Table of Contents FINAL PROGRAM 3

Transcription

1 FINAL PROGRAM 1

2

3 Table of Contents Welcome to Seoul 4 Sponsors 6 Welcome to ASME 2016 Turbo Expo 7 Grand Opening 8 IGTI Board & Conference Committee 9 Networking Events 10 Women s Networking Event 11 Turbo Expo Local Liaison Committee 13 Supporting Publications 13 Participating Organizations 13 Featured Lectures 13 GT India Student News 16 Student Poster Sessions COEX Convention Center Floorplans 20 Session Participant Information 23 Exhibit Hall Presentation Stage Schedule 24 Exhibit Advisory Committee 25 Exhibitor Social Media 27 Exhibit Booth Listings 28 Exhibit Product Categories Exhibit Booth People's Choice 31 Award Winners 32 Committee Chairs & Vice Chairs 34 Committee Meeting Schedule 35 Committee Point Contacts Registration Information 38 Joint Sessions 40 Tutorials of Basics & User Sessions 41 Facility Tours 42 Session Schedule 43 Technical Conference Author Index Schedule at a Glance Back Cover FINAL PROGRAM 3

4 WELCOME TO SEOUL, SOUTH KOREA Driven by the latest cutting-edge technologies and trends, Seoul is one of the most fast-paced high-tech cities in the world. As progressive as Koreans are, many still retain traditional and Confucian values. Korean culture and customs are deeply rooted in family values with, respect and obedience towards seniors, including parents, teachers, older siblings, senior co-workers, and generally anyone of older age. Seniors in return have more responsibilities and obligations towards their juniors. Koreans also value family more importantly above anything else. Status and dignity is crucial as every action of an individual reflects back on their family, company, and country. While most Koreans will understand that foreigners who commit minor social faux pas do not mean disrespect, following basic Korean etiquettes will be warmly received. Take your shoes off at the door when entering any residence, temple, or guesthouse. A short bow essentially a nod is the most respectful greeting. Give and receive any object using both hands.

5 Gyeongbokgung Palace

6 PLATINUM WOMEN IN TURBOMACHINERY EVENT GOLD SILVER STUDENT MIXER BRONZE ATTENDEE BAGS ADDITIONAL SPONSORS TURBOCAM I N T E R N A T I O N A L 6 ASME 2016 TURBO EXPO

7 Welcome to ASME 2016 Turbo Expo We hope you will enjoy your visit to Seoul! Please join us at the Grand Opening Session on Monday morning which includes the Turbo Expo Keynote Panel and ASME IGTI Awards Ceremony. This year s keynote theme is Energy and Propulsion in the Information Age. Along with being a first in Asia, Turbo Expo - held this year in Seoul, South Korea - will have another first in changing the format of the keynote from a lecture session to a panel session. Moderators will field questions from the audience and have the panelists answer. Offering their expert perspectives will be keynote panelists Eric Gebhardt, Chief Platforms & Operations Officer, Current powered by GE; Daniela Gentile, CEO, Ansaldo Sviluppo Energia A.S.EN; Thomas W. Prete, Vice President, Engineering, Pratt & Whitney. Moderators will be, myself, Tim Lieuwen, Professor, Georgia Institute of Technology and William A. Newsom, Executive Vice President, New Generation Systems, Mitsubishi Hitachi Power Systems Americas. Two plenary sessions will follow the same format on Tuesday and Wednesday morning (see page 8 for more information). The awards ceremony will honor the winners of the ASME R. Tom Sawyer Award, the ASME Gas Turbine Award, the ASME IGTI Industrial Gas Turbine Technology and Aircraft Engine Technology Awards, the John P. Davis Award, and the Early Career Engineer Award in memory of the late Dilip R. Ballal. As one of an estimated 3,000 participants, you will have a choice of over 1,000 technical papers to be presented in over 300 technical sessions. The exposition will showcase the newest products from over 80 companies, offering opportunities for practitioners and researchers to come together. There will also be Workshops, Panel Sessions and Tutorials. All attendees are invited to the Welcome Reception on Monday evening. The Women s Networking Event is on Tuesday evening and students and young engineers should not miss the mixer on Wednesday evening. On behalf of ASME IGTI, I wish to thank our sponsors who have ensured the success of Turbo Expo 2016 through their generous support. I also wish to thank our Executive Conference Chair, William A. Newsom, the keynote and plenary panelists, our Local Liaison Committee Chair, Seung Jin Song; this year s Review Chair, Jaroslaw Szwedowicz and the Vice Review Chairs, Ray Chupp, Zolti Spakovszky, and Mark Turner and our Technical Program Chair, John Chew. Special thanks to all of the volunteers who contributed so much to make Turbo Expo the premier conference for turbomachinery technology. Turbo Expo would not be possible without the tireless efforts of the authors, reviewers, session organizers, point contacts, vanguard chairs, committee leaders, and others. Thank you for attending Turbo Expo. I hope that you find your time in Seoul to be an enriching and memorable experience. Conference Chair Tim Lieuwen Georgia Institute of Technology Welcome to Seoul! Seoul, Korea s largest city, was founded more than 2,000 years ago by Baekje, one of Korea s three kingdoms. Situated on the Hans River, Seoul has a population of 10,349,312. It is the 14th largest city in the world and second largest metropolitan area. It is also home to Korean turbomachine manufacturers Doosan Heavy Industries making steam turbines & gas turbines and Hanwha Techwin producing energy equipment & aviation gas turbine components. In addition, many of the world s largest engineering and construction companies as well as regional headquarters of multinational companies such as Siemens Energy Solutions are based in Seoul. Such concentration of users, researchers, and manufacturers offers an exceptional environment for Turbo Expo. Seoul is a popular tourist destination with many areas of interest. The Gangnam area is where the stylish set of Seoul come together, thanks to a wide range of trendy items and luxurious shopping spots. People who want to experience the chic and stylish side of Seoul must be sure to visit the Gangnam area. The Dongdaemun area holds Korea s number one treasure, the Heunginjimun Gate, which was built to defend Seoul. Its exquisite and splendid appearance attract thousands of people s attention. The City Hall area - the 600-year Capital phrase represents the pride of Seoul. Five historic palaces from the Joseon Dynasty, including Changdeokgung Palace, a UNESCO World Heritage site, old Hanok villages, the Korea House and Samcheonggak are excellent places to visit in this area. The Yongsan district is characterized by its unique cultural mixture of not only an American style, but also by European and Middle Eastern influences. Gangdong area is where Seoulites relax with a walk through the beautifully verdant and picturesque Seoul Forest Park or by taking in fabulous views of the Hangang River and the many surrounding lakes. COEX Mall, located in our conference venue, is the world s largest underground shopping mall. I am sure you will have a fantastic time visiting some of these popular areas! I wish you all a pleasant, productive, and rewarding visit to the Republic of Korea. Executive Conference Chair Bill Newsom Mitsubishi Hitachi Power Systems Americas, Inc. Free wi-fi access is provided to ASME Turbo Expo attendees throughout the COEX. FINAL PROGRAM 7

8 GRAND OPENING Energy and Propulsion in the Information Age Turbo Expo Keynote & ASME IGTI Annual Awards Monday, June 13, :15 a.m. 12:15 p.m. Grand Ballroom, 1st Floor North Side, COEX Center Along with being a first in Asia, Turbo Expo - held this year in Seoul, South Korea - will have another first in changing the format of the keynote from a lecture session to a panel session. Moderators will field questions from the audience and have the panelists answer. We have some exceptional high profile industry experts lined up to be the moderators and panelists. Bringing their expertise and experience, they will make this a worthwhile part of the conference. Join thousands of turbomachinery professionals at the year s most commanding gathering of business leaders, technology contributors, and authorities in the field of turbomachinery. It is an ideal occasion to gather essential marketplace insights, learn about pivotal achievements, and connect with colleagues from around the world. The Keynote theme is Energy and Propulsion in the Information Age. The keynote session will explore those innovations and how they are impacting rotating machinery in the power generation, aircraft, and oil and gas industries, including manufacturing and fleet monitoring and maintenance. Panelists Eric Gebhardt, Chief Platforms & Operations Officer, Current powered by GE Daniela Gentile, CEO, Ansaldo Sviluppo Energia A.S.EN Thomas W. Prete, Vice President, Engineering, Pratt & Whitney Moderators Tim Lieuwen, Professor, Georgia Institute of Technology William A. Newsom, Executive Vice President, New Generation Systems, Mitsubishi Hitachi Power Systems Americas The keynote is followed by the ASME IGTI annual awards program which honors individuals, your peers, who have made significant contributions to the advancement of turbine technology and the industry. Plenaries Two plenary sessions will follow the keynote format on the following days: Asset Optimization and Monitoring in the Information Age Tuesday, June 14, 2016 Grand Ballroom, First Floor North Side, COEX Center 8:00 8:45 a.m. Significant growth in sensor technology, models, and data analytics is revolutionizing our capabilities to optimize the performance and proactively manage and monitor the health of gas turbines. Many OEM s, utilities, and operators now have large, networked monitoring centers for optimizing the health of specific engines or fleets of engines. Moreover, new challenges and questions around data ownership, privacy, and cybersecurity are emerging, which could severely constrain these prospects. This plenary session will explore these opportunities and threats and discuss future outlooks for asset monitoring. Panelists Dr. Eisaku Ito, General Manager, Mitsubishi Heavy Industries R&D Maria Sferruzza, Turbomachinery Contractual and Maintenance Services GM, GE Italy Paul Stein, Director, Research & Technology, Rolls-Royce plc 8 ASME 2016 TURBO EXPO

9 Moderators James R. Maughan, Technical Director, Aero-Thermal and Mechanical Systems, GE Global Research Dr. Klaus Brun, Machinery Program Director, Southwest Research Institute Gas Turbine Manufacturing in the Energy Age Wednesday, June 15, 2016 Auditorium, Third floor, COEX Center 8:00 8:45 a.m. The next industrial revolution in manufacturing is being forged at the intersection of physical and digital worlds. Next generation turbines will be engineered from cradle to grave in a virtual design space, enabling the design, manufacturing, and utilization of turbines to be optimized at an overall system level. This plenary session will explore that new industrial manufacturing renaissance and what s coming next. Panelists Vinod Philip, Chief Technology Officer, Siemens Power and Gas Akimasa Muyama, Executive Vice President & Head of Turbine Products, Mitsubishi Hitachi Power Systems Moderators Richard A. Dennis, Advanced Turbines Technology Manager, U.S. Department of Energy National Energy Technology Laboratory Karen A. Thole, Department Head of Mechanical and Nuclear Engineering, Professor of Mechanical Engineering, Pennsylvania State University ASME IGTI Board Chair Piero Colonna Delft University of Technology Past Chair Seung Jin Song Seoul National University Turbo Expo Committee Liaison Geoff Sheard AGS Consulting Member James Free NASA Glenn Research Center Member Hany Moustapha Pratt & Whitney Canada / AÉROÉTS, École de Technologie Supérieure Energy Conversion Segment Liaison Vinod Philip Siemens Power and Gas Member Al Volponi Pratt & Whitney ASME IGTI 2016 Turbo Expo Conference Committee Executive Conference Chair Bill Newsom Mitsubishi Hitachi Power Systems Americas, Inc. Conference Chair Tim Lieuwen Georgia Institute of Technology Technical Program Chair John Chew University of Surrey Review Chair Jaroslaw Szwedowicz GE Power Vice Review Chair Ray Chupp REC Consulting, LLC Vice Review Chair Zolti Spakovszky Massachusetts Institute of Technology Vice Review Chair Mark Turner University of Cincinnati Local Liaison Chair Seung Jin Song Seoul National University Exhibitor Representative Dave Pincince TURBOCAM International Board Liaison Geoff Sheard AGS Consulting LLC FINAL PROGRAM 9

10 NETWORKING EVENTS Grand Opening Energy and Propulsion in the Information Age Turbo Expo Keynote & ASME IGTI Annual Awards Monday, June 13, :15 a.m. 12:15 p.m. Grand Ballroom, 1st Floor North Side, COEX Center Early Career Engineer & Student Mixer Wednesday, June 15, :45 8:00 p.m. Auditorium Lobby, COEX Center Plenaries Asset Optimization and Monitoring in the Information Age Tuesday, June 14, 2016 Grand Ballroom, First Floor North Side, COEX Center 8:00 8:45 a.m. Gas Turbine Manufacturing in the Energy Age Wednesday, June 15, 2016 Auditorium, Third floor, COEX Center 8:00 8:45 a.m. Welcome Reception Monday, June 13, 2016 Harmony Ballroom and Diamond Hall, InterContinental Seoul COEX 6:00 7:30 p.m. All Turbo Expo registrants are invited to join their colleagues for complimentary light refreshments during the Monday evening event brought to you by the Turbo Expo 2016 Local Liaison Committee. Greet old friends, and meet the thinkers from around the world who are shaping the future of turbomachinery. A special and very popular event for rising engineers! Enjoy complimentary refreshments and network with fellow engineers, including a variety of turbomachinery industry personnel, as well as members of IGTI s Committees. Exposition Closing Ceremony Thursday, June 16, 2016 Expo Hall 1:45 p.m. Please join us as we announce the Peoples Choice booth display winners, the Student Poster winners, recognize outgoing Committee Chairs, the Young Engineer Turbo Expo Participation and Student Advisory Committee Travel Award recipients, and announce plans for Turbo Expo 2017 in Charlotte, North Carolina USA. MARK YOUR CALENDAR FOR: ASME 2017 Turbo Expo June 26 30, 2017 Charlotte, North Carolina USA Hope to see you there! Daily Lunches All Technical Conference registrants badges will include daily lunches. Expo Hall Receptions Tuesday & Wednesday, June 14 & 15, :00 6:30 p.m. All registered delegates are invited to the Expo Hall for complimentary refreshments and networking with industry colleagues, while viewing the exhibits of the industry s top companies. 10 ASME 2016 TURBO EXPO

11 Women Working in Turbomachinery Networking Event Tuesday, June 14, :45 10:30 p.m. Sponsored by GE and Siemens Female registrants are invited to join their colleagues for a complimentary networking event that will feature a talk by Li Zhang, GT Aux. Manager, SIEMENS Corp. Technology Gas Turbine Engineering, and Patricia Cargill, Principal Engineer, Fan & Compressor Aerodynamics, GE Aviation. During registration, be sure to select that you will be attending. Stop by the Information Desk in Registration if you have not confirmed your seat. Li Zhang Siemens Corporate Technology Manager of GT Auxiliary System Li started her career with 15 years technical experience focused on Energy industry fossil power plant customer order engineering design and project management at GE Energy Engineering Division and China National General Machinery Engineering Corporation in China. In 2009, Li joined Siemens Corporate Technology Gas Turbine Engineering to build up a gas turbine auxiliary system design team in China. Functions include: GT fuel gas, ignition gas, flame monitoring, fuel oil, lube oil, hydraulics, cooling air, blow off, pneumatic, NOx water and purge water systems R&D tasks for new frame engine and customer order engineering project management. Li applied her leading skill and team orientation to fully integrate Siemens global R&D product/system design process; customer order engineering project implementation process from pre-engineering design phase to site issue solution phase; hazard & operability studies, and failure modes root cause analysis, effectiveness analysis studies into the China team. Patricia Cargill GE Aviation Principal Engineer, Fan & Compressor Aerodynamics Patricia has 35 years experience in turbomachinery aerodynamics. She started her career at Garrett (now Honeywell), and moved to GE in She contributed to a broad range of commercial, military, and technology designs and tests, including the CFM56-7B compressor, GE s first 3D Aero compressor. She served as a manager for over ten years, and now enjoys a technical role where she consults on various aero programs and drives improvements in processes. FINAL PROGRAM 11

12 ASME Turbo Expo 2017 June 26-30, 2017 Charlotte, North Carolina. USA Co-located with asme.org/events/turbo-expo 12 ASME 2016 TURBO EXPO

13 Featured Lecture 2016 Aircraft Engine Technology Award Lecture Monday, June 13, 2016, Room 301, 2:30 p.m. Turbine Blade Cooling Research at Texas A&M For outstanding contributions to the field of air breathing propulsion through inspiring leadership, education and research, having major impacts on operational capability, performance, and design. Dr. Je-Chin Han is currently University Distinguished Professor and Marcus Easterling Endowed Chair Professor at Texas A&M University. He received his B.S. degree from National Taiwan University in 1970, M.S. degree from Lehigh University in 1973, and Sc.D. degree from M.I.T. in 1976, all in Mechanical Engineering. He has been working on turbine blade cooling, film cooling, and rotating coolant-passage heat transfer research for the past 40 years. He is the co-author of 220 journal papers and lead author of the book Gas Turbine Heat Transfer and Cooling Technology. He has served as editor, associate editor, and honorary board member for eight heat transfer related journals, and served as ASME K-14 Gas Turbine Heat Transfer Committee Chair ( ) and ASME K-3 Heat Transfer Honors and Awards Committee Chair ( ). He received the 2002 ASME Heat Transfer Memorial Award, the 2004 International Rotating Machinery Award, and the 2004 AIAA Thermophysics Award. He is a Fellow of ASME and AIAA. Special Thanks to the ASME Turbo Expo 2016 Local Liaison Committee Seung Jin Song, Chair, Seoul National University Sungkyu An, Korea Midland Power Company Limited Hyung Hee Cho, Yonsei University Hyungrok Do, Seoul National University Jin Zhang Feng, AVIC Commercial Aircraft Engine Co Kwangyol Lee, Doosan Heavy Industries & Construction Keun Ryu, Hanyang University Young Chang Shon, Hanwha Techwin Toshinori Watanabe, The University of Tokyo Soo-Seok Yang, Korea Aerospace Research Institute Supporting Publications Participating Organizations A standing committee of the FINAL PROGRAM 13

14

15 We gained a reputation for engineering excellence, one detail at a time. We know it s the small things that make a big difference. In fact it goes a very long way towards explaining why Rolls-Royce has become a world-leader in power systems and services on land, at sea and in the air. With manufacturing and service facilities in 50 countries and customers in well over 150 countries, we place a great deal of importance on the detail in order to maintain the very highest standards that our name has become associated with. It s what our clients have come to expect and we don t do it lightly. Last year alone we invested close to 1billion in research and development of our products and services. And, like everything else we do, we did it one detail at a time. Trusted to deliver excellence

16 STUDENT NEWS Student Advisory Committee The Student Advisory Committee, SAC, consists of Kathryn Kirsch (Chair), Jacob Snyder ( Vice Chair ), Diogo Berta Pitz (Secretary) and John McClintic (Past Chair), all of whom began their terms at the 2015 Turbo Expo student committee meeting in Montreal, Canada. Together, the four officers manage the committee, plan all student events and activities at Turbo Expo and represent the student community before the ASME IGTI Board. The SAC encourages all students and degree-seeking individuals to participate in the ASME IGTI Student Advisory Committee. We will be advertising more details about ASME 2017 Turbo Expo Conference very soon. ASME Turbo Expo hosts over 500 graduate and undergraduate students who present research findings, attend tutorials, visit the exhibition, and network with professionals. SAC Tutorial Session The Art of the Peer Review Process: Best Practices for Crafting and Responding to Paper Reviews Tuesday, June 14 9:00 10:30 a.m. E6 Dr. Karen A. Thole, Department Head of Mechanical and Nuclear Engineering, Professor of Mechanical Engineering, Pennsylvania State University This tutorial session will discuss the importance of quality peer reviews to the technical community and give best practices for creating reviews that are beneficial to the author(s). Additionally, this tutorial will walk through the steps of the review process and will pose best practices for responding to paper reviews. Discussion among session participants will be encouraged through the use of example paper reviews. SAC Poster Competition Tuesday, June 14, :30 2:30 p.m. The Student Advisory Committee is once again sponsoring a student poster session at ASME Turbo Expo Student posters will be on display on the main exposition floor on Tuesday, June 14th. Student poster finalists will be on display on Wednesday, June 15th from 12:30 p.m. 2:30 p.m. Be sure to stop by the poster session to see the results of their work and encourage them to become active in ASME. Cast your vote for the People s Choice Best Student Poster enter your selection at the computer station at the entrance to the exhibit hall. This year the cash prizes will be: 1st place - $1000, 2nd place - $500, and People s Choice - $250. SAC Panel Session Careers in Turbomachinery Wednesday, June 15, :00 5:30 pm Auditorium This panel session features established leaders in industry, academia, and government who have made important contributions to the development and our understanding of gas turbine engines. The panel will address the following: What does it take to be successful in each career path? What challenges will students face entering these careers? Within each career path, what types of opportunities are available? Panelists Dr. Alexander Mirzamoghadam, Staff Engineer, Honeywell International Dr. Lamyaa El-Gabry, Professor, The American University of Cairo Dr. Klaus Brun, Program Director, Southwest Research Institute Dr. Hany Moustapha, Professeur et Directeur AÉROÉTS Dr. Seung Jin Song, Professor, Seoul National University Thank You ASME Turbo Expo Student Poster Judges! The ASME IGTI Student Activity Committee would like to take this opportunity to thank the Turbo Expo Student Poster Judges for their diligent and meticulous judging efforts. Dr. Tim Allison, Southwest Research Institute Prof. David Bogard, University of Texas Dr. Klaus Brun, Southwest Research Institute Prof. Sergio Camporeale, Politecnico di Bari Dr. Ward de Paepe, Vrije Universiteit Brussel Dr. Jason Dees, General Electric Mr. Zhirui Dong, General Electric Dr. Kihyung Kim, General Electric Dr. Stephen Lynch, Pennsylvania State University Prof. Ricardo Martinez-Botas, Imperial College Dr. Jacqueline O'Connor, Pennsylvania State University Prof. Guillermo Paniagua, Von Karman Institute Dr. Marc Polanka, Air Force Institute of Technology Dr. Luca Porreca, MAN Alessandro Ramaglia, Ansaldo-Alstom Dr. Arnd Reichert, Siemens Dr. Peter Smout, Rolls-Royce 16 ASME 2016 TURBO EXPO

17 2016 Student Advisory Committee Travel Award (SACTA) Joshua Anderson The University of Texas Valeria Andreoli Purdue University Seung Il Baek Penn State Bogdan Cezar Cernat Von Karman Institute / UCL Louvain Kyle Chavez The University of Texas Kenneth Clark Penn State Cis De Maesschalck Purdue - VKI Brandon Ealy University of Central Florida Masha Folk University of Cambridge Silvio Geist Technical University of Berlin David Gonzalez Cuadrado Purdue University Niharika Gurram University of Oxford Shane Haydt Penn State Qiangqiang Huang Tsinghua University Nikola Kafedzhiyski KTH Royal Institute of Technology Ramesh Kumar University of Surrey Pradeep Kumar Srinivasan KTH Royal Institute of Technology Jan Kamenik University of Southampton Eric Lange Penn State 2016 Young Engineer Turbo Expo Participant Award (YETEP) Fangyuan Lou Purdue University Zhiping Mao Duke University Georg Atta Mensah Technical University of Berlin Xin Miao City University London Marina Montero Carrero Vrije Universiteit Brussel Sulfickerali Noor Mohamed University of Surrey Ikenna Anthony Okaro Newcastle University Marcel Otto University of Central Florida Utkudeniz Ozturk Polytechnic University of Catalonia Giteshkumar Patel Lappeenranat University of Technology Joseph Robert Saverin Technical University of Berlin Deepanshu Singh IIT Delhi Prashant Singh Virginia Tech Curtis Stimpson Penn State Mohammadreza Tahan Universiti Teknologi Petronas Hui Tang University of Bath Zhiduo Wang Xi'an Jiaotong University Juliane Wendler Technical University of Berlin Steven Whitaker The Ohio State University Michelle Wood University of Houston Manuel Würth Technical University of Munich Lisa Zander Technical University of Berlin Ali Afzalifar Lappeenranta University of Technology Travis Cable Texas A&M University Meera Day Southern Methodist University Jeffrey Defoe University of Windsor Chiara Gastaldi Politecnico di Torino Giacomo Gatti Politecnico di Milano David Holst Technical University Berlin Tobias Hummel Technical University of Munich Simon Jacobi University of Oxford Peter Kaluza RWTH Aachen University Daria Kolmakova Technical University of Munich Atanu Kumar Kundu Lund University Nguyen LaTray University of Texas at Arlington Yogini Patil Lappeenranta University of Technology Julien Pohl University of Leeds Robin Prenter The Ohio State University Jorge Saavedra Purdue University Swati Saxena GE Global Research Center Robert Schroeder Sargent & Lundy Vrishika Singh TU Delft Early Career Engineer & Student Mixer Wednesday, June 15, :45 8:00 p.m. Auditorium Lobby, COEX Center A special and very popular event for rising engineers! Enjoy complimentary refreshments and network with fellow engineers, including a variety of turbomachinery industry personnel, as well as members of IGTI s Committees and representatives from the sponsor Doosan Heavy Industries & Construction. FINAL PROGRAM 17

18 Student Poster Session Presenting Authors Pascal Bader, Graz University of Technology Measurement and Simulations of Flat-Plate Boundary Layers in Accelerated Flow Ali Baghchehsara, Hochschule Bremen Non-axial Hybrid Solar Micro Turbine Concept Sabine Bauinger, Graz University of Technology Impact of Different Shroud Configurations on Leakage Flow Michael Betz, Technical University of Munich Impact of Damper Parameters on the Stability Margin of an Annular Combustor Test Rig Bogdan C. Cernat, Von Karman Institute For Fluid Dynamics Active Tip Leakage Flow Control in High Pressure Turbines Cong Truong Dinh, Inha University Effects of Air Injection on Aerodynamic Performances of a Single-Stage Transonic Axial Compressor Thomas Eckert, University of Applied Sciences Munich Numerical Analysis of a Transonic Centrifugal Turbo Compressor with Various Diffusor Designs for the Operation in a Hybrid Sorption/Compression Heat Pump Cycle Silvio Geist, Technische Universität Berlin Numerical Investigation on Flutter Stability of an Aerodynamically Mistuned Oscillating Compressor Cascade Niharika Gurram, University of Oxford Study of Film Cooling in the Trailing Edge Region of a Turbine Blade Balbina Hampel, Technische Universität München Low NOx Combustion of Gaseous Hydrogen in a Combustion Chamber Based on the Principle of Cyclic Periodic Mixing Amir Ibrahim, University of Oxford Development of an Air-riding Flexible Face Seal Ikhee Jo, Hanyang University Test Apparatuses for Identification of Rotordynamic Coefficients and Drag Power of Externally Pressurized Porous Air Bearings Jan Kamenik, Jan Kamenik NASA Rotor 37 Uncertainty Quantification and Sensitivities Joshua Keep, The University of Queensland Development of a space marching throughflow code for radial inflow turbines Hanjong Kim, Pusan National University Fatigue assessment of Inconel 625 tubes at both room and elevated temperatures. Gisu Mun, Pusan National University Compact Heat Exchanger for High Temperature and High Pressure in Gas Turbine Engine Jong-Chan Kim, Korea Aerospace University A Study of the Effect of Turbulent Burning Velocity Models on the Annular Premixed Combustor using LES and Flamelet Approach Kyuman Kim, Hanyang University Rotordynamics Performance of Automotive Turbochargers: Vibration Characteristics Comparison between Fully Floating Ring Bearings and Semi- Floating Ring Bearings Nahyun Kim, Korea Maritime and Ocean university Structural Integrity Evaluation for Operating Conditions of Heat Exchanger in Aero Engine Viktoriia Klymenko, Korea Institute of Science and Technology Determination of the Characteristics of Foil Bearing with Fiber Mesh Structure Matthias Kunick, Zittau/Goerlitz University of Applied Sciences The New Spline-Based Table Look-Up Method (SBTL) for the Fast Calculation of Real Fluid Properties in CFD Simulations of Steam Turbines Jung Shin Park, Korea Aerospace University Heat Transfer and Aerodynamic Loss near a Gas Turbine Blade Tip with a Partial Cavity Ye Jee Kim, Korea Aerospace University Application of DBD Plasma to the Film Cooling on a Flat Plate with a Rectangular Slot Jeong Jin Lee, Inha university Numerical study on the influence of inter-stage flow addition on steam turbine performance Seulbi Lee, Pusan National University Fracture behaviors of Brazed Alloy 625 Thin Tube Specimens under cyclic loading Seung Yeob Lee, Korea University Numerical Investigation on a Turbine Exhaust Diffuser Performance with respect to End-wall and Strut Angles Lei Li, Nanyang Technological University Effect of Entropy Waves on Transient Energy Growth of Flow Disturbances in Triggering Thermoacoustic Instability James Little II, University of Central Florida Numerical Analysis Of Blade Vibration Forced Response Predictions 18 ASME 2016 TURBO EXPO

19 Student Poster Session Presenting Authors Sang-Bum Ma, Inha University Effects of discrete cavities on aerodynamic performance of a centrifugal compressor Zhiping Mao, Duke University Interaction Effect of Forced Response and Flutter Phenomena of a Compressor Stage Andrew Messenger, Durham University Development of a Dynamic Clearance Seal in a Rotating Facility Mohsen Modir Shanechi, The University of Queensland Design of Radial-Inflow Turbine Using Moderate- Temperature and High-Density Working Fluids for Concentrating Solar Power Systems Maria Pia Monterossi, Politecnico di Torino A New Test Rig Facility To Study Aeronautic Low Pressure Turbine Thermal Behavior Mehdi Khazaeian, K.N.Toosi University of Technology In-situ multi-scale damage observation in APS Thermal Barrier Coatings (TBC) using Digital Image Correlation and Acoustic Emission Ehsan Saberi, K.N.Toosi University of Technology Predicting creep rupture and creep crack growth using a unified mechanism based creep damage model Marcel Otto, University of Central Florida Heat Transfer in Rib-turbulated Pin Fin Arrays Tarannom Parhizkar, Sharif University of Technology Operation scheduling optimization framework for micro gas turbines based on system degradation Seong Hyun Park, Pusan National University Experimental study on the simulation of ice blockage at the inlet part of Fuel Oil Heat Exchanger Pedro Romero, Technische Universität München Design Concept and Workflow of a Second Stage Combustor Test Rig Florian Schönleitner, Graz University of Technology On the Influence of the Rotor Disk regarding the Modal Characteristics of a Low Pressure Turbine Rotor Blading Nicolai V. Stadlmair, Technische Universität München Thermoacoustic Analysis of Water Injection in a Lean Premixed, Swirl Stabilized Flame under Atmospheric Conditions Mohammadreza Tahan-Bouria, Universiti Teknologi PETRONAS Real-Time Performance-Based Automated Fault Detection and Isolation of Gas Turbine Engines using Multi-Nets Evolutionary Adaptive Neuro-Fuzzy Inference System Howon Yi, Hanyang University Measurements of Static Load Structural Parameters in Second Generation Bump-type Foil Journal and Thrust Bearings Lisa Zander, TU Berlin Optimization of Combustible Mixtures for Shockless Explosion Combustion FINAL PROGRAM 19

20 20 ASME 2016 TURBO EXPO

21

22 Try BOXERMesh 3.7 now! The Boxer Environment Supports End-to-end Parallel Simulation Fullly scalable to leverage current and future HPC Powerful, Reliable and Easy to use Tackles complex, real-world applications Simple integration for automated optimisation, design and analysis Delivers greater capability and productivity, at reduced cost Conjugate Thermal Simulation Fuel Injector - Gas Turbine Highly efficient higher-order LES Access now the power of distributed parallel computing VISIT US AT BOOTH

23 Session Participant Information Networking Coffee/Danish for Presenters and Session Organizers Monday, June 13 Friday, June 17 7:15 8:00 a.m. Hall C4 On the day of your scheduled presentation, a table will be reserved for your session. Meet with the other session participants and discuss session logistics. All session organizer materials will be distributed at this meeting. Complimentary coffee and pastry provided. Presentation Uploads Presenters (authors, panelists, tutorial instructors, lecturers) should plan to upload their presentations only on the computer in their session room. Please arrive 15 to 30 minutes prior to your session to upload your presentation. Presentations may be uploaded from a CD- ROM or USB flash drive. There will not be a central network server for the sessions. Audiovisual Equipment Provided Standard AV equipment provided in meeting rooms: LCD Projector Laptop Computer Projection Screen Microphone(s) Wireless Remote/Pointer Speaker Ready Room Room 310 Sunday, June 12 1:00 p.m. 6:00 p.m. Monday, June 13 7:00 a.m. 5:30 p.m. Tuesday, June 14 7:00 a.m. 5:30 p.m. Wednesday, June 15 7:00 a.m. 5:30 p.m. Thursday, June 16 7:00 a.m. 5:30 p.m. Friday, June 17 7:00 a.m. 3:30 p.m. Registration As a non-profit organization, ASME requires all presenters to register for the conference and pay an appropriate fee. We are pleased to offer all presenters the discounted ASME Member registration rate of $1,190 for 5-Day or $975 for 3-Day. Onsite registration is located in Hall C4. Badge Ribbons Role and attendance ribbons are available at the Information Desk in Registration. See the display for available options. Final Papers DVD/Paper Printing Stations All Technical Conference registrants are eligible to receive a DVD containing the collection of the technical papers accepted for presentation and publication plus online access. Presentation, such as panels or posters, that do not have an accompanying paper are considered to be oral Presentation Only and do not appear in the system. Please note that this is NOT the official proceedings of the Conference, which is published after the Conference and is also made available online on the ASME Digital Collection at org. As such, papers that appear in the system may not be cited until after the official Proceedings have been published. Registered ASME Turbo Expo 2016 technical conference attendees may view and print accepted conference papers at the 2016 Paper Printing Station in the exhibit hall. Need Assistance? ASME staff (red badges) and Session Assistants (yellow Assistant badges) are circulating the session room hallways to provide assistance as needed. COEX Convention Center FINAL PROGRAM 23

24 THE EXPOSITION 2016 Exhibit Directory Round out your conference experience by spending time Tuesday through Thursday in the exhibit hall featuring the latest technology offered by leading companies in the industry and an exhibitor presentation stage. Lunches and receptions in the exhibit hall each day will provide relaxed, yet focused networking opportunities. Exposition Open: Tuesday, June 14 12:30 p.m. - 6:30 p.m. Wednesday, June 15 12:30 p.m. - 6:30 p.m. Thursday, June 16 11:30 a.m. - 2:30 p.m. Don t miss the Exhibit Closing Ceremony at 1:45 p.m. Table of Contents Exhibitor Booth Listings Pages Product Categories.. Pages Reminders: No photographs can be taken in the exhibit hall without permission of Show Management and/or the exhibiting company. Place your votes for the People s Choice Best Booth Award and the People s Choice Best Student Poster at the entrance of the exhibit hall. See security personnel for emergencies and first aid assistance. PLEASE VISIT US AT TURBO EXPO AT BOOTH 400 DISCOVER BETTER DESIGNS. FASTER. MULTIDISCIPLINARY SIMULATION FOR CLEAN, EFFICIENT ENERGY AND ECONOMICAL, RELIABLE POWER Thank you to our Exhibit Advisory Committee. Please stop by and visit with our EAC members and give them your suggestions and feedback for making the Turbo Expo Exposition an even better event. A complete listing can be found on page 25. If you are interested in joining this committee, contact the ASME IGTI Expositions Department at igtiexpo@asme.org. GAS TURBINES PUMPS COMBUSTORS If you are interested in exhibiting at the 62nd ASME Turbo Expo in Charlotte, North Carolina next June, contact ASME IGTI at igtiexpo@asme. org or stop by the ASME IGTI Exhibit Sales Office in the exhibit hall to secure your booth or one of the sponsorship opportunities. We also have space and sponsorship opportunities for the 2017 Gas Turbine India Conference and Exposition next December in Bangalore. COMPRESSORS info@cd-adapco.com HEAT EXCHANGERS GENERATORS 24 ASME 2016 TURBO EXPO

25 Stage Presentation Schedule Every visitor, delegate and exhibitor at the EXPO can attend any of the following presentations, FREE OF CHARGE. Each is delivered by one of the Exhibitors at the EXPO - all of them leading experts in their field. Tuesday, June 14 1:00 1:30 pm Demonstration of Concepts NREC s throughflow solver solution method for fast design and accurate analysis of axial turbomachinery. The throughflow solver uses a state-of-the-art CFD based method that is fully functional across subsonic, transonic, and supersonic domains. The product can be used in both design and analysis modes and is closed coupled to Concepts NREC geometry design program AxCent. 1:45 2:15 pm The Application of Brush Seals to Increase Reliability and Efficiency in Process Steam Turbines presented by Peter Zanini from Waukesha Bearings Corporation 2:30 3:00 pm Current Status of Alternative Fuels and Future Directions presented by Chris Lewis from the University of Sheffield 3:15-3:45 pm SUNG-IL TURBINE CO., LTD. 4:00 4:30 pm Integrated Turbomachinery Design and Analysis with ANSYS 4:45 5:15 pm AxSTREAM, the Most Integrated and Comprehensive Turbomachinery and Thermodynamic Cycle Design, Analysis and Platform presented by Valentine Moroz from SoftinWay Inc Wednesday, June 15 1:00 1:30 pm Best practices for Advanced Gas Turbine Blading Upgrades presented by Abdul Nassar from SoftinWay Inc 1:45 2:15 pm Rotordynamics Analysis with ANSYS 2:30 3:00 pm Resolving Vibration Issues Using ISFD Technology presented by Jong Kim, PhD, from Waukesha Bearings Corporation 3:15-3:45 pm Overview of CRUNCH CFD Capabilities for Non-Ideal Fluid Combustion and Turbomachinery Applications presented by Raj Sinha from CRAFT Tech (UIT) 4:00 4:30 pm Gas Turbine Combustion Simulation with ANSYS CFD 4:45 5:15 pm AxSTREAM Net - Software for Simulation of Cooling System of Gas Turbines presented by Clement Joly from SoftinWay Inc Thursday, June 16 12:30-1:00 p.m. PCHE Recuperator Design and Cost Influence on Economic of sco2 Cycles presented by Dereje Shiferaw from Heatric 1:45-2:30 p.m. ASME Turbo Expo Closing Ceremony Turbo Expo Exhibit Advisory Committee Roster Mission: To assist in the growth and expansion of the Turbo Expo exhibit with continued support to exhibiting companies and ASME IGTI expositions staff. Representatives serve as experts for fielding questions and providing resources and initiatives for continued success of the exposition. Kim Aiken Parker Hannifin Corporation kaiken@parker.com Melvin Byrd Measurement Specialities Melvin.Byrd@te.com Travis Carrigan Pointwise, Inc travis.carrigan@pointwise.com Dr. Leonid Moroz SoftInWay Inc L.Moroz@softinway.com Dave Pincince Turbocam International dave.pincince@turbocam.com Dr. Benjamin O'Shea Präwest Präzisionswerkstätten GmbH & Co. KG / sekretariat@praewest.com If you are interested in joining this committee, contact Kristin Barranger at igtiexpo@asme.org. FINAL PROGRAM 25

26 Exhibit Hall Floorplan Lunch Entrance Stage Reception Reception Lunch Student Posters Entrance 2014 Solar Turbines Incorporated. All rights reserved. AD 2015 ASME THOROUGHLY PROVEN 26 ASME 2016 TURBO EXPO

27 Exhibitor Social Media Aerodyn Aerodyn Ltd Aeroprobe Corporation Aeroprobe Corporation ASME Turbo Expo ASME International Gas Turbine Institute Calnetix Technologies /Calnetix-Technologies /?fref=nf Calnetix Technologies Diesel & Gas Turbine Flownex Simulation Environment Flownex Simulation Environment Gas Turbines Informa Australia IfTA MMP Technology MTU Aero Engines /MTUAeroEnginesKarriere/ MTU Aero Engines OROS PBS Velka Bites /pbsvb PBS Velka Bites, a.s. Waukesha Bearings Corporation Waukesha Bearings Corporation Gyeongbokgung Palace FINAL PROGRAM 27

28 PLEASE REFER TO ONLINE EXHIBITOR DIRECTORY FOR EXHIBITING COMPANY LISTINGS.

29 Reach 140,000 ASME Members! Write a technical article for the Global Gas Turbine News! ASME IGTI is looking for timely technical content related to the gas turbine/turbomachinery industry. Articles should be approximately 800 to 1,000 words and non-commercial in nature. Submit your article today to igtinews@asme.org.

30 Exhibitor Product Categories 3D INSPECTION AND MEASUREMENTS Aerodyn Aeroprobe Corporation Flownex Simulation Environment Photron Limited Vectoflow GmbH AERODERIVATIVE GAS TURBINE REPAIR & OVERHAUL Liburdi Turbine Services Inc. MTU Aero Engines AIR SYSTEMS Flownex Simulation Environment MTU Aero Engines ANALYTICAL APEX Turbine Testing Technologies Flownex Simulation Environment MTU Aero Engines Photron Limited Waukesha Bearings Corporation ANCILLARY EQUIPMENT Parker Hannifin Photron Limited AUTOMATED 3D INSPECTION AND MEASUREMENTS Aerodyn AXIAL & CENTRIFUGAL COMPRESSORS Aerodyn CFturbo Software & Engineering GmbH Hanwha Techwin MTU Aero Engines COMPONENTS Aeroprobe Corporation MTU Aero Engines Parker Hannifin University of Sheffield, The Vectoflow GmbH Waukesha Bearings Corporation CONSULTING & ENGINEERING SERVICES Aerodyn Aeroprobe Corporation CFturbo Software & Engineering GmbH Flownex Simulation Environment Liburdi Turbine Services Inc. MTU Aero Engines Vacuum Process Engineering, Inc. Waukesha Bearings Corporation CONTROLS/INSTRUMENTATION Aerodyn Flownex Simulation Environment IfTA GmbH MTU Aero Engines OROS Parker Hannifin Pentair Technical Solutions UK Ltd Torquemeters Ltd. Vectoflow GmbH DESIGN PROCESS & METHODOLIGIES Flownex Simulation Environment Haynes International, Inc. MTU Aero Engines Photron Limited Vectoflow GmbH EDUCATION Flownex Simulation Environment Photron Limited University of Sheffield, The EXPANDERS Calnetix Technologies Hanwha Techwin FANS & BLOWERS CFturbo Software & Engineering GmbH Hanwha Techwin FILTERS Parker Hannifin FUEL SYSTEMS Calnetix Technologies Parker Hannifin University of Sheffield, The GAS TURBINES Aerodyn APEX Turbine Testing Technologies Calnetix Technologies Haynes International, Inc. IHI Corporation Kawasaki Heavy Idustries, Ltd. Liburdi Turbine Services Inc. MTU Aero Engines OPRA Turbines BV University of Sheffield, The GEAR TYPE COMPRESSORS Calnetix Technologies Hanwha Techwin GOVERNMENT ORGANIZATION Calnetix Technologies ISOTHERM COMPRESSORS Calnetix Technologies LASER MACHINING Vectoflow GmbH LASER WELDING Aerodyn MAINTENANCE AND OPERATION APEX Turbine Testing Technologies Flownex Simulation Environment Liburdi Turbine Services Inc. MTU Aero Engines OROS MANAGEMENT & MAINTENANCE OF ROTATING EQUIPMENT Flownex Simulation Environment Torquemeters Ltd. MANUFACTURING PROCESSES Aeroprobe Corporation Flownex Simulation Environment Haynes International, Inc. MTU Aero Engines Vacuum Process Engineering, Inc. Vectoflow GmbH MICROSCOPE SYSTEMS AND DIGITAL IMAGING Photron Limited MONITORING SOFTWARE APEX Turbine Testing Technologies EGT Co., Ltd. Flownex Simulation Environment IfTA GmbH Photron Limited Torquemeters Ltd. 30 ASME 2016 TURBO EXPO

31 Exhibitor Product Categories MOTION CONTROL EQUIPMENT Parker Hannifin OEM GAS TURBINE/POWER TURBINE Calnetix Technologies Haynes International, Inc. OPRA Turbines BV OIL SYSTEMS Flownex Simulation Environment MTU Aero Engines Parker Hannifin PACKAGE/TURNKEY APPLICATIONS Aerodyn Parker Hannifin Vacuum Process Engineering, Inc. PROCESS CONTROL SYSTEMS Flownex Simulation Environment PUBLICATION Energy-Tech Magazine SERVICE FOR TURBINES & COMPRESSORS APEX Turbine Testing Technologies Calnetix Technologies Flownex Simulation Environment Parker Hannifin SOFTWARE & COMPUTER HARDWARE APEX Turbine Testing Technologies CFturbo Software & Engineering GmbH Flownex Simulation Environment Photron Limited UIT Inc SOLAR Haynes International, Inc. STEAM TURBINES Calnetix Technologies Flownex Simulation Environment TurboPowerTech TESTING Aerodyn Aeroprobe Corporation APEX Turbine Testing Technologies Flownex Simulation Environment MTU Aero Engines Notre Dame Turbomachinery Laboratory OROS Photron Limited Torquemeters Ltd. University of Sheffield, The Vacuum Process Engineering, Inc. Vectoflow GmbH Waukesha Bearings Corporation VACUUM HEAT TREATING AND BRAZING SERVICES Vacuum Process Engineering, Inc WATERJET CUTTING/DRILLING Haynes International, Inc. People's Choice Award Enter for a chance to win 1 of 3 USD cash prizes by Casting Your Ballot for the People s Choice Best Booth Award Winners. $100 $250 $500 Congratulations to the 2015 People s Choice Award Winners Large Display: GE Three cash prize winners will be announced during the Closing Ceremony in the Exhibit Hall on Thursday, 1:45 pm. Cast Your Ballot for: Most creative display design Best display of technology Best overall exhibit Best method of crowd attraction Small Display: Liburdi Turbine Services, Inc. One vote per Registrant. Entrant must be present to win at the Closing Ceremony. To qualify for the prize drawings, votes must be cast by 1:00 p.m. on Thursday, June 16. Place your vote for both categories: Large Display (for booths 36sm and larger) AND Small Display (for booths less than 18sm in size) Vote Now for Your Chance to Win! Ballot kiosk at the entrance of the exhibit hall! Stop by now! Cast your ballot for the People's Choice Best Student Poster winner! FINAL PROGRAM 31

32 AWARD WINNERS Congratulations to all award recipients and thank you to all ASME IGTI committee award representatives whose work assists the awards and honors chair and the reading committee in the recognition of important gas turbine technological achievements ASME R. Tom Sawyer Award Awarded to an individual who has made important contributions to advance the purpose of the gas turbine industry and the International Gas Turbine Institute over a substantial period of time. The contribution may be in any area of Institute activity, but must be marked by sustained forthright efforts. Dr. Nicholas Cumpsty, Imperial College London 2014 ASME Gas Turbine Award The Gas Turbine Award was established in 1963 to be given in recognition of an outstanding contribution to the literature of noncombustion gas turbines thermally combined with nuclear or steam power plants. RECEIVING THE 2014 GAS TURBINE AWARD FOR THEIR PAPER: The Effect of Endwall Manufacturing Variations on Turbine Performance Dr. Robert Grewe, Siemens, Dr. Robert Miller, University of Cambridge, and Dr. Howard Hodson, Whittle Laboratory 2014 John P. Davis Award RECEIVING THE 2014 John P. Davis AWARD FOR THEIR PAPER: Modification of the Rolls-Royce Model MT5S Gas Turbine Engine Fuel Nozzle for Extended Fuel Flow Rates Jack Halsey, Rolls-Royce, Leonard L. Overton, Jr., Rolls-Royce, Dr. Philip E. O. Buelow, United Technologies Corporation, and David Bretz 2016 Industrial Gas Turbine Technology Award For outstanding contributions and industry leadership in low emissions combustion system research, design, development, and deployment. Dr. Klaus Brun, Southwest Research Institute 2016 Dilip R. Ballal Early Career Award Awarded to an individual who has made significant contributions in the gas turbine industry within the first five years of their career. Dr. Carl Sangan, University of Bath 2016 Aircraft Engine Technology Award For outstanding contributions to the field of air breathing propulsion through inspiring leadership, education, and research, having major impacts on operational capability, performance, and design. Dr. Je-Chin Han, Texas A&M For more details on the Award Winners, please refer to the 2016 Awards Program. Programs will be available during the Opening Session on Monday, June 13. Upcoming Award Opportunities IGTI STUDENT SCHOLARSHIP The deadline to submit an application is June 15, In the school year up to 20 scholarships at $2,000 (USD) each will be awarded to qualifying students registered at an accredited university (either in the U.S. or elsewhere) DILIP R. BALLAL EARLY CAREER AWARD Nominations for the 2017 award are due to igtiawards@asme.org by August 1, The Early Career Award is intended to honor individuals who have outstanding accomplishments during the beginning of their careers. An early career award is intended for those starting a professional career, which is typically after a relevant terminal degree: BS, MS, or PhD. A criterion of seven-years-from-degree will be used to define the nominee s eligibility. The nominee must receive the award prior to the completion of the seventh year beyond the terminal degree. The award consists of a plaque, funds to support the travel and registration costs to Turbo Expo, free ASME membership registration for five years, and a US $2000 honorarium. The recipient of the Early Career Award will be honored at Turbo Expo For more information on how to submit a nomination for an award, visit 32 ASME 2016 TURBO EXPO

33 N Seoul Tower FINAL PROGRAM 33

34 COMMITTEE INFORMATION Committee Chairs and Vice Chairs Aircraft Engine Chair: Outgoing - Keith Boyer Incoming Chair: Wing Ng Incoming Vice Chair: Wilfried Visser Ceramics Chair: Outgoing - Gregory Morscher Incoming Chair: Sai Sarva Incoming Vice Chair: Jun Shi Coal, Biomass & Alternative Fuels Chair: Outgoing - Simone Colantoni Incoming Chair: Ajay Agrawal Incoming Vice Chair: Pierre Q. Gauthier Combustion, Fuels & Emissions Chair: Ibrahim Yimer Vice Chair: Mike Klassen Controls, Diagnostics & Instrumentation Chair: Outgoing - Don Simon Incoming Chair: Lorenzo Ferrari Incoming Vice Chair: Sebastian Borguet Cycle Innovations Chair: Vassilios Pachidis Vice Chair: David Sánchez Education Chair: Outgoing - August Rolling Incoming Chair: Sabri Deniz Incoming Vice Chair: Devin O'Dowd Electric Power Chair: Outgoing - John Gülen Incoming Chair: Jeffrey A. Benoit Incoming Vice Chair: Seyfettin C. (John) Gulen Fans and Blowers Chair: Geoff Sheard Vice Chair: Alessandro Corsini Heat Transfer Chair: Outgoing - Nirm Nirmalan Incoming Chair: Phil Ligrani Incoming Vice Chair: John Blanton Industrial & Cogeneration Chair: Mustapha Chaker Vice Chair: Yiguang Li Manufacturing Materials & Metallurgy Chair: Outgoing - Laurent Cretegny Incoming Chair: Ashok Koul Incoming Vice Chair: Douglas Nagy Marine Chair: Desiree Deshmukh Vice Chair: Jack Halsey Microturbines, Turbochargers & Small Turbomachines Chair: Jeffrey Armstrong Vice Chair: Keun Ryu Oil & Gas Applications Chair: Tim Allison Vice Chair: Michele Pinelli ORC Power Systems Chair: Jos van Buijtenen Vice Chair: Carsten Trapp Steam Turbine Chair: Thomas Thiemann Vice Chair: Ivan McBean Structures & Dynamics Chair: Outgoing - Michael Enright Incoming Chair: Harald Schoenenborn Incoming Vice Chair: Jerzy T. Sawicki Student Advisory Chair: Outgoing - Katie Kirsch Incoming Chair: Jacob Snyder Supercritical CO2 Power Cycles Chair: Klaus Brun Vice Chair: Eric Clementoni Turbomachinery Chair: Pat Cargill Vice Chair: Ricardo Martinez-Botas Wind Energy Chair: Ken Van Treuren Vice Chair: George Pechlivanoglou Ancillary Events NUMECA s Lunch and Learn Session Tuesday, June 14 12:30 p.m. Auditorium Room 1A&B You are invited to attend NUMECA s Lunch & Learn Session. During this free lunch, our technical experts will provide you with a detailed overview of our brand new solutions for turbomachinery design and analysis. 34 ASME 2016 TURBO EXPO

35 Committee Meeting Schedule Group Date Time Location Aircraft Engine Committee Thursday, June 16 6:00-7:30 PM E1 ASME IGTI Board Meeting Sunday, June 12 1:00-5:00 PM 311 ASME IGTI Board Meeting Friday, June 17 12:30-5:30 PM 311 Ceramics Committee (Joint with MTST) Wednesday, June 15 6:00-7:30 PM E6 Coal, Biomass & Alternative Fuels Committee Thursday, June 16 6:00-7:30 PM E5 Combustion, Fuels & Emissions Committee Tuesday, June 14 6:00-7:30 PM E1 Controls, Diagnostics & Instrumentation Committee Wednesday, June 15 6:00-7:30 PM E2 Cycle Innovations Committee Thursday, June 16 6:00-7:30 PM E2 Education Committee Tuesday, June 14 1:15-2:15 PM E1 Electric Power Committee Not meeting during Turbo Expo. Fans and Blowers Committee Thursday, June 16 6:00-7:30 PM 317A GT India Chapter Meeting Wednesday, June 15 1:30-2:15 PM 317B Heat Transfer Committee Wednesday, June 15 6:00-7:30 PM 401 Industrial & Cogeneration Committee Tuesday, June 14 6:00-7:30 PM E2 Manufacturing Materials & Metallurgy Committee Tuesday, June 14 6:00-7:30 PM 317A Marine Committee Thursday, June 16 6:00-7:30 PM Offsite Microturbines, Turbochargers & Small Turbomachines Wednesday, June 15 6:00-7:30 PM E6 (joint with Ceramics Committee) Oil & Gas Applications Committee Thursday, June 16 6:00-7:30 PM E3 ORC Power Systems Committee Not meeting during Turbo Expo. Steam Turbine Committee Wednesday, June 15 6:00-7:30 PM E5 Structures & Dynamics Committee Tuesday, June 14 6:00-7:30 PM E5 Student Advisory Committee Thursday, June 16 5:30-7:00 PM E6 Supercritical CO2 Power Cycles Committee Wednesday, June 15 6:00-7:30 PM E1 Turbomachinery Committee Tuesday, June 14 6:00-7:30 PM 401 Wind Energy Committee Thursday, June 16 6:00-7:30 PM 308C Committee Point Contacts & Vanguard Chairs Aircraft Engine Konstantinos Kyprianidis Mälardalen University Ceramics Gregory Morscher The University of Akron Coal, Biomass & Alternative Fuels Simone Colantoni GE Oil & Gas Combustion, Fuels & Emissions Christian Oliver Paschereit Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin Controls, Diagnostics & Instrumentation Lorenzo Ferrari National Research Council of Italy Cycle Innovations Mario Luigi Ferrari University of Genoa Education Sabri Deniz Lucerne University of Applied Sciences Electric Power Justin Zachary Samsung Fans & Blowers Alessandro Corsini Sapienza University of Rome Heat Transfer: Combustors (with Combustion, Fuels & Emissions) Marc Polanka Air Force Institute of Technology Heat Transfer: Conjugate Heat Transfer Atul Kohli Pratt & Whitney Heat Transfer: Experimental Film Cooling Srinath Ekkad Virginia Tech. University Heat Transfer: Experimental Internal Cooling Lamyaa El-Gabry The American University of Cairo Heat Transfer: General Heat Transfer James P. Downs Florida Turbine Technology, Inc. Heat Transfer: Internal Air Systems & Seals (with Turbomachinery) Bijay K. Sultanian Takaniki Communications, LLC FINAL PROGRAM 35

36 Committee Point Contacts & Vanguard Chairs Heat Transfer: Numerical Film Cooling Malak Malak Honeywell International Heat Transfer: Numerical Internal Cooling Domenico Borello Università di Roma Sapienza Heat Transfer: Structures (with Structures & Dynamics) Thomas Weiss Rolls Royce Deutschland Ltd & Co. KG Heat Transfer: Tutorials Bijay K. Sultanian Takaniki Communications, LLC Industrial & Cogeneration Mustapha Chaker CB&I Manufacturing Materials & Metallurgy Laurent Cretegny General Electric Marine Desiree Deshmukh US Navy Microturbines, Turbochargers & Small Turbomachines Jeffrey Armstrong Flexenergy Energy Systems Inc. Oil & Gas Applications Tim Allison Southwest Research Institute Organic Rankine Cycle Power Systems Jos van Buijtenen Triogen B.V. Steam Turbines Thomas Thiemann Siemens AG Structures & Dynamics: Aerodynamic Excitation & Damping Toshinori Watanabe University of Tokyo Structures & Dynamics: Bearing & Seal Dynamics Keun Ryu Hanyang University Structures & Dynamics: Emerging Methods in Design & Engineering Chris Hulme General Electric (Switzerland) Structures & Dynamics: Fatigue, Fracture & Life Prediction Martin Hughes Siemens Industrial Turbomachinery Ltd. Structures & Dynamics: Probabilistic Methods Jeff Brown US Air Force Research Laboratory Structures & Dynamics: Rotordynamics Jeffrey Moore Southwest Research Institute Structures & Dynamics: Structural Mechanics, Vibration & Damping Lars Panning-von Scheidt Leibniz Universität Hannover Student Advisory Kathryn Kirsch Penn State University Student Poster Kathryn Kirsch Penn State University Supercritical CO2 Power Cycles Klaus Brun Southwest Research Institute Turbomachinery: Axial Flow Fan & Compressor Aerodynamics Nicole Key Purdue University Turbomachinery: Axial Flow Turbine Aerodynamics Luca Porreca MAN Diesel&Turbo Schweiz AG Turbomachinery: Design Methods & CFD Modeling for Turbomachinery Kurt Weber Rolls-Royce Corporation Turbomachinery: Ducts & Component Interactions Steven Burd Pratt&Whitney Corp. Turbomachinery: General Interest Ricardo Martinez-Botas Imperial College London Turbomachinery: Multidisciplinary Design Approaches, Optimization & Uncertainty Quantification Ingrid Lepot Cenaero (Centre de Recherche en Aéronautique) Turbomachinery: Noise & Innovative Noise Reduction (with Aircraft Engine) Jeff Defoe University of Windsor Turbomachinery: Radial Turbomachinery Aerodynamics Jan Ehrhard Continental Automotive GmbH Turbomachinery: Unsteady Flows in Turbomachinery Dale Vanzante NASA Glenn Research Center Wind Energy Kenneth Van Treuren Baylor University Time on wing is our thing. Clock up to 20 percent longer time on wing with a Pratt & Whitney FMP. You ll see lower total maintenance costs, better performance retention, improved reliability and higher residual value. Our advanced predictive analytics use big data to monitor performance and keep your engine on wing. Find out more at PRATT & WHITNEY FLEET MANAGEMENT PROGRAM Dependable Services 36 ASME 2016 TURBO EXPO

