BADGE HOLDERS & CARD DISPENSERS

Transcription

1 Protect IDs or credentials from wear, dirt, moisture Available in a variety of sizes for both horizontal and vertical cards D Easy Access Card Holder Rigid, plastic, horizontal, half card holder designed to be used with magnetic stripe cards Dimensions: 31/ 2 H x 11/ 2 W (89 x 38mm) Perfect for special events, exhibitions, conventions, backstage passes and security Swipe mag card without removing card from holder A ## Extra Large B ## Govt/Military Event Badges Bar Badge holder with 36 cord. Color bar badge holders with round neck cord and adjustable cord lock ## Govt/Military Dimensions: 411/16 W x 37/16 H (119 x 87 mm) ## Extra Large Dimensions: 411/16 W x 47/16 H (119 x 113 mm) A ## B ## FRONT VIEW SIDE VIEW E Gripper 30 Black molded plastic outer piece with silicon inner core uniquely designed to securely hold 30 mil cards without the need to slot punch the card Dimensions: 1 W x 11/16 H (25 x 17mm) Also available in white See Page 20 Badge Inserts ADJUSTABLE CORD LOCK Eliminates chance of damaging expensive technology card C Horizontal Locking Plastic Proximity Card Holder Holds two 30 mil (750 mic) cards or one 60 mil (1,500 mic) card. End piece snaps permanently into end of card holder to lock cards inside. Max. Card: 33/8 x 21/8 (86 x 54mm) Outside Dimensions: 41/4 W x 21/4 H (108 x 60mm) C See also our Key Locking Card Holder Page 25 VERTICAL WHITE

2 SHIELDED MAGNETIC A B Magnets are shielded to protect information on magnetic striped cards A Horizontal Top-Load Magnetic Badge Holder Max. Card: 3 3 /8 x 2 21 /64 (86 x 59mm) Outside Dimensions: 3 5 /8 W x 2 3 /4 H (92 x 70mm) B Horizontal Top-Load Magnetic Badge Holder Size: Govt/Military Max. Card: 3 7 /8 x 2 5 /8 (99 x 67mm) Outside Dimensions: 4 1 /16 H x 2 3 /4 W (103 x 70mm) MOLDED RIGID PLASTIC F # F # Colored Molded Rigid Plastic Convertible Card Holder Slot/chain holes and rotating clip for horizontal and/or vertical usage Outside Dimensions: 3 1 /2 H x 2 1 /4 W (89 x 57mm) CLEAR CLEAR Rotating clip allows the holder to display either horizontal or vertical cards C C Vertical Top-Load Magnetic Badge Holder Max. Card: 3 3 /8 x 2 21 /64 (86 x 59mm) Outside Dimensions: 3 3 /4 H x 2 5 /8 W (95 x 67mm) Also available vertical top-load Govt/military G # Open Face Card Holder Card Holder with slot/chain holes, vertical/side load with rails on all four sides. Four sides keeps card secure Max. 0 1Card: /8 x /8 (86 x 54mm) FROSTED Outside Dimensions: 3 5 /8 H x 2 5 /8 W (92 x 67mm) FROSTED FROSTED D Horizontal Top-Load Magnetic Badge Holder Size: 20/20 Max. Card: 3 3 /8 x 2 5 /8 (86 x 67mm) Outside Dimensions: 3 11 /16 W x 3 H (94 x 76mm) G # HORIZONTAL # FROSTED 8 Also available: # horizontal/side load D No clips or pins to damage clothing E Vertical Top-Load Magnetic Double Pocket Badge Holder Outside Dimensions: 3 3 /4 H x 2 5 /8 W (95x 67mm) H # Holds mulitiple cards H # Colored Molded Rigid-Plastic Two-Sided Multi-Card Holder Holds one 30 mil (750 mic) ID card on front side and two 30 mil (750 mic) ID/Prox cards or 6-8 business cards on back side. Slot/chain holes, vertical side load Max. Card: 3 3 /8 x 2 1 /8 (86 x 54mm) Outside Dimensions: 4 1 /4 H x 2 3 /8 W (108 x 60mm) HORIZONTAL # Also available # horizontal/side load E Note: Any person wearing a pacemaker please consult your physician before wearing magnetic badge holders

