EMC Storage Resource Management Suite

Transcription

1 EMC Storage Resorce Management Site Version Installation and Configration Gide PN REV 02

2 Copyright EMC Corporation. All rights reserved. Pblished in USA. Pblished April, 2014 EMC believes the information in this pblication is accrate as of its pblication date. The information is sbject to change withot notice. The information in this pblication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this pblication, and specifically disclaims implied warranties of merchantability or fitness for a particlar prpose. Use, copying, and distribtion of any EMC software described in this pblication reqires an applicable software license. EMC², EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other contries. All other trademarks sed herein are the property of their respective owners. For the most p-to-date reglatory docment for yor prodct line, go to EMC Online Spport ( For docmentation on EMC Data Domain prodcts, go to the EMC Data Domain Spport Portal ( EMC Corporation Hopkinton, Massachsetts In North America EMC Storage Resorce Management Site Installation and Configration Gide

3 CONTENTS Tables 5 Chapter 1 Installation Workflow 7 Core software... 8 Spported pdate paths... 8 Storage Resorce Management Site SoltionPacks... 8 Chapter 2 Virtal Appliance Installation 9 Virtal Appliance installation overview...10 For VM vapp installation option...10 One VM vapp installation option Installing the 4 VM vapp...11 Verifying the deployment and starting the appliance Logging in to the User Interface Passwords Adding disk space...14 Chapter 3 Standard Installation 15 Standard installation options Installing core software on UNIX Installing core software on Windows Server...17 Chapter 4 Configration 19 Starting the core software services from the command line Starting the core software services on Windows Verifying if the core software services are rnning Trobleshooting service start-p problems on UNIX Trobleshooting service start-p problems on Windows...22 Logging in to the User Interface Connecting to Centralized Management Confirm configration settings and register remote servers Installing core site licensing Adding licenses Verifying core software licenses from Centralized Management...24 Configring the ser process limits for the Linx installation Policy Management...25 Creating a policy Enabling or Disabling a policy Reconfigring the maps service...28 Reconfigring generic-rsc and generic-snmp Chapter 5 Infrastrctre Preparation for Discovery and Data Collection 31 Host preparation for discovery data collection...32 Host configration reqired for Windows and UNIX Prereqisites for Windows 2003 Hosts EMC Storage Resorce Management Site Installation and Configration Gide 3

4 CONTENTS Windows configration for discovery and data collection Configring grop policy UNIX and Linx host configration for discovery and data collection Configring VIOS (VIO Server) for discovery Configring ESX hosts to collect PowerPath metrics...41 Configring hosts to collect PowerPath metrics Installing EMC Host Interface on Windows Server Switch configration for discovery and data collection Brocade switch configration Cisco switch configration Storage system preparation for discovery and data collection Preparing EMC Centera...49 Preparing Converged Infrastrctre Preparing EMC Data Domain...50 Preparing EMC Isilon Preparing EMC VMAX...50 Preparing EMC VNX Preparing EMC VPLEX Preparing EMC VMware vcenter...57 Preparing Hitachi Device Manager...57 Preparing HP 3PAR StoreServ Preparing HP EVA Preparing IBM DS Preparing IBM XIV Preparing NetApp Filer...59 Preparing VI VirtalWisdom...59 Chapter 6 SoltionPack Installation 61 Access credentials reqired for SoltionPacks...62 Connecting to Centralized Management Installing a SoltionPack...65 Configration dring SoltionPack installation...66 Post-installation configration of SoltionPacks...86 Post-installation configration details Configring Soltions Enabler client access for VMAX Enabling passive host discovery throgh Brocade FC SoltionPack Enabling passive host discovery throgh Generic-SNMP...94 Post-install configration for SoltionPack for Physical Hosts...95 Configring compliance-frontend.xml...96 Policy Management...97 Chapter 7 Site Software Uninstallation 101 Overview Stopping core software services on a UNIX server Uninstalling core software from a UNIX server Stopping core software services on a Windows server Uninstalling core software from a Windows server Uninstalling a SoltionPack EMC Storage Resorce Management Site Installation and Configration Gide

5 TABLES 1 2 Access credentials...62 SoltionPack configration details EMC Storage Resorce Management Site Installation and Configration Gide 5

6 TABLES 6 EMC Storage Resorce Management Site Installation and Configration Gide

7 CHAPTER 1 Installation Workflow This chapter incldes the following topics: Core software... 8 Storage Resorce Management Site SoltionPacks... 8 Installation Workflow 7

8 Installation Workflow Core software The core software platform provides a reporting soltion bilt on a scalable architectre of distribted backends, frontends, collectors and databases. Installing the core software platform establishes the fondation for the site, providing common capabilities, fnctions and ser interfaces available to all site sers, regardless of the specific installed SoltionPacks. Yo can install site software as a Virtal Appliance in a VMWare environment or sing a standard binary installation: The Virtal Appliance installation enables yo to deploy the site software as an appliance in a spported VMWare environment. Alternatively, yo can perform a standard, or binary, installation of the site software on physical or virtal servers. Spported pdate paths EMC only spports the application of specific pdates in seqence > > Storage Resorce Management Site SoltionPacks The site incldes a nmber of storage infrastrctre-related SoltionPacks to spport EMC and third-party storage infrastrctre components. Refer to the following docments for details on SoltionPacks spported with Storage Resorce Management Site: EMC Storage Resorce Management Site Spport Matrix EMC Storage Resorce Management Site Release Notes 8 EMC Storage Resorce Management Site Installation and Configration Gide

9 CHAPTER 2 Virtal Appliance Installation This chapter incldes the following topics: Virtal Appliance installation overview...10 Installing the 4 VM vapp...11 Verifying the deployment and starting the appliance Logging in to the User Interface Adding disk space...14 Virtal Appliance Installation 9

10 Virtal Appliance Installation Virtal Appliance installation overview Yo can deploy the site in a spported VMWare environment. A virtal appliance (vapp) is a software soltion composed of one or more virtal soltions that is packaged by an appliance vendor and can be deployed, managed, and maintained as a nit. Storage Resorce Management Site vapps are distribted sing Open Virtalization Format (OVF) files. Depending on yor environment reqirements, two types of OVF installations are available to install the site core software: Note For VM vapp installation option One VM vapp installation option For VM vapp installation - Distribtes core software components across for VMs (Frontend, Primary Backend, Additional Backend, and Collector). The VMs in this installation are pre-configred to commnicate with each other, offering an ot-ofthe-box configration that can fnction in smaller environments. Yo can frther scale and extend the environment by installing additional VMs sing the one VM vapp installation. One VM vapp installation - Has the potential to install any of the core software components in a single VM. This can be sed to install a single, consolidated VM with all components for evalation prposes, or to add additional Backend and Collector appliances to extend or scale the environment created sing the for VM vapp installation. The vapp deployment shold be sed only for new installations. If yo need to pgrade an existing installation, se the standard binary setp script or exectable to migrate to a newer release. The vapp deployment spport was not available prior to the Storage Resorce Management Site 3.0 release. Use this procedre to install the for VM vapp. The for VM vapp installation deploys for VMs which are pre-configred to commnicate with each other: Frontend VM - This VM hosts the web portal and centralized management applications and controls licensing. Primary Backend VM - This VM hosts the primary database, back end components, load balancer/arbiter and modles which spport capacity, alerting and topology. Yo can have only one instance of the Primary Backend in yor environment. Additional Backend VM - This VM incldes back end components and timeseries databases and is sed to scale ot back end processing. Collector VM - This VM hosts collectors sed to discover, collect and process data from spported hosts, switches and storage devices. Use this option to install a vapp which incldes all core software components or to extend a for VM vapp environment to inclde additional vapps. This installation option provides a specific appliance as a single virtal machine which can then be manally added to yor base installation to extend yor environment: 10 EMC Storage Resorce Management Site Installation and Configration Gide

11 Virtal Appliance Installation Frontend VM - This appliance hosts the web portal and centralized management applications and controls licensing. Primary Backend VM - This VM hosts the primary database, back end components, load balancer/arbiter and modles which spport capacity, alerting and topology. Yo can have only one instance of the Primary Backend in yor environment. Additional Backend VM - This VM incldes back end components and timeseries databases. Collector VM - This VM hosts collectors sed to discover, collect and process data from spported hosts, switches and storage devices. This VM incldes the same modles as the Minimal Installation and adds generic Collector modles (Generic- SNMP, Generic-RSC) In addition, the one VM vapp installation provides the following specialized installation options: All-In-One Appliance - This vapp is intended for a small site or to condct proof of concept activities with the site software and installs Frontend, Backend and Collector core software components on a single virtal machine. Minimal Installation - Installs the minimal base software components reqired for the core software, enabling a cstom installation options on a single virtal machine. Installing the 4 VM vapp Yo can deploy the SRM Site 4 VM appliance from an OVF template sing a vsphere Client. Before yo begin vcenter location where yo are deploying the appliance Data store yo can se for deployment Static IP address to assign to yor appliance Gateway Netmask DNS Servers DRS enabled Procedre 1. Open vsphere Client and connect to the vcenter Server that manages yor VMware environment. 2. Select the resorce pool to which yo want to deploy the VMs for SRM Site 3. From the File men, select Deploy OVF Template. 4. In the Sorce step, browse to the location of the SRM_4VM_vApp.ovf file. Example file path: /opt/ovf/srm_4vm_vapp.ovf Example URL: SRM_4VM_vApp.ovf 5. Click Next. To minimize the deployment time, deploy the appliance within the same local area network (LAN) shared by yor VMware ESX/ESXi servers. The deployment time is approximately 5 to 15 mintes. Deployment across a WAN can take 2 hors or more. Installing the 4 VM vapp 11

12 Virtal Appliance Installation 6. In the OVF Template Details step, review the details of the loaded.ovf file and click Next. 7. In the End User License Agreement step, review the license agreement. Click Accept and then click Next to contine. 8. In the Name and Location step: a. Accept the defalt name (SRM Site) or type a Name for the appliance. b. Specify an Inventory Location for the appliance within yor VMware environment. c. Click Next. 9. (Optionally for a 1 VM deployment only), select a deployment configration from the drop-down men: All-In-One Front End Appliance Additional Back End Appliance Collector Appliance Minimal Installation 10.Select the destination storage for the virtal machine files and click Next. 11.In the Disk Format step, select the storage space provisioning method and click Next. Option Thin provisioned format Description On-demand expansion of available storage, sed for newer data store file systems. Thick provisioned format Appliance storage that is allocated immediately and reserved as a block. Note The Thin provisioned format option is recommended when the vapp is deployed in a high performance environment. 12.In the Network Mapping step, select a destination network that has an IP Pool associated with itfor each of the VMs and click Next. 13.In the IP Address Allocation step, choose the IP allocation policy and IP protocol to se and click Next. 14.In the Properties step, provide the vales of the properties as defined in the Virtal Appliance Properties table for each of the VMs and click Next. 15.In the Ready to Complete step, review the list of properties for the appliance and click Finish. A stats bar appears in the vsphere Client showing the deployment progress. 16.After deployment is complete, click Close in the Deployment Completed Sccessflly dialog box. 12 EMC Storage Resorce Management Site Installation and Configration Gide

13 Virtal Appliance Installation Verifying the deployment and starting the appliance After deploying the appliance, verify that it is working. Procedre 1. In the vsphere client, navigate to the Host and Clster view. 2. From the configred resorce pool, find the resorce pool yo selected for the appliance. The new appliance is listed nder the resorce pool. 3. Right-click each VM and select Open Console. 4. Right-click the vapp and select Power On. Each VM in the vapp is powered on. Logging in to the User Interface 5. Observe the initial startp and modle installations on each console. Once the initial startp and modle installations are complete, the login prompt displays. Log in to contine to view reports or to test ser access by specifying operator credentials. Procedre 1. Point yor browser to the URL. For example, 2. Log in. a. Type the login credentials. The defalt sername is admin and the defalt password is changeme. b. Click Sign In. After yo finish Note Yo are atomatically logged off after for hors. Passwords Use passwords to control access to the appliance. The defalt sernames and passwords are: Environment Username and password - - Web-based console accessed via a browser admin/changeme Make sre yo change this password. Linx gest OS appliance console accessed via SSH or vsphere root/changeme1! Verifying the deployment and starting the appliance 13

14 Virtal Appliance Installation If yo set the appliance console password while yo were deploying the OVF, the password yo entered is the defalt password. Passwords mst conform to the following reqirements. Note These reqirements do not apply to the Linx passwords. Be a minimm of eight characters and a maximm of 40 characters in length Contain at least one nmeric character Contain at least one ppercase and one lowercase character Contain at least one non-alphanmeric character sch as # or! May not contain the single qote character (') becase it is a delimiter for the password string Adding disk space Add a virtal machine disk to a rnning system for se by site virtal machines. Procedre 1. From the vsphere Console, add a new disk to a virtal machine. 2. Select Edit Settings on the virtal machine. 3. Click Add. 4. Select Hard Disk, then click Next. 5. Select Create a new virtal disk, then click Next. 6. Specify the disk size, the provisioning type, and the location of the disk, then click Next. 7. Specify the virtal device node (the defalt vale shold be OK), then click Next. 8. Review the options, and then click Finish. 9. Access a Linx login prompt. Yo can access a login prompt throgh the vsphere Console or sing an SSH tool sch as PTTY. 10.Log in to Linx. 11.At the system prompt, type the command expand_disk.pl. 14 EMC Storage Resorce Management Site Installation and Configration Gide

15 CHAPTER 3 Standard Installation This chapter incldes the following topics: Standard installation options Installing core software on UNIX Installing core software on Windows Server...17 Standard Installation 15

16 Standard Installation Standard installation options Yo have several available options when performing a standard, or binary, installation of the core software. There are three types of hosts that make p the core software infrastrctre: Note Frontend host Backend host (Primary and Additional) Collector host Installing core software on UNIX Yo can have only one Primary Backend host. Yo can add Additional Backend hosts to scale ot yor configration. Additional Backend hosts do not inclde the main database and exclde a sbset of modles. The components that collectively differentiate the host types are called modles. The core software installation binary spports the following installation options. Defalt (UNIX) or Recommended Modles (Windows) installation Use this option to install all modles available in the core software binary installation package. Yo can se this option on a single host, enabling it to serve as a Frontend, Backend, and Collector host. Yo can frther cstomize this host by manally adding or removing specific modles. Host-specific installations For a host which reqires a specific set of modles to perform its intended fnction (Frontend, Backend or Collector host), yo can se the same core software binary installation and select the specific installation type. Minimal (UNIX) or Base Installation (Windows) Use this option to install the minimal modles reqired for any host type. Yo can frther cstomize this host by manally adding specific modles. Yo can install the core software on spported UNIX hosts. This procedre specifically ses the Linx installation procedre as an example. Before yo begin When installing core software on a UNIX server, yo mst assign exectable permissions to the installation script. Make sre yo have a login with root privileges to rn the installer. Download the installation package to a directory on the server, sch as /temp. Procedre 1. Locate the installation package. 2. Navigate to the location where the core software is located. 3. Change the permissions of the installer so yo can rn it. For example, for the Linx 64-bit exectable, type: chmod +x prodctname-setp-linx-x86_64-v63.sh 16 EMC Storage Resorce Management Site Installation and Configration Gide

17 Standard Installation 4. Rn the installer from the directory. For example:./prodctname-setp-linx-x86_64-v63.sh 5. Read and accept the End User License Agreement. Use the space bar to scroll throgh the agreement. Press y to accept it. 6. Press Enter to accept the defalt installation directory of /opt/apg. Or, enter another location and press y. 7. Press Enter to accept the defalt ser accont name of apg or enter another name. 8. Press Enter to accept the defalt location of service scripts of /etc/init.d or enter another location. 9. Press Enter to accept the defalt base directory of/etc for rnlevels scripts or type another location. 10.Depending on the host prpose, select one of the following: Option Defalt Frontend Backend Collector Minimal Description Installs all recommended modles available in the binary installation package. Yo can se this option on a single host, enabling it to serve as a Frontend, Backend and Collector host. Yo can frther cstomize this host by manally adding or removing specific modles. Installs web services and front end applications. Installs the database and backend services. Installs base modles to perform data collection and enrichment. Installs the minimal modles reqired for any host type. Yo can frther cstomize this host by manally adding specific modles. Installing core software on Windows Server Yo can install the core software on spported Windows Server hosts. Before yo begin Make sre yo have a login with system administrator privileges to rn the installer. Download the installation package to a folder on the server, sch as \temp. Procedre 1. Locate the installation package. 2. Doble-click the setp file. For example: prodctname-setp-win64-v63.exe 3. Click Next in the Welcome screen. 4. Read and accept the End User License Agreement. Click I Agree. 5. Select the Destination Folder: a. Change the drive to a Windows non-root drive. b. Maintain the defalt folder strctre (Program Files\APG). c. Click Next. 6. Depending on the host prpose, select one of the following: Installing core software on Windows Server 17

18 Standard Installation Option Recommended Modles Frontend Modles Backend Modles Collector Modles Base Installation Description Installs all recommended modles available in the binary installation package. Yo can se this option on a single host, enabling it to serve as a Frontend, Backend and Collector host. Yo can frther cstomize this host by manally adding or removing specific modles. Installs web services and front end applications. Installs the database and backend services. Installs base modles to perform data collection and enrichment. Installs the minimal modles reqired for any host type. Yo can frther cstomize this host by manally adding specific modles. 7. Click Install. 8. On completion, click Next. 9. Click Finish to close the installer. 18 EMC Storage Resorce Management Site Installation and Configration Gide

19 CHAPTER 4 Configration This chapter incldes the following topics: Starting the core software services from the command line Starting the core software services on Windows Verifying if the core software services are rnning Logging in to the User Interface Connecting to Centralized Management Confirm configration settings and register remote servers Installing core site licensing Configring the ser process limits for the Linx installation Policy Management...25 Reconfigring the maps service...28 Reconfigring generic-rsc and generic-snmp Configration 19