37 Thank You to Workshop Instructors Thank You ASME Turbo Expo Pre-Conference Workshop Instructors! ASME IGTI would like to thank the following instructors for sharing their knowledge, skills and time with all the engineers attending this year s ASME Turbo Expo Pre-Conference workshops: Physics-Based Internal Air Systems Modeling Dr. Bijay (BJ) K. Sultanian, Ph.D., PE, MBA, ASME Fellow, Founder & Managing Member Takaniki Communications, LLC, Oviedo, Florida, USA, Adjunct Professor - University of Central Florida, Orlando, Florida, USA Technology and Applications of Gas Turbine Coatings Dr. Purush Sahoo, Director, American Surface Modification, USA. Douglas Nagy, Manager IGT Components Repair, Liburdi Turbine Services Uncertainty Quantification and Turbomachinery Richard Ahlfeld, Imperial College; Francesco Montomoli, Imperial College; Andrea Panizza, General Electric Oil & Gas Introduction to Gas Turbine Performance Modeling with GSP Oscar Kogenhop, Netherlands Aerospace Center; Edward Rademaker, Netherlands Aerospace Center Gas Turbine Aerothermodynamics and Performance Calculations Syed Khalid, Parametric Solutions Inc. Bongeunsa Temple FINAL PROGRAM 37

38 COMMITTEE REGISTRATION INFORMATION Registration Reception Sunday, June 12 COEX, Hall C4 12:00 pm 3:00 pm Come early and beat the crowds while you enjoy Korean Rice Cakes and beer! Registration will remain open on Sunday until 6:00 pm. Registration Location/Hours COEX Center, Hall C4 Sunday, June 12 12:00 pm 6:00 pm Monday, June 13 7:00 a.m. 5:30 p.m. Tuesday, June 14 7:00 a.m. 6:30 p.m. Wednesday, June 15 7:00 a.m. 6:30 p.m. Thursday, June 16 7:00 a.m. 5:30 p.m. Friday, June 17 7:00 a.m. 3:00 p.m. Registrants for TURBO EXPO Technical Conference receive: Access to EVERY session in the Technical Conference Final Papers DVD comprised of all papers published for Turbo Expo 2016 plus online access. Certificate of Completion for Professional Development Hours (PDH s) Admission to the Opening Session - Keynote & ASME Awards Program (June 13) Admission to Tuesday s Plenary: Asset Optimization and Monitoring in the Information Age (June 14) Admission to Wednesday s Plenary: Gas Turbine Manufacturing in the Energy Age (June 15) Welcome Reception (June 13) Daily Lunch (June 13 17) Room Exhibition (June 14 16) Room Exhibit Hall Receptions (June 14 15) Opportunity to attend Facility Tours Free ASME Membership Non-member 5-day and 3-day registrants, plus students are eligible to receive a complimentary one-year ASME membership. Registrants in this category will receive an invitation within 90 days after the Show from ASME Membership with the invitation to join. Badge/Tickets Your badge is encoded with all payments made through conference registration. It is your only ticket and must be presented for admission to ticketed functions. Security For security reasons, your badge must be worn at all official Turbo Expo functions including Technical Conference sessions, the Welcome Reception, the Keynote Session, luncheons and in the Exposition. PDH Certificates Technical Conference delegates will receive their PDH (Professional Development Hours) certificate for attendance at ASME Turbo Expo 2016 in Seoul, South Korea by within 3-weeks following the conference. (5- day = 32.5 PDHs, 3-day = 19.5 PDHs). ASME Itinerary Planner Create your own personalized conference itinerary with the ASME Itinerary Planner Mobile App for the iphone, ipad, Android, and Blackberry. Add technical sessions, committee meetings, special events, personal appointments, and tours to your schedule. For more information, and to download the mobile app, please go to Conference Proceedings Printed volumes of the official Conference Proceedings may be ordered after the Conference by ing customercare@asme.org or by calling THE-ASME. All ASME Conference Proceedings are submitted for indexing to the Engineering index, which publishes COMPEN- DEX, SCOPUS, and a host of other indexing databases. Proceedings are also submitted to ISI for indexing in the Thomson Reuters Conference Proceedings Citation Index. Only presented papers are submitted. Technical Papers The collection of the technical papers accepted for presentation and publication for ASME Turbo Expo 2016 are posted online. Presentation, such as panels or posters, that do not have an accompanying paper are considered to be oral Presentation Only and do not appear in the system. Please note that this is NOT the official proceedings of the Conference, which is published after the Conference and is also made available online on the ASME Digital Collection at As such, papers that appear in the system may not be cited until after the official Proceedings have been published. Technical conference attendees may view accepted conference papers at the 2016 Paper Printing Station in the exhibition. 38 ASME 2016 TURBO EXPO

39 Software + Engineering Solutions TURBOMACHINERY MASTERED. AxSTREAM, the most integrated and comprehensive Turbomachinery and Thermodynamic cycle design, analysis and optimization platform Cycle Design Preliminary Design Meanline + Throughflow Analysis Blade Design, Analysis + Optimization CFD + FEA Design of Experiment + Optimization Performance Maps Secondary Flow Network Analysis Rotor Dynamics + Bearing Design Visit us at Turbo Expo Booth #1400

40 Joint Sessions Aircraft Engine with Turbomachinery WC-1-8, Room 327, Propellers and Open Rotors FB-1-1, Room E4, Inlets and Operability Aircraft Engine with Heat Transfer ThC-1-5, Room E4, Numerical and Experimental Investigations of Aero-engine Oil System Components Cycle Innovations with Turbomachinery FA-6-5, Room 402, Turbomachinery Design Aspects in Cycle Innovation Heat Transfer: Combustors with Combustion, Fuels & Emissions TC-17-2, Room 307B, Combustor Liner Cooling - Numerical and Optimization WC-17-1, Room 307B, Combustor Liner Cooling - Experimental and Validation ThC-17-3, Room 301, Combustor Heat Transfer Heat Transfer: Internal Air Systems & Seals with Turbomachinery Committee TC-15-2, Room 307A, Rotor-Rotor and Rotor-Stator Disc Cavities WB-15-1, Room 307B, Hot Gas Ingestion and Rim Seals I WC-15-3, Room 307A, Pre-Swirl Systems ThA-15-5, Room 307B, Brush and Miscellaneous Seals ThB--15-6, Room 307A, Leaf and Miscellaneous Seals FA-15-7, Room 307A, Miscellaneous Topics in Internal Air Systems Modeling FB-15-8, Room 301, Hot Gas Ingestion and Rim Seals II FC-15-4, Room 307A, Labyrinth Seals Steam Turbines with Structures & Dynamics: Fatigue, Fracture & Life Prediction FB-26-10, Room E2, HP/IP Turbines Blades and Rotor Steam Turbines with Structures & Dynamics: Structural Mechanics, Vibration & Damping TB-26-3, Room E2, LSB Vibrational Aspects I Steam Turbines with Structures & Dynamics: Aerodynamic Excitation & Damping TA-26-11, Room E2, LSB Vibrational Aspects II WB-26-1, Room E2, HP/IP Turbines Aerodynamics & Aeromechanical Structures & Dynamics: Aerodynamic Excitation & Damping with Turbomachinery ThA-34-2, Room 307C, Turbomachine Aeroelasticity and Computational Methods 2 ThB--34-3, Room 307C, Turbomachine Aeroelasticity and Computational Methods 3 ThC-34-1, Room 307C, Turbomachine Aeroelasticity and Computational Methods 1 FA-34-5, Room 307C, Turbomachine Aerodynamic Interaction and Forced Response 1 FB-34-4, Room 307C, Turbomachine Aeroelasticity and Computational Methods 4 FC-34-6, Room 307C, Turbomachine Aerodynamic Interaction and Forced Response 2 Wind Energy with Turbomachinery and Aircraft Engines TA-46-12, Room 402, Environmental Issues in Turbo Machinery is joint with Turbomachinery and Aircraft Engines Heat Transfer: Structures with Structures & Dynamics MA-18-1, Room 307B, Thermal-Structural Interaction - Fatigue and Life Prediction FB-18-2, Room 307A, Thermal-Structural Interaction - Experimental Validation Industrial & Cogeneration with Combustion, Fuels & Emissions ThA-20-7, Room 401, Combustion & Emissions Manufacturing Materials & Metallurgy with Ceramics MA-21-3, Room E5, Design, Manufacturing and Material Processing for Advanced Turbine Components TA-21-2, Room 318A, Development and Performance of TBC and Advanced Coating Systems Manufacturing Materials & Metallurgy with Structures & Dynamics: Fatigue, Fracture & Life Prediction WC-21-10, Room 402, Additive Manufacturing and Certification of Additive Manufacturing Parts Microturbines, Turbochargers & Small Turbomachines with Turbomachinery MB-23-9, Room 327, Turbochargers - Compressors & Turbines FA-23-4, Room 308C, Microturbine and Small Compressor Performance Gyeongbokgung Palace 40 ASME 2016 TURBO EXPO

41 Tutorials of Basics & User Sessions Tutorials of Basics Aircraft Engine TB-1-2, Room E6, Transient Engine Simulation - Its Role in Design and Development ThB-1-4, Room E6, Introduction to Aero Engine Conceptual Design and Technological Perspectives Ceramics ThC-2-3, Room 308B, Ceramic Matrix Composites for Hot Section Parts Combustion, Fuels & Emissions MB-4-32, Room E6, Combustion Fundamentals Cycle Innovations TB-6-11, Room E5, Introduction to Thermodynamics for Gas Turbine Cycles and Cycle Simulation ThB-6-10, Room 317A, Introduction to Dynamic Analysis and Modelling of Plant Systems Heat Transfer: Tutorials MA-14-3, Room 301, Heat Transfer Tutorials III MB-14-2, Room E5, Heat Transfer Tutorials II TB-14-1, Room 301, Heat Transfer Tutorials I Industrial & Cogeneration ThA-20-7, Room 401, Combustion & Emissions Manufacturing Materials & Metallurgy TB-21-8, Room 402, Metallurgy for Non-Metallurgists Microturbines, Turbochargers & Small Turbomachines MA-23-10, Room 317B, Oil-Free Bearings for High Speed Small Turbomachinery TA-46-12, Room 402, Environmental Issues in Turbomachinery MB-46-8, Grand Ballroom, Introduction to Wind Energy User Sessions Manufacturing Materials & Metallurgy ThB-21-7, Room 401, Life Extension of Gas Turbine Components Oil & Gas Applications MA-24-11, Room 402, Basics of Turbomachinery Modelling and Simulation: Lumped Parameter Dynamic Models and CFD Models MB-24-12, Room 317A, Compressor Fouling Mechanisms and Modeling WA-24-13, Room E5, Compression System Dynamics WC-24-9, Room 317A, Turbomachinery Instrumentation Components, Practices, and Uncertainty WC-24-17, Room E6, Oil & Gas Applications FB-24-15, Room E6, Basics of Rotordynamics Instrumentation & Data Acquisition Steam Turbines ThA-26-4, Room E2, LSB Design & Wetness MB-26-8, Room E2, Steam Turbine Design and Operational Aspects WC-26-14, Room 403, Steam Turbine Panel FA-26-2, Room E6, HP/IP Turbines Blade Design and Operation Structures & Dynamics: Aerodynamic Excitation & Damping FA-34-5, Room 307C, Turbomachine Aerodynamic Interaction and Forced Response Turbomachinery: Axial Flow Turbine Aerodynamics WB-38-6, Room 327, Low pressure Turbine Aerodynamics I Oil & Gas Applications TA-24-16, Room 401, High Pressure Compression for Injection, EOR and CO2 storage TB-24-14, Room 401, Aeroderivatives & Light Industrial Gas Turbine Engines: Upgrades & Updates WA-24-7, Room 401, System Integration and Operation WA-24-13, Room E5, Compression System Dynamics WB-24-4, Room 402, Gas Turbine Fouling and Erosion WC-24-17, Room E6, Oil & Gas Applications ThA-24-5, Room E5, Multiphase Expanders and LNG Systems ThB-24-18, Room E5, Fundamentals of Wet Gas Compression ThC-24-2, Room 317A, Compressor Stations FA-24-20, Room 317A, Transient Performance of Turbo-Generators Steam Turbines TC-26-13, Room E2, Mechanical Integrity of Steam Turbines Supercritical CO2 Power Cycles MA-36-11, Room 401, Introduction to sco2 Power Cycles ThB-36-8, Room 317B, Heat Exchangers for Supercritical CO2 Power Cycles Bongeunsa Temple Wind Energy MA-46-9, Room E6, Wind Turbine Blade Design FINAL PROGRAM 41

42 Facility Tours Please note that space is limited for all tours. All tours are conducted at the discretion of the host company and under the conditions the company establishes, including restrictions and pre-screening of participants. All tours are subject to cancellation. Korea Midland Power Company (KOMIPO) Thursday, June 16, :00 a.m. 3:30 p.m. Schedule: 1:00 2:00 p.m. Travel to Bucheon Powerplant from the COEX 2:00 3:00 p.m. Tour the Bucheon Powerplant 3:00 4:00 p.m. Leave Bucheon and tour Incheon Engine Test Cell 4:00 5:00 p.m. Travel back to the COEX Location: Bucheon-si Gyeonggi-do and Incheon, South Korea Transportation: Bus transportation will be provided Registration: Space is limited to 25 participants. KOMIPO own and operate various power plants from steam power plant and internal combustion and combined cycle thermal power generation plant to renewable energy facilities. The tour will consist of a visit of the energy world (promotion hall), the observatory of No 3 Power Plant and control room in Boryeong thermal plant division and Shin Boryeong thermal plant construction site division. Schedule: 7:00 9:30 a.m. Travel from the COEX to the KOMIPO Power Plant 9:30 11:40 a.m. Tour of the facility 11:40 a.m. 1:00 p.m. Complimentary lunch 1:00 3:30 p.m. Travel back to the COEX Registration for the facility tours was done online in advance of the event. Don't Miss these Incredible Displays in the Exhibit Hall! Location: Boryeong-si, Chungcheongnam-do, South Korea Transportation: Bus transportation will be provided Registration: Space is limited to 40 participants. Korean Air Friday, June 17, :00 p.m. 5:00 p.m. Bucheon Powerplant Maintenance Center Korean Air has acquired both local and foreign certificates from FAA, EASA, CAAC, TDCA and ANAC which give an authorization to overhaul and repair foreign airlines engines as well as Korean Air s. Powerplant Maintenance Center consists of four plants which include Engine & Module Maintenance Plant, Part Inspection & Repair Plant, Part Inspection & Metal Process Repair Plant and Engine Test Cell. Korean Air has carried out more than 4,000 engine overhaul and repair since 1972 with 350 dedicated and highly skilled engine specialists. Currently it has full overhaul capabilities for PW4056/62, PW4168/70, PW4090, CFM56-7B engine and hot section overhaul capability for GE90 engine model. Incheon Engine Test Cell (Incheon Aviation Tech Co., Ltd.) In 2010, Korean Air and Pratt & Whitney has established JV Company, Incheon Aviation Tech Co., Ltd. and built a new engine test cell in IFEZ (Incheon Free Economic Zone) in It is one of the world s largest engine test cells with 14 x 14 meters of test cell chamber size, capable of engine acceptance test of large commercial engines above 150,000 lbs. of thrust rating. Starting from 2016, GE90 and PW4090 engines are being tested in this new facility and the addition of PW4170 & PW4168 engines is planned in 2Q This facility will take a pivotal role for Korean Air to extend its engine MRO capabilities down the road to provide engine MRO and test services for both Korean Air and foreign customers. 42 ASME 2016 TURBO EXPO

43 Session Schedule Consult pages for the detailed Technical Conference session schedule. All turbine user-oriented sessions are listed on page 45. All Tutorials of Basics sessions are listed on page 45. All sessions are conducted in English. Session ID Key The Session ID is comprised of the day code and the original session number from the conference web tool. MA - Monday, June 13 8:00-10:00 AM MB - Monday, June 13 2:30-5:30 PM TA - Tuesday, June 14 9:00-10:30 AM TB - Tuesday, June 14 10:45 AM - 12:45 PM TC - Tuesday, June 14 2:30-5:30 PM WA - Wednesday, June 15 9:00-10:30 AM WB - Wednesday, June 15 10:45 AM - 12:45 PM WC - Wednesday, June 15 2:30-5:30 PM ThA - Thursday, June 16 8:00-10:00 AM ThB - Thursday, June 16 10:15 AM - 12:15 PM ThC - Thursday, June 16 2:30-5:30 PM FA - Friday, June 17 8:00-10:00 AM FB - Friday, June 17 10:15 AM - 12:45 PM FC - Friday, June 17 2:30-5:30 PM FINAL PROGRAM 43

44 Session Schedule Guide Sessions are detailed vertically. The top rows contain general information, and the bottom rows list the organizer and paper details. Presentation times are noted to the left. Column Detail Example COMMITTEE/TRACK NAME COMBUSTION, FUELS & EMISSIONS Session Title Novel Combustion Concepts I Session Type Room Session ID Session Chair, Affiliation Session Co-Chair(s), Affiliation(s) Paper Session Room 317C MA-4-5 Session Chair: Bernd Prade, Siemens AG KWU Session Co-Chair: Adnan Eroglu, GE PRESENTATION TIME Paper Title ASME Paper Number Author(s), Affiliation(s) 8:00 8:30 Short Helical Combustor: Dynamic Flow Analysis in a Combustion System With Angular Air Supply GT Behdad Ariatabar, Karlsruhe Institute of Technology, Karlsruhe, BW, Germany, Rainer Koch, Karlsruhe Institut of Technology (KIT), Karlsruhe, Germany, Hans-Jorg Bauer, KIT - Institute for Thermal Turbomachinery (ITS), Karlsruhe, BW, Germany Numerical Studies of Multi-Cycle Detonation Induced by Shock Focusing GT Zhihong Zhang, Zhiqiang Li, Yunke Wu, BeiHang University, Beijing, Beijing, China, Xingdong Bao, The Second Academy of China Aerospace Science and Industry Corporation, Beijing, Beijing, China 9:00 Experimental and Numerical Investigations of a Mild Combustor Applied for Gas Turbine GT Yan Xiong, ZiChen Zhou, MingMing Huang, Zhedian Zhang, Yunhan Xiao, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China 9:30 Numerical and Experimental Results From a Common-Source High-G Ultra-Compact Combustor GT Andrew E. Cottle, Marc Polanka, Air Force Institute of Technology, WPAFB, OH, United States 44 ASME 2016 TURBO EXPO

45 MONDAY, JUNE 13 8:00-10:00 AM COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS CONTROLS, DIAGNOSTICS & INSTRUMENTATION Novel Combustion Concepts I Combustion Dynamics: Tools Development Gas Turbine Fault Diagnostics Paper Session Room 317C MA-4-5 Paper Session Room E3 MA-4-21 Paper Session Room 308B MA-5-3 Session Chair: Bernd Prade, Siemens AG KWU Session Co-Chair: Adnan Eroglu, GE Session Chair: Jonas Moeck, TU Berlin Session Co-Chair: Alessandro Scarpato, GE Power Session Chair: Syed Khalid, Gas Turbine Systems Solutions, LLC Session Co-Chair: Craig Davison, National Research Council Canada Session Co-Organizer: Liang Tang, Pratt & Whitney 8:00 8:30 Short Helical Combustor: Dynamic Flow Analysis in a Combustion System With Angular Air Supply GT Behdad Ariatabar, Karlsruhe Institute of Technology, Karlsruhe, BW, Germany, Rainer Koch, Karlsruhe Institut of Technology (KIT), Karlsruhe, Germany, Hans-Jorg Bauer, KIT - Institute for Thermal Turbomachinery (ITS), Karlsruhe, BW, Germany Numerical Studies of Multi-Cycle Detonation Induced by Shock Focusing GT Zhihong Zhang, Zhiqiang Li, Yunke Wu, BeiHang University, Beijing, Beijing, China, Xingdong Bao, The Second Academy of China Aerospace Science and Industry Corporation, Beijing, Beijing, China Linearized Euler Equations for the Prediction of Linear High-Frequency Stability in Gas Turbine Combustors GT Moritz Schulze, Technische Universitaet Muenchen, Garching bei Muenchen, Bavaria, Germany, Tobias Hummel, Technische Universitaet Muenchen, Garching, Germany, Noah Klarmann, Technische Universität München, Garching, Germany, Frederik M. Berger, Technical University of Munich, Garching, Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany Influence of Nonlinear Flame Models on Thermoacoustic Instabilities in Combustion Chambers GT Giovanni Campa, Ansaldo Energia, Genova, Italy, Roberto Cademartori, Università di Genova, Genova, Italy Fault Detection Using Reduced Rank Linear Engine Models GT Cody Allen, Solar Turbines Inc, San Diego, CA, United States, Chad Holcomb, Solar Turbines Inc., San Diego, CA, United States, Mauricio de Oliveira, University of California San Diego, La Jolla, CA, United States Model Based Diagnostics of AE-T100 Micro Gas Turbine GT mariam mahmood, Alessio Martini, Università di Genova, Italy., Genova, Italy, Alberto Traverso, Univ Of Genova, Genova 16145, Italy, Enrico Bianchi, Ansaldo Energia, Genova, Italy 9:00 Experimental and Numerical Investigations of a Mild Combustor Applied for Gas Turbine GT Yan Xiong, ZiChen Zhou, MingMing Huang, Zhedian Zhang, Yunhan Xiao, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China Uncertainty Quantification of Growth Rates of Thermoacoustic Instability by an Adjoint Helmholtz Solver GT Camilo F. Silva, Technische Universität Muenchen, Garching bei München, Bayern, Germany, Luca Magri, Stanford University, California, CA, United States, Thomas Runte, Technische Universität München, Munich, Germany, Wolfgang Polifke, Technische Universität München, Garching, Germany An Approach to Sensor Failure Recovery Using a Neural Network Based Adaptive Observer GT Sinan Ekinci, Gonenc Gursoy, Aerotim Engineering, Ankara, Turkey, Ilkay Yavrucuk, Oguz Uzol, Middle East Technical University, Ankara, Turkey 9:30 Numerical and Experimental Results From a Common-Source High-G Ultra-Compact Combustor GT Andrew E. Cottle, Marc Polanka, Air Force Institute of Technology, WPAFB, OH, United States An Acoustic Time-of-Flight Approach for Unsteady Temperature Measurements: Characterization of Entropy Waves in a Model Gas Turbine Combustor GT Dominik Wassmer, TU Berlin, Berlin, Berlin, Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Jonas Moeck, TU Berlin, Berlin, Berlin, Germany Model-Based Fault Diagnosis for Performance Degradations of Turbofan Gas Path via Optimal Robust Residuals GT Chao Yang, Xiangxing Kong, AVIC Academy of Aeronautic Propulsion Technology, Beijing, Beijing, China, Xi Wang, Beihang University, Beijing, Beijing, China FINAL PROGRAM 45

46 MONDAY, JUNE 13 8:00-10:00 AM FANS & BLOWERS HEAT TRANSFER: NUMERICAL INTERNAL COOLING HEAT TRANSFER: TUTORIALS Experimental Methods and Studies Numerical Internal Cooling: Effects of Coolant Swirl and Channel Rotation Heat Transfer Tutorials III Paper Session Room 308C MA-9-2 Paper Session Room 307A MA-11-1 Tutorial Session Room 301 MA-14-3 Session Chair: Janos Vad, Budapest Univ Tech & Economics Session Co-Chair: Giovanni Delibra, Sapienza University of Rome Session Organizer: Li He, University of Oxford Session Co-Organizer: Mounir Ibrahim, Cleveland State University Session Organizer: Andrew Nix, West Virginia University 8:00 Experimental Investigation on Double Anti-Stall Ring Effects on Reversible Ventilation Fan Performance GT David Volponi, Sapienza University of Rome, Rome, Italy, Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States, Giovanni Delibra, Sapienza University of Rome, Rome, Italy Conjugate Heat Transfer Analysis of a Blade Leading Edge Cooling Configuration Using Double Swirl Chambers GT Karsten Kusterer, B&B-AGEMA, Aachen, Germany, Peter Bühler, Gang Lin, Takao Sugimoto, B&B-AGEMA GmbH, Aachen, Germany, Dieter Bohn, RWTH Aachen, Aachen, Germany, Masahide Kazari, Ryozo Tanaka, Kawasaki Heavy Industries, Ltd., Akashi, Japan Heat Transfer with Combustors GT Marc Polanka, Air Force Institute of Technology, WPAFB, OH, United States 8:30 Fouling Detection in Low Speed Fan Using Near-Field Diy Sound Pressure Sensors GT Cecilia Tortora, Alessandro Corsini, Sapienza University of Rome, Roma, Italy LES-Based Assessment of Rotation-Sensitized Turbulence Models for Prediction of Heat Transfer in Internal Cooling Channels of Turbine Blades GT Domenico Borello, Università di Roma Sapienza, Rome, Italy, A. Salvagni, Sapienza Università di roma, Rome, Roma, Italy, Franco Rispoli, Sapienza University of Rome, Rome, Italy, Ermanno Properzi, Sapienza Università di Roma, Roma, RM, Italy Heat Transfer: Experimental Film Cooling GT Srinath Ekkad, Virginia Tech. University, Blacksburg, VA, United States 9:00 Study on the Effect of Inlet Geometry on the Noise of an Axial Fan, With Involvement of the Phased Array Microphone Technique GT Tamas Benedek, Budapest University Techn Econ, Budapest, Hungary, Janos Vad, Budapest Univ Tech & Economics, Budapest H1111, Hungary Numerical Study on Effects of Jet Nozzle Angle and Number on Vortex Cooling Behavior for Gas Turbine Blade Leading Edge GT Changhe Du, Liang Li, Xiuxiu Chen, Xiaojun Fan, Xi an Jiaotong University, Xi an, Shaanxi Province, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China Introduction to Experimental Internal Cooling GT Lamyaa El-Gabry, The American University of Cairo, New Cairo, Egypt 9:30 Study on the Reverse Rotating Character Driven by the Backflow on a Centrifugal Fan System GT Xiaoyun QU, Tong Wang, Shanghai Jiaotong University, Shanghai, China, Jongho An, Kim Chaek Polytechnical University, Pyongyang, Democratic People s Republic of Korea Experimental and Numerical Study of Heat Transfer Performance for an Engine Representative Two-Pass Rotating Internal Cooling Channel GT Zhi Wang, E.T.S.I.Aeronautica y del Espacio, UPM, Madrid, Spain, Roque Corral, ITP, Alcobendas (Madrid), Spain, Francois Chedevergne, ONERA, Chatillon Cedex, France Internal Air Systems & Seals GT Bijay K. Sultanian, Takaniki Communications, LLC, OVIEDO, FL, United States 46 ASME 2016 TURBO EXPO

47 MONDAY, JUNE 13 8:00-10:00 AM HEAT TRANSFER: STRUCTURES (WITH STRUCTURES & DYNAMICS) MANUFACTURING MATERIALS & METALLURGY MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES Thermal-Structural Interaction - Fatigue and Life Prediction (Joint Session with S&D) Design, Manufacturing and Material Processing for Advanced Turbine Components Oil-Free Bearings for High Speed Small Turbomachinery Paper Session Room 307B MA-18-1 Paper Session Room E5 MA-21-3 Tutorial Session Room 317B MA Session Chair: Scott Yandt, National Research Council Canada Session Co-Organizer: Gulcharan Brainch, GE Session Chair: Bernd Prade, École Polytechnique de Montréal Session Co-Chair: Dr. Serge Selezneff, SNECMA, Elsa Piollet, École Polytechnique de Montréal, Piero-Daniele Grasso, General Electric (Switzerland) GmbH Session Chair: Keun Ryu, Hanyang University 8:00 Turbine Blade Life Prediction Using Fluid-Thermal-Structural Interaction Simulation GT Iroizan Ubulom, UNSW-Canberra, Canberra, Canberra, Australia, Alan Fien, A.J. Neely, University of new South Wales, canberra, Australia, Krishnakumar Shankar, UNSW-Canberra, Nottcott Drive, Not Applicable, Australia A Reliable Transition Duct With Separation Planes for the Annular Combustor of GT13E2 Gas Turbine GT Remigi Tschuor, General Electric (Switzerland) GmbH, Baden, CH, Switzerland, Bogdan Trbojevic, Alen Markovic, General Electric (Croatia) Ltd., Karlovac, Croatia (Hrvatska) Overview of Gas Bearings GT Luis San Andres, Texas A & M Univ, College Station, TX, United States, Keun Ryu, Hanyang University, Ansan, Gyeonggi-do, Korea (Republic) 8:30 Development of Temperature Estimation Method for a Gas Turbine Transition Piece GT Mitsutoshi Okada, Toshihiko Takahashi, CRIEPI, Yokosuka, Japan, Susumu Yamada, CRIEPI, Yokosouka, Japan, Takayuki Ozeki, Tomoharu Fujii, CRIEPI, Yokosuka, Japan High Temperature Deformation of Inconel 718Plus GT Utkudeniz Ozturk, Polytechnic University of Catalonia, Barcelona, Catalonia, Spain, Jose Maria Cabrera, Polytechnic University of Catalonia, Fundacio CTM Centre Tecnologic, Barcelona, Manresa, Spain, Jessica Calvo, UPC, Barcelona, Spain Bump type foil bearings: Structural characteristics and rotordynamic force coefficients GT Mihai Arghir, Universite De Poitiers - Instit Pprime, D3, Futuroscope Chasseneuil 86962, France 9:00 Thermal Mechanical Fatigue and Creep Interaction in Turbine Housing Divider Wall Design GT Wei Guo, Henry Guo, honeywell, Shanghai, China Material Selection Issues for A Nozzle Guide Vane against Service Induced failure GT Xijia Wu, Zhong Zhang, National Research Council Canada, Ottawa, ON, Canada, Leiyong Jiang, National Research Council, Ottawa, ON, Canada, Prakash Patnaik, Institute for Aerospace Research, National Researc, Ottawa, ON, Canada Overview of hybrid (hydrostatic & controllable) gas bearings & Active magnetic bearings GT Ilmar Ferreira Santos, Technical University of Denmark, Kgs. Lyngby, Denmark 9:30 The Effect of Thermochemical Non-Equilibrium on the Aerodynamics of Osculating-Cone Waverider GT ZHEN LIU, LIU JUN, DING FENG, XIA ZHIXun, National University of Defense Technology, Changsha, China Towards High Productive Roughing of Profiled Grooves in Nickel Based Alloys GT Fritz Klocke, WZL of RWTH Aachen University, Aachen, Germany, Benjamin Döbbeler, Laboratory for Machine Tools and Production Engineering of RWTH Aachen University, Aachen, Germany, Martin Seimann, Marvin Binder, WZL of RWTH Aachen University, Aachen, Germany Implementation of foil bearings in a micro gas turbine system & Integration of active magnetic bearings into commercial systems GT Daniel Lubell, Oil-Free Machinery, Yorba Linda, CA, United States FINAL PROGRAM 47

48 MONDAY, JUNE 13 8:00-10:00 AM OIL & GAS APPLICATIONS OIL & GAS APPLICATIONS STEAM TURBINES Wet Gas Compression and Pumps Basics of Turbomachinery Modelling and Simulation: Lumped Parameter Dynamic Models and CFD models Steam Turbine Valves Paper Session Room 317A MA-24-8 Tutorial Session Room 402 MA Paper Session Room E2 MA-26-7 Session Chair: Melissa Poerner, Southwest Research Institute Session Co-Chair: William Maier, Dresser-Rand Session Chair: Mirko Morini, University of Parma Session Co-Chair: Michele Pinelli, University of Ferrara Session Chair: Cosimo Bianchini, Ergon Research 8:00 Industry Perspectives and Experience with Wet Gas Compression GT Grant Musgrove, Griffin Beck, Melissa Poerner, Southwest Research Institute, San Antonio, TX, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Gary Bourn, Anadarko, Denver, CO, United States System Simulation by Means of Lumped Parameter Dynamic Models GT Mirko Morini, University of Parma, Parma, Italy Rapid Close of a Butterfly Valve Placed in a Curved Channel: A Computational Study of Unsteady Steam Flow and Aerodynamic Torque GT Peng WANG, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, Shanghai, China, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China, Zhiqiang Hu, Shanghai Electric Power Generation Equipment Co.,Ltd., shanghai, shanghai, China, SIHUA XU, Shanghai Electric Power Generation Equipment Co.,Ltd., Shanghai, China 8:30 Variable Inlet Guide Vane Effect on Centrifugal Compressor Performance in Wet Gas Flow GT Levi André Berg Vigdal, NTNU, Trondheim, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway Part II: System Simulation by Means of Lumped Parameter Dynamic Models GT Mirko Morini, University of Parma, Parma, Italy Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects GT Clemens Bernhard Domnick, University of Duisburg Essen, Duisburg,, Germany, Friedrich-Karl Benra, Univ of Duisburg-essen, Duisburg 47048, Germany, Dieter Brillert, Univ. of Duisburg-Essen, Duisburg, Germany, Christian Musch, Siemens AG, Mulheim an der Ruhr, Germany, Hans Josef Dohmen, University of Duisburg-Essen, Duisburg, Germany 9:00 9:30 WET GAS COMPRESSION: PERFOR- MANCE TEST OF A 3D IMPELLER AND VALIDATION OF PREDICTIVE MODEL GT Veronica Ferrara, Norwegian University of Science and Technology, Trondheim, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway, Stefano Falomi, GE Oil & Gas, Florence, Italy, Alberto Scotti Del Greco, GE, Florence, Italy, Italy, Matteo Bertoneri, GE Oil & Gas, Firenze, Italy, Giuseppe Sassanelli, GE Oil & Gas, Florence, Italy A Transient 3D CFD Model of a Progressive Cavity Pump GT k.r. Mrinal, M. H. Siddique, Abdus Samad, iit madras, chennai, India Experimental Study of the Influence of the Operating Parameters on the Performance and Capability of a Mixed-Flow Multiphase Pump GT Alberto Serena, Norwegian University of Science and Technology, Trondheim, OO, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway Component Characterization by Means of CFD Simulations GT Michele Pinelli, University of Ferrara, Ferrara, Italy Part II: Component Characterization by Means of CFD Simulations GT Michele Pinelli, University of Ferrara, Ferrara, Italy Experimental and Numerical Investigation of Quick Closing Buffer Performance of Steam Turbine Admission Valve GT Lei Xiao, Shanghai Electric Power Generation Equipment Co., Ltd. Shanghai Turbine Plant, Shanghai, China, SIHUA XU, Shanghai Electric Power Generation Equipment Co.,Ltd., Shanghai, China, jin he, ShangHai Electric Group, ShangHai, ShangHai, China, Zhiqiang Hu, Shanghai Electric Power Generation Equipment Co.,Ltd., shanghai, shanghai, China, Xiaogang Zhou, Intesim, Dalian, Dalian, China Experimental Investigation of the Flow in a Control Valve of an Industrial Steam Turbine GT Jan-Peter Zess, HSU Hamburg, Hamburg, Germany, Thomas Polklas, MAN Diesel & Turbo SE, Oberhausen, Germany, Franz Joos, Helmut- Schmidt University, Hamburg D, Germany 48 ASME 2016 TURBO EXPO

49 MONDAY, JUNE 13 8:00-10:00 AM STRUCTURES & DYNAMICS: EMERGING METHODS IN DESIGN & ENGINEERING STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING SUPERCRITICAL CO2 POWER CYCLES Optimization & New Methods Development Mistuning of Blisks and Bladed Disks II Introduction to sco2 Power Cycles Paper Session Room 300 MA-27-1 Paper Session Room 307C MA-32-2 Tutorial Session Room 401 MA Session Chair: Martin Hughes, Siemens Industrial Turbomachinery Ltd. Session Co-Chair: Weizhe Wang, Shanghai Jiao Tong University Session Chair: Luigi Carassale, University of Genova Session Co-Chair: Georges Jacquet, Insa Lab De Mecanique De Struc Session Chair: Grant Musgrove, Southwest Research Institute 8:00 Influence of Different Parametrizations on the Optimum Design of a High Pressure Turbine Blade Firtree GT Frank Wagner, Brandenburgische Technische Universität Cottbus-Senftenberg, Cottbus, Germany, Arnold Kuehhorn, Brandenburg University of Technology Cottbus-Senftenberg, Cottbus, Germany, Thomas Weiss, Rolls Royce Deutschland Ltd & Co. KG, Blakenfeld-Mahlow, Germany, Dierk Otto, Rolls- Royce Deutschland, Dahlewitz, Equatorial Guinea Effects of Contact Mistuning on Shrouded Blisk Dynamics GT Mainak Mitra, University of Michigan, Ann Arbor, Ann Arbor, MI, United States, Stefano Zucca, Politecnico Di Torino - DIMEAS, Torino, Italy, Bogdan Epureanu, University of Michigan, Ann Arbor, MI, United States T 8:30 9:00 9:30 Win Shaft Gas Turbine Variable Area Turbine Nozzle: Analytical Modeling and Optimization of Kinematic Chain GT Simone Colantoni, GE Oil & Gas, Florence, Italy, Girolamo Tripoli, GE Oil & Gas, Firenze, Italy, Devidasa Pai Gorte, GE Oil & Gas, Bangalore, India, Francesco Franchini, Fabio Rossetti, Marco Spagnolo, EnginSoft S.p.A, TRENTO, Italy Towards a Flexible Immersed Boundary Method for Fluid/Structure Interactions in Turbomachinery Applications GT Gianluca Iaccarino, Stanford University, Stanford, CA, United States, Sangjin Lee, Doosan Heavy Industries & Construction Co., Ltd., Soul, Korea (Republic), Jungchan Kim, Young Ho Ju, Doosan Heavy Industries & Construction Co., Ltd., Seoul, Korea (Republic) Numerical Simulation of Ice Shedding From a Spinning Cone by Using Coupled CZM and XFEM GT Liang Fu, Yong Chen, Man Xu, Shanghai Jiao Tong University, Shanghai, China, Xianhua Wu, Shanghai Jiaotong University, Shanghai, Shanghai, China, Wei Dong, Shanghai Jiao Tong University, Shanghai, China Vibration Absorbers for a Mistuned Bladed Disk GT Alok Sinha, Pennsylvania State Univ, University Park, PA, United States Reduced Order Models of Blisks With Small Geometric Mistuning GT Seunghun Baek, Yixin Zhao, Bogdan Epureanu, University of Michigan, Ann Arbor, MI, United States Reduced Order Models for Blisks With Small and Large Mistuning and Friction Dampers GT Weihan Tang, Seunghun Baek, Bogdan Epureanu, University of Michigan, Ann Arbor, MI, United States U T O R I A L FINAL PROGRAM 49

50 MONDAY, JUNE 13 8:00-10:00 AM TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY Casing Treatment Tip leakage flows II Cavities, Seals, Bearings Paper Session Room 403 MA-37-5 Paper Session Room 327 MA-38-4 Paper Session Room E1 MA Session Chair: Michael Hathaway, NASA Glenn Research Center Session Co-Chair: Christoph Brandstetter, Technische Universitat Session Chair: Alexander Wiedermann, MAN Diesel & Turbo SE Session Co-Chair: Milan Petrovic, University of Belgrade Session Chair: Chong M. Cha, Rolls-Royce Corporation 8:00 Difference in the Working Principle of Axial Slot and Tip Blowing Casing Treatments GT André Inzenhofer, Technische Universität München, Garching b. München, Bavaria, Germany, Andreas Hupfer, Technische Universität München, München, Germany, Bernd Becker, Patrick Grothe, Rolls-Royce Deutschland Ltd & Co KG, Blankenfelde-Mahlow, Germany, Frank Heinichen, Rolls-Royce-Germany,Blankenfelde-Mahlow, Germany, Cyril Guinet, Technische Universität München, Garching b. München, Bavaria, Germany Control of Tip Leakage in a High Pressure Turbine Cascade Using Tip Blowing GT Ralph Volino, United States Naval Academy, Annapolis, MD, United States Differential Equation-Based Specification of Turbulence Integral Length Scales for Cavity Flows GT Richard Jefferson-Loveday, The University of Nottingham, Nottingham, United Kingdom 8:30 Numerical Study on Effects of Axial-Slot Casing Treatment on Peak Efficiency of Axial Compressors GT Ning Ma, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, Beijing, China, Xi Nan, Institute of Engineering Thermophysics,, Beijing, China, Feng Lin, Institute of Engineering Thermophysics, Beijing, China Numerical Study of the Effect of Honeycomb Tip on Tip Leakage Flow in Turbine Cascade GT Yunfeng Fu, Fu Chen, Cong Chen, Yanping Song, Harbin Institute of Technology, Harbin, China Evaluation of a Volume of Fluid CFD Methodology for the Oil Film Thickness Estimation in an Aero-Engine Bearing Chamber GT Andrea Bristot, Herve Morvan, Kathy Simmons, University of Nottingham, Nottingham, United Kingdom 9:00 9:30 The Effects on Stability, Performance, and Tip Leakage Flow of Recirculating Casing Treatment in a Subsonic Axial Flow Compressor GT Wei Wang, Northwestern polytechnical university, Xi'an, Shannxi, China, WuLi Chu, Northwestern Polytechnical University, Xi an, Shanxi, China, HaoGuang zhang, Northwestern Ploytechnical University, Xi an, Shanxi, China, Yanhui Wu, Northwestern Polytechnical University, Xian, China Experimental and numerical investigation of effect of center offset degree on compressor stability with circumferential grooved casing treatment GT HaoGuang zhang, Northwestern Ploytechnical University, Xi'an, Shanxi, China, Feng Tan, Northwestern Polytechnical University, Xi an, Shaanxi, China, Yanhui Wu, Northwestern Polytechnical University, Xian, China, WuLi Chu, Northwestern Polytechnical University, Xi an, Shanxi, China, Wei Wang, Northwestern polytechnical university, Xi'an, Shannxi, China, Kang An, Northwestern Polytechnical University, Xi an, Shaanxi, China A Parametric and Computational Aerothermal Investigation of Squealer Tip Geometry in an Axial Turbine: A Parametric Approach Suitable for Future Advanced Tip Carving Optimizations GT Levent Kavurmacioglu, HIDIR MARAL, Cem B Senel, Istanbul Technical University, Istanbul, Turkey Experimental and Numerical Investigations on the Aerodynamic Performance of the Three-Stage Turbine With Consideration of the Leakage Flow Effect GT Yang Chen, Xi an Jiaotong University, Xi an,shannxi, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China, Chaoyang Tian, Dongfang Steam Turbine Co.,Ltd., Deyang, Deyang,Sichuan, China, Gangyun Zhong, Xiaoping Fan, Xianglin Kong, Dongfang steam Turbine Co.,Ltd, Deyang,Sicuan, Sicuan, China Numerical Analysis and Design Optimization of a Low Pressure Cylinder Control Valve Block of a High-Power Steam Turbine GT Liubov Arkhipova, Alexey Tyukhtyaev, Anton Bogachev, OJSC Power Machines, Saint Petersburg, Russia Numerical Simulation of the Flow in the Row Labyrinth Seal of an Axial Turbine Using a Low-Mach Preconditioning Technique GT Jens Fiedler, Anton Weber, German Aerospace Center (DLR), Cologne, Germany, Arianna Bosco, Karl Engel, MTU Aero Engines AG, Munich, Germany, Francesca di Mare, DLR, Köln, Germany 50 ASME 2016 TURBO EXPO

51 MONDAY, JUNE 13 8:00-10:00 AM TURBOMACHINERY: NOISE & INNOVATIVE NOISE REDUCTION (WITH AIRCRAFT ENGINE) WIND ENERGY Turbine and Combustor Noise Wind Turbine Blade Design Paper Session Room E4 MA-41-1 Session Chair: Andreas Peters, GE Aviation Session Co-Chair: Jean-Michel Lourier, General Electric Tutorial Session Room E6 MA-46-9 Session Chair: George Pechlivanoglou, HFI TU Berlin Session Co-Chair: Alessandro Bianchini, Univ of Florence 8:00 Experimental Study on the Turbomachinery Trailing Edge Noise Reduction GT Fan Tong, Northwestern Polytechnical University, Xi An, China, XunNian Wang, State Key Laboratory of Aerodynamics, China Aerodynamics Research and Development Center, Mianyang, China, Weiyang Qiao, Northwestern Polytechnical University, Xi an, China, Liang Ji, KunBo Xu, Northwestern Polytechnical University, Xi An, China Overview and Challenges of Modern Horizontal Axis Wind Turbine Blade Design GT George Pechlivanoglou, HFI TU Berlin, Berlin, Germany 8:30 Aerodynamic Performance and Acoustic Characteristics of Bionic Airfoil Inspired by Three-Dimensional Long- Eared Owl Wing Under Low Reynolds Number GT Dian Li, Xiaomin Liu, Xi'an Jiaotong University, Xi'an, Shaanxi, China Overview and Challenges of Modern Horizontal Axis Wind Turbine Blade Design GT George Pechlivanoglou, HFI TU Berlin, Berlin, Germany 9:00 Experimental Assessment of Noise Generation and Transmission in a High-Pressure Transonic Turbine Stage GT Karsten Knobloch, Lars Neuhaus, DLR, Berlin, Germany, Paolo Gaetani, Giacomo Persico, Politecnico Di Milano, Milano, Italy, Friedrich Bake, DLR, Berlin, Germany Review of the main aeroelastic modeling techniques for wind turbine blade simulation GT Joseph Saverin, Technische Universitat Berlin, Berlin, Germany 9:30 Acoustic Mode Analysis: Numerical and Experimental Results of a Turning Mid Turbine Frame GT Stefan Zerobin, Pascal Bader, Christian Faustmann, Andreas Marn, Emil Göttlich, Franz Heitmeir, Graz University of Technology, Graz, Austria Unsteady aerodynamics and their effect in wind turbine blade design and simulation GT Juliane Wendler, HFI / TU Berlin, Berlin, Germany FINAL PROGRAM 51

52 MONDAY, JUNE 13 2:30-5:30 PM AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS Innovative, Collaborative Aero-Engine Technologies for the Future Novel Combustion Concepts I Combustion Modeling: Combustor Simulations Panel Session Room 402 MB-1-14 Paper Session Room 317C MB-4-5 Paper Session Room E3 MB-4-25 Session Chair: Konstantinos Kyprianidis, Mälardalen University Session Chair: Adnan Eroglu, GE Session Co-Chair: Bernd Prade, Siemens AG KWU Session Chair: Alejandro Briones, University of Dayton Research Institute 2:30 3:00 Advanced Aero-Engines Technology Enablers: An Overview of the European Project E-Break GT Dr. Manuel Silva, Nicolas Tantot, Dr. Serge Selezneff, Michael Walsh, Dr. Rose Nyatando, Erik Johann, Thomas Klauke, Michele Coppola, Andre Kando ULTIMATE - Ultra Low emission Technology Innovations for Mid-century Aircraft Turbine Engines GT Tomas Grönstedt, Chalmers University, Gothenburg, Sweden Investigation of Ozone Stimulated Combustion in the SGT-800 Burner at Atmospheric Conditions GT Andreas Lantz, Siemens Industrial Turbomachinery AB, Finspong, Sweden, Andreas Ehn, Jiajian Zhu, Arman Ahamed Subash, Lund University, Lund, Sweden, Jenny Larfeldt, Siemens Industrial Turbomachinery AB, Finspong, Sweden, Elna J.K. Nilsson, Zhongshan Li, Marcus Aldén, Lund University, Lund, Sweden Influence of Combustor Geometry on Swirl Stabilized Premixed Methane-Air Flame GT Yiheng Tong, Mao Li, Lund University, Lund, Lund, Sweden, Jens Klingmann, Lund Universitet, Lund, Sweden Comparing Spray and Flame Behavior in a Swirl Liquid Fueled Lean Burner With Single and Multipoint Injections GT Maria Grazia De Giorgi, Aldebara Sciolti, Stefano Campilongo, Antonio Ficarella, Investigation of Fuel Distribution in Partially Premixed Swirled Burner With Pilot Flame GT Sergey S. Matveev, Ivan V. Chechet, Ivan A. Zubrilin, Mikhail Yu Orlov, Sergey G. Matveev, 3:30 Boundary-Layer Ingesting Fan Design for Next Generation Aircraft GT William Cousins, United Technologies Research Center, Glastonbury, CT, United States E-Class Late Fuel Staging Technology Delivers Flexibility Leap GT Carey E. Romoser, James Harper, GE, Greenville, SC, United States, Matthew Wilson, GE, Greer, SC, United States, Joseph Citeno, Mihir Lal, Derrick W. Simons, GE, Greenville, NC, United States Nonlinear Hydrodynamics of a Bluff-Body Stabilized Turbulent Premixed Flame GT Chin Yik Lee, Robert Stewart Cant, University of Cambridge, Cambridge, United Kingdom 4:00 4:30 Turbines and Structures for Ultra-High Pressure Ratio Aero-Engines GT Anders Lundbladh, Ralf VON DER BANK, Stefan Donnerhack, Anthony Rae, Mark Stokes, SEBASTIEN BOURGOIS, Oscar Caballero, Natalia Soldevilla, Richard Avellán,, Stefan Forsman, Wolfgang Sturm, Joris Versluis, Artur Ornat, Tomasz Mrugala, Lucjan Kraj, Innovation driven by environment GT Desvallees Yves, Safran-Snecma, Moissy-Cramayel Cedex, France Pilot-Pilot Interaction Effects on a Prototype DLE Gas Turbine Burner Combustion GT Atanu Kundu, Lund Universitet, SKANE, Sweden, Arman Ahamed Subash, Robert Collin, Lund University, Lund, Skane, Sweden, Jens Klingmann, Lund Universitet, Lund, Sweden Gaseous Fuel Flame Stabilization in a Modular Swirled Burner GT Ivan A. Zubrilin, Roman A. Zubrilin, Sergey S. Matveev, Sergey G. Matveev, SSAU, Samara, Russia Impact of Flame Stretch and Heat Loss on Heat Release Distributions in Gas Turbine Combustors: Model Comparison and Validation GT Noah Klarmann, Thomas Sattelmayer, Benjamin Timo Zoller, Weiqun Geng, Fulvio Magni, Investigation of Siemens SGT-800 Industrial Gas Turbine Combustor Using Different Combustion and Turbulence Models GT Daniel Lörstad, Anders Ljung, Abdallah Abou- Taouk, 5:00 Advanced Technology Development and Collaboration for the Future of Flight GT David Halstead, GE Aviation, Cincinnati, OH, United States GT Konstantinos Kyprianidis, Mälardalen University, Västerås, Sweden Development of Requirements for Numerical Modeling of the Premixer Aerodynamic GT Vladislav Nazukin, Aviadvigatel OJSC, Perm, Russia, Valery Avgustinovich, Perm National Research Polytechnic University, Perm, Russia Coupled CFD and Heat Transfer Analysis for a Small Scale Gas Turbine Combustor GT Altug Piskin, TUSAS Engine Industries, Inc., Eskisehir, Turkey, Ahmet Topal, TUSAS Engine Industries, Inc., Eskisehir, Turkey 52 ASME 2016 TURBO EXPO

53 MONDAY, JUNE 13 2:30-5:30 PM COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS CONTROLS, DIAGNOSTICS & INSTRUMENTATION ELECTRIC POWER Combustor Design & Development II Combustion Fundamentals Pressure Probes and Sensors IGCC Integrated Gasification Combined Cycle Paper Session Room 317C MB-4-12 Session Chair: Adnan Eroglu, GE Session Co-Chair: Bernd Prade, Siemens AG KWU Tutorial Session Room E6 MB-4-32 Session Chair: Mike Klassen, Combustion Science & Engineering Inc. Session Co-Chair: Tim Lieuwen, Georgia Institute of Technology Paper Session Room 308B MB-5-8 Session Organizer: Richard Bunce, Siemens Session Co-Chair: Peter Loftus, Rollsroyce Plc Tutorial Session Room 401 MB-8-5 Session Chair: Justin Zachary, Samsung 2:30 Investigation of Ozone Stimulated Combustion in the SGT-800 Burner at Atmospheric Conditions GT Andreas Lantz, Jenny Larfeldt Siemens Industrial Turbomachinery AB, Andreas Ehn, Jiajian Zhu, Arman Ahamed Subash, Elna J.K. Nilsson, Zhongshan Li, Marcus Aldén, Lund University Quasi 2D Flow-Adaptive Algorithm for Pneumatic Probe Measurements GT Christian Bartsch, Magnus Hölle, Peter Franz Jeschke, RWTH Aachen University, Aachen, Germany, Timo Metzler, MTU Aero Engines GmbH, Munich, Germany 3:00 Influence of Combustor Geometry on Swirl Stabilized Premixed Methane-Air Flame GT Yiheng Tong, Mao Li, Jens Klingmann, Lund University T U Evaluation of Measurement Uncertainties for Pneumatic Multi-Hole Probes Using a Monte Carlo Method GT Magnus Hölle, Christian Bartsch, Peter Franz Jeschke, RWTH Aachen University, Aachen, Germany T U 3:30 E-Class Late Fuel Staging Technology Delivers Flexibility Leap GT Christian Bartsch, Magnus Hölle, Peter Carey E. Romoser, James Harper, Matthew Wilson, Joseph Citeno, Mihir Lal, Derrick W. Simons, GE T O T O 4:00 Pilot-Pilot Interaction Effects on a Prototype DLE Gas Turbine Burner Combustion GT Atanu Kundu, Arman Ahamed Subash, Robert Collin, Jens Klingmann Lund Universitet R I Fast Settling Millimetre-Scale Five- Hole Probes GT Sam Grimshaw, University of Cambridge, Cambridge, United Kingdom, James V. Taylor, Whittle Laboratory, University of Cambridge, Cambridge, United Kingdom R I 4:30 5:00 Gaseous Fuel Flame Stabilization in a Modular Swirled Burner GT Ivan A. Zubrilin, Roman A. Zubrilin, Sergey S. Matveev, Sergey G. Matveev, SSAU Development of Requirements for Numerical Modeling of the Premixer Aerodynamic GT Vladislav Nazukin, Aviadvigatel OJSC, Valery Avgustinovich, Perm National Research Polytechnic University A L Development of a Fast Response Aerodynamic Pressure Probe Based on a Waveguide Approach GT Andrea Fioravanti, University of Florence, School of Engineering, Firenze, Italy, Giulio Lenzi, University of Florence, Florence, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fiorentino (FI), Italy A L FINAL PROGRAM 53

54 MONDAY, JUNE 13 2:30-5:30 PM HEAT TRANSFER: CONJUGATE HEAT TRANSFER HEAT TRANSFER: GENERAL HEAT TRANSFER HEAT TRANSFER: TUTORIALS Conjugate Analyses of Film Cooling/Internal Flows Gas Path Heat Transfer Heat Transfer Tutorials II Paper Session Room 307A MB-10-2 Paper Session Room 307B MB-13-1 Tutorial Session Room 301 MB-14-2 Session Organizer: Phil Ligrani, University of Alabama In Huntsville Session Co-Organizer: Jing Ren, Tsinghua University Session Organizer: Hee-Koo Moon, Solar Turbines Inc Session Co-Organizer: Changmin Son, Pusan National University Session Organizer: Bijay K. Sultanian, Takaniki Communications, LLC 2:30 Impingement/Effusion Cooling Wall Heat Transfer: Conjugate Heat Transfer Computational Fluid Dynamic GT Gordon E. Andrews, Univeristy of Leeds, Leeds, United Kingdom, Abubakar El-Jummah, University of Maiduguri, Maduguri, Nigeria, John Staggs, University of Leeds, Leeds, United Kingdom Numerical and Experimental Investigation of Aerodynamics on Flow Around a Highly Loaded Low-Pressure Turbine Blade With Flow Separation Under Steady and Periodic Unsteady Inlet Flow Condition GT Ali Nikparto, Texas A&M University, College Station, TX, United States, Meinhard T. Schobeiri, Texas A & M University, College Station, TX, United States Tutorial: Conjugate Heat Transfer GT Atul Kohli, Pratt & Whitney, Tolland, CT, United States 3:00 Impingement Jet Cooling With Ribs and Pin Fin Obstacles in Co-Flow Configurations: Conjugate Heat Transfer Computational Fluid Dynamic Predictions GT Gordon E. Andrews, Univeristy of Leeds, Leeds, United Kingdom, Abubakar El-Jummah, University of Maiduguri, Maduguri, Nigeria, John Staggs, University of Leeds, Leeds, United Kingdom Aero-Thermal Performance of a Nozzle Vane Cascade With a Generic Non Uniform Inlet Flow Condition: Part I Influence of Non Uniformity Location GT Antonio Perdichizzi, Hamed Abdeh, University Of Bergamo, Dalmine (BG), Italy, Giovanna Barigozzi, Universita Di Bergamo, Dalmine, Italy, Marc Henze, Joerg Krueckels, Ansaldo Energia Switzerland Ltd., Baden, AG, Switzerland Tutorial: Numerical Internal Cooling GT Domenico Borello, Università di Roma Sapienza, Rome, Italy 3:30 4:00 4:30 Overall Cooling Effectiveness on a Flat Plate With Both Film Cooling and Impingement Cooling in Hot Gas Condition GT Bo Shi, Jia Li, Mingfei Li, Jing Ren, Hongde Jiang, Tsinghua University, Beijing, China Conjugate Heat Transfer Analysis for Laminated Cooling Effectiveness: Part A Effects of Surface Curvature GT Weilun ZHOU, Institute of Turbomachinery, Xi'an JiaoTong University, Xi an, Shaanxi Province, China, Qinghua DENG, Institute of Turbomachinery, Xi an Jiaotong University, Xi an, Shaanxi Province, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China Aero-Thermal Performance of a Nozzle Vane Cascade With a Generic Non Uniform Inlet Flow Condition: Part II Influence of Purge and Film Cooling Injection GT Giovanna Barigozzi, Universita Di Bergamo, Dalmine, Italy, Hamed Abdeh, Antonio Perdichizzi, University of Bergamo, Dalmine (BG), Italy, Marc Henze, Joerg Krueckels, Ansaldo Energia Switzerland Ltd., Baden, AG, Switzerland Temperature Effects on Nozzle Guide Vane Deposition in a New Turbine Cascade Rig GT Ryan Lundgreen, The Ohio State University, Columbus, OH, United States, Craig Sacco, Ohio State University, Columbus, OH, United States, Robin Prenter, The Ohio State University, Columbus, OH, United States, Jeffrey Bons, Ohio State Univ, Columbus, OH, United States Experimental Characterization of the Vane Heat Flux Under Pulsating Trailing-Edge Blowing GT Jorge Saavedra, Guillermo Paniagua, Purdue University, West Lafayette, IN, United States, Bayindir H. Saracoglu, Von Karman Institute For Fluid Dynamics, Rhode-saint-Genese, Belgium Tutorial: Numerical Film Cooling GT Malak Malak, Honeywell International, Phoenix, AZ, United States Tutorial - Structures GT Thomas Weiss, Rolls Royce Deutschland Ltd & Co. KG, Blakenfeld-Mahlow, Germany Tutorial - General Heat Transfer GT James P. Downs, Florida Turbine Technology, Inc., Jupiter, FL, United States 5:00 Conjugate Heat Transfer Analysis for Laminated Cooling Effectiveness: Part B Effects of Film Hole Incline Angle GT Qinghua DENG,Weilun ZHOU, Zhenping Feng, Computational and Experimental Studies of Midpassage Gap Leakage and Misalignment for a Non-Axisymmetric Contoured Turbine Blade Endwall GT Eric Lange, Stephen Lynch, Penn State University, University Park, PA, United States, Scott Lewis, Pratt & Whitney, East Hartford, CT, United States 54 ASME 2016 TURBO EXPO