3 PROXIMITY BADGE HOLDERS A A Horizontal Top-Load Proximity Card Badge Holder with Slot Proximity card is locked in holder when attachment is inserted into slot Outside Dimensions: 4 W x 3 H (102 x 76mm) Also available vertical /top load ARM BAND BADGE HOLDERS E E Horizontal Back-Load Clear Vinyl Arm Band Badge Holder 30 mil vinyl front and back, heavy-duty construction Max. Card: 3 5 /8 x 2 21 /64 (92 x 59mm) Outside Dimensions: 5 7 /8 W x 3 1 /2 H (149 x 89mm) Also available Govt/Military size B B Horizontal Top-Load Proximity Card Badge Holder with Slot Frosted-back flexible vinyl. Proximity card is locked in holder when attachment is inserted into slot Outside Dimensions: 3 7 /8 W x 3 1 /16 H (99 x 78mm) F F Vertical Back-Load Clear Vinyl Arm Band Badge Holder 30 mil vinyl front and back, heavy-duty construction Max. Card: 3 5 /8 x 2 21 /64 (92x 59mm) Outside Dimensions: 5 H x 4 5 /16 W (127 x 110mm) Also available Govt/Military size Also available vertical /top load C Vertical Top-Load Proximity Card Badge Holder with Slot Clear heavy-duty vinyl. Proximity card is locked in holder when attachment is inserted into slot Outside Dimensions: 4 3 /8 H x 2 11 /16 W (111 x 68mm) Expandable and adjustable arm band stretches to 17 G # Interchangeable Arm Band Colored 10 (432mm) adjustable elastic strap Adjustment Range: 6 1 / /2 ( mm) Stretches To: 17 (432mm) C Also available horizontal /top load G # D Vertical Top-Load Proximity Card Proximity card is locked in holder when attachment is inserted into slot/chain holes Outside Dimensions: 4 7 /16 H x 2 11 /16 W (113 x 68mm) D Also available horizontal /top load

4 CLEAR & COLOR CODED VINYL A Horizontal Top-Load Clear Vinyl Outside Dimensions: 4 3 /16 W x 3 7 /8 H (107 x 99mm) F F Pressure-Sensitive Adhesive Back Clear Vinyl Business Card Holder Horizontal or Vertical, Ten self-adhesive card holders to one sheet Max. Card: 3 1 /2 x 2 (89 x 51mm) Outside Dimensions: 3 3 /4 W x 2 1 /2 H (95 x 64mm) A B B Vertical Top-Load Clear Vinyl Outside Dimensions: 4 3 /4 H x 3 1 /4 W (121 x 83mm) G ## G ## Horizontal Top-Load Color Bar Vinyl Max. Card: 3 5 /8 x 2 21 /64 (92 x 59mm) Outside Dimensions: 3 3 /4 W x 3 H (95 x 76mm) CLEAR Also available: # Vertical/Top Load ## Govt /Military Size ## Extra Large Size FLUORESCENT C Vertical Top-Load Clear Vinyl Badge Holder with 2-Hole Clip and Slot/Chain Holes Outside Dimensions: 4 11 /16 H x 3 1 /8 W (119 x 80mm) H # Horizontal Top-Load Color-Back Vinyl Max Card: 3 5 /8 x 2 21 /64 (92 x 59mm) Outside Dimensions: 3 13 /16 W x 3 H (97 x 76mm) C H # D D Horizontal Top-Load Clear Vinyl Badge Holder with 2-Hole Clip and Slot/Chain Holes Outside Dimensions: 4 3 /16 W x 3 7 /8 H (107 x 99mm) I # Vertical Top-Load Color-Frame Vinyl Max. Card: 3 5 /8 x 2 21 /64 (92 x 59mm) Outside Dimensions: 4 1 /8 H x 2 7 /8 W (105 x 73mm) E E Horizontal Top-Load Clear Vinyl Name Badge Holder with Pin-Clip Combo and Attachment Holes Outside Dimensions: 4 1 /4 W x 3 3 /8 H (108 x 86mm) I #