20 Configration Starting the core software services from the command line After installing core software, yo mst start all reqired services. Before yo begin Before starting core software services, ensre the library search path is correct on the server hosting core software. This reqirement applies to the libaio package on Linx. Make sre yo have a login with root, APG, or system administrator privileges to perform this task. The ser apg is the accont that the core software application ses instead of root. Procedre Type the command for yor operating system from the bin directory of the installation: Operating system UNIX Windows Command./manage-modles.sh service start all manage-modles.cmd service start all Reslts A list of services appears. For example: * Starting 'topology-mapping-service Defalt'... [ OK ] * Starting 'webservice-gateway Defalt'... [ OK ] * Starting 'mysql Defalt'... [ OK ] * Starting 'alerting-backend Defalt'... [ OK ] * Starting 'backend Defalt'... [ OK ] * Starting 'collector-manager Defalt'... [ OK ] * Starting 'collector-manager Generic-SNMP'... [ OK ] * Starting 'collector-manager Load-Balancer'... [ OK ] * Starting 'collector-manager emc smarts'... [ OK ] * Starting 'event-processing-manager emc smarts'... [ OK ] * Starting 'tomcat Defalt'... [ OK ] * Starting 'task-schedler Defalt'... [ OK ] Starting the core software services on Windows After installing core software on Windows, yo can start all reqired services from a Windows desktop. Before yo begin Make sre yo have logged in with system administrator credentials to manage services. Procedre 1. From the application server's desktop, select Start > Administrative Tools > Services. 2. Right-click each service and click Start, in this order: APG Topology Mapping Service APG Topology Service APG Webservice Gateway APG MySQL APG Alerting Backend 20 EMC Storage Resorce Management Site Installation and Configration Gide

21 Configration APG Backend APG Collector Manager (Generic RSC) APG Collector Manager (Generic-SNMP) APG Collector Manager (Load-Balancer) APG Event Processing Manager (Alert-Consolidation) APG Tomcat APG Task Schedler Verifying if the core software services are rnning Verify the core software services are rnning by obtaining the stats. Before yo begin Make sre yo have a login with root, APG, or system administrator privileges to perform this task. The ser apg is the accont that the core software application ses instead of root. Procedre 1. Type the command for yor operating system from the bin directory of the core software installation: Operating system UNIX Windows Command./manage-modles.sh service stats all manage-modles.cmd service stats all 2. Verify that each service has a stats of rnning in the otpt: Reslts * Checking 'topology-mapping-service Defalt'... [ rnning ] * Checking 'webservice-gateway Defalt'... [ rnning ] * Checking 'mysql Defalt'... [ rnning ] * Checking 'alerting-backend Defalt'... [ rnning ] * Checking 'backend Defalt'... [ rnning ] * Checking 'collector-manager Defalt'... [ rnning ] * Checking 'collector-manager Generic-SNMP'... [ rnning ] * Checking 'collector-manager Load-Balancer'... [ rnning ] * Checking 'collector-manager emc smarts'... [ rnning ] * Checking 'event-processing-manager emc smarts'... [ rnning ] * Checking 'tomcat Defalt'... [ rnning ] * Checking 'task-schedler Defalt'... [ rnning ] Trobleshooting service start-p problems on UNIX Check the log files when services do not start. Before yo begin Make sre yo have logged in with root or APG privileges to check the log files. Procedre Check these logs in the /opt/apg/ directory to trobleshoot start-p problems: Databases/MySQL/Defalt/data/[SERVER NAME].err Backends/Alerting-Backend/Defalt/logs/alerting-0-0.log Backends/APG-Backend/Defalt/logs/cache-0-0.log Collecting/Collector-Manager/Defalt/logs/collecting-0-0.log Web-Servers/Tomcat/Defalt/logs/service.log Verifying if the core software services are rnning 21

22 Configration Tools/Task-Schedler/Defalt/logs/schedler-0-0.log Tools/Webservice-Gateway/Defalt/logs/gateway-0-0.log Trobleshooting service start-p problems on Windows Check the log files when services do not start. Before yo begin Make sre yo have logged in with system administrator credentials to check the log files. Procedre Logging in to the User Interface Check these logs in the C:\Program Files\APG directory to trobleshoot start-p problems: Databases\MySQL\Defalt\data\[SERVER NAME].err. Backends\Alerting-Backend\Defalt\logs\alerting-0-0.log Backends\APG-Backend\Defalt\logs\cache-0-0.log Collecting\Collector-Manager\Defalt\logs\collecting-0-0.log Web-Servers\Tomcat\Defalt\logs\service.log Tools\Task-Schedler\Defalt\logs\schedler-0-0.log Tools\Webservice-Gateway\Defalt\logs\gateway-0-0.log Log in to contine to view reports or to test ser access by specifying operator credentials. Procedre 1. Point yor browser to the URL. For example, 2. Log in. a. Type the login credentials. The defalt sername is admin and the defalt password is changeme. b. Click Sign In. After yo finish Note Yo are atomatically logged off after for hors. Connecting to Centralized Management Connect to the server so that yo can access Centralized Management to install and administer SoltionPacks. Centralized Management is one of the mltiple web applications available in core software. Procedre 1. Open a browser. 2. Type The serverip is the flly qalified hostname or IP address of the server where core software is rnning. 22 EMC Storage Resorce Management Site Installation and Configration Gide

23 Configration The port is the port nmber of the server. For example: 3. Log in. a. Defalt sername is admin. b. Defalt password is changeme. c. Click Sign In. After yo finish Yo are atomatically logged off after for hors. Confirm configration settings and register remote servers Confirm configration settings for the Frontend server after yo first log in. In a mlti-host environment, yo mst also register remote servers with the Frontend server and confirm those configration settings too. Before yo begin After yo first log in with administrator credentials for core software, yo mst confirm the configration settings for the Frontend server. If yo install additional servers after installing the Frontend server (for example, collectors, backend server, and so forth), yo mst register each of them on the Frontend server. Procedre 1. In the APG Servers Configration window, click Save to accept the predefined vales for the Frontend server. Fields that are blank mst remain blank. 2. To register additional servers, log into Centralized Management and click Configration > Register a Server. 3. Complete the fields and click Save. For detailed information abot the entries, click Docmentation and view the Centralized Management Gide. Installing core site licensing When yo install a site, add a license for the site. Licenses for specific SoltionPacks are contained in the site license. We recommend that yo immediately install a permanent site license. After 30 days the initial bootstrap license expires. CAUTION Verify that all SoltionPacks yo have acqired are registered in ELMS before removing the bootstrap license. There are two type of licenses: Permanent--Permanent licenses do not expire. Temporary--Temporary licenses have expiration dates. When temporary licenses expire, the modle license checks fail and the modles stop working. If the frontend modle fails, yo cannot access the prodct. ELMS licenses can only be added via a single.lic file. Large cstomers with mltiple party IDs may have hardware and entitlements at mltiple locations, reslting in Confirm configration settings and register remote servers 23

24 Configration mltiple.lic files. ELMS can only register one.lic file, which contains licenses for all SoltionPacks that a cstomer has acqired. Adding licenses Yo mst pload a license file whenever yo install a new SoltionPack or ReportPack. The license enables views and reports to display. Before yo begin Obtain the reqired license file by creating a Service Reqest on EMC Online Spport. Procedre 1. Log in to the host with administrator credentials. For example, 2. Click Administration. 3. In the Centralized Management pane, select Licenses. 4. In the Physical Overview tree, select Licenses Management. 5. In the Licenses Listing pane, click Upload. 6. In the License Upload dialog box, browse to yor license file. Click OK. Licenses in a.zip file are extracted and appear in the Licenses Listing pane. 7. When License Upload Complete appears, click OK, then click Contine. 8. If yo have remote servers in a distribted environment, click Synchronize to add the licenses to the remote servers. Deleting licenses from core software Yo can select and delete specific licenses or delete all existing licenses from the core software server. Procedre 1. Log in to with administrator credentials. For example, 2. Click Administration. 3. In the Centralized Management pane, select Licenses. 4. In the Physical Overview tree, select Licenses Management. 5. In the Licenses Listing pane, select one or more license checkboxes. 6. Click Delete. 7. If yo have remote servers in a distribted environment, click Synchronize to remove the licenses from the remote servers. Verifying core software licenses from Centralized Management Verify whether core software licenses are valid or expired for all servers in yor environment from Centralized Management. The local and remote servers listed in this view are registered with Centralized Management. Procedre 1. Log in with administrator credentials. 24 EMC Storage Resorce Management Site Installation and Configration Gide

25 Configration For example, 2. Select Licenses Management. 3. In the Licenses Listing pane, read the Expiration colmn. The EMC Watch4net Centralized Management Gide provides information abot sing Centralized Management and server registration. Configring the ser process limits for the Linx installation Increase the ser process limits for the ser accont to a maximm of This modification enables services to open files and processes when needed. Before yo begin Make sre yo have a login with root privileges. The core software installed on a server rnning Red Hat Enterprise Linx 6, CentOS Linx 6, or SUSE Linx Enterprise Server (SLES) 11. The name specified for the ser accont dring the installation. Procedre 1. Open the /etc/secrity/limits.conf file. 2. Add the following lines for the ser. In this example, the ser is apg. apg hard nofile apg soft nofile apg hard nproc apg soft nproc Save the file. 4. Type the following commands from the bin directory of the installation to restart the services:./manage-modles.sh service stop all./manage-modles.sh service start all 5. Type the following command to verify the changes: s apg -c 'limit -n -' Policy Management Yo can se defalt policies or create ser-defined policies to analyze configration changes in yor data center for compliance and to detect breaches against these policies. Creating a policy on page 26 Enabling or Disabling a policy on page 28 Editing a policy Copying a policy Deleting a policy Configring the ser process limits for the Linx installation 25

26 Configration Creating a policy Use the existing pre-defined templates to create a new policy or the empty policy template to cstomize it. Procedre 1. Click Operations. 2. Under Compliance, click Storage Compliance > Manage Rles & Policies. 3. Click Create Policy. 4. Select a template from the Select Policy from template drop-down list. 5. Click Description and provide the following details: Field Policy Name Description Type a name for the policy. Policy Description Type a brief description for the policy.- State Select Enabled or Disabled from the drop-down list if yo want the policy to rn once it is created or otherwise. Note If yo choose the state as Disabled, yo shold manally enable the policy after creating the policy to rn it. 6. Click Scope. a. To create a new ser-defined scope, click Create Scope. The Create Scope dialog box appears. b. Provide the following details: Field Name Description Type a name for the scope. Criteria Type a criteria for the scope in the following format: <Property Name> <Operator> <Vale>, sch as; devtype = 'Array' & devicetype = 'FabricSwtch' & parttype = 'port', and so on. Note Some examples of well-defined properties that can be sed in criteria are: For Switch: devtype = 'Objecttype', device = 'SwitchName'. For Fabric: parttype = 'Fabric/VSAN', part = 'FabricName'. For Array: serialnb = 'Array S/N', ip = 'IP Address', revision = 'Microcode'. For Host: domain = 'Domain Name', devdesc = 'Operating System Version', pmodel = 'HBA Model'. 26 EMC Storage Resorce Management Site Installation and Configration Gide

27 Configration Note The Criteria allows the following operators: & (AND), I (OR), and= (Eqal To). Yo can also se wild card entry, sch as, % for starts with, ends with, and contains expressions. c. Click Show Members to validate the criteria. The Show Members dialog box listing members with matching criteria appears. A warning message is displayed for invalid criteria. d. Click Save. Note The new ser-defined scope is listed in the Scope table. Click Show Members to view the list of members associated with the scope. 7. Click Rles. a. Click Create Rle. b. Select a rle name from the drop-down list. c. Doble-click a rle to enable or disable it in the corresponding State colmn of the rle. d. Doble-click a rle to set the Severity to Critical, Major, Minor, or Normal sing the drop-down list. e. To provide criteria vales for the rle, click Criteria For Selected Rle and select one of the following criteria and type a vale in the corresponding text box: Select the corresponding check box to enable the criteria or otherwise. Select LE in the drop-down list to represent the Less than or Eqal to vale for the criteria. Select EQ in the drop-down list to represent the Eqal to vale for the criteria. Select IN in the drop-down list to represent the vale(s) that the criteria contains. Note Yo can type mltiple vales that are comma separated. The vales can contain different patterns and need not be restricted only to strings. Note Rles validate objects when its vstats vale is active. The other objects are ignored. f. Click Recommendation to view the recommendation for the rle. 8. Click Schedle. a. Select a Schedle option and specify appropriate vales from the drop-down lists to rn the policy at a schedled time. 9. Click Save. Creating a policy 27

28 Configration Enabling or Disabling a policy If yo want the site to rn the policy after it is created, yo mst enable the policy. After enabling the policy, yo can stop it any time by disabling it. Procedre 1. Click Operations. 2. Under Compliance, click Storage Compliance > Manage Rles & Policies. 3. Right-click on a policy and select either: Enable - To enable the policy to rn. Disable - To disable the policy. Reconfigring the maps service If a host is setp via binary installation, or if the maps-service is installed manally in a binary installation, edit properties that affect the map service. Procedre 1. Edit the maps-service.properties. 2. Update the properties toposvc.basefeedurl and toposvc.endpointurl to se the pattern specified. # Base URL for topology feeds toposvc.basefeedurl= Topology-Service/Defalt/topology/ # URL for SPARQL endpoint toposvc.endpointurl= Topology-Service/Defalt/topology/repository/sparql <backend_hostname> represents the host where Topology Service is installed, typically the primary backend. Reconfigring generic-rsc and generic-snmp If the collector host is installed via the binary installer, or if an additional collector host is added to a vapp, se this procedre. Note Use this procedre whether or not the collector host is being sed for host and SAN discoveries. Procedre 1. Click Administration. 2. Select Centralized Management > SoltionPacks. 3. Select Independent SoltionPackBlocks. A table appears listing generic-rsc and generic-snmp. 4. Click the pencil icon. 28 EMC Storage Resorce Management Site Installation and Configration Gide

29 Configration 5. If the Topology Service has the defalt vale localhost, pdate to correct vales, and click Reconfigre. Reconfigring generic-rsc and generic-snmp 29

30

31 CHAPTER 5 Infrastrctre Preparation for Discovery and Data Collection This chapter incldes the following topics: Host preparation for discovery data collection...32 Switch configration for discovery and data collection Storage system preparation for discovery and data collection Infrastrctre Preparation for Discovery and Data Collection 31

32 Infrastrctre Preparation for Discovery and Data Collection Host preparation for discovery data collection Yo need to configre hosts to spport resorce discovery and data collection. Host configration reqired for Windows and UNIX on page 32 Windows configration for discovery and data collection on page 33 UNIX and Linx host configration for discovery and data collection on page 39 Configring ESX hosts to collect PowerPath metrics on page 42 Installing host agent software on Windows hosts on page 42 Host configration reqired for Windows and UNIX Considerations for hostname and IP address In order to discover and collect data from these hosts yo have to configre varios parameters. Considerations for hostname and IP address on page 32 Considerations for SNIA libraries and HBA drivers on page 32 Yo have to follow these gidelines to ensre a sccessfl host discovery and data collection. The host names are in Domain Name Server (DNS) format with flly qalified domain name (FQDN). IP addresses are registered with the appropriate domain name servers and resolve for a reverse DNS lookp. Hostname labels can contain only the lowercase ASCII letters a throgh z, the digits 0 throgh 9, and the hyphen (-). No other symbols, pnctation characters, or white spaces are permitted. Note Considerations for SNIA libraries and HBA drivers If SRM Site enconters a host name with an nderscore, sers may be prevented from logging in. In order to discover SNIA-qalified HBA-related information for all the host platforms yo shold ensre the right versions of SNIA library, drivers and firmware are in place. Ensre yo have EMC-spported host bs adapter (HBA) drivers and firmware. EMC Storage Resorce Management Site Spport Matrix provides information for the spported SNIA compliant version of the HBA driver. The vendor-specific SNIA libraries mst be installed on the target host. The HBA model nmber and part nmber shold be verified before pdating the hosts with SNIA libraries for HBA. Yo can install the SNIA library as part of HBA driver installation package or install the latest version of HBAnywhere (for Emlex installations) or SAN Srfer (for Qlogic installation). To discover an HP-UX host with a mlti-port Fibre Channel card, the package CommonIO bndle 0812(Dec 2008) or later shold be present on the host to obtain the pdated FC-SNIA file set. 32 EMC Storage Resorce Management Site Installation and Configration Gide

33 Infrastrctre Preparation for Discovery and Data Collection Prereqisites for Windows 2003 Hosts Specific third-party software is reqired to permit discovery. Powershell (2.0 or above) needs to be installed on the host. Powershell can be downloaded from Fcinfo is reqired to fetch HBA & Host device information. fcinfo.exe can be downloaded from details.aspx?displaylang=en&id= Use the latest version of fcinfo and the defalt install location recommended by Windows. INQ needs to be made available on the host. Platform specific INQ can be downloaded from: ftp://ftp.emc.com/pb/symm3000/inqiry/ v / The downloaded platform specific binary shold be renamed to inq and placed in any one of the below specified locations: C:\inq.exe C:\temp\inq.exe C:\windows\Temp\nl_dwd\inq.exe Windows configration for discovery and data collection For a sccessfl discovery of Windows hosts, configre a listener. One of the following listeners needs to be configred: WinRM HTTP listener with the following configration: Basic / Negotiate athentication mode shold be tre. AllowUnencrypted shold be set to tre Firewall exception to be added for port WinRM HTTPS listener with following configration: Basic / Negotiate athentication mode shold be tre. A certificate needs to be generated and placed in personal store. Firewall exception to be added for port These changes can be accomplished via two methods: Host Configration tility - To be rn on each host. Grop policy configration - To be rn on domain server. Protocol Procedre - - HTTP Creating a WSMAN listener for HTTP on page 34 HTTPS Generating a certificate on page 35 Creating a WSMAN listener for HTTPS on page 37 Prereqisites for Windows 2003 Hosts 33