55 MONDAY, JUNE 13 2:30-5:30 PM INDUSTRIAL & COGENERATION MANUFACTURING MATERIALS & METALLURGY MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES Cogeneration, CHP Application, Waste Heat Recovery Additive Manufacturing - 3D Printing Turbochargers - Compressors & Turbines Paper Session Room 318A MB-20-3 Paper Session Room 317B MB-21-1 Paper Session Room 327 MB-23-9 Session Chair: Mauro Venturini, Università degli Studi di Ferrara Session Co-Chair: Maria Alessandra Ancona, University of Bologna Session Chair: Yong Yang, General Electric Session Co-Chair: Ingomar Kelbassa, Siemens AG, Berlin Session Chair: Apostolos Pesiridis, Brunel University London 2:30 Performance Simulation of 3-Stage Gas Turbine CHP Plant for Marine Applications GT Yiguang Li, Cranfield University, Bedford Mk43 0al, United Kingdom, Zhitao Wang, Shuying Li, Harbin Engineering University, Harbin, China Reheat Burner Front Panel Produced by Additive Manufacturing Challenges: Strategies and Engine Validation GT Michael Maurer, Patricia Sierra, Patrik Meng, Ansaldo Energia Switzerland Ltd., Baden, Switzerland Circumferential Flow Differences in the Double-Sided Centrifugal Compressor WithNon-Balanced Inlets GT Ce Yang, Yixiong Liu, Wangxia Wu, Beijing Institute of Technology, Beijing, China, Lei Jing, Beijing Institute of Technology, , China, Benjiang Wang, Shan Chen, Beijing Institute of Technology, Beijing, China 3:00 Investigation of Different Operation Strategies to Provide Balance Energy With an Industrial CHP Plant Using Dynamic Simulation GT Steffen Kahlert, Technische Universität München, Garching b. München, Bavaria, Germany, Hartmut Spliethoff, Technische Universitaet Muenchen / ZAE Bayern, Garching bei Muenchen, Bavaria, Germany Additive Manufacturing of Hot Gas Path Parts and Engine Validation in a Heavy Duty GT GT Julius Schurb, GE Power, Birr, Switzerland, Thomas Etter, Laura Bogdanic, GE Power, Baden, Switzerland, Matthias Hoebel, GE Power, Birr, Switzerland, Hartmut Haehnle, Harald Peter Kissel, GE Power, Baden, Switzerland Investigation on the Performance and Flow Structure of Centrifugal Compressor: Understand the Inlet Bent Duct Configurations GT Ce Yang, Yixiong Liu, Beijing Institute of Technology, Beijing, China, LeiLei Wang, Hebei University Of Engineering, Handan, China, Dazhong Lao, Changmao Yang, Beijing Institute of Technology, Beijing, China 3:30 Evaluation of Performance Robustness of a Gas Turbine Cogeneration Plant- Based on a Mixed-Integer Linear Model GT Ryohei Yokoyama, Ryo Nakamura, Tetsuya Wakui, Osaka Prefecture University, Sakai, Osaka, Japan, Yuji Shinano, Zuse Institute Berlin, Berlin, Germany Characterization of LAM-Fabricated Porous Superalloys for Turbine Components GT Brandon Ealy, Luisana Calderon, Wenping Wang, Ranier Valentin, Ilya Mingareev, Martin Richardson, Jay Kapat Acoustic Measurements From an Automotive Centrifugal Compressor With a Switchable Dual-Port Casing Treatment for Extended Operating Range GT Rick Dehner, Ahmet Selamet, Michael Steiger, Harold Sun, Dave Hanna, Liangjun Hu, 4:00 Development and Performance Measurements of a Beta-Type Free-Piston Stirling Engine Along With Dynamic Model Predictions GT Kyuho Sim, Dong-Jun Kim, Seoul National University of Science and Technology, Seoul, Korea (Republic) Developing Additive Manufacturing Technology for Burner Repair GT Olov Andersson, Siemens Industrial Turbomachinery, Finspong, Sweden, Vladimir Navrotsky, Siemens, Finspong, Sweden, Håkan Brodin, Siemens Industrial Turbomachinery, Finspång, Sweden, Andreas Graichen, Siemens Industrial Turbomachinery, Finspong, Sweden Numerical Optimization and Manufacturing of the Impeller of a Centrifugal Compressor by Variation of Splitter Blades GT S.Abolfazl Moussavi Torshizi, Sharif University of technology, Tehran, Iran, Ali Hajilouy-Benisi, Sharif Univ Of Technology, Tehran, Iran, Mohammad Durali, Sharif University of Technology, Tehran, Iran 4:30 5:00 Cogenerative Performance of a Wind Gas Turbine Organic Rankine Cycle Integrated System for Offshore Applications GT Valentina Orlandini, Michele Bianchi, Lisa Branchini, Andrea De Pascale, Fredrik Haglind, Francesco Melino, Antonio Peretto, Leonardo Pierobon Establishment of a Competitive Additive Manufacturing Workshop GT Paul Ryan, Jan Schwerdtfeger, Markus Rodermann, General Electric Switzerland GmbH, Birr, Switzerland Investigation of Cross Flow in Double Entry Turbocharger Turbines GT Dominik Lückmann, FEV GmbH, Aachen, Germany, Max Stadermann, Stefan Pischinger, Institute for Combustion Engines, RWTH Aachen University, Aachen, Germany, Richard Aymanns, FEV GmbH, Aachen, Germany FINAL PROGRAM 55

56 MONDAY, JUNE 13 2:30-5:30 PM OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: EMERGING METHODS IN DESIGN & ENGINEERING Compressor Fouling Mechanisms and Modeling Steam Turbine Design and Operational Aspects Experimental Test and Evaluation Tutorial Session Room 317A MB Paper Session Room E2 MB-26-8 Paper Session Room 300 MB-27-2 Session Chair: Michele Pinelli, University of Ferrara Session Co-Chair: Klaus Brun, Southwest Research Institute, Rainer Kurz, Solar Turbines Incorporated Session Chair: Peter Stein, GE Power Session Co-Chair: Xianhong Wu, PCA Engineers Ltd Session Chair: Partha Das, PSM, Ansaldo Energia Group Session Co-Chair: Bernd Beirow, Brandenburg University of Technology Cottbus 2:30 Setup, Validation and Probabilistic Robustness Estimation of a Model for Prediction of LCF in Steam Turbine Rotors GT David Pusch, Peter Dumstorff, Henning Almstedt, Matthias Voigt, Konrad Vogeler Experimental Investigation of Fluid Structure Interaction of Impeller Like Disks in super critical carbon dioxide GT Hajo Pereboom, Pieter Van Beek, TNO, Delft, Netherlands, Johannes Smeulers, TNO Science And Industry, Delft, Netherlands 5:00 4:30 4:00 3:30 3:00 T U T O R I A L Thermal modelling of an intermediate pressure steam turbine by means of conjugate heat transfer - simulation and validation GT Dominik Born, Peter Stein, Gabriel Marinescu, GE Power, Baden, Switzerland, Stefan Koch, Daniel Schumacher, ZHAW, Winterthur, Switzerland Statistical Evaluation of the Performance Impact of Manufacturing Variations for Steam Turbines GT Juntao Xiong, Jing Yang, Ivan Mcbean, Said Havakechian, Feng Liu The Exergy Optimization Analysis of 700 HUSC Steam Turbine Using a Echelon Cycle System GT Xiaolan Yi, Shiwang Fan, Haitao Li, Jiandao Yang, Tao Chen, Hong Yang Thermodynamic Analysis of Supercritical and Subcritical Rankine Cycles GT Martín Salazar-Pereyra, Raúl Lugo-Leyte, Angélica Elizabeth Bonilla-Blancas, Helen Lugo-Méndez Fault Diagnosis on an Aircraft Engine Model Equipped With Self-Sensing Piezoelectric Actuators GT Ramakrishnan Ambur, Xiaonan Zhao, Stephan Rinderknecht, Technische Universität Darmstadt, Darmstadt, Germany Investigation of Shock-Wave/Boundary-Layer Interaction on Aeroelastic Stability: Towards Active Control GT Quentin Rendu, Yannick Rozenberg, Universite Claude Bernard Lyon 1, Villeurbanne, France, Stephane AUBERT, Pascal Ferrand, Ecole Centrale De Lyon, Ecully, OO, France Investigation on the Turbine Blade Tip Clearance Monitoring Based on Eddy Current Pulse-Trigger Method GT Weimin Wang, Huajin SHAO, Lifang CHEN, Huibin Song, Beijing University of Chemical Technology, Beijing, China NovaLT16 Bearing #2 Oil System Design: Test Rig Architecture, Functional Tests and Design Challenges GT Manfredi Mazzola, Paolo Di Sisto, Andrea Signori, Silvia Evangelisti 56 ASME 2016 TURBO EXPO

57 MONDAY, JUNE 13 2:30-5:30 PM STRUCTURES & DYNAMICS: ROTORDYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING SUPERCRITICAL CO2 POWER CYCLES Rotordynamic Analysis I Dynamics of Bladed Disks with Nonlinearities sco2 Compressors Paper Session Room 307C MB-30-1 Paper Session Room 308A MB-32-5 Paper Session Room 308C MB-36-2 Session Chair: Daniel Lubell, Oil-Free Machinery, Yorba Session Co-Chair: Aaron Rimpel, Southwest Research Institute Session Chair: Fabrice Thouverez, Ecole Centrale de Lyon Session Co-Chair: Kiran D souza, The Ohio State University Session Chair: Tim Allison, Southwest Research Institute Session Co-Chair: Sarah Simons, Southwest Research Institute 2:30 3:00 3:30 4:00 4:30 Periodicity and Stability in Transverse Motion of a Nonlinear Rotor-Bearing System Using Generalized Harmonic Balance Method GT Zhi wei Liu, Yuefang Wang, Dalian University of Technology, Dalian, Liaoning Province, China Including Housing-Casing Fluid in a Lateral Rotordynamics Analysis on Electric Submersible Pumps GT Dara Childs, Texas A & M Univ, College Station, TX, United States, Clay Norrbin, Texas A&M Turbomachinery Lab, College Station, TX, United States, Stephen Phillips, Texas A&M Turbomachinery Lab, Bryan, TX, United States Rotordynamic Modeling of a Rotor on a Flexible Support Structure Utilizing Solid Element Modeling and Support Transfer Functions GT Lingnan Hu, Alan Palazzolo, Texas A&M University, College Station, TX, United States Torsional Robustness of the Combined Cycle Power Train Arrangement: Application of Statistical Methods to Accelerate Shaft-Line Design Cycles GT Mateusz Golebiowski, John Ling, Eric Knopf, Andreas Niedermeyer, General Electric (Switzerland) GmbH, Baden, Switzerland An Analytical Model of Flow-Induced Rotordynamic Forces in Shrouded Centrifugal Pump Impellers GT Jieun Song, Seoul National University, Seoul, Korea (Republic), Seung Jin Song, Seoul National University, Seoul , Kor A Fractal Contact Friction Model and Nonlinear Vibration Response Studies of Loosely Assembled Blade With Dovetail Root GT Shangguan Bo, Yu Feilong, Duan Jingyao, Gao Song, Xiao Junfeng, Zili Xu A Multi-Scale Approach for Nonlinear Dynamic Response Predictions With Fretting Wear GT Jason Armand, Luca Pesaresi, Imperial College London, London, United Kingdom, Loic Salles, Christoph Schwingshackl, Imperial college, London, United Kingdom A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed GT Torsten Heinze, Lars Panning-von Scheidt, Joerg Wallaschek, Institute of Dynamics and Vibration Research, Leibniz Universität Hannover, Hannover, Germany, Dr. Andreas Hartung, MTU Aero Engines AG, München, Germany Stability Analysis of Multiharmonic Nonlinear Vibrations for Large Models of Gas-Turbine Engine Structures With Friction and Gaps GT Evgeny Petrov, Sussex University, Brighton, United Kingdom Liquid CO2 Formation, Impact, and Mitigation at the Inlet to a Supercritical CO2 Compressor GT Melissa Poerner, Grant Musgrove, Griffin Beck, Southwest Research Institute, San Antonio, TX, United States Design Parameters Exploration for Supercritical CO2 Centrifugal Compressors Under Multiple Constraints GT Wenyang Shao, Xiaofang Wang, Dalian University of Technology, Dalian, Liaoning, China, Jinguang Yang, Dalian University of Technology, Dlian, Liaoning, China, Huimin Liu, Zhenjun Huang, Shanghai Micropowers Co., Shanghai, Shanghai, China Feasibility of a Direct Coupled Turbine-Compressor Power Block for S-CO2 Brayton Cycles GT Eshan Dhar, Indian Institute of Science, Bangalore, Karnataka, India, Shreyas Srivatsa, University of Maryland, College Park, College Park, MD, United States, Pramod Kumar, Indian Institute of Science, Karnataka, India Sensitivity Study of S-CO2 Compressor Design for Different Real Gas Approximations GT JEKYOUNG LEE, Seong Kuk Cho, KAIST, Daejeon, Korea (Republic), Jae Eun Cha, KAERI, Daejeon-City, Korea (Republic), Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic) 5:00 Analysis of the Dynamic Behavior of Two High-Pressure Turbines for the Possible Detection of Rub Symptoms GT Filippo Cangioli, Paolo Pennacchi, Andrea Vania, Steven Chatterton,, Phuoc Vinh Dang Improved Hybrid Frequency-Time Domain Method for Nonlinear Analysis of Frictionally Damped Blade Systems GT Yalin Liu, Shangguan Bo, Zili Xu Numerical Investigation of the Flow Behavior Inside a Supercritical CO2 Centrifugal Compressor GT Alireza Ameli, Teemu Turunen-Saaresti, Jari Backman, Lappeenranta University of Technology, Lappeenranta, Finland FINAL PROGRAM 57

58 MONDAY, JUNE 13 2:30-5:30 PM TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS Inlet Distortion Effects Cascade Studies Cavity Flows Paper Session Room 403 MB-37-2 Paper Session Room 318B MB Paper Session Room E4 MB Session Chair: Alessandro Corsini, Sapienza University of Rome Session Co-Chair: David Volponi, Sapienza University of Rome Session Chair: Kwang-yong Kim, Inha Univ Session Co-Chair: Abdus Samad, IIT Session Chair: Sergio Lavagnoli, Von Karman Inst for Fluid Dynamics Session Co-Chair: Jose Maria Rey Villazon, GE Aviation 2:30 Investigation of Engine Distortion Interaction GT Fabian Wartzek, Heinz-Peter Schiffer, Jakob Haug, Reinhard Niehuis, Martin Bitter, Christian Kähler Effects of a Skewed Inlet Boundary Layer on the Aerodynamic Performance of a Stator-Hub Equivalent High-Turning Compressor Cascade GT Christoph Bode, Jörg Hoffmann, Udo Stark The Investigations of the Balance Hole Area and Radial Seal Clearance's Influences on Turbine Efficiency in the Wheel Chamber GT Guoliang Deng, Qi Sun, Shan Wang, Chaoyang Tian, Qi Wu, Xiaodan Zhang, Xiaoqin Du 3:00 Efficient Modeling Strategy of an Axial Compressor Fan-Stage Under Inlet Distortion GT Bryan Lobo, ANSYS Software Pvt. Ltd., Pune, Maharashtra, India, Laith Zori, ANSYS Inc., Lebanon, NH, United States, Paul Galpin, AN- SYS Canada Ltd, Waterloo, ON, Canada, Bill Holmes, ANSYS, Waterloo, ON, Canada Effects of Turbulent Boundary Conditions on the Prediction of the Secondary Flow Field in a Linear Compressor Cascade GT Peter Busse, Andreas Krug, Martin Lange, TU Dresden, Dresden, Germany, Konrad Vogeler, Ronald Mailach, Technische Universität Dresden, Dresden, Germany Experimental and Numerical Investigation of Unsteady Structures Within the Rim Seal Cavity in the Presence of Purge Mass Flow GT Cengiz Camci, Penn State University, University Park, PA, United States, Jason Town, Michael Averbach, The Pennsylvania State University, University Park, PA, United States 3:30 Effects of Total Pressure Inlet Distortion on Transonic Fan Blade Wake Properties GT Anthony Ferrar, University of Florida, Gainesville, FL, United States, William C. Schneck, III, Alfred Wicks, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States, Walter O Brien, Virginia Tech University, Blacksburg, VA, United States Investigation on Pitch-Wise Non-Uniform and Inflecting Inlet Flow of Low-Speed Plane Cascade GT Xingxu XUE, Xun Zhou, Harbin Institute of Technology, Harbin, Heilongjiang, China, Xun Liu, Department of gas turbine, No.703 research institute of CSIC, Harbin, Heilongjiang, China, Fengbo Wen, Harbin Institute of Technology, Harbin, China Influence of a Shroud Axisymmetric Slot Injection on a High Pressure Turbine Flow GT Etienne Tang, Turbomeca, Bordes, France, Isabelle Trebinjac, LMFA - Ecole Centrale de Lyon, Ecully, France, Ghislaine Ngo Boum, Ecole Centrale de Lyon-LMFA, Ecully, France, Gilles Leroy, Turbomeca, Bordes Cedex, France, Mickael Philit, Turbomeca, Bordes, France 4:00 4:30 Analysis of Fan Stage Design Attributes for Boundary Layer Ingestion GT David K. Hall, E.M. Greitzer, C.S. Tan, Massachusetts Institute of Technology, Cambridge, MA, United States Fan Performance Scaling With Inlet Distortions GT Jeff Defoe, University of Windsor, Windsor, ON, Canada, David K. Hall, Massachusetts Institute of Technology, Cambridge, MA, United States Numerical Investigation of Intermittent Corner Separation in a Linear Compressor Cascade GT Wei Ma, Shanghai Jiao Tong University, Shanghai, China, Feng Gao, University of Surrey, Guildford, United Kingdom, Xavier Ottavy, CNRS - LMFA, Ecully, France, Lipeng Lu, Beihang University, Beijing, Beijing, China, Anjenq Wang, Shanghai Jiao Tong University, Shanghai, China Modulation and Radial Migration of Turbine Hub Cavity Modes by the Rim Seal Purge Flow GT Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari, Gregor Schmid, Stefan Völker High-Pressure Turbine Rim Seal Design for Increased Efficiency GT Martin Chilla, Howard Hodson, Graham Pullan, David Newman 5:00 Effects of Circumferential Inlet Distortion on the Performance of a Transonic Fan Together With the Impact of Tip Injection GT Hossein Khaleghi, Reza Jalaly, Amirkabir University of Technology, Tehran, Iran Detailed Investigation of RANS and LES Predictions of Loss Generation in an Axial Compressor Cascade at Off Design Incidences GT John Leggett, Stephan Priebe, Richard D. Sandberg, Aamir Shabbir, Vittorio Michelassi Experimental Investigation of Turbine Stage Flow Field and Performance at Varying Cavity Purge Rates and Operating Speeds GT Johan Dahlqvist, Royal Institute of Technology, Stockholm, Sweden, Jens Fridh, KTH Royal Institute of Technology, Stockholm, Sweden 58 ASME 2016 TURBO EXPO

59 MONDAY, JUNE 13 2:30-5:30 PM TURBOMACHINERY: DUCTS & COMPONENT INTERACTIONS TURBOMACHINERY: MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION & UNCERTAINTY QUANTIFICATION WIND ENERGY HONORS AND AWARDS Gas Turbine Engine Component and Flow Interactions Turbine Design and Cooling Introduction to Wind Energy 2016 Aircraft Engine Technology Award Lecture Paper Session Room E1 MB-40-3 Paper Session Room 318C MB-45-4 Tutorial Session Grand Ballroom MB-46-8 Session Chair: Ndaona Chokani, ETH Zurich Lecture Session Room 301 MB-48-1 Session Chair: Berardo Paradiso, Politecnico di Milano Session Co-Chair: Mauro Carnevale, Asad Asghar, Davide Lengani Session Chair: Shahrokh Shahpar, Rolls- Royce plc. Session Co-Chair: Francesco Montomoli, Imperial College London Session Chair: Andrew Nix, West Virginia University, Morgantown 2:30 Investigation of Penny Leakage Flows of Variable Guide Vanes in High Pressure Compressors GT Hannes Wolf, Matthias Franke, MTU Aero Engines AG, Munich, Germany, Alexander Halcoussis, MTU Aero Engine AG, Munich, Germany, Christophe Kleinclaus, Sebastien Gautier, Exa GmbH, Munich, Germany Robust Optimization of the HPT Blade Cooling and Aerodynamic Efficiency GT Kirill Vinogradov, Gennady Kretinin, Kseniya Otryahina, Roman Didenko, Dmitriy Karelin, Yury Shmotin, NPO Saturn, Rybinsk, Russia Turbine Blade Cooling Research at Texas A&M GT JC Han, Texas A & M University 3:00 3:30 4:00 Automated Multi-Code URANS Simulation of Compressor-Combustor Components GT Karpaga Vipran Kannan, Gary J. Page, Loughborough University, Loughborough, United Kingdom Design of an Intermediate Turbine Duct Downstream of a High Pressure Turbine GT Chaoshan Hou, Hu Wu, Northwestern Polytechnical University, Xi an, China Optimized Aerodynamic Design of Aggressive Intermediate Turbine Duct With Strut Fairings Using Genetic Algorithms GT Chen Yang, Northwestern Polytechnical University, Xi'an, shaanxi, China, Hu Wu, Northwestern Polytechnical University, Xi an, Shaan xi, China Multi-Objective Optimization of the Impingement-Film Cooling Structure of a HPT Endwall Using Conjugate Heat Transfer CFD GT Zhongran Chi, Shanghai Jiao Tong University, Shanghai, Shanghai, China, Haiqing Liu, Shanghai Advanced Research Institute, Shanghai, China, Shusheng Zang, SHANGHAI JIAO TONG UNI- VERSITY,CHINA, SHANGHAI, China A Bi-Fidelity Approach for Uncertainty Quantification of Heat Transfer in a Rectangular Ribbed Channel GT Alireza Doostan, University of Colorado Boulder, Boulder, CO, United States, Gianluca Geraci, Gianluca Iaccarino, Stanford University, Stanford, CA, United States Adjoint Based Unsteady Aerodynamic Optimization of a Transonic Turbine Stage GT Can Ma, Xinrong Su, Tsinghua University, Beijing, China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China T U T O R I 4:30 Minimisation of Ducted Flow Non-Uniformity Caused by Downstream Blockages GT Max Rife, Fernando Barbarossa, Anthony Parry, Jeffrey S. Green, Luca Di Mare FLOvane: A New Approach for HP Vane Design GT Dingxi Wang, Francesco Ornano, Y.S. Li, Roger G. Wells, Christer Hjalmarsson, Lars Hedlund, Thomas Povey A L 5:00 Numerical Research on the Mixing Mechanism of Lobed Mixer With New De-Swirling Structure GT Zhijun Lei, Jianbo Gong, Yanfeng Zhang, Shangmei Su, Chunyan Hu, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China Optimal Arrangement of the Film Cooling Holes Considering the Manufacturing Tolerance for High Pressure Turbine Nozzle GT Sanga Lee, Dong-Ho Rhee, Kwanjung Yee, FINAL PROGRAM 59

60 TUESDAY, JUNE 14 9:00-10:30 AM AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS Conceptual Design and Optimization Chemical Kinetics Combustion Noise Paper Session Room E4 TA-1-11 Paper Session Room E3 TA-4-13 Paper Session Room 317C TA-4-14 Session Chair: Harald Funke, FH Aachen University of Applied Sciences Session Co-Chair: Wilfried Visser, Delft University of Technology Oscar Kogenhop, National Aerospace Laboratory NLR Session Chair: Subith Vasu, University of Central Florida Session Co-Chair: Chitralkumar Naik, AN- SYS Inc. Session Chair: Thomas Sattelmayer, Technical Univ Munich, Garching Session Co-Chair: Moritz Schulze, Technische Universitaet Muenchen 9:00 Optimizing Separate Exhaust Turbofans for Cruise Specific Fuel Consumption GT Syed Khalid, Gas Turbine Systems Solutions, LLC, Palm Beach Gardens, FL, United States Evaluation of Kinetic Mechanisms for Direct Fired Supercritical Oxy-Combustion of Natural Gas GT Shane Coogan, Southwest Research Institute, San Antonio, TX, United States, Xiang Gao, Georgia Institute of Technology, Atlanta, GA, United States, Aaron McClung, Southwest Research Institute, San Antonio, TX, United States, Wenting Sun, Georgia Institute of Technology, Atlanta, GA, United States Broadband Combustion Noise Simulation of the PRECCINSTA Burner Based on Stochastic Sound Sources GT Felix Grimm, German Aerospace Center (DLR), Stuttgart, Germany, Duncan Ohno, German Aerospace Center / University of Stuttgart, Stuttgart, Germany, Roland Ewert, Juergen Dierke, German Aerospace Center (DLR), Braunschweig, Germany, Berthold Noll, DLR, Stuttgart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technology, Stuttgart, Germany 9:30 Preliminary Design and Performance of Counter Rotating Turbines for Open Rotors: Part I: 1-D Methodology GT Pablo Bellocq, TOTAL, Pau, France, Iñaki Garmendia, Mechanical Engineering Department, University of the Basque Country UPV/ EHU, San Sebastián, Gipuzcoa, Spain, Jordane Legrand, Solar Turbines, Gosselies, Belgium, Vishal Sethi, Cranfield University, Cranfield, United Kingdom Chemical Kinetic Models for Enhancing Gas Turbine Flexibility: Model Validationand Application GT Felix Guethe, General Electric Power, CH-5401 Baden, Switzerland, Martin Gassner, Stefano Bernero, Thiemo Meeuwissen, Torsten Wind, GE Power, Baden, Switzerland Analysis of Combustion Noise Using Locally Resolved Density Fluctuations and a Microphone Array GT Johannes Peterleithner, Stefan Zerobin, Jakob Woisetschlaeger, Graz University of Technology, Graz, Austria 10:00 Preliminary Design and Performance of Counter Rotating Turbines for Open Rotors: Part II: D Methodology and Case Study for a 160 PAX Aircraft GT Pablo Bellocq, TOTAL, Pau, France, Iñaki Garmendia, Mechanical Engineering Department, University of the Basque Country UPV/ EHU, San Sebastián, Gipuzcoa, Spain, Jordane Legrand, Solar Turbines, Gosselies, Belgium, Vishal Sethi, Cranfield University, Cranfield, United Kingdom A Kinetics Model For The Shockless Explosion Combustion GT Phillip Berndt, Freie Universität Berlin, 14195, Germany, Rupert Klein, Freie Universität Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany Experimental and Numerical Investigation of Direct and Indirect Combustion Noise Contributions in a Lean Premixed Laboratory Swirled Combustor GT Nancy Kings, Wenjie Tao, Philippe Scouflaire, EM2C, CNRS and CentraleSupelec, Chatenay Malabry, France, Franck Richecoeur, EM2C, CNRS and CentraleSupelec, Chatenay-Malabry, France, Sebastien Ducruix, CNRS & CentraleSupelec, Chatenay Malabry, France 60 ASME 2016 TURBO EXPO

61 TUESDAY, JUNE 14 9:00-10:30 AM CONTROLS, DIAGNOSTICS & INSTRUMENTATION CYCLE INNOVATIONS HEAT TRANSFER: CONJUGATE HEAT TRANSFER Artificial Intelligence and Neural Network Diagnostic Approaches Fuel Cell Driven Cycles Conjugate Analyses of Cooled Airfoils Paper Session Room 308B TA-5-6 Paper Session Room 317A TA-6-1 Paper Session Room 301 TA-10-1 Session Organizer: Pierre Dewallef, University of Liege Session Co-Organizer: Syed Khalid, Gas Turbine Systems Solutions, LLC Session Chair: Mario Luigi Ferrari, University of Genoa Session Co-Chair: Lawrence Shadle, National Energy Technology Laboratory - U.S. DOE Session Organizer: Atul Kohli, Pratt & Whitney, Tolland Session Co-Organizer: Sung in Kim, Queen s University Belfast 9:00 Application of Artificial Neural Networks for Misfiring Detection in an Annular Pulsed Detonation Combustor Mockup GT Sascha Wolff, Technische Universitaet Berlin, Berlin, Germany, Jan Schaepel, Chair of Measurement and Control, Berlin, Germany, Rudibert King, Technische Universität Berlin, Berlin, Germany Study on Nonlinear Identification SOFC Temperature Model Based on Particle Swarm Optimization-Least Squares Support Vector Regression GT Jinwei Chen, Shanghai Jiao Tong University, Shanghai, China, Huisheng Zhang, Shanghai Jiao Tong Univ, Shanghai, China, Shilie Weng, Shanghai Jiao Tong University, Shanghai, China Conjugate Heat Transfer Simulation of the Intercooled Compressor Vanes Based on Discontinuous Galerkin Method GT Longgang Liu, Chunwei Gu, Xiaodong Ren, Tsinghua University, Beijing, China 9:30 Power Setting Sensor Fault Detection and Accommodation for Gas Turbine Engines Using Artificial Neural Networks GT Yiguang Li, Cranfield University, Bedford Mk43 0al, United Kingdom, Adrien Courdier, Cranfield University, Cranfield, Bedfordshire, United Kingdom Dynamic Analysis of a Recuperated GT Cycle for Fuel Cell Hybrid Systems GT Luca Larosa, University of Genoa, Genoa, Italy, Alberto Traverso, Univ Of Genova, Genova 16145, Italy, Aristide Massardo, Univ Of Genoa, Genova, Italy Multi-Disciplinary Analyses for the Design of a High Pressure Turbine Blade Tip GT Stefano Caloni, Rolls-Royce plc, Derby, United Kingdom, Shahrokh Shahpar, Rolls-Royce plc., Derby, United Kingdom 10:00 Rotating Machinery Monitoring and Fault Diagnosis With Neural Network Enhanced Fuzzy Logic Expert System GT Xiaojun Li, Alan Palazzolo, Texas A&m University, COLLEGE STATION, TX, United States, Zhiyang Wang, Calnetix Technology, Cerritos, CA, United States Experimental Investigation of a SOFC/ MGT Hybrid Power Plant Test Rig: Impact and Characterization of a Fuel Cell Emulator GT Martina Hohloch, German Aerospace Center, Stuttgart, Germany, Andreas Huber, DLR, Stuttgart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technology, Stuttgart, Germany Conjugate Heat Transfer Analysis for Gas Turbine Film-Cooled Blade GT Kuo-san Ho, Honeywell, phoenix, AZ, United States, Jong-shang Liu, Honeywell International, Phoenix, AZ, United States, Thomas Elliott, Honeywell international, Chandler, AZ, United States, bruno Aguilar, Honeywell international, phoenix, AZ, United States FINAL PROGRAM 61

62 TUESDAY, JUNE 14 9:00-10:30 AM HEAT TRANSFER: NUMERI- CAL INTERNAL COOLING HEAT TRANSFER: NUMERICAL FILM COOLING MANUFACTURING MATERIALS & METALLURGY Numerical Internal Cooling: Multi-Phase Flow Numerical Film Cooling I Development and Performance of TBC and Advanced Coating Systems Paper Session Room 307A TA-11-5 Paper Session Room 307B TA-12-1 Paper Session Room 318A TA-21-2 Session Organizer: Paolo Venturini, Dipartimento di Meccanica e Aeronautica, Sapienza Session Co-Organizer: Danesh Tafti, Viginia Tech Session Chair: Ardeshir Riahi, Honeywell Session Co-Chair: Giovanna Barigozzi, Universita Di Bergamo Session Chair: Jeff Smith, Material Processing Technology, LLC Session Co-Chair: Tania Bhatia Kashyap, United Technologies Research Center Laurent Cretegny, General Electric 9:00 Numerical Investigation on Flow and Heat Transfer Characteristics of Steam and Mist/Steam in Internal Cooling Channels With Different Rib Angles GT Junxiong zeng, Xi an Jiaotong University, Xi an, Shaanxi, China, Tieyu Gao, Xian Jiaotong University, Xian, Shaanxi, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China, Jiangnan Zhu, Xi An Jiaotong University, Xi an, Shaanxi, China, Jiyou Fei, Dalian jiaotong university, Dalian, China Uncertainty Analysis and Data-Driven Model Advances for a Jet-in-Crossflow GT Julia Ling, Anthony Ruiz, Sandia National Labs, Livermore, CA, United States, Guilhem Lacaze, Sandia National Lab, Livermore, CA, United States, Joseph Oefelein, Sandia National Laboratories, Livermore, CA, United States Development of Advanced Thermal Barrier Coatings With Improved Temperature Capability GT Gregoire Witz, GE Power, Baden, Aargau, Switzerland, Markus Schaudinn, General Electric (Switzerland) GmbH, Baden, Switzerland, Joerg Sopka, GE Power AG, Mannheim, Germany, Tobias Buecklers, General Electric (Switzerland) GmbH, Birr, Switzerland 9:30 A Simple Physics-Based Model for Particle Rebound and Deposition in Turbomachinery GT Jeffrey Bons, Ohio State Univ, Columbus, OH, United States, Robin Prenter, The Ohio State University, Columbus, OH, United States, Steven Whitaker, Ohio State University, Columbus, OH, United States Numerical Simulations on the Leading Edge Film Cooling With Counter-Inclined Film- Hole Row GT Dan Zhao, Cunliang Liu, Northwestern Polytechnical University, Xi an, China, Yingni Zhai, Xi'an University of Architecture & Technology, Xi an, China, Hui-ren Zhu, Northwestern Polytechnical University, Xi an, China Advanced High Temperature Erosion Tunnel for Testing TBC and New Turbine Blade Materials GT Dongyun Shin, Awatef Hamed, University of Cincinnati, Cincinnati, OH, United States 10:00 Effects of Film Hole Exit Radiusing on Film Cooling Performance GT Antar Abdala, Helwan University, Faculty of Engineering, cairo, Egypt, Fifi Elwekeel, Helwan University,Faculty of industrial Education, cairo, Egypt, Qun Zheng, Harbin Engineering University, Harbin/Heilongjiang, China Prediction of Turbo Air Classifier Cut Size Based on Particle Trajectory GT Yuan Yu, Beijing University of Chemical Technology, Beijing, China, Alexandrina Untaroiu, Virginia Tech, Blacksburg, VA, United States, Mehdi Saadat, Benjamin Thomas, University of Virginia, Charlottesville, VA, United States, Houston Wood, Univ Of Virginia, Charlottesville, VA, United States 62 ASME 2016 TURBO EXPO

63 TUESDAY, JUNE 14 9:00-10:30 AM MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES OIL & GAS APPLICATIONS STEAM TURBINES Turbochargers - Bearing systems & Rotordynamics High Pressure Compression for Injection, EOR and CO2 storage LSB Vibrational Aspects II Paper Session Room 308C TA-23-8 Panel Session Room 401 TA Paper Session Room E2 TA Session Chair: Keun Ryu, Hanyang University Session Co-Chair: Thomas Chirathadam, Southwest Research Institute Session Chair: Manoj Gupta, Dresser-Rand- A Siemens Business Session Chair: Paul Petrie Repar, KTH Sweden Session Co-Chair: Robert Kielb, Duke University 9:00 Oil-Free Automotive Turbochargers: Drag Friction and On-Engine Performance Comparisons to Oil-Lubricated Commercial Turbochargers GT Keun Ryu, Hanyang University, Ansan, Gyeonggi-do, Korea (Republic), Zachary Ashton, BorgWarner Turbo Systems, Arden, NC, United States Challenges of CO2 Compression for CCS and SCO2 Brayton Cycles GT Jeff Moore, Southwest Research Institute, San Antonio, TX, United States Unsteady Force on Multi-Stage and Multi-Passage Turbine Long Blade Rows Induced by Wet-Steam Flows GT Hironori Miyazawa, Takashi Furusawa, Tohoku University, Sendai, Japan, Satoru Yamamoto, Tohoku Univ, Sendai , Japan, Yasuhiro Sasao, Mitsubishi Hitachi Power Systems, Takasagyo, Japan, Hiroharu Ooyama, MHPS LTD, kanagawa, Japan 9:30 A Rotordynamic, Thermal, and Thrust Load Performance Gas Bearing Test Rig and Test Results for Tilting Pad Journal Bearings and Spiral Groove Thrust Bearings GT Aaron Rimpel, Southwest Research Institute, San Antonio, TX, United States, Giuseppe Vannini, GE, Italy, Jongsoo Kim, Waukesha Bearings Corporation, Pewaukee, WI, United States High Pressure Centrifugal Compression Challenges in Injection, EOR and CCS GT Manoj Gupta, Dresser-Rand- A Siemens Business, Kuala Lumpur, Malaysia The Influence of Non-Equilibrium Wet Steam Effects on the Aeroelastic Properties of a Turbine Blade Row GT Christopher Fuhrer, ITSM, Stuttgart, Germany, Marius Gruebel, ITSM University of Stuttgart, Stuttgart, Germany, Paul Petrie Repar, KTH Sweden, Stockholm, Sweden, Damian Vogt, University of Stuttgart, Stuttgart, Germany 10:00 On the Influence of Thrust Bearings on the Nonlinear Rotor Vibrations of Turbochargers GT Ioannis Chatzisavvas, TU Darmstadt, Darmstadt, Deutschland, Germany, Aydin Boyaci, Technical University Darmstadt, Darmstadt, Germany, Andreas Lehn, Technical University of Darmstadt, Darmstadt, Germany, Marcel Mahner, TU Darmstadt, Darmstadt, Deutschland, Germany, Panagiotis Koutsovasilis, BorgWarner Turbo Systems Engineering GmbH, Kirchheimbolanden, Germany, Bernhard Schweizer, TU Darmstadt, Darmstadt, Germany FINAL PROGRAM 63

64 TUESDAY, JUNE 14 9:00-10:30 AM STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE PREDICTION STRUCTURES & DYNAMICS: ROTORDYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING Integrity of Engine Components Rotordynamic Testing and Balancing Mistuning of Blisks and Bladed Disks I Paper Session Room 300 TA-28-1 Paper Session Room 307C TA-30-4 Paper Session Room 308A TA-32-1 Session Chair: Mauro Macciò, Ansaldo Sviluppo Energia (ASEN) Session Co-Chair: Bjorn Sjodin, Siemens Industrial Turbomachinery AB Session Chair: Lorenzo Naldi, GE Session Co-Chair: Mateusz Golebiowski, Alstom Session Chair: Bernd Beirow, Brandenburg University of Technology Cottbus, Session Co-Chair: Evgeny Petrov, Sussex University 9:00 "Calculated Forecast of Cyclic Life for GTE Disks, Manufactured From Titanium Alloy Before and After Crack Initiation GT Denis Slobodskoy, Aleksandr Pakhomenkov, Rustam Azimov, NPO SATURN, Rybinsk, Yaroslavi Region, Russia Experimental Study on Frequency Band of Dynamic Vibration Absorber in Pipe Systems GT Xiufeng Yang, Lidong He, Beijing University of Chemical Technology, Beijing, China, Bingkang ZHANG, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, Beijing, China Influence of the Inter-Stage Coupling Flexibility on the Dynamics of Multi-Stage Rotors GT Florence Nyssen, University of Liege, Liege, Belgium, Jean-Claude Golinval, Univ of Liege, Liege, Belgium 9:30 Mechanical Behavior Study of Steam Turbine Casing Bolts Under In-Service Conditions GT Nailong Zhao, Weizhe Wang, Hui Hong, RICHARD AMANKWA ADJEI, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China Dynamic Characteristics of Rotor System With Additional Constraint due to Rub-Impact GT Jie Hong, Pingchao Yu, Dayi Zhang, Beihang University, Beijing, China, Zhichao Liang, 405 Research group, Beihang University, Beijing, China, Qicheng Zhang, Beihang University, Beijing, China Sensitivity Analysis of High-Frequency Forced Response for Mistuned Bladed Discs Based on High-Fidelity Models GT Yuanqiu Tan, Chaoping Zang, Yongliang Duan, Nanjing University of Aeronautics and Astronautics, Nanjing, China, Evgeny Petrov, Sussex University, Brighton, United Kingdom, Biao Zhou, njing University of Aeronautics and Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing University of Aeronautics and Astro, Nanjing, China 10:00 Influence of Temperature and Pressure Fluctuations on the Mechanical Behavior of a Seal Structure in Steam Valve Under In-Service Conditions GT Hui Hong, Weizhe Wang, Nailong Zhao, Zhenwei Cai, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China Suppression of Subsynchronous Vibrations in a 11 MW Steam Turbine Using Integral Squeeze Film Damper Technology at the Exhaust Side Bearing GT Riccardo Ferraro, Michael Catanzaro, GE Oil&- Gas, Florence, Italy, Jongsoo Kim, Waukesha Bearings Corporation, Pewaukee, WI, United States, Michela Massini, Waukesha Bearings Corporation, Rickmansworth, Hertfordshire, United Kingdom, Davide Betti, GE Oil&Gas, Florence, Italy, Richard J. Livermore-Hardy, Waukesha Bearings Corporation, Rickmansworth, Hertfordshire, United Kingdom Forced Response Analysis of a Mistuned Compressor Blisk Comparing Three Different Reduced Order Model Approaches GT Mauricio Gutierrez Salas, KTH Royal Institute of Technology, Sweden, Stockholm, Sweden, Ronnie Bladh, Siemens Ind Turbomachinery AB, Finspong, Sweden, Paul Petrie Repar, KTH Sweden, Stockholm, Sweden, Damian Vogt, University of Stuttgart, Stuttgart, Germany, Hans Mårtensson, GKN Aerospace, Trollhattan, Sweden, Torsten Fransson, KTH, Heat and Power Technology, Stockholm, Sweden 64 ASME 2016 TURBO EXPO

65 TUESDAY, JUNE 14 9:00-10:30 AM STUDENT ADVISORY SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS The Art of the Peer Review Process: Best Practices for Crafting and Responding to Paper Reviews sco2 Turbines and Seals Real Hardware and Atypical Flow Conditions Tutorial Session Room E6 TA-35-2 Paper Session Room 317B TA-36-3 Paper Session Room 318B TA-37-6 Session Chair: Bernd Prade, Siemens AG Power & Gas Session Co-Chair: Gilles Bourque, RRC Session Chair: Jeff Moore, Southwest Research Institute Session Chair: Mark Celestina, NASA GRC 9:00 T S-CO2 Turbine Design for Decay Heat Removal System of Sodium Cooled Fast Reactor GT Seong Kuk Cho, JEKYOUNG LEE, KAIST, Daejeon, N/A, Korea (Republic), Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic), Jae Eun Cha, KAERI, Daejeon-City, Korea (Republic) Design of Experiments and Numerical Simulation of Deteriorated High Pressure Compressor Airfoils GT Gerald Reitz, Institut für Flugantriebe und Strömungsmaschinen, Braunschweig, Germany, Stephan Schlange, Jens Friedrichs, TU Braunschweig Inst of Aircraft Propulsion & Turbomachinery, Braunschweig, Germany 9:30 10:00 U T O R I A L Performance of Supercritical CO2 Dry Gas Seals Near the Critical Point GT Mohd Fairuz Zakariya, The University of Queensland, St. Lucia, Queensland, Australia, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia Coupled Physics Performance Predictions and Risk Assessment for Dry Gas Seal Operating in MW-Scale Supercritical CO2 Turbine GT Azam Thatte, GE, Niskayuna, NY, United States, Voramon Dheeradhada, GE Global Research, Niskayuna, NY, United States Numerical Simulation of Particulates in Multi-Stage Axial Compressors GT Swati Saxena, GE Global Research, Niskayuna, NY, United States, Giridhar Jothiprasad, Corey Bourassa, GE Global Research Center, Niskayuna, NY, United States, Byron Pritchard, GE Aviation, Evandale, OH, United States Effect of Ice and Blade Interaction Models on Compressor Stability GT Swati Saxena, GE Global Research, Niskayuna, NY, United States, George Woo, Rajkeshar Singh, GE Global Research Center, Niskayuna, NY, United States, Andrew Breeze-Stringfellow, GE Aviation, Cincinnati, OH, United States, Tsuguji Nakano, Peter Szucs, GE Aviation, Evandale, OH, United States FINAL PROGRAM 65

66 TUESDAY, JUNE 14 9:00-10:30 AM TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY Low Pressure Turbine Aerodynamics II Optimization Methods and Applications Comparative Analysis and Uncertainty Quantification Paper Session Room 318C TA-38-7 Paper Session Room 403 TA-39-1 Paper Session Room 403 TA Session Chair: Roberto Pacciani, University Of Florence Session Co-Chair: Jonathan Ong, GE, Garching Session Chair: Marcus Meyer, Rolls-Royce Deutschland Session Co-Chair: Christoph Starke, Siemens AG Session Chair: Michel van Rooij, Netherlands Aerospace Centre NLR 9:00 Aerodynamic Loading Distribution Effects on Off-Design Performance of Highly Loaded LP Turbine Cascades Under Steady and Unsteady Incoming Flows GT Daniele Simoni, University of Genova, Genova, Italy, Pietro Zunino, Marina Ubaldi, Università di Genova, Genova, Italy, Marco Berrino, University of Genova, Genova, Italy, Francesco Bertini, GE AvioAero, Rivalta di Torino, Italy Gradient-Based Adjoint and Design of Experiment CFD Methodologies to Improve the Manufacturability of High Pressure Turbine Blades GT Giulio Zamboni, Gabriel Banks, Simon Bather, Rolls-Royce plc, Derby, United Kingdom Calculation of Film-Cooling Effectiveness and Aerodynamic Losses Using DES/SAS and RANS Methods and Compared With Experimental Results GT Xiao-Chun Lin, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Jian-Jun Liu, Institute of Engineering Thermophysics, Beijing, China, Baitao An, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China 9:30 Investigations of the Actuation Effect of a Single DBD Plasma Actuator for Flow Separation Control Under Simulated Low-Pressure Turbine Blade Conditions GT Elisa Pescini, Fedele Marra, University of Salento, Lecce, Lecce (Puglia), Italy, Maria Grazia De Giorgi, University of Salento Dip. Di Ing. Inno, Lecce, Italy, Luca Francioso, CNR- IMM, Lecce, Italy, Antonio Ficarella, University of Salento, Lecce, Italy Adjoint Response Surface Method in Aerodynamic Shape Optimization of Turbomachinery Blades GT Xiao Tang, Jiaqi Luo, Peking University, Beijing, China, Feng Liu, University Of California Irvine, Irvine, CA, United States Spanwise Spectra, Reynolds Stresses and Correlations From DNS of Turbine Like APG Boundary Layers GT Mark P. Simens, Universidad Politecnica de Madrid, Madrid, Spain, Ayse G. Gungor, Istanbul Technical University, Istanbul, Turkey 10:00 Experimental and Numerical Verification of the Core-Flow in a New Low-Pressure Turbine GT Michael Henke, Leibniz Universitaet Hannover, Hannover, Germany, Lars Wein, Gottfried Wilhelm Leibniz Universitaet, Hanover, Germany, Tim Kluge, Marc Heinz-Otto Biester, Leibniz Universität Hannover, Hannover, Germany, Yavuz Guendogdu, MTU, Munich, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany Aerodynamic Design Optimization of the Last Stage of a Multi-Stage Compressor by Using an Adjoint Method GT Jing Yang, Pekin University, Beijing, China, Jiaqi Luo, Peking University, Beijing, China, Juntao Xiong, Feng Liu, University of California Irvine, Irvine, CA, United States UNCERTAINTY QUANTIFICATION IN TURBOMACHINERY SIMULATIONS GT Gianluca Iaccarino, Stanford University, Stanford, CA, United States, Michael Emory, Cascade Technologies, Palo Alto, CA, United States, Gregory Laskowski, GE Aviation, Lynn, MA, United States 66 ASME 2016 TURBO EXPO

67 TUESDAY, JUNE 14 9:00-10:30 AM TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY WIND ENERGY Unsteady Flows in Compressors III Environmental Issues in Turbomachinery Paper Session Room 327 TA-44-6 Tutorial Session Room 402 TA Session Chair: Kenneth Sudar, NASA Glenn Research Center Session Co-Chair: William J. Gooding, Purdue University Session Chair: Aya Diab, Faculty of Engineering - Ain Shams University Session Co-Chair: Ricardo Martinez-Botas, Imperial College London Andrew Nix, West Virginia University 9:00 Development and Evaluation of a Performance Estimation Methodology for Fans Operating Within Non-Homogeneous Inflow GT Dirk Schoenweitz, German Aerospace Center (DLR), Cologne, Germany, Rainer Schnell, German Aerospace Center (DLR), Koeln, Germany T U 9:30 10:00 Numerical and Experimental Studies of Reynolds Number and Stator Clocking Effect on Performance of a High-Loaded Two-Stage Compressor With 3.7 Total Pressure Ratio GT Victor Mileshin, Nikolay Savin, Pavel Kozhemyako, Iaroslav DRUZHININ, Central Institute of Aviation Motors, Moscow, Russia Near Stall Behavior of a Transonic Compressor Rotor With Casing Treatment GT Christoph Brandstetter, Technische Univeristät Darmstadt, Darmstadt, Hessen, Germany, Sina Stapelfeldt, Rolls-Royce-Germany, Blankenfelde-Mahlow, Germany, Mehdi Vahdati, Imperial College London, London, United Kingdom, Felix Holzinger, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Germany T O R I A L FINAL PROGRAM 67

68 TUESDAY, JUNE 14 10:45AM - 12:45 PM AIRCRAFT ENGINE COAL, BIOMASS & ALTERNATIVE FUELS COMBUSTION, FUELS & EMISSIONS Transient Engine Simulation - Its Role in Design and Development Novel Aviation Fuels Atomization & Sprays I Tutorial Session Room E6 TB-1-2 Paper Session Room 308B TB-3-2 Paper Session Room E3 TB-4-2 Session Chair: Syed Khalid, Gas Turbine Systems Solutions, LLC Session Chair: Subith Vasu, University of Central Florida Session Co-Chair: Ajay Agrawal, University of Alabama Session Chair: Wajid Chishty, NRC Institute for Aerospace Research Session Co-Chair: Scott Drennan, Convergent Science, Inc. 10:45 T Experimental and Modeling Study of the Combustion of Synthetic Jet Fuels: Naphtenic Cut and Blend with a GtL Jet Fuel GT Philippe Dagaut, CNRS-INSIS, Orleans, US & Canada only, France, Pascal Diévart, CNRS-INSIS, Orleans, US & Canada only, France Computation of Liquid Fuel Atomization and Mixing by Means of the SPH Method: Application to a Jet Engine Fuel Nozzle GT Thilo F. Dauch, Samuel Braun, Lars Wieth, Geoffroy Chaussonnet, Marc Keller, Institut fuer Thermische Stroemungsmaschinen (ITS) - Karlsruher Institut fuer Technologie (KIT), Karlsruhe, Germany, Rainer Koch, Karlsruhe Institut of Technology (KIT), Karlsruhe, Germany, Hans- Jorg Bauer, KIT - Institute for Thermal Turbomachinery (ITS), Karlsruhe, BW, Germany 11:15 11:45 12:15 U T O R I A L Influence of Nanoparticles on Spray Performance of Alternative Jet Fuels GT Kumaran Kannaiyan, Texas A&M University at Qatar, Doha, Qatar, Reza Sadr, Texas A&M University at Qatar, College Station, TX, United States A Study on the Emissions of Alternative Aviation Fuels GT Marina Braun-Unkhoff, German Aerospace Center (DLR), Stuttgart, Germany, Sebastian Riebl, DLR, Stuttgart, Germany, Uwe Riedel, German Aerospace Center, Institute of Combustion Technology, Stuttgart, Germany Testing of Synthesized Aromatic Kerosene (SAK) Aviation Fuel Blends at Simulated Altitudes GT Pervez Canteenwalla, Craig R. Davison, Wajid A. Chishty, National Research Council Canada, Ottawa, ON, Canada, Cynthia Ginestra, Shell Global Solutions, Houston, TX, United States, Brice Dally, Virent, Madison, WI, United States Study of Development of a Novel Dual Phase Airblast Injector for Gas Turbine Combustor GT Jianing Li, Mahmoud Hamza, Arul Kumaran, University of Cincinnati, Cincinnati, OH, United States, Umesh Bhayaraju, univ of cincinnati, Cincinnati, OH, United States, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States Effect of Aromatics in Jet Fuels on Spray Characteristics Downstream of an Aeronautical Pressure Swirl Atomizer GT Julien Leparoux, Safran Snecma Villaroche, Moissy Cramayel, France, Renaud Lecourt, ONERA, MAUZAC, France, Olivier Penanhoat, Safran Snecma Villaroche, Moissy Cramayel, France Spray Characteristics Measured in a New Flox Based Low Emission Combustor for Liquid Fuels Using Laser and Optical Diagnostics GT James D. Gounder, Anton Zizin, German Aerospace Center, Stuttgart, Germany, Oliver Lammel, German Aerospace Center (DLR), Stuttgart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technology, Stuttgart, Germany 68 ASME 2016 TURBO EXPO

69 TUESDAY, JUNE 14 10:45AM - 12:45 PM COMBUSTION, FUELS & EMISSIONS CYCLE INNOVATIONS HEAT TRANSFER: GENERAL HEAT TRANSFER Novel Combustion Concepts II Introduction to Thermodynamics for Gas Turbine Cycles and Cycle Simulation Blade Tip Heat Transfer Paper Session Room 317C TB-4-6 Tutorial Session Room E5 TB-6-11 Paper Session Type Room 307A TB-13-5 Session Chair: Bernd Prade, Siemens AG Power & Gas Session Co-Chair: Gilles Bourque, RRC Session Chair: Theoklis Nikolaidis, Cranfield University Session Organizer: Jay Kapat, University of Central Florida (UCF) Session Co-Organizer: James P. Downs, Florida Turbine Technology, Inc. Session Co-Chair: Eric Ruggiero, GE Aviation 10:45 11:15 11:45 Shockless Explosion Combustion: Experimental Investigation of a New Approximate Constant Volume Combustion Process GT Thoralf Reichel, Technical University of Berlin, Berlin, Germany, Bernhard Bobusch, TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Jan Schaepel, Chair of Measurement and Control, Berlin, Germany, Rudibert King, Technische Universität Berlin, Berlin, Germany, Rupert Klein, Freie Universität Berlin, Berlin, Germany Thermodynamic Evaluation of Pulse Detonation Combustion for Gas Turbine Power Cycles GT Joshua Gray, Technical University of Berlin, Berlin, Germany, Johann Vinkeloe, TU Berlin, Berlin, Germany, Phillip Berndt, Freie Universität Berlin, 14195, Germany, Jonas Moeck, TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Rupert Klein, Freie Universität Berlin, Berlin, Germany, Panagiotis Stathopoulos, TU Berlin, Berlin, Berlin, Germany Flameless Oxidation Combustor Development for a Sequential Combustion Hybrid Turbofan Engine GT Yeshayhaou Levy, Technion, Haifa 32000, Israel, Valery Sherbaum, Technion:- Israel Institute of Technology, Haifa, Israel, Vladimir Erenburg, Technion, Haifa, Israel, Igor Gaissinski, Technion, Israel Institute of Technology, Haifa, Israel Introduction To Thermodynamics For Gas Turbine Cycles And Cycle Simulation Tools GT Theoklis Nikolaidis, Cranfield University, Bedford, United Kingdom T U T O R I Numerical Investigation of the Blade Tip and Overtip Casing Aerothermal Performance in a High Pressure Turbine Stage GT Kun DU, Institute of Turbomachinery, Xi an Jiaotong University, Xi an, Shaanxi, China, ZHI- GANG LI, Xian JiaotongUniverity, Xian, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China Heat Transfer of Winglet Tips in a Transonic Turbine Cascade GT Fangpan Zhong, Chao Zhou, Peking University, Beijing, China, Haiteng Ma, Shanghai Jiao Tong University, Shanghai, China, Qiang Zhang, City University London, London, United Kingdom Cooling Injection Effect on a Transonic Squealer Tip: Part 1: Experimental Heat Transfer Results and CFD Validation GT Haiteng Ma, Shanghai Jiao Tong University, Shanghai, China, Qiang Zhang, City University London, London, United Kingdom, Li He, University of Oxford, Oxford, United Kingdom, Zhaoguang Wang, Lipo Wang, Shanghai Jiao Tong University, Shanghai, China 12:15 Investigation of Air Injection and Cavity Size Within a Circumferential Combustor to Increase G-Load and Residence Time GT Andrew E. Cottle, Marc Polanka, Air Force Institute of Technology, WPAFB, OH, United States, Larry P. Goss, Innovative Scientific Solutions Inc., Dayton, OH, United States, Corey Z. Goss, Innovative Scientific Solutions, Inc, Dayton, OH, United States A L Cooling Injection Effect on a Transonic Squealer Tip: Part 2: Analysis of Aerothermal Interaction Physics GT Haiteng Ma, Shanghai Jiao Tong University, Shanghai, China, Qiang Zhang, City University London, London, United Kingdom, Li He, University of Oxford, Oxford, United Kingdom, Zhaoguang Wang, Lipo Wang, Shanghai Jiao Tong University, Shanghai, China FINAL PROGRAM 69

70 TUESDAY, JUNE 14 10:45AM - 12:45 PM HEAT TRANSFER: TUTORIALS HEAT TRANSFER: EXPERIMENTAL INTERNAL COOLING HEAT TRANSFER: EXPERIMENTAL FILM COOLING Heat Transfer Tutorials I Experimental Internal Cooling: Rotating Rigs Film Cooling Issues and Measurements Tutorial Session Room 301 TB-14-1 Paper Session Room 307B TB-16-3 Paper Session Room 318B TB-19-2 Session Organizer: Andrew Nix, West Virginia University Session Organizer: Michael Dunn, The Ohio State University Session Co-Organizer: Om Sharma, United Technologies Research Center Session Organizer: Savas Yavuzkurt, Dept. of Mech. and Nuc. Engr./Pennsylvania State University Session Co-Chair: Marc Polanka, Air Force Institute of Technology 10:45 Two-Hour Tutorial: Key Concepts of Thermofluids in Turbomachinery Design GT Bijay K. Sultanian, Takaniki Communications, LLC, OVIEDO, FL, United States Rotating Heat Transfer Measurements on a Multi-Pass Internal Cooling Channel: II Experimental Tests GT Fabio Pagnacco, Luca Furlani, Alessandro Armellini, Luca Casarsa, University of Udine, Udine, Italy, Anthony Davis, Siemens Industrial Gas Turbines Ltd, Lincoln, United Kingdom Dependence of Film Cooling Effectiveness on 3D Printed Cooling Holes GT Paul Aghasi, Ephraim Gutmark, David Munday, University of Cincinnati, Cincinnati, OH, United States 11:15 T U T Rotating Heat Transfer Measurments on a Multi-pass Internal Cooling Channel - I Rig Development GT Fabio Pagnacco, Luca Furlani, Alessandro Armellini, Luca Casarsa, University of Udine, Udine, Italy, Anthony Davis, Siemens Industrial Gas Turbines Ltd, Lincoln, United Kingdom Effect of In-Hole Roughness on Film Cooling From a Shaped Hole GT Robert Schroeder, Sargent & Lundy, Wheaton, IL, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States 11:45 O R I Heat Transfer Investigation in a Smooth Rotating Channel With Thermography Liquid Crystal GT Ruquan You, Haiwang Li, Zhi Tao, Kuan Wei, Beihang University, Beijing, China Experimentally Measured Effects of Incidence Angle on the Adiabatic and Overall Effectiveness of a Fully Cooled Turbine Airfoil With Showerhead Shaped Holes GT Kyle Chavez, University of Texas at Austin, Austin, TX, United States, Thomas Slavens, Pratt & Whitney, East Hartford, CT, United States, David Bogard, Univ Of Texas At Austin, Austin, TX, United States 12:15 A L Effect of Rotation on a Gas Turbine Blade Internal Cooling System: Experimental Investigation GT Daniele Massini, Unversity of Florence, Firenze, Italy, Emanuele Burberi, Carlo Carcasci, Lorenzo Cocchi, Bruno Facchini, University of Florence, Florence, Italy, Alessandro Armellini, Luca Casarsa, Luca Furlani, University of Udine, Udine, Italy Effects of Internal and Film Cooling on the Overall Effectiveness of a Fully Cooled Turbine Airfoil With Shaped Holes GT Kyle Chavez, University of Texas at Austin, Austin, TX, United States, Thomas Slavens, Pratt & Whitney, East Hartford, CT, United States, David Bogard, Univ Of Texas At Austin, Austin, TX, United States 70 ASME 2016 TURBO EXPO