5 CLEAR VINYL A A Horizontal Top-Load Clear Vinyl Badge Holder with 2-Hole Clip Outside Dimensions: 3 3 /4 W x 2 9 /16 H (95 x 65mm) Also available horizontal/side load F Vertical Top-Load Clear Vinyl Outside Dimensions: 4 H x 2 1 /2 W (102 x 64mm) B Vertical Top-Load Clear Vinyl Badge Holder with 2-Hole Clip Outside Dimensions: 3 3 /4 H x 2 9 /16 W (95 x 65mm) F G Horizontal Top-Load All-Weather Resealable Clear Vinyl Badge Holder with Slot/Chain Holes Outside Dimensions: 4 1 /8 W x 3 5 /8 H (105 x 92mm) B C Vertical Top-Load Clear Vinyl Badge Holder with 2-Hole Clip Size: Govt/Military Max. Card: 3 7 /8 x 2 5 /8 (99 x 67mm) Outside Dimensions: 4 1 /4 H x 3 5 /16 W (108 x 84mm) Also available horizontal/top load G Air tight seal keeps out dirt and moisture H Vertical Top-Load All-Weather Resealable Clear Vinyl Badge Holder with Slot/Chain Holes Outside Dimensions: 4 7 /8 H x 3 W (124 x 76mm) C H D Horizontal Top-Load Clear Vinyl Outside Dimensions: 3 11 /16 W x 3 H (94 x 76mm) I Vertical Top-Load All-Weather Resealable Clear Vinyl Keeps out dirt and moisture. Max. Card: 6 1 /4 x 3 3 /4 (159 x 95mm) Outside Dimensions: 8 3/ 16 W x 4 1 /4 H (210 x 108mm) D Perfect for outdoor events E E Horizontal Top-Load Clear Vinyl Size: Govt/Military Max. Card: 3 7 /8 x 2 5 /8 (99 x 67mm) Outside Dimensions: 4 1 /4 W x 3 1 /2 H (108 x 89mm) Also available vertical/top load I J J Horizontal Side-Load Clear Vinyl and Tuck-In Flap Outside Dimensions: 3 1 /2 W x 3 1 /8 H (89 x 80mm)

6 CREDENTIAL WALLETS Organization name, logo or slogan can be imprinted on wallet BACK A ## The All-In-One Holder Colored nylon holder features two pockets on one side: a clear vinyl pocket to hold a name badge (or event pass) and a full size nylon pocket with a fold-over Velcro flap. Reverse side has a nylon pocket for business cards and two pen holder sleeves. This holder includes a black nylon neck cord and adjustable cord lock. Dimensions: 7 1 /8 H x 5 1 /4 W (180 x 133mm) Imprint Area: 4 W x 1 1 /2 H (101 x 38mm) Insert Card Size: 4 W x 3 H (101 x 76mm) C ## BACK C ## The Neck Pouch Colored nylon holder features a clear vinyl pocket to hold a name badge (or event pass) and two zippered compartments on the other side to keep your valuables close and convenient. This pouch includes a black nylon neck cord and adjustable cord lock. Dimensions: 4 1 /2 H x 4 W (114 x 101mm) Imprint Area: 2 1 /2 W x 1 1 /4 H (64 x 32mm) Insert Card Size: 4 W x 3 H (101 x 76mm) A ## B ## BACK B ## The Neck Wallet 3-pocket, nylon holder doubles as a name badge holder and wallet. It features a clear vinyl pocket to hold a name badge (or event pass), a nylon pocket on the other side for business cards, and a full-length zippered compartment for currency. This pouch includes a black nylon neck cord and adjustable cord lock. Dimensions: 5 W x 4 1 /4 H (127 x 108mm) Insert Card Size: 4 W x 3 H (101 x 76mm) D D Blank Badge Inserts Small perforated badge inserts. 6-up on letter size 81/ 2 x 11 sheets of inkjet paper. Works with ## Dimensions: 3 7 /8 W x 2 5 /8 H (98 x 67mm) Also available /4 W x 3 2/3 H large perforated inserts. Works with ## and ## See Page Did you know that... You save time and money when you use our perforated badge inserts on ink jet paper