34 Infrastrctre Preparation for Discovery and Data Collection Creating a WSMAN listener for HTTP In order to discover remote Windows hosts and collect performance data, yo have to configre Windows Remote Management (WinRM) service that is sed by the remote shell collector. Before yo begin This procedre reqires hostconfig-srm.ps1 script, which is packaged along with SoltionPack for Physical Hosts. It is <APG Home Directory/ Collecting/Remote Shell Collector/Generic-RSC/scripts/windows> Procedre 1. Rn the Host-configration powershell script on the target host to set the prereqisite: C:\Users\administrator.PLUGIN\Desktop>.\hostconfig-srm.ps1 -verify -athtype BasicThis verifies the existing settings on Host - script and prints stats message for varios configrations An example snippet on how the script is sed: ################################################################# linbgb109.plgin.srm1.com : STATUS-OK :WinRM service already started linbgb109.plgin.srm1.com : STATUS-ERROR :No Listener present for WSMAN on the host. Please create a listener sing the command" winrm create winrm/config/listener?address=*+transport=http linbgb109.plgin.srm1.com : STATUS-OK : A firewall exception rle with Name: Windows Remote Management(Http-In), Program: System, LocalPort:5985 present already and is enabled. linbgb109.plgin.srm1.com : STATUS-ERROR : Basic Athentication mode is set to false. Please rn the script with "-set " option OR set it to tre sing the command - winrm set winrm/config/service/ ="tre"} linbgb109.plgin.srm1.com : STATUS-OK : AllowUnencrypted is set to tre already linbgb109.plgin.srm1.com : Not ready for sccessfl WSMAN discovery from SRM Site. Please verify the settings ################################################################# 2. To enable or set any incorrect settings, rn script with "-set " option: C:\Users \administrator.plugin\desktop>.\hostconfig-srm.ps1 -set -athtype Basic An example snippet on how the script is sed prompting for ser inpts for varios settings: linbgb109.plgin.srm1.com : STATUS-OK :WinRM service already started Are yo sre that yo want to create a listener for accepting WSMAN reqests on this host?(yes/no): yes Creating Listener for WSMAN Listener for WSMAN created sccessflly linbgb109.plgin.srm1.com : STATUS-OK : A firewall exception rle with Name: Windows Remote Management(Http-In), Program: System, LocalPort:5985 present already and is enabled. Are yo sre that yo want to set Basic athentication mode to tre on this host? (yes/no): yes Setting Basic Athentication mode on the host... linbgb109.plgin.srm1.com : STATUS-OK : Basic Athentication mode is set to tre sccessflly. linbgb109.plgin.srm1.com : STATUS-OK : AllowUnencrypted is 34 EMC Storage Resorce Management Site Installation and Configration Gide

35 Infrastrctre Preparation for Discovery and Data Collection already set to tre on the host ################################################################### ########################## 3. To verify the new settings, rn the script with "-verify " option: C:\Users \administrator.plugin\desktop>.\hostconfig-srm.ps1 -verify - athtype Basic An example snippet verifying the WSMAN configration settings on the host. ################################################################# linbgb109.plgin.srm1.com : STATUS-OK :WinRM service already started linbgb109.plgin.srm1.com : STATUS-OK : Listener for accepting WSMAN reqests is present already. linbgb109.plgin.srm1.com : STATUS-OK : A firewall exception rle with Name: Windows Remote Management(Http-In), Program: System, LocalPort:5985 present already and is enabled. linbgb109.plgin.srm1.com : STATUS-OK : Basic Athentication mode is set to tre already. linbgb109.plgin.srm1.com : STATUS-OK : AllowUnencrypted is set to tre already linbgb109.plgin.srm1.com : WSMAN Prereqisite check completed for sccessfl discovery ################################################################# 4. To get help, rn the script with the -help option: C:\Users\administrator.PLUGIN \Desktop>.\hostconfig-srm.ps1 -help Generating a certificate WinRM HTTPS reqires a local compter server athentication certificate that is not expired, revoked, or self-signed to be installed. Perform the following to create certificates: Procedre 1. Generate a.pfx certificate on page Exporting the.pfx certificate on page Importing the.pfx certificate on page Generate a.cer file on page Import the.cer file on page 36 Generating a.pfx certificate Yo can generate the reqired certificate sing any certificate generator. This procedre demonstrates generating a certificate sing makecert. Procedre 1. From the command prompt, rn C:\>makecert.exe -ss MY -sr LocalMachine -n "CN=<certificatename>" -sky exchange -pe -a sha1 - ek This creates a certificate nder the personal store. Use the following steps to verify the certificate created sing makecert. 2. On a Windows host, click Start > Rn. 3. Type mmc and click OK. The Console window appears. Windows configration for discovery and data collection 35

36 Infrastrctre Preparation for Discovery and Data Collection 4. Click File > Add/Remove Snap-in. 5. Select Certificates nder Available snap-ins and click Add. 6. Select Compter accont. 7. Click Finish. 8. Click OK in the Add or Remove snap ins window. 9. On the left pane, doble click Certificates (Local Compter) > Personal > Certificates. 10.On the right pane doble click the certificate listed. 11.Navigate to Details tab. Select Sbject to get the CN Name and Thmbprint to get the Thmbprint of the certificate. Note the CN Name and Thmbprint vale, which will be sed later while creating a WSMAN listener for HTTPS. Exporting the.pfx certificate To se the same certificate on mltiple hosts, the generated certificate has to be imported on other hosts. Procedre 1. On a Windows host, click Start > Rn. 2. Type mmc and click OK. 3. In the Console window, click Certificates (local Compter) > Personal > Certificates. 4. Doble-click Certificates. 5. Under Details, click Copy to File. 6. In the Certificate Export Wizard select Yes, export the private key. and click Next. 7. Select Inclde all certificates in the certification path if possible and click Next. 8. Type a password for the private key. This password is sed when yo import this certificate on other hosts. 9. Type a filename and save the.pfx file. Importing the.pfx certificate Yo have to import the.pfx on other hosts if yo want to se the same certificate on mltiple hosts. Before yo begin The.pfx certificate mst be copied on the host where it is to be imported. Procedre 1. On a Windows host, click Start > Rn. 2. Type mmc and click OK. 3. In the Console window, click Certificates (Local Compter) > Personal > Certificates 4. Right-click and select All Tasks > Import. 5. In the browse window, select the.pfx certificate and click OK. 36 EMC Storage Resorce Management Site Installation and Configration Gide

37 Infrastrctre Preparation for Discovery and Data Collection Generating a.cer file The.cer file is created from a.pfx certificate with only a pblic key, which is sed along with the private key for a sccessfl handshake between the client and server. Procedre 1. Go to Start > Rn > mmc > Certificates (Local Compter) > Personal > Certificates 2. Doble-click Certificates. 3. Under Details, click Copy to File. 4. Select No, do not export the private keys. 5. Selecting the Encoding type as DER or Base-64, and click Next. 6. Type a file name and click Save. Importing a.cer file Yo have to import the.cer file on the collector host to enable a sccessfl handshake between the server and the client. Procedre 1. Copy the.cer file on the collector host. 2. Log in to the collector. Creating a WSMAN listener for HTTPS 3. Rn the command /opt/apg/java/sn-jre/6.045/bin/keytool - import -file <Pblic_Certificate_File> -keystore /opt/apg/java/sn-jre/ 6.045/lib/secrity/cacerts -alias <Name> The command prompts for keystore s password. The defalt password is changeit. A sample otpt retrned by the command: Owner: CN=linbgm071 Isser: CN=Root Agency Serial nmber: f029a894c741bcb83d58a5d Valid from: Te Dec 10 11:59:03 EST 2013 ntil: Sat Dec 31 18:59:59 EST 2039 Certificate fingerprints: MD5: 99:2A:6E:DC:CD:D7:7E:7D:07:C3:E2:8A:8F:E1:BB:DD SHA1: 17:29:F4:45:99:AE:DC:C5:08:C6:73:D4:CF:A6:BE:7E:79:48:50:76 Signatre algorithm name: SHA1withRSA Version: 3 Extensions: #1: ObjectId: Criticality=false #2: ObjectId: Criticality=false ExtendedKeyUsages [ serverath ] Trst this certificate? [no]: yes Yo have to create a WinRM HTTPS listener to enable a handshake between the server and client for a sccessfl discovery and data collection of Windows hosts. Before yo begin Ensre the server athentication certificate is placed in the location Console Root/ Certificates/Personal Procedre 1. Provide the Thmbprint and CN (certificate host name) details in the server athentication certificate when yo rn the script: C:\Users Windows configration for discovery and data collection 37

38 Infrastrctre Preparation for Discovery and Data Collection Configring grop policy \administrator.plugin\desktop> hostconfig-srm.ps1 -set-athtype Basic -ssl -thmbprint "aaa0ffd0ceac6165e33f480bc98a56573cade9e9" - CN <hostname> An example snippet on how the script is sed. ################################################################### ################# linbgb109.plgin.srm1.com : STATUS-OK :WinRM service already started linbgb109.plgin.srm1.com : STATUS-OK :Certificate with Thmbprint: aaa0ffd0ceac6165e33f480bc98a56573cade9e9 and Hostname: linbgb109.plgin.srm1.com has been configred to listen on port 5986 linbgb109.plgin.srm1.com : STATUS-OK : A firewall exception rle with Name: Windows Remote Management(Http-In), Program: System, LocalPort:5986 present already and is enabled. linbgb109.plgin.srm1.com : STATUS-OK : Basic Ath mode is already set to tre on the host linbgb109.plgin.srm1.com : STATUS-OK : AllowUnencrypted is already set to treon the host ################################################################### ################# Use a grop policy if yo do not want to manally set the configration on each and every host (either manally or sing a script). The grop policy lets yo apply a set of configrations across a set of hosts. Yo have to configre the grop policy so that it can be applied across hosts as reqired. Procedre 1. Right-click Compter and select Manage. 2. Go to Featres > Grop Policy Management > Forest Domain name > Domains > Domain Name > Defalt Domain Policy. 3. Right-click Defalt Domain Policy and select Edit. The grop policy editor appears. 4. Select Defalt Domain Policy > Compter Configration > Policies > Administrative Templates > Windows Components > Windows Remote Management. 5. Modify the following parameters as reqired: Allow atomatic configration of listeners Allow basic athentication Allow CredSSP athentication Allow encrypted traffic Disallow Kerberos athentication Disallow Negotiate athentication specify channel binding token hardening level Trn on http compatibility listener Trn on https compatibility listener 38 EMC Storage Resorce Management Site Installation and Configration Gide

39 Infrastrctre Preparation for Discovery and Data Collection Configring firewall port exception sing grop policy Yo have to configre firewall port exception sing grop policy if yo are not sing defalt ports. Procedre 1. Click Compter. 2. Go to Compter Configrations > Policies > Windows Settings > Windows Firewall with Advanced Secrity > Inbond Rles 3. Create a new inbond rle This enables the WinRM commnication. Updating grop policy If yo pdate the grop policy on a domain controller, the changes are reflected on the compters that are part of the domain in approximately mintes. Use this procedre to force pdate the grop policy on the member compters. Procedre 1. Yo can se any of the options for force pdate of grop policy: Option Rn the command gppdate/force on all the member compters. This command reslts in a fetch operation for the grop policy Change the Grop Policy Refresh Interval in the Grop Policy Management editor nder Compter Configration > Administrative Templates > System > Grop Policy Comment This command has to be rn on all the hosts and hence maybe cmbersome. Minimm possible time is 7 mintes. Redcing refresh interval is not recommended as it increases the load o the network. UNIX and Linx host configration for discovery and data collection Configring sdo for host discovery In order to discover Linx and UNIX hosts and collect data from these hosts yo have to configre sdo as many discovery and data collection commands reqire root privileges. Yo have to generate a valid pblic and private key pair for the SSH key based athentication method of discovering UNIX hosts. Configring sdo for host discovery on page 39 Generating a pblic and private key pair for SSH key based athentication on page 40 In order to discover Linx and UNIX hosts yo mst configre sdo to elevate the ser privileges to root privileges for select commands. Procedre 1. Inclde the path of sdo command in the environment variable $PATH for the sdo ser. The variable $PATH can be set either in /etc/environment or /etc/defalt/ login or any other OS specific file. UNIX and Linx host configration for discovery and data collection 39

40 Infrastrctre Preparation for Discovery and Data Collection 2. Inclde the paths of OS commands in the environment variable $PATH for sdo ser. By defalt, most of the command files have the following location: /sr/local/ sbin:/sr/local/bin:/sbin:/bin:/sr/sbin:/sr/bin 3. Verify that the $PATH is correct. a. Log in as sdo ser b. Type which sdo. 4. Ensre that the sdoers file is available. By defalt, the sdoers file is available in /etc or /opt/sfw/etc/ or /sr/ local/etc/sdoers 5. Ensre that the sdo ser has root privilege to rn the following commands on a given host. Some packages are not installed by defalt. inq powermt sar mpstat vxdisk (Solaris) dmidecode (Linx) vgs (Linx) lvdisplay (Linx) vgdisplay (HP-UX) pvs (Linx) Generating a pblic and private key pair for SSH key based athentication While sing the SSH key based athentication to discover UNIX hosts, yo can choose any key generation tool to generate a valid pblic and private key pair. Before yo begin Yo mst have a pblic key present on all the UNIX hosts that are to be discovered sing the private key. These steps describe the procedre to generate a pblic and private key pair for UNIX hosts sing the ssh-keygen tool. Procedre 1. For UNIX hosts that are not part of SRM Site, generate a pblic and private key pair sing the command ssh-keygen -t rsa -f <location_of_the_private_key/ name_of_ private_key_file> -N "". For example: ssh-keygen -t rsa -f /root/.ssh/id_rsa -N 2. Ensre that the pblic and private key pair that is generated has the following permissions: chmod 600 /root/.ssh/id_rsa chmod 644 /root/.ssh/id_rsa.pb The private key file is id_rsa. 40 EMC Storage Resorce Management Site Installation and Configration Gide

41 Infrastrctre Preparation for Discovery and Data Collection The pblic key file is id_rsa.pb. 3. To make the key pair fnctional, append the pblic key to <sers home directory>/.ssh/athorized_keys in the target UNIX host sing the command cat <location_of_the_private_key/name_of_private_key_file> >> <sers home directory>/.ssh/athorized_keys For example: cat /root/.ssh/id_rsa.pb >> /root/.ssh/athorized_keys 4. Place the generated private key in the RSC conf folder /opt/apg/collecting/ Remote-Shell-Collector/<instance_of_collector>/conf 5. Change the owner by rnning the command chown apg:apg <private_key_file> 6. Click Administration. 7. Under Centralized Management, click SoltionPacks > Independent SoltionPackBlocks and select the reqired instance. The SoltionPack Reconfigration dialog box appears. 8. Select the Athentication type as Pblic key based. 9. Type the location of the private key /opt/apg/collecting/remote-shell- Collector/<instance_of_collector>/conf/<name of private key> 10.Click Reconfigre. 11.Verify the changes in host-definiton.xml file located in the <APG>/ Collecting /Remote-Shell-Collector/<Instance_of_collector>/ conf directory. Configring VIOS (VIO Server) for discovery Create a sdo ser and provide the sdo ser credentials while discovering the VIO Server When the VIOS Server is installed the padmin ser is atomatically created and this ser provides restricted shell access. The Storage Resorce Management Site 3.0 host data collection mechanism does not work in the restricted shell environment, hence the need to create and configre the sdo ser. Configring sdo for host discovery on page 39 The VIO Server and VIO Clients needs to be discovered sing Generic-RSC independent block. Configring ESX hosts to collect PowerPath metrics Provides information abot configring ESX host to collect PowerPath metrics. Before yo begin Ensre that PowerPath/VE remote CLI (rpowermt) is installed on the host and enable performance collection by rnning the rpowermt set perfmon={on [interval=<#seconds>] off} host=host_fqdn command. The EMC Storage Resorce Management Site Spport Matrix provides more information on spported PowerPath versions. Register ESX and enable performance for reporting. Refer to the Powerpath /Ve or Rtools docmentation abot how to register an ESX server and enable performance. Configre the host where RTOOLS resides in generic-rsc based on the operating system type (ESX-LINUX or ESX-Windows). Configring VIOS (VIO Server) for discovery 41

42 Infrastrctre Preparation for Discovery and Data Collection To collect PowerPath metrics, do the following: Procedre 1. Create a lockbox. 2. Update host sername and password in the lockbox. The PowerPath/VE for VMware vsphere Installation and Administration Gide provides detailed description of performing the above steps. PowerPath reports can also be accessed from Explore View > Host > Storage Connectivity. Configring hosts to collect PowerPath metrics PowerPath reports are available for the SoltionPack for IBM LPAR. Provides information abot configring host to collect PowerPath metrics. To collect PowerPath metrics, do the following: Procedre 1. Install PowerPath CLI (powermt) on the host. 2. Enable performance collection by rnning the powermt set perfmon={on [interval=<#seconds>] off} command. Note The EMC Storage Resorce Management Site Spport Matrix provides more information on spported PowerPath versions. Installing EMC Host Interface on Windows Server The EMC Host Interface is host agent software which enables Storage Resorce Management Site to collect data from spported hosts withot reqiring host credentials. The EMC Host Interface software is installed as a Windows service on spported Windows hosts to enable data collection between the host and SRM Site. The installer atomatically installs a prereqisite ( Microsoft Visal C Service Pack 1 Redistribtable) before installing the EMC Host Interface software. Yo can choose local or LDAP athentication when installing EMC Host Interface. For both local and LDAP athentication, local database files are protected and encrypted sing the RSA Common Secrity Toolkit. Local athentication The local athentication option installs a database on the local host which maintains athentication with a sername and password. LDAP athentication The LDAP athentication option configres athentication sing an LDAP server providing centralized control of athentication credentials. 42 EMC Storage Resorce Management Site Installation and Configration Gide