71 TUESDAY, JUNE 14 10:45AM - 12:45 PM INDUSTRIAL & COGENERATION MANUFACTURING MATERIALS & METALLURGY MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES Techno-Economic Analysis Metallurgy for Non-Metallurgists Turbochargers - Heat transfer & Systems Paper Session Room 318A TB-20-4 Tutorial Session Room 402 TB-21-8 Paper Session Room 308C TB-23-6 Session Chair: Yiguang Li, Cranfield University Session Co-Chair: Valentina Orlandini, University of Bologna Francesco Melino, University of Bologna Session Chair: Doug Nagy, Liburdi Turbine Services, Inc. Session Chair: Hua Chen, National Laboratory of Turbocharging Technology North China Eng Rsrch Inst Session Co-Chair: Qingzhen Bi, Shanghai Jiao Tong University 10:45 Thermo-Economic Analysis of a Photovoltaic-Fuel Cell Hybrid System With Energy Storage for CHP Production in Household Sector GT Francesco Melino, University of Bologna, Bologna, Italy, Antonio Peretto, Michele Bianchi, University of Bologna, Bologna 40136, Italy, Andrea De Pascale, DIN - University Of Bologna, Bologna, Italy, Maria Alessandra Ancona, Lisa Branchini, University of Bologna, Bologna, Italy Basic Metallurgical Concepts and Strengthening Mechanisms GT Maxine Watson, Quest Integrity Group LLC, Lower Hutt, OTHER, New Zealand Thermomechanical Analysis of Transient Temperatures in a Radial Turbine Wheel GT Mathias Diefenthal, IKDG RWTH Aachen University, Aachen, Germany, Michael Hopfinger, Christian Rakut, IKDG, RWTH Aachen University, Aachen, NRW, Germany, Manfred Wirsum, Rwth-Aachen University, Aachen, Germany, Tom Heuer, Borg Warner Turbo Systems Engineering Gmbh, Kirchheimbolanden, Germany 11:15 Micro Gas Turbine/Renewable Hybrid Power System for Distributed Generation: Effects of Ambient Conditions on Control Strategy GT Ma Shixi, Shanghai Jiao Tong University, Shanghai, Shanghai, China, Dengji Zhou, Huisheng Zhang, Shanghai Jiao Tong Univ, Shanghai, OO, China, Zhenhua Lu, Shanghai Jiao Tong University, Shanghai, China Part 2: Metallurgical Processing I: Manufacture by investment casting GT Mark Irwin, TPC Components AB, Hallstahammar, Sweden Numerical Investigation of a Novel Approach for Mitigation of Forced Response of a Variable Geometry Turbine During Exhaust Braking Mode GT Ben Zhao, Beijing Institute of Technology, Beijing, China, Liangjun Hu, Ford Motor Company, Dearborn, MI, United States, Harold Sun, Ford Motor Company, W Bloomfield, MI, United States, Ce Yang, Xin Shi, Beijing Institute of Technology, Beijing, China, James Yi, Ford Motor Company, Dearborn, MI, United States, Eric Curtis, Ford Motor Company, Milan, MI, United States, Abraham Engeda, Michigan State University, East Lansing, MI, United States 11:45 Thermo-Fluid Dynamic Analysis on the Compression Process of Liquid-Gas Two-Phase GT Abhay Mohan, Andong National University, Andong Si, Gyeongsangbuk-do, Korea (Republic), Palanikumar Chidambaram, FMTRC, Daejoo Machinery Co Ltd.,, Daegu, Korea (Republic), Abhilash Suryan, College of Engineering Trivandrum, Trivandrum, India, Heuy Dong Kim, Andong National University, Andong-si, Gyeongsangbuk-do, Korea (Republic) Part 3, Metallurgical Processing II: Coating GT Purusottam Sahoo, ASM, LLC, Houston, TX, United States Heat Transfer Correction Methods for Turbocharger Performance Measurements GT Mario Schinnerl, Continental Automotive GmbH, Regensburg, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany, Jan Ehrhard, Continental Automotive GmbH, Gruenstadt, Germany, Mathias Bogner, Continental Automotive GmbH, Regensburg, Germany 12:15 A Method to Evaluate the Heat Exchanger Retrofit for Industrial Gas Turbines Based on Technical and Economic Perspective GT WALEED ALBUSAIDI, Cranfield University, Bedfordshire, Bedfordshire, United Kingdom, Pericles Pilidis, Cranfield University, Cranfield, United Kingdom Part 4, Metallurgical Investigation: Damage mechanisms and failure analysis GT Doug Nagy, Liburdi Turbine Services, Inc., Dundas, ON, Canada Analysis of Heat Transfer in a Radial Turbine Wheel of Turbochargers and Prediction of Heat Transfer Coefficients With an Empirical Method GT Christian Rakut, IKDG, RWTH Aachen University, Aachen, NRW, Germany, Mathias Diefenthal, IKDG RWTH Aachen University, Aachen, Germany, Manfred Wirsum, Rwth-Aachen University, Aachen, Germany, Tom Heuer, Borg Warner Turbo Systems Engineering Gmbh, Kirchheimbolanden, Germany FINAL PROGRAM 71

72 TUESDAY, JUNE 14 10:45AM - 12:45 PM OIL & GAS APPLICATIONS ORGANIC RANKINE CYCLE POWER SYSTEMS STEAM TURBINES Aeroderivatives & Light Industrial Gas Turbine Engines: Upgrades & Updates ORC Power Systems Applications LSB Vibrational aspects I Panel Session Room 401 TB Paper Session Room 317B TB-25-1 Paper Session Room E2 TB-26-3 Session Chair: Patrick Campbell, GE Oil & Gas Session Chair: Marco Astolfi, Politecnico di Milano Session Chair: Paul Cooper, Alstom Power Limited Session Co-Chair: Tadashi Tanuma, Teikyo University 10:45 MAN Diesel & Turbo SE Product overview GT S.H. Wiers, Man Turbo Ag, Oberhausen, Germany, Alexander Wiedermann, MAN Diesel & Turbo SE, Oberhausen, Germany Installation and Performance Analysis of 125 kw Organic Rankine Cycle for Stationary Fuel Cell Power Plant GT Kwanghak Huh, Daesung Hitech, Seoul, Korea (Republic), Shamim Imani, Calnetix, Cerritos, CA, United States, Parsa Mirmobin, Calnetix Technologies, Cerritos, CA, United States CF Component Tests on Full-Scale Low Pressure Steam Turbine End Stage Blades GT Shilun Sheng, Siemens AG, Muelheim, Germany, Johan Flegler, Siemens AG, Power and Gas Division, Muelheim an der Ruhr, Germany, Balazs J. Becs, Siemens AG, Mülheim an der Ruhr, Germany, Michael Dankert, Siemens AG, Muelheim, Germany 11:15 Siemens Light Industrial & Aero Gas Turbine Overview GT Mike Welch, Siemens Energy Oil & Gas, Lincoln, United Kingdom Radial Turboexpander Optimization Over Discretized Heavy-Duty Test Cycles for Mobile Organic Rankine Cycle Applications GT Miles Robertson, Aaron Costall, Peter Newton, Imperial College London, London, United Kingdom, Ricardo Martinez-Botas, Imperial College London, Middlesex, United Kingdom Effects of Upstream Sprayed Water on Steam Flow Conditions and Blade Vibrations of a Low Pressure Steam Turbine GT Naoki Shibukawa, TOSHIBA CORPORATION, Yokohama, OTHER, Japan, Yoshihiro Ishikawa, TOSHIBA Corp., Yokohama, OO, Japan, Yoshifumi Iwasaki, Toshiba Corporation, Yokohama, Japan, Kota Chiba, Tohiba Corporation, Yokohama, Kanagawa, Japan 11:45 GE Aeroderivatives News GT Dave Wolf, OG-TMS Turbomachinery Solutions, West Chester, OH, United States Comparative Investigation on Waste Heat Driven Air Supply Systems for PEM Fuel Cells GT Lili YU, Weilin Zhuge, Yangjun Zhang, Jie Peng, Tsinghua University, Beijing, Beijing, China Alleviation of Rotating Pressure Oscillations in the Last LP Turbine Stage During Low-Load Conditions GT Brian Haller, GE Power, Rugby, Warwickshire, United Kingdom, Tim Rice, GE, Rugby, United Kingdom, Roland Sigg, GE - Steam Turbine Business, Baden, Switzerland 12:15 Solar turbine Product Line Update GT Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States Electric Power Generation From Low-Enthalpy Heat Recovery in FPSOs Using Kalina Cycle GT Carlos Eymel Campos Rordriguez, 3E Gestao Energetica, Itajuba, MG, Brazil, Thiago Gotelip Correa Veloso, Universidade Federal de Itajuba, Itajuba, MG, Brazil, Cesar A. Rodriguez Sotomonte, 3E Gestao Energetica, Itajuba, MG, Brazil, Antonio Alves de Moura Júnior, Christian Coronado Rodriguez, Universidade Federal de Itajuba, Itajuba, MG, Brazil, Marco Antonio Rosa do Nascimento, Federal University of Itajubá- UNIFEI, Itajubá, MG, Brazil Experimental Investigation of a Low Pressure Model Steam Turbine With Supporting Rib in Close Vicinity to the Last Stage Rotor Blades at Varying Operating Conditions GT Fabian F. Müller, Markus Schatz, Damian Vogt, University of Stuttgart, Stuttgart, Germany, Andreas Rehnsch, Siemens AG, Mülheim a.d. Ruhr, Germany 72 ASME 2016 TURBO EXPO

73 TUESDAY, JUNE 14 10:45AM - 12:45 PM STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE PREDICTION STRUCTURES & DYNAMICS: ROTORDYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING Fatigue Life Modeling Rotordynamic Effects of Bearings and Seals Mistuning of Blisks and Bladed Disks III Paper Session Room 300 TB-28-2 Paper Session Room 307C TB-30-3 Paper Session Room 308A TB-32-3 Session Chair: Chris Hulme, General Electric (Switzerland) GmbH. Session Co-Chair: Daniel Leidermark, Linköping University Session Chair: Jason Wilkes, Southwest Research Institute Session Chair: Bogdan Epureanu, University of Michigan Session Co-Chair: Loic Salles, Imperial college 10:45 Fatigue Behavior Comparisons Between Ultrasonic and Servohydraulic Axial Testing Procedures GT Onome Scott-Emuakpor, AFRL, Wright Patterson AFB, OH, United States, Tommy George, Casey Holycross, US Air Force Research Laboratory, Wright Patterson AFB, OH, United States, Joseph Beck, Perceptive Engineering Analytics, Lino Lakes, MN, United States, Jeff Brown, US Air Force Research Laboratory, Wright Patterson AFB, OH, United States Investigation on the Seal Structure Design and Rotor Vibration Controller for Back-to- Back Centrifugal Compressor GT Qihang Li, Weimin Wang, Binbin Liu, Xing Shao, Shuai Gao, Beijing University of Chemical Technology, Beijing, China Resonant Response of Mistuned Bladed Disk Expressed by Vibratory Stress GT Yasutomo Kaneko, Ryukoku University, Otsu, Shiga, Japan, Kazushi Mori, Mitsubishi Heavy Industries, Ltd., Hyogo , Japan, Hiroharu Ooyama, MHPS LTD, kanagawa, Japan 11:15 Analysis of Multiaxial Fatigue Evaluation in Engine Components Using an Improved Multiaxial Fatigue Life Model GT Cheng-cheng Zhang, Yuan Ren, Jing-yun Gao, Ying Li, Kun Yang, AVIC Commercial Aircraft Engine Co. Ltd, Shanghai, China Rigid Mode Vibration Control and Dynamic Behavior of Hybrid Foil-Magnetic Bearing (HFMB) Turbo Blower GT Sena Jeong, Korea Institute of Science and Technology, Seoul, Korea (Republic), Jungwan Kim, KIST, Seoul, South Korea, Korea (Republic), Doyoung Jeon, Sogang Univ, Seoul, South Korea, Korea (Republic), Yong-Bok Lee, Korea Institute of Science and Technology, Seoul, Korea (Republic) Forced Vibration of Mistuned Bladed Discs in Last Stage LP Steam Turbine GT Romuald Rzadkowski, Institute of Fluid Flow Machinery, Gdansk, Poland, Artur Maurin, Institute of Fluid Flow Machinery, Gdansk Pomorskie, Poland, Leszek Kubitz, Institute of Fluid Flow Machinery, Gdansk, Poland, Ryszard Szczepanik, Air Force Institute of Technology, Warsaw, Poland 11:45 12:15 Development of a Fatigue Life Assessment and Prediction Framework for a Bimetallic-Welded Thick-Wall Component of a Steam Turbine GT Mo-How Herman Shen, Sajedur Akanda, Ohio State University, Columbus, OH, United States, Xia Liu, Shanghai Electric, Shanghai, China, PENG WANG, Shanghai Electric Power Generation Equipment Co.,Ltd., Shanghai, China Low Cycle Fatigue of 9-12% Cr Steel at Elevated Temperature: Cyclic Deformation Behavior and Life Assessment GT Peng Zhao, Fu-Zhen Xuan, De-Long Wu, East China University of Science and Technology, Shanghai, China Auxiliary Bearing System Optimization for AMB Supported Rotors Based on Rotor Drop Analysis: Part I: Rotor Drop Analysis Method GT Jianming Cao, Rotor Bearing Solutions International, Charlottesville, VA, United States, Paul Allaire, Rotor Bearing Solutions International, LLC, Charlottesville, VA, United States, Timothy Dimond, Rotor Bearing solutions International, Charlottesville,, VA, United States, saeid dousti, Rotor Bearing Solutions International, Charlottesville, VA, United States Auxiliary Bearing System Optimization For AMB Supported Rotors Based On Rotor Drop Analysis - Part II: Optimization For Example Vertical And Horizontal Machines GT Jianming Cao, Rotor Bearing Solutions International, Charlottesville, VA, United States, Paul Allaire, Rotor Bearing Solutions International, LLC, Charlottesville, VA, United States, Timothy Dimond, Rotor Bearing solutions International, Charlottesville,, VA, United States, saeid dousti, Rotor Bearing Solutions International, Charlottesville, VA, United States Numerical Application of Double Modal Synthesis to an Industrial Mistuned Clustered Stator Vane and Experimental Validation GT Jonathan Philippe, Fabrice Thouverez, Laurent Blanc, Ecole Centrale de Lyon, ECULLY CEDEX, France, Marion Gruin, Safran Snecma, Moissy-Cramayel, France Multi-Stage Coupled Forced Response of Aircraft Engine Compressor and Turbine Bladed Discs GT Romuald Rzadkowski, Institute of Fluid Flow Machinery, Gdansk, Poland, Artur Maurin, Institute of Fluid Flow Machinery, Gdansk Pomorskie, Poland FINAL PROGRAM 73

74 TUESDAY, JUNE 14 10:45AM - 12:45 PM SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS sco2 Cycle and Machinery Modeling Design Perspectives Tip leakage flows I Paper Session Room 317A TB-36-4 Paper Session Room 317A TB-37-1 Paper Session Room 318C TB-38-3 Session Chair: Jason Wilkes, Southwest Research Institute Session Chair: Bronwyn Power, RR Corporation Session Co-Chair: Sungho Yoon, GE Global Research Session Chair: Young Seok Kang, Korea Aerospace Research Institute Session Co-Chair: Chao Zhou, Peking University 10:45 Dynamic Model of a 10 MW Supercritical CO2 Recompression Brayton Cycle GT Fabio Lambruschini, University of Genoa, Genova, Italy, Stephen Zitney, Eric Liese, NETL, Morgantown, WV, United States, Alberto Traverso, Univ Of Genova, Genova 16145, Italy Design of Compressor Endwall Velocity Triangles GT Kiran Auchoybur, University of Cambridge, Cambridge, Cambridgeshire, United Kingdom, Robert Miller, University of Cambridge, Cambridge, CB3 0DY, United Kingdom Effects of Tip Shroud Geometries on Low-Pressure Turbine Performance GT Sébastien Le Guyader, Julien Munoz, Jacques Demolis, TURBOMECA, Bordes, France 11:15 Performance Analysis and Comparison Study of Transcritical Power Cycles Using CO2-Based Mixtures as Working Fluids GT Jiaxi Xia, Jiangfeng Wang, Xi an Jiaotong University, Xi an, China, Pan Zhao, Xian Jiaotong University, Xian, China, Dai Yiping, Xi an Jiaotong University, Xi an City, China Effects of Rotor Tip Blade Loading Variation on Compressor Stage Performance GT Aniwat Tiralap, Gas Turbine Laboratory, MIT, Cambridge, MA, United States, C.S. Tan, Massachusetts Institute of Technology, Cambridge, MA, United States, Christian Cornelius, Siemens AG, Energy Sector, Muelheim, 45473, Germany, Eric Donahoo, Siemens Energy, Inc., Orlando, FL, United States, Matthew Montgomery, Siemens Energy, Inc., Jupiter, FL, United States On the Impact of Passive Tip-Injection on the Downstream Flow Field of a Shrouded LP-Turbine: CFD and Experimental Results GT Pouya Ghaffari, Reinhard Willinger, Technische Universität Wien, Vienna, Austria 11:45 Numerical Method for Simulating Flows of Supercritical CO2 Compressor With Nonequilibrium Condensation GT Takashi Furusawa, Hironori Miyazawa, Tohoku University, Sendai, Japan, Satoru Yamamoto, Tohoku Univ, Sendai , Japan Alleviation of Shock-Wave Effects on a Highly Loaded Axial Compressor Through Novel Blade Shaping GT Alistair John, University of Sheffield, Sheffield, United Kingdom, Shahrokh Shahpar, Rolls-Royce plc., Derby, United Kingdom, Ning Qin, University of Sheffield, Sheffield, South Yorkshire, United Kingdom A Novel Suction Side Winglet Design Method for High Pressure Turbine Rotor Tips GT Chao Zhou, Fangpan Zhong, Peking University, Beijing, China 12:15 A Study of S-CO2 Power Cycle for Waste Heat Recovery Using Isothermal Compressor GT Jin Young Heo, Yoonhan Ahn, Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic) Effect of Sweep on Performance of an Axial Compressor With Casing Grooves GT Shraman Goswami, Honeywell Technology Solutions, Bangalore, Karnataka, India, M. Govardhan, Indian Institute of Technology Madras, Chennai, India Aerodynamic Optimization of a Winglet-Shroud Tip Geometry for a Linear Turbine Cascade GT Min Zhang, Yan Liu, Tian-long Zhang, Mengchao Zhang, Dalian University of Technology, Dalian, China, Hongkun Li, Dalian University, Dalian P. R., China 74 ASME 2016 TURBO EXPO

75 TUESDAY, JUNE 14 10:45AM - 12:45 PM TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY Turbine Design Methods and Applications Radial Turbines Unsteady Flows in Compressors I Paper Session Room E1 TB-39-4 Paper Session Room E4 TB-42-1 Paper Session Room 403 TB-44-4 Session Chair: Asad Asghar, Royal Military College Of Canada Session Co-Chair: William Allan, V. Shyam, Session Chair: Bent Phillipsen, ABB Turbo Systems AG Session Co-Chair: Borislav Sirakov, Honeywell Turbo Technologies Session Chair: Yuan Dong, Pratt and Whitney Session Co-Chair: Mahmoud Mansour, Honeywell Aerospace 10:45 Design of Highly Loaded Turbine Stage for Small Gas Turbine Engine GT Prathapanayaka rajeevalochanam, S N Agnimitra Sunkara, Balamurugan Mayandi, Bala Venkata Ganesh Banda, CSIR- National Aerospace Laboratories, Bangalore, Karnataka, India, Veera Sesha Kumar Chappati, CSIR- National Aerospace Laboratories, Bengaluru, India, Kishor Kumar, CSIR- National Aerospace Laboratories, Bangalore, Karnataka, India Meanline Modeling of a Radial-Inflow Turbine Nozzle With Supersonic Expansion GT Shuo Li, ConceptsNREC, west lebanon, NH, United States, Eric Krivitzky, ConceptsNREC, White River Junction, VT, United States, Dr. Xuwen Qiu, Concepts NREC, Hanover, NH, United States Fast High Order Large Eddy Simulations on Many Core Computing Systems for Turbomachinery GT Yi Lu, Cambridge Flow Solutions Ltd, Cambridge, United Kingdom, Kai Liu, BoXeR Solutions kk, Kobe, Japan, W.N. Dawes, University of Cambridge, Cambridge, United Kingdom 11:15 11:45 Numerical Simulation of Twin Spool Axial Flow Turbines of a Small Gas Turbine Engine GT Prathapanayaka rajeevalochanam, CSIR- National Aerospace Laboratories, Bangalore, Karnataka, India, Ramana Murthy Seepana Venkata, Gas Turbine Research establishment, Bangalore, Karnataka, India, S N Agnimitra Sunkara, Balamurugan Mayandi, CSIR- National Aerospace Laboratories, Bangalore, Karnataka, India, Sharad Kapil, Gas Turbine Research establishment, Bangalore, Karnataka, India, Senthil Kumaran, National Aerospace Laboratories, Banglore, Karnataka, India Generation of the Equations for the Profile Losses Calculation in Blade Row of Axial Turbines in Design Analysis GT Oleg Baturin, Daria Kolmakova, Aleksei Gorshkov, Grigorii Popov, Samara State Aerospace University, Samara, Russia Investigations on the Generation and Weakening of Shock Wave in a Radial Turbine With Variable Guide Vanes GT Dengfeng Yang, Dazhong Lao, Ce Yang, Beijing Institute of Technology, Beijing, China, Liangjun Hu, Ford Motor Company, Dearborn, MI, United States, Harold Sun, Ford Motor Company, W Bloomfield, MI, United States Turbine Performance Under Pulsating Inflow: A Similarity Analysis GT Hua Chen, National Laboratory of Turbocharging Technology North China Eng Rsrch Inst, Tianjin, China, Apostolos Pesiridis, Brunel University London, Uxbridge, United Kingdom STABILIZING AND ACCELERATING SOLUTION OF HARMONIC BALANCE EQUATION SYSTEM USING THE LU-SGS AND BLOCK JACOBI METHODS GT Xiuquan Huang, Northwestern Polytechnical University, Xian, China, Dingxi Wang, Northwestern Polytechnical University, Xi an, China Analysis of the Unsteady Flow in Compressor Cascade With POD Method GT Wang Yangang, Li Yue, Chen Junxu, Northwestern Polytechnical University, Xi an, China 12:15 Improvement of Laminar-Turbulent Transition Modeling Within a Low-Pressure Turbine GT Alexandre Minot, Safran-Snecma, Moissy Cramayel, France, Julien Marty, ONERA, Meudon, France, Jean-Christophe Boniface, ONERA - Centre de Meudon, Meudon, France, Raphael Barrier, Itham Salah El Din, ONERA, Meudon, France Unsteady Rotating Radial Load of a Single Stage Radial Inflow Turbine GT Jonathan Marlier, Cryostar France Sas, Hesingue, France, Virginie Barbieux, NUMFLO, MONS, Belgium, Benoit Tartinville, Numeca, 1170 Brussels, Belgium Effect of Incoming Wakes on the Stator Performance in a Single-Stage Low Speed Axial Flow Compressor Operating at Design and Near Stall Conditions GT Guillaume Pallot, IHI Corporation, Tokyo, Japan, Dai Kato, IHI Corporation, Nishitama-Gun, Tokyo, Japan, Wataru Kanameda, Yutaka Ohta, Waseda University, Tokyo, Japan FINAL PROGRAM 75

76 TUESDAY, JUNE 14 2:30-5:30 PM AIRCRAFT ENGINE COAL, BIOMASS & ALTERNATIVE FUELS COMBUSTION, FUELS & EMISSIONS Nacelles, Nozzles and Mixers West Meets East: Coal Gasification, IGCC, and Polygeneration Combustion Dynamics: Flame Response to Perturbations Paper Session Room 318B TC-1-9 Panel Session Room 318B TC-3-5 Paper Session Room 317C TC-4-18 Session Chair: William Cousins, United Technologies Research Center Session Co-Chair: Vishnu Sishtla, UTC Climate Controls & Security Session Chair: Ting Wang, University Of New Orleans Session Co-Chair: Francesco Fantozzi, University of Perugia, Dip. Ingegneria Industriale Session Chair: Jacqueline O Connor, Pennsylvania State University Session Co-Chair: Santosh Hemchandra, Indian Institute of Science 2:30 Full-Scale Turbofan Demonstration of a Deployable Engine Air-Brake for Drag Management Applications GT Parthiv Shah, Gordon Pfeiffer, Rory Davis, Thomas Hartley, Zoltan Spakovszky Development of TU Gasification Technology and Its Commercial Application in China GT Jiansheng Zhang, Tsinghua University, Beijjing, China Swirl Flame Response to Simultaneous Axial and Transverse Velocity Fluctuations GT Aditya Saurabh, Institut Für Strömungsmechanik Und Technische Akustik, Berlin, Germany, Jonas Moeck, TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany 3:00 A Turbofan-Engine Nacelle Shape Design and Optimization Method for Natural Laminar Flow Control GT Songyang Li, Yongjian Zhong, AVIC Commercial Aircraft Engine Co., Ltd, Shanghai, Shanghai, China Update of Development of Gasification and Advanced Turbine Technology for Coal-Derived Synfuel and Hydrogen-Rich Programs in the U.S. Department of Energy GT Richard Dennis, US Dept Of Energy, Morgantown, WV, United States Modeling Flame Describing Functions Based on Hydrodynamic Linear Stability Analysis GT Kilian Oberleithner, Chair of Fluid Dynamics, Institute of Fluid Dynamics and Technical Acoustics/ TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany 3:30 Parametric Geometry and CFD Process for Turbofan Nacelles GT Alexander Heidebrecht, Cranfield University, Cranfield, United Kingdom, Tomasz Piotr Stankowski, David G. MacManus, Cranfield University, Cranfield University, United Kingdom he Recent Technology Advancement of ECUST Gasification Process GT Haifeng Lu, East China University of Science and Technology, Shanghai,, China Comparison of Flame Transfer Functions Acquired by Chemiluminescence and Density Fluctuation GT Johannes Peterleithner, Riccardo Basso, Jakob Woisetschlaeger, Franz Heitmeir, Raimund Schlüssler, Jurgen Czarske, Andreas Fischer 4:00 An Automated Approach to Nacelle Parameterisation Using Intuitive Class Shape Transformation Curves GT Robert Christie, Alexander Heidebrecht, Cranfield University, Cranfield, Bedfordshire, United Kingdom, David G. MacManus, Cranfield University, Cranfield University, Bedfordshire, United Kingdom Overview of NEDO's High-Efficiency Clean Coal Technology Development in Japan GT Nobuyuki Zaima, New Energy and Industrial Technology Development Organization, Kanagaw , Japan Experimental Analysis of High-Amplitude Temporal Equivalence Ratio Oscillations in the Mixing Section of a Swirl-Stabilized Burner GT Richard Blümner, Bernhard Cosic, Christian Oliver Paschereit, Kilian Oberleithner 4:30 Analytic Assessment of an Embedded Aircraft Propulsion GT Peter F. Pelz, TU Darmstadt, Darmstadt, Hessen, Germany, Ferdinand-J. Cloos, Technische Universität Darmstadt, Darmstadt, Germany, Jörg Sieber, MTU Aero Engines, München, Germany EPRI s Perspective on Gasification, IGCC, and Polygeneration GT Jeffrey N. Phillips, Electric Power Research Institute, Charlotte, NC, United States Identification of Multi-Parameter Flame Transfer Function for a Reheat Combustor GT Alessandro Scarpato, GE Power, Baden, Switzerland, Lisa Zander, TU Berlin, Berlin, Germany, Rohit Kulkarni, Bruno Schuermans, GE Power, Baden, Switzerland 5:00 Current Status and Prospect of Coal Gasification Projects in Korea GT Yongseung Yun, Inst For Advanced Engrg, Gyunggi-do , Korea (Republic) Large-Eddy Simulation and Linear Acoustic Analysis of a Diffusion Swirling Flame Under Forcing and Self-Excitation GT Man ZHANG, AVIC Commercial Aircraft Engine CO., LTD, Shanghai, shanghai, China 76 ASME 2016 TURBO EXPO

77 TUESDAY, JUNE 14 2:30-5:30 PM COMBUSTION, FUELS & EMISSIONS CONTROLS, DIAGNOSTICS & INSTRUMENTATION EDUCATION Dry Low-NOx Combustor Development Gas Path Performance Monitoring Design Paper Session Room E3 TC-4-28 Paper Session Room 308B TC-5-4 Paper Session Room 317B TC-7-1 Session Chair: Michael Duesing, ANSAL- DO ENERGIA Session Co-Chair: Jean-Michel Lourier, General Electric DE Session Organizer: David Doel, GE Aviation Session Co-Chair: Donald L. Simon, NASA Glenn Research Center Session Chair: Dr. Anestis I. Kalfas, Aristotle University of Thessaloniki Session Co-Chair: Dr. Claudio Lettieri, TU Delft 2:30 3:00 An Overview of Low-Emission Combustion Research at NASA Glenn GT Dhanireddy Reddy, Chi-Ming Lee, NASA Glenn Research Center, Cleveland, OH, United States Investigation of a Novel Fuel Injector for Dry Low NOx Combustor GT Mahmoud Hamza, Arul Kumaran, Jianing Li, University of Cincinnati, Cincinnati, OH, United States, Umesh Bhayaraju, univ of cincinnati, Cincinnati, OH, United States, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States Prediction of Compressor Fouling Rate Under Time Varying Operating Conditions GT Houman Hanachi, Jie Liu, Carleton University, Ottawa, ON, Canada, Avisekh Banerjee, Ying Chen, Life Prediction Technologies Inc., Ottawa, ON, Canada Industrial Gas Turbine Health and Performance Assessment With Field Data GT Ioannis Roumeliotis, Hellenic Naval Academy, Piraeus, 18539, Greece, Nikolaos Aretakis, National Technical University of Athens, Attiki, Greece, Alexios Alexiou, National Technical University of Athens, Athens, Greece Introduction of a Project-Based-Course in Turbine Stage Design for Undergraduate Students at Graz University of Technology GT Andreas Marn, Graz University of Technology, Graz, Austria, Florian Schönleitner, Technische Universität Graz, Graz, Austria, Johannes Peterleithner, Jakob Woisetschlaeger, Franz Heitmeir, Graz University of Technology, Graz, Austria Unmanned Air Vehicle Interdisciplinary Design Project GT Ioannis Templalexis, Hellenic Air Force Academy, Greece, Theodore Lekas, Aggelos Koutsomichalis, Hellenic Airforce Academy, Athens, Greece, Anestis I. Kalfas, Aristotle University of Thessaloniki, Thessaloniki, Greece 3:30 Laser-Based Investigation on a Dry Low Emission Industrial Prototype Burner at Atmospheric Pressure Conditions GT Arman Ahamed Subash, Atanu Kundu, Robert Collin, Jens Klingmann, Marcus Aldén A Computational and Experimental Compressor Design Project for Japanese and British High-School Students GT Sam Grimshaw, University of Cambridge, Cambridge, United Kingdom, Carl Sequeira, Hybrid Air Vehicles Ltd, Bedford, Bedfordshire, United Kingdom, Max Hewkin-Smith, Whittle Laboratory, University of Cambridge, Cambridge, United Kingdom 4:00 4:30 5:00 Experimental Study of a Low-NOx Lean Direct Injection Combustor Design GT Abdelallah Ahmed, Jacob Haseman, Samir Tambe, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States Comparison of the Combustion Characteristics of Liquid Single-Component Fuels in a Gas Turbine Model Combustor GT Jasper Grohmann, William O Loughlin, Wolfgang Meier, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technology, Stuttgart, Germany FlameSheet Combustor Engine and Rig Validation for Operational and Fuel Flexibility With Low Emissions GT Hany Rizkalla, Peter Stuttaford, Khalid Oumejjoud, Nicolas Demougeot, Justin Bosnoian, Fred Hernandez, Matthew Yaquinto, Afzal Pasha Mohammed, Ryan Weller, Dwain Terrell Design of Dynamic Tracking Filter for Model Based Diagnosis of Gas Turbine Engine GT Yongwen Liu, Shanghai Jiao Tong University, Shanghai, China, Yunsheng Liu, Naval Academy of Armament, Beijing, China Full and Part-Load Performance Deterioration Analysis of Industrial Three-ShaftGas Turbine Based on Genetic Algorithm GT Yang Qingcai, Shuying Li, Yunpeng Cao, Ningbo Zhao, Harbin Engineering University, Harbin, China Derivative Design of Axial Fan Range: From Academia to Industry GT Tommaso Bonanni, Sapienza, University of Rome, Roma, Italy, David Volponi, Sapienza University of Rome, Rome, Italy, Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Giovanni Delibra, Sapienza University of Rome, Rome, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States, Lucio Cardillo, Sapienza University of Rome, Rome, Italy FINAL PROGRAM 77

78 TUESDAY, JUNE 14 2:30-5:30 PM ELECTRIC POWER HEAT TRANSFER: GENERAL HEAT TRANSFER HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) Voice of the Customer - User Experience with Gas Turbine Technology Impingement Heat Transfer with Surface Enhancement Rotor-Rotor and Rotor-Stator Disc Cavities Panel Session Room 317B TC-8-2 Paper Session Room 301 TC-13-7 Paper Session Room 307A TC-15-2 Session Chair: Justin Zachary, Samsung Session Organizer: Meinhard T. Schobeiri, Texas A & M University Session Co-Organizer: Jianhua Wang, University of Science & Technology Session Organizer: Alexander Mirzamoghadam, Honeywell International Session Co-Organizer: Chiyuki Nakamata, IHI Corporation 2:30 Influences of Target Surface Roughness on Impingement Jet Array Heat Transfer: Part 1: Effects of Roughness Pattern, Roughness Height, and Reynolds Number GT Warren Buzzard, Zhong Ren, Phil Ligrani, University of Alabama in Huntsville, Huntsville, AL, United States, Chiyuki Nakamata, IHI Corporation, Tokyo, Japan, Satoshi Ueguchi, IHI Corporation, Yokohoma, Japan Analysis of Heavy Duty Gas Turbine Stator-Rotor Cavity Through 3D CFD - 1D Fluid Network - Field Measurements Combined Approach GT Francesco Bavassano, Ansaldo Sviluppo Energia, Genoa, Italy, Marco Mantero, Ansaldo Sviluppo Energia, Genova, Genova, Italy, Thibault Gasnier, Emanuele Ronconi, Ansaldo Sviluppo Energia, Genoa, Italy 4:30 4:00 3:30 3:00 P A N E L Influences of Target Surface Roughness on Impingement Jet Array Heat Transfer: Part 2: Effects of Roughness Shape, and Reynolds Number GT Warren Buzzard, Zhong Ren, Phil Ligrani, University of Alabama in Huntsville, Huntsville, AL, United States, Chiyuki Nakamata, IHI Corporation, Tokyo, Japan, Satoshi Ueguchi, IHI Corporation, Yokohoma, Japan Use of Rib Turbulators to Enhance Post-Impingement Heat Transfer for Curved Surface GT Jahed Hossain, Christian Garrett, Andres Curbelo, John Harrington, Wenping Wang, University of Central Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Steven Thorpe, Michael Maurer, Ansaldo Energia Switzerland Ltd., Baden, Switzerland Heat Transfer and Fluid Flow of a Single Jet Impingement in Cross-Flow Modified by a Vortex Generator Pair GT Bengt Sunden, Chenglong Wang, Lund University, Lund, Sweden, Lei Wang, Lei Luo, Lund University, Energy Sciences, Lund, Sweden Secondary Flow and Extra Heat Transfer Enhancement of Ribbed Surface After Jet Impingement GT Zhaoguang Wang, Qiang Zhang, City University London, London, United Kingdom, Kexin Liu, Changan UK R&D Centre Limited, Nottingham, United Kingdom, Youyou Yan, City University London, London, United Kingdom Direct Numerical Simulation of Rotating Cavity Flows Using a Spectral Element-Fourier Method GT Diogo Berta Pitz, University of Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom, Olaf Marxen, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom Modeling of Compressor Drum Cavities With Radial Inflow GT Dario Amirante, Zixiang Sun, University of Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom, Nicholas Atkins, Cambridge University, Cambridge, United Kingdom Effect of Buoyancy-Induced Rotating Flow on Temperatures of Compressor Discs GT Hui Tang, University of Bath, Bath, United Kingdom, J Michael Owen, University of Bath, Bath BA2 7AY, United Kingdom Effect of Bolts on Flow and Heat Transfer in a Rotor-Stator Disc Cavity GT Sulfickerali Noor Mohamed, Univ of Surrey, Guildford, United Kingdom, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom 5:00 Impingement Cooling in Narrow Rectangular Channel With Novel Surface Features GT Sarwesh N. Parbat, Sin Chien Siw, University of Pittsburgh, Pittsburgh, PA, United States, Minking Chyu, Univ Of Pittsburgh, Pittsburgh, PA, United States Experimental Investigation on Swirl and Heat Transfer Within a Rotor-Stator Cavity GT Daniele Massini, Unversity of Florence, Firenze, Italy, Bruno Facchini, University of Florence, Florence, Italy, Riccardo Da Soghe, Ergon Research, Firenze, Italy, Mirko Micio, ERGON research srl, Florence, Italy 78 ASME 2016 TURBO EXPO

79 TUESDAY, JUNE 14 2:30-5:30 PM HEAT TRANSFER: COMBUS- TORS (WITH COMBUSTION, FUELS & EMISSIONS) MANUFACTURING MATERIALS & METALLURGY MICROTURBINES, TURBO- CHARGERS & SMALL TURBOMACHINES Combustor Liner Cooling - Numerical and Optimization Gas Turbine Repair Technologies Turbochargers - Concepts & Performance Paper Session Room 307B TC-17-2 Panel Session Room 403 TC-21-4 Paper Session Room 308C TC-23-7 Session Chair: Uwe Ruedel, Alstom, Gas Turbines Session Co-Chair: Stephen Lynch, Penn State University Session Chair: Boran Cakin, GE Power and Water Session Co-Chair: Doug Nagy, Liburdi Turbine Services, Inc. Session Chair: Harold Sun, Ford Motor Company Session Co-Chair: Borislav Sirakov, Honeywell Turbo Technologies 2:30 Unsteady CFD Investigation of Effusion Cooling Process in a Lean Burn Aero-Engine Combustor GT Lorenzo Mazzei, Alessio Picchi, Antonio Andreini, Bruno Facchini, University of Florence, Florence, Italy, Ignazio Vitale, GE Avio, Rivalta di Torino (TO), Italy New Solid-State Wrought Metal Deposition Process for Additive Manufacturing, Repair, and Coatings GT Nanci Hardwick, Aeroprobe Corporation, Christiansburg, VA, United States Preliminary DoE Analysis and Control of Mapping Procedure for a Turbocharger on an Engine Gas-Stand GT Calogero Avola, Pavlos Dimitriou, Richard Burke, Colin Copeland, University of Bath, Bath, Bath and North East Somerset, United Kingdom 3:00 A 3D Coupled Approach for the Thermal Design of Aero-Engine Combustor Liners GT Lorenzo Mazzei, Antonio Andreini, Bruno Facchini, University of Florence, Florence, Italy, Lorenzo Bellocci, Ge Avio, Rivalta di Torino (TO), Italy Field Evalvaluation of Industrial Gas Turbine Blade Modified for Life Improvement GT Paul Lowden, Liburdi Turbine Services, Dundas, Canada Development of a Multipoint Matching Method for Turbocompound Systems GT Zhanming Ding, Weilin Zhuge, Yangjun Zhang, Tsinghua University, Beijing, China, Yong Yin, Commercial Vehicle Technical Center, Dongfeng Motor Company Limited, Wuhan, China, Shuyong Zhang, Science and Technology on Diesel Engine Turbocharging Laboratory, Tianjin, China 3:30 4:00 4:30 Validation of Surface Temperature Measurements on a Combustor Liner Under Full-Load Conditions Using a Novel Thermal History Paint GT Robert Krewinkel, Jens Färber, Christopher Pilgrim, Jörg Peter Feist, Raffaele Saggese, Stéphane Berthier, Silvia Araguas, Alvaro Gonzalez, Martin Lauer, Dirk Frank, Ulrich Orth, Combustor Effusion Cooling Multiparameter Aerothermal Numerical Analysis GT Nicolas Savary, Guillaume Cottin, Robin Herve, Turbomeca, Safran Group, Bordes, France Detailed Large Eddy Simulations (LES) of Multi-Hole Effusion Cooling Flow for Gas Turbines GT Yonduck Sung, Anne L. Dord, Gregory Laskowski, Lee Shunn, Greg Natsui, Jay Kapat, Gas Turbine Component Repair Development for the Korean Market GT Hyun Choi, Hanwha Techwin, Changwon-si, Gyeongsangnama Repair and Reverse Engineering for Combustion Parts of type GT11NM Gas Turbine GT Youn Seok-Jo, Sung-il Turbine, Gangseo-gu, Busan, Korea (Republic) Fabrication of New GT13DM Inner Liner and Hot Gas Casing GT Sanmugham Thanaraj, TNB Repair and maintenance, Petaling Jaya, Malaysia Method to Determine Initial Estimates for the Air Handling System Layout of IC Engines Based on Turbomachinery Design Rules GT Rodrigo Rodriguez Erdmenger, GE, Munich, Germany, Aneesh Vadvadgi, GE Global Research, Bangalore, KA, India, Cathal Clancy, General Electric Deutschland Holding Gmb, Garching bei Munchen, Germany, Thomas Lavertu, GE Global Research, Niskayuna, NY, United States Analysis and Comparison of the Performance of an Inverted Brayton Cycle and Turbo-Compounding With Decoupled Turbine and CVT Driven Compressor for Small Automotive Engines GT Pengfei Lu, Chris Brace, Bo Hu, Colin Copeland, University of Bath, Bath, United Kingdom 5:00 Rapid Preliminary Combustor Design Using a Flow Network Approach GT Benjamin Du Toit, Flownex, Potchefstroom, North West, South Africa, Stephen Theron, PADT, Inc, Denver, CO, United States Hermetic MA-40-kW-Class Steam Turbine System for the Bottoming Cycle of Internal Combustion Engines GT Michael H. Kraus, Frank Opferkuch, Michael Deichsel, Peter Hirsch, Christoph Heckel FINAL PROGRAM 79

80 TUESDAY, JUNE 14 2:30-5:30 PM OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS Compressor Design and Performance Mechanical Integrity of Steam Turbines Bearings - Gas Bearings 1 Paper Session Room E3 TC-24-1 Tutorial Session Room E2 TC Paper Session Room 300 TC-31-1 Session Chair: Mirko Morini, University of Parma Session Co-Chair: Kevin Hoopes, Southwest Research Institute Session Chair: Grant Ingram, Durham University Session Co-Chair: Nikola Kafedzhiyski, KTH Session Chair: Aaron Rimpel, Southwest Research Institute Session Co-Chair: Mihai Arghir, Universite De Poitiers - Instit Pprime 2:30 Calculation of Enthalpy and Entropy From Experimentally Measurable Quantities GT Shane Coogan, Klaus Brun, Sarah Simons, Brandon Ridens, Southwest Research Institute, San Antonio, TX, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States The Basics of Mechanical Integrity for Steam Turbines - Part 1 GT Jaroslaw Szwedowicz, General Electric (Switzerland) GmbH, Baden, Switzerland Scaling Laws of Radial Clearance and Bump Stiffness of Radial Foil Bearings GT Srikanth Honavara Prasad, The University of Texas at Arlington, Arlington, TX, United States, Daejong Kim, University of Texas at Arlington, Arlington, TX, United States 3:00 3:30 Experimental Investigation of Stall and Surge in a Multistage Compressor GT Enrico Munari, University of Ferrara, Ferrara, Emilia Romagna, Italy, Mirko Morini, University of Parma, Parma, Italy, Michele Pinelli, Pier Ruggero Spina, University of Ferrara, Ferrara, Italy, Alessio Suman, Università di Ferrara, Ferrara, Italy An Academic Test Rig for Industrial Centrifugal Compressor Stages: A Design Approach GT Alessandro Bianchini, Univ of Florence, Firenze, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fiorentino (FI), Italy The Basics of Mechanical Integrity for Steam Turbines - Part 2 GT Henning Almstedt, Siemens AG, Muelheim An Der Ruhr, Germany Resonance and Rotor dynamics Tutorial. GT Paul Cooper, Alstom Power Limited, Rugby, United Kingdom Enhancement of the Rotordynamic Performance of a Shaft Supported by Air Foil Bearings With Vibration Damper GT Behzad Zamanian Yazdi, Daejong Kim, Fangcheng Xu, University of Texas at Arlington, Arlington, TX, United States Influence of Gas Feeding Position on the Performance of Radial-Inflow Hydrostatic Gas Ultra-Short Journal Bearings GT Chao Nie, Xiaojun Yan, Beihang University, Beijing, China, Xia Chen, Beihang University, School of Energy and Power Engineering, Beijing, China 4:00 2nd Quadrant Centrifugal Compressor Performance: Part I GT Elisabetta Belardini, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy, Libero Tapinassi, Marco Pelella, GE Oil & Gas, Florence, FI, Italy Flutter and Forced response GT Sangjoon Shin, Seoul National University, Seoul, Korea (Republic) Assessment of Porous Type Gas Bearings: Measurements of Bearing Performance and Rotor Vibrations GT Luis San Andres, Travis Cable, Yong Zheng, Oscar De Santiago, Drew Devitt 4:30 5:00 2nd Quadrant Centrifugal Compressor Performance: Part II GT Elisabetta Belardini, Rajeev Kumar Pandit, Dante Tommaso Rubino, V V N K Satish Koyyalamudi, Libero Tapinassi Effect of Operating Conditions on the Elasto-Hydrodynamic Performance of Foil Thrust Bearings for Supercritical CO2 Cycles GT Kan Qin, The University of Queesnland, Brisbane, QLD, Australia, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia, Peter Jacobs, The University of Queesnland, Brisbane, QLD, Australia Performance Measurements of Gas Bearings With High Damping Structures of Polymer and Bump Foil via Electric Motor Driving Tests and MA-1-DOF Shaker Dynamic Loading Tests GT Kyuho Sim, Jisu Park, Seoul National University of Science and Technology, Seoul, Korea (Republic) 80 ASME 2016 TURBO EXPO

81 TUESDAY, JUNE 14 2:30-5:30 PM STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS Damping Methodologies and Damping Estimation sco2 Power Cycle Path Forward Active Flow Control Paper Session Room 307C TC-32-8 Panel Session Room 402 TC-36-7 Paper Session Room 318C TC Session Chair: Malte Krack, University of Stuttgart Session Co-Chair: Bogdan Epureanu, University of Michigan Session Chair: Richard Dennis, US Dept Of Energy Session Co-Chair: Eric Clementoni, Bechtel Marine Propulsion Corporation Session Chair: Kishore Ramakrishnan, GE Global Research Session Co-Chair: David B. Stephens, NASA Glenn Research Center 2:30 Modal Identification of Dynamically Coupled Bladed Disks in Run-Up Tests GT Luigi Carassale, University of Genova, Genova, Italy, Michela Marrè-Brunenghi, Ansaldo Energia, Genova, Italy, Stefano Patrone, Ansaldo Sviluppo Energia, Genova, Italy Perspective on the S-CO2 power system future market and new technologies to accelerate the commercialization GT Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic) Experimental Study on the Use of Synthetic Jet Actuators for Lift Control GT Ricardo Torres, Solar Turbines, San Diego, CA, United States, Gustaaf Jacobs, San Diego State University, San Diego, CA, United States, Michael Cave, Solar Turbines, San Diego, CA, United States 3:00 3:30 A Practical Approach for Evaluation of Equivalent Linear Damping From Measurements of Mistuned and/or Non-Linear Stages and Forced Response Validation GT Dr. Andreas Hartung, MTU Aero Engines AG, München, Germany, Dr. Hans-Peter Hackenberg, MTU Aero Engines AG, Munich, Germany Parametrically Induced Damping in a Cracked Rotor GT Zbigniew Kulesza, Bialystok University of Technology, Bialystok, Poland, Jerzy Sawicki, Cleveland State University, Cleveland, OH, United States GE Perspective on sco2 Power Cycle Development Path GT Douglas Hofer, GE Global Research, Niskayuna, NY, United States Heatric Perspective on sco2 Power Cycle Development Path GT Dereje Shiferaw, Heatric, Poole, United Kingdom Tip Leakage Vortex Control in a Low Speed Axial Compressor Using Pulsed Plasma Actuation GT Yun Wu, Xi An Jiaotong University, Xi an,shaanxi, China, Cai-dong Ma, Air Force Engineering University, Xi an, Non-US Resident, China, Simeng TIAN, Xi an Jiaotong University, Xi an, Xi an,shaanxi, China, Youtian Zhou, Jun Li, Ying-hong Li, Air Force Engineering University, Xi an, China Endwall Secondary Flow Control in a High Speed Compressor Cascade With Vortex Generator Jets GT Huaping Liu, Deying Li, Bingxiao Lu, Menghan Yu, Harbin Institute of Technology, Harbin, Heilongjiang, China 4:00 A Comparative Study on the Dynamic Characteristics of Bladed Disks With Piezoelectric Network and Piezoelectric Shunt Circuit GT Jiuzhou LIU, Lin LI, Pengcheng DENG, Chao LI, Beihang University, Beijing, China SwRI Perspective on sco2 Power Cycle Development Path GT Klaus Brun, Southwest Research Institute, San Antonio, TX, United States 3D Unsteady Simulation of a Low Speed Low-Reaction Aspirated Compressor GT Longxin Zhang, Xin Du, Harbin Institute of Technology, Harbin, China, Xun Liu, Department of gas turbine, NO.703 research institute of CSIC, Harbin, Heilongjiang, China, Songtao Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China 4:30 Impulse Mistuning of Blades and Vanes GT Dr. Andreas Hartung, MTU Aero Engines AG, München, Germany, Dr. Ulrich Retze, Dr. Hans-Peter Hackenberg, MTU Aero Engines AG, Munich, Germany Experimental Investigations on Highly Loaded Compressor Airfoils With Active Flow Control Under Non-Steady Flow Conditions in a 3D-Annular Low-Speed Cascade GT Christian Brück, Christine Tiedemann, Dieter Peitsch, 5:00 assive Control of Critical Speeds of a Rotating Shaft Using Eccentric Sleeves: Model Development GT Antony Kirk, Jonathan Griffiths, Chris Bingham, Grahame Knowles, Ron Bickerton, University of Lincoln, Lincoln, United Kingdom Experimental Study and Vortex Analysis in a Linear Compressor Cascade With Active Flow Control GT Simeng TIAN, Yun Wu, Yangyang WU, Zhibo ZHANG, Bangqin Cheng, Ying-hong Li FINAL PROGRAM 81

82 TUESDAY, JUNE 14 2:30-5:30 PM TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS TURBOMACHINERY: MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION & UNCERTAINTY QUANTIFICATION Methods and CFD Modeling for Turbomachinery Design Radial Compressors - Performance Optimization (III) Axial Compressor Design Paper Session Room 327 TC-39-2 Paper Session Room E4 TC-42-5 Paper Session Room E1 TC-45-2 Session Chair: Jochen Gier, MTU Session Co-Chair: Sunil Patil, ANSYS Inc Session Chair: Peter Harley, IHI Charging Systems Session Co-Chair: Jason Walkingshaw, IHI Charging Systems International Session Chair: Stéphane Hiernaux, Safran Group - Techspace Aero 2:30 Flow Pattern Evolution and Energy Decomposition of Flows at Different Operating Conditions in a Hydrodynamic Torque Converter GT Wei Wei, Mingxing Huang, Qingdong Yan, Yu Li Mechanism and Flow Control on the Mismatching of Impeller and Vaned Diffuser Caused by Inlet Prewhirl for Centrifugal Compressors GT Qiangqiang Huang, Xinqian ZHENG, Aolin Wang, Tsinghua University, Beijing, China Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor GT Tao Ning, Chunwei Gu, Tsinghua University, Beijing, China, Xiao-tang Li, Taiqiu Liu, Shenyang Engine Design and Research Institute, Shenyang, China 3:00 A 3D Approximate Riemann Solver for the Euler Equations Using Flux Splitting Schemes With a Robust Multigrid GT Hong-Sik Im, Honeywell, Torrance, CA, United States Investigation of Vaned Diffuser Splitters on the Performance of a and Flow Control High Pressure Ratio Centrifugal Compressor GT Xiao He, Xinqian ZHENG, Jie Wei, Hanxuan Zeng, Tsinghua University, Beijing, China Flow Characteristics of an Optimized Axial Compressor Rotor Using Smooth Design Parameters GT Syed Moez Hussain Mahmood, Mark Turner, Kiran Siddappaji, University of Cincinnati, Cincinnati, OH, United States 3:30 4:00 4:30 3D Viscous Inverse Design of Turbomachinery Using One-Equation Turbulence Model GT Jinguang Yang, Yan Liu, Xiaofang Wang, Dalian University of Technology, Dalian, Liaoning, China, Hu Wu, Northwestern Polytechnical University, Xi an, Shaan xi, China 3D CFD Compressor Map Computation of a Multi-Stage Axial Compressor With Off-Design Adjusted Rotor Geometries GT Christian Janke, Rolls-Royce Deutschland, Blankenfelde-Mahlow, Dahlewitz, Germany, Ivo Martin, Lilia Gaun, Dieter Bestle, Brandenburg University of Technology Cottbus-Senftenberg, Cottbus, Germany, Markus Goller, Rolls-Royce Deutschland Ltd. & Co. KG, Blankenfelde-Mahlow, Dahlewitz, Germany Experimental Study on the Effect of Diffuser Vane Setting Angle on Centrifugal Compressor Performance GT Hideaki Tamaki, IHI Corporation, Yokohama, Japan Area-Schedule Based Design of High Pressure Recovery Radial Diffusion Systems GT Ruhou Gao, Zoltan Spakovszky, Mass Inst of Tech, Cambridge, MA, United States, Daniel Rusch, ABB Turbo Systems Ltd, Baden, Switzerland, René Hunziker, ABB Turbo Systems, Baden, Switzerland Study of Geometric Parameter Influence on Fishtail Pipe Diffuser Performance GT Ge Han, Xingen Lu, Yanfeng Zhang, Shengfeng Zhao, Chengwu Yang, Junqiang Zhu, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, Beijing, China Inverse Design of Axial-Flow Compressor Blades Using Elastic Surface Algorithm in Subsonic and Transonic Flow Regimes With Separation GT Mohammad Hossein Noorsalehi, Isfahan University of Technology, Isfahan, Iran, Mahdi Nili-Ahamadabadi, Isfahan University of Technology, Esfahan, Iran, Ebrahim Shirani, Foolad Institute of technology, Isfahan, Iran, Maryam Safari, Isfahan University of Technology, Isfahan, Iran Optimization of Robust Transonic Compressor Blades GT Marcus Lejon, Niklas Andersson, Chalmers University of Technology, Gothenburg, Sweden, Lars Ellbrant, Hans Mårtensson, GKN Aerospace, Trollhattan, Sweden, Tomas Grönstedt, Chalmers University, Gothenburg, Sweden 5:00 Comparison of Different Numerical Approaches for Determination of Compressible Fluid Flow in Narrow Gaps GT Alexander Kefalas, Friedrich-Karl Benra, Dieter Brillert, Hans Josef Dohmen Radial Stages with Non-Uniform Pressures at Diffuser Inlet GT David Japikse, Concepts NREC, White River Junction, VT, United States, Eric Krivitzky, ConceptsNREC, White River Junction, VT, United States Geometric Modeling and Analysis for Gooseneck GT Qiuye Tu, Dongdong Zhang, Jie Chen, Yuanhu Cai 82 ASME 2016 TURBO EXPO

83 TUESDAY, JUNE 14 2:30-5:30 PM WIND ENERGY Vertical Axis Wind Turbines Paper Session Room 308A TC-46-2 Session Chair: Jaikumar Loganathan, GE Global Research Session Co-Chair: Abolfazl Pourrajabian, K N Toosi Univ of Technology 2:30 Computational Investigation of a Shrouded Vertical Axis Wind Turbine GT Antonios Tourlidakis, University of Western Macedonia, Nea Michaniona, Kozani, Greece, Kyriakos Vafiadis, Harris Fintikakis, Ioannis Zaproudis, University of Western Macedonia, Kozani, Kozani, Greece 3:00 Effects of Airfoil s Polar Data in the Stall Region on the Estimation of Darrieus Wind Turbine Performance GT David Marten, George Pechlivanoglou, Christian Navid Nayeri, Christian Oliver Paschereit, Alessandro Bianchini, Francesco Balduzzi, Giovanni Ferrara, Lorenzo Ferrari 3:30 4:00 4:30 5:00 Aerodynamics of Darrieus Wind Turbines Airfoils During Start-Up GT Alessandro Bianchini, Univ of Florence, Firenze, Italy, Francesco Balduzzi, University of Florence, Florence, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fiorentino (FI), Italy Influence of the Blade-Spoke Connection Point on the Aerodynamic Performance of Darrieus Wind Turbines GT Alessandro Bianchini, Univ of Florence, Firenze, Italy, Francesco Balduzzi, University of Florence, Florence, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fiorentino (FI), Italy Three-Dimensional Character of VAWT Wakes: An Experimental Investigation for H-Shaped and Troposkien Architectures GT Giacomo Persico, Vincenzo Dossena, Berardo Paradiso, Politecnico Di Milano, Milano, Italy, Lorenzo Battisti, Università di Trento, Povo (TN), Italy, Alessandra Brighenti, Enrico Benini, Università di Trento, Trento, Italy Design and performance evaluation of an economical vertical axis wind turbine GT Abdelghani Himri, ENSEEIHT, Toulouse, France, Emil Göttlich, Graz University of Technology, Graz, Austria FINAL PROGRAM 83