7 CASINO & CONVENTION A Compartment Fold-Over Casino Badge Holder Clear vinyl with slot hole, horiz/top load Max. Card: 3 3 /4 x 2 1 /2 (95 x 64mm) Name Tag: 2 7 /8 x 1 1 /8 (73 x 29mm) License: 2 7 /8 x 1 1 /4 (73 x 32mm) Outside Dimensions: 6 3 /16 H x 4 1 /8 W (157 x 105mm) F Vertical Top-Load Credential Badge Holder Clear vinyl with 1 /4 (6mm) tuck-in flap, slot/chain holes Max. Card: 7 3 /4 x 3 15 /16 (197 x 100mm) Outside Dimensions: 8 1 /2 H x 4 1 /4 W (216 x 108mm) Most popular! A F B B /4 Convention Badge Holder Clear rigid vinyl (10 mil) with nickel-plated steel embossed U clip Max. Card: 3 1 /2 x 2 1 /4 (89 x 57mm) Outside Dimensions: 3 1 /2 W x 2 1 /4 H (89 x 57mm) G Vertical Top-Load Credential Badge Holder Clear vinyl with 3 /16 (5mm) tuck-in flap, slot /chain holes. Max. Card: 5 1 /2 x 3 1 /2 (140 x 89mm) Outside Dimensions: 6 3 /16 W x 4 H (151 x 102mm) C Best value! C /4 Convention Badge Holder Clear rigid vinyl (10 mil) with nickel-plated steel crimp pin Max. Card: 3 1 /2 x 2 1 /4 (89 x 57mm) Outside Dimensions: 3 1 /2 W x 2 1 /4 H (89 x 57mm) G D Convention Badge Holder Clear rigid vinyl (10 mil) with nickel-plated steel embossed U clip Max. Card: 4 x 3 (102 x 76mm) Outside Dimensions: 4 W x 3 H (102 x 76mm) H Vertical Top-Load Credential Badge Holder with Slot Hole Clear vinyl, front and back pockets Max. Card: 4 1 /2 x 3 1 /4 (108 x 83mm) Outside Dimensions: 5 1 /4 H x 3 3 /8 W (134 x 86mm) D Also available with pin back H E E Convention Badge Holder Clear rigid vinyl (10 mil) with nickel-plated steel pin-clip combo Outside Dimensions: 4 W x 3 H (102 x 76mm)

8 MOLDED RIGID PLASTIC continued A A Frosted Molded Rigid-Plastic Slot/chain holes, thumb notch, horizontal side load Outside Dimensions: 3 9 /16 W x 2 11 /16 H (90 x 68mm) E E Frosted Molded-Polycarbonate Holds one 30 mil (750 mic) card. Extractor slide on back side. Ideal for chip and magnetic stripe cards. Slot/chain holes, horiz/side load Outside Dimensions: 3 5 /8 W x 2 7 /16 H (92 x 62mm) Also available: vertical/top load VERTICAL B B Frosted Molded Rigid-Plastic Slot/chain holes, thumb notch, vertical side load Outside Dimensions: 4 1 /4 H x 2 7 /16 W (108 x 62mm) Removable Key F Frosted Molded-Polycarbonate Locking Card Holder with Key Holds two 30 mil (750 mic) cards. Locks cards into holder by snapping end piece into place. Special key, kept by badging offical, can unlock holder for card replacement. Tamper-proof feature especially popular in today s world! Slot/chain holes, horizontal side load Outside Dimensions: 3 7 /8 W x 2 1 /2 H (99 x 64mm) Sold Separately: Key End Piece Also available: vertical/top load C Push card out with thumb notches C Frosted Molded-Polycarbonate Holds two 30 mil (750 mic) cards. Thumb notches on front and back sides. Ideal for chip and magnetic stripe cards. Attachment for badge strap, vertical top load Outside Dimensions: 3 9 /16 H x 2 1 /4 W (91 x 57mm) F G G Milky-White Molded Rigid-Plastic Card Holder Badge strap attachment hole, horizontal/vertical load Outside Dimensions: 3 1 /2 H x 2 1 /4 W (89 x 57mm) Push card out with extractor slides D D Frosted Molded-Polycarbonate Holds two 30 mil (750 mic) cards. Extractor slides on front and back sides. Ideal for chip and magnetic stripe cards. Slot/chain holes, horizontal side load Outside Dimensions: 3 5 /8 W x 2 7 /16 H (92 x 62mm)