43 Infrastrctre Preparation for Discovery and Data Collection Installing EMC Host Interface with local athentication Install the EMC Host Interface from the command line sing the LOCAL athentication option. Before yo begin Conslt the EMC Storage Resorce Management Site Spport Matrix for information on spported Windows host operating systems on which yo can install EMC Host Interface software. This procedre describes the commands and parameters sed to install the EMC Host Interface on a single server. Yo can also rn the installer sing remote psh technology that spports MSI/EXE and se the parameters and psh technology options to control the installation. Procedre 1. Download the Storage Resorce Management Site version Host Interface Setp File (emc-host-interface-version-platform.exe) to a temporary location on the local host. 2. Open a command prompt and navigate to the temporary location. 3. Constrct the exectable syntax from the command line sing the following secrity parameters. Option Description SECURITY LOCAL - database maintained on local machine USER LBPASS 4. Do one of the following: Username for athentication. Defalt: admin Password to be given to LOCAL ser, min length 8, max length 40, alpha nmber mix reqired, mixed case reqired. Defalt: #1Password Establish local athentication sing the defalt credentials (admin/#1password) as shown in the following example: C:/temp/ Emc-host-interface.exe Specify local athentication and provide yor own credentials as shown in the following example: C:/temp/Emc-host-interface.exe SECURITY=LOCAL USER=myaccont LBPASS=$4Secret Reslts Yo can se these credentials when accessing the host sing the SoltionPack for Physical Hosts. After yo finish Verify installation by accessing the log file in: install_dir\log \installation.log Trobleshoot rntime isses by accessing the log file in: install_dir\log \cimomlog.txt Installing EMC Host Interface on Windows Server 43

44 Infrastrctre Preparation for Discovery and Data Collection Installing EMC Host Interface with LDAP athentication Install the EMC Host Interface and configre LDAP athentication sing the command line. Before yo begin Conslt the EMC Storage Resorce Management Site Spport Matrix for information on spported Windows host operating systems on which yo can install EMC Host Interface software. This procedre describes the commands and parameters sed to install the EMC Host Interface on a single server. Yo can also rn the installer sing remote psh technology that spports MSI/EXE and se the parameters and psh technology options to control the installation. Procedre 1. Download the Storage Resorce Management Site version Host Interface Setp File (emc_host_interface-version-platform.exe) to a temporary location on the local host. 2. Open a command prompt and navigate to the temporary location. 3. Constrct the exectable syntax from the command line sing the following secrity parameters. Option SECURITY USER LBPASS Description LDAP - Use provided LDAP Athority Represents LDAP ser to be given access rights. Password to be given to secre lockbox store holding LDAP configration information, min length 8, max length 40, alpha nmber mix reqired, mixed case reqired. Defalt: #1Password PORT Port nmber of the LDAP service. Defalt: 389 SERVER DOMAIN BINDPASS USERSEARCH Hostname or IP Address of the LDAP server to se for athentication. There is no defalt vale. Distingished Name (DN) of the privileged accont sed to perform operations, sch as searching sers and grops, on the LDAP directory. There is no defalt vale. Password of the privileged accont for accessing LDAP server. There is no defalt vale. DN of the node at which to begin ser searches. GROUPSEARCH DN of the node at which to begin grop searches. There is no defalt vale. CONFIGNAME Name of this LDAP configration/athority, when logging with agent pack se CONFIGNAME/USER. There is no defalt vale. 4. Establish LDAP athentication as shown in the following example: Emc-host-interface.exe SECURITY=LDAP USER=myldapser LBPASS= $4Secret PORT=389 SERVER=ldap.company.com DOMAIN= id=admin, o=administrators,o=topologymanagement,o=netscaperoot BINDPASS=Password USERSEARCH= o=people,dc=emc,dc=localdomain GROUPSEARCH= o=grops,dc=emc,dc=localdomain CONFIGNAME= company.localdomain 44 EMC Storage Resorce Management Site Installation and Configration Gide

45 Infrastrctre Preparation for Discovery and Data Collection Reslts Yo can se these credentials when accessing the host sing the SoltionPack for Physical Hosts. For example, se credentials: Username: company.localdomain\myldapser Password: ldap_ser_password After yo finish Verify installation by accessing the log file in: install_dir\log \installation.log Trobleshoot rntime isses by accessing the log file in: install_dir\log \cimomlog.txt Switch configration for discovery and data collection Brocade switch configration Configring Brocade SMI Agents Yo need to configre switches to spport switch discovery, data collection, and alert consolidation. Brocade switch configration on page 45 Cisco switch configration on page 46 Yo need to configre Brocade switches and the SMI agents to spport switch discovery, data collection and alert consolidation. Configring Brocade SMI Agents on page 45 Configring Brocade switches for alert consolidation on page 46 Yo have to install and configre the Brocade SMI Agent in order to enable zoning discovery. Procedre 1. Install CMCNE with one of the following options an option of either an integrated Brocade SMI Agent (SAN with Brocade SMI Agent) or jst the Brocade SMI Agent only (headless installation). Option integrated Brocade SMI Agent (SAN with Brocade SMI Agent) Brocade SMI Agent only (headless installation) Description The Brocade SMI agent is integrated with CMCNE, BNA, CMDCE, DCFM and gets installed when yo install any of these prodcts. Yo can se this option if yo do not want to install CMCNE, BNA, CMDCE, or DCFM. The CMCNE or CMDCE and/or Brocade SMI Agent docmentation provides details on installation and configration instrctions. Switch configration for discovery and data collection 45

46 Infrastrctre Preparation for Discovery and Data Collection Configring Brocade switches for alert consolidation Use this procedre to configre forwarding of alert traps (SNMP v1) from Brocade switches to the site. Procedre 1. Log into the Brocade FC switch as the administrator. 2. Type snmpconfig set snmpv1, and press Enter. 3. Type the following details, when prompted: Option Commnity Trap recipient's IP address Trap recipient severity level Trap recipient port Inpt [pblic] The SRM Site trap recipient IP which, in a single vapp installation is the SRM Site IP, and in a distribted environment, is the site's Backend IP. (0..5) 2041, which is the SRM Site trap listening port. Cisco switch configration Performing pre-configration tasks 4. If yo have mltiple Brocade FC switches in yor storage environment, repeat this procedre on each switch. Yo need to configre Cisco switches to spport discovery, data collection, and alert consolidation. SRM Site spports two modes of SNMP commnications for Cisco switches: the less secre SNMPv1/v2 mode and more secre SNMPv3 mode. Yo have to perform the following procedres as part of Cisco switch configration: Pre-configration tasks on page 46 Configre switches for SNMPv1 and SNMPv2 on page 47 Configre switches for SNMPv3 on page 47 Configre Cisco switches for alert consolidation on page 48 Before yo discover a Cisco switch in SRM Site yo need to perform the following checks. All switches in the Cisco fabric mst have the same SNMP credentials for se with SRM Site. For example, if the SNMPv1/v2 commnity setting private is sed, all Cisco switches in the fabric shold have the SNMPv1/v2 private commnity name set with a role of network-admin. For an SNMPv3 ser, the same SNMPv3 credentials with the role of network-admin shold be set on every switch in the fabric. Procedre 1. Ensre all hardware, inclding the switch model, and software is listed as spported in the EMC Storage Resorce Management Site Spport Matrix. 2. Verify the TCP/IP connectivity to the switches to be discovered. Test by issing a ping command to these switches. 46 EMC Storage Resorce Management Site Installation and Configration Gide

47 Infrastrctre Preparation for Discovery and Data Collection Configring switches for SNMPv1 and SNMPv2 3. Determine if SNMP traps are enabled. Log in to the switch and rn the command show snmp trap. 4. Rn the command snmp-server enable traps to enable SNMP traps. SWDevCisco8-9216i# config terminal Enter configration commands, one per line. End with CNTL/Z. SWDevCisco8-9216i (config)# snmp-server enable traps 5. Display the traps that are enabled. Execte the show snmp trap command. The vales in the Enabled colmn shold be Yes. Yo have to configre Cisco switches for SNMPv1 or SNMPv2 to enable discovery, data collection, and alert consolidation for the switches. The SNMPv1 or SNMPv2 information yo provide when performing discovery is necessary for SRM Site to contact the switch to obtain information. Before yo begin Ensre that the Cisco switches have an SNMPv1 commnity name that has read only privileges set on every switch in the fabric. The SNMP commnity selected mst have a network-operator role. SRM Site collects data from the switch sing the same SNMP commnity name. It ses the SNMP port for commnication. The defalt port set is port 161. Note The Cisco docmentation provides information on configring Cisco switches for SNMPv1 and SNMPv2 management. Procedre 1. Log into the switch as an administrator. 2. To configre the snmp-server commnity string with read-only privileges, rn the following commands: Cisco8-9216i# config terminal Cisco8-9216i(config)# snmp-server commnity eccser ro Yo have to type configration commands, one per line and end with CNTL/Z. 3. To verify if the SNMPv1 commnity string exists, rn the command show snmp commnity. A sample otpt of the command: Commnity eccser Grop/Access network-operator Configring switches for SNMPv3 Yo have to configre Cisco switches for SNMPv3 to enable discovery, data collection, and alert consolidation for the switches. The SNMPv3 information yo provide when Cisco switch configration 47

48 Infrastrctre Preparation for Discovery and Data Collection performing discovery is necessary for SRM Site to contact the switch to obtain information. SRM Site collects data from the switch sing SNMPv3 secre credentials. SRM Site ses the SNMP port for commnication. SRM Site spports SNMPv3 with all the combinations of Ath (MD5, SHA) and Priv (AES, DES, NONE). Note Create the same SNMPv3 sers with the same athentication and privacy passwords on all physical switches in the fabric. The Cisco docmentation provides information on creating SNMPv3 sers on Cisco switches. This procedre provides an example of creating an SNMPv3 ser called ECCser with a network-operator role, SHA athorization, and AES128 athentication. Procedre 1. Log into the switch as an administrator. Cisco8-9216i# config terminal Enter configration commands, one per line. End with CNTL/Z. Cisco8-9216i (config)#snmp-server ser ECCser networkoperator ath sha <SHA-password> priv aes-128 <AES-password> 2. Rn the snmp-server ser commands as follows: config terminal snmp-server ser ECCser network-operator ath sha <SHApassword> priv aes-128 <AES-password> Yo have to type configration commands, one per line and end with CNTL/Z. 3. To verify the new ser creation rn the command show snmp ser. A sample otpt of the command: SNMP USERS User Ath Priv(enforce) Grops admin md5 no network-admin ECCser sha aes-128(no) network-operator NOTIFICATION TARGET USERS (configred for sending V3 Inform) User Ath Priv SWDevCisco8-9216i# Configring Cisco switches for alert consolidation Use this procedre to configre forwarding of alert traps (SNMP v1) from Cisco FC switches to the site. Procedre 1. Log into the Cisco FC switch as the administrator. 2. To enter the global configration mode, at the terminal prompt, type # config, and press Enter. Cisco docmentation provides more information on the global configration mode. 48 EMC Storage Resorce Management Site Installation and Configration Gide

49 Infrastrctre Preparation for Discovery and Data Collection 3. Type snmp-server host <trap recipient IP> traps <SNMP trap version> <Commnity String> dp-port <trap listening port >, and press Enter. In the command syntax: Syntax element <trap recipient IP> Inpt In a single vapp installation is the SRM Site IP, and in a distribted environment, is the site's Backend host IP. <SNMP trap version> version 1 <Commnity String> pblic <trap listening port > 2041, which is the SRM Site trap listening port. Example: snmp-server host traps version 1 pblic dpport If yo have mltiple Cisco FC switches in yor storage environment, repeat this procedre on each switch. Storage system preparation for discovery and data collection Preparing EMC Centera Yo need to prepare storage systems for discovery and data collection. In some cases, yo may have to perform some addtional configration on the storage systems. The following information enables yo to prepare spported storage systems for discovery, data collection and alert consolidation. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for EMC Centera. Yo enable discovery and data collection for EMC Centera by installing a spported version of Centera CLI software on the SRM Site Collector host. Procedre 1. Identify the SRM Site Collector host on which yo will install the EMC Centera Viewer CLI software. 2. Install a spported version of the EMC Centera Viewer CLI on the Collector host. The EMC Centera Viewer CLI is crrently spported on Microsoft Windows Server 2008 R2. For the specific version of Centera CLI software reqired and spported Collector host operating systems, refer to the EMC Storage Resorce Management Site Spport Matrix. 3. Identify the sername (monitor role) and password. 4. Record this information for se when yo install the SoltionPack. Reslts Dring installation of the SoltionPack for EMC Centera, yo will be asked to provide the location of the CenteraViewer.jar file. Storage system preparation for discovery and data collection 49

50 Infrastrctre Preparation for Discovery and Data Collection Preparing Converged Infrastrctre Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for Converged Infrastrctre. SRM Site commnicates with Unified Infrastrctre Manager sing credentials with access to the UIM host. Procedre Preparing EMC Data Domain Preparing EMC Isilon Preparing EMC VMAX 1. Identify the ser accont credentials sed to access the UIM host. 2. Record this information for se when yo install the SoltionPack. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for EMC Data Domain. The SRM Site Collector host commnicates with EMC Data Domain sing SNMP. Yo mst enable a spported version of SNMP on any Data Domain systems that yo want Storage Resorce Management Site to poll. For details on the spported versions of SNMP sed with Data Domain, refer to the EMC Storage Resorce Management Site Spport Matrix. Procedre 1. On the Data Domain system, se the following command to view the SNMP configration: # snmp show config 2. Use the following command to add the SRM Site SNMP Collector host: # snmp add ro-commnity pblic hosts collector_host. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for EMC Isilon. SRM Site ses SNMP to access EMC Isilon. Procedre 1. Ensre that SNMP Read-Only is activated on the EMC Isilon array. Identify the information reqired to spport data collection before installing the SoltionPack for EMC VMAX and perform the necessary pre-configration. SRM Site reqires EMC Soltions Enabler to collect array topology details for VMAX arrays; optionally SRM Site reqires UniSphere for VMAX and/or the EMC SMI-S Provider to collect array performance details. If both EMC Soltions Enabler and EMC SMI-S Provider are present, they mst be on the same host. There are two spported scenarios for topology collection. The Soltions Enabler proxy scenario is recommended becase the Collector and the Soltions Enabler are not competing for host resorces. Soltions Enabler proxy scenario (recommended) In this scenario, yo install Soltions Enabler on the SRM Site Collector host designated to collect data from VMAX. 50 EMC Storage Resorce Management Site Installation and Configration Gide

51 Infrastrctre Preparation for Discovery and Data Collection Yo configre Soltions Enabler to commnicate over TCP/IP with a Soltions Enabler instance on the remote SYMAPI server (Array Provider). Yo shold add two additional gatekeepers to the host that is already monitoring the Symmetrix array. To spport collection sing the SYMAPI Server, two additional gatekeepers will be reqired per array on the remote Soltions Enabler host. For example, if there are already six gatekeepers per array then yo will need to add two more for a total of eight gatekeepers per array. Local Soltions Enabler scenario The Local Soltions Enabler scenario spports topology collection for VMAX arrays sing a VMAX Soltion Pack Collector which has been installed on the same host as the Soltion Enabler software. Implementing the Local Soltions Enabler scenario incldes the advantages of redced network calls and a more secre configration. However, the Collector software will reqire additional Soltions Enabler host CPU and memory resorces. The Soltions Enabler (proxy) scenario is the preferred configration since the Collector and Soltions Enabler are not competing for host resorces. The Local Soltions Enabler scenario reqires that each VMAX array have at least 6 Gatekeeper Devices be created on the host. Note If the Soltions Enabler was installed to a Virtal Machine then Raw Device Mappings mst sed when creating the Gatekeeper Devices If the Local Soltions Enabler is desired and if VMAX LUN Performance details are reqired, then it is recommended that yo install the EMC SMI-S Provider kit on yor host since it incldes the reqired Soltions Enabler components. This is in contrast to installing a standalone Soltions Enabler kit and then installing the SMI-S Provider over it which cold potentially case incompatibility isses if the Soltions Enabler versions are different. Refer to EMC SMI-S Provider docmentation for installation details. Soltions Enabler proxy scenario The Soltions Enabler proxy scenario spports resorce discovery and data collection for EMC VMAX. In this scenario, no SRM Site software is installed on the SYMAPI server. Instead, a client host and server host proxy relationship is configred. This is the preferred configration for monitoring VMAX arrays. Client host - Yo install Soltions Enabler on the SRM Site Collector host designated to collect data from VMAX. The client host has no direct connectivity to the array. Server host - Soltions Enabler already exists on the SYMAPI server with connectivity and gatekeeper access to the array. The client host is then configred for proxy commnicate with the server host over TCP/IP (port 2707, which is the defalt). In this scenario, map two additional gatekeeper devices to yor SYMAPI server. Preparing EMC VMAX 51