84 WEDNESDAY, JUNE 15 9:00-10:30 AM COAL, BIOMASS & ALTERNATIVE FUELS COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS Biomass and Coal Combustion Modeling: Model Development Combustion Dynamics: High-frequency Instabilities Paper Session Room E6 WA- 3-1 Paper Session Room 317C WA-4-22 Paper Session Room E3 WA-4-33 Session Chair: Domenico Borello, Università di Roma Sapienza Session Co-Chair: Yuxin Zhang, GE Global Research Session Chair: Michael Duesing, ANSALDO ENERGIA Session Co-Chair: A. C. Benim, Duesseldorf University of Applied Sciences Session Chair: Lipika Kabiraj, Chair of Fluid Dynamics, ISTA, TU Berlin Session Co-Chair: Aditya Saurabh, Institut Für Strömungsmechanik Und Technische Akustik 9:00 Review of Coal-to-Synthetic Natural Gas (SNG) Production Methods and Modeling of SNG Production in an Entrained-Flow Gasifer GT Xijia Lu, Ting Wang, University of New Orleans, New Orleans, NC, United States Assessment of Scale Resolved CFD Methods for the Investigation of Lean Burn Spray Flames GT Antonio Andreini, Davide Bertini, Lorenzo Mazzei, Stefano Puggelli, University of Florence, Florence, Italy Low-Order Modeling of Nonlinear High-Frequency Transversal Thermoacoustic Oscillations in Gas Turbine Combustors GT Tobias Hummel, Klaus Hammer, Pedro Romero, Technische Universitaet Muenchen, Garching, Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany 9:30 Externally Fired Gas Turbine: Layout Optimization for Micro CHP Generation With Residual Biomass Firing GT mauro zampilli, University of Perugia - Dep. of Engineering, perugia, Italy, Gianni Bidini, Univ Di Perugia, Perugia 06125, Italy, Paolo Laranci, University of Perugia - Dep. of Engineering, Perugia, Italy, Francesco Fantozzi, University of Perugia, Dip. Ingegneria Industriale, Perugia, Italy Investigation of Single Jet Combustor Using Flamelet Generated Manifold Combustion Model and Detailed Chemistry GT Sunil Patil, ANSYS Inc, Ann Arbor, MI, United States, Joseph Meadows, Siemens Energy, Inc., Charlotte, NC, United States, Judy Cooper, ANSYS Inc., Waterloo, ON, Canada, Richard Valdes, Siemens Energy, Inc., Orlando, FL, United States, Stefano Orsino, ANSYS, Lebanon, NH, United States, Walter R. Laster, Siemens Energy, Orlando, FL, United States High-Frequency Thermoacoustic Modulation Mechanisms in Swirl-Stabilized Gas Turbine Combustors: Part Two: Modeling and Analysis GT Tobias Hummel, Technische Universitaet Muenchen, Garching, Germany, Frederik M. Berger, Technical University of Munich, Garching, Germany, Michael Hertweck, Technische Universitaet Muenchen, Garching, Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany 10:00 The Potential for Gasification to Reduce CO2 Emissions in Coal Power Generation GT Jeffrey N. Phillips, Electric Power Research Institute, Charlotte, NC, United States, George Booras, EPRI, Palo Alto, CA, United States Parallelized Automated, Predictive, Imprint Cooling Model for Combustor Liners GT Alejandro Briones, University of Dayton Research Institute, Dayton, OH, United States, Brent Rankin, Air Force Research Laboratory, Dayton, OH, United States, Scott Stouffer, Universty of Dayton Research Institute, Dayton, OH, United States, Timothy Erdmann, David Burrus, Innovative Scientific Solutions, Inc., Dayton, OH, United States High Frequency Thermoacoustic Modulation Mechanisms in Swirl-Stabilized Gas Turbine Combustors: Part One: Experimental Investigation of Local Flame Response GT Frederik M. Berger, Technical University of Munich, Garching, Germany, Tobias Hummel, Michael Hertweck, Technische Universitaet Muenchen, Garching, Germany, Jan Kaufmann, Technical University of Munich, Garching, Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany 84 ASME 2016 TURBO EXPO

85 WEDNESDAY, JUNE 15 9:00-10:30 AM CYCLE INNOVATIONS HEAT TRANSFER: CONJUGATE HEAT TRANSFER HEAT TRANSFER: NUMERICAL FILM COOLING ORC & mgt Novel Cycles Conjugate Methods For Gas Turbine Applications Numerical Film Cooling II Paper Session Room 317A WA-6-2 Paper Session Room 301 WA-10-3 Paper Session Room 307A WA-12-2 Session Chair: Kihyung Kim, GE Power and Water Session Co-Chair: Mariam Mahmood, University of Genoa Session Chair: Robert Proctor, GE Aviation Session Co-Chair: Sergio Lavagnoli, Von Karman Inst for Fluid Dynamics Session Chair: Thomas Dyson, GE Global Research, Niskayuna Session Co-Chair: Cengiz Camci, Penn State University 9:00 Introduction of a New Numerical Simulation Tool to Analyze Micro Gas Turbine Cycle Dynamics GT Martin Henke, German Aerospace Centre (DLR), Stuttgart, Germany, Thomas O. Monz, German Aerospace Center (DLR e.v.), Stuttgart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technology, Stuttgart, Germany Analysis of Conjugate Heat Transfer Between Cooling Film and Thermal Barrier Coatings Based on Micro-Structure GT Yuzhang Wang, Jiali Li, Hongzhao Liu, Yiwu Weng, Shanghai Jiao Tong University, Shanghai, China Influence of Jet Impingement Configurations and Aerothermal Variables on Film Cooling GT Xing Yang, Xi An Jiaotong University, Shaanxi, China, Zhao Liu, Xi an Jiaotong University, Xi An, China, Zhansheng Liu, Bin Wu, Xi an Jiaotong Univeristy, Xi an, Shaanxi, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China 9:30 Exhaust Gas Recirculation on Humidified Flexible Micro Gas Turbines for Carbon Capture Applications GT Ward De Paepe, Marina Montero Carrero, Vrije Universiteit Brussel, Brussels, Belgium, Simone Giorgetti, Université Libre de Bruxelles, Brussel, Belgium, Svend Bram, Vrije Universiteit Brussel, Brussels, Belgium, Alessandro Parente, Universite Libré de Bruxelles, Brussels, Belgium, Francesco Contino, Vrije Universiteit Brussel, Brussels, Belgium Conjugate Heat Transfer of a Gas Turbine With Hub and Shroud Cavity Flow GT Yuge An, Beihang Univ., Schl of Energy and Pwr Eng., Beijing, Beijing, China, Huoxing Liu, Beihang university, Beijing, China An Innovative Approach to Model Temperature Influence on Particle Deposition in Gas Turbines GT Paolo Venturini, Dipartimento di Meccanica e Aeronautica, Sapienza, Roma, Italy, Domenico Borello, Università di Roma Sapienza, Rome, Italy, Franco Rispoli, Sapienza University of Rome, Rome, Italy, G. Agati, sapienza University Of Rome, Rome, RM, Italy 10:00 Experimental Characterisation of a Humidified T100 Micro Gas Turbine GT Marina Montero Carrero, Ward De Paepe, Vrije Universiteit Brussel, Brussels, Belgium, Jan Magnusson, Ecergy AB, Morarp, Sweden, Svend Bram, Vrije Universiteit Brussel, Brussels, Belgium, Alessandro Parente, Universite Libré de Bruxelles, Brussels, Belgium, Francesco Contino, Vrije Universiteit Brussel, Brussels, Belgium Large Eddy Simulation of Conjugate Heat Transfer Around a Multi-Perforated Plate With Deviation GT Dorian Lahbib, TURBOMECA-CERFACS, Bordes, France, Antoine Dauptain, Florent Duchaine, CERFACS, Toulouse, France, Franck Nicoud, Université de Montpellier 2, Montpellier, France Effects of Oscillations in the Main Flow due to Thermo Acoustic Fields in a Gas Turbine Combustor on Film Cooling GT Seung Il Baek, Pennsylvania State University, University Park, PA, United States, Savas Yavuzkurt, Dept. of Mech. and Nuc. Engr./Pennsylvania State University, University Park, PA, United States FINAL PROGRAM 85

86 WEDNESDAY, JUNE 15 9:00-10:30 AM HEAT TRANSFER: EXPERIMENTAL INTERNAL COOLING MANUFACTURING MATERIALS & METALLURGY OIL & GAS APPLICATIONS Experimental Internal Cooling: Ribbed Channels Scholarly Lecture on Welding and Brazing Technologies System Integration and Operation Paper Session Room 307B WA-16-4 Tutorial Session Room 402 WA-21-9 Paper Session Room 401 WA-24-7 Session Organizer: Karen Thole, Pennsylvania State Univ Session Co-Organizer: Lesley Wright, Baylor University Session Chair: Paul Lowden, Liburdi Turbine Services Session Chair: Klaus Brun, Southwest Research Institute 9:00 Heat Transfer and Flow Characteristics of Two-Pass Parallelogram Channels WithAttached and Detached Transverse Ribs GT Tong Miin Liou, National Tsing Hua Univsity, Hsinchu, Taiwan, Shyy Woei Chang, National Kaohsiung Marine University, Kaohsiung, Taiwan, Yi-An Lan, NTHU, Kaohsiung City, Taiwan, Shu-Po Chan, National Tsing Hua University, Xinfeng Township Hsinchu, Taiwan, YUSHUAI LIU, Imperial College, London, United Kingdom Scholarly Lecture on Welding and Brazing Technologies GT Warren Miglietti, ProEnergy, Sedalia, MO, United States T Gas Turbine Operation Offshore: Increased Operating Interval and Higher Engine Performance Through Optimized Intake Air Filter System GT Stian Madsen, Statoil, Stavanger, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway 9:30 10:00 Experimental Study of Heat Transfer in a Converging Duct With Ribs GT Wei-jiang Xu, Pei-yao Zhang, Xiao-fei Ma, Northwest Polytechnical University, Xi'an, Shaanxi Province, China, Hui-ren Zhu, Li Zhang, Northwestern Polytechnical University, Xi an, China Aerothermal Investigation of the Flow and Heat Transfer in a Helically Corrugated Cooling Channel GT Ignacio Mayo, Bogdan C. Cernat, Marco Virgilio, von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium, Tony Arts, Von Karman Inst, Rhode St Genese, Belgium, Alessio Pappa, Von Karman Institute For Fluid Dynamics, Rhode Saint Genese, Belgium U T O R I A L Two years of improvement and experience in PEMS for gas turbines GT Francis Bainier, Grtgaz, Bois Colombes, France, Pascal Alas, GRT Gaz, Bois-Colombe, France, Tony Pillay, Galéo, Cluis, France, Florian Morin, GRTgaz, Bois Colombes, France Successful start-up and operation of 3 Propylene Boil-off gas compressors Technical Presentation Only. GT Joppu Thomas, ADNOC, ABUDHABI,., United Arab Emir. Coordinated Operation of Centrifugal Compressors in Series via Model Predictive Control GT Mehmet Mercangöz, ABB Corporate Research, Baden-Dättwil, Aargau, Switzerland, Andrea Stefani, Maserati, Modena, Italy, Andrea Cortinovis, ABB Corporate Research, Baden, Switzerland 86 ASME 2016 TURBO EXPO

87 WEDNESDAY, JUNE 15 9:00-10:30 AM OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: PROBABILISTIC METHODS Compression System Dynamics Steam Turbine Seals Probabilistic Method Developments Tutorial Session Room E5 WA Paper Session Room E2 WA-26-6 Tutorial Session Room 308B WA-29-2 Session Chair: Rainer Kurz, Solar Turbines Incorporated Session Co-Chair: Jeff Moore, Southwest Research Institute, Klaus Brun, Southwest Research Institute Session Chair: Alexander Stein, GE Energy Infrastructure Session Co-Chair: Grant Ingram, Durham University, Durham Session Chair: Michael Gorelik, FAA Session Co-Chair: Liping Wang, GE Corporate Res & Develop 9:00 T Experimental and Numerical Development of a Dynamic Clearance Seal for Steam Turbine Application GT Andrew Messenger, Richard Williams, Grant Ingram, Durham University, Durham, United Kingdom, Simon Hogg, School of Engineering, Durham, United Kingdom, Stacie Tibos, GE Power, Rugby, United Kingdom, Jon Seaton, GE Power, Steam Power Systems, Rugby, United Kingdom, Bernard Charnley, GE Power, Steam Power Systems, Warwickshire, United Kingdom Demystify Gradient-Enhanced Kriging Emulation in Uncertainty Quantification Technical Presentation Only. GT Peter Qian, University of Wisconsin-Madison, Madison, WI, United States U 9:30 T O R Influence of Shroud Seal Dimensions on Aerodynamic Performance of Steam Turbine Stages: Part I - Honeycomb Seal GT Xin Yan, Xiuxiu Chen, Kun He, Xi an Jiaotong University, Xi an, Shaanxi Province, China Bayesian uncertainty analysis of the median rank regression method for analysing right-censored data Technical Presentation Only. GT Nicholas Armstrong, Aerospace Division, Fisherman s Bend, Victoria, Australia I 10:00 A L Influence of Shroud Seal Dimensions on Aerodynamic Performance of Steam Turbine Stages: Part II Hole-Pattern Seal GT Xin Yan, Xiuxiu Chen, Kun He, Xi an Jiaotong University, Xi an, Shaanxi Province, China A probabilistic comparison of turbine blade failure data from two independent aircraft fleets Technical Presentation Only. GT Nicholas Armstrong, Glen Rowlinson, Aerospace Division, Fisherman s Bend, Victoria, Australia, Ross A. Antoniou, DST Group, Fishermans Bend, Victoria, Australia FINAL PROGRAM 87

88 WEDNESDAY, JUNE 15 9:00-10:30 AM STRUCTURES & DYNAMICS: ROTORDYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS Bearings - Modeling & Validation 3 Dynamics of Bladed Disks Multistage Compressors Paper Session Room 300 WA Paper Session Room 307C WA-32-7 Paper Session Room 318C WA-37-8 Session Chair: Martin Conlon, National Research Council Canada Session Co-Chair: Ilmar Ferreira Santos, Technical University of Denmark Session Chair: Alain Batailly, École Polytechnique de Montréal Session Co-Chair: Muzio Gola, Politecnico di Torino Session Chair: Lisa Brilliant, UTC/Pratt & Whitney Session Co-Chair: Matthew Bennington, Pratt & Whitney 9:00 The Influence of Hydrodynamic Bearing Configuration on Morton Effect GT Xiaomeng Tong, Alan Palazzolo, Texas A&M University, College Station, TX, United States Automated Mode Identification of Airfoil Geometries to Be Used in an Optimization Process GT Ivo Martin, Dieter Bestle, Brandenburg University of Technology Cottbus-Senftenberg, Cottbus, Germany Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-Compressor GT Jan Siemann, Gottfried Wilhelm Leibniz Universitaet Hannover, Hannover, Germany, Ingolf Krenz, MTU Aero Engines AG, Munich, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany 9:30 Design of Hybrid Hydrostatic/Hydrodynamic Journal Bearings for Optimum Self-Compensation Under Misaligning External Loads GT Luis Fernando Martinez Esparza, Embry Riddle Aeronautical University-Worldwide, Chinle, AZ, United States, Jaime Cervantes de Gortari, National University of Mexico, Mexico City, Mexico, Enrique Chicurel Uziel, National University of Mexico, Distrito Federal, Mexico Rational Design of Gas Turbine Engine Compressor to Provide the Required Dynamic Strength Level of Rotor Blades GT Daria Kolmakova, Grigorii Popov, Aleksandr Shklovets, Aleksandr Ermakov, Samara State Aerospace University, Samara, Russia Influence of Tip Clearance on the Performance and Matching of Multistage Axial Compressors GT Xinqian ZHENG, Heli Yang, Tsinghua University, Beijing, China 10:00 Design and Calibration of a Full Scale Active Magnetic Bearing Based Test Facility for Investigating Rotordynamic Properties of Turbomachinery Seals in Multiphase Flow GT Andreas Jauernik Voigt, Christian Mandrup-Poulsen, Technical University of Denmark, Kgs. Lyngby, 2800, Denmark, Kenny Krogh Nielsen, Lloyds Register Consulting, Hellerup, Denmark, Ilmar Ferreira Santos, Technical University of Denmark, Kgs. Lyngby, Denmark Mechanical Integrity and Design Analysis Suite (MIDAS): A Tool for Rapid Finite Element Analysis (FEA) of Steam Turbine Blades GT Periklis Lolis, Trevor Brown, Cesare Guardino, GE Power, Rugby, Warwickshire, United Kingdom, Jonathan Henson, GE Power, Stafford, United Kingdom Influence of Rotor Tip Flow Field Mis-Prediction on Rotating Disturbance Near Surge in a High Speed Multistage Compressor GT Johannes Schreiber, LMFA - Ecole Centrale de Lyon - Centrale Innovation, LYON, France, Xavier Ottavy, CNRS - LMFA, Ecully, France, Ghislaine Ngo Boum, Ecole Centrale de Lyon-LMFA, Ecully, France, Nicolas Gourdain, ISAE, Aerodynamics, Energetic and Propulsion Department, Toulouse CEDEX 4, France 88 ASME 2016 TURBO EXPO

89 WEDNESDAY, JUNE 15 9:00-10:30 AM TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: DUCTS & COMPONENT INTERACTIONS Turbine Cascade Aerodynamics Compresor Methods and Applications Fan and Compressor Noise Paper Session Room 327 WA Paper Session Room E4 WA Paper Session Room 403 WA-41-2 Session Chair: Shankar Magge, Pratt and Whitney Session Co-Chair: Chao Zhou, Peking University Session Chair: Michael Hathaway, NASA Glenn Research Center Session Co-Chair: Garth V. Hobson, Naval Postgraduate School Session Chair: Andreas Peters, GE Aviation Session Co-Chair: Claudio Lettieri, TU Delft 9:00 Influence of Trailing Edge Coolant Ejection Rate and Cut-Back Length on Energy Loss and Shockwave Intensity of a Transonic Turbine Blade GT Yufeng Wang, Xun Zhou, Harbin Institute of Technology, Harbin, Heilongjiang, China, Xun Liu, Department of gas turbine, NO.703 research institute of CSIC, Harbin, Heilongjiang, China, Songtao Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China Computational Analysis of Compressor Blade Erosion in a Wet Compression System GT Palanikumar Chidambaram, Tae-Hoon Song, In-Won Kim, Kwon-Hee Lee, FMTRC, Daejoo Machinery Co Ltd.,, Daegu, Korea (Republic), Heuy- Dong Kim, Andong National Univeristy, Andong, Korea (Republic) Numerical Investigation of the First Booster Stage Tone Noise of a High Bypass Ratio Turbofan GT Anton Rossikhin, Victor Mileshin, Sergey Pankov, Central Institute of Aviation Motors, Moscow, Russia 9:30 Experimental Investigation on the Annular Sector Cascade of a High Endwall-Angle Turbine GT Weiliang Fu, Harbin Engineering University, Harbin/Heilongjiang, China, Jie Gao, Harbin Engineering University, Harbin, China, Chen Liang, Harbin Marine Boiler and Turbine Research Institute, Harbin/Heilongjiang, China, Fukai Wang, Qun Zheng, Endong Zhou, Harbin Engineering University, Harbin/Heilongjiang, China Correlation-Based Riblet Model for Turbomachinery Applications GT Viktor Köpplin, Leibniz Universität Hannover, Hannover, Germany, Florian Herbst, Gottfried Wilhelm Leibniz Universitaet Hannover, Hannover, Niedersachsen, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany Analysis of the Sources and the Modal Content of the Acoustic Field in a Radial Compressor Outflow GT Marius Banica, Peter Limacher, ABB Turbo Systems AG, Baden, Aargau, Switzerland, Heinz-Juergen Feld, ABB Turbo Systems Ltd, Baden, Aargau, Switzerland 10:00 Experimental Investigation of Effects of Rim Sealing Flow on the Flow Field in a Turbine Cascade Passage With Different Rim Seal Configurations GT Lixiang Wang, Hongwei Ma, Beihang University, Beijing, China, Jinghui Zhang, Xi an Aerospace Propulsion Institute, Xi an, China A New Three-Dimensional Viscous Inverse Design Method for Axial Compressor Blade GT Zhaowei Liu, Hu Wu, Northwestern Polytechnical University, Xi an, China Numerical and Experimental Investigation of Noise Radiation for Double-Suction Centrifugal Fans of Air-Conditioner Indoor Unit GT Xifeng Zhao, Hisense Air-conditoner R&D Center, Hisense (Shandong) Air-conditoner Co. Ltd., Qingdao, China, jinju sun, xi an jiaotong univ, xian, China, Youwei He, xian jiaotong uinv, xian, China, Kang Lin, xian Jiaotong Univ., xian, China FINAL PROGRAM 89

90 WEDNESDAY, JUNE 15 9:00-10:30 AM TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS WIND ENERGY Radial Compressors - Performance Optimization (II) Wind Turbine Design and Optimization Paper Session Room E1 WA-42-4 Paper Session Room 308A WA-46-6 Session Chair: Hideaki Tamaki, IHI Corporation Session Co-Chair: Peter Harley, IHI Charging Systems Session Chair: George Pechlivanoglou, HFI TU Berlin Session Co-Chair: Aya Diab, Faculty of Engineering - Ain Shams University 9:00 Numerical Investigation of the Effect of Diffuser and Volute Design Parameters on the Performance of a Centrifugal Compressor Stage GT Lei Yu, United Technologies Research Center (China), Shanghai, China, William Cousins, United Technologies Research Center, Glastonbury, CT, United States, Feng Shen, United Technologies Research Center [China] Ltd., Shanghai, Shanghai, China, Georgi Kalitzin, United Technologies Research Center, East Hartford, CT, United States, Vishnu Sishtla, UTC Climate Controls & Security, Manlius, NY, United States, Om Sharma, United Technologies Research Center, East Hartford, CT, United States Strategic Blade Shape Optimization for Aerodynamic Performance Improvement of Wind Turbine GT Youjin Kim, Institute of Fluid Mechanics, FAU Erlangen-Nuernberg, Erlangen, Germany, Ali Al-Abadi, Institute of Fluid Mechanics/ FAU Erlangen-Nuernberg, Erlangen, Germany, Antonio Delgado, Institute of Fluid Mechanics, FAU Erlangen-Nuernberg, Erlangen, Germany 9:30 NUMERICAL INVESTIGATION OF THE FLOW FIELD AND AERODYNAMIC LOAD ON IMPELLERS IN CENTRIFU- GAL COMPRESSOR WITH DIFFERENT RADIAL INLETS GT jianchi xin, Xiaofang Wang, Lusheng Zhou, Dalian University of Technology, Dalian, China, zhong ye, Hangzhou steam turbine LTD, hangzhou, China, Haitao Liu, Dalian University of technology, Dalian, Not Applicable, China Design Optimization of a Utility Scale Wind Turbine Blade Using a Genetic Algorithm GT Aya Diab, Khaled Yassin, Zakaria Ghoneim, Ain Shams University, Cairo, Egypt Flow Characteristics of a Novel Centrifugal Compressor Design GT Shashank Mishra, Shaaban Abdallah, Mark Turner, University of Cincinnati, Cincinnati, OH, United States 10:00 90 ASME 2016 TURBO EXPO

91 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS Simulation and Validation Combustor Design & Development I Combustion Dynamics: Basic Mechanisms Paper Session Room 318B WB-1-6 Paper Session Room E3 WB-4-11 Paper Session Room E5 WB-4-17 Session Chair: Theoklis Nikolaidis, Cranfield University Session Co-Chair: Syed Khalid, Gas Turbine Systems Solutions, LLC Session Chair: Fulvio Magni, GE Power, Baden Session Co-Chair: Federico Bonzani, Ansaldo Sviluppo Energia Session Chair: Christoph Hirsch, TU München Session Co-Chair: Holger Streb, Siemens Power 10:45 Virtual Gas Turbine: Pre-Processing and Numerical Simulations GT Feng Wang, Imperial College London, London, United Kingdom, Mauro Carnevale, Imperial College of London, London, United Kingdom, Gan Lu, Imperial College London, London, United Kingdom, Davendu Kulkarni, Rolls- Royce plc, Derby, United Kingdom, Luca Di Mare, Imperial College, London, United Kingdom Experimental Study of the Interaction of Water Sprays With Swirling Premixed Natural Gas Flames GT Stephan Lellek, TU Munich - Lehrstuhl für Thermodynamik, Garching, Bayern, Germany, Christoph Barfuß, TUM - Lehrstuhl für Thermodynamik, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany The Effect of Chevrons on the Primary and Secondary Swirlers on the Dynamic Behavior of the Flow Generated by a Counter-Rotating Radial-Radial Swirler GT Sheng-Chieh Lin, Wessam Estefanos, James Brennan, Samir Tambe, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States 11:15 11:45 A Noise Assessment Framework for Subsonic Aircraft and Engines GT Fakhre Ali, Chalmers University of Technology, Gothenburg, GOT, Sweden, Lars Ellbrant, GKN Aerospace, Trollhattan, Sweden, Tomas Grönstedt, Chalmers University, Gothenburg, Sweden, David Elmdahl, Chalmers University of Technology, Gothenburg, Sweden Sensitivity Analysis and Experimental Validation of Transient Performance Predictions for a Short-Range Turbofan GT Maria Valentina Culmone, AIRBUS OPERA- TIONS SAS / ISAE, Toulouse, France, Nicolas García Rosa, Institut Supérieur de l'aéronautique et de l'espace, Toulouse, France, Xavier Carbonneau, ISAE, Toulouse, France Experimental Investigation of Spray and Combustion Performances of a Fuel-Staged Low Emission Combustor: Part I: Effects of Main Swirl Angle GT Cunxi Liu, Fuqiang Liu, Jinhu Yang, Yong Mu, Chunyan Hu, Gang Xu, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China Demonstration Plant and Combustion System for an Oxy-Fuel Gas Turbine Cycle GT Inge Saanum, Mario Ditaranto, Alessandro Schönborn, SINTEF Energy research, Trondheim, Norway, Jacek Janczewski, Siemens Industrial Turbomachinery AB, Finspång, Sweden Role of Shear Layer Instability in Driving Pressure Oscillations in a Backward Facing Step Combustor GT Srinivas K. Kirthy, Indian Institute of Science, Bangalore, Karnataka, India, Seunghyuck Hong, Combustion Systems Organization, Aero-Thermal & Mechanical Systems, GE Global Research, New York, NY, United States, Santosh Shanbhogue, Massachusetts Institute of Technology, Cambridge, MA, United States, Ahmed Ghoniem, Massachusetts Inst Of Technology, Cambridge, MA, United States, Santosh Hemchandra, Indian Institute of Science, Bangalore, India Unsteady Heat Release of Stratified Swirling Flames in a Partially Premixed Pre-Vaporized Combustor GT Jing Wang, Xin Hui, Hao Qin, chi zhang, Yuzhen Lin, Beihang University, Beijing, China 12:15 Numerical Simulation of Pollutant Emission of a Turbojet Engine With Water Injection GT Lanxin Sun, Tao Sun, Harbin Engineering University, Harbin, Heilongjiang, China, Yanmin Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China, Wen Yang, Harbin Engineering University, Harbin, Heilongjiang, China Flame Stabilization and Emission Characteristics of a Prototype Gas Turbine Burner at Atmospheric Conditions GT Atanu Kundu, Lund Universitet, SKANE, Sweden, Arman Ahamed Subash, Robert Collin, Lund University, Lund, Skane, Sweden, Jens Klingmann, Lund Universitet, Lund, Sweden On Generation of Entropy Waves by a Premixed Flame GT Lin Strobio Chen, Thomas Steinbacher, Technische Universitaet Muenchen, Garching bei München, Bayern, Germany, Camilo F. Silva, Technische Universität Muenchen, Garching bei München, Bayern, Germany, Wolfgang Polifke, Technische Universität München, Garching, Germany FINAL PROGRAM 91

92 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM COAL, BIOMASS & ALTERNATIVE FUELS COMBUSTION, FUELS & EMISSIONS CYCLE INNOVATIONS HEAT TRANSFER: CONJUGATE HEAT TRANSFER Atomization and Combustion of Liquid Fuels Combustion Dynamics: Instability Analysis II CSP Low Emission Cycles Numerical Internal Cooling: Ribs, Pin Fins, and Pedestals - I Tutorial Session Room 401 WB-3-7 Session Chair: Ajay Agrawal, University of Alabama Paper Session Room E6 WB-4-20 Session Chair: Santosh Hemchandra, Indian Institute of Science Session Co-Chair: Changjin Yoon, GE Global Research Center Paper Session Room 317A WB-6-3 Session Chair: Martina Hohloch, German Aerospace Center Paper Session Room 301 WB-11-2 Session Organizer: Domenico Borello, Università di Roma Sapienza Session Co-Organizer: Giovanna Barigozzi, Universita Di Bergamo 10:45 T Effect of the Diffuser on the Inlet Acoustic Boundary in Combustion-Acoustic Coupled Oscillation GT Xiao Han, Xin Hui, Hao Qin, Yuzhen Lin, Beihang University, Beijing, Beijing, China, Man ZHANG, AVIC Commercial Aircraft Engine CO., LTD, Shanghai, shanghai, China, Chih Jen Sung, University of Connecticut, Storrs, CT, United States Investigation of Different Solar Hybrid Gas Turbines and Exploitation of Rejected Sun Power GT Chris Kalathakis, National Technical University of Athens, Athens, Greece, Nikolaos Aretakis, National Technical University of Athens, Attiki, Greece, Ioannis Roumeliotis, Hellenic Naval Academy, Piraeus, 18539, Greece, Alexios Alexiou, Konstantinos Mathioudakis, National Technical University of Athens, Athens, Greece Gas Turbine Blade Cooling Passage With V and Broken V Shaped Ribs GT Ryoichi Amano, Univ Of Wisconsin-Milwaukee, Glendale, WI, United States, Sourabh Kumar, Jacobs Technology Inc., Tullahoma, TN, United States 11:15 11:45 12:15 U T O R I A L Numerical Analysis of the Dynamic Flame Response and Thermo-Acoustic Stability of a Full-Annular Lean Partially-Premixed Combustor GT Alessandro Innocenti, Antonio Andreini, Bruno Facchini, University of Florence, Florence, Italy, Matteo Cerutti, GE Oil&Gas Nuovo Pignone, Firenze, Italy CFD Analysis of a SGT-800 Burner in a Combustion Rig GT Abdallah Abou-Taouk, Chalmers University of Technology, Gothenburg, Sweden, Daniel Lörstad, Siemens Industrial Turbomachinery, Finspong, Sweden, Niklas Andersson, Lars-Erik Eriksson, Chalmers University of Technology, Gothenburg, Sweden Analysis of Time-Signal of an Industrial Gas Turbine Combustor Under an Unstable Condition GT Davide Lengani, Università degli Studi di Genova, Genoa, Italy, Pietro Zunino, Università di Genova, Genova, Italy, Francesco Romoli, Edoardo Bertolotto, Sergio Rizzo, Ansaldo Sviluppo ENergia, Genoa, Italy High Temperature Storage for CSP Hybrid Gas Turbine: Test Rig Dynamic Analysis and Experimental Validation GT Stefano Barberis, University of Genoa, Genova, Italy, Alberto Nicola Traverso, University of Genova, Genova, Italy, Alberto Traverso, Univ Of Genova, Genova 16145, Italy, Aristide Massardo, Univ Of Genoa, Genova, Italy Assessment Of Solar Steam Injection In Gas Turbines GT Chris Kalathakis, National Technical University of Athens, Athens, Greece, Nikolaos Aretakis, National Technical University of Athens, Attiki, Greece, Ioannis Roumeliotis, Hellenic Naval Academy, Piraeus, 18539, Greece, Alexios Alexiou, Konstantinos Mathioudakis, National Technical University of Athens, Athens, Greece Numerical Investigation on Flow and Heat Transfer in Matrix Cooling Channels for Turbine Blades GT Yigang Luan, Shi Bu, Haiou Sun, Tao Sun, Harbin Engineering University, Harbin, China Effect of Rib Density on Flow and Heat Transfer in an Internal Cooling Passage GT Tomoko Hagari, Kawasaki Heavy Industries, Ltd., Akashi, Japan, Katsuhiko Ishida, Kawasaki Heavy Industries Ltd., Akashi, Hyogo, Japan, Kenichiro Takeishi, Tokushima Bunri University, Sanuki City, Kagawa, Japan, Masaharu Komiyama, Gifu Univ, Gifu, Gifu, Japan, Yutaka Oda, Kansai University, Osaka, Japan Computational Study of the Effect of Inlet Velocity Profile and Rib Orientation on Heat Transfer in Rotating Ribbed Radial Turbine Cooling Passages GT Robert Pearce, University of Oxford, Oxford, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom, Matthew McGilvray, University of Oxford, Oxford, Oxfordshire, United Kingdom, Ed Romero, Rolls Royce plc, Bristol, United Kingdom 92 ASME 2016 TURBO EXPO

93 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM HEAT TRANSFER: NUMERICAL FILM COOLING HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) INDUSTRIAL & COGENERATION Numerical Film Cooling III Hot Gas Ingestion and Rim Seals I Selected Topics Paper Session Room 307A WB-12-3 Paper Session Room 307B WB-15-1 Paper Session Room 318A WB-20-5 Session Chair: Malak Malak, Honeywell International Session Co-Chair: John Clark, Wright Patterson Air Force Base (AFRL), WPAFB Session Organizer: Carl Sangan, University of Bath Session Co-Chair: Jens Fridh, KTH - Royal Institute of Technology Session Chair: Melissa Poerner, Southwest Research Institute Session Co-Chair: Andrea De Pascale, DIN - University Of Bologna Shane Coogan, Southwest Research Institute 10:45 Improving Film Cooling Performance by Saw-Tooth Slot GT Guangchao Li, Zhuang Wu, Shenyang Aerospace University, Shenyang, China, Wei Zhang, Northwestern Polytechnical University, Xian, China, Yukai Chen, Shenyang Aerospace University, Shenyang, China, Cunliang Liu, Northwestern Polytechnical University, Xi An, China Unsteady Flow Phenomena in Turbine Rim Seals GT Paul Beard, Southwell Building,, Oxford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom, Feng Gao, University of Surrey, Guildford, United Kingdom, Kamaljit Chana, University of Oxford, Oxford, OTHER, United Kingdom Energy Analysis of Recuperated Gas Turbine Cycles With Mist Blade Cooling GT Fifi Elwekeel, Helwan University,Faculty of industrial Education, cairo, Egypt, Antar Abdala, Helwan University, Faculty of Engineering, cairo, Egypt, Qun Zheng, Harbin Engineering University, Harbin/Heilongjiang, China 11:15 11:45 12:15 Automated Design Space Exploration of Advanced-Shaped Film Cooling Holes Using the SHERPA Algorithm GT Karsten Kusterer, B&B-AGEMA, Aachen, Germany, Jens Dickhoff, B&B-AGEMA GmbH, Aachen, Germany, Noel Campana, Aachen University of Applied Sciences, Aachen, Germany, Takao Sugimoto, B&B-AGEMA, Aachen, Germany, Ryozo Tanaka, Masahide Kazari, Kawasaki Heavy Industries, LTD., Akashi, Japan, Dieter Bohn, RWTH Aachen University, Aachen, Germany Film Cooling Performance Improvement with Optimized Hole arrangements on Pressure Side Surface of Nozzle Guide Vane - Part I: Optimization & Numerical Investigation GT Sanga Lee, Seoul National University, Seoul, Korea (Republic), Dong-Ho Rhee, Korea Aerospace Research Institute, Daejeon, Korea (Republic), Kwanjung Yee, Seoul National University, Seoul, Korea (Republic), Bongjun Cha, Korea Aerospace Research Institute, Daejeon, Korea (Republic) Film Cooling Performance Improvement With Optimized Hole Arrangements on Pressure Side Surface of Nozzle Guide Vane - Part II: Experimental Validation GT Dong-Ho Rhee, Young Seok Kang, Korea Aerospace Research Institute, Daejeon, Korea (Republic), Jeong-Seek Kang, Turbomachinery Laboratory, University of Notre Dame, Notre Dame, IN, United States, Sanga Lee, Kwanjung Yee, Seoul National University, Seoul, Korea (Republic), Bongjun Cha, Korea Aerospace Research Institute, Daejeon, Korea (Republic) Experiments on Front- and Aft- Disk Cavity Ingestion in a Subscale 1.5-Stage Axial Turbine GT Jagdish Harihara Balasubramanian, Mukilan Michael, Ramendra P Roy, Arizona State University, Tempe, AZ, United States, Yong Kim, Hee-Koo Moon, Solar Turbines Inc, San Diego, CA, United States Comparison of Single and Double Lip Rim Seal Geometry GT Svilen Savov, University of Cambridge, Cambridge, United Kingdom, Nicholas Atkins, Cambridge University, Cambridge, United Kingdom, Sumiu Uchida, Mitsubishi Heavy Industries, Nagasaki, Japan Hot Gas Ingress Estimation Methods Validation in GT Stator-Rotor Cavities by Means of Extensive Field Measurements GT Alessio D Alessandro, Ansaldo Sviluppo Energia, Genova, GE, Italy, Francesco Bavassano, Ansaldo Sviluppo Energia, Genoa, Italy, Michela Marré Brunenghi, Stefano Patrone, Marco Pirotta, Ansaldo Sviluppo Energia, Genova, Italy, Benedetto Santolini, Ansaldo Energia, Genova, Italy, Marco Mantero, Ansaldo Sviluppo Energia, Genova, Genova, Italy Formation Process of Water Film and Performance Effect on Compressor Stage GT Xiaojiang Tian, China Gas Turbine Establishment, Chengdu, China, Hai Zhang, Harbin Engineering University, Harbin, China, Xiaojun Pan, China Academy of Aerospace Aerodynamics, Beijing, China, Jie Zhou, China Gas Turbine Establishment, Chengdu, China, Qun Zheng, Harbin Engineering University, Harbin/Heilongjiang, China Reduction of Turbine Blade Unsteady Forces by Shape Modification of Vanes for Industrial Gas Turbines GT Xiying Niu, Lin Wang, Dongming Li, Qiuli Du, Harbin Marine Boiler and Turbine Research Institute, Harbin/Heilongjiang, China Optimized NOX Control by Injection of Fine Water Spray Into Compressor Discharge GT Steve Ingistov, TESORO/WCC, Carson, CA, United States, Sasa Savic, SS&A, Wettingen, Switzerland FINAL PROGRAM 93

94 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES OIL & GAS APPLICATIONS STEAM TURBINES Turbines: Performance and Novel Concepts Gas Turbine Fouling and Erosion HP/IP Turbines Aerodynamics & Aeromechanical Paper Session Room 308C WB-23-1 Paper Session Room 402 WB-24-4 Paper Session Room E2 WB-26-1 Session Chair: Fabrizio Reale, Istituto Motori, CNR Session Co-Chair: Grant Musgrove, Southwest Research Institute Session Chair: Michele Pinelli, University of Ferrara Session Co-Chair: Tim Allison, Southwest Research Institute Session Chair: Said Havakechian, GE Power (Switzerland) Session Co-Chair: Damian Vogt, University of Stuttgart 10:45 Micro-Turbojet to Turbofan Conversion via Continuously Variable Transmission: Thermodynamic Performance Study GT Kobi Kadosh, Technion - IIT, Haifa, Israel, Beni Cukurel, Technion - Israel Institute of Technology, Technion City - Haifa, Israel Experimental Evaluation of Compressor Blade Fouling GT Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Grant Musgrove, Klaus Brun, Southwest Research Institute, San Antonio, TX, United States Profile Loss Prediction for High Pressure Steam Turbines GT Junhong Cheon, Doosan Skoda Power, Plzen, Czech Republic, Petr Milcak, Ales Pacak, Doosan Skoda Power, Pilsen, Czech Republic, Chungrog Kang, Doosan Heavy Industries and Construction Co., Changwon, Korea (Republic), Miroslav Stastny, University of West Bohemia, Pilsen, Czech Republic 11:15 IMPACT OF SKIN FRICTION, TIP CLEARANCE AND TRAILING EDGE LOSSES ON SMALL SCALE CRYOGENIC AXIAL TURBINE PERFORMANCE GT KHALIL KHALIL, University of Birmingham,,BIRMINGHAM, West Midlands, United Kingdom, Saad Mahmoud, Raya AL-Dadah, Ayad Al Jubori, Kiyarash Rahbar, University of Birmingham, Birmingham, West Midlands, United Kingdom Estimation of the Particle Deposition on a Subsonic Axial Compressor Blade GT Alessio Suman, Università di Ferrara, Ferrara, Italy, Mirko Morini, University of Parma, Parma, Italy, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Nicola Aldi, University of Ferrara, Ferrara, Italy, Klaus Brun, Southwest Research Institute, San Antonio, TX, United States, Michele Pinelli, Pier Ruggero Spina, University of Ferrara, Ferrara, Italy Numerical and Experimental Investigation of Axial Gap Variation in High Pressure Steam Turbine Stages GT Juri Bellucci, University of Florence, Firenze, Italy, Filippo Rubechini, University of Florence, Florence, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Lorenzo Arcangeli, GE Oil & Gas, Florence, Italy, Nicola Maceli, GE Oil&Gas, Firenze, Italy, Berardo Paradiso, Giacomo Gatti, Politecnico di Milano, Milano, Italy 11:45 Influence of Disc Spacing Distance on the Aerodynamic Performance and Flow Field of Tesla Turbines GT Wenjiao Qi, Xi an Jiaotong University, Xi an, Shaanxi, China, Qinghua DENG, Institute of Turbomachinery, Xi an Jiaotong University, Xi an, Shaanxi Province, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China, Qi YUAN, Institute of Turbomachinery, Xi an Jiaotong University, Xi an, Shaanxi, China An Innovative Method for the Evaluation of Particle Deposition Accounting for the Rotor/Stator Interaction GT Nicola Aldi, University of Ferrara, Ferrara, Italy, Mirko Morini, University of Parma, Parma, Italy, Michele Pinelli, Pier Ruggero Spina, University of Ferrara, Ferrara, Italy, Alessio Suman, Università di Ferrara, Ferrara, Italy An Experimental Study of the Aerodynamic Forcing Function in a 1.5 Steam Turbine Stage GT Giacomo Gatti, Paolo Gaetani, Berardo Paradiso, Politecnico di Milano, Milano, Italy, Juri Bellucci, University of Florence, Department of Industrial Engineering, Florence, Italy, Lorenzo Arcangeli, GE Oil & Gas, Florence, Italy, Nicola Maceli, GE Oil&Gas, Firenze, Italy, Vincenzo Dossena, Politecnico Di Milano, Milano, Italy 12:15 Design and Testing Process for a 7kW Radial Inflow Refrigerant Turbine at the University of Queensland GT Hugh Russell, University of Queensland, Brisbane, Queensland, Australia, Andrew Rowlands, The University of Queensland, Brisbane, Australia, Carlos André De Miranda Ventura, University of Cambridge, Department of Engineering - Whittle Laboratory, Cambridge, United Kingdom, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia Modelling of Particle Transport, Erosion and Deposition in Power Plant Gas Paths GT Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Domenico Borello, Università di Roma Sapienza, Rome, Italy, Franco Rispoli, Sapienza University of Rome, Rome, Italy, Giovanni Delibra, Sapienza University of Rome, Rome, Italy, Lucio Cardillo, Sapienza University of Rome, Rome, Italy, A. Salvagni, Sapienza Università di roma, Rome, Roma, Italy, Paolo Venturini, Dipartimento di Meccanica e Aeronautica, Sapienza, Roma, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States Numerical Aerodynamic Damping Evaluation of High-Pressure Steam Turbine Blades for Aeromechanical Characterization GT LORENZO PERUZZI, Università degli studi di Firenze, Florence, Italy, Juri Bellucci, University of Florence, Firenze, Italy, Lorenzo Pinelli, University of Florence, Florence, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Lorenzo Arcangeli, GE Oil & Gas, Florence, Italy, Lorenzo Cosi, Nuovo Pignone (ge Oil & Gas), Florence, Italy, Marco Mazzucco, GE Oil & Gas, Florence, Italy 94 ASME 2016 TURBO EXPO

95 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE PREDICTION STRUCTURES & DYNAMICS: ROTORDYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING Creep and Creep-Fatigue Model Development Bearings -Tilting Pad Bearings Frictional Joints Paper Session Room 300 WB-28-3 Paper Session Room 307C WB-31-3 Paper Session Room 308A WB-32-6 Session Chair: Jonathan Douglas, Frazer-Nash Consultancy Ltd. Session Co-Chair: Dipankar Dua, Siemens Energy Inc., Scott Keller, Power System Manufacturing Session Chair: Ilmar Ferreira Santos, Technical University of Denmark Session Co-Chair: Keun Ryu, Hanyang University, Ansan Session Chair: Dr. Andreas Hartung, MTU Aero Engines AG Session Co-Chair: Christoph Schwingshackl, Imperial College 10:45 An Isothermal Model for Creep Rupture Prediction of Gas Turbine Airfoils With Thickness Effect GT Mamballykalathil Menon, Peter T. Kantzos, Daniel J. Greving, Honeywell International, Phoenix, AZ, United States EXPERIMENTALLY DETERMINE THE IM- PACT OF JACKING-OIL POCKETS ON THE ROTORDYNAMIC CHARACTERISTICS OF A FOUR-PAD, LBP, TILTING-PAD JOUR- NAL BEARING Technical Presentation Only. GT Matthew Kluitenberg, Decagon Devices, Pullman, WA, United States, Dara Childs, Texas A & M Univ, College Station, TX, United States Investigation of Damping Potential of Strip Damper on a Real Turbine Blade GT Mohammad Afzal, Royal Institute of Technology, Stockholm, Sweden, Vsevolod Kharyton, Siemens Industrial Turbomachinary AB, Finspong, Sweden, I. Lopez Arteaga, Leif Kari, Royal Institute of Technology, Stockholm, Sweden 11:15 Comparative Analysis of Stress Relaxation and Creep in a Single-Crystal Superalloy GT Daniel Leidermark, Linköping University, Linkoping, Sweden, Johan Moverare, Linköping University, Linköping, Sweden Development of an Active Control System for Rotating Machinery by Means of Tilting Pad Journal Bearings GT Steven Chatterton, Politecnico di Milano - Dept. Mech. Engineering, Milan, Italy, Filippo Cangioli, Politecnico di Milano, Milan, Italy, Paolo Pennacchi, Politechnico di Milano, Milan, Italy, Andrea Vania, Politecnico di Milano, Milan, Italy, Phuoc Vinh Dang, Politecnico Di Milano - Dept. Mechanical, Milan, OO, Italy Pre Optimization of Asymmetrical Underplatform Dampers GT Chiara Gastaldi, POLITECNICO DI TORINO - DI- MEAS, TORINO, Italy, Muzio Gola, Politecnico di Torino, Torino, Italy 11:45 Creep/Fatigue Tests on Full Scale Hollow Turbine Blades Considering Temperature Gradient GT Cao Chen, Xiaojun Yan, Beihang University, Beijing, China Behavior of TiltingPad - Journal Bearings With Large Machining Error on Pads GT Steven Chatterton, Politecnico di Milano - Dept. Mech. Engineering, Milan, Italy, Phuoc Vinh Dang, Politecnico Di Milano - Dept. Mechanical, Milan, OO, Italy, Paolo Pennacchi, Politechnico di Milano, Milan, Italy, Andrea Vania, Filippo Cangioli, Politecnico di Milano, Milan, Italy Reduced Order Modeling of Bladed Disks With Friction Ring Dampers GT Seunghun Baek, Bogdan Epureanu, University of Michigan, Ann Arbor, MI, United States 12:15 Creep-Fatigue Life Assessment Strategy for Gas Turbine Blades and Vanes: Safe Life Procedure Development, Assessment and Experimental Validation GT Erica Vacchieri, Ansaldo Sviluppo Energia s.p.a., Genoa, Italy, Stuart Holdsworth, EMPA: Materials Science & Technology, Duebendorf, Switzerland, Eleonora Poggio, Ansaldo Sviluppo Energia s.p.a., Genoa, Italy, Paolo Villari, Ansaldo Sviluppo Energia, Genova, Italy, Alessio Costa, Ansalo Energia, Genoa, Italy Development and Validation of an Efficient TEHD Model of Tilting Pad Journal Bearings GT Enrico Meli, Roberto Conti, Amedeo Frilli, Daniele Nocciolini, Simone Panconi, Luca Pugi, Andrea Rindi, Stefano Rossin, Increased Load Carrying Capacity of Large Tilting-Pad Journal Bearings by Injection of Cold Oil GT Nico Buchhorn, Sebastian Kukla, Beate Bender, Modeling Microslip in Flange Joints and Its Effects on the Dynamics of Multi-Stage Bladed Disk Assemblies GT Christian M. Firrone, Giuseppe Battiato, Politecnico di Torino, Torino, Italy, Bogdan Epureanu, University of Michigan, Ann Arbor, MI, United States FINAL PROGRAM 95

96 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS sco2 Systems and Component Testing Transonic Rotors Low pressure turbine aerodynamics I Paper Session Room 317B WB-36-1 Paper Session Room 318C WB-37-7 Paper Session Room 327 WB-38-6 Session Chair: Eric Clementoni, Bechtel Marine Propulsion Corporation Session Co-Chair: Darryn Fleming, Sandia National Labs Session Chair: Volker Gümmer, Rolls-Royce Deutschland Ltd. & Co. KG Session Co-Chair: Heinz-Peter Schiffer, Technische Universität Darmstadt Session Chair: Yavuz Guendogdu, MTU Session Co-Chair: Akif Mumcu, Leibniz Universität Hannover 10:45 Evaluation of Recent Data From the Sandia National Laboratories Closed Brayton Cycle Testing GT Jim Pasch, Sandia National Lab, Albuquerque, NM, United States, Matt Carlson, Gary Rochau, Darryn Fleming, Sandia National Labs, Albuquerque, NM, United States Numerical Investigation of Entropy Generation Distributions in a Transonic Compressor GT Xi Nan, Institute of Engineering Thermophysics,, Beijing, China, Le Liu, Institute of Engineering Thermophysics, Beijing, China, Ning Ma, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, Beijing, China, Qian Lu, Feng Lin, Institute of Engineering Thermophysics, Beijing, China Analysis of a LPT Rotor Blade for a Geared Engine: Part II Characterization of the Time-Varying Flow Field in a Single Stage Research Turbine GT Francesca Satta, Daniele Infantino, Daniele Simoni, University of Genova, Genova, Italy, Marina Ubaldi, Pietro Zunino, Università di Genova, Genova, Italy, Francesco Bertini, GE AvioAero, Rivalta di Torino, Italy 11:15 Steady-State Power Operation of a Supercritical Carbon Dioxide Brayton Cycle with Thermal-Hydraulic Control GT Eric Clementoni, Timothy Cox, Martha King, Bechtel Marine Propulsion Corporation, West Mifflin, PA, United States Vorticity Dynamics Based Flow Diagnosis for a 1.5-Stage High Pressure Compressor With an Optimized Transonic Rotor GT Huanlong Chen, Harbin Institute of Technology, Harbin, Heilongjiang, China, Mark Turner, Kiran Siddappaji, Syed Moez Hussain Mahmood, University of Cincinnati, Cincinnati, OH, United States Analysis of a LPT Rotor Blade for a Geared Engine: Part I Aero-Mechanical Design and Validation GT Matteo Giovannini, Filippo Rubechini, University of Florence, Florence, Italy, Michele Marconcini, University of Florence, Firenze, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Francesco Bertini, GE AvioAero, Rivalta di Torino, Italy 11:45 Development of the Supercritical Carbon Dioxide Power Cycle Experimental Loop in KIER GT Junhyun Cho, Hyungki Shin, Ho-Sang Ra, Gilbong Lee, Chulwoo Roh, Beomjoon Lee, Young-Jin Baik, Korea Institute of Energy Research, Daejeon, Korea (Republic) Aerodynamic Design of a Highly Loaded Axial Flow Fan Rotor Using a Novel One-Dimensional Design Method With Its Numerical Simulation GT Ali Shahsavari, isfahan university of technology, Isfahan, Isfahan, Iran, Mahdi Nili-Ahamadabadi, Isfahan University of Technology, Esfahan, Iran The Effect of Fsti to the Combined Separation Control Strategy of Surface Roughness With Upstream Wakes GT Sun Shuang, Civil Aviation University of China, Tianjin, China, Lei Zhijun, Lu Xin'gen, Zhang Yanfeng, Zhu Junqiang, Institute of Engineering Thermophyiscs, Chinese Academy of Sciences, Beijing, China 12:15 Effect of Gaseous Admixtures on Cycles With Supercritical Carbon Dioxide GT Ladislav Vesely, Vaclav Dostal, Jan Stepanek, Czech Technical University In Prague, Prague, Prague, Czech Republic Optimizing Surge Margin and Efficiency of a Transonic Compressor GT Georgios Goinis, Eberhard Nicke, DLR, Cologne, Germany Parasitic Loss due to Leading Edge Instrumentation on a Low Pressure Turbine Blade GT Henry Ng, The University of Cambridge, Cambridge, United Kingdom, John D. Coull, University of Cambridge, Cambridge, Cambs., United Kingdom 96 ASME 2016 TURBO EXPO

97 WEDNESDAY, JUNE 15 10:45AM - 12:45 PM TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY Radial Turbomachinery Design Radial Compressors - Performance Optimization (I) Unsteady Flows in Compressors II Paper Session Room E1 WB-39-5 Paper Session Room E4 WB-42-3 Paper Session Room 403 WB-44-5 Session Chair: Sami Girgis, Pratt & Whitney Session Co-Chair: Jaeho Choi, Hanwha Techwin Co., Ltd. Ali Mahallati, Concepts NREC Session Chair: Hamid Hazby, PCA Engineers Ltd., Lincoln Session Co-Chair: Liping Xu, University of Cambridge Session Chair: Henry Knobbe-Eschen, Anecom Session Co-Chair: Dale Vanzante, NASA Glenn Research Center 10:45 Numerical Analysis of the Influences of Balance Hole Diameter on the Flow Characteristics of the Back Chamber of Centrifugal Pump GT Wei Dong, WuLi Chu, Xiangjun Li, Northwestern Polytechnical University, Xi an, SHAANXI, China, Yanhui Wu, Northwestern Polytechnical University, Xian, China Experimental and Numerical Verification of an Optimization of a Fast Rotating High Performance Radial Compressor Impeller GT Martin Elfert, German Aerospace Center, Cologne, Germany, Anton Weber, German Aerospace Center (DLR), Cologne, Germany, David Wittrock, Andreas Peters, DLR, German Aerospace Center, Cologne, Germany, Christian Voss, Deutsches Zentrum für Luft- und Raumfahrt e.v. (DLR), Köln, Germany, Eberhard Nicke, DLR, Cologne, Germany Numerical Investigation of Three-Dimensional Separation in an Axial Flow Compressor: The Influence of Free-Stream Turbulence Intensity and Endwall Boundary Layer State GT Ashley Scillitoe, Paul G. Tucker, University of Cambridge, Cambridge, United Kingdom, Paolo Adami, Rolls-Royce Plc, Derby, United Kingdom 11:15 Technique for Adequate CFD-Modeling of the Pump with Hydro-Drive of the Low-Pressure Stage GT Vasilii Zubanov, Leonid Shabliy, Samara State Aerospace University, Samara, Russia, Alexander Krivcov, SSAU, Samara, Russia, Valery Matveev, Samara State Aerospace University, Samara, Russia Numerical Investigation of Shock Effects on Performance and Flow Field in a Transonic Centrifugal Impeller GT Huijing Zhao, Zhiheng Wang, Chaoyang Jiang, Hongshi Yu, Xi an Jiaotong University, Xi an, Shaanxi, China, Guang Xi, Xi an Jiaotong University, Xi an, Shaanxi Province, China Understanding of Secondary Loss Structures in a Multi-Stage Transonic Compressor Using DES GT Donghyun Kim, Changmin Son, Pusan National University, Busan, Korea (Republic), Kuisoon Kim, Pusan National Univ, Pusan, Korea (Republic) 11:45 Design Method for Globally Curvature-Smooth Centrifugal Compressor Blades GT Qingzhen Bi, Shanghai Jiao Tong University, Shanghai, China, Hua Chen, National Laboratory of Turbocharging Technology North China Eng Rsrch Inst, Tianjin, China, Yaoan Lu, Shanghai Jiao Tong University, Shanghai, China, Ding Tong, National Laboratory of Engine Turbocharging Technology, Tianjin, China Flow Analysis of a High Flowrate Centrifugal Compressor Stage and Comparison With Test Rig Data GT Anton Weber, German Aerospace Center (DLR), Cologne, Germany, Christian Morsbach, Edmund Kuegeler, DLR, German Aerospace Center, Cologne, Germany, Christoph Rube, RWTH Aachen University, Aachen, Germany, Matthias Wedeking, IST TWTH Aachen, Aachen, Germany Origins and Structure of Rotating Instability: Part 1 Experimental and Numerical Observations in a Subsonic Axial Compressor Rotor GT Yanhui Wu, Northwestern Polytechnical University, Xian, China, Zhiyang Chen, Northwestern Polytechnical University, Xi'an, China, Guangyao An, Northwestern Polytechnical University, Xian, Shanxi, China, Jun Liu, Guowei Yang, Northwestern Polytechnical University, Xi an, Shanxi, China 12:15 THE OPTIMIZATION OF A CENTRIFUGAL IMPELLER BASED ON A NEW MUTI-OBJEC- TIVE EVOLUTIONARY STRATEGY GT Xiaojian LI, Yijia ZHAO, Zhengxian LIU, Hua CHEN, Quasi-3D Inverse Design of a Vaned 90-Degree Bent Diffuser for the Exit of a Centrifugal Compressor Impeller GT Mohammad Shumal, Mahdi Nili-Ahamadabadi, Ebrahim Shirani, Reynolds Correction in Centrifugal Compressors: Theory and Experimental Validation of a Revised Correlation GT Luca Scarbolo, Elisabetta Belardini, Ernani Fulvio Bellobuono, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy, Libero Tapinassi, GE Oil & Gas, Florence, FI, Italy Origins and Structure of Rotating Instability: Part 2 Numerical Observations in a Transonic Axial Compressor Rotor GT Yanhui Wu, Guangyao An, Northwestern Polytechnical University, Xian, China, Zhiyang Chen, Northwestern Polytechnical University, Xi'an, China, Jun Liu, Guowei Yang, Northwestern Polytechnical University, Xi an, Shanxi, China FINAL PROGRAM 97

