsoft Corporation headquartered in Redmond, Washington, USA 2

3 2. Create a backup of important recordings with SMAVIA Viewing Client. 3. Uninstall the old version. 4. Install the new version. 5. Use the existing code for the activation of the new version. note Risk of incorrect configuration New encryption algorithms are used as of the current version. This results in a modified structure of the license codes. Already purchased license codes cannot be reused for the current version. The conversion of already purchased license codes can be requested from the Dallmeier support. 6. Activate the purchased functions by entering the new license codes. 7. Define a directory for storage of the recordings. 8. Import the parameters (settings) of the old version. 9. Finally, check the recording configuration of the new version. 3

4 7 Innovations Panomera Configuration The current version of the SMAVIA Recording Server software has been further optimized for the recording of Panomera multifocal sensor systems. Panomera multifocal sensor systems can be recorded in the Motion Detection mode since the previous version. Therefore, the active area for the motion detection had to be defined in each of the Panomera Sub-Channels. This configuration step has been simplified. Now, the active area can be set conveniently in the Panomera Master-Channel. The configuration of all Panomera sub-channels is adjusted automatically. Panomera multifocal sensor systems can be recorded in the Permanent or Contact mode as well. Panomera Streamer for SVC A Panomera Streaming Server provides a single Full HD stream which summerizes the various Sub-Channels (streams) of a Panomera multifocal sensor system. The current version of the SMAVIA Recording Server software now supports lossless zooming in the stream provided by the Panomera Streaming Server. As a digital PTZ function, the zoomed area can be placed anywhere. The current version of the SMAVIA Recording Server software supports as a proxy the use of these functions with the software SMAVIA Viewing Client via network. The digital PTZ function for the stream of a Panomera Steaming Server is available in the Live mode and in the Playback mode as well. Support of new Camera Series The current version of SMAVIA Recording Server has been extended for the support of the camera series DF5200HD, DF5300HD and DF5400HD. 4

5 EdgeStorage & SmartBackfill The EdgeStorage for Emergency Recording with SmartBackfill function has been enhanced for recording in the Motion Detection mode. EdgeStorage stores the recordings permanently on the internal memory of the camera in case of a network failure. SmartBackfill transmits the recordings to the SMAVIA appliance, as soon as the network is available again. The SMAVIA appliance stores the buffered recordings permanently and then continues with the recording of the regular stream in the Motion Detection mode. New License Codes As of the current version of SMAVIA Recording Server new encryption algorithms are used, resulting in a changed structure of the license codes. Already purchased license codes cannot be reused for the current version. The conversion of already purchased license codes can be requested from the Dallmeier support. Support of Ethernet I/O Interface The current version of SMAVIA Recording Server has been extended for the support of an Ethernet I/O interface (Moxa iologik E1214). This device allows for the triggering of Contact IN and Relay OUT functions over the network interface of the appliance. Optional license (DLC - Ethernet I/O Interface for SMAVIA) Contact Triggered Recording The current version of SMAVIA Recording Server has been extended regarding the contact triggered recording. This function is now available for network cameras as well. 5

6 Automatic Logout The current version of SMAVIA Recording Server has been extended regarding the user management. The new option Max. Online for a client connection (all connections via DaVid protocol) can be set individually for every user group. After the set period has expired, the SMAVIA Viewing Client is automatically logged out. Timer for MaxView The current version of SMAVIA Recording Server has been extended regarding the function MaxView. The new function Timer can restrict the access rights to the recordings for each user group using a week planner. RTSP Audio Recording The current version of SMAVIA Recording Server has been extended by a function for the recording of external RTSP audio streams. The RTSP audio stream is received by a suitable encoder/streamer over the network interface. The stream is assigned to the corresponding camera in the recording setting dialogs. During the recording, the audio and video streams are merged and stored together. 6

7 8 Functional Range Note that the use of some functions may require a license subject to charges Definition of active areas in the Panomera Master-Channel O X Lossless digital zoom for Panomera Streamer O X EdgeStorage with Motion Detection O X Support of camera series 5000 O X Support of Ethernet I/O interface O X Automatic logout for client connections (DaVid) O X New encryption algorithms and license codes O X Recording of external RTSP audio streams O X X = Function is available in version O = Function is not available in version 7

8 Specifications subject to change without notice. Errors and misprints excepted Dallmeier electronic Dallmeier electronic GmbH & Co.KG Cranachweg Regensburg Germany Tel.: +49 (0) Fax: +49 (0)