52 Infrastrctre Preparation for Discovery and Data Collection Configring Soltions Enabler proxy spport Configre spport for the Soltions Enabler proxy scenario. Before yo begin Install a spported version of EMC Soltions Enabler on the SRM Site Collector host. Refer to the EMC Storage Resorce Management Site Spport Matrix for spported versions sed with SRM Site. In a proxy configration, yo mst maintain the same Soltions Enabler family version. A mixed 32-bit and 64-bit Soltion Enabler is spported in a proxy configration. Map two additional gatekeeper devices for SRM Site and present them to yor SYMAPI server. Ensre the storsrvd daemon is rnning on the Server host. Yo can confirm this by issing the stordaemon list command on the Server host. This procedre is applicable for Soltions Enabler or the Soltions Enabler installed with the EMC SMI-S Provider. Procedre 1. On the client host on which yo installed Soltions Enabler, navigate to the netcnfg file. On Linx, the file is located at: /var/symapi/config/netcnfg. On Windows the file is located at:..\program Files\EMC\SYMAPI\config 2. Edit the file to add the remote host to which Soltions Enabler will commnicate. Add a line similar to to the last line in the following example: # This is a sample config -- where is a valid IP address. # # Please se this format for yor host. # # # # SYMAPI_SERVER - TCPIP node # # SYMAPI_SECURE - TCPIP node SECURE # SYMAPI_SERVER - TCPIP hostname IP-address 2707 NONSECURE Select NONSECURE when the server side is configred for NONSECURE, or ANY on the deamons_options file in the SECURITY_LEVEL section. 3. Set the following System environment variables on the client host: SYMCLI_CONNECT=SYMAPI_SERVER SYMCLI_CONNECT_TYPE=REMOTE Option Description Windows The environment variables are shown with the set command at the command prompt. To establish persistent variables se Compter > Properties > Advanced system settings. Select Environment Variables > New to create the two variables as shown above. 52 EMC Storage Resorce Management Site Installation and Configration Gide

53 Infrastrctre Preparation for Discovery and Data Collection Option Linx Description Use the env command to show the environment variables. To establish persistent variables se export to create the two variables as shown above. 4. On the SYMAPI server host, ensre that the SERVER license key is registered by reviewing the symapi\config\symapi_licenses.dat file. If it is not there, se the symlmf tility to add the license key. Yo can also control the Soltions Enabler licenses from the array. Verifying the Soltions Enabler proxy configration Verify proxy configration sccess and, if necessary, identify and resolve any configration isses. Procedre Local Soltions Enabler scenario 1. From the SYMAPI server host, typesympd list to display a list of devices that are visible to the host. Note the reslts. 2. On the client host, type sympd list. If the reslts match, the configration is complete. If the command issed from the client retrns a message sch as no devices fond, contine to the next step. 3. To isolate the isse: a. Verify that the same command works on the host with the FC connection to the Symmetrix array. b. Verify that the environment variables for Soltions Enabler are set sing the symcli -def command. c. Verify that the netcfg file has been edited sing the symcfg -services list command.command. d. Verify the arrays yo intend to monitor sing the symcfg list command. e. Verify that two additional gatekeepers are provisioned from each Symmetrix array sing the sympd list command. The local Soltions Enabler scenario spports resorce discovery and data collection for EMC VMAX. In this scenario, yo install only the SRM Site Collector software directly on the existing SYMAPI Soltions Enabler server. The Soltions Enabler proxy scenario is the preferred configration. Implementing this scenario incldes the advantages of redced network calls and a more secre configration. However, the Collector software installed on the SYMAPI server will reqire processing cycles from that server. This scenario reqires two additional gatekeeper devices be mapped to yor Collector host. Preparing EMC VMAX 53

54 Infrastrctre Preparation for Discovery and Data Collection Configring VMAX arrays for consolidation of availability alerts Preparing EMC VNX Use this procedre to configre forwarding of availability alert traps (SNMP v1) from VMAX arrays to the site. VMAX performance alerts are collected sing the discovery data collection configration. Procedre 1. Log into Soltions Enabler on the array provider host as an administrator. 2. Navigate to the daemon_options file in the C:\Program Files\EMC\SYMAPI \config\ directory. 3. In the parameter section SNMP_TRAP_CLIENT_REGISTRATION: a. Uncomment the line storevntd:snmp_trap_client_registration b. Add the SRM Site trap recipient IP to the trap filter. The trap recipient IP is the Backend host IP. The syntax is <IP>,<port>,<filter>,<state>, where <filter> is the filtering level for trap forwarding defined in the FCMGMT-MIB file. Example: , 2041,10,ACTIVE 4. In the parameter section LOG_EVENT_TARGETS, ncomment the line storevntd:log_event_targets = snmp file. 5. To identify the arrays from which traps shold be forwarded to the site, type symcfg list, and press Enter. 6. For each array that shold forward alert traps to SRM Site: a. Type symcfg list, and press Enter. b. In the parameter section LOG_SYMMETRIX_EVENTS, specify the appropriate event categories in the format: sid=<sym serial nmber>, <event category 1>, <event category 2>\ Example: SID= , disk, device, device pool, director, srdf consistency grop, srdfa session, srdf link, srdf system, service processor, environmental, diagnostic, checksm, stats, events, array sbsystem, grops, optimizer, thresh_critical=3, thresh_major=2, thresh_warning=1, thresh_info=0 ;\ 7. To reload the changes to the daemon_options file, type stordaemon action storevntd -cmd reload, and press Enter. 8. Ensre that the storevntd Event Daemon is rnning on the provider host. 9. If yo have mltiple VMAX array provider hosts in yor storage environment, repeat this procedre on each array provider host. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for EMC VNX and perform the necessary pre-configration. SRM Site ses Navisphere Secre CLI (NavisecCLI) installed on the site Collector host to access the VNX arrays. EMC recommends matching Naviseccli versions with Block Operating Environment versions of VNX systems configred in the Collector. For information on compatible Block 54 EMC Storage Resorce Management Site Installation and Configration Gide

55 Infrastrctre Preparation for Discovery and Data Collection Configring simple athentication OE and Naviseccli versions, refer to the VNX OE for Block Release Notes and the Unisphere Host Agent/CLI and Utilities Release Notes on EMC Online Spport. For block and nified data collection, yo mst enable statistics logging on the array. To enable statistics logging, refer to Unisphere docmentation. Yo can configre simple athentication with VNX arrays sing the defalt SRM Site accont. In order to poll and collect performance statistics from a VNX array, administrator privileges are reqired for the ser accont sed to access the arrays. Note The preferred method for secre polling and collection of data from VNX arrays is to configre athentication sing a Unisphere secrity file. Refer to Unisphere secrity file athentication on page 55. Procedre Unisphere secrity file athentication 1. Configre the defalt SRM Site accont (apg) with administrator privileges to access the VNX array as described in the Unisphere docmentation. 2. Validate access to the VNX array by rnning the following block command: naviseccli -h (host) -ser sername -password password -scope 0 getagent A Unisphere secrity file is the preferred method to provide secre polling and data collection from VNX arrays. By defalt, the SRM Site Collector rns sing the local system accont which is a special Windows ser with no environment. The preferred secre method is to create a Unisphere secrity file, an encrypted file stored on the Collector host. When yo create a secrity file, the sername yo se to log in to the crrent host is atomatically stored in the secrity file, or yo can specify an alternative sername for the secrity file in the -AddUserSecrity reqest sing the optional -ser switch. If yo omit the -ser switch, the secrity file ses yor crrent sername. Yo can also target the secrity file at a specific storage system sing the -ip option. Yo can store the secrity file on the Collector host and edit parser XML files to inclde this path which will provide the reqired athentication to access the arrays. Note the following: By defalt, the secrity file is stored in yor defalt home directory. With NavisecCLI, yo can specify an alternative file path sing the optional -secfilepath switch. Once the secrity file exists, yo can edit XML configration files that are sed to poll and collect data to se the path to the secrity file on the Collector host. The secrity file handles athentication. For details on configring a secrity file on a host, refer to the Unisphere docmentation. Preparing EMC VNX 55

56 Infrastrctre Preparation for Discovery and Data Collection Configring secrity file athentication Configre the Unisphere secrity file athentication on SRM Site Collector hosts that will collect data from VNX arrays. Utilize the secrity file to configre array access from the Collector host. Procedre 1. On the SRM Site Collector host designated for collecting VNX data, create the folder: \APG\Collecting\Text-Collector\context 2. Using NavisecCLI, store the secrity file into that directory as shown in the following example: naviseccli AddUserSecrity -User sername -Password password - Scope 1 secfilepath D:\Program Files\APG\Collecting\Text-Collector \context 3. Edit parser-*.xml configration files to inclde this path when commnicating with VNX arrays: Configring VNX arrays for consolidation of file alerts Preparing EMC VPLEX naviseccli secfilepath D:\Program Files\APG\Collecting \Text-Collector\context h <IP>... Configre forwarding of VNX file alerts to SRM Site. Note Consolidation of VNX block alerts does not reqire separate configration. Procedre 1. Log into Control Station as the root ser. 2. Open the nas_mcd.cfg configration file in the /nas/sys/ directory. 3. Enable the XML API service by ncommenting the following entry: daemon "XML API Server" exectable "/nas/sbin/start_xml_api_server" optional yes canexit yes atorestart yes ioaccess no 4. Type # service nas start, and press Enter to restart the XML-API service. 5. If yo have mltiple VNX arrays in yor storage environment, repeat this procedre on each VNX array. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for EMC VPLEX and perform the necessary pre-configration. SRM Site tilizes SSH to commnicate to VPLEX arrays. In addition, yo mst enable perpetal monitors and configre the maximm amont of SSH sessions. Procedre 1. Enable perpetal monitors on the VPLEX arrays. a. Log in to the VPLEX management server sing the ser credentials for the service accont. 56 EMC Storage Resorce Management Site Installation and Configration Gide

57 Infrastrctre Preparation for Discovery and Data Collection Preparing EMC VMware vcenter b. From the vplexcli prompt, type: report create-monitors. 2. Configre the maximm nmber of SSH sessions to 20. a. Log in to the VPLEX management server sing the ser credentials for the service accont. b. Type the following commands: cd /etc/ssh sdo cp sshd_config sshd_config.original sdo vi sshd_config c. At the end of the configration file, add the following line to configre the MaxSessions setting: MaxSessions 20 d. Type: sdo /etc/init.d/sshd restart Configre the Statistic-Level setting. Procedre 1. Select Administration > vcenter Server Settings > Statistics to view the Statistic-Level settings. Option Statistic-Level 3 Statistic-Level 2 Statistics collection interval Description Collects all Watch4net metrics inclding virtal-interface IO and virtal disk latency. Provides all possible reports, except virtal-interface IO and Virtal Disk Latency. Use the vale of 5 mintes, which is the defalt. If 5 Mintes is not selectable as a collection interval, configre it sing the Edit btton. This setting is mandatory. Preparing Hitachi Device Manager 2. Configre a fll read-only accont sing the vsphere client Permissions tab for vcenter objects that will be discovered. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for Hitachi Device Manager. SRM Site commnicates with the Hitachi Device Manager to poll information for HDS arrays. Procedre 1. Identify accont credentials with administrator privileges on the Hitachi Device Manager system. 2. Record the IP address/hostname for SSH and CIMOM commnication. Preparing EMC VMware vcenter 57

58 Infrastrctre Preparation for Discovery and Data Collection Preparing HP 3PAR StoreServ Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for HP 3PAR StoreServ. SRM Site commnicates with the HP 3PAR StoreServ array sing an accont with readonly privileges on the array. Procedre 1. Identify an accont with read-only privileges for the HP 3PAR StoreServ array. 2. Ensre that the array can be accessed on port 22 sing SSH. 3. Record this information for se when yo install the SoltionPack. Preparing HP EVA Preparing IBM DS Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for HP EVA. SRM Site commnicates with the HP EVA Element Manager to poll information for HP EVA arrays. Procedre 1. Identify accont credentials with administrator privileges on the HP EVA Element Manager system. 2. Record the IP address/hostname for SSH and CIMOM commnication. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for IBM DS. SRM Site commnicates with the IBM CIM/SMI-S provider that qeries the storage array. For details on spported IBM DS models, refer to the EMC Storage Resorce Management Site Spport Matrix. For details on installing and enabling provider spport on IBM DS models, refer to the appropriate IBM docmentation. Procedre 1. Depending on yor IBM DS model, do one of the following: IBM DS 3K/4K/5K models - Manally install and configre the IBM CIM/SMI-S provider on a management server. IBM DS 6K/8K models, the CIM/SMI-S provider is bilt into the Hardware Management Console (HMC). Note Ensre that the CIM agent is enabled, as it was disabled by defalt in earlier releases (e.g., prior to Release 4, Bndle ). 2. Identify the CIM sername and password sed to access the array. 3. Record this information for se when yo install the SoltionPack. 58 EMC Storage Resorce Management Site Installation and Configration Gide

59 Infrastrctre Preparation for Discovery and Data Collection Preparing IBM XIV Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for IBM XIV. SRM Site commnicates with IBM XIV sing the CIM agent. Procedre 1. Ensre CIM agent is installed. Starting with IBM XIV Storage System V10.1.0, the CIM agent is pre-installed on the administrative modle. The embedded CIM agent is atomatically enabled and preconfigred. 2. Identify the access credentials. 3. Record this information for se when yo install the SoltionPack. Preparing NetApp Filer Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for NetApp Filer. SRM Site commnicates with NetApp Filer arrays sing the NetApp CLI over SSH. Procedre Preparing VI VirtalWisdom 1. Identify the IP, sername, password, SSH Port no (defalt is 22), and NetApp Filer Mode (7-Mode or C-Mode). 2. Identify the Clster management IP for C-Mode Filer discovery. 3. Record this information for se when yo install the SoltionPack. Identify the information reqired to spport resorce discovery and data collection before installing the SoltionPack for VI VirtalWisdom and perform any necessary preconfigration. SRM Sitecollects VirtalWisdom data sing proxy software installed on the VirtalWisdom Portal Server. Download and install the proxy software on the VirtalWisdom Portal Server Procedre 1. Obtain the proxy installation package sing Virtal Instrments cstomer credentials from their SFDC portal, or from ftp.virtalinstrments.com. The package is located in the CURRENT directory. 2. Copy the installation package to the VirtalWisdom server. 3. Unzip the package into a sitable temporary directory. 4. Stop the VirtalWisdom service. 5. Open a command prompt. Note Yo may need to rn as Administrator to allow files to be copied. 6. Navigate to the temporary directory where the proxy is nzipped and rn the install.bat script. Preparing IBM XIV 59

60 Infrastrctre Preparation for Discovery and Data Collection 7. Enter the VirtalWisdom installation path. 8. Restart the VirtalWisdom service. Reslts Yo do not need to perform any addtional configration of the proxy which rns as part of the standard VirtalWisdom. After yo finish Create a VirtalWisdom ser accont dedicated for access by the SoltionPack for VI VirtalWisdom. When yo install the SoltionPack, yo will provide these credentials which are then stored on the Collector host in:apg/collecting/xml- Collector/vi-virtalwisdom/conf/VI-proxyReqest.xml. Connecting to mltiple VirtalWisdom Portal Servers If yo have more than one VirtalWisdom Portal Server, yo can combine data from mltiple Portal Servers. The data will poplate the same reports. Before yo begin Install and configre the proxy software on each VirtalWisdom Portal Server. Use this configration to collect the same metrics from all Portal Servers sing the same freqency (poll cycle) and credentials. Each host will be polled in the seqence yo specify in the configration file. Procedre 1. On the Collector host, navigate to APG/Collecting/XML-Collector/vivirtalwisdom and open the VI-collector.xml file. 2. Add one or more Portal Server hosts to the configration file by typing the additional host IP addresses. <inpt> <host>ip_address</host> <host>ip_address</host> <parameter name="connect-type"> <vale>any</vale> </parameter> 3. If the VirtalWisdom WebServices port nmbers are different for each Portal Server host, yo can remove the port nmber from the <inpt> line and append the niqe port nmbers to the host address. For example: <inpt> <host>ip_address:port</host> <host>ip_address:port</host> <parameter name="connect-type"> <vale>any</vale> </parameter> 4. Restart the VirtalWisdom collector. 60 EMC Storage Resorce Management Site Installation and Configration Gide

61 CHAPTER 6 SoltionPack Installation This chapter incldes the following topics: Access credentials reqired for SoltionPacks...62 Connecting to Centralized Management Installing a SoltionPack...65 Configration dring SoltionPack installation...66 Post-installation configration of SoltionPacks...86 Post-installation configration details SoltionPack Installation 61

62 SoltionPack Installation Access credentials reqired for SoltionPacks W4N ses different acconts when rnning SoltionPacks. Configre the necessary acconts. Table 1 Access credentials SoltionPack Access credentials - - SoltionPack for Watch4net will se the ProSphere ser accont that has system ProSphere-SCA administrator access. SoltionPack for VMware vcenter SoltionPack for Brocade FC Switch SoltionPack for Cisco MDS/Nexs SoltionPack for EMC VNX Watch4net reqires a vcenter ser accont to commnicate to the vsphere vcenter server that has Read-Only privilege and 5-minte static logging set to 3. This ser accont is different from what is reqired for ProSphere, which has a minimm privilege level of Browse DataStore and all StorageViews. This same ser accont reqested for ProSphere can be sed for Watch4net. Watch4net reqires SNMP to commnicate to each of the Brocade Switches. To discover the Zoning details from Brocade switches, the sername, password, portnmber, and SSL enabled/stats for the SMI-S provider are reqired. Watch4net reqires SNMP to commnicate to each of the Cisco MDS Switches. Watch4net reqires NavisecCLI to access the VNX arrays. The ser accont needs to have administrator privileges to collect performance statics Watch4net will se the apg ser accont: Linx defalt path - /opt/navisphere/bin To validate yor access to the VNX array, rn this block command: naviseccli -h (host) -ser <ser> -password <password> -scope 0 getagent If the cstomer has already set p the NavisecCLI secrity file and has defined the ser/password that yo will be sing, then yo can enter anything for a ser/password dring the installation becase yo will be deleting the entries in all of the text collector xml files. Yo will need to edit all of the parser files in the varios Text- Collector/conf directories as shown in step Create the following folder on the APG Server collecting the VNX Block: \APG\Collecting\Text-Collector\context 2. Then se the naviseccli command to store the secrity file into that directory: naviseccli AddUserSecrity -User (deleted) - Password (deleted) -Scope 1 secfilepath D:\Program Files\APG\Collecting\Text- Collector\context 62 EMC Storage Resorce Management Site Installation and Configration Gide