98 WEDNESDAY, JUNE 15 2:30-5:30 PM AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS Propellers and Open Rotors Pollutant Emissions: Soot and Particulates Combustion Dynamics: Instability Analysis I Paper Session Room 327 WC-1-8 Paper Session Room E3 WC-4-16 Paper Session Room 317C WC-4-19 Session Chair: Rainer Schnell, German Aerospace Center (DLR) Session Co-Chair: Victor Mileshin, Central Institute of Aviation Motors Session Chair: Federico Bonzani, Ansaldo Sviluppo Energia Session Co-Chair: Fulvio Magni, GE Power Session Chair: Fabrice Giuliani, Combustion Bay One e.u., Graz Session Co-Chair: Hans Reiss, Meggitt Sensing Systems 2:30 3:00 Wake and Loss Analysis for a Double Bladed Swept Propeller GT Alexandre Capitao Patrao, Chalmers University of Technology, Göteborg, Västra Götaland, Sweden, Richard Avellán, GKN Aerospace Sweden, Trollhattan Vastra Gotaland, Sweden, Anders Lundbladh, GKN Aerospace, Trollhättan, Sweden, Tomas Grönstedt, Chalmers University, Gothenburg, Sweden Effect of Aft Rotor on the Inter-Rotor Flow of an Open Rotor Propulsion System GT Paul E. Slaboch, Saint Martin's University, Lacey, WA, United States, David B. Stephens, Dale Vanzante, NASA Glenn Research Center, Cleveland, OH, United States patio-temporal Distribution of Soot Temperature for Flames Using Optical Pyrometry Under Unsteady Inlet Airflow Conditions GT Arda Cakmakci, Michael Knadler, Jong Guen Lee, University of Cincinnati, Cincinnati, OH, United States Evaluating Effects of Fuel Properties on Smoke Emissions GT Meor Ruslan, Ihab Ahmed, Bhupendra Khandelwal, The University of Sheffield, Sheffield, South Yorkshire, United Kingdom Impact of Heat Release Distribution on the Spinning Modes of an Annular Combustor With Multiple Matrix Burners GT Davide Laera, Kevin Prieur, Daniel Durox, Thierry Schuller, Sergio Mario Camporeale, Sébastien Candel Reacting Pressurized Spray Combustor Dynamics: Part 2 High Speed PlanarMeasurements GT Ianko Chterev, Nicholas Rock, Hanna Ek, Benjamin Emerson, David Noble, Eric Mayhew, Tonghun Lee, Naibo Jiang, Sukesh Roy, Jerry Seitzman, Tim Lieuwen 3:30 4:00 4:30 5:00 Contra Rotating Propeller Modelling for Open Rotor Engine Performance Simulations GT Alexios Alexiou, Charalambos Frantzis, Nikolaos Aretakis, Vassilios Riziotis, Ioannis Roumeliotis, Konstantinos Mathioudakis, An Optimization of Swirl Recovery Vane for Fokker 29 Propeller Using Design of Experiment Method GT Wang Yangang, Chen Nanshu, Northwestern Polytechnical University, Xi an, China, Li Qingxi, Georg Eitelberg, Delft University of Technology, Delft, Netherlands Comparative Study of Two and Three Blade Mini Propellers Aerodynamic Performance GT Prathapanayaka rajeevalochanam, Vinod Kumar Nanjundaiah, Santhosh Kumar Sahadevan, Krishnamurthy Settisara Janney, Narendra Sharma, CSIR- National Aerospace Laboratories, Bangalore, Karnataka, India Integrated Simulation Model of Rotor/ Propeller Powered Aerobot in Steady Flight GT Wei Zhao, Zhenguo Wang, National University of Defense Technology, Changsha, Hunan, China Large Eddy Simulation of Soot Formation in a Model Gas Turbine Combustor GT Heeseok Koo, Malik Hassanaly, Venkat Raman, The University of Michigan, Ann Arbor, MI, United States, Michael Mueller, Princeton University, Princeton, NJ, United States, Klaus Peter Geigle, Institute of Combustion Technology, Stuttgart, Germany Large Eddy Simulation of a Reacting Jet in Cross Flow With NOx Prediction GT Johannes Weinzierl, Technical University Munich, Garching bei München, Germany, Denise Ahrens, Michael Kolb, Chair of Thermodynamics, TUM, Garching, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany Modelling of Gas turbine NOx emissions based on long-term operation data GT Christian Rudolf, RWTH Aachen University, Aachen, Germany, Manfred Wirsum, Rwth- Aachen University, Aachen, Germany, Stefano Bernero, Martin Gassner, Benjamin Timo Zoller, GE Power, Baden, Switzerland Reacting Pressurized Spray Combustor Dynamics: Part 1 Fuel Sensitivitiesand Blowoff Characterization GT Nicholas Rock, Ianko Chterev, Travis Smith, Hanna Ek, Benjamin Emerson, David Noble, Jerry Seitzman, Tim Lieuwen Influence of Heat Transfer and Material Temperature on Combustion Instabilities in a Swirl Burner GT Christian Kraus, Laurent Selle, Thierry Poinsot, Christoph M. Arndt, Henning Bockhorn Online Monitoring of Thermoacoustic Eigenmodes in Annular Combustion Systems Based on a State Space Model GT Driek Rouwenhorst, Jakob Hermann, IfTA Ingenieurbuero fuer Thermoakustik GmbH, Groebenzell, Bavaria, Germany, Wolfgang Polifke, Technische Universität München, Garching, Germany Experimental Study on Instability Characteristics of Low-Swirl Flames in a Multi-Nozzle Combustor With Different Swirling Arrays GT Weijie Liu, Bing Ge, Yinshen Tian, Shusheng Zang, Shilie Weng, Mingjia Li, Wenyan Xu 98 ASME 2016 TURBO EXPO

99 WEDNESDAY, JUNE 15 2:30-5:30 PM CONTROLS, DIAGNOSTICS & INSTRUMENTATION ELECTRIC POWER FANS & BLOWERS Topics in Instrumentation The Pathway Forward: Future Gas Turbine Products & Technologies - OEM Perspective Numerical methods and Studies - I Paper Session Room 308B WC-5-7 Panel Session Room 401 WC-8-1 Paper Session Room 308C WC-9-3 Session Organizer: Peter Loftus, Rolls-royce Plc, Derby Session Co-Organizer: Mehmet Mersinligil, Session Co-Chair: Vivek Badami, Session Chair: Richard Dennis, US Dept Of Energy Session Chair: Chunill Hah, NASA/Glenn Session Co-Chair: Zhipping Wang, Morrison 2:30 Flow Field Characterization at the Outlet of a Lean Burn Single Sector Combustor by Laser-Optical Methods GT Michael M. Schroll, Ulrich Doll, Guido Stockhausen, Christian Willert, Ulrich Dr. Meier, Christoph Hassa, Imon Bagchi Modelling of Axial Fan and Anti-Stall Ring on a Virtual Test Rig for Air Performance Evaluation GT Giovanni Delibra, Tommaso Bonanni, Alessandro Corsini, Anthony G. Sheard, David Volponi 3:00 3:30 4:00 4:30 5:00 Temperature Measurements at the Outlet of a Lean Burn Single Sector Combustor by Laser-Optical Methods GT Ulrich Doll, Johannes Heinze, Guido Stockhausen, Ulrich Dr. Meier, Christoph Hassa, Imon Bagchi Design of the Purdue Experimental Turbine Aerothermal Laboratory for Optical and Surface Aero-Thermal Measurements GT Guillermo Paniagua, DAVID GONZALEZ CUADRADO, Jorge Saavedra, Valeria Andreoli, Dave Lawrence, Terrence Meyer, Scott Meyer The Use of Eddy Current Sensors for the Measurement of Rotor Blade Tip Timing: Development of a New Method Based on Integration GT Kamaljit Chana, University of Oxford, Oxford, OTHER, United Kingdom, Deepanshu Singh, IIT Delhi, NEW DELHI, India, Vikram Sridhar, Oxford University, Oxford, United Kingdom Design Considerations for Tip Clearance Control and Measurement on a Turbine Rainbow Rotor With Multiple Blade Tip Geometries GT Sergio Lavagnoli, Von Karman Inst for Fluid Dynamics, Rhode Saint Genése, Belgium, Cis De Maesschalck, Von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium, Valeria Andreoli, Purdue University, West Lafayette, IN, United States P A N E L Numerical Simulations of Unsteady Aerodynamic Effects in the Blade Tip Region of Cooling Fans GT Gi-Don Na, Nils Springer, Michael Mauß, Frank Kameier Characterization of Tip Leakage Flow Through the Tip Clearance Gap of an Axial Industrial Fan GT Abdelaziz A. A. Gamil, Joao Teixeira, Hamad M Alhajeri, Faris Elasha Low Survey of a Forward Curved Blades Centrifugal Fan for HVAC Applications GT Lucio Cardillo, Sapienza University of Rome, Rome, Italy, Giovanni Delibra, Sapienza University of Rome, Rome, Italy, Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Dario Brivio, Fabio Breviario, Nicotra Gebhardt, Zingonia (BG), Italy Investigation of a Diffuser-Volute Combination With Variable Cross-Sectional Area for Centrifugal Fans GT Tore Fischer, Institute of Turbomachinery and Fluid Dynamics, Leibniz Universität Hannover, Hannover, Germany, Manuel Rudersdorf, Sebastian Burgmann, The fuel cell research center ZBT GmbH, Duisburg, Germany, Thorsten kleine Sextro, Institute for Turbomachniery and Fluid-Dynamics, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany FINAL PROGRAM 99

100 WEDNESDAY, JUNE 15 2:30-5:30 PM HEAT TRANSFER: GENERAL HEAT TRANSFER HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) HEAT TRANSFER: COMBUSTORS (WITH COMBUSTION, FUELS & EMISSIONS) Experimental Heat Transfer Methods Pre-Swirl Systems Combustor Liner Cooling - Experimental and Validation Session Type Room 301 WC-13-3 Session Type Room 307A WC-15-3 Session Type Room 307B WC-17-1 Session Organizer: Jeffrey Bons, Ohio State Univ. Session Co-Organizer: Pepe Palafox, GE Aviation Session Organizer: Peter Childs, Imperial College London Session Co-Organizer: Riccardo Da Soghe, Ergon Research Session Chair: Marc Polanka, Air Force Institute of Technology Session Co-Chair: Rudolph Dudebout, Honeywell Aerospace 2:30 3:00 3:30 CFD Evaluations of Film Cooling Flow Scaling Between Engine and Experimental Conditions GT James Rutledge, Air Force Institute of Technology, Wright Patterson AFB, OH, United States, Marc Polanka, Nathan Greiner, Air Force Institute of Technology, WPAFB, OH, United States Laboratory Infra-Red Thermal Assessment of Laser-Sintered High-Pressure Nozzle Guide Vanes to De-Risk Engine Design Programmes GT Benjamin Kirollos, University of Oxford, Oxford, United Kingdom, Thomas Povey, Univ Of Oxford, Oxford, United Kingdom Unsteady Heat Transfer and Pressure Measurements on the Airfoils of a Rotating Transonic Turbine With Multiple Cooling Configurations GT Jeremy Nickol, Randall Mathison, Michael Dunn, Jong-shang Liu, Malak Malak Experimental and Numerical Investigation of Low-Pressure Preswirl Stator-Rotor Cooling System GT Barkin Kutlu, university of central florida, OR- LANDO, FL, United States, Brandon Ealy, Center for Advanced Turbomachinery and Energy Research, University of Central Florida, Longwood, FL, United States, Jahed Hossain, Wenping Wang, University of Central Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Ching- Pang Lee, Siemens Energy Inc., Orlando, FL, United States, John Marra, Siemens Energy Inc, Orlando, FL, United States, Jae Um, Siemens Energy, Winter Garden, FL, United States, Chander Prakash, Siemens AG, Orlando, FL, United States Design and Numerical Analysis of a New Type of Pre-swirl Nozzle GT Yuxin Liu, Northwestern Polytechnical University, Xi an, China, Gaowen Liu, Northwestern Ploytechnical University, Xi an, Shaanxi, China, Xiaozhi Kong, Northwestern Polytechnical University, Xi'an, China, Qing Feng, Northwestern Ploytechnical University, Xi an, Shaanxi, China Experimental and Numerical Investigations of Effusion Cooling for High Pressure Turbine Components: Part 1 Experimental Study With PSP GT Guanghua Wang, Gustavo Ledezma, GE Global Research, Niskayuna, NY, United States, James DeLancey, GE Global Research Center, Niskayuna, NY, United States, Anquan Wang, GE Aviation, Cincinnati, OH, United States Experimental and Numerical Investigation of Effusion Cooling for High Pressure Turbine Components: Part 2 Numerical Results GT Gustavo Ledezma, Julienne LaChance, GE Global Research, Niskayuna, NY, United States, Anquan Wang, GE Aviation, Cincinnati, OH, United States, Guanghua Wang, GE Global Research, Niskayuna, NY, United States, Gregory Laskowski, GE Aviation, Lynn, MA, United States Effusion Cooled Combustor Liner Tiles With Modern Cooling Concepts: A Comparative Experimental Study GT Thomas Jackowski, Achmed Schulz, Hans-Jorg Bauer, Miklos Gerendas, Thomas Behrendt 4:00 Uncertainty Quantification of Thermocouple Air Temperature Measurement in Highly Radiative Environment: Application to Turbofan Engine Compartment GT Yannick Sommerer, Vincent Drouin, AIRBUS, TOULOUSE, France, Xavier Nicolas, Benoît Trouette, Université Paris-Est, MSME UMR CNRS 8208, Marne-La-Vallée, France Full Coverage Film Cooling Performance for Combustor Cooling Manufactured Using DMLS GT Kyle Vinton, Sara Nahang-Toudeshki, Lesley Wright, Baylor University, Waco, TX, United States, Andrew Carter, Stratasys Direct Manufacturing, Austin, TX, United States 4:30 5:00 Water-Mist-Cooled Heat Sink for Autonomous Air-Cooling System (AACS) of More Electric Aircraft (MEA) GT Akira Murata, Tokyo University of Agriculture and Technology, Tokyo, Japan, Hiroshi Saito, Tokyo Metropolitan College of Industrial Technology, Tokyo, Japan, Yoji Okita, IHI Corporation, Kanagawa, Japan An Experimental and Numerical Investigation of the Effect of Combustor-Nozzle Platform Misalignment on Endwall Heat Transfer at Transonic High Turbulence Conditions GT Allan Arisi, David E. Mayo, Jr., ZHIGANG LI, Wing-Fai Ng, Hee-Koo Moon, Luzeng Zhang Theoretical and Numerical Analysis on the Temperature Drop and Power Consumption of a Pre-Swirl System GT Gaowen Liu, Northwestern Ploytechnical University, Xi an, Shaanxi, China, Heng Wu, Northwestern Polytechnical University, Xi'an, Shaanxi, China, Qing Feng, Northwestern Ploytechnical University, Xi an, Shaanxi, China, Songling Liu, Northwestern Polytechnical University, Xi an, Shaanxi, China Effusion Cooling System Optimization for Modern Lean Burn Combustor GT Antonio Andreini, University of Florence, Florence, Italy, Riccardo Becchi, University of Florence, Firenze, Italy, Bruno Facchini, Alessio Picchi, Lorenzo Mazzei, University of Florence, Florence, Italy, Antonio Peschiulli, GE Avio Srl, Rivalta di Torino, Italy Experimental Investigation of Effusion Cooling Performance on the Liner of a Scaled Three Injector Annular Combustor GT Yongbin Ji, Bing Ge, Shusheng Zang, Jiangpeng Yu, Ji Zhang 100 ASME 2016 TURBO EXPO

101 WEDNESDAY, JUNE 15 2:30-5:30 PM HEAT TRANSFER: EXPERIMENTAL FILM COOLING MANUFACTURING MATERIALS & METALLURGY MARINE Hole Geometry Effects-1 Additive Manufacturing and Certification of Additive Manufacturing Parts Design and Development Paper Session Room 308A WC-19-1 Panel Session Room 402 WC Paper Session Room 318A WC-22-1 Session Organizer: Yong Kim, Solar Turbines Inc Session Co-Organizer: Jae Um, Siemens Energy Session Chair: Michael Gorelik, FAA Session Co-Chair: Laurent Cretegny, General Electric Session Chair: Morgan Hendry, SSS Clutch Company, Inc. Session Co-Chair: Sangpil Lim, Rolls Royce Marine Korea 2:30 Application of S-PIV for Investigation of Round and Shaped Film Cooling Holes at High Density Ratios GT Travis Watson, Sara Nahang-Toudeshki, Lesley Wright, Dan Crites, Mark Morris, Ardeshir Riahi Academic Perspective on Additive Manufacturing GT Dong-Yol Yang, KAIST, Seoul, Korea (Republic) Investigation of Performance of High Velocity Air Intake Wave-plate Separators for Marine Gas Turbines GT Yigang Luan, Yang Ni, Huannan Liu, Shi Bu, Haiou Sun, Harbin Engineering University, Harbin, China 3:00 3:30 The Effect of a Meter-Diffuser Offset on Shaped Film Cooling Hole Adiabatic Effectiveness GT Shane Haydt, Pennsylvania State University, University Park, PA, United States, Stephen Lynch, Penn State University, University Park, PA, United States, Scott Lewis, Pratt & Whitney, East Hartford, CT, United States Effects of Freestream Mach Number, Reynolds Number, and Boundary Layer Thickness on Film Cooling Effectiveness of Shaped Holes GT Josh Anderson, Ellen Wilkes, John McClintic, David Bogard A path toward the industrial adoption of metal additive manufacturing technology GT Yong Yang, General Electric, Shanghai, China Experimental Investigation of Variable Geometry Turbine Annular Cascade for Marine Gas Turbines GT Xiying Niu, Chen Liang, Xuemei Jing, Jia Wei, Kaidi Zhu, Harbin Marine Boiler and Turbine Research Institute, Harbin/Heilongjiang, China Research on Characteristics of a new type of Marine Gas Turbine Exhaust Ejector Device GT Tao Sun, LANXIN SUN, Yigang Luan, PENG Sun, Harbin Engineering University, Harbin, Heilongjiang, China 4:00 4:30 An Investigation of Turbine Film Cooling Effectiveness With Shaped Holes and Internal Cross-Flow With Varying Operational Parameters GT Ellen Wilkes, The University of Texas, Austin, TX, United States, Josh Anderson, John McClintic, The University of Texas at Austin, Austin, TX, United States, David Bogard, Univ Of Texas At Austin, Austin, TX, United States Experimental Investigation on the Influence of Inclination Angle on the Film Cooling Performance of Diffuser Shaped Holes GT Cunliang Liu, Yingni Zhai, Hui-ren Zhu, A-sai Wu Siemens perspective on Additive Manufacturing GT Ingomar Kelbassa, Siemens AG, Berlin, Berlin, Germany Rapid Qualification for Additive Manufacturing Processes GT Michael Enright, Southwest Research Inst, San Antonio, TX, United States orking Process Control in a Ship Gas Turbine Engine of Complex Cycle GT Valerii Matviienko, Nakhimov Naval School, Sevastopol, Russia, Volodimir Ocheretianyi, Sevastopol State University, Sevastopol, Russia, Oleksandr Andriets, National Aviation University, Kyiv, Ukraine, Sergiy Riznyk, SE Ivchenko Progress, Zaporozhye 69068, Ukraine The Influence of Upstream Turbulence Intensity on the Near- and Far-Wake Structure of Tidal Stream Turbines GT Mohammad Ahmadi, University of Dundee, Dundee, United Kingdom 5:00 Combined Influence of Surface Deposition and Hole-Blockage on Film-Cooling Performances GT Xue-yi Wang, Jian Pu, Rui-ming Yuan, Jianhua Wang Thermal Stability of Nickel-Base Alloys GT David Shifler, Office of Naval Research, Arlington, VA, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States, Rabindra Mahapatra, David Faucett, Nesredin Kedir, Luis Sanchez, NAVAIR, Patuxent River, MD, United States FINAL PROGRAM 101

102 WEDNESDAY, JUNE 15 2:30-5:30 PM OIL & GAS APPLICATIONS OIL & GAS APPLICATIONS ORGANIC RANKINE CYCLE POWER SYSTEMS Turbomachinery Instrumentation Components, Practices, and Uncertainty Oil & Gas Applications ORC Power System Components Tutorial Session Room 317A WC-24-9 Tutorial Session Room E5 WC Paper Session Room 317B WC-25-2 Session Chair: Tim Allison, Southwest Research Institute, Session Co-Chair: Jason Wilkes, Southwest Research Institute, Michele Pinelli, University of Ferrara Session Chair: Rainer Kurz, Solar Turbines Incorporated Session Co-Chair: Klaus Brun, Southwest Research Institute Session Chair: Teemu Turunen-Saaresti, Lappeenranta University of Technology Session Co-Chair: Arthur Leroux, ENOGIA SAS 2:30 Thermodynamic analysis of Organic Rankine Cycle (ORC) systems based on turbine performance prediction GT Jian Song, Chunwei Gu, Tsinghua University, Beijing, Beijing, China 3:00 T U T U Development and Design of a Two-Stage Contraction Zone and Test Section of an Organic Rankine Cycle Wind Tunnel GT Maximilian Passmann, Karsten Hasselmann, Felix Reinker, Stefan aus der Wiesche, Franz Joos 3:30 T O T O Experimental Investigation of a Non-Ideal Expansion Flow of Siloxane Vapor MDM GT Andrea Spinelli, Fabio Cozzi, Marta Zocca, Paolo Gaetani, Vincenzo Dossena, Alberto Guardone, Politecnico Di Milano, milano, italy, Italy 4:00 R I R I Development of Efficient Small Scale Axial Turbine for Solar Driven Organic Rankine Cycle GT Ayad Al Jubori, Raya AL-Dadah, Saad Mahmoud, University of Birmingham, Birmingham, West Midlands, United Kingdom, KHALIL KHALIL, University of Birmingham,,BIRMING- HAM, West Midlands, United Kingdom, Ali Bahr Ennil, University of Birmingham, Birmingham, West Midlands, United Kingdom 4:30 A L A L 5:00 Preliminary Design of the Orchid: A Facility for Studying Non-Ideal Compressible Fluid Dynamics and Testing ORC Expanders GT Adam Head, Delft University of Technology, Delft, Netherlands, Carlo De Servi, TU Delft, Delft, Netherlands, Emiliano Casati, Matteo Pini, Piero Colonna, Delft University of Technology, Delft, Zuid-Holland, Netherlands 102 ASME 2016 TURBO EXPO

103 WEDNESDAY, JUNE 15 2:30-5:30 PM STEAM TURBINES STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING Advances in Design Methods and Manufacturing Technology for Steam Turbines Bearings - Gas Bearings 2 Rotor-Stator Interaction Panel Session Room 403 WC Paper Session Room 300 WC-31-2 Paper Session Room 307C WC-32-9 Session Chair: Damian Vogt, University of Stuttgart Session Co-Chair: Tao Guo, GE Session Chair: Mihai Arghir, Universite De Poitiers - Instit Pprime Session Co-Chair: Keun Ryu, Hanyang University, Ansan Session Chair: Stefano Zucca, Politecnico Di Torino - DIMEAS Session Co-Chair: Stefan Schmitt, Siemens 2:30 Advances in Design Methods and Manufacturing Technology for Steam Turbines GT Eiichiro Watanabe, MHPS, Yokohama, Japan Rotordynamic Performance Measurements and Predictions of a Rotor Supportedon Multilayer Gas Foil Journal Bearings for Microturbomachinery GT Jongsung Lee, Young Min Kim, Moon Sung Park, Tae Ho Kim, Kyoung ku Ha, Changha Lee, Sae Hoon Kim Support Vibration Diagnostics and Limits in Gas Turbines GT Marcin Bielecki, General Electric, Warszawa, Poland, Salvatore Costagliola, General Electric, Florence, Italy, Piotr Gebalski, General Electric, Warsaw, Poland 3:00 3:30 Advances in Design Methods and Manufacturing Technology for Steam Turbines GT Thomas Thiemann, Siemens AG, Mulheim An Der Ruhr, Germany Design Steam Turbine for large fossil power plant GT Seong Jong Yang, Doosan Heavy Industries & Co., Changwon, Korea (Republic) Duffing's Vibration of a Rotor Supported on Gas Foil Bearings With Base Excitation: Measurements and Model Predictions GT Tae Ho Kim, Young Min Kim, Jongsung Lee, Moon Sung Park, Kookmin University, Seoul, Korea (Republic), Kyoung ku Ha, Hyundai Motor Group, Yongin-si, Korea (Republic), Changha Lee, Chimyung Kim, Hyundai Motors, Yongin-Si, Korea (Republic) Identification of Dynamic Characteristics of Gas Foil Thrust Bearings Using Base Excitation GT Tae Ho Kim, Moon Sung Park, Jongsung Lee, Young Min Kim, Kookmin University, Seoul, Korea (Republic), Kyoung ku Ha, Hyundai Motor Group, Yongin-si, Korea (Republic), Jeonghee Park, Changha Lee, Chimyung Kim, Hyundai Motors, Yongin-Si, Korea (Republic) Full 3D Rotor/Stator Interaction Simulations in Aircraft Engines With Time Dependent Angular Speed GT Alain Batailly, École Polytechnique de Montréal, Montréal, QC, Canada, Mathias Legrand, McGill University, Montreal, QC, Canada, Christophe Pierre, University of Illinois, Urbana, IL, United States Experimental and Numerical Simulation of a Contact Induced Rotor/Stator Interaction Inside an Aircraft Engine High-Pressure Compressor GT Alain Batailly, École Polytechnique de Montréal, Montréal, QC, Canada, Quentin Agrapart, Antoine Millecamps, Snecma, Moissy-Cramayel, France 4:00 Advances in Design Methods and Manufacturing Technology for Steam Turbines GT Jiandao Yang, Shanghai Turbine Works Co., Ltd, Shanghai, China Effect of Top Foil Sagging on the Performance of Air Thrust Foil Bearings With Partial Bump Supports GT Fangcheng Xu, Daejong Kim, Behzad Zamanian Yazdi, University of Texas at Arlington, Arlington, TX, United States Minimising Clearance Consumption: A Key Factor for the Design of Blades Robust to Rotor/Stator Interactions? GT Alain Batailly, École Polytechnique de Montréal, Montréal, QC, Canada, Antoine Millecamps, Snecma, Moissy-Cramayel, France 4:30 Three-Dimensional Turbulent Thermo-Elastohydrodynamic Analyses of HybridThrust Foil Bearings using Real Gas Model GT Fangcheng Xu, Daejong Kim, University of Texas at Arlington, Arlington, TX, United States 5:00 Advances in Design Methods and Manufacturing Technology for Steam Turbines GT Ivan Mcbean, General Electric, 5454 Bellikon, Switzerland Impact of Bearing Clearance on Measured Stiffness and Damping Coefficients and Thermal Performance of a High-Stiffness Generation 3 Foil Journal Bearing GT Jason Wilkes, Jonathan Wade, Aaron Rimpel, Jeff Moore, Erik Swanson, Joseph Grieco, Jerry Brady, BP, Parametric Bird Strike Study of a Transonic Rotor Using Isogeometric Analysis GT Sam Duckitt, ALE Delft, Delft, Netherlands, Shahrokh Shahpar, Rolls-Royce plc., Derby, United Kingdom, Chiara Bisagni, Delft University of Technology, Delft, OO, Netherlands FINAL PROGRAM 103

104 WEDNESDAY, JUNE 15 2:30-5:30 PM STUDENT ADVISORY SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS Careers in Turbomachinery sco2 Turbomachinery Design Aerodynamic Losses Panel Session Third Floor Auditorium WC-35-1 Tutorial Session Room E5 WC-36-9 Paper Session Room 318C WC-38-1 Panelists: Dr. Alexander Mirzamoghadam, Honeywell, Dr. Lamyaa El-Gabry, American University in Cairo, Dr. Klaus Brun, Southwest Research Institute, Dr. Hany Moustapha, AÉROÉTS, Dr. Seung Jin Song, Seoul National University Session Chair: Jeff Moore, Southwest Research Institute Session Chair: Sergio Lavagnoli, Von Karman Inst for Fluid Dynamics Session Co-Chair: Jose Maria Rey Villazon, GE Aviation 2:30 The Investigations of the Balance Hole Area and Radial Seal Clearance's Influences on Turbine Efficiency in the Wheel Chamber GT Guoliang Deng, Qi Sun, Shan Wang, Chaoyang Tian, Qi Wu, Xiaodan Zhang, Xiaoqin Du 3:00 T U T U Experimental and Numerical Investigation of Unsteady Structures Within the Rim Seal Cavity in the Presence of Purge Mass Flow GT Cengiz Camci, Penn State University, University Park, PA, United States, Jason Town, Michael Averbach, The Pennsylvania State University, University Park, PA, United States 3:30 T O T O Influence of a Shroud Axisymmetric Slot Injection on a High Pressure Turbine Flow GT Etienne Tang, Turbomeca, Bordes, France, Isabelle Trebinjac, LMFA - Ecole Centrale de Lyon, Ecully, France, Ghislaine Ngo Boum, Ecole Centrale de Lyon-LMFA, Ecully, France, Gilles Leroy, Turbomeca, Bordes Cedex, France, Mickael Philit, Turbomeca, Bordes, France 4:00 R I R I Modulation and Radial Migration of Turbine Hub Cavity Modes by the Rim Seal Purge Flow GT Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari, Gregor Schmid, Stefan Völker 4:30 A L A L High-Pressure Turbine Rim Seal Design for Increased Efficiency GT Martin Chilla, Howard Hodson, Graham Pullan, David Newman 5:00 Experimental Investigation of Turbine Stage Flow Field and Performance at Varying Cavity Purge Rates and Operating Speeds GT Johan Dahlqvist, Royal Institute of Technology, Stockholm, Sweden, Jens Fridh, KTH Royal Institute of Technology, Stockholm, Sweden 104 ASME 2016 TURBO EXPO

105 WEDNESDAY, JUNE 15 2:30-5:30 PM TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY Throughflow and Preliminary Design Methods Radial Compressors - Map Width Enhancement Unsteady Flows in Turbines III Paper Session Room E2 WC-39-6 Paper Session Room E1 WC-42-6 Paper Session Room E4 WC-44-3 Session Chair: Akin Keskin, Rolls-Royce Session Chair: Luca Porreca, MAN Diesel&Turbo Session Co-Chair: Christian Aalburg, GE Session Chair: Lubomir Ribarov, UTC AEROSPACE SYSTEMS 2:30 A Database of Optimal Airfoils for Axial Compressor Throughflow Design GT Markus Schnoes, German Aerospace Center, Cologne, Germany, Eberhard Nicke, DLR, Cologne, Germany Effect of Exit Pressure Pulsation on the Performance and Stability Limit of a Turbocharger Centrifugal Compressor GT Maria Esperanza Barrera-Medrano, Peter Newton, Ricardo Martinez-Botas, Srithar Rajoo, Isao Tomita, Seiichi Ibaraki Detailed Numerical Characterization of the Suction Side Laminar Separation Bubble for a High-Lift Low Pressure Turbine Blade by Means of RANS and LES GT Fabio Bigoni, Stefano Vagnoli, Tom Verstraete, Tony Arts 3:00 An Aero-Thermal Coupled Throughflow Method for Convective Cooled Turbines GT Chunwei Gu, Haibo Li, Wei Ba, Xiaodong Ren, Tsinghua University, Beijing, Chinas Flow Loss Mechanism And Modeling In A Centrifugal Compressor Casing GT Mingxu QI, Beijing Institute of Technology, Beijing, Beijing, China, Liangjun Hu, Ford Motor Company, Dearborn, MI, United States, Harold Sun, Ford Motor Company, W Bloomfield, MI, United States, Margaret Wooldridge, Univ Of Michigan, Ann Arbor, MI, United States Investigation of Bypass Transition in the Presence of a Separation Bubble With Tomographic PIV GT Christoph Lyko, Technische Universität Berlin, Berlin, Germany, Dirk Michaelis, Mirko Dittmar, LaVision, Göttingen, Germany, Dieter Peitsch, Technische Universität Berlin, Berlin, Berlin, Germany 3:30 Development of an Improved Streamline Curvature Approach for Transonic Axial Compressor GT WU XIAOXIONG, Bo Liu, SHI LEI, ZHANG GUOCHEN, Mao xiaochen Multi-Point Optimization of Recirculation Flow Type Casing Treatment in Centrifugal Compressors GT Min Thaw Tun, Daisaku Sakaguchi, Nagasaki University, Nagasaki, Nagasaki, Japan, Ryusuke Numakura, Baotong Wang, IHI Corporation, Yokohama, Japan Performance Metric for Turbine Stage Under Unsteady Pulsating Flow Environment GT Jinwook Lee, C.S. Tan, Borislav Sirakov, Chris Wilkins, Hong-Sik Im, Martin Babak, Denis Tisserant 4:00 Multistage Axial Compressor Flow Field Predictions Using CFD and Through- Flow Calculations GT Milan Banjac, Milan Petrovic, University of Belgrade, Belgrade, Serbia, Alexander Wiedermann, MAN Diesel & Turbo SE, Oberhausen, Germany Numerically Derived Design Guidelines of Self Recirculation Casing Treatment for Industrial Centrifugal Compressors GT Sewoong Jung, Robert Pelton, Hanwha Techwin, Houston, TX, United States erformance Characterization of Twin Scroll Turbine Stage for Vehicular Turbocharger Under Unsteady Pulsating Flow Environment GT Jinwook Lee, C.S. Tan, Borislav Sirakov, Chris Wilkins, Hong-Sik Im, Martin Babak, Denis Tisserant 4:30 5:00 A One-Dimensional Analytical Method for Turbine Blade Preliminary Cooling Design GT Chen Li, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Jian-Jun Liu, Institute of Engineering Thermophysics, Beijing, China Performance Prediction and Early Design Code for Axial Turbines and its Application in Research and Predesign GT Alexander Krumme, German Aerospace Center DLR, Goettingen, Germany Characterizing Flow Effects of Ported Shroud Casing Treatment on Centrifugal Compressor Performance GT George Christou, C.S. Tan, Massachusetts Institute of Technology, Cambridge, MA, United States, Borislav Sirakov, Honeywell Turbo Technologies, Torrance, CA, United States, Vai Man Lei, Giuseppe Alescio, Honeywell, Torrance, CA, United States A research on Waste-gated turbine performance under unsteady flow condition GT Qiyou Deng, Richard Burke, Qingning Zhang, University of Bath, Bath, Avon, United Kingdom, Ludek Pohorelsky, Honeywell spol. s.r.o. (CZE), Brno, Czech Republic Influence of Unsteady Wakes on the Secondary Flows in the Linear T106 Turbine Cascade GT Ilker Kirik, Reinhard Niehuis, University of the German Armed Forces Munich, Neubiberg, Germany FINAL PROGRAM 105

106 WEDNESDAY, JUNE 15 2:30-5:30 PM TURBOMACHINERY: MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION & UNCERTAINTY QUANTIFICATION Uncertainty Quantification Paper Session Room 318B WC-45-6 Session Chair: Francesco Montomoli, Imperial College London Session Co-Chair: Andrea Milli, Generla Electric Aviation 2:30 Uncertainty Quantification of Heat Transfer for a Highly Loaded Gas Turbine Blade Endwall Using Polynomial Chaos GT Peiyuan Zhu, Yong Yan, LIMING SONG, Jun Li, Zhenping Feng 3:00 ANALYTICAL UNCERTAINTY ANALY- SIS FOR HOT-WIRE MEASUREMENTS GT Christian Hösgen, Stephan Behre, Herwart Hoenen, Peter Franz Jeschke 3:30 Analysis of High Pressure Turbine Nozzle Guide Vanes Considering Geometric Variations GT Lars Högner, Paul Voigt, Alkin Nasuf, Matthias Voigt, Marcus Meyer, Frederic Goenaga, Christopher Berridge, Konrad Vogeler 4:00 A Single Formulation for Uncertainty Propagation in Turbomachinery: SAM- BA PC GT Richard Ahlfeld, Francesco Montomoli, Imperial College London, London, United Kingdom 4:30 mpact of Manufacturing Variability on the Aerodynamic Performance of a Centrifugal Compressor Stage With Curvilinear Blades GT Andrea Panizza, Roberto Valente, Dante Tommaso Rubino,, Libero Tapinassi 5:00 Flow Analysis and Uncertainty Quantification of a 2D Compressor Cascade With Dirty Blades GT Ruihong Qin, Yaping Ju, Yazhou Wang, Chuhua Zhang, Xi an Jiaotong University, Xi an, Shannxi, China 106 ASME 2016 TURBO EXPO

107 THURSDAY, JUNE 16 8:00-10:00 AM AIRCRAFT ENGINE COAL, BIOMASS & ALTERNATIVE FUELS COMBUSTION, FUELS & EMISSIONS Whole Engine Performance and Novel Concepts Heavy Liquid Fuels Premixed Flames Paper Session Room 318B ThA-1-10 Paper Session Room 308B ThA-3-3 Paper Session Room 317C ThA-4-3 Session Chair: Ioannis Roumeliotis, Hellenic Naval Academy Session Co-Chair: Anders Lundbladh, GKN Aerospace Session Chair: Francesco Fantozzi, University of Perugia, Dip. Ingegneria Industriale Session Co-Chair: Marina Braun-Unkhoff, German Aerospace Center (DLR) Session Chair: K Doebbeling, Ansaldo Energia 8:00 8:30 Performance Investigation of Cycle-Integrated Parallel Hybrid Turboshafts GT Patrick Vratny, Sascha Kaiser, Arne Seitz, Bauhaus Luftfahrt e.v., Ottobrunn, Germany, Stefan Donnerhack, MTU Aero Engines AG, Munich, Germany Potential of Micro Turbine Based Propulsion Systems for Civil UAVs: A Case Study GT Anna Marcellan, Wilfried Visser, Piero Colonna, Delft University of Technology, Delft, Netherlands Comparison of Methanol and Kerosene Combustion in a Swirl Stabilized Spray Combustor GT Yeshayhaou Levy, Technion, Haifa 32000, Israel, Vladimir Erenburg, Technion:- Israel Institute of Technology, Haifa, Israel, Alex Roizman, Technion - Israel Institute of Technology, Haifa, Israel, Valery Sherbaum, Technion:- Israel Institute of Technology, Haifa, Israel, Vitaly Ovcharenko, Technion: -Israel Institute of Technology, Haifa, Israel Improving the efficiency of heavy-fuelled gas turbines: the successful experience achieved at the Yugadanavi 300 MW CCGT in Sri Lanka GT Michel Molière, Nuhuman Marikkar, Matthieu Vierling, Maher Aboujaib, Christophe Verdy, Dmitry Sokolov, Bruno Monetti, Donald Meskers, Robert Russell Effect of Quarl on N2- and CO2-Diluted Methane Oxy-Flames Stabilized by an Axial-Plus-Tangential Swirler GT Paul Jourdaine, EM2C laboratory, Châtenay-Malabry, France, CLEMENT MIRAT, ECOLE CENTRALESUPELEC - CNRS -EM2C, Chatenay Malabry, France, Jerome Beaunier, ECOLE CEN- TRALESUPELEC - CNRS -EM2C, Châtenay-Malabry, France, Jean Caudal, Youssef Joumani, Air Liquide, Les Loges-en-Josas, France, Thierry Schuller, CNRS and Ecole Centralesupelec, Chatenay-Malabry, France Flame Holding in the Premixing Zone of a Gas Turbine Model Combustor After Forced Ignition of H2-NG-Air-Mixtures GT Matthias Utschick, Technische Universität München, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany 9:00 Unified Thermodynamic Evaluation of Radical Aero Engine Cycles GT Sascha Kaiser, Arne Seitz, Patrick Vratny, Mirko Hornung, Bauhaus Luftfahrt E.V., Ottobrunn, Germany Combustion of Aldehydes in the Negative Temperature Coefficient Region: Products and Pathways GT Ghazal Barari, Batikan Koroglu, Artëm Masunov, Subith Vasu, University of Central Florida, Orlando, FL, United States A Comparison of Turbulent Flame Speed Correlations for Hydrocarbon Fuels at Elevated Pressures GT Eoin Burke, Mechanical Engineering and Combustion Chemistry Centre, Galway, Ireland, Rory Monaghan, Combustion Chemistry Centre, Galway, Ireland, Felix Guethe, General Electric Power, CH-5401 Baden, Switzerland 9:30 Thermo-Dynamic Multi-Criteria Optimization of the Unified Engine Core for the Line of Turbofan Engines GT Viktor Rybakov, Venedikt S. Kuz michev, Andrey Y. Tkachenko, Ilia N. Krupenich, Samara State Aerospace University (SSAU), Samara, Russia Influence of Residence Time on Fuel Spray Sauter Mean Diameter (SMD) and Emissions Using Biodiesel and Its Blends in a Low NOx Gas Turbine Combustor GT Mohamed A. Altaher, Hu Li, The University of Leeds, Leeds, United Kingdom, Gordon E. Andrews, Univeristy of Leeds, Leeds, United Kingdom Determination of Laminar Flame Speed and Markstein Numbers Deduced From Turbulent Flames Using the Bomb Method GT Tobias M. Baust, Karlsruhe Institute of Technology, Karlsruhe, Germany, Nikolaos Zarzalis, Karlsruhe Inst. of Tech., Division of Comb. Tech., Karlsruhe, Germany, Peter Habisreuther, Karlsruhe Institute of Technology, Engler-Bunte-Institute, Karlsruhe, Germany FINAL PROGRAM 107

108 THURSDAY, JUNE 16 8:00-10:00 AM COMBUSTION, FUELS & EMISSIONS CYCLE INNOVATIONS HEAT TRANSFER: NUMERICAL FILM COOLING Flashback & Blowout Cycles for Propulsion Numerical Film Cooling IV Paper Session Room E3 ThA-4-7 Paper Session Room 317A ThA- 6-4 Paper Session Room 301 ThA Session Chair: Leiyong Jiang, National Research Council Session Co-Chair: Rudolph Dudebout, Honeywell Aerospace, Yinghua Han, NRC Aerospace Session Chair: Alexander Heidebrecht, Cranfield University Session Organizer: Mounir Ibrahim, Cleveland State University Session Co-Chair: Hyung-hee Cho, Yonsei Univ. 8:00 Prediction of Confined Flame Flashback Limits Using Boundary Layer Separation Theory GT Vera Hoferichter, TU München, LS für Thermodynamik, Garching, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany Ultra Low Emission Technology Innovations for Mid-Century Aircraft Turbine Engines GT Tomas Grönstedt, Carlos Xisto, Oliver Schmitz, Stefan Donnerhack, Anders Lundbladh, Kyros Yakinthos, Arne Seitz, Vishal Sethi, Andrew Rolt, Paul Newton, Nicolas Tantot, Nicolas García Rosa Large Eddy Simulation of Inclined Jet in Cross Flow With Cylindrical and Fan- Shaped Holes GT Lingxu Zhong, Chao Zhou, Shiyi Chen, Peking University, Beijing, China 8:30 Influence of Boundary Layer Air Injection on Flashback of Premixed Hydrogen-Air Flames GT Vera Hoferichter, TU München, LS für Thermodynamik, Garching, Germany, Payam Mohammadzadeh Keleshtery, LS für Thermodynamik/ TU München, Garching, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany, Yoshikazu Matsumura, Mitsubishi Hitachi Power Systems, Kobe, Hyogo, Japan Evaluation of the Cycle Averaged Performances of a Pulsed Detonation Engine Based on Thermodynamic Cycle Computations GT Cleopatra Cuciumita, COMOTI Romanian R&D Institute for Gas Turbines, Bucharest, Romania, Ionut Porumbel, INCDT COMOTI, Bucharest, Romania, Tudor Cuciuc, Institut of Applied Physics, Chisinau, Moldova - Republic Of Comparison of RANS and DES Modeling Against Measurements of Leading Edge Film Cooling on a First-Stage Vane GT Silvia Ravelli, University of Bergamo, Dalmine, Italy, Giovanna Barigozzi, Universita Di Bergamo, Dalmine, Italy 9:00 Predicting Flashback Limits of a Gas Turbine Model Combustor Based on Velocity and Fuel Concentration for H2- Air-Mixtures GT Matthias Utschick, Daniel Eiringhaus, Christian Köhler, Technische Universität München, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany An Outlook for Radical Aero Engine Intercooler Concepts GT Olivier Petit, Chalmers University of Technology, Gothenbourg, Sweden, Carlos Xisto, Chalmers University of Technology, Göteborg, Sweden, xin zhao, chalmers university of technology, Gothenbourg, Sweden, Tomas Grönstedt, Chalmers University, Gothenburg, Sweden Investigation of Steady and Unsteady Film-Cooling Using Immersed Mesh Blocks With New Conservative Interface Scheme GT Y Jiang, Li He, University of Oxford, Oxford, United Kingdom, Luigi Capone, Rolls-Royce, plc., Derby, United Kingdom, Ed Romero, Rolls Royce plc, Bristol, United Kingdom 9:30 Application of a Turbulent Jet Flame Flashback Propensity Model to a Commercial Gas Turbine Combustor GT Alireza Kalantari, Elliot Sullivan-Lewis, Vince McDonell, UCI Combustion Laboratory, Irvine, CA, United States 108 ASME 2016 TURBO EXPO

109 THURSDAY, JUNE 16 8:00-10:00 AM HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) HEAT TRANSFER: EXPERIMENTAL INTERNAL COOLING INDUSTRIAL & COGENERATION Brush and Miscellaneous Seals Experimental Internal Cooling: Impingement Cooling II Combustion & Emissions Paper Session Room 307B ThA Paper Session Room 307A ThA Tutorial Session Room 401 ThA-20-7 Session Organizer: Stacie Tibos, GE Power Session Co-Chair: James Scobie, University of Bath Session Organizer: Andrew Nix, West Virginia University Session Co-Chair: Kenichiro Takeishi, Tokushima Bunri University Session Chair: Manfred Klein, MA Klein & Associates, Ottawa Session Co-Chair: Mike Klassen Session Co-Organizer: Len Angello 8:00 Brush Seal Frictional Heat Generation: Test Rig Design and Validation Under Steam Environment GT Markus Raben, TU Braunschweig - Institute of Jet Propulsion and Turbomachinery, Braunschweig, Germany, Jens Friedrichs, TU Braunschweig Inst of Aircraft Propulsion & Turbomachinery, Braunschweig, Germany, Johan Flegler, Siemens AG, Power and Gas Division, Muelheim an der Ruhr, Germany The Effect of Particle Loading, Size, and Temperature on Deposition in a Vane Leading Edge Impingement Cooling Geometry GT Steven Whitaker, Blair Peterson, Alex Miller, The Ohio State University, Columbus, OH, United States, Jeffrey Bons, Ohio State Univ, Columbus, OH, United States Combustion Basics GT Mike Klassen, Combustion Science & Engineering Inc., Columbia, MD, United States 8:30 Characterization of Brush Seal Permeability GT Thomas Gresham, University of Virginia, Charlottesville, VA, United States, Brian Weaver, University of Virginia, Afton, VA, United States, Houston Wood, Univ Of Virginia, Charlottesville, VA, United States, Alexandrina Untaroiu, Virginia Tech, Blacksburg, VA, United States Experimental Investigation on Impingement Array Cooling Systems Through IR Thermography GT Lorenzo Tarchi, Ergon Research SRL, Firenze, Italy, Lorenzo Cocchi, Bruno Facchini, Lorenzo Winchler, University of Florence, Florence, Italy, Luca Innocenti, GE Oil & Gas, Florence, Italy, Luca Andrei, GE Oil&Gas, Firenze, Italy, Alessio Bonini, GE Oil & Gas, Florence, Italy, Sabrina Giuntini, University of Florence, Florence, Italy Emissions Prevention and Control GT Len Angello, Electric Power Research Institute, Palo Alto, CA, United States 9:00 Theoretical Analysis of the Static Characteristics of the Carbon Segmented Seal GT Mihai Arghir, Universite De Poitiers - Instit Pprime, D3, Futuroscope Chasseneuil 86962, France, Antoine Mariot, Institut PPRIME, Université de Poitiers, Futuroscope Chasseneuil, France Experimental Investigation of Heat Transfer Augmentation by Different Jet Impingement Hole Shapes Under Maximum Crossflow GT Prashant Singh, Bharath Viswanath Ravi, Virginia Tech, Blacksburg, VA, United States, Srinath Ekkad, Virginia Tech. University, Blacksburg, VA, United States 9:30 Experimental Analyses of a Static to Static Flex Seal and a Honeycomb Seal GT Thomas Zierer, Marcos Escudero-Olano, Cyrille Bricaud, Ansaldo Energia Switzerland Ltd., Baden, Switzerland, Joshua McNally, Afzal Pasha Mohammed, PSM, Jupiter, FL, United States An Experimental Investigation of Impingement Heat Transfer in Narrow Space With Full-Height Pin Fins GT Yu Rao, Shanghai JiaoTong University, Dept. Mechanical Eng, Shanghai, China, Chaoyi Wan, Yuyang Liu, Shanghai Jiao Tong University, Shanghai, Not Applicable, China, Jiang Qin, Harbin Institute of Technology, Harbin, China Emission Regulations GT Manfred Klein, MA Klein & Associates, Ottawa, ON, Canada FINAL PROGRAM 109

110 THURSDAY, JUNE 16 8:00-10:00 AM MARINE MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES OIL & GAS APPLICATIONS Applications & Controls Rotor Dynamics and Small Turbine Transient Behavior Multiphase Expanders and LNG Systems Paper Session Room 318A ThA Paper Session Room 308C ThA-23-2 Paper Session Room E5 ThA-24-5 Session Chair: Knox Millsaps, Office of Naval Research Session Co-Chair: Desiree Deshmukh, US Navy Session Chair: Kostandin Gjika, Honeywell Turbo Technologies Session Co-Chair: Jurg Schiffman, Ecole Polytechnique Federale de Lausanne Session Chair: Tim Allison, Southwest Research Institute Session Co-Chair: Rainer Kurz, Solar Turbines Incorporated 8:00 Selection and Development of the World s Most Power-Dense Gas Turbine Module for the New Korean Frigate GT Sangpil Lim, Rolls Royce Marine Korea, Busan, Korea (Republic), Adam Harvey, Rolls Royce Naval Marine, Bristol, United Kingdom Rotor-Dynamics of Different Shaft Configurations for a 6 kw Micro Gas Turbine for Concentrated Solar Power GT Antonio Arroyo, City University London, London, Click here, United Kingdom, Michael McLorn, Ceres Power Limited, Horsham, United Kingdom, Matthias Fabian, Martin White, Abdulnaser Sayma, City University London, London, Click here, United Kingdom A Novel Small Scale Liquefied Natural Gas Production Process at Filling Stations: Thermodynamic Analysis and Parametric Investigation GT Maria Alessandra Ancona, University of Bologna, Bologna, Italy, Michele Bianchi, University Of Bologna, Bologna 40136, Bologna, Italy, Francesco Melino, University of Bologna, Bologna, Italy, Andrea De Pascale, DIN - University Of Bologna, Bologna, Italy, Lisa Branchini, University of Bologna, Bologna, Italy, Marco Palella, Mario Mormile, Graf S.p.A., Nonantola (MO), Italy 8:30 Operational Experience of the SSS (Synchro-Self-Shifting) Clutch for Naval Marine Applications GT Morgan Hendry, S S S Clutch Co Inc, New Castle, DE, United States, Nicholas Bellamy, SSS Gears Ltd., Middlesex, United Kingdom Rotordynamic Performance of a Shaft With Large Overhung Mass Supported by Foil Bearings GT Nguyen LaTray, Daejong Kim, University of Texas at Arlington, Arlington, TX, United States Influence of Impeller Fairing Cone Geometry on Cavitating Flow Behavior in a Cryogenic Liquid Turbine Expander GT Ke Wang, Xi an Jiaotang Univ, Xi an, China, jinju sun, xi an jiaotong univ, xian, China, peng song, xian jiaotong univ, xian, China, changjiang huo, xi an jiaotong univ, xi an, China 9:00 An Alignment Monitoring Device for the Output Shaft of Marine Gas Turbine GT Wen Xue-You, Harbin Marine Blr & Turb Res Inst, Harbin Heilongjiang , China, XIAO Dong-ming, DONG Bin, Harbin Marine Boiler and Turbin Research Institue, Harbin, China, SONG Zi-gang, Harbin Marine Boiler and turbine Research Insititue, Harbin, China, KOU Dan, Haerbin Marine Boiler and Turbine Research Institute, Harbin, China Natural Cooling Affecting the Restart of Micro Gas Turbine GT Andrei Tisarev, Samara State Aerospace University, Samara, Russia, Christian Koch, Institute for Aircraft Propulsion Systems University Stuttgart, Stuttgart, Germany, Matthias Nagorski, Stephan Staudacher, Institute of Aircraft Propulsion Systems (ILA), Stuttgart University, Stuttgart, Germany, Sergey Falaleev, Samara State Aerospace University, Samara, Russia Numerical Study of Cavitating Flow in Two-Phase LNG Expander GT peng song, xian jiaotong univ, xian, China, jinju sun, xi an jiaotong univ, xian, China, Ke Wang, Xi an Jiaotang Univ, Xi an, China, Kaiqiang Li, Henan Electric Power Survey & Design Institute, Zhengzhou, China, changjiang huo, xi an jiaotong univ, xi an, China 9:30 A Review on Gas Turbine Anomaly Detection for Implementing Health Mangement GT Ningbo Zhao, Harbin Engineering University, Harbin, China, Xueyou Wen, Harbin Marine Boiler & Turbine Research Institute, Harbin, China, Shuying Li, Harbin Engineering University, Harbin, China Transient Performance Analysis of an Industrial Gas Turbine Operating on Low-Calorific Fuels GT Vrishika Singh, Delft University of Technology, Delft, Netherlands, Lars-Uno Axelsson, OPRA Turbines International B.V., Hengelo, Netherlands, Wilfried Visser, Delft University of Technology, Delft, Netherlands Cryogenic Turboexpanders in LNG Liquefaction Applications GT Matt Taher, Bechtel Oil & Gas Chemical, Houston, TX, United States, Cyrus Meher-Homji, Bechtel Corporation, Houston, TX, United States 110 ASME 2016 TURBO EXPO

111 THURSDAY, JUNE 16 8:00-10:00 AM STEAM TURBINES STRUCTURES & DYNAMICS: EMERGING METHODS IN DESIGN & ENGINEERING STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE PREDICTION LSB Design & Wetness Blade Design for Damping Crack Growth Modeling Paper Session Room E2 ThA-26-4 Tutorial Session Room E6 ThA-27-3 Paper Session Room 300 ThA Session Chair: Markus Schatz, University of Stuttgart Session Co-Chair: Shigeki Senoo, Mitsubishi Hitachi Power Systems, LTD Session Chair: Chris Hulme, General Electric (Switzerland) GmbH. Session Co-Chair: Nikola Kafedzhiyski, KTH Session Chair: Piotr Bednarz, GE Power Services Session Co-Chair: Richard Green, Solar Turbines Inc, Youri Lenets, Honeywell 8:00 8:30 9:00 9:30 Structural Optimization of Fir-Tree Root and Groove for Turbine Blade With Splines and Genetic Algorithm GT Deqi Yu, Shanghai Electric / Shanghai Turbine Works Co., Ltd., Shanghai, China, Fengwei Li, Dalian University of Technology, Dalian, China, Jiandao Yang, Shanghai Turbine Works Co., Ltd, Shanghai, China, Kai Cheng, Shanghai Electric/Shanghai Turbine Works Co.,Ltd., Shanghai, China, Weilin Shu, Kai Lv, Shanghai Electric/ Shanghai Turbine Works Co., Ltd., Shanghai, China, Ming Li, Dalian University of Technology, Dalian, China Multidisciplinary Optimization Design of Long Blade Turbine Stage Based on Parallel Self-Adaptive Multi-Objective Differential Evolution Algorithm GT Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China, Bin LI, Institute of Turbomachinery, Xi`An Jiaotong University, Xi`An, Shaanxi, Shaanxi, China, LIMING SONG, Xian Jiaotong University, Xian, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China Unsteady Flow Field and Coarse Droplet Measurements In The Last Stage Of A Low Pressure Steam Turbine With Supersonic Airfoils Near The Blade Tip GT Ilias Bosdas, Michel Mansour, ETH Zurich, Zurich, Switzerland, Anestis I. Kalfas, Aristotle University of Thessaloniki, Thessaloniki, Greece, Reza S. Abhari, ETH Zurich, Zurich, Switzerland, Shigeki Senoo, Mitsubishi Hitachi Power Systems, LTD, Ibaraki, Japan A Model for Liquid Films in Steam Turbines and Preliminary Validations GT Amelie Simon, Meryem Marcelet, Jean-Marc Herard, Jean-Marc Dorey, R&D EDF, Chatou, France, Michel Lance, LMFA, Ecully, France Blade Design for Damping GT Jaroslaw Szwedowicz, GE Power, Bad Zurzach Ch, Switzerland T U T O R I A L FE Analysis of the Effects of TGO Thickness and Interface Asperity on the Cracking Behavior Between the TGO and the Bond Coat GT Jishen Jiang, Bingqian XU, Weizhe Wang, RICHARD AMANKWA ADJEI, Xiaofeng ZHAO, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China A Thermo-Mechanical Fatigue Crack Growth Accumulative Model for Gas Turbine Blades and Vanes GT Andrea Riva, Ansaldo Sviluppo Energia, Genova, Italy, Alessio Costa, Ansalo Energia, Genoa, Italy, Dalila Dimaggio, Ansaldo Sviluppo Energia, Genova, Italy, Karl Michael Kraemer, Falk Mueller, Matthias Oechsner, Institut für Werkstoffkunde (IfW), Technische Universität Darmstadt, Darmstadt, Germany, Paolo Villari, Ansaldo Sviluppo Energia, Genova, Italy An Integrated Software Tool for High Fidelity Probabilistic Assessments of Metallic Aero-Engine Components GT R. Craig McClung, Southwest Research Inst, San Antonio, TX, United States, Paul Wawrzynek, Fracture Analysis Consultants, Inc., Ithaca, NY, United States, Yi-Der Lee, Southwest Research Institute, San Antonio, TX, United States, Bruce Carter, Fracture Analysis Consultants, Inc., Ithaca, NY, United States, Jonathan Moody, Southwest Research Institute, San Antonio, TX, United States, Michael Enright, Southwest Research Inst, San Antonio, TX, United States A Finite Element Study of the Effect of Crystal Orientation and Misalignment on the Crack Driving Force in a Single-Crystal Superalloy GT Christian Busse, Linköping University, Linköping, Sweden, Jordi Lourerio Homs, David Gustafsson, Frans Palmert, Siemens Industrial Turbomachinery AB, Finspång, Sweden, Bjorn Sjodin, Siemens Industrial Turbomachinery AB, FINSPONG, Sweden, Johan Moverare, Kjell Simonsson, Linköping University, Linköping, Sweden, Daniel Leidermark, Linköping University, Linkoping, Sweden FINAL PROGRAM 111