63 SoltionPack Installation Table 1 Access credentials (contined) SoltionPack Access credentials Then each call to the naviseccli (from the parser-*.xml APG configration files) shold be sed as the following: naviseccli secfilepath D:\Program Files\APG \Collecting\Text-Collector\context h <IP>... SoltionPack for EMC Isilon SoltionPack for EMC VPLEX SoltionPack for NetApp Filer Watch4net will se SSH and a ser accont. Watch4net will se SSH and a ser accont. Watch4net reqires SNMP v2c and NetApp CLI for latency to commnicate to each of thenetapp Filers v1.2. The NetApp Filer v1.2 SoltionPack will se CLI exclsively. SSH connection to the Netapp devices with the following roles: login-ssh, cli-stats*, cli-snap*,cli-aggr*, cli-vol*, cli-disk*, clienvironment, cli-nfs*, cli-cifs*,cli-df, cli-sysconfig, cli-ifconfig, cli-version Make sre we are polling the real filer (not a vfiler) Note Make sre yor hostnames are consistent. SoltionPack for IBM DS Watch4net reqires SMIS and SSH, to be configred. For IBM DS 3K/4K/5K reqires IBM SMIS Provider For IBM DS 6K/8K SoltionPack for IBM SVC/ V7000 Watch4net reqires SMIS to be configred on each of IBM Management servers. The level of privilege reqired is administrator. SVC/V7000 clster IP address/hostname for SSH & CIMOM commnication. Username and password (User reqires administrator level). Performance data retrieval will not work/be spported for monitoring secrity level SSH pblic key (to retrieve performance data files over SSH) SoltionPack for HP EVA Watch4net reqires SMIS and SSH, to be configred on each of the HP EVA ManagementHosts. The level of privilege reqired is administrator. IP address/hostname for SSH & CIMOM commnication. Username and password for the HP EVA Element Manager SoltionPack for Hitachi Device Manager Watch4net reqires SMIS and SSH, to be the HiCommand Device Manager for Hitachi Arraydata. The level of privilege reqired is administrator. IP address/hostname for SSH & CIMOM commnication Username and Password Access credentials reqired for SoltionPacks 63

64 SoltionPack Installation Table 1 Access credentials (contined) SoltionPack Access credentials - - SoltionPack for EMC This SoltionPack reqires EMC Centera CLI to be installed and Centera configred on the Collectorhost. EMC Centera CLI is available on EMC Spport Center (emc.spport.com). Note Centera Collector-Manager is spported on Windows SoltionPack for HP 3PAR StoreServ SoltionPack for EMC Data Domain Port 2 A valid accont with "browse" privileges to connect and access statistic data on the HP3PAR StoreServ2 (SSH) mst be opened between the Watch4net collector and the HP 3PAR StoreServ Array A valid accont with "browse" privileges to connect and access statistic data on the HP3PAR StoreServ Data Domain mst be configred to allow the Watch4net collector host to commnicate to it via SNMP. Utilize the following command on the Data Domain system to view the SNMP configration: # snmp show config Utilize the following command to add the Watch4net host: # snmp add ro-commnity <pblic> hosts <watch4net.collector.com> where <pblic> is the read-only commnity string SoltionPack for Microsoft Hyper-V SoltionPack for Oracle Database Hyper-V Collector Manager mst have the right to qery WMI objects from Hyper-Vhosts PowerShell mst allow the exection of nassigned PowerShell scripts Refer to the EMC ASD Storage Resorce Management W4N Prereqisite Checklist docment for Watch4net for details on how to prepare the Oracle database. The latest JDBC driver jar file needs to be in the folder /APG/Databases/JDBC-Drivers/Defalt/lib Crrently the driver is needed is ojdc5.jar SoltionPack for EMC VMAX VMAX Performance collection via EMC SMI Provider for VMAX: Username - no defalt SMI Provider Username is provided dring the deployment of SoltionPack for EMC VMAX bt the EMC SMI Provider ot-of-the-box sername is admin Password - no defalt SMI Provider Password is provided dring the deployment of SoltionPack for EMC VMAX bt the EMC SMI Provider ot-of-the-box password is #1Password VMAX Performance collection via UniSphere for VMAX: Username - the defalt is smc Password - the defalt is smc 64 EMC Storage Resorce Management Site Installation and Configration Gide

65 SoltionPack Installation Connecting to Centralized Management Connect to the server so that yo can access Centralized Management to install and administer SoltionPacks. Centralized Management is one of the mltiple web applications available in core software. Procedre 1. Open a browser. 2. Type The serverip is the flly qalified hostname or IP address of the server where core software is rnning. The port is the port nmber of the server. For example: 3. Log in. a. Defalt sername is admin. b. Defalt password is changeme. c. Click Sign In. After yo finish Yo are atomatically logged off after for hors. Installing a SoltionPack After yo log in as an administrator, yo can install a SoltionPack from Centralized Management. Before yo begin Core modles mst be p-to-date in all servers becase not all modle dependencies are validated dring the SoltionPack installation or pdate process. Core modles are modles that are not installed by a SoltionPack. Examples of core modles inclde webapps, modle-manager, license-manager, java, mysql, backend, tools, and so forth. Update these core modles: Databases, Backends, Frontends, Miscellaneos (except Blocks). Since the recommended modle pdate order varies, refer to the Modle Update Order section for the mltiple hosts or single host deployments. Also, the EMC Watch4net Centralized Management Gide provides more information. Procedre 1. Log in and select Administration. 2. Select Centralized Management in the Administration tree. 3. Select SoltionPacks in the tree. 4. Select SoltionPack Center. 5. Select the SoltionPack in the Browse and Install SoltionPacks screen. Connecting to Centralized Management 65

66 SoltionPack Installation 6. Read the smmary information and click Install. 7. Select the components to install. a. Type the instance name. b. Select the server in one or more list boxes. For example, select the server in the Data collection, Reports, and Events list boxes. c. Click Next. 8. For each list box yo select, a screen appears. a. Click Next after yo complete each screen. b. Click Install after yo complete the last screen. The installation process begins. 9. Select the maximize arrow next to each component to view the installation process. When the installation sccessflly completes, green checkmarks appear. 10.After installation is complete, select Centralized Management > SoltionPack to verify the installed SoltionPack. After yo finish Install the SoltionPack for EMC Watch4net Health if yo have not already done so. This is available from Centralized Management > SoltionPack Center. Configration dring SoltionPack installation This topic describes any reqired or sggested configration for each Storage Resorce Management Site SoltionPack dring installation. Note This information spplements the field-level assistance already provided in the SoltionPack installer ser interface for the SoltionPacks inclded in Storage Resorce Management Site. As sch, some fields which are self-explanatory or do not reqire additional configration details are omitted. Table 2 SoltionPack configration details SoltionPack Configration Details - - SoltionPack for Brocade In the Select the components to install window: FC Switch In Alert Consolidation, select the Primary Backend host. In Pre-configred alerts, select the Primary Backend host. In SMI Data Collection, select the Collector host. In Reports, select the Frontend host. In SNMP Masks, select the Frontend host. In the Pre-configred alerts window: In Alerting Web-Service Instance, select the Primary Backend host. In Recipient for alerts, provide an address. 66 EMC Storage Resorce Management Site Installation and Configration Gide

67 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Select Enable the Brocade FC Switch Port Link Utilization Alert if desired. In the SMI Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. The defalt port is In Topology Service hostname or IP address, type the Primary Backend host. In Please select the Gateway, select the Primary Backend host and gateway port: primary_backend: If this gateway is not inclded in the selected list, click Add new gateway to create a new gateway with this setting. In SMI Provider IP Address or Host Name, type the Brocade SMI-S Provider host. Provide access credentials. In Port, if sing a non-defalt port, inclde the port nmber in the address. The defalt ports are 5988 for non-ssl and 5989 for SSL. SoltionPack for Cisco MDS/Nexs In the Select the components to install window: In Alert Consolidation, select the Primary Backend host. In Pre-configred alerts, select the Primary Backend host. In Reports, select the Frontend host. In SNMP Masks, select the Frontend host. In the Pre-configred alerts window: In Alerting Web-Service Instance, select the Primary Backend host. Select Enable the Cisco Switch Port Link Utilization Alert if desired. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for Cisco UCS In the Select the components to install window: In Pre-configred alerts, select the Primary Backend host. In Data Collection, select the Collector host. In Events, select the Backend host. In Reports, select the Frontend host. In the Pre-configred alerts window: Configration dring SoltionPack installation 67

68 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In Alerting Web-Service Instance, select the Primary Backend host. In Recipient for alerts, provide an address. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. The defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In UCS type, select UCS Manager (Blade Chassis) or UCS C-Series (Server). In Hostname or IP address type the UCS management host. This is the server's management port. In Username and Password, type the credentials for the management server. In Commnication port, type the port nmber for the management server. Select the Enable events collection checkbox. In Event server hostname or IP address, select the Backend host on which the events server is rnning. The defalt port is Select Use advanced settings to configre polling settings. In the Events window: Type the database information for the events database rnning on the Primary Backend host. The defalt Database port is and the defalt Event server port nmber is In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for Converged Infrastrctre In the Select the components to install window: In Topology Collector, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is EMC Storage Resorce Management Site Installation and Configration Gide

69 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In UIM/P hostname or IP address, type the UIM/P host. In Username and Password, type the reqired credentials for the UIM/P host. In UIM/O hostname or IP address, type the UIM/P host. In Username and Password, type the reqired credentials for the UIM/O host. Select Use advanced settings to configre polling settings. Click the pls (+) sign to add additional UIM devices. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC Atmos In the Data Collection window: In Atmos Node IP, type the Atmos system management node IP address. In the Atmos System Administrator section, type the login credentials for the SysAdmin User. In the Atmos Tennant section, type the login credentials for TenantAdmin User. In Atmos CRT IP, type the Atmos Capacity Reporting Tool IP Address. In Period to Collect Data, type the polling freqency. SoltionPack for EMC Centera In the Select the components to install window: In EMC Centera Collector, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In Hostname or IP address of the management node, type the Centera Viewer CLI host. In Centera friendly name, type the name. Configration dring SoltionPack installation 69

70 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In Centera sername (monitor role) and Password, type the credentials for the management server. The defalt is system/ manager. In Path to the Centera Viewer jar file (CenteraViewer.jar), type the path to the.jar file yo configred as described in Preparing EMC Centera on page 49. Select Use advanced settings to configre polling settings. Click the pls (+) sign to add additional Centera devices. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC Data Domain In the Select the components to install window: In Reports, select the Frontend host. In SNMP Masks, select the Frontend host. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC Data Protection Advisor In the Select the components to install window: In Alert Consolidation, select the Primary Backend host. In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. The defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In Hostname or IP address type the Primary Backend host. The defalt port is Select Enable alert collection from DPA. In DPA appliance Host name or IP, type the host information for the DPA appliance. In Please select the Credentials, provide the credentials for the DPA appliance. If this is the first instance of SRM polling from the DPA instance, select Advanced Settings and Enable schedling of DPA 70 EMC Storage Resorce Management Site Installation and Configration Gide

71 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - reports. If yo do not select these options, there are no DPA reports for SRM to collect. The Polling performance intervals are set by defalt. These are configrable. Click the pls (+) sign to add additional DPA appliances. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC Host Interface In the Select the components to install window: In Data Collection, select the Collector host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is Leave Enable Topology Backend on data collected checked. In Topology Service hostname or IP address, type the Primary Backend host. In Please select the Gateway, select the Primary Backend host and gateway port: primary_backend: If this gateway is not inclded in the selected list, click Add new gateway to create a new gateway with this setting. In Host rnning Host Provider (IP or hostname), type a host on which the EMC Host Interface is installed. In Please select the Credentials, select the ser name configred when the EMC Host Interface was installed. Optionally, select the Enable Secre Connection (SSL) checkbox. If sing a secre connection, the defalt port is If sing a non-secre connection, the defalt is Click the pls (+) sign to add more hosts. SoltionPack for EMC Isilon In the Select the components to install window: In Reports, select the Frontend host. In SNMP Masks, select the Frontend host. In the Reports window: In Administration Web-Service Instance, select the Frontend host. Configration dring SoltionPack installation 71

72 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - SoltionPack for EMC In the Select the components to install window: RecoverPoint In EMC RecoverPoint Collector, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In RecoverPoint FQDN hostname, type the flly-qalified domain name of the RecoverPoint host. In Please select the Credentials, select the ser name to access the RecoverPoint host. Select Do yo want to configre advanced settings to configre polling settings. Click the pls (+) sign to add more hosts. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC ViPR In the Select the components to install window: In Data Collection, select the Collector host. In Events, select the Primary Backend Host. In Reports, select the Frontend host In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. The defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In Event server hostname or IP address, select the Backend host on which the events server is rnning. The defalt port is Enter the friendly name, provide the IP address, sername, and password of the ViPR instance. SoltionPack for EMC VMAX In the Select the components to install window: 72 EMC Storage Resorce Management Site Installation and Configration Gide

73 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In Alert Consolidation, select the Primary Backend host. In Pre-configred alerts, select the Primary Backend host. In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Pre-configred alerts window: In Alerting Web-Service Instance, select the Primary Backend host. Select the EMC VMAX Front-End Director Utilization Alert and Enable the EMC VMAX Front-End Director Port Utilization Alert checkboxes. In the Data collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In APG WebService hostname or IP address, select the Frontend host and provide the port nmber (defalt 58080) and credentials to access the Frontend Web portal. Leave Enable Topology Backend on data collected checked. In Topology Backend hostname or IP address, select the Primary Backend host. In Please select the Gateway, select the Primary Backend host and gateway port: primary_backend: If this gateway is not inclded in the selected list, click Add new gateway to create a new gateway with this setting. Leave Configre Unisphere performance collection checked. In Unisphere hostname or IP address, select the host on which Unisphere for VMAX is rnning and change the defalt Unisphere network port, Username and Password if different. Click the pls (+) sign to add additional Unisphere hosts. If Soltions Enabler was installed in the defalt location, leave the Soltions Enabler bin directory empty. If installed in another location, type the path to the bin directory. In Connection type, select Remote if yo are sing the Soltions Enabler proxy scenario or Local if yo are sing a local Soltions Enabler scenario. Refer to Preparing EMC VMAX on page 50 Configration dring SoltionPack installation 73

74 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In SYMAPI Connection name, type the connection name. This is the name of a netconfig file, not a host. To view the name that is configred, se the symcfg list -services command. In the VMAX array configration section of the Data collection window, yo add the serial nmber of each array from which yo want to collect data. Rn the symcfg list command to view a list of arrays. In Array Fll Serial Nmber, type the Symmetrix SID from which data will be collected by Soltions Enabler or SMI-S. Click the pls (+) icon to add additional SIDs. Note EMC recommends not to exceed six medim-sized (30K-40K devices) VMAX arrays for each VMAX collector. Select Use advanced settings to configre polling settings. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC VNX In the Select the components to install window: In Alert Consolidation, select the Primary Backend host. In Pre-configred alerts, select the Primary Backend host. In Data Collection, select the Collector host. In Events, select the Primary Backend Host. In Reports, select the Frontend host. In the Pre-configred alerts window: In Alerting Web-Service Instance, select the Primary Backend host. Select the EMC VNX Block SP Utilization Alert and Enable the EMC VNX Block Dirty Pages Utilization Alert checkboxes. In the Data collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In APG WebService hostname or IP address, select the Frontend host and provide the port nmber (defalt 58080) and credentials to access the Frontend Web portal. 74 EMC Storage Resorce Management Site Installation and Configration Gide

75 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Leave Enable Topology Backend on data collected checked. In Topology Service hostname or IP address, select the Primary Backend host. In Please select the Gateway, select the Primary Backend host and gateway port: primary_backend: If this gateway is not inclded in the selected list, click Add new gateway to create a new gateway with this setting. In Event server hostname or IP address, select the Backend host on which the Events Listener is installed. The defalt port is In Alert Event server hostname or IP address, select the Primary Backend host. The defalt port is In Naviseccli Path, type the path if sing a non-defalt path, or leave blank if yo are sing the defalt path. In VNX type, select Block, File or Unified. In Uniqe friendly name for the VNX system, type the name. In SP A IP, type the IP address of the SPA. In SP B IP, type the IP address of the SPB. In Use Naviseccli secrity file, select this checkbox if yo are sing the secrity file. In User Scope, select LDAP, Global or Local. In Naviseccli Username and Naviseccli Password, type the Naviseccli credentials for the block storage systems. In Primary control station IP, type the IP address of the primary control station. In Secondary control station IP, type the IP address of the secondary control station. In VNX File sername and VNX File password, type the credentials for the file storage system. Use the pls (+) icon to add more VNX arrays. Select Use advanced settings to configre polling settings. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC VPLEX In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data collection window: Configration dring SoltionPack installation 75

76 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In VPLEX type, select Geo/Metro or Local. Provide clster host and athentication details for VPLEX systems. Use the pls (+) icon to add more VPEX systems. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for EMC Watch4net Health Install this SoltionPack on all core softwarehosts in yor environment. In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for Hitachi Device Manager In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is EMC Storage Resorce Management Site Installation and Configration Gide

77 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In Hitachi Device Manager, type the Hitachi Device Manager CIM server host. In Username and Password, type the reqired credentials. Optionally, select the Enable Secre Connection (SSL) checkbox. If sing a secre connection, the defalt port is If sing a non-secre connection, the defalt is Select the Do yo want to configre advanced settings to configre polling and collection threads settings. Click the pls (+) sign to add Hitachi Device Manager hosts. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for HP 3PAR StoreServ In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In Array Name, type the HP 3PAR StoreServ array. In Username and Password, type the reqired credentials. Select the Do yo want to configre advanced settings to configre polling and collection threads settings. Click the pls (+) sign to add more arrays. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for HP EVA In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Configration dring SoltionPack installation 77

78 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In HP EVA specific configration, select the host information and access credentials to commnicate with the HP EVA Element Manager host. Select Use advanced settings to configre polling settings. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for HP StorageWorks P9000 In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In HP StorageWorks P9000, type the HP StorageWorks server host. In Username and Password, type the reqired credentials. Optionally, select the Enable Secre Connection (SSL) checkbox. If sing a secre connection, the defalt port is If sing a non-secre connection, the defalt is Select the Do yo want to configre advanced settings to configre polling and collection threads settings. Click the pls (+) sign to add HP StorageWorks hosts. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for IBM LPAR In the Select the Components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter, if desired. 78 EMC Storage Resorce Management Site Installation and Configration Gide

79 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In Hostname or IP Address to send data, type the Primary Backend Host. The defalt port is In the ibm-lpar configration window: In HMC Hostname/IP, provide the hostname of the Hardware management console. In Username, enter the sername of the HMC. In Password, enter the password of the HMC. In Advanced Setting, the polling interval of HMC is 3600 seconds by defalt. Yo can redefine the polling interval. Note The SoltionPack for SoltionPack for IBM LPAR depends on the reports and scripts of Physical Hosts SoltionPack. SoltionPack for IBM DS In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In IBM DS Model, select the appropriate model. Type the IBM DS host information and access credentials to commnicate with the IBM CIM/SMI-S provider on a management server. If sing a secre connection, the defalt port is If sing a non-secre connection, the defalt is Select Use advanced settings to configre polling settings. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for IBM XIV In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Configration dring SoltionPack installation 79

80 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is Type the host information and access credentials to commnicate with the IBM XIV. If sing a secre connection, the defalt port is If sing a non-secre connection, the defalt is Click the pls (+) sign to add more arrays. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for Microsoft Hyper-V In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is Type the host information and access credentials to commnicate with the Hyper-V. Click the pls (+) sign to add more Hyper-V hosts. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for NetApp Filer In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is EMC Storage Resorce Management Site Installation and Configration Gide

81 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In NetApp Filer Mode, leave the defalt, 7-Mode or select C- Mode. Type the NetApp Filer host information and access credentials to commnicate with the NetApp Filer CLI. In Hostname, provide the NetApp hostname. In IP address, provide the IP address of NetApp Filer (7- Mode) or Clster Management IP (C-Mode), depending on the mode selected. In Port nmber, provide SSH port (defalt is 22). In Username, provide the sername of NetApp. In Password, provide the password of NetApp. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for Oracle Database In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In Choose configration mode, select Simple, RAC Instance, or Advanced. In Database port, type the port nmber. The defalt is In Database service name, type the database SID. Type the access credentials to commnicate with the Oracle database. Click the pls (+) sign to add more Oracle databases. Optionally select the Enable property import for server enrichment checkbox. In the Backend configration section, type the host information and credentials for the Primary Backend Host. Configration dring SoltionPack installation 81

82 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - Select Configre collector advanced settings to configre polling settings. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for Physical Hosts In the Select the components to install window: In generic-host-alertconsolidation, select the Primary Backend host. In Pre-configred alerts, select the Primary Backend host. In Reports, select the Frontend host. In Scripts, select the Collector host. In the Pre-configred alerts window: In Alerting Web-Service Instance, select the Primary Backend host. Select Enable the Host PowerPath Alerts if desired. In Recipient for alerts, provide an address. In the Reports window: In Administration Web-Service Instance, select the Frontend host. In the Scripts window: Select Collect performance metrics if desired. Select Collect performance metrics for PowerPath LUNs if desired. Select Use advanced settings to configre polling settings. SoltionPack for Storage Compliance Note the following: If yo are installing the on a Windows host, stop the process jcheck.exe. This is a Java JRE pdate validator and ses the same port as the SoltionPack. Do not install mltiple instances of the Storage Compliance Backend, as the same port wold be sed for each installation. This will lead to service startp failre. Alerting backend service shold be available dring installation; otherwise alerting definition will not be created. The SoltionPack for Storage Compliance creates alerting definition for notifying mentioned sers with alerts for breaches/violations. Thogh the Compliance service comes p immediately, do not rn ESM rles as the SoltionPack installation also poplates the database with ESM data, for ESM rle validation, which takes 82 EMC Storage Resorce Management Site Installation and Configration Gide

83 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - some time to get the database poplated (approximately mintes). In the Select the components to install window: In Compliance Notifications, select the Primary Backend host. In Compliance Backend, select the Primary Backend host. In Compliance Reports, select the Frontend host. In the Compliance Notifications window: In Alerting Web-Service Instance, select the Primary Backend host. In the Compliance Backend window: In the APG WebService (WS) Details section, select the Frontend host and provide the port nmber (defalt 58080) and credentials to access the Frontend Web portal. In the Breach Notification Details section, select the Primary Backend host. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for VI VirtalWisdom In the Select the components to install window: In Data Collection, select the Collector host. In Reports, select the Frontend host. In the Data Collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. the defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In VirtalWisdom Server Name, type the VirtalWisdom Portal Server host. In VirtalWisdom Server Port, type the port for the webservices proxy. The defalt is The vale is configred in the virtalwisdom.properties file in the VirtalWisdom installation directory on the VirtalWisdom Portal Server. In VirtalWisdom Username and Password, type the credentials sed for athentication with the proxy. Select Enable advanced settings to configre polling and collection threads settings. Configration dring SoltionPack installation 83

84 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for VMware vcenter In the Select the components to install window: In Alert Consolidation, select the Primary Backend host. In Pre-configred alerts, select the Primary Backend host. In Data Collection, select the Collector host. In Events, select the Primary Backend Host. In Reports, select the Frontend host. In Scripts, select the Collector host. In the Pre-configred alerts window: In Alerting Web-Service Instance, select the Primary Backend host. Select Enable the Host PowerPath Alerts if desired. In Recipient for alerts, provide an address. In the Data collection window: Select Activate the APG Failover-Filter if desired. In Hostname or IP address to send data, type the Primary Backend host. The defalt port is Leave Enable alerting on data collected checked. In Alerting Backend the hostname or IP address, select the Primary Backend host. The defalt port is In Topology Service hostname or IP address, type the Primary Backend host. In Please select the Gateway, select the Primary Backend host and gateway port: primary_backend: If this gateway is not inclded in the selected list, click Add new gateway to create a new gateway with this setting. In VMWare vcenter Hostname or IP address, type the vcenter service host and the Username and Password sed to poll vcenter. Select Do yo want to configre advanced settings to configre polling and collection thread settings, a backend data grop, and a re-synch interval. Click the pls (+) sign to add more hosts. In the Events window: Type the database information for the events database rnning on the Primary Backend Host. 84 EMC Storage Resorce Management Site Installation and Configration Gide

85 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - The defalt Database port is In VMWare vcenter Hostname or IP address, type the vcenter service host and the Username and Password sed to poll vcenter. Click the pls (+) sign to add more hosts. In the Reports window: In Administration Web-Service Instance, select the Frontend host. SoltionPack for XtremIO In the Select the components to install window: In Data Collection, select Data collection for XtreamIO. Recommended to be installed the host where collector is rnning. In Reports, select EMC XtremIO Reports. Recommended to be installed on frontend host where tomcat is rnning. In the Data Collection window: Failover-Filter mst be enabled, which is the defalt. HostName or the IP address to send data to mst point to the host where the collector is installed (localhost in a one-vm deployment and collector host in a for-vm deployment). Network port to send data to mst be set to the port to which the collected data will sent. Specify yor Arbiter port or legacy Backend data port. If yo have chosen a port other than 2020 for Arbiter, then the same port has to be configred in this field. The defalt port of 2020 is recommended. Enable alerting on data collected mst be checked, which is the defalt. Alerting Backend hostname or IP address mst point to the host where the collector is installed (localhost in a one-vm deployment and collector host in a for-vm deployment). Select the Primary Backend host. The defalt port is 2020 Alerting Backend data port mst be set to the port on which alerts will be collected by the Primary Backend Host is the defalt vale. In the section XtremIO configration, enter the IP and credentials of the XtremIO array s Management IP address or hostname. If the polling interval mst be decreased, se Select Advanced Settings and enter a vale between 900 (15 mintes) and 3600 (1 hor). In Management IP address or hostname, type the management host. Configration dring SoltionPack installation 85

86 SoltionPack Installation Table 2 SoltionPack configration details (contined) SoltionPack Configration Details - - In Please select the credentials, select Add new credentials. Type credentials for the management host. Post-installation configration of SoltionPacks This topic describes any reqired or sggested configration for each Storage Resorce Management Site SoltionPack after installation. SoltionPack Configration Details SoltionPack Configration Details - - SoltionPack for Brocade Yo do not need to perform any additional configration. FC Switch SoltionPack for Cisco MDS/Nexs SoltionPack for Cisco UCS SoltionPack for Converged Infrastrctre SoltionPack for EMC Atmos SoltionPack for EMC Centera SoltionPack for EMC Data Domain SoltionPack for EMC Data Protection Advisor SoltionPack for EMC Isilon SoltionPack for EMC ViPR SoltionPack for EMC VMAX Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. To establish polling of the Isilon arrays, yo need to add the arrays to an SNMP Collector sing the Device Discovery page in the Frontend ser interface. To add agents (SNMP devices) to yor installation, navigate to Yo do not need to perform any additional configration. Refer to Configring Soltions Enabler client access for VMAX on page 89 for detailed procedres for configring a secre host and serbased athorization soltion. After installing or pdating a SoltionPack, new data will not be available for three polling cycles. The data is available to the UI every hor with the Property Store task. This task can be rn earlier, if desired, by selecting the Property Store task fond on the Frontend host. 86 EMC Storage Resorce Management Site Installation and Configration Gide

87 SoltionPack Installation SoltionPack Configration Details - - SoltionPack for EMC To enable events reporting, edit yor Web-Application configration VNX file (APG.xml), by ncommenting the emc-vnx section (ncomment the ResorceLink tag). Yo will then need to restart the Tomcat service in order to make the change effective. The Tomcat Catalina APG.xml file is located in: /APG/Web- Servers/Tomcat/Defalt/conf/Catalina/localhost After installing or pdating a SoltionPack, new data will not be available for three polling cycles. The data is available to the UI every hor with the Property Store task. This task can be rn earlier, if desired, by selecting the Property Store task fond on the Frontend host. SoltionPack for EMC VPLEX SoltionPack for EMC Watch4net Health SoltionPack for Hitachi Device Manager SoltionPack for HP 3PAR StoreServ SoltionPack for HP EVA SoltionPack for HP P9500 SoltionPack for IBM DS SoltionPack for IBM LPAR SoltionPack for IBM XIV SoltionPack for Microsoft Hyper-V SoltionPack for NetApp Filer SoltionPack for Oracle Database Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Depending on the nmbers of Storage elements managed, yo may need to edit the nix-services.properties file to increase the Heap Memory to a sitable level. The file is located at: /APG/ Collecting/Collector-Manager/yor_instance/conf/ nix-services.properties Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. After the Collector-Manager has been rnning for 30 seconds or more, review the Collecting-0.0.log file to determine if any operational isses exist. To access the log file: 1. Expand the Log Files section of the Collector-Manager. 2. Open the collecting-0.0.log. 3. Verify that the Collector-Manager started withot Severe errors. To verify, look for conditions marked as Severe and trobleshoot the indicated problem. Note the following: Post-installation configration of SoltionPacks 87

88 SoltionPack Installation SoltionPack Configration Details - - Yo may see a severe error: Failed to load properties for name [/cache.ccf]. This error is a normal condition that occrs at start-p time and can be ignored. Look for the collect done line, which confirms that data is being collected: 'Oracle-Perf' collect done: 549 new raw vales collected in 3 seconds 537 ms sing 25 SQL qeries SoltionPack for Physical Hosts SoltionPack for EMC Host Interface SoltionPack for EMC RecoverPoint SoltionPack for Storage Compliance Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. Yo do not need to perform any additional configration. After installing the SoltionPack yo have to restart the following services: To restart the tomcat service: 1. Go to /OPT/APG/bin 2. Rn the command./manage-modles.sh service restart tomcat instance-name To restart the backend service: 1. Navigate to Administration > Centralized Management > Physical View and select the host on which the backend is installed. 2. Select backend. The backend service details view appears. 3. Click Restart. If yo reset the web service password, then yo have to reconfigre the Storage Compliance SoltionPack as follows: 1. Navigate to Administration > Centralized Management > SoltionPacks > Storage Compliance. 2. Click to reconfigre the Compliance Backend SoltionPackBlock instance. 3. Type the new password in the web service details section. 4. Click Reconfigre. 5. Restart the tomcat service. SoltionPack for VI VirtalWisdom SoltionPack for VMware vcenter Yo do not need to perform any additional configration. To enable PowerPath LUN or Path performance data collection on Linx, navigate to APG/Collecting /Remote-Shell- Collector/<Instance Name>/scripts directory 1. Edit LnMappingDetection.pl script. 88 EMC Storage Resorce Management Site Installation and Configration Gide

89 SoltionPack Installation SoltionPack Configration Details Set want_powerpath_ln_performance=1 Note By defalt, the want_powerpath_ln_performance flag is set to 0 To enable PowerPath LUN or Path performance data collection on Windows, navigate to C:\Program Files\APG\Collecting \Remote-Shell-Collector\<Instance Name> \scripts\windows directory. 1. Edit LnMappingDetection.ps1 script. 2. Set powerpathperformancecollection=enabled. Note By defalt, the powerpathperformancecollection flag is set to disabled. To enable events reporting, 1. Edit yor Web-Application configration file (APG.xml), by ncommenting the vmware-vcenter section (ncomment the ResorceLink tag). 2. Restart the Tomcat service in order to make the change effective. SoltionPack for XtremIO Yo do not need to perform any additional configration. Docmentation Resorces For SoltionPacks which have no additional configration reqired, yo can refer to the EMC Storage Resorce Management Site User and Administration Gide and online help for information on sing SoltionPacks. Post-installation configration details This topic provides detailed post-installation configration information for a specific SoltionPacks. In some cases yo may need to perform more extensive configration tasks related to a SoltionPack that cannot be effectively covered in the checklist provided in Postinstallation configration of SoltionPacks on page 86. Configring Soltions Enabler client access for VMAX Symmetrix Athorization sing symath provides a secre host and ser-based athorization soltion. Use this procedre in environments in which Symmetrix Athorization is enabled. Before yo begin Ensre that yo have configred an appropriate Soltions Enabler scenario as described in Preparing EMC VMAX on page 50 For more detailed information abot Soltions Enabler, refer to the following docments: Post-installation configration details 89

90 SoltionPack Installation Configring host access EMC Soltions Enabler Symmetrix Array Management Prodct Gide EMC Soltions Enabler Symmetrix Secrity Configration Gide The following configration procedres are specific to a Soltions Enabler proxy configration. However, yo can also se these procedres for a local Soltions Enabler configration in which the SRM Site Collector software is installed directly on the existing SYMAPI Soltions Enabler server. The term "client" refers to the host where the Collector software has been installed. Procedre 1. Validate if Symmetrix Athorization is enabled by rnning the symath list command on the host that has direct FC connectivity to the arrays to be managed. 2. Check the stats displayed in the the Athorization Control section to determine the reqired action: Option Description Disabled Symmetrix Athorization is not configred. Enabled Symmetrix Athorization is configred. In this case, yo mst configre the apg ser and SRM Site hosts that will be issing commands. Contine to step If Symmetrix Athorization is enabled, se the following procedres to complete the configration: a. Configring host access on page 90 b. Adding client hosts to existing SYMAUTH configration on page 91 c. Enabling client athorization on page 91 d. Validating Symmetrix access controls on page 92 Enable the SRM Site apg accont to access the local Soltions Enabler resorces and logs. This procedre provides an example of configring access on a host sing the Linx operating system. Procedre 1. Log in to the Soltions Enabler client host. 2. Navigate to /var/symapi 3. Grant the apg ser write access to the following Soltions Enabler directories and contents: a. chown -R apg <SYMAPI_HOME>/config b. chown -R apg <SYMAPI_HOME>/db 4. Repeat steps 1-3 for each VMAX Collector server. 5. Grant the apg ser athorization for the Soltions Enabler storapid daemon by navigating to <SYMAPI_HOME>/config/daemon_sers and adding the following line to the storapid[base Daemon] section of the file: apg storapid <all> 90 EMC Storage Resorce Management Site Installation and Configration Gide