112 THURSDAY, JUNE 16 8:00-10:00 AM STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION & DAMPING SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS Turbomachine Aeroelasticity and Computational Methods 2 Materials for sco2 Cycles Flow Control for Stators Paper Session Room 307C ThA Session Chair: Sina Stapelfeldt, Rolls-Royce-Germany Session Co-Chair: Mehdi Vahdati, Imperial College London Tutorial Session Session Room 317B ThA Session Chair: Ganesan Subbaraman, Gas Technology Institute Paper Session Room 403 ThA Session Chair: Nick Nolcheff, Honeywell Session Co-Chair: Sam Grimshaw, University of Cambridge 8:00 Flutter Generation and Control Using Mistuning in a Turbine Rotating Rig GT Roque Corral, ITP, Alcobendas (Madrid), Spain, Josu Beloki, CTA, Zamudio, Spain, Paolo Calza, Avio Aero, Torino, Italy, Robert Elliott, Coquetdale Engineering Consultancy Ltd., UK, United Kingdom Application of Humpback Whale Flippers in an Annular Compressor Cascade GT Tan Zheng, Xiaoqing Qiang, Jinfang Teng, Jinzhang Feng, Shanghai Jiao Tong University, Shanghai, China 8:30 9:00 9:30 Investigations of Flutter and Aero Damping of a Turbine Blade: Part 1 Experimental Characterization GT Charles Seeley, General Electric Research and Development, Niskayuna, NY, United States, Xue Feng Zhang, GE GRC, Niskayuna, NY, United States, Wei-Min Ren, GE Global Research, Niskayuna, NY, United States, Christian Wakelam, GE Global Research, Garching, BY, Germany, Douglas Hofer, GE Global Research, Niskayuna, NY, United States Investigations of Flutter and Aero Damping of a Turbine Blade: Part 2 Numerical Simulations GT Charles Seeley, General Electric Research and Development, Niskayuna, NY, United States, Wei-Min Ren, GE Global Research, Niskayuna, NY, United States, Xue Feng Zhang, GE GRC, Niskayuna, NY, United States, brian mitchell, hongbin ju, ge global research, niskayuna, NY, United States Shock Structure, Mode Shape, and Geometric Considerations for Low-Pressure Turbine Flutter Suppression GT Joshua Waite, Robert Kielb, Duke University, Durham, NC, United States T U T O R I A L Active Flow Control on a Highly Loaded Compressor Stator Cascade With Synthetic Jets GT Yong Qin, Ruoyu Wang, Yanping Song, Fu Chen, Huaping Liu, Harbin Institute of Technology, Harbin, China Flow Control Investigations of Steady and Pulsed Jets in Bowed Compressor Cascades GT Longting Li, Yanping Song, Fu Chen, Huaping Liu, Harbin Institute of Technology, Harbin, China Constrained Repetitive Model Predictive Control Applied to an Unsteady Compressor Stator Vane Flow GT Simon J. Steinberg, Technische Universität Berlin, Berlin, Germany, Marcel Staats, TU Berlin, Berlin, Berlin, Germany, Wolfgang Nitsche, Rudibert King, Technische Universität Berlin, Berlin, Germany 112 ASME 2016 TURBO EXPO

113 THURSDAY, JUNE 16 8:00-10:00 AM TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY URBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS Unsteady Flows Novel Steady and Unsteady Methods Radial Compressors - Performance & Leakage Aspects Paper Session Room 327 ThA-38-8 Paper Session Room E1 ThA-39-7 Paper Session Room E4 ThA Session Chair: Ken-ichi Funazaki, Iwate University Session Co-Chair: Naoki Tani, IHI corporation, Nishitama-gun Session Chair: Andrea Milli, Generla Electric Aviation Session Co-Chair: Francesco Montomoli, Imperial College London Session Chair: Daniel Rusch, ABB Turbo Systems Ltd Session Co-Chair: Satoshi Ohuchida, IHI Corporation 8:00 On the Unsteady Interaction Between the Leakage and the Main Passage Flow in a High Pressure Turbine Rig: CFD URANS Investigations and Comparison With the Rig Test Data GT Giulio Zamboni, Paolo Adami, Rolls-Royce plc, Derby, United Kingdom Implementation and Validation of the Harmonic Balance Method for Temporally Periodic NonLinear Flows GT Hrvoje Jasak, Gregor Cvijetic, University of Zagreb, Zagreb, Croatia (Hrvatska) On the Influence of a Hubside Exducer Cavity and Bleed Air in a Close-Coupled Centrifugal Compressor Stage GT Peter Kaluza, University of Aachen, Aachen, Germany, Christian Landgraf, Insitute of Jet Propulsion, RWTH Aachen, Aachen, Germany, Philipp Schwarz, RWTH - Aachen, Aachen, Germany, Peter Franz Jeschke, RWTH Aachen University, Aachen, Germany, Caitlin Smythe, GE Aviation, Lynn, MA, United States 8:30 Unsteady Flow Physics and Performance Prediction of a MA-1-1/2 Stage Unshrouded High Work Turbine Using the Lattice Boltzmann Approach GT Ignacio Gonzalez-Martino, EuroXA - Exa Corporation, Paris, France, Sebastien Gautier, Exa GmbH, Munich, Germany On the Extension of a Harmonic Balance Method for the Simulation of Compressor Casing Treatments GT Christian Voigt, German Aerospace Center (DLR), Cologne, Germany, Graham Ashcroft, DLR, Cologne, Germany Effects of Impeller Squealer Tip on Centrifugal Compressor Performance GT Riccardo Da Soghe, Cosimo Bianchini, Ergon Research, Firenze, Italy, Lorenzo Toni, GE Oil&Gas, Florence, Italy, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy 9:00 CFD Analysis of the Unsteady Flow in a Two-Stage Axial Turbine GT Yang Pan, Xi an JiaoTong university, Xi an, Shaanxi, China, Qi YUAN, Institute of Turbomachinery, Xi an Jiaotong University, Xi an, Shaanxi, China, Qian Chen, Xi an JiaoTong university, Xi an, Shaanxi, China, Qing Ge, daiwei ji, Shanghai Electric Power Generation Equipment Co., Ltd. Shanghai Turbine Plant, Shanghai, China Filtering Mixing Planes for Low Reduced Frequency Analysis of Turbomachines GT Graham Pullan, John J Adamczyk, University of Cambridge, Cambridge, United Kingdom The Role of Impeller Outflow Conditions on the Performance of Vaned Diffusers GT Jonathan Everitt, Massachusetts Institute of Technology, Cambridge, MA, United States, Zoltan Spakovszky, Mass Inst of Tech, Cambridge, MA, United States, Daniel Rusch, ABB Turbo Systems Ltd, Baden, Switzerland, Jurg Schiffman, Ecole Polytechnique Federale de Lausanne, Neuchatel, Switzerland 9:30 Impact of the Expansion Ratio on the Unsteady Aerodynamics and Performance of a HP Axial Turbine GT Paolo Gaetani, Giacomo Persico, Andrea Spinelli, Alessandro Mora, Politecnico Di Milano, Milano, Italy Development of a Comprehensive Model for Plasma Actuation in 3D-RANS-Simulations GT Roland Matzgeller, MTU Aero Engines AG, Muenchen, Germany, Alexander Bleh, Daniela Klaubert, Technische Universität Darmstadt, Institute of Gas Turbines and Aerospace Propulsion, Darmstadt, Germany Influence of Reynolds Number on the Performance of Process Centrifugal Compressors GT Yan Liu, Lihua Tao, Dalian University of Technology, Dalian, China, Jian Wang, Yang Wang, Xuejun Wang, Shenyang Blower Works Group Co. Ltd, ShenYang, China, Wei Wang, Dalian University of Technology, DaLian, China FINAL PROGRAM 113

114 THURSDAY, JUNE 16 8:00-10:00 AM WIND ENERGY Data Analytics for Wind Energy Applications Tutorial Session Room 402 ThA Session Chair: Yu Ding, Texas A&M University Data Analytics For Wind Energy Applications GT Yu Ding, Texas A&M University, College Station, TX, United States 8:00 T U 8:30 T O 9:00 R I A 9:30 L 114 ASME 2016 TURBO EXPO

115 THURSDAY, JUNE 16 10:15 AM - 12:15 PM AIRCRAFT ENGINE CERAMICS COMBUSTION, FUELS & EMISSIONS Introduction to Aero Engine Conceptual Design and Technological Perspectives Ceramic Matrix Composites: Properties and Performance Combustion Modeling: Large Eddy Simulations Tutorial Session Room E6 ThB-1-4 Paper Session Room 318A ThB- 2-1 Paper Session Room 317C ThB-4-26 Session Chair: Konstantinos Kyprianidis, Mälardalen University Session Chair: Gregory Morscher, The University of Akron Session Co-Chair: Sung Choi, Naval Air Systems Command Session Chair: Thomas Schmitt, EM2C laboratory, CNRS, Ecole Centrale Paris, Chatenay-Malabry 10:15 Introduction to Aero Engine Conceptual Design and Technological Perspectives GT Konstantinos Kyprianidis, Mälardalen University, Västerås, Sweden Electrical Resistance and Acoustic Emission During Fatigue Testing of Pristine and High Velocity Impact SiC/SiC Composites at Room and Elevated Temperature GT Zipeng Han, University of Akron, Akron, OH, United States, Gregory Morscher, The University of Akron, Akron, OH, United States, Emmanuel Maillet, GE Global Research, Niskayuna, NY, United States, Manigandan Kannan, University of Akron, Akron, OH, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States, Frank Abdi, Alpha Star Corp, Long Beach, CA, United States A LES-LEM Study of Preferential Diffusion Processes in a Partially Premixed Swirling Combustor With Synthesis Gases GT Shaoshuai Li, Yunzhe Zheng, Tsinghua University, Beijing, China, Daniel Mira Martinez, BSC-CNS, Barcelona, Cataluna, Spain, Suhui Li, Tsinghua University, Beijing, China, Min Zhu, Tsinghua U., Beijing, China, Xi Jiang, Lancaster University, Lancaster, United Kingdom 10:45 11:15 11:45 T U T O R I A L The Application of Ceramic Matrix Composite to Low Pressure Turbine Blade GT Fumiaki WATANABE, Takeshi Nakamura, Kenichi Shinohara, IHI Corporation, Tokyo, Japan Development And Test of Oxide/Oxide CMC Combustor Liner Demonstrators for Aero Engines GT Thomas Behrendt, DLR, Koeln, Germany, Stefan Hackemann, Peter Mechnich, DLR German Aerospace Center, Koeln, Germany, Yuan Shi, Sandrine Hoenig, Severin Hofmann, DLR German Aerospace Center, Stuttgart, Germany, Dietmar Koch, German Aero.Center, Inst. of Str. and Design, Stuttgart, Germany Foreign Object Damage in an Oxide/Oxide Ceramic Matrix Composite (CMC) Under Prescribed Tensile Loading GT Nesredin Kedir, David Faucett, Luis Sanchez, NAVAIR, Patuxent River, MD, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States Large Eddy Simulation of a Realistic Gas Turbine Combustor GT Baopeng Xu, Ya Liu, Rong Xie, Dalian University of Technology, Dalian, Liaoning, China CFD Modeling of Equivalence Ratio Variation Effects on a Pressurized Turbulent Premixed Flame GT Sandeep Jella, Siemens AGT, Montreal, QC, Canada, Jeffrey M. Bergthorson, McGill University, Montreal, QC, Canada, Pierre gauthier, Siemens Canada Limited, Montreal, QC, Canada, Gilles Bourque, Siemens Canada Limited, Dorval, QC, Canada FINAL PROGRAM 115

116 THURSDAY, JUNE 16 10:15 AM - 12:15 PM COMBUSTION, FUELS & EMISSIONS CONTROLS, DIAGNOSTICS & INSTRUMENTATION EDUCATION Jet-in-crossflow & Swirling Flows Moving to "More Electric" Engines Education Paper Session Room 308B ThB-4-30 Tutorial Session Room E3 ThB-5-11 Paper Session Room 318B ThB- 7-3 Session Chair: Antonio Andreini, University of Florence Session Chair: Noriko Morioka, IHI Corporation, Engine Technology Dept., New Technology Project Gr. Session Chair: Dr. Cengiz Camci, Penn State University Session Co-Chair: Dr. Vassilios Pachidis, Cranfield University 10:15 Impact of Swirling Flow Structure on Shear Layer Vorticity Fluctuation Mechanisms GT Benjamin Mathews, Samuel Hansford, Pennsylvania State University, University Park, PA, United States, Jacqueline O Connor, Pennsylvania State University,, University Park, PA, United States Moving to "More Electric" Engines Tutorial. GT Noriko Morioka, IHI Corporation, Engine Technology Dept., New Technology Project Gr., Tokyo, Japan A Laboratory Based Course on Energy Systems in an Mechanical Engineering Undergraduate Program GT Sabri Deniz, Lucerne University of Applied Sciences, HORW, Switzerland 10:45 11:15 11:45 Methods for the Extraction and Analysis of the Global Mode in Swirling Jets Undergoing Vortex Breakdown GT Lothar Rukes, TU Berlin, Berlin, Germany, Moritz Sieber, Institute of Fluid Dynamics and Technical Acoustics, H.F.I, TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Kilian Oberleithner, Chair of Fluid Dynamics, Institute of Fluid Dynamics and Technical Acoustics/ TU Berlin, Berlin, Germany Advanced Identification of Coherent Structures in Swirl-Stabilized Combustors GT Moritz Sieber, Institute of Fluid Dynamics and Technical Acoustics, H.F.I, TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Kilian Oberleithner, Chair of Fluid Dynamics, Institute of Fluid Dynamics and Technical Acoustics/ TU Berlin, Berlin, Germany Flow Dynamics in Single and Multi-Nozzle Swirl Flames GT Travis Smith, Georgia Institute of Technology, Atlanta, GA, United States, Benjamin Emerson, Georgia Institute of Tech, Atlanta, GA, United States, Ianko Chterev, Ben T. Zinn Combustion Laboratory, Atlanta, GA, United States, David Noble, Georgia Inst Tech, Marietta, GA, United States, Tim Lieuwen, Georgia Institute of Technology, Atlanta, GA, United States T U T O R I A L Experiences From Changing the Study Platform of Turbomachinery Course From Blended Education to Problem Based Learning GT Aki Grönman, Jari Backman, Ahti Jaatinen-Värri, Kaisa Grönman, Lappeenranta University of Technology, Lappeenranta, Lappeenranta, Finland A Simple Model for Thermodynamic Properties of Air and Combustion Gases for Educational Purposes GT Milan Banjac, Srdjan Milic, Milan Petrovic, University of Belgrade, Belgrade, Serbia Hydrodynamic Torque Converters for Oil and Gas Compression and Pumping Applications: Basic Principles, Performance Characteristics and Applications GT Klaus Brun, Southwest Research Institute, San Antonio, TX, United States 116 ASME 2016 TURBO EXPO

117 THURSDAY, JUNE 16 10:15 AM - 12:15 PM ELECTRIC POWER FANS & BLOWERS HEAT TRANSFER: NUMERICAL INTERNAL COOLING Gas Turbine Technology Development Design Methods and Optimization Numerical Internal Cooling: Ribs, Pin Fins, and Pedestals - II Paper Session Room 402 ThB-8-8 Paper Session Room 308C ThB- 9-1 Paper Session Room 301 ThB-11-3 Session Chair: Richard Dennis, US Dept Of Energy Session Co-Chair: Robin Ames, DoE National Energy Technology Lab Session Chair: Sybrand J. van der Spuy, Stellenbosch University Session Co-Chair: Massimo Masi, University of Padova - DTG Session Organizer: Changmin Son, Pusan National University Session Co-Organizer: Zhirui Dong, GE Power & Water 10:15 Flexible Combined Cycle Gas Turbine Power Plant utilising Organic Rankine Cycle technology GT Mike Welch, Siemens Energy Oil & Gas, Lincoln, United Kingdom, Nicola Rossetti, Turboden, Brescia, Italy A Criterion for the Preliminary Design of High-Efficiency Tube-Axial Fans GT Massimo Masi, University of Padova - DTG, Vicenza, Italy, Stefano Castegnaro, University of Padova, Padova, Italy, Andrea Lazzaretto, Università di Padova - DII, Padova, Italy Evaluation of the SST-SAS Model for Prediction of Separated Flow Inside Turbine Internal Cooling Passages GT Piotr Zacharzewski, The University of Nottingham, Nottingham, United Kingdom, Kathy Simmons, University of Nottingham, Nottingham, United Kingdom, Richard Jefferson-Loveday, The University of Nottingham, Nottingham, United Kingdom, Luigi Capone, Rolls-Royce, plc., Derby, United Kingdom 10:45 11:15 Development of Next Generation Gas Turbine Combined Cycle System GT Hiroyuki Yamazaki, Masahiro Abe, Tohoku Electric Power Co., Inc., Sendai, Miyagi, Japan, Yoshiaki Nishimura, Tohoku Electric Power Co., Inc, Sendai, Miyagi, Japan, Junichiro Masada, Mitsubishi Hitachi Power Systems,LTD., Takasago, Hyogo, Japan, Satoshi Hada, Mitsubishi Hitachi Power Systems Co. Ltd., Takasago City, Hyogo, Japan, Kazumasa Takata, Mitsubishi Hitachi Power Systems,LTD., Takasago, Hyogo, Japan Beyond Brayton Cycle: It Is Time to Change the Paradigm GT Seyfettin Can Gülen, Bechtel, Frederick, MD, United States Aerodynamic and Acoustic Performance of a Single Stage Axial Fan With Extensive Blade Sweep Designed to Limit Noise Emissions GT Daniel Giesecke, TU Braunschweig, Braunschweig, Germany, Jens Friedrichs, TU Braunschweig Inst of Aircraft Propulsion & Turbomachinery, Braunschweig, Germany, Udo Stark, TU Braunschweig Institut of Fluid Mechanics, Braunschweig, NDS, Germany, Maik Dierks, AKG Thermotechnik International GmbH & Co. KG, Hofgeismar, Germany Aeroacoustic Optimization of Radial Fans for Medical Applications GT Michael Stadler, Ninsight, Graz, Austria, Julien Grilliat, Wolfgang Laufer, ebm-papst St. Georgen GmbH & Co.KG, St. Georgen, Germany, Michael Schmitz, Ebm-Papst St Georgen Gmbh & Co KG, St Georgen, Germany Design for Additive Manufacturing: Internal Channel Optimization GT Marco Pietropaoli, Imperial College of London, London, Please choose..., United Kingdom, Richard Ahlfeld, Francesco Montomoli, Imperial College London, London, United Kingdom, Alessandro Ciani, General Electric, firenze, FI, Italy, Michele D Ercole, GE Oil & Gas, Florence, Italy Numerical Investigation of Heat Transfer in a High Aspect Ratio Double Wall Channel With Pin Fin and Jet Array Impingement GT Rui Kan, AVIC COMMERCIAL AIRCRAFT EN- GINE CO,LTD., Shanghai, China, Shuqing Tian, AVIC COMMERCIAL AIRCRAFT ENGINE, Shanghai, China 11:45 Application of Latest Gas Turbine Technologies and Verification Results GT Yoshiaki Nishimura, Tomoyuki Sugawara, Kazuyuki Tada, Tohoku Electric Power Co., Inc, Sendai, Miyagi, Japan, Junichiro Masada, Mitsubishi Hitachi Power Systems,LTD., Takasago, Hyogo, Japan, Toshishige Ai, Tatsuya Iwasaki, Mitsubishi Hitachi Power Systems, LTD, Takasago, Hyogo, Japan Fan Blade Design Methods: Cascade versus Isolated Airfoil Approach - Experimental and Numerical Comparison GT Stefano Castegnaro, University of Padova, Padova, Italy Numerical Investigation of Impingement Heat Transfer on Concave- and Convex-Dimpled Plate With Different Dimple Arrangements GT Feng Zhang, Xi an Jiaotong University, Xi an, China, XINJUN WANG, Xian Jiaotong University, Xian, China, Jun Li, Xi an Jiaotong University, Xi an, China, Rui Tan, Dongliang Wei, Dong Fang Turbine Co., Ltd, Deyang, China FINAL PROGRAM 117

118 THURSDAY, JUNE 16 10:15 AM - 12:15 PM HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) HEAT TRANSFER: EXPERIMENTAL FILM COOLING MANUFACTURING MATERIALS & METALLURGY Leaf and Miscellaneous Seals Hole Geometry Effects-3 Life Extension of Gas Turbine Components Paper Session Room 307A ThB Paper Session Room 307B ThB Panel Session Room 401 ThB-21-7 Session Organizer: Neelesh Sarawate, GE Global Research Session Co-Chair: Paul Cooper, Alstom Power Limited Session Chair: Beni Cukurel, Technion - Israel Institute of Technology Session Co-Organizer: Salam Azad, Siemens Session Chair: Sungho Chang, KEPCO, Session Co-Chair: Scott Yandt, National Research Council Canada 10:15 CFD and Thermal Analysis of Leaf Seals for Aero-Engine Application GT Vincenzo Fico, Michael Pekris, Rolls-Royce plc, Derby, United Kingdom, Christopher J. Barnes, Rolls-Royce plc., Derby, United Kingdom, Rakesh K. Jha, QuEST Global, Bengaluru, India, David Gillespie, Osney Mead Industrial Estate/University of Oxford, Oxford, United Kingdom Hydrodynamic Measurements Throughout a Flat Plate Multi-Row Film Cooling Array With Inclined Holes GT Greg Natsui, Michael T Voet, Zachary Little, Erik Fernandez, University of Central Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Jason Dees, GE Global Research, Niskayuna, NY, United States Component Life Extension Using Advanced Materials Technologies GT Dheepa Srinivasan, GE Power, Bangalore, Karnataka, India 10:45 11:15 Low-Leakage Shaft End Seals for Utility-Scale Supercritical CO2 Turboexpanders GT Rahul A. Bidkar, General Electric Global Research, Niskayuna, NY, United States, Edip Sevincer, GE Global Research Center, Niskayuna, NY, United States, Jifeng Wang, General Electric Global Research, Niskayuna, NY, United States, Azam Thatte, GE, Niskayuna, NY, United States, Andrew Mann, Maxwell Peter, General Electric Global Research, Niskayuna, NY, United States, Grant Musgrove, Tim Allison, Jeff Moore, Southwest Research Institute, San Antonio, TX, United States Analytical Modeling and Experimental Validation of Heating at the Leaf Seal/ Rotor Interface GT Michael Pekris, Gervas Franceschini, Rolls- Royce Plc, Derby, United Kingdom, Andrew K. Owen, Oxford University, Oxford, Oxfordshire, United Kingdom, Terry Jones, University of Oxford, Oxford, United Kingdom, David Gillespie, Osney Mead Industrial Estate/University of Oxford, Oxford, United Kingdom Adiabatic Film Cooling Effectiveness Measurements Throughout Multi-Row Film Cooling Arrays GT Greg Natsui, Zachary Little, University of Central Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Anthony Socotch, General Electric, West Chester, OH, United States, Anquan Wang, GE Aviation, Cincinnati, OH, United States, Jason Dees, GE Global Research, Niskayuna, NY, United States Accuracy of Superposition Predictions of Film Cooling Effectiveness on a Flat Plate With Double Rows of Holes GT Tong Meng, Northwestern Polytechnical University, Xi an Shaanxi, China, Hui-ren Zhu, Cunliang Liu, Northwestern Polytechnical University, Xi an, China, Qiang Yu, Northwestern Polytechnical University, Xi an Shaanxi, China, Jiansheng Wei, Northwestern Polytechnical University, Xi an, China Rotor Life Extension of Land Based Gas Turbines GT Maxine Watson, Quest Integrity Group, LL.C, Lower Hutt, New Zealand Qualification Of Crack Growth Models for the Life Extension of Rotors GT Avisekh Banerjee, Life Prediction Technologies Inc., Ottawa, ON, Canada 11:45 Experimental Characterization of Rotor Convective Heat Transfer Coefficients in the Vicinity of a Leaf Seal GT Juan-Diego P Garcia, University of Oxford, OXFORD, United Kingdom, Michael Pekris, Rolls-Royce Plc, Derby, United Kingdom, Leonid Ganin, University of Oxford, Oxford, United Kingdom, Gervas Franceschini, Rolls- Royce plc, Derby, United Kingdom, David Gillespie, Osney Mead Industrial Estate/University of Oxford, Oxford, United Kingdom An Experimental Investigation of Full-Coverage Film Cooling Effectiveness and Heat Transfer Coefficient of a Turbine Guide Vane in a Linear Transonic Cascade GT Zhong-yi Fu, Hui-ren Zhu, Cunliang Liu, Cong Liu, Zheng Li, Northwestern Polytechnical University, Xi an, Shanxi, China Use of Advanced Coatings for the Life Extension of Gas Path Components GT Purusottam Sahoo, ASM, LLC, Houston, TX, United States 118 ASME 2016 TURBO EXPO

119 THURSDAY, JUNE 16 10:15 AM - 12:15 PM OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS Wet Gas Compression Steam Flow Modeling Squeeze Film Dampers & Bearings Tutorial Session Room E5 ThB Paper Session Room E2 ThB-26-9 Paper Session Room 300 ThB Session Chair: Grant Musgrove, Southwest Research Institute Session Chair: Sean Jenkins, GE Global Research Session Co-Chair: Joerg Starzmann, Cambridge University Engineering Department Session Chair: Jason Wilkes, Southwest Research Institute Session Co-Chair: Ilmar Ferreira Santos, Technical University of Denmark 10:15 10:45 T U T Influence of Turbulence Modelling to Condensing Steam Flow in the 3D Low-Pressure Steam Turbine Stage GT Yogini Patel, Giteshkumar Patel, Teemu Turunen-Saaresti, Lappeenranta University of Technology, Lappeenranta, Finland Numerical Investigation of Boundary Layers in Wet Steam Nozzles GT Joerg Starzmann, Fiona R. Hughes, Alexander J. White, Cambridge University Engineering Department, Cambridge, United Kingdom, Marius Gruebel, ITSM University of Stuttgart, Stuttgart, Germany, Damian Vogt, University of Stuttgart, Stuttgart, Germany Transient Response of a Short-Length (L/ D=0.2) Open-Ends Elastically Supported Squeeze Film Damper: Centered and Largely Off-Centered Whirl Motions GT Luis San Andres, Sean Den, Texas A & M Univ, College Station, TX, United States, Sung-Hwa Jeung, Texas A&M University, College Station, TX, United States Response of a Squeeze Film Damper-Elastic Structure System to Multiple and Consecutive Impact Loads GT Luis San Andres, Texas A & M Univ, College Station, TX, United States, Sung-Hwa Jeung, Texas A&M University, College Station, TX, United States O 11:15 11:45 R I A L Non-Realizability Problem With Quadrature Method of Moments in Wet-Steam Flows and Solution Techniques GT Ali Afzalifar, School of Energy Systems, Lappeenranta University of Technology, Lappeenranta, Finland, Teemu Turunen-Saaresti, Aki Grönman, Lappeenranta University of Technology, Lappeenranta, Finland Oil Scoop Simulation and Analysis Using CFD and SPH GT Evgenia Korsukova, Arno Kruisbrink, Herve Morvan, University of Nottingham, Nottingham, United Kingdom, Paloma Paleo Cageao, Gas Turbine Transmissions Research Centre, Nottingham, United Kingdom, Kathy Simmons, University of Nottingham, Nottingham, United Kingdom Oil-Air Flow Between the Cage and Inner Race of an Aeroengine Bearing GT Akinola A. Adeniyi, University of Central Lancashire, Preston, Lancs, United Kingdom, Herve Morvan, Kathy Simmons, University of Nottingham, Nottingham, Notts., United Kingdom FINAL PROGRAM 119

120 THURSDAY, JUNE 16 10:15 AM - 12:15 PM STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION & DAMPING SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS Turbomachine Aeroelasticity and Computational Methods 3 Heat Exchangers for Supercritical CO2 Power Cycles Stall Paper Session Room 307C ThB Tutorial Session Room 317B ThB-36-8 Paper Session Room 318C ThB Session Chair: Heinrich Stueer, Siemens Power Generation Session Co-Chair: Sunil Patil, ANSYS Inc Stefan Schmitt, Siemens AG Session Chair: Grant Musgrove, Southwest Research Institute Session Chair: Anna M. Young, University of Cambridge 10:15 Evaluation of Tortion Axis Positon on Turbine Blade Flutter by Direct Measurement Experiment - Rig Design and Numerical Simulation - GT Naoki Tani, IHI corporation, Nishitama-gun, Tokyo, Japan, Mizuho Aotsuka, IHI Corporation, Tokyo, Japan, Junichi Kazawa, Japan Aerospace Exploration Agency, Tokyo, Japan Tutorial: Heat Exchangers for Supercritical CO2 Power Cycles GT Grant Musgrove, Southwest Research Institute, San Antonio, TX, United States, Shaun Sullivan, Brayton Energy LLC, Hampton, NH, United States, Dereje Shiferaw, Heatric, Poole, Dorset, United Kingdom T Modeling for Tip Clearance Effects on Stall-Onset Condition in Transonic Axial Compressors GT Shubo Ye, Xi an Jiaotong University, Xi an, Shaanxi, China, Qingjun Zhao, Xiaorong Xiang, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Guang Xi, Xi an Jiaotong University, Xi an, Shaanxi Province, China, Jianzhong Xu, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China 10:45 A Low Speed Compressor Test Rig for Flutter Investigations GT Leonie Malzacher, TU Berlin, Berlin, Germany, Dieter Peitsch, Technische Universität Berlin, Berlin, Berlin, Germany, Holger Hennings, DLR - German Aerospace Center, Goettingen, Germany, Silvio Geist, Technische Universität Berlin, Berlin, Berlin, Germany U T Delayed Detached Eddy Simulation of Rotating Stall for a Full Annulus Transonic Axial Compressor Stage GT Jiaye Gan, University of Miami, Coral Gables, FL, United States, Hong-Sik Im, Honeywell, Torrance, CA, United States, Gecheng Zha, University of Miami, Coral Gables, FL, United States O 11:15 11:45 Aerodynamic Damping Predictions for Oscillating Airfoils in Cascades Using Moving Meshes GT Ron-Ho Ni, Michael Ni, William Humber, Vincent Capece, John Clark, Michael Ooten PU-Accelerated Compressible Rans Solver for Fluid-Structure Interaction Simulations in Turbomachinery GT Andrea Gadda, Polimi, Milano, Italy, Luca Mangani, HSLU, HORW, Switzerland, Magnus Fischer, ABB Turbo Systems Ltd, Baden, Switzerland, Ernesto Casartelli, Hochschule Luzern Technik & Architektu, Horw, Switzerland, Giulio Romanelli, HSLU, Horw, Switzerland, Paolo Mantegazza, Polimi, Milano, Italy R I A L Visualizations of Flow Structures in the Rotor Passage of an Axial Compressor at the Onset of Stall GT Huang Chen, Yuanchao Li, Johns Hopkins University, Baltimore, MD, United States, David Tan, Johns Hopkins University, Columbia, MD, United States, Joseph Katz, Johns Hopkins University, Baltimore, MD, United States Linear to Nonlinear Transition During the Spike Stall Process in a Low Speed Axial Flow Compressor Rotor GT Yuping QIAN, Yuzhi JIN, Weilin ZHUGE, Tsinghua University, Beijing, China, Yajun LU, Beihang University, Beijing, China, Yangjun ZHANG, Tsinghua University, Beijing, China 120 ASME 2016 TURBO EXPO

121 THURSDAY, JUNE 16 10:15 AM - 12:15 PM TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS Specific studies in turbine aerodynamics I Fan and Compressor Applications Radial Compressors - Industrial Applications Paper Session Room 327 ThB Paper Session Room E1 ThB-39-8 Paper Session Room E4 ThB Session Chair: Ardeshir Riahi, Honeywell Session Co-Chair: Khosro Molla Hosseini, Honeywell Session Chair: Mahmoud Mansour, Honeywell Aerospace Session Co-Chair: Sanjay Hingorani, Parametric Solutions Inc. Session Chair: Michele Marconcini, University of Florence Session Co-Chair: Asad Asghar, Royal Military College Of Canada 10:15 10:45 Flat-Plate Boundary Layers in Accelerated Flow GT Pascal Bader, Graz University of Technology, Graz, Austria, Manuel Pschernig, Institute for thermal Turbomachinery and Machine dynamics, Graz University of Technology, Graz, Austria, Wolfgang Sanz, Jakob Woisetschlaeger, Franz Heitmeir, Graz University of Technology, Graz, Austria, Walter Meile, Guenter Brenn, Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, Graz, Austria Research on the Matching Relationship Between HPT and LPT of One and One- Half Vaneless Contra-Rotating Turbines GT Xiao Xu, Qingjun Zhao, Weiwei Luo, Fei Tang, Xiaolei Sun, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China Optimization of a Two-Stage Transonic Axial Fan to Enhance Aerodynamic Stability GT Sang-Bum Ma, Arshad Afzal, Inha University, Incheon, Korea (Republic), Kwang-yong Kim, Inha Univ, Incheon , Incheon, Korea (Republic), Jaeho Choi, Hanwha Techwin Co., Ltd., Seongnam-Si, Gyeonggi-Do, Korea (Republic), Wonsuk Lee, Hanwha Techwin Co., Seongnam-si, Korea (Republic) Assessment of Body Force Methodologies for the Analysis of Intake-Fan Aerodynamic Interactions GT William Thollet, Airbus, Toulouse, France, Guillaume Dufour, ISAE-Supaero, Toulouse, France, Florian Blanc, AIRBUS Operation SAS, Toulouse, France, Xavier Carbonneau, ISAE, Toulouse, France Numerical Investigation of the Flow Distortion Impact on a Refrigeration Centrifugal Compressor GT Feng Shen, United Technologies Research Center [China] Ltd., Shanghai, Shanghai, China, Lei Yu, United Technologies Research Center (China), Shanghai, China, William Cousins, United Technologies Research Center, Glastonbury, CT, United States, Vishnu Sishtla, UTC Climate Controls & Security, Manlius, NY, United States, Om Sharma, United Technologies Research Center, East Hartford, CT, United States Numerical and Experimental Investigation of Return Channel Vane Aerodynamics With 2D and 3D Vanes GT Andre Hildebrandt, Frederik Schilling, Man Diesel & Turbo SE, Oberhausen, Germany 11:15 Accounting for Uncontrolled Variations in Low-Speed Turbine Experiments GT Kathryn Evans, University of Cambridge, Whittle Laboratory, Cambridge, United Kingdom, John Longley, Cambridge University, Cambridge, OTHER, United Kingdom Body Force Modeling of the Aerodynamics of the Fan of a Turbofan at Windmill GT Guillaume Dufour, ISAE-Supaero, Toulouse, France, William Thollet, Airbus, Toulouse, France Design Exploration of a Return Channel for Multistage Centrifugal Compressors GT Vishal Jariwala, Louis Larosiliere, James Hardin, Elliott Group, Jeannette, PA, United States 11:45 Clocking in Low-Pressure Turbines GT Kathryn Evans, University of Cambridge, Whittle Laboratory, Cambridge, United Kingdom, John Longley, Cambridge University, Cambridge, OTHER, United Kingdom An Introduction of Aerodynamic Shape Optimization Platform for Compressor Blade GT Duan Yanhui, China Aerodynamics Research and Development Center, Mianyang, Sichuan, China, Wu Wenhua, Fan Zhaolin, Chen Ti, China Aerodynamics Research and Development Center, Mian Yang, China Design of a Centrifugal Turbo Compressor With the Working Fluid Water for the Operation in a Hybrid Sorption/Compression Heat Pump Cycle GT Thomas Eckert, Leo Dostal, University of Applied Sciences Munich, Munich, Germany, Martin Helm, University of Applied Sciences, Munich, Germany, Christian Schweigler, University of Applied Sciences Munich, Munich, Bavaria, Germany FINAL PROGRAM 121

122 THURSDAY, JUNE 16 10:15 AM - 12:15 PM TURBOMACHINERY: MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION & UNCERTAINTY QUANTIFICATION WIND ENERGY CYCLE INNOVATIONS Preliminary MDO and Parameterization Approaches Wind Turbine Simulations Introduction to Dynamic Analysis and Modelling of Plant Systems Paper Session Room 403 ThB-45-7 Paper Session Room 308A ThB-46-1 Tutorial Session Room 317A ThB-6-10 Session Chair: Marcus Meyer, Rolls- Royce Deutschland Session Chair: Alexandrina Untaroiu, Virginia Tech Session Co-Chair: Xiaodong Wang, North China Electric Power University Session Chair: Alberto Traverso, Univ Of Genova Session Co-Chair: Seyfettin Can Gülen, Bechtel, Kihyung Kim, GE Power and Water, Alessandro Ramaglia, Ansaldo Energia 10:15 10:45 11:15 11:45 Two-Dimensional Airfoil Shape Optimization using Highly Differentiable Splines and Evolution Strategies GT Jose M. Chaquet, Industria de Turbopropulsores S.A., Alcobendas (Madrid), Madrid, Spain, David Cadrecha, ITP, Alcobendas, Spain, Roque Corral, ITP, Alcobendas (Madrid), Spain, Guillermo Pastor, Industria de Turbopropulsores S.A., Alcobendas (Madrid), Madrid, Spain New Correlations for High-Pressure Turbine Housing and Shroud Segments GT Christian Savaria, École De Technologie Supérieure, Montreal, QC, Canada, Francois Garnier, Ecole De Technologie Supérieure, Montréal, QC, Canada, Patricia Phutthavong, Pratt & Whitney Canada, Montreal, QC, Canada, Hany Moustapha, Ecole Technologie Superieure, Montreal, QC, Canada Automated Thermal and Stress Preliminary Analyses Applied to a Turbine Rotor GT Maxime Moret, Ecole de Technologie Superieure, Verdun, QC, Canada, Alexandre Delecourt, Siemens Canada, Dorval, QC, Canada, Acher Igal Abenhaim, Pratt & Whitney Canada, Montreal, QC, Canada, Francois Garnier, Ecole De Technologie Supérieure, Montréal, QC, Canada, Hany Moustapha, Ecole Technologie Superieure, Montreal, QC, Canada Preliminary and Robust Design Analysis of a Solar Thermal Power Block GT Rodney Persky, Emilie Sauret, Queensland University of Technology, Brisbane, Queensland, Australia Coupling of an Unsteady Lifting Line Free Vortex Wake Code to the Aeroelastic HAWT Simulation Suite FAST GT Joseph Saverin, Technische Universitat Berlin, Berlin, Germany, David Marten, TU Berlin - ISTA, Berlin, Berlin, Germany, George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Christian Navid Nayeri, H.F.I. TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany An Unsteady Aerodynamics Model for Lifting Line Free Vortex Wake Simulations of HAWT and VAWT in QBlade GT Juliane Wendler, HFI / TU Berlin, Berlin, Germany, David Marten, TU Berlin - ISTA, Berlin, Berlin, Germany, George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Christian Navid Nayeri, H.F.I. TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany Effect of Turbulence and Transition Models on the CFD-Based Performance Prediction of Wind Turbines GT Benedikt Ernst, Leibniz Univ Hannover, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany, Florian Herbst, Gottfried Wilhelm Leibniz Universitaet Hannover, Hannover, Niedersachsen, Germany Spectra and Large Eddy Structures in the Double Log-Layer of a High Re Wind Turbine Array Boundary Layer GT Tanmoy Chatterjee, Yulia Peet, Arizona State University, Tempe, AZ, United States T U T O R I A L 122 ASME 2016 TURBO EXPO

123 THURSDAY, JUNE 16 2:30-5:30 PM AIRCRAFT ENGINE CERAMICS COAL, BIOMASS & ALTERNATIVE FUELS Numerical and Experimental Investigations of Aero-engine Oil System Components Ceramic Matrix Composites for Hot Section Parts Technologies And Facilities For Small To Micro Scale Chp From Biomass And Alternatives Fuels Paper Session Room E4 ThC-1-5 Tutorial Session Room 308B ThC- 2-3 Panel Session Room 401 ThC- 3-8 Session Chair: Jason H. Chetwynd-Chatwin, Rolls-Royce plc. Session Co-Chair: Guillermo Paniagua, Brian Nicholson Session Chair: Gregory Morscher, The University of Akron Session Co-Chair: Severin Hofmann, DLR German Aerospace Center Session Chair: Subith Vasu, University of Central Florida Session Co-Chair: Simone Colantoni, GE Oil & Gas, Devidasa Pai Gorte, GE Oil & Gas 2:30 Innovative Shallow Sump Customizations for Aero-Engine Bearing Chambers GT Budi Chandra, University of the West of England, Bristol, United Kingdom, Kathy Simmons, University of Nottingham, Nottingham, United Kingdom Combustion Tests on GT's Burners with Syngas Sesta Lab GT Guido Galgani, Sesta Lab, Radicondoli, SIENA, Italy, Giulio Grassi, Sesta Lab, Siena, Italy, Christian Romano, GE Oil&Gas, Firenze, Italy 3:00 3:30 4:00 4:30 5:00 Analytical and Numerical Solution of Reynold's Equation for Squeeze Film Dampers Executing Circular-Centered Orbits GT Sina Hamzehlouia, Kamran Behdinan, University of Toronto, Toronto, ON, Canada Experimental and Numerical Investigations on Oil Leakage Across Labyrinth Seals in Aero Engine Bearing Chambers GT Felix C. von Plehwe, Matthias B. Krug, Corina Hoefler, Hans-Jorg Bauer Experimental Study on Two-Phase Flows in Scavenge Pump for Aircraft Engine Oil System GT Laurent Ippoliti, Université Libre de Bruxelles, Brussels, Belgium, Olivier Berten, Universite de Libre de Bruxelles, Brussels, Belgium, Patrick Hendrick, Université Libre de Bruxelles, Bruxelles, Belgium Limitations of a State-of-the-Art Numerical Modelling Framework for Two- Phase Flow in Aero-Engine Air/Oil Separators GT Thiago Piazera de Carvalho, Herve Morvan, David Hargreaves, Laura Cordes, Corina Hoefler The Numerical Simulation of Multi- Scale Oil Films Using Coupled VOF and Eulerian Thin-Film Models GT Bruce Kakimpa, Herve Morvan, Stephen Hibberd, University of Nottingham, Nottingham, Nottinghamshire, United Kingdom T U T O R I A L Potential and Challenges for Super-critical CO2 Brayton Cycle as a CHP Solution for Alternative Fuels GT Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States Gas Turbine based concepts for small scale biomass and waste energy conversion with multiple CHP options GT Francesco Fantozzi, University of Perugia, Dip. Ingegneria Industriale, Perugia, Italy Overview of current S-CO2 power cycle technology development status GT Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic) GE O&G Waste Energy Recovery Technologies Landscape GT Paolo Del Turco, GE Oil & Gas, Impruneta, Firenze, Italy FINAL PROGRAM 123

124 THURSDAY, JUNE 16 2:30-5:30 PM COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS ELECTRIC POWER Combustion Dynamics: Dynamical Systems Approaches High Hydrogen Combustion Adapting to a Changing Market - Current Experiences Paper Session Room 317C ThC-4-24 Paper Session Room E3 ThC-4-27 Paper Session Room 318B ThC-8-6 Session Chair: Lipika Kabiraj, Chair of Fluid Dynamics, ISTA, TU Berlin Session Co-Chair: Hiroshi Gotoda, Tokyo University of Science Session Chair: Jacqueline O Connor, Pennsylvania State University Session Co-Chair: Fei Han, GE GRC Session Chair: Leonardo Torbidoni, Ansaldo Energia Session Co-Chair: Ali Baghchehsara, Hochschule Bremen 2:30 Noise-Induced Dynamics in the Subthreshold Region in Thermoacoustic Systems GT Aditya Saurabh, Lipika Kabiraj, Richard Steinert, Christian Oliver Paschereit NOx Correlation for an Industrial 10 MW Non-Premixed Gas Turbine Combustor for High Hydrogen Fuels GT Daniel Kroniger, RWTH Aachen University, Aachen, Germany, Manfred Wirsum, Rwth-Aachen University, Aachen, Germany, Atsushi Horikawa, Kunio Okada, Kawasaki Heavy Industries.Ltd GTBC, Akashi shi, Japan, Masahide Kazari, Kawasaki Heavy Industries, Ltd., Akashi, Japan Impact of Enhanced GT Air Filtration on Power Output and Compressor Efficiency Degradation GT Ulf Schirmeister, Frederick T. Mohr, General Electric (Switzerland) GmbH, Baden, Switzerland 3:00 3:30 4:00 Investigation of Ducted Inverse Nonpremixed Flame Using Dynamic Systems Approach GT Uddalok Sen, Tryambak Gangopadhyay, Chandrachur Bhattacharya, Arpan Misra, Suman Karmakar, Preetam Sengupta, Achintya Mukhopadhyay, Swarnendu Sen, Jadavpur University, Kolkata, West Bengal, India A Mutual Nearest Neighbours Based Chaotic Synchronization Index to Detect Thermo-Acoustic Coupling in Gas Turbine Combustion Instabilities GT Stefano Chiocchini, Roberto Camussi, Eugenio Giacomazzi, Tiziano Pagliaroli, Roma TRE University, Engineering Department Linear Growth Rate Estimation From Dynamics and Statistics of Acoustic Signal Envelope in Turbulent Combustors GT Nicolas Noiray, ETH Zurich, Zurich, Switzerland Hydrogen Enriched Combustion Testing of Siemens SGT-400 at High Pressure Conditions GT Kam-Kei Lam, Siemens Industrial Turbomachinery Ltd, Lincoln, United Kingdom, nishant parsania, Siemens Industrial Turbomachinery, Lincoln, United Kingdom Emissions of a Wet Premixed Flame of Natural Gas and a Mixture With Hydrogen at High Pressure GT Panagiotis Stathopoulos, Phoebe Kuhn, Steffen Terhaar, Juliane Wendler, Tom Tanneberger, Christian Oliver Paschereit, Christoph Schmalhofer, Peter Griebel, Manfred Aigner Large Eddy Simulation of a Multiple-Injection Dry Low NOx Combustor for Hydrogen-Rich Syngas Fuel at High Pressure GT Keita Yunoki, Tomoya Murota, Tomohiro Asai, Teruyuki Okazaki, Mitsubishi Hitachi Power Systems, Ltd., Ibaraki-ken, Japan MHPS F Class Gas Turbine Upgrade Verification Results GT Keita Fujii, Mitsubishi Hitachi Power Systems, Ltd., Takasago-shi, Japan, Naoki Sakagami, Osamu Ueda, MITSUBISHI HITACHI POWER SYSTEMS, Hyogo, Japan GT13E2 Low Part Load Operation: Extended Flexibility Down to 30% Load GT Fulvio Magni, Sebastiano Sorato, Frank Grimm, Marco Micheli, GE Power, Baden, OTHER, Switzerland Blade Damage in PowerGen Turbine Losses and Blade Health Monitoring GT Bin Zhou, FM Global, Norwood, MA, United States 4:30 5:00 Dynamical Properties of Combustion Instability in a Laboratory-Scale Gas-Turbine Model Combustor GT Hiroshi Gotoda, Tokyo University of Science, Tokyo, Japan, Kenta Hayashi, Ritsumeikan University, Kusatsu, Japan, Ryosuke Tsujimoto, Ritsumeikan University, Shiga, Japan, Shohei Domen, Ritsumeikan University, Kusatsu, Japan, Shigeru Tachibana, Japan Aerospace Exploration Agency, Tokyo, Japan Comparison of Numerical Combustion Models for Hydrogen and Hydrogen-Rich Syngas Applied for Dry-Low-NOx-Micromix Combustion GT Harald Funke, Nils Beckmann, Jan Keinz, FH Aachen University of Applied Sciences, Aachen, Germany, Sylvester Abanteriba, Royal Melbourne Institute of Technology, Melbourne, Victoria, Australia ISO 19859: Gas Turbine Applications - Requirements for Power Generation and How Standards Can Reduce Procurement Cost GT John H Macdonald, RWE Generation UK, Swindon, Wiltshire, United Kingdom Integration of Modern F, G, H and J class in Combined Cycle applications- an EPC Contractor perspective GT Vinod Kalianpur, Samsung C&T, seoul, Korea (Republic), Justin Zachary, samsung, Montgomery, OH, United States, byungsik so, Samsung C&T, seoul, Korea (Republic) 124 ASME 2016 TURBO EXPO

125 THURSDAY, JUNE 16 2:30-5:30 PM HEAT TRANSFER: GENERAL HEAT TRANSFER HEAT TRANSFER: EXPERIMENTAL INTERNAL COOLING HEAT TRANSFER: COMBUSTORS (WITH COMBUSTION, FUELS & EMISSIONS) Heat Transfer Enhancement Experimental Internal Cooling: Impingement Cooling I Combustor Heat Transfer Paper Session Room 307A ThC-13-2 Paper Session Room 307B ThC Paper Session Room 301 ThC Session Organizer: Ralph Volino, United States Naval Academy Session Co-Organizer: Randall Mathison, Ohio State Uni/gas Turbine Lab Session Organizer: Gregory Laskowski, GE Aviation Session Co-Organizer: Jason Dees, GE Global Research Session Chair: Anil Tolpadi, General Electric, Liberty Session Co-Chair: Nagaraja Rudrapatna, Honeywell 2:30 3:00 3:30 4:00 4:30 5:00 Experimental/Numerical Investigation of Crossover Jet Impingement in a Rib-Roughened Trailing-Edge Cooling Channel GT Mohammad Taslim, Fei Xue, Northeastern University, Boston, MA, United States Effects of Double Wall Cooling Configuration and Conditions on Performance of Full Coverage Effusion Cooling GT Nathan Rogers, Zhong Ren, Warren Buzzard, Brian Sweeney, Nathan Tinker, Phil Ligrani, Keith Hollingsworth, Fred Liberatore, Raj Patel, Hee-Koo Moon Non-Uniform Array Impingement on a Curved Surface GT John Harrington, Jahed Hossain, Christian Garrett, Wenping Wang, Jay Kapat, Steven Thorpe, Michael Maurer An Investigation of Coolant Within Serpentine Passages of a High-Pressure Axial Gas Turbine Blade GT Jeremy Nickol, Randall Mathison, Michael Dunn, Jong-shang Liu, Malak Malak Detailed Experimental Characterization of Heat Transfer Coefficient Over the Internal Cooling Passages of an Additive Manufactured Turbine Airfoil GT Sin Chien Siw, Ching-Pang Lee, Jae Um, Minking Chyu Experimental Validation of an Innovative Metallic Tile Holder System for a Ceramic Combustor Liner GT Riccardo Becchi, Emanuele Burberi, Bruno Facchini, Lorenzo Tarchi, Luca Abba Effect of Reynolds Number, Hole Patterns and Hole Inclination on Cooling Performance of an Impinging Jet Array: Part I Convective Heat Transfer Results and Optimization GT Weihong Li, Li Yang, Xueying Li, ing Ren, Hongde Jiang, Phil Ligrani Effect of Reynolds number, hole patterns, target plate thickness on cooling performance of an impinging jet array, part II: conjugate heat transfer results and optimization. GT Weihong Li, Li Yang, Xueying Li, Jing Ren, Hongde Jiang Effects of Rotation on Heat Transfer Due to Jet Impingement on Cylindrical Dimpled Target Surface GT Prashant Singh, Virginia Tech, Blacksburg, VA, United States, Srinath Ekkad, Virginia Tech. University, Blacksburg, VA, United States Experimental Investigation on Flow Resistance and Heat Transfer Coefficient of Internal Lamilloy GT Wei Zhang, Hui-ren Zhu, Guangchao Li, chunyu shang, Cunliang Liu Enhanced Convective Heat Transfer due to Dynamically Forced Impingement Jet Arrays GT Frank Haucke, Technische Universitaet Berlin, Institute of Aeronautics and Astronautics, Chair of Aerodynamics, Berlin, Germany, Wolfgang Nitsche, Technische Universität Berlin, Berlin, Germany, Dieter Peitsch, Technische Universitaet Berlin, Institute of Aeronautics and Astronautics, Chair of Aero Engines, Berlin, Germany Large Eddy Simulations of the Combustor Turbine Interface: Study of the Potential and Clocking Effects GT Charlie Koupper, Safran TURBOMECA, Bordes, France, Laurent Gicquel, Florent Duchaine, CER- FACS, Toulouse, France, Guillaume Bonneau, Safran TURBOMECA, Bordes, France Variations of Anchoring Pattern of a Bluffbody Stabilized Laminar Premixed Flame as a Function of the Wall Temperature GT Sandrine Berger, Turbomeca / CERFACS, Bordes, France, Stéphane Richard, Turbomeca, Bordes, France, Florent Duchaine, Laurent Gicquel, CER- FACS, Toulouse, France Hybrid RANS-LES Modeling of the Aero-Thermal Field in an Annular Hot Streak Generator for the Study of Combustor-Turbine Interaction GT Antonio Andreini, Tommaso Bacci, Massimiliano Insinna, Lorenzo Mazzei, Simone Salvadori, University of Florence, Florence, Italy Study of the Wall Thermal Condition Effect in a Lean-Premixed Downscaled Can Combustor Using Large-Eddy Simulation GT Daniel Mira Martinez, BSC-CNS, Barcelona, Cataluna, Spain, Enric I. Mahiques, Simon Goevert, Jim B.W. Kok, University of Twente, Enschede, Netherlands, Mariano Vazquez, Guillaume Houzeaux, BSC-CNS, Barcelona, Spain, Lukas Panek, SIEMENS, Berlin, Germany Gas Turbine Combustor Rig Development and Initial Observations at Cold and Reacting Flow Conditions GT David Gomez Ramirez, Sandeep Kedukodi, Siddhartha Gadiraju, Srinath Ekkad, Hee-Koo Moon, Yong Kim, Ram Srinivasan Operation of Reheat Combustors With Secondary Air Flow (SAF) Control Valves GT Xianfeng Gao, Daniel Burri, Christian Balmer, Adrien Studerus, Ansaldo Energia Switzerland, Baden, Switzerland FINAL PROGRAM 125

126 THURSDAY, JUNE 16 2:30-5:30 PM INDUSTRIAL & COGENERATION MANUFACTURING MATERIALS & METALLURGY MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES Design and Evaluation Considerations of Waste Heat Recovery Technologies Advances in High Temperature Materials Microturbine Development, Performance, and Novel Concepts Tutorial Session Room E5 ThC-20-6 Panel Session Room 402 ThC-21-5 Paper Session Room 308C ThC-23-3 Session Chair: Clement Joly, SoftInWay, Session Co-Organizer: Abdul Nassar, SoftIn- Way Session Co-Chair: Valentine Moroz, SoftIn- Way Session Chair: Yasuoki Tomita, Mitsubishi Hitachi Power Systems, Ltd Session Co-Chair: Dheepa Srinivasan, GE Power Session Chair: Vince McDonell, UC Irvine 2:30 Design and Evaluation Considerations of Waste Heat Recovery Technologies GT Leonid Moroz, Softinway Inc., Burlington, MA, United States, Abdul Nassar, SoftInWay, Bangalore, India, Clement Joly, SoftInWay, Burlington, MA, United States Advanced Alloy Development Approaches - Case Studies and Industry Perspective GT Raghavendra Adharapurapu, GE india Technology Centre Pvt. Ltd., Bangalore, India Development of an Inside-Out Ceramic Turbine GT Céderick Landry, Patrick K. Dubois, Nicolas Courtois, François Charron, Mathieu Picard, Jean-Sébastien Plante, Université de Sherbrooke, Sherbrooke, QC, Canada 5:00 4:30 4:00 3:30 3:00 T U T O R I A L Superalloys and Effects of Alloynig Elements on Their Characteristics GT Chang-Yong Jo, Korea Institute of Materials Science, Gyeongnam, Korea (Republic) High Temperature Gas Turbine Parts Operational Experience and Service GT Hideaki Kaneko, Mitsubishi Heavy Industries, Ltd., Hyogo, Japan The Reliability Test of Hot Gas Path Component of Industrial Gas Turbine in KEPCO Research Institute GT Doo Soo Kim, KEPCO Research Institute, Daejeon, Korea (Republic) A Simple Recuperated Ceramic Microturbine: Design Concept, Cycle Analysis, and Recuperator Component Prototype Tests GT Michael Vick, U.S. Naval Research Lab, Washington, DC, United States, Steven Tuttle, Katherine Hinnant, U.S. Naval Research Laboratory, Code 6185, Washington, DC, United States, Matthew Kelly, Trent Young, U.S. Naval Research Laboratory, Code 5712, Washington, DC, United States Development and Testing of a 333 Kilowatt Industrial Gas Turbine GT Jeffrey Armstrong, Flexenergy Energy Systems Inc., Portsmouth, NH, United States, Chris Bolin, Flexenergy Inc, Portsmouth, NH, United States, Mohammed Ebrahim, FlexEnergy Energy Systems Inc., Portsmouth, NH, United States, Michael Carney, FlexEnergy, Energy Systems Inc., Portsmouth, NH, United States Design of a 400 kw Gas Turbine Prototype GT Ahti Jaatinen-Värri, Lappeenranta University of Technology, Lappeenranta, Finland, Matti Malkamäki, Aurelia Turbines Oy, Lappeenranta, Finland, Janne Nerg, Lappeenranta univ. of tech., Lappeenranta, Finland, Antti Uusitalo, Lappeenranta University of Technology, Lappeenranta, Finland, Behnam Ghalamchi, Lappeenranta University of Technology Department of Mechanical Engineering, Lappeenranta, OO, Finland, Nikita Uzhegov, Alexander I. Smirnov, Lappeenranta univ. of tech., Lappeenranta, Finland, Eerik Sikanen, Aki Grönman, Jari Backman, Lappeenranta University of Technology, Lappeenranta, OO, Finland 126 ASME 2016 TURBO EXPO