91 SoltionPack Installation 6. Save and exit the daemon_sers file. 7. Set a password for the apg ser. 8. Repeat steps 5-7 for each VMAX collector server. 9. Log ot and log in as the apg ser and rn symath show -sername to determine the flly-qalified accont name. 10.Make note of the vale displayed in yor crrent sername. For example: H:system_name\apg 11.Repeat steps 9-11 for each VMAX Collector server. Adding client hosts to existing SYMAUTH configration Enabling client athorization Enable the apg ser with read-only monitoring access for VMAX arrays sing Soltions Enabler User Athorization. Before yo begin Complete the procedre described in Configring host access on page 90. Yo mst be logged in as Root or Administrator. Perform the following procedre for each VMAX yo want to enable SRM Site to access. Procedre 1. Rn the symath -sid <SID> list command to determine if User Athorization Control is enabled on the local client system. If User Athorization Control is disabled (Disabled) for the specific VMAX, proceed to Enabling client athorization on page 91. If User Athorization Control is enabled (Enabled) and in se (Enforced) for the specific VMAX, contine with this procedre. 2. Ensre that yo are logged in with an existing privileged accont (e.g., root or administrator). 3. Use the find / -name ath.txt command to find the ath.txt file. 4. Navigate to the folder with the ath.txt file. 5. Edit the file to inclde a line based on the reslts obtained from performing the procedre described in Configring host access on page 90. For example: assign ser H:system_name\apg to role Admin; 6. Save the file. 7. Use the symath -sid <SID> -f ath.txt command to commit changes to the User Athorization User-to-Role map. 8. Repeat this procedre for each VMAX array. Use this procedre when User Athorization Control is disabled (Disabled) for the specific VMAX and yo want to restrict the apg ser to a monitoring role withot limiting other acconts in the environment. Before yo begin Yo determined that User Athorization Control is disabled by performing the task described in Adding client hosts to existing SYMAUTH configration on page 91. Yo are logged in to the client host with local root or administrator credentials. Configring Soltions Enabler client access for VMAX 91

92 SoltionPack Installation Procedre 1. Create an ath.txt file with the following contents: assign ser * to role Admin; set enforcement enforce; assign ser H:system_name\apg to role Admin; 2. Repeat step 1 for each VMAX Collector server. 3. Use the symath -sid <SID> -f ath.txt command to commit changes to the User Athorization User-to-Role map. 4. Repeat step 3 for each VMAX array. 5. Use the symath -sid <SID> enable command to enable User Athorization Control for a specific VMAX array. 6. Repeat step 5 for each VMAX array. 7. Use the symath list command to validate that User Athorization Control is enabled and enforced. S Y M M E T R I X A U T H O R I Z A T I O N S T A T U S Symmetrix ID: Athorization Control : Enabled Time Enabled : Mon Ag 5 12:51: Time Disabled : Th Ag 1 15:54: Time Updated : Mon Ag 5 12:51: Enforcement Mode Server Policy : Enforce : Trst clients Validating Symmetrix access controls Validate that the Symmetrix Access Control (SymACL) secrity featre is enabled and in se on VMAX systems. Before yo begin Yo are logged in to the client host with local root or administrator credentials. Procedre 1. Rn the symacl list command for each VMAX array. Stats information is displayed. S Y M M E T R I X A C C E S S C O N T R O L S T A T U S Symmetrix ID: Access Session Control Locked Time Last Updated N/A N/A N/A Symmetrix ID: Access Session Control Locked Time Last Updated N/A N/A N/A If the Access Control field indicates N/A, SymACL is not enabled on this VMAX system. 92 EMC Storage Resorce Management Site Installation and Configration Gide

93 SoltionPack Installation Limitation: some alerts not displayed If the Access Control field indicates Enabled, contine this procedre to secre SRM Site client systems from a host system in the existing SymACL AdminGrp for each VMAX system. 2. Create a SymACL access grop appropriate to contain the SRM Site client systems (e.g., SRMGRP) 3. Add each client system's niqe identifier to the access grop. 4. Repeat for each SRM Site client host system. 5. Grant BASE access rights to the access grop jst created for all devices (ALL_DEVS). 6. Repeat this procedre for each VMAX system monitored by SRM Site. Storage Resorce Management Sitefails to receive and display some alerts If a trap is lost in the network commnication, Soltions Enabler is not aware of the host and is not able to resend the lost information. Enabling passive host discovery throgh Brocade FC SoltionPack Yo have to enable passive host discovery when yo want to see end to end topology from hosts to array and identify chargeback on SAN enabled hosts, withot active host discovery. Yo can passively resolve hosts, discovered throgh the SoltionPack for Brocade FC Switch, from zoning records. The zone naming patterns spported in SRM Site are: z_%h% z_%h%_* z_%h%_*_* %h%_* If yo want to add a new host zone naming pattern, then yo have to add the corresponding reglar expression to the configration file vhf-mds-zone-dns.xml located in /opt/apg/collecting/variable-handling-filter/brocadefc-switch/conf directory. Procedre 1. Click Administration. 2. Click Centralized Management. 3. Click SoltionPacks. 4. Click Brocade FC Switch SoltionPack. 5. Click to reconfigre the SMI Data Collection SoltionPackBlock instance. 6. Select Enable Passive Host Discovery checkbox. 7. Click Reconfigre. Enabling passive host discovery throgh Brocade FC SoltionPack 93

94 SoltionPack Installation Enabling passive host discovery throgh Generic-SNMP Yo have to enable passive host discovery when yo want to see end to end topology from hosts to array and identify chargeback on SAN enabled hosts, withot active host discovery. Yo need to reconfigre Generic-SNMP independent soltion pack to enable passive host discovery throgh the SoltionPack for Cisco MDS/Nexs. The zone naming patterns spported in SRM Site are: z_%h% z_%h%_* z_%h%_*_* %h%_* If yo want to add or modify the existing zone naming patterns: Procedre 1. Add or modify the regex patterns in the following VFH xml files: SoltionPack for Brocade FC: SoltionPack for CISCO MDS/Nexs: /opt/apg/collecting/variable-handling-filter/ brocade-fc-switch-sp-instance-name/conf/vhf-mdszone-dns.xml /opt/apg/collecting/variable-handling-filter/ Generic-SNMP-block-instance-name/conf/vhf-mdszone-dns.xml How to add or modify zone naming patterns 2. After modifying these xml files, restart either of the following: collection-manager service of SoltionPack for Brocade FC collection-manager service of Generic SNMP instance in case of SoltionPack for CISCO MDS/Nexs Edit regex patterns in VFX XML files. The regex patterns in the xml file is based on Java's reglar expression format. The following section of XML code needs to be added or modified for spporting new zone name patterns: <regex-property name="zname" keep="tre"> <!-- <regex>(.*)</regex>--> <!-- spporting hostname format (z_%h) --> <regex>^(z_) ([A-Z0-9a-z]+)$</regex> <!-- zone member name pattern --> <part name=hostname" vale="${1}" /> <!-- hostname position in the pattern --> <part name=createdby" vale="system" /> <part name=devtype" vale="passivehost" /> </regex-property> The following examples explain how to read and interpret these patterns in simple terms: Regex is ^(z_)([a-z0-9a-z]+)$ and hostname position is 2 Matches all the zone names that start with 'z_' and extracts the hostname from that matches the rest of the string that follows 'z_' 94 EMC Storage Resorce Management Site Installation and Configration Gide

95 SoltionPack Installation Example: For zone name z_lingz099, the hostname extracted is lingz099. Regex is ^([^z_][a-z0-9a-z] +)_([A-Za-z0-9]+) and hostname position is 1 Matches all the zone names that doesn't start with 'z_' and extracts the hostname from zone name that is before the first nderscore. Example: For lgloe111_1106, the hostname extracted is lgloe111. For more information on writing Java's reglar expression refer to docs.oracle.com/javase/ttorial/essential/regex/ Post-install configration for SoltionPack for Physical Hosts In order to discover hosts and collect data yo have to perform the following configration on the collector after installing the SoltionPack for Physical Hosts 1. Add hosts for discovery and data collection on page Configre remote shell collector on page 95 Adding hosts for discovery and data collection In order to discover hosts and collect data from the hosts yo have to add the hosts throgh the Discovery Center. Procedre 1. Click Administration. 2. Click Centralized Management > Discovery Center. 3. Click Host Configration. 4. Click Add new device Provide these details for the host: Option Server Instance Description Specify the server on which the host has to be discovered. Specify the instance Generic-RSC on which the host has to be discovered. Host name or IP address Type the host name or the IP address of the host. Specify the OS type Athentication type Type the operating system. Available vales are: AIX, HPUX, LINUX, Solaris, and Windows. Available vales: Password based: Type in the sername and password Pblic key based: Type in the sername and location of the private key. Cstom Port Provide the network port if yo enable this. Configring remote shell collector If yo have a scale-ot environment, yo have to configre the collectors so that data can be forwarded to Linx VMs which are receiving data into APG backend/topology Post-install configration for SoltionPack for Physical Hosts 95

96 SoltionPack Installation Service. These configration changes will enable yo to view topology maps and IO connectivity on a mltiple VM SRM Site instance. Yo do not reqire this configration for standalone Windows binary installer or if Windows host is discovered natively from Linx VM from vapp SRM Site instance. Before yo begin Yo have the SoltionPack for Physical Hosts installed. Procedre 1. Click Administration. 2. Click Centralized Management. 3. Click SoltionPacks. 4. Under Independent SoltionPack Blocks, click SoltionPackBlock instance. 5. Provide the following details nder Generic-RSC. to reconfigre the Generic-RSC Option Description - - Psh INQ Select this checkbox to psh inq on the target host. Hostname or IP address to send data to Alerting Backend hostname or IP address Topology Service hostname or IP address The hostname or IP address of the host to which the collected data is to be sent. The Alerting Backend hostname or IP address of the host where the data is to be sent, for alerting on real time data. The Topology Service hostname or IP address from where the data can be qeried from, for data collection and property tagging. 6. Click Reconfigre. Configring compliance-frontend.xml To enable storage compliance featres, yo have to edit the complaince-frontend.xml by replacing localhost with primary backend VM name in a mltiple VM environment. Also, if yo have installed mltiple databases, yo have to edit the xml file to connect these databases. Before yo begin SoltionPack for Storage Compliance mst be installed. Procedre 1. Log in to the host sing Ptty. 2. Change the directory path to /opt/apg/web-servers/tomcat/defalt/ conf/catalina/localhost/ and edit the compliance-frontend.xml file to make changes to localhost and replace it with the name of the primary backend VM (same location where compliance backend is installed) in the following three entries: <Resorce name="manager/compliancemanager" ath="container" type="com.emc.srm.base.compliance.jmx.compliancemanagerfactory" factory="org.apache.naming.factory.beanfactory" ser="admin" pass="changeme" rl="service:jmx:rmi:///jndi/rmi://localhost:52755/jmxrmi" /> 96 EMC Storage Resorce Management Site Installation and Configration Gide

97 SoltionPack Installation <Resorce name="manager/complianceesmmanager" ath="container" type="com.emc.srm.base.compliance.jmx.compliancemanagerfactory" factory="org.apache.naming.factory.beanfactory" ser="admin" pass="changeme" rl="service:jmx:rmi:///jndi/rmi://localhost:52755/jmxrmi" /> <Resorce name="manager/compliancepolicytemplatemanager" ath="container" type="com.emc.srm.base.compliance.jmx.compliancemanagerfactory" factory="org.apache.naming.factory.beanfactory" ser="admin" pass="changeme" rl="service:jmx:rmi:///jndi/rmi://localhost:52755/jmxrmi" /> 3. If yo have installed mltiple databases, yo have to edit the compliancefrontend.xml file located in the /opt/apg/web-servers/tomcat/ Defalt/conf/Catalina/localhost/ directory to connect all the databases. <!-- Gives access to the timeseries database. --> <ResorceLink name="jdbc/apg-db:{ cachegrp=db }" global="jdbc/apg- DB" type="javax.sql.datasorce"/> <ResorceLink name="jdbc/apg-db4:{ cachegrp=db }" global="jdbc/apg- DB4" type="javax.sql.datasorce"/> <ResorceLink name="jdbc/apg-db3:{ cachegrp=db }" global="jdbc/apg- DB3" type="javax.sql.datasorce"/> <ResorceLink name="jdbc/apg-db2:{ cachegrp=db }" global="jdbc/apg- DB2" type="javax.sql.datasorce"/> <ResorceLink name="jdbc/apg-db1:{ cachegrp=db }" global="jdbc/apg- DB1" type="javax.sql.datasorce"/> Policy Management Yo can se defalt policies or create ser-defined policies to analyze configration changes in yor data center for compliance and to detect breaches against these policies. Creating a policy on page 26 Enabling or Disabling a policy on page 28 Editing a policy Copying a policy Deleting a policy Creating a policy Use the existing pre-defined templates to create a new policy or the empty policy template to cstomize it. Procedre 1. Click Operations. 2. Under Compliance, click Storage Compliance > Manage Rles & Policies. 3. Click Create Policy. 4. Select a template from the Select Policy from template drop-down list. 5. Click Description and provide the following details: Field Policy Name Description Type a name for the policy. Policy Management 97

98 SoltionPack Installation Field Description Policy Description Type a brief description for the policy.- State Select Enabled or Disabled from the drop-down list if yo want the policy to rn once it is created or otherwise. Note If yo choose the state as Disabled, yo shold manally enable the policy after creating the policy to rn it. 6. Click Scope. a. To create a new ser-defined scope, click Create Scope. The Create Scope dialog box appears. b. Provide the following details: Field Name Description Type a name for the scope. Criteria Type a criteria for the scope in the following format: <Property Name> <Operator> <Vale>, sch as; devtype = 'Array' & devicetype = 'FabricSwtch' & parttype = 'port', and so on. Note Some examples of well-defined properties that can be sed in criteria are: For Switch: devtype = 'Objecttype', device = 'SwitchName'. For Fabric: parttype = 'Fabric/VSAN', part = 'FabricName'. For Array: serialnb = 'Array S/N', ip = 'IP Address', revision = 'Microcode'. For Host: domain = 'Domain Name', devdesc = 'Operating System Version', pmodel = 'HBA Model'. Note The Criteria allows the following operators: & (AND), I (OR), and= (Eqal To). Yo can also se wild card entry, sch as, % for starts with, ends with, and contains expressions. c. Click Show Members to validate the criteria. The Show Members dialog box listing members with matching criteria appears. A warning message is displayed for invalid criteria. d. Click Save. The new ser-defined scope is listed in the Scope table. 98 EMC Storage Resorce Management Site Installation and Configration Gide

99 SoltionPack Installation Note Click Show Members to view the list of members associated with the scope. 7. Click Rles. a. Click Create Rle. b. Select a rle name from the drop-down list. c. Doble-click a rle to enable or disable it in the corresponding State colmn of the rle. d. Doble-click a rle to set the Severity to Critical, Major, Minor, or Normal sing the drop-down list. e. To provide criteria vales for the rle, click Criteria For Selected Rle and select one of the following criteria and type a vale in the corresponding text box: Select the corresponding check box to enable the criteria or otherwise. Select LE in the drop-down list to represent the Less than or Eqal to vale for the criteria. Select EQ in the drop-down list to represent the Eqal to vale for the criteria. Select IN in the drop-down list to represent the vale(s) that the criteria contains. Note Yo can type mltiple vales that are comma separated. The vales can contain different patterns and need not be restricted only to strings. Enabling or Disabling a policy Note Rles validate objects when its vstats vale is active. The other objects are ignored. f. Click Recommendation to view the recommendation for the rle. 8. Click Schedle. a. Select a Schedle option and specify appropriate vales from the drop-down lists to rn the policy at a schedled time. 9. Click Save. If yo want the site to rn the policy after it is created, yo mst enable the policy. After enabling the policy, yo can stop it any time by disabling it. Procedre 1. Click Operations. 2. Under Compliance, click Storage Compliance > Manage Rles & Policies. 3. Right-click on a policy and select either: Enable - To enable the policy to rn. Disable - To disable the policy. Policy Management 99

100

101 CHAPTER 7 Site Software Uninstallation This chapter incldes the following topics: Overview Stopping core software services on a UNIX server Uninstalling core software from a UNIX server Stopping core software services on a Windows server Uninstalling core software from a Windows server Uninstalling a SoltionPack Site Software Uninstallation 101

102 Site Software Uninstallation Overview Yo can ninstall a SoltionPack and ninstall core software from a UNIX or Windows server. Stop the core software services before ninstalling core software. Stopping core software services on a UNIX server Use the manage-modles.sh service stop command to stop a specific core software service or to stop all core software services on a UNIX server. Before yo begin Make sre yo have logged in with root or APG privileges. Procedre Type manage-modles.sh service stop <service_name> from the bin directory of the installation to stop a specific core software service. This example shows how to stop all core software services:./manage-modles.sh service stop all Uninstalling core software from a UNIX server Use the manage-modles.sh service remove all command to ninstall all core software services. Before yo begin Make sre yo have a login with root privileges. Procedre 1. Type manage-modles.sh service remove all from the /opt/apg/bin directory to ninstall all core software services. 2. Type rm -rf /opt/apg to remove the installation directory. Stopping core software services on a Windows server Use this procedre to stop core software services from the Windows desktop. Before yo begin Make sre yo have logged in with system administrator credentials to manage services. Procedre 1. From the application desktop, select Start > Administrative Tools > Services. 2. Right-click each service and click Stop, in order: APG MySQL APG Backend APG Alerting Backend 102 EMC Storage Resorce Management Site Installation and Configration Gide

103 Site Software Uninstallation APG Collector Manager APG Tomcat APG Task Schedler APG Webservice Gateway Uninstalling core software from a Windows server Use the manage-modles.cmd service remove all command to remove all core software services from a Windows server. Before yo begin Make sre yo have logged in with system administrator credentials. Procedre 1. Type manage-modles.cmd service remove all from the C:\Program Files \APG\bin folder to ninstall all core software services. 2. Use the Windows Control Panel to ninstall core software. a. Click Start > Control Panel > Programs. b. Click Uninstall a program. Uninstalling a SoltionPack c. Select the Watch4net Soltions APG and click Uninstall. If yo no longer want to view the reports of a certain SoltionPack, yo can ninstall that SoltionPack from the server. Procedre 1. Log in with administrator credentials for core software and select Administration. 2. Select Centralized Management in the Administration tree. 3. Select SoltionPacks in the tree. 4. Select the SoltionPack that yo want to ninstall in the Installed SoltionPacks screen. 5. In the Properties area, click Trashcan icon for each instance of the SoltionPackBlock and click Remove. Uninstalling core software from a Windows server 103

104