127 THURSDAY, JUNE 16 2:30-5:30 PM OIL & GAS APPLICATIONS ORGANIC RANKINE CYCLE POWER SYSTEMS STEAM TURBINES Compressor Stations ORC Power Plants: Working Fluids, Cycles and Plant Design Wet Steam Research Paper Session Room 317A ThC-24-2 Paper Session Room 317B ThC Panel Session Room E2 ThC Session Chair: Rainer Kurz, Solar Turbines Incorporated Session Co-Chair: Tim Allison, Southwest Research Institute Session Chair: Emiliano Casati, Delft University of Technology Session Chair: Joerg Starzmann, Cambridge University Engineering Department Session Co-Chair: Brian Haller, GE Power 2:30 The Impact of Reciprocating Compressor Pulsations on the Surge Margin of Centrifugal Compressors GT Klaus Brun, Sarah Simons, Southwest Research Institute, San Antonio, TX, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States Investigating The Effect Of Changing The Working Fluid On The Three-Dimensional Flow Field Within Organic Rankine Cycle (ORC) Turbines GT Martin White, Abdulnaser Sayma, City University London, London, United Kingdom Status of the International Wet Steam Modelling Project GT Joerg Starzmann, Cambridge University Engineering Department, Cambridge, United Kingdom 3:00 Acoustically Induced Vibration Mitigations in Compressor Piping Systems GT Tim Allison, Jeffrey Bennett, Southwest Research Institute, San Antonio, TX, United States Performance Optimization and Economic Analysis of Geothermal Power Generation by Subcritical and Supercritical Organic Rankine Cycles GT Changwei Liu, Xi an Jiaotong University, Xi an, Shaanxi, China, Tieyu Gao, Xian Jiaotong University, Xian, Shaanxi, China, Jiangnan Zhu, Jiamin Xu, Xi An Jiaotong University, Xi an, Shaanxi, China 3:30 4:00 4:30 Gas Compression Optimization for Changing Pipeline Landscape GT Donghui Zhang, Solar Turbines Inc., San Diego, CA, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Matt Lubomirsky, Avneet Singh, David Garcia, Alex Troya, Solar Turbines Inc., San Diego, CA, United States Modular Tool for Design and Off-Design Analysis of Compression Trains for Oil and Gas Applications GT Leopoldo Marini, Carlo Carcasci, University of Florence, Florence, Italy, Mirko Micio, ERGON research srl, Florence, Italy, Riccardo Brogelli, Pier Luigi Di Pillo, GE Oil & Gas - Nuovo Pignone, Florence, Italy Power Dip Impact on Compressor System Stability GT Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway, Erling Lunde, Morten Loes, Statoil RDI, Trondheim, Norway Effect of ambient conditions on ORC based power system using fin tube condensers over the year and location of installation Technical Presentation Only. GT Muhammad Usman, Young-Min Yang, Korea University of Science & Technology (UST) & Korea Institute of Energy Research (KIER), Daejeon, Korea (Republic), Dong-Hyun Lee, Korea Institute of Energy Research, Daejeon, Korea (Republic), Byung- Sik Park, Korea Institute of Energy Research & Korea University of Science & Technology (UST), Daejeon, Korea (Republic) Optimization of Cycle and Expander Design of an Organic Rankine Cycle Unit Using Multi-Component Working Fluids GT Andrea Meroni, Jesper Graa Andreasen, Leonardo Pierobon, Fredrik Haglind Needs in wet steam research - the view of an experimentalist GT Markus Schatz, University of Stuttgart, Stuttgart, Germany EDF activities, targets and concerns in wet steam research GT Jean-Marc Dorey, R&D EDF, Chatou, France 5:00 Analysis of Historical Dry Gas Seal Failure Data GT Meera Day, Tim Allison, Southwest Research Institute, San Antonio, TX, United States The University of Queensland Refrigerant and Supercritical CO2 Test Loop GT Braden Twomey, Hugh Russell, Andras Nagy, Andrew Rowlands, Jason Czapla, Rajinesh Singh, Carlos André De Miranda Ventura, Ingo Jahn FINAL PROGRAM 127

128 THURSDAY, JUNE 16 2:30-5:30 PM STRUCTURES & DYNAMICS: ROTORDYNAMICS STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS Bearings - Modeling & Validation 1 Turbomachine Aeroelasticity and Computational Methods 1 Secondary Flows and Endwall Profiling Paper Session Room 300 ThC Paper Session Room 307C ThC-34-1 Paper Session Room E1 ThC-38-2 Session Chair: Martin Conlon, National Research Council Canada Session Co-Chair: Keun Ryu, Hanyang University, Ansan Session Chair: Paul Petrie Repar, KTH Sweden Session Co-Chair: Mizuho Aotsuka, IHI Corporation Session Chair: Inga Mahle, MTU Aero Engines AG Session Co-Chair: Reinaldo Araujo Gomes, University of the Federal Armed Forces Munich 2:30 A Water Lubricated Hybrid Thrust Bearing: Measurements and Predictions of Static Load Performance GT Luis San Andres, Dara Childs, Texas A & M Univ, College Station, TX, United States, Stephen Phillips, Texas A&M Turbomachinery Lab, Bryan, TX, United States Numerical Study on Aeroelastic Instability for a Low Speed Fan GT Kuen-Bae Lee, Imperial College London, London, United Kingdom, Mark Wilson, Rolls-Royce, Derby, United Kingdom, Mehdi Vahdati, Imperial College London, London, United Kingdom Comparison of 2D and 3D Airfoils in Combination With Non Axisymmetric End Wall Contouring: Part 1 Experimental Investigations GT Tobias W. Zimmermann, Oliver Curkovic, Manfred Wirsum, Andrew Fowler, Kush Patel 3:00 3:30 Comparative Lift-Off Performance in Flexure Pivot Pad and Hybrid (Hydrostatic and Hydrodynamic) Bearings With Water as the Test Fluid GT Dara Childs, Texas A & M Univ, College Station, TX, United States, David Mertz, Siemens, Inc. Dresser-Rand Business, Houston, TX, United States Measurements Versus Predictions for a Hybrid (Hydrostatic Plus Hydrodynamic) Thrust Bearing for a Range of Orifice Diameters GT Dara Childs, Texas A & M Univ, College Station, TX, United States, Paul Esser, Texas A&M University, Philadelphia, PA, United States A Simple Model for Identifying the 'Flutter Bite' of Fan Blades GT Fanzhou Zhao, Imperial College London, London, United Kingdom, Nigel H S Smith, Rolls-Royce Plc, Derby, United Kingdom, Mehdi Vahdati, Imperial College London, London, United Kingdom Comparison of Two Numerical Algorithms for Computing the Effects of Mistuning of Fan Flutter GT Loic Salles, Imperial college, London, United Kingdom, Mehdi Vahdati, Imperial College London, London, United Kingdom Comparison of 2D and 3D Airfoils in Combination With Non Axisymmetric End Wall Contouring: Part 2 Numerical Investigations GT Tobias W. Zimmermann, Oliver Curkovic, Manfred Wirsum, Andrew Fowler, Kush Patel Numerical Study of Purge and Secondary flows in a Low Pressure Turbine GT Jiahuan Cui, Paul G. Tucker, University of Cambridge, Cambridge, United Kingdom 4:00 On the Predicted Effect of Angular Misalignment on the Performance of Oil Lubricated Thrust Collars in Integrally Geared Compressors GT Travis Cable, Texas A&M University, College Station, TX, United States, Luis San Andres, Texas A & M Univ, College Station, TX, United States, Karl Wygant, Samsung Techwin, Pearland, TX, United States Investigation of Inlet Distortion on the Flutter Stability of a Highly Loaded Transonic Fan Rotor GT Senad Iseni, Chair of Thermal Turbomachinery Ruhr-Universität Bochum, Bochum, Germany, Derek Micallef, Ruhr-Universität Bochum, Bochum, Germany, Ronald Mailach, Technische Universität Dresden, Dresden, Germany End-Wall Secondary Flow Control Using Engineered Residual Surface Structure GT Xin Miao, Qiang Zhang, Chris Atkin, Zhengzhong Sun, City University London, London, United Kingdom 4:30 5:00 Transient Lift-Off Test Results for an Experimental Hybrid Bearing in Air, Simulating a Liquid Hydrogen Turbopump Start Transient GT Dara Childs, David Klooster, Henry Borchard, Dustin Pavelek, Stephen Phillips Rotordynamic Performance Predictions of Flexure Pivot Tilting Pad Bearings And Comparison to Published Test Data GT Tae Ho Kim, Kyung Eun Jang, Kookmin University, Seoul, Korea (Republic), Tae Gyu Choi, Doosan Heavy Industries & Construction, Changwon-si,, Korea (Republic) Statistical Sensitivity Study of Frequency Mistuning on the Prediction of the Flutter Boundary in a Transonic Fan GT Atsushi Tateishi, The University of Tokyo, Tokyo, Japan, Toshinori Watanabe, Takehiro Himeno, University of Tokyo, Tokyo, Japan, Mizuho Aotsuka, Takeshi Murooka, IHI Corporation, Tokyo, Japan Numerical Study on Aero-Thermal Performance of HP Turbine Endwalls Under Influence of Hot Streak and High Mainstream Turbulence GT Zhiduo Wang, Wenhao Zhang, Zhaofang Liu, Chen Zhang, Xi an Jiaotong University, Xi an, Shaanxi, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China On Axisymmetric Endwall Profile Optimization of a High-Pressure Transonic Turbine Using Approximation Model GT Inkyom Kim, Jinuk Kim,Young Seok Kang, Jinsoo Cho 128 ASME 2016 TURBO EXPO

129 THURSDAY, JUNE 16 2:30-5:30 PM TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY LES and DNS Turbine Applications Stall and Surge I Unsteady Flows in Centrifugal Compressors Paper Session Room 327 ThC-39-9 Paper Session Room 318C ThC-44-7 Paper Session Room 403 ThC-44-9 Session Chair: Rob Watson, University of Cambridge Session Co-Chair: Koen HILLEWAERT, Cenaero Session Chair: Jen-Ping Chen, The Ohio State Univ Session Co-Chair: Sameer Kulkarni, NASA Glenn Research Center Session Chair: Michael Barton, Honeywell International Session Co-Chair: Nateri K., Madavan, NASA Ames Research Center 2:30 Assessment of RANS Against LES for the Aero-Thermal Behavior of High Pressure Turbine Stages Under Realistic Inlet Conditions GT Stefano Vagnoli, Charlie Koupper, Guillaume Bonneau, Tom Verstraete Structure of Diffuser Stall and Unsteady Vortices in a Centrifugal Compressor With Vaned Diffuser GT Nobumichi Fujisawa, Sota Ikezu, Yutaka Ohta, Waseda University, Tokyo, Japan Blade Incipient Crack Determination for Centrifugal Compressor Based on Pressure Pulsation Signal Feature Extraction GT Hongkun Li, Changbo He, Daren Jiang, Xuejun Wang 3:00 DNS of Low Pressure Turbine Cascade Flows with Elevated Inflow Turbulence Using a Discontinuous Galerkin Spectral Element Method GT Anirban Garai, Laslo T., Diosady, Scott M., Murman, Nateri K., Madavan Large-Scale DES Analysis of Stall Inception Process in a Multi-Stage Axial Flow Compressor GT Kazutoyo Yamada, Masato Furukawa, Yuki Tamura, Seishiro Saito, Kyushu University, Fukuoka, OTHER, Japan, Akinori Matsuoka, Kawasaki Heavy Industries,Ltd., Akashi city, Japan, Kentaro Nakayama, Kawasaki Heavy Industries, Ltd., Akashi, Japan Unsteady and Multi-Blade Passage Numerical Simulation on an Unshrouded Centrifugal Impeller GT Tongtong Zhang, Tong Wang, Hui WANG, Chuangang Gu, Shanghai Jiaotong University, Shanghai, China 3:30 LES and CDNS Investigation of T106C Low Pressure Turbine GT Site Hu, Chao Zhou, Zhenhua Xia, Shiyi Chen, Peking University, Beijing, China Numerical Study on the Effect of a Volute on Surge Phenomena in a Centrifugal Compressor GT soohwan jeon, Dongha Hwang, Jaehyeon Park, Changhyun Kim, Je Hyun Baek, Hong-won Kim Numerical Evaluation of the Unsteady Flow in a Centrifugal Compressor With Vaned Diffuser via URANS Approach GT Ali Zamiri, Byung Ju Lee, Jin Taek Chung, Korea university, Seoul, Korea (Republic) 4:00 DNS-Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade GT Christoph Müller, Dr. Ralf-D. Baier, Joerg Seume, Florian Herbst Numerical Investigation of Flow Instability in Centrifugal Pump Based on Energy Gradient Method GT lulu zheng, Hua-Shu Dou, xiaoping chen, zuchao zhu, baoling cui, Zhejiang Sci-Tech University, Hangzhou, China Flow Visualization of Unsteady and Transient Phenomena in a Mixed-Flow Multiphase Pump GT Alberto Serena, Norwegian University of Science and Technology, Trondheim, OO, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway 4:30 Assessment of Grid Resolution Requirements for Accurate Simulation of Disparate Scales of Turbulent Flow in Low-Pressure Turbines GT Richard Pichler, University of Melbournce, Melbourne, Victoria, Australia, Richard D. Sandberg, University of Melbourne, Melbourne, Victoria, Australia, Vittorio Michelassi, General Electric Oil&Gas, Florence, Italy Stall Warning Approach With Application to Stall Precursor-Suppressed Casing Treatment GT Li Fanyu, Jun Li, Air Force Engineering University, Xi an, China, Dong Xu, Sun Dakun, Sun Xiaofeng, Beijing University of Aeronautics and Astronautics, Beijing, China Corner Separation Dynamics in a Linear Compressor Cascade GT Gherardo Zambonini, Ecole Centrale Lyon, Ecully, France, Xavier Ottavy, CNRS - LMFA, Ecully, France, Jochen Kriegseis, Institute of Fluid Mechanics, Karlsruhe Institute of Technology, Karlsruhe, Germany 5:00 Highly Resolved LES of a Linear HPT Vane Cascade Using Structured and Unstructured Codes GT Richard Pichler, James Kopriva, Gregory Laskowski, Vittorio Michelassi, Richard D. Sandberg, LES Validation for a Rotating Cylindrical Cavity With Radial Inflow GT Michel Onori, Dario Amirante, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom FINAL PROGRAM 129

130 THURSDAY, JUNE 16 2:30-5:30 PM TURBOMACHINERY: MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION & UNCERTAINTY WIND ENERGY Multi-Objective and Multi-Criteria Design Applications (Axial and Radial Turbomachinery) Paper Session Room 318A ThC-45-8 Session Chair: Swati Saxena, GE Global Research Session Co-Chair: Byung Lee, GE Aviation University Research Activities Panel Session Room E6 ThC Session Chair: Lorenzo Ferrari, National Research Council of Italy 2:30 3:00 Multi-Objective Aerodynamic Optimisation of a Radial-Inflow Turbine GT Mostafa Odabaee, The University of Queensland, St Lucia, Australia, Emilie Sauret, Queensland University of Technology, Brisbane, QLD, Australia, Kamel Hooman, The University of Queensland, Brisbane, QLD, Australia Aerothermal Optimization of Squealer Geometry in Axial Flow Turbines Using Genetic Algorithm GT Emre Alpman, Marmara University, Istanbul, Turkey, Levent Kavurmacioglu, HIDIR MARAL, Cem B Senel, Kaan Deveci, Istanbul Technical University, Istanbul, Turkey Advanced aerodynamics of Darrieus wind turbine GT Lorenzo Ferrari, University of Florence, Florence, Italy Start Up of Vertical Axis Wind Turbines: Theory and Wind Tunnel Experiments GT Grant Ingram, Durham University, Durham, United Kingdom 3:30 Optimization of a Centrifugal Pump Impeller by Controlling Blade Profile Pameters GT M. H. Siddique, k.r. Mrinal, Abdus Samad, iit madras, chennai, India ETH Zurich's aero-structural measurements on multi-megawatt wind turbines GT Ndaona Chokani, ETH Zurich, Zurich, Switzerland 4:00 Multicriteria Optimization of Axial Low Pressure Compressor of Gas Turbine Power Plant GT Grigorii Popov, Evgenii Goriachkin, Daria Kolmakova, Yulia Novikova, Samara State Aerospace University, Samara, Russia Design, manufacturing and operation of the first SMART wind turbine in Germany (a.k.a. BeRT) GT George Pechlivanoglou, HFI TU Berlin, Berlin, Germany 4:30 Design and Optimization of Tandem Cascade Based on Parallel Differential Evolution Algorithm GT Hao Cheng, Bo Liu, Xiaodong Yang, Jun Li Wind turbine performance evaluation GT Yu Ding, Texas A&M University, College Station, TX, United States 5:00 Distributed Multidisciplinary Optimization of a Turbine Blade Regarding Performance, Reliability and Castability GT Clemens Buske, Alexander Krumme, Thomas Schmidt, Christian Dresbach, Sascha Zur, Ruediger Tiefers Small Wind Turbine Testing in a Wind Tunnel Under Low Reynolds Number Conditions GT Kenneth Van Treuren, Baylor University, Waco, TX, United States 130 ASME 2016 TURBO EXPO

131 FRIDAY, JUNE 17 8:00-10:00 AM CERAMICS COAL, BIOMASS & ALTERNATIVE FUELS COMBUSTION, FUELS & EMISSIONS Ceramic Matrix Composites: Modeling and Life Prediction Biofuels, Biomass and Coal Challenges and Applications Pollutant Emissions Formation & Control: Combustor Performance Paper Session Room E2 FA-2-2 Paper Session Room 318B FA-3-4 Paper Session Room E3 FA-4-9 Session Chair: Jun Shi, Rolls-Royce Corporation Session Co-Chair: Sai Sarva, GE Global Research Session Chair: Pierre gauthier, Siemens Canada Limited Session Co-Chair: Leiyong Jiang, National Research Council Session Chair: P Gokulakrishnan, Combustion Science and Engineering, Inc, Session Co-Chair: Gilles Bourque, Siemens Canada Limited 8:00 8:30 9:00 9:30 Mesoscopic Modeling of 3D Four-Directional Braided Composites GT Rongqiao Wang, Long Zhang, Dianyin Hu, Xiuli Shen, Beihang University, Beijing, China, Jun Song, McGill University, Montreal, QC, Canada Optimizing Ceramic Matrix Composite Interlaminar Fracture Toughness (Mode I) Wedge Test GT Frank Abdi, Alpha Star Corp, Long Beach, CA, United States, Saber DorMohammadi, Cody Godines, Jalees Ahmad, AlphaSTAR Corporation, Long Beach, CA, United States, Gregory Morscher, The University of Akron, Akron, OH, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States, Stephen Gonczy, Gateway Material Technology, MT Prospect, IL, United States, Rabih Mansour, The University of Akron, Univ Of Akron, OH, United States Foreign Object Damage and Fatigue After Impact Simulations on Flat and Curved Hi Nicalon and Hi Nicalon Type S (MI SiC) Specimens at Room and 1200 C Using Building Block Approach GT Frank Abdi, Alpha Star Corp, Long Beach, CA, United States, Cody Godines, Marc Villa Montero, AlphaSTAR Corporation, Long Beach, CA, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States, Gregory Morscher, The University of Akron, Akron, OH, United States, Michael Presby, Zipeng Han, University of Akron, Akron, OH, United States Investigation on Jet Breakup of High-Viscous Fuels for Entrained Flow Gasification GT Thomas Müller, Karlsruhe Institute of Technology, Engler-Bunte-Institute, Karlsruhe, Germany, Alexander Sänger, Tobias Jakobs, Karlsruhe Institute of Technology, Institute for Technical Chemistry, Eggenstein-Leopoldshafen, Germany, Peter Habisreuther, Karlsruhe Institute of Technology, Engler-Bunte-Institute, Karlsruhe, Germany, Thomas Kolb, Karlsruhe Institute of Technology, Institute for Technical Chemistry, Eggenstein-Leopoldshafen, Germany, Nikolaos Zarzalis, Karlsruhe Inst. of Tech., Division of Comb. Tech., Karlsruhe, Germany A Numerical Study on the Reactivity of Biogas/Reformed-Gas/Air and Methane/ Reformed-Gas/Air Mixtures at Gas Turbine Relevant Conditions GT Pablo Diaz Gomez Maqueo, Philippe Versailles, McGill University, Montreal, QC, Canada, Gilles Bourque, Siemens Canada Limited, Dorval, QC, Canada, Jeffrey Bergthorson, McGill University, Montreal, Canada, QC, Canada Experimental Study of Mayenite-Based Catalysts Effectiveness in Reducing Pollution From Biomass Gasification in Fluidized Bed Reactors GT Elisa Savuto, Dip. Sc. e Tecn. per l'agric. For. Nat. e En., Universita della Tuscia, Viterbo, Italy, Domenico Borello, Università di Roma Sapienza, Rome, Italy, Andrea Di Carlo, Dipartimento di Ingegneria industriale e dell informazione e di economia, Università dell Aquila, L Aquila, Italy, Stefano Natali, DICMA Sapienzaa Università di Roma, Roma, RM, Italy, Antonio Pantaleo, Università Di Bari, Bari, Italy, Franco Rispoli, Sapienza University of Rome, Rome, Italy Numerical and Experimental Studies of Burner Geometry Effects on Methane/Air Mixing Uniformity and Combustion Characteristics of a DLN Burner GT Yan Zhao, Yan Liu, Weiwei Shao, Xiaodi Tang, Zhedian Zhang, Yunhan Xiao, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China Emissions Characteristics of Combustion of Lean Secondary Premixed Gas Jets Injected Into Burned Gas From Primary Stage by Lean Premixed Combustion Supported by Reverse Jet Flame Holding GT Shigeru Hayashi, Hosei university, Tokyo, Tokyo, Japan, Takumi Saitoh, Hosei University, Koganei, Tokyo, Japan, Takafumi Nakasu, Takumi Hiroi, Hosei University, kogani, Tokyo, Japan, Hideshi Yamada, The Japan Aerospace Agency, Aeronautical Technology Center, Chofu, Tokyo, Japan Predictive Emissions Monitoring System for Small Siemens Dry Low Emissions Combustors: Validation and Application GT Rick Hackney, Siemens Industrial Turbomachinery Ltd, Lincoln, Lincolnshire, United Kingdom, Suresh Sadasivuni, Siemens AG, Montreal, QC, Canada, Jim Rogerson, Ghenadie Bulat, Siemens Industrial Turbomachinery Ltd, Lincoln, Lincolnshire, United Kingdom Investigation of the Combustion Performance in a Three-Nozzle RQL Combustor GT Bing Ge, Shanghai Jiaotong University, Shanghai, China, Yongbin Ji, Shanghai Jiaotong Universtiy, Shanghai, Shanghai, China, Shusheng Zang, SHANGHAI JIAO TONG UNIVERSITY,CHINA, SHANGHAI, China, yongwen Yuan, Shanghai Jiaotong Univerisity, Shanghai, China, Jianhua Xin, Shanghai Jiaotong University, Shanghai, China FINAL PROGRAM 131

132 FRIDAY, JUNE 17 8:00-10:00 AM COMBUSTION, FUELS & EMISSIONS CONTROLS, DIAGNOSTICS & INSTRUMENTATION CYCLE INNOVATIONS Combustor Diagnostics and Micro Devices Monitoring and Estimation Methods Turbomachinery Design Aspects in Cycle Innovation Paper Session Room 317C FA-4-29 Paper Session Room 308B FA-5-10 Paper Session Room 402 FA-6-5 Session Chair: Scott Drennan, Convergent Science, Inc. Session Co-Chair: Felix Guethe, General Electric Power Session Organizer: Lubomir Ribarov, UTC AEROSPACE SYSTEMS Session Chair: Hans Wettstein, HEW 8:00 The Design and Model Simulation of a Micro Gas Turbine Combustor Supplied With Methane/Syngas Fuels GT Chi-Rong Liu, Hsin-Yi Shih, Chang Gung University, Taoyuan, Taiwan Readings on Specific Gas Turbine Flame Behaviours Using an Industrial Combustion Monitoring System GT Fabrice Giuliani, Combustion Bay One e.u., Graz, Österreich, Austria, Hans Reiss, Meggitt Sensing Systems, Fribourg, Switzerland, Markus Stuetz, Vanessa Moosbrugger, Combustion Bay One e.u., Graz, Austria, Alexander Silbergasser, FH Joanneum, Graz, Austria Effects of Rotor-Speed-Ratio and Crosswind Inlet Distortion on Off-Design Performance of Contra-Rotating Propelling Unit GT Stavros Vouros, Aristotle University of Thessaloniki (AUTH), Thessaloniki, Greece, Theofilos Efstathiadis, Aristotle University, Thessaloniki, Greece, Alexandros Chasoglou, Cranfield University, Cranfield Bedford, United Kingdom, Anestis I. Kalfas, Aristotle University of Thessaloniki, Thessaloniki, Greece 8:30 Detailed Examination of Two-Staged Micro Gas Turbine Combustor GT Andreas Schwärzle, Thomas O. Monz, German Aerospace Center (DLR e.v.), Stuttgart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technology, Stuttgart, Germany Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis GT Ulrich Hartmann, Institute of Turbomachinery and Fluid Dynamics, Hannover, Niedersachsen, Germany, Christoph Hennecke, Friedrich Dinkelacker, Institute of Technical Combustion - Leibniz Universität Hannover, Hannover, Niedersachsen, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany Direct Coupling of a Two-Dimensional Fan Model in a Turbofan Engine Performance Simulation GT Ioannis Templalexis, Hellenic Air Force Academy, Greece, Alexios Alexiou, National Technical University of Athens, Athens, Greece, Ioannis Roumeliotis, Hellenic Naval Academy, Piraeus, 18539, Greece, Vassilios Pachidis, Cranfield University, Bedford, United Kingdom, Nikolaos Aretakis, National Technical University of Athens, Attiki, Greece 9:00 Investigation of Thermal and Stress States of the Annular Combustion Chamber Flame Tube Walls GT Vlad Anisimov, Ivan A. Zubrilin, SSAU, Samara, Russia, Mikhail Yu Orlov, Samara State Aerospace University, Samara, Russia Virtual Sensing for Rotordynamics GT Simona Moschini, KULeuven, Heverlee, Belgium, Konstantinos Gryllias, Wim Desmet, Bert Pluymers, KU Leuven, Heverlee, Belgium Helium Turboexpander for Cryogenic Refrigeration and Liquefaction Cycles: Transient Analysis of Rotor-Stator Interaction GT ASHISH ALEX SAM, Parthasarathi Ghosh, Indian Institute of Technology Kharagpur, West Midnapore, West Bengal, India 9:30 Systems Design and Experimental Evaluation of a High-Altitude Relight Test Facility GT Brendan Paxton, Samir Tambe, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States Defect Detection in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases GT Henrik von der Haar, Christoph Hennecke, Institute of Technical Combustion - Leibniz Universität Hannover, Hannover, Germany, Ulrich Hartmann, Institute of Turbomachinery and Fluid Dynamics, Hannover, Niedersachsen, Germany, Friedrich Dinkelacker, Institute of Technical Combustion - Leibniz Universität Hannover, Hannover, Niedersachsen, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany 132 ASME 2016 TURBO EXPO

133 FRIDAY, JUNE 17 8:00-10:00 AM FANS & BLOWERS HEAT TRANSFER: NUMERICAL INTERNAL COOLING HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) Numerical Methods and Studies - II Numerical Internal Cooling: Jet Impingement Miscellaneous Topics in Internal Air Systems Modeling Paper Session Room 318A FA-9-4 Paper Session Room 301 FA-11-4 Paper Session Room 307A FA-15-7 Session Chair: Giovanni Delibra, Sapienza University of Rome Session Co-Chair: Tommaso Bonanni, Sapienza, University of Rome Session Organizer: Ali Ameri, The Ohio State University Session Co-Organizer: Okey Kwon, Pusan University Session Organizer: Guillermo Paniagua, Purdue University Session Co-Organizer: Qiang Zhang, City University London 8:00 Numerical Analysis of Turbulent Jets in Quiescent Medium GT Ritik Singh, Marton Gyuro, Greenheck Fan Corporation, Schofield, WI, United States Effect of Rotation on a Gas Turbine Blade Internal Cooling System: Numerical Investigation GT Emanuele Burberi, University of Florence, Florence, Italy, Daniele Massini, Unversity of Florence, Firenze, Italy, Lorenzo Cocchi, Lorenzo Mazzei, Antonio Andreini, Bruno Facchini, University of Florence, Florence, Italy Subsonic Flow Over Open Cavities: Part 1 Analytical Models and Numerical Investigations GT Weidong SHAO, Xi an Jiaotong University, Xi an, Shaanxi, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China 8:30 Numerical Study on the Passive Control of the Aeroelastic Response in Large Axial Fans GT Alessio Castorrini, Sapienza University of Rome, Rome, Italy, Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States, Franco Rispoli, Sapienza University of Rome, Rome, Italy Influence of Topology on Heat Transfer in a Double Wall Cooling Channel: Potential of Series-Linked Jets GT Li Yang, Univ of Pittsburgh, Pittsburgh, PA, United States, Weihong Li, Tsinghua University, Department of Thermal Engineering, Beijing, China, Jing Ren, Tsinghua University, Beijing, China, Minking Chyu, Univ Of Pittsburgh, Pittsburgh, PA, United States, Hongde Jiang, Tsinghua University, Beijing, China Subsonic Flow Over Open Cavities: Part 2 Passive Control Methods GT Weidong SHAO, Xi an Jiaotong University, Xi an, Shaanxi, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China 9:00 A Shape Memory Alloy-Based Morphing Axial Fan Blade: Functional Characterization and Fluid Dynamic Performance GT Alessio Suman, Università di Ferrara, Ferrara, Italy, Annalisa Fortini, Nicola Aldi, Mattia Merlin, Michele Pinelli, University of Ferrara, Ferrara, Italy LES of a Round Impinging Jet: Investigation of the Link Between Nusselt Secondary Peak and Near-Wall Vortical Structures GT Pierre Aillaud, Florent Duchaine, Laurent Gicquel, CERFACS, Toulouse, France Aero-Thermo-Mechanical Modelling and Validation of Transient Effects in a High Pressure Turbine Internal Air System GT Vlad Ganine, Dario Amirante, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom 9:30 A Comparison of Actuator Disc Models for Axial Flow Fans in Large Air-Cooled Heat Exchangers GT Michael Wilkinson, Francois Louw, Sybrand J. van der Spuy, Theodor W. von Backström, Stellenbosch University, Stellenbosch, Western Cape, South Africa Effect of Bleed Position and Bleed Angle on Impingement Cooling of a Spherical-Dimpled Surface GT Zhao Liu, Xi an Jiaotong University, Xi An, China, Xing Yang, Xi An Jiaotong University, Shaanxi, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China, Terrence Simon, University Of Minnesota, Minneapolis, MN, United States CFD Simulations of a Meshing Gear Pair GT Emanuele Burberi, Tommaso Fondelli, Antonio Andreini, Bruno Facchini, University of Florence, Florence, Italy, Lorenzo Cipolla, GE Avio s.r.l., Rivalta di Torino (TO), Italy FINAL PROGRAM 133

134 FRIDAY, JUNE 17 8:00-10:00 AM HEAT TRANSFER: EXPERIMENTAL INTERNAL COOLING HEAT TRANSFER: EXPERIMENTAL FILM COOLING MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES Experimental Internal Cooling: Special Topics Endwall and Shroud Cooling Microturbine and Small Compressor Performance Paper Session Room 307B FA-16-5 Paper Session Room 308A FA-19-5 Paper Session Room 308C FA-23-4 Session Organizer: Lamyaa El-Gabry, The American University of Cairo Session Co-Organizer: Harika Kahveci, Middle East Session Chair: Seth Lawson, US Department of Energy Session Co-Organizer: David Bogard, Univ Of Texas At Austin Session Chair: Michael Vick, U.S. Naval Research Lab Session Co-Chair: Aki Grönman, Ahti Jaatinen-Varri, Lappeenranta University of Technology 8:00 Heat Transfer and Pressure Loss Measurements in Additively Manufactured Wavy Microchannels GT Kathryn Kirsch, Penn State University, State College, PA, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States Turbine Vane Endwall Film Cooling With Slashface Leakage and Discrete Hole Configuration GT Nafiz H. K. Chowdhury, Chao-Cheng Shiau, Texas A&M University, College Station, TX, United States, JC Han, Texas A & M University, College Station, TX, United States, Luzeng Zhang, Hee- Koo Moon, Solar Turbines Inc., San Diego, CA, United States Multi-Disciplinary Optimization of a Mixed-Flow Compressor Impeller GT Olaf H.F. Diener, Sybrand J. van der Spuy, Theodor W. von Backström, Stellenbosch University, Stellenbosch, Western Cape, South Africa, Thomas Hildebrandt, NUMECA Ingenieurbüro, Altdorf b. Nürnberg, Germany 8:30 Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels GT Curtis Stimpson, Jacob C Snyder, Pennsylvania State University, State College, PA, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States, Dominic Mongillo, Pratt & Whitney, East Hartford, CT, United States Turbine Blade Platform Film Cooling With Simulated Swirl Purge Flow and Slashface Leakage Conditions GT Andrew F Chen, Chao-Cheng Shiau, Texas A&M University, College Station, TX, United States, JC Han, Texas A & M University, College Station, TX, United States Multi-Disciplinary Optimization of a Centrifugal Compressor for Micro-Turbine Applications GT andrea perrone, University of Genoa, genova, Italy, Francesca Satta, University of Genova, Genova, Italy, gianluca ricci, Luca Ratto, University of Genoa, genova, Italy, Pietro Zunino, Università di Genova, Genova, Italy 9:00 Reduction in Flow Parameter Resulting From Volcanic Ash Deposition in Engine Representative Cooling Passages GT Sebastien Wylie, Alexander Bucknell, Peter Forsyth, University of Oxford, Oxford, United Kingdom, David Gillespie, Osney Mead Industrial Estate/University of Oxford, Oxford, United Kingdom, Matthew McGilvray, University of Oxford, Oxford, Oxfordshire, United Kingdom Contoured Endwall Flow and Heat Transfer Experiments With Combustor Coolant and Gap Leakage Flows for a Turbine Nozzle Guide Vane GT Reema Saxena, Mahmood H. Alqefl, University of Minnesota, Minneapolis, MN, United States, Zhao Liu, Xi an Jiaotong University, Xi An, China, Hee- Koo Moon, Luzeng Zhang, Solar Turbines Inc., San Diego, CA, United States, Terrence Simon, University Of Minnesota, Minneapolis, MN, United States Altitude Effects on the Performance of Small Radial Turbomachinery: Part I Compressor Impellers GT Dries Verstraete, The University of Sydney, Sydney, NSW, Australia, Kjersti Lunnan, The University of Sydney, The University of Sydney, NSW, Australia 9:30 Combustor-Turbine Aerothermal Interaction in an Axial Turbine: Influence of Varied Inflow Conditions on Endwall Heat Transfer and Film Cooling Effectiveness GT Holger Werschnik, Jonathan Hilgert, Martin Bruschewski, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Hessen, Germany Altitude Effects on the Performance of Small Radial Turbomachinery: Part II Turbine Impellers GT Dries Verstraete, The University of Sydney, Sydney, NSW, Australia, Kjersti Lunnan, The University of Sydney, The University of Sydney, NSW, Australia 134 ASME 2016 TURBO EXPO

135 FRIDAY, JUNE 17 8:00-10:00 AM OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: ROTORDYNAMICS Transient Performance of Turbo-Generators HP/IP Turbines Blade Design and Operation Bearings - Modeling & Validation 2 Tutorial Session Room 317A FA Paper Session Room E6 FA-26-2 Paper Session Room 300 FA Session Chair: Pablo Bellocq, TOTAL Session Chair: Brian Haller, GE Power Session Co-Chair: Zhenping Feng, Xi an Jiaotong Session Chair: Tae Ho Kim, Kookmin University Session Co-Chair: Thomas Chirathadam, Southwest Research Institute Martin Conlon, National Research Council Canada 9:30 9:00 8:30 8:00 T U T O R I A L The Design and Testing of a Low Reaction Turbine Blade Profile for HP and IP Steam Flow Path GT Guoliang Deng, Dongfang Steam Turbine Co.,Ltd., Deyang,Sichuan,China, China, Qi Sun, Qilin Wu, Xiaoping Fan, Dongfang Steam Turbine Co.,Ltd., Deyang, Deyang,Sichuan, China, Mingyan Yin, Xi an Jiaotong University, Xi an, Shaanxi, China, Chaoyang Tian, Dongfang Steam Turbine Co.,Ltd., Deyang, Deyang,Sichuan, China, Yan Ping, Dongfang Steam Turbine Co.,Ltd., Deyang,Sichuan,China, China Reducing Solid Particle Erosion on Steam Turbine Stages GT Tie Chen, GE, Rugby, United Kingdom, Gurnam Singh, GE Power, Rugby, Warwickshire, United Kingdom, Peter Millington, Brian Haller, GE Power, Rugby, Warwickshire, United Kingdom Investigation on the Effect of Cooling Hole Structure on the Steam Cooling Performance of the Intermediate Pressure Turbine Stages GT Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China, Wenhao Huo, Xi An Jiaotong University, Xi An, Shaanxi, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China An Improved Test Facility for Studying Deposit Fouling on Steam Turbine Blades GT Alan May Estebaranz, Durham University, Co. Durham, United Kingdom, Richard Williams, Durham University, Durham, United Kingdom, Simon Hogg, School of Engineering, Durham, United Kingdom, Phil Dyer, Durham University, Durham, United Kingdom Theoretical Analysis and Numerical Simulation of Oil Lubricated Foil Bearing With Elastic Supported Bump Foil Structure GT Guanghui Zhang, Harbin Institute of Technology, Harbin, China, Qiang Chen, jiajia yan, zhansheng liu, xianghe wang, Harbin Institute of Technology, China, Harbin, China, Fangcheng Xu, University of Texas at Arlington, Arlington, TX, United States Non-Invasive Parameter Identification in Rotordynamics via Fluid Film Bearings: Linking Active Lubrication and Operational Modal Analysis GT Ilmar Ferreira Santos, Peter Svendsen, Technical University of Denmark, Kgs. Lyngby, Denmark Modeling a Spiral Groove Thrust Bearing Using 3-D, Two-Way Fluid Structure Interaction With Conjugate Heat Transfer GT Kevin Hoopes, Jason Wilkes, Jeff Moore, Southwest Research Institute, San Antonio, TX, United States, Joseph Grieco, Halliburton, na, TX, United States, Kevin Passmore, Halliburton, Carrollton, TX, United States, Jerry Brady, BP, Anchorage, AK, United States Saturated Water Journal Bearings of a Turbo Compressor GT Tadayoshi Shoyama, Kazuyuki Kouda, Takeshi Ogata, Panasonic Corporation, Moriguchi, Osaka, Japan FINAL PROGRAM 135

136 FRIDAY, JUNE 17 8:00-10:00 AM STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS, VIBRATION & DAMPING SUPERCRITICAL CO2 POWER CYCLES TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS Turbomachine Aerodynamic Interaction and Forced Response 1 sco2 System and Component Design Endwall Treatments and Tandem Blades Paper Session Room 307C FA-34-5 Paper Session Room 317B FA-36-6 Paper Session Room E1 FA-37-3 Session Chair: Maria Angelica Mayorca, Siemens Industrial Turbomachinery Session Co-Chair: Damian Vogt, University of Stuttgart Session Chair: Grant Musgrove, Southwest Research Institute Session Chair: Sungho Yoon, GE Global Research Session Co-Chair: Giridhar Jothiprasad, General Electric 8:00 Experimental Investigation of the Upstream Effect of Different Low Pressure Turbine Exit Guide Vane Designs on Rotor Blade Vibration GT Florian Schönleitner, Technische Universität Graz, Graz, Austria, Thorsten Selic, Christian Schitter, Franz Heitmeir, Andreas Marn, Graz University of Technology, Graz, Austria Preliminary Design and Considerations of a MWE Scale Supercritical CO2 Integral Test Loop GT Junfeng Wang, Yanping Huang, Jinguang Zang, Guangxu Liu, Nuclear Power Institute of China, Chengdu, China Numerical Study of Camber and Stagger Angle Effects on the Aerodynamic Performance of Tandem-Blade Cascades GT Behshad Ghazanfari, Isfahan University of Technology, Isfahan, Iran, Mahdi Nili-Ahamadabadi, Isfahan University of Technology, Esfahan, Iran, Ashkan Torabi Farsani, Mohammad Hossein Noorsalehi, Isfahan University of Technology, Isfahan, Iran 8:30 On the Effect of Axial Spacing Between Rotor and Stator Onto the Blade Vibrations of a Low Pressure Turbine Stage at Engine Relevant Operating Conditions GT Andreas Marn, Graz University of Technology, Graz, Austria, Florian Schönleitner, Technische Universität Graz, Graz, Austria, Mathias Mayr, Thorsten Selic, Franz Heitmeir, Graz University of Technology, Graz, Austria Integration and Optimization of Coal Gasification Systems With a Near-Zero Emissions Supercritical Carbon Dioxide Power Cycle GT Xijia Lu, University of New Orleans, New Orleans, NC, United States, Brock Forrest, Scott T Martin, Michael McGroddy, Jeremy Fetvedt, David Freed, 8 Rivers Capital, LLC, Durham, NC, United States Particle Image Velocimetry Investigations of a Subsonic Compressor Tandem Cascade GT Charlotte Hertel, TU Braunschweig, Braunschweig, Germany, Christoph Bode, Technische Universitaet Braunschweig, Braunschweig, OO, Germany, Dragan Kozulovic, Hochschule für Angewandte Wissenschaften Hamburg (HAW Hamburg), Hamburg, Germany, Tim Schneider, MTU Aero Engines AG, Munich, Germany 9:00 Maximum Mistuned Vibration Amplitude With Aerodynamic Damping GT Carlos Martel, Universidad Politécnica De Madrid, Madrid, Madrid, Spain, Luo Cuiping, Beijing Institute of Technology, Beijing, Beijing, China Supercritical CO2 Radial Turbine Design Performance as a Function of Turbine Size Parameters GT Jianhui Qi, Thomas Reddell, The University of Queensland, Brisbane, QLD, Australia, Kan Qin, The University of Queesnland, Brisbane, QLD, Australia, Kamel Hooman, The University of Queensland, Brisbane, QLD, Australia, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia Some Perspectives on the Treatment of Three-Dimensional Flows on Axial Compressor Blading GT Hayder Obaida, Motoyuki Kawase, Aldo Rona, University of Leicester, Leicester, Leicestershire, United Kingdom, J. Paul Gostelow, Leicester Univ, Leicester Le17rh, United Kingdom 9:30 Unsteady Forces in Last Stage LP Steam Turbine Rotor Blades With Exhaust Hood GT Romuald Rzadkowski, Jan Surwilo, Leszek Kubitz, Institute of Fluid Flow Machinery, Gdansk, Poland, Mariusz Szymaniak, Polish Academy of Sciences, Institute of Fluid-Flo, Gdansk, Poland, Piotr Lampart, Institute of Fluid Flow Machinery, Gdansk, Poland Forced Response Analysis of Supercritical CO2 Radial Inflow Turbine Designed for Concentrating Solar Power GT Mohsen Modir Shanechi, Martin Veidt, Kamel Hooman, Performance and Life Characteristics of Hybrid Gas Bearing in a 10 MW Supercritical CO2 Turbine GT Azam Thatte, Adrian Loghin, Youngwon Shin, Balajee Ananthasayanam Investigation on the Effect of Streamwise Grooves on Controlling Corner Flow Separation GT Wei-lin Yi, Lucheng Ji, Beijing Institute of Technology, Beijing, China, jiabin li, bit, beijing, China, Jia Yu, Beijing Institute of Technology, Beijing, China 136 ASME 2016 TURBO EXPO

137 FRIDAY, JUNE 17 8:00-10:00 AM TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS Rotor Tip Clearance Effects Specific Studies in Turbine Aerodynamics II Radial Compressors - Stall & Surge Paper Session Room 327 FA-37-9 Paper Session Room E4 FA Paper Session Room 403 FA-42-8 Session Chair: Anton Streit, Siemens AG, Session Co-Chair: Martin Lange, TU Dresden Session Chair: Theoklis Nikolaidis, Cranfield University Session Co-Chair: Eduardo Anselmi, Cranfield University, Giacomo Persico, Politecnico Di Milano Session Chair: Harold Hipsky, UTC Aerospace Systems 8:00 8:30 Effects of double-leakage tip clearance flow on the performance of a compressor stage with a large rotor tip gap GT Chunill Hah, NASA/Glenn, Westlake, OH, United States Accounting for Eccentricity in Compressor Performance Predictions GT Anna M. Young, University of Cambridge, Cambridge, Select State, United Kingdom, Teng Cao, University of Cambridge, Whittle Laboratory, Cambridge, United Kingdom, Ivor Day, Whittle Laboratory, Cambridge Cb3ody, United Kingdom, John Longley, Cambridge University, Cambridge, OTHER, United Kingdom Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet Analysis GT Rafael Adamczuk, FTT (UK) Ltd., Derby, United Kingdom, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany An Energy Based Fouling Model for Gas Turbines: EBFOG GT Nicola Casari, University of Ferrara, Ferrara, Italy, Alessio Suman, Università di Ferrara, Ferrara, Italy, Michele Pinelli, University of Ferrara, Ferrara, Italy, Luca Di Mare, Imperial College, London, United Kingdom, Francesco Montomoli, Imperial College London, London, United Kingdom A 3D Time-Accurate CFD Simulation of the Flow Field Inside a Vaneless Diffuser During Rotating Stall Conditions GT Michele Marconcini, University of Florence, Firenze, Italy, Alessandro Bianchini, Univ of Florence, Firenze, Italy, Matteo Checcucci, University of Florence, Firenze, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fiorentino (FI), Italy, Davide Biliotti, GE Oil&Gas, Firenze, Italy, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy Numerical Analysis of an Alternate Stall in a Radial Vaned Diffuser GT Emmanuel Benichou, Ecole centrale de Lyon, Ecully, France, Isabelle Trebinjac, LMFA - Ecole Centrale de Lyon, Ecully, France 9:00 Effects of Tip Clearance and Operating Conditions on the Flow Structure and Turbulence Within an Axial Compressor Rotor Passage GT Yuanchao Li, Huang Chen, Johns Hopkins University, Baltimore, MD, United States, David Tan, Johns Hopkins University, Columbia, MD, United States, Joseph Katz, Johns Hopkins University, Baltimore, MD, United States A Second Turbulent Regime When a Fully Developed Axial Turbulent Flow Enters a Rotating Pipe GT Ferdinand-J. Cloos, Anna-L. Zimmermann, Technische Universität Darmstadt, Darmstadt, Germany, Peter F. Pelz, TU Darmstadt, Darmstadt, Hessen, Germany An Investigation Into the Variation of Centrifugal Compressor Sensitivity to Inlet Swirl With Initial Form Parameter Selection GT Eric Krivitzky, ConceptsNREC, White River Junction, VT, United States 9:30 Numerical Analysis of Transonic Compressor With Various Tip Clearance Gap GT Yasunori Sakuma, The University of Tokyo, Tokyo, Japan, Toshinori Watanabe, Takehiro Himeno, University of Tokyo, Tokyo, Japan Thermal Investigation of Integrated Combustor Vane Concept Under Engine-Realistic Conditions GT Simon Jacobi, Budimir Rosic, University of Oxford, Oxford, United Kingdom Experimental Determination of Mechanical Stress Induced by Rotating Stall in Unshrouded Impellers of Centrifugal Compressors GT Philipp Jenny, Yves Bidaut, MAN Diesel & Turbo Schweiz AG, Zurich, Switzerland FINAL PROGRAM 137

138 FRIDAY, JUNE 17 8:00-10:00 AM TURBOMACHINERY: GENERAL INTEREST Presentations Tutorials Session Room 318C FA-43-1 Session Chair: Patricia Cargill, Ge Aviation US 8:00 CFD and Cloud Computing GT Michael Ni, Aerodynamic Solutions, Danville, CA, United States, Ron-Ho Ni, AeroDynamic Solutions, Inc., Manchester, CT, United States, William Humber, AeroDynamic Solutions, Inc, Danville, CA, United States, John Clark, Wright Patterson Air Force Base (AFRL), WPAFB, OH, United States 8:30 Root cause analysis: Untangling the truth when CFD simulations and Experimental Data do not match GT Ron-Ho Ni, AeroDynamic Solutions, Inc., Manchester, CT, United States, Michael Ni, Aerodynamic Solutions, Danville, CA, United States, William Humber, Rafael Mudafort, Aero- Dynamic Solutions, Inc, Danville, CA, United States, John Clark, Wright Patterson Air Force Base (AFRL), WPAFB, OH, United States 9:00 Development on The Three types of Centrifugal Compressor Model With High Efficiency GT Hong-won Kim, Fluid Machinery Research, Hyundai Heavy Ind Co Ltd, Ulsan , Korea (Republic), Young Hoon Kim, Fluid Machinery Research Department, Hyundai Heavy Industries Co., Ltd, Ulsan, Korea (Republic) 9: ASME 2016 TURBO EXPO

139 FRIDAY, JUNE 17 10:15AM - 12:45 PM AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS COMBUSTION, FUELS & EMISSIONS Inlets and Operability Ignition & Autoignition Combustion Dynamics: Damping & Control Paper Session Room E4 FB-1-1 Paper Session Room E3 FB-4-1 Paper Session Room 317C FB-4-23 Session Chair: Niklas Neupert, HSU Hamburg Session Co-Chair: Anthony Ferrar, University of Florida Session Chair: Holger Streb, Siemens Power Session Co-Chair: Christoph Hirsch, TU München Session Chair: Mirko Bothien, Ansaldo Energia Session Co-Chair: Nicolas Noiray, ETH Zurich 10:15 Entrance Aspect Ratio Effect on S-Duct Inlet Performance at High-Subsonic Flow GT Asad Asghar, Royal Military College Of Canada, Kingston, ON, Canada, Robert Stowe, DRDC Valcartier, Quebec City, QC, Canada, William Allan, Royal Military College Of Canada, Kingston, ON, Canada, Derrick Alexander, Martec Limited, Halifax, NS, Canada Coke Deposition Effect on the Flow Distribution Characteristics of KeroseneUnder Supercritical Pressure GT HaoRan Huang, HongWu Deng, GuoQiang Xu, ZhouXia Jia, YanChen Fu, Beihang University, Beijing, China Impact of Quarter Wave Tube Arrangement on Damping of Azimuthal Modes GT Max Zahn, Technical University Munich, Garching, Bavaria, Germany, Moritz Schulze, Technische Universitaet Muenchen, Garching bei Muenchen, Bavaria, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany 10:45 Low Frequency Distortion in Civil Aero-Engine Intake GT Mauro Carnevale, Imperial College of London, London, United Kingdom, Feng Wang, Imperial College London, London, United Kingdom, Luca Di Mare, Imperial College, London, United Kingdom Random Behavior of Kerosene Spray Autoignition in Crossflow GT Yongsheng Zhao, chi zhang, Yuzhen Lin, Beihang University, Beijing, China Effects of Fluidic Control of Air-Flow Distribution on Staged Lean Jet Engine Burner GT Seiji Yoshida, Japan Aerospace Exploration Agency, Tokyo, Japan, Denis Schneider, German Aerospace Center, Cologne, Germany, Christoph Hassa, German Aerospace Center, Köln, Germany 11:15 Fan-Intake Interaction Under High Incidence GT Teng Cao, Nagabhushana Rao Vadlamani, University of Cambridge, Whittle Laboratory, Cambridge, United Kingdom, Paul G. Tucker, University of Cambridge, Cambridge, United Kingdom, Angus R. Smith, Michal Slaby, Christopher T. J. Sheaf, Rolls-Royce plc, Derby, United Kingdom Influence of Main Swirler Vane Angle on the Ignition Performance of TeLESS-II Combustor GT Bo Wang, chi zhang, Yuzhen Lin, Xin Hui, Beihang University, Beijing, Beijing, China, Jibao Li, AVIC Commercial Aircraft Engine Co., Ltd, Shanghai, China Acoustic Damper Placement and Tuning for Annular Combustors: An Adjoint-Based Optimization Study GT Georg Atta Mensah, Technische Universität Berlin, Berlin, Germany, Jonas P. Moeck, TU Berlin, Berlin, Germany 11:45 12:15 Mixing Enhancement Induced by a Delta Wing in Supersonic Flows GT Wei Huang, Shi-bin Li, Li Yan, Jun Liu, National University of Defense Technology, Changsha, Hunan, China Mixing Enhancement with Rotating Ramps in a Scramjet Engine GT Liang Jin, Wei Huang, ZHEN LIU, Jun Liu, National University of Defense Technology, Changsha, China Development of a Model for Auto-Ignition Delays and Its Use for the Prediction of Premix Combustion Reliability GT Roda bounaceur, LRGP CNRS, Nancy, France, PIERRE ALEXANDRE GLAUDE, Cnrs Lrgp, Nancy, France, Baptiste Sirjean, René Fournet, LRGP CNRS, Nancy, France, Pierre Montagne, GE Power & Water, Belfort, France, Matthieu Vierling, GE Energy Products Europe, BELFORT, France, Michel Molière, UTBM (universite De Technologie De Belfort Montbél, BELFORT, France Liquid Fuel Composition Effects on Forced, Non-Premixed Ignition GT Brandon Sforzo, Georgia Institute of Technology, Atlanta, GA, United States, Hoang M. Dao, Aerojet Rocketdyne, Redmond, WA, United States, Sheng Wei, Georgia Institute of Technology, Atlanta, GA, United States, Jerry Seitzman, Georgia Inst Of Tech, Atlanta, GA, United States Control of the Precessing Vortex Core by Open and Closed-Loop Forcing in the Jet Core GT Phoebe Kuhn, Jonas Moeck, TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Kilian Oberleithner, Institute of Fluid Dynamics and Technical Acoustics, TU Berlin, Berlin, Berlin, Germany Effect of Preheating on Flame Structure of a Swirl Stabilized Combustor With Porous Insert to Control Thermoacoustics GT Daniel Depperschmidt, John Kornegay, James Allen, Ajay Agrawal, University of Alabama, Tuscaloosa, AL, United States FINAL PROGRAM 139

140 FRIDAY, JUNE 17 10:15AM - 12:45 PM CONTROLS, DIAGNOSTICS & INSTRUMENTATION CYCLE INNOVATIONS HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) Topics in Controls and Diagnostics Combined Cycles Performance Hot Gas Ingestion and Rim Seals II Tutorial Session Room 308B FB-5-1 Paper Session Room 317A FB-6-6 Paper Session Room 301 FB-15-8 Session Chair: Lubomir Ribarov, UTC AEROSPACE SYSTEMS, Session Co-Chair: William Rhoden, Hamilton Sundstrand, Manuj Dhingra, Pratt & Whitney, Sebastien Borguet, University of Liege, Yiguang Li, Cranfield University Session Chair: Tong-seop Kim, Inha University Session Organizer: Peter Smout, Rolls- Royce Session Co-Organizer: Charles Haldeman, Pratt/Whitney 10:15 Dynamic Turbine Clearance Simulation Considering the Influence of Temperature on Mechanical Load-Induced Displacements GT Roman L. Zelenskyi, Sergiy Yepifanov, IGOR F. KRAVCHENKO, Igor Loboda, Yevgen Martseniuk EXHAUST GAS RECIRCULATION TO IM- PROVE PART LOAD PERFORMANCE ON COMBINED CYCLE POWER PLANTS GT Klas Jonshagen, Siemens Industrial Turbomachinery ab, Finspong, Sweden Numerical Characterization of Hot Gas Ingestion Through Turbine Rim Seals GT Riccardo Da Soghe, Cosimo Bianchini, Ergon Research, Firenze, Italy, Carl Sangan, James Scobie, G.D. Lock, University of Bath, Bath, United Kingdom 10:45 11:15 Kalman Filter Development for Real Time Proper Orthogonal Decomposition Disc Temperature Mode GT Andrew van Paridon, University of Oxford, Oxford, Oxfordshire, United Kingdom, Marko Bacic, University of Oxford, Oxford, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom A Comparative Study on N-Dot Acceleration Technique GT Shubo Yang, Xi Wang, Beihang University, Beijing, China COMBINED CYCLE ENGINE CASCADES ACHIEVING HIGH EFFICIENCY GT Andy Schroder, University of Cincinnati, Fort Mitchell, KY, United States, Mark Turner, University of Cincinnati, Cincinnati, OH, United States, Rory A. Roberts, Wright State University, Dayton, OH, United States A Combined Power Plant Fueled by Syngas Produced in a Downdraft Gasifier GT bernardo fortunato, Sergio Camporeale, Marco torresi, francesco fornarelli, gianluigi brunetti, politecnico di Bari, Bari, Italy, Antonio Pantaleo, Università Di Bari, Bari, Italy Using a Tracer Gas to Quantify Sealing Effectiveness for Engine Realistic Rim Seals GT Kenneth Clark, Michael Barringer, Penn State University, State College, PA, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States, Carey Clum, Pratt & Whitney Corp., East hartford, CT, United States, Paul Hiester, Curtis Memory, Christopher Robak, Pratt & Whitney, East Hartford, CT, United States Pressure Distortion Effects on Rim Seal Performance in a Linear Cascade GT Jeffrey Gibson, Siemens Energy, Charlotte, NC, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States, Jesse Christophel, Curtis Memory, Pratt & Whitney, East Hartford, CT, United States, Thomas Praisner, Pratt And Whitney, Hartford, CT, United States 11:45 A Damage Evaluation Model of Turbine Blade for Gas Turbine GT Dengji Zhou, Shanghai Jiao Tong Univ, Shanghai, OO, China, Meishan Chen, Shanghai Jiao Tong University, Shanghai, China, Huisheng Zhang, Shanghai Jiao Tong Univ, Shanghai, China, Shilie Weng, Shanghai Jiao Tong University, Shanghai, China Gas Turbine Performance Enhancement by Inlet Air Cooling and Coolant Pre-Cooling Using an Absorption Chiller GT H. M. Kwon, Jeong ho Kim, Inha University, Incheon, Korea (Republic), Tong-seop Kim, Inha University, Incheon , Korea (Republic) Effects of Purge Jet Momentum on Sealing Effectiveness GT Kenneth Clark, Michael Barringer, Penn State University, State College, PA, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States, Carey Clum, Pratt & Whitney Corp., East hartford, CT, United States, Paul Hiester, Curtis Memory, Christopher Robak, Pratt & Whitney, East Hartford, CT, United States 12:15 Measurements and Modelling of Ingress in a New 1.5-Stage Turbine Research Facility GT Marios Patinios, James Scobie, Carl Sangan, University of Bath, Bath, Somerset, United Kingdom, J Michael Owen, University of Bath, Bath BA2 7AY, United Kingdom, G.D. Lock, University of Bath, Bath, Somerset, United Kingdom 140 ASME 2016 TURBO EXPO

141 FRIDAY, JUNE 17 10:15AM - 12:45 PM HEAT TRANSFER: COMBUSTORS (WITH COMBUSTION, FUELS & EMISSIONS) HEAT TRANSFER: EXPERIMENTAL FILM COOLING MICROTURBINES, TURBOCHARGERS & SMALL TURBOMACHINES Thermal-Structural Interaction - Experimental Validation Hole Geometry Effects-2 Microturbine Combustion and Fuels Paper Session Room 307A FB-18-2 Paper Session Room 307B FB-19-8 Paper Session Room 308C FB-23-5 Session Organizer: Jay Kapat, University of Central Florida (UCF) Session Co-Organizer: Jose Maria Rey Villazon, GE Aviation Session Chair: Stephen Lynch, Penn State University Session Co-Chair: James Rutledge, Air Force Institute of Technology Session Chair: Jeffrey Armstrong, Flexenergy Energy Systems Inc. 10:15 10:45 11:15 Novel Designs of Turbine Blades for Additive Manufacturing GT Liubov Magerramova, Boris Vasilyev, Central Institute of Aviation Motors, Moscow, Russia, Vladimir Kinzburskiy, Central Institute of Avation Motors, Moscow, Russia Structural Deflection's Impact in Turbine Stator Well Heat Transfer GT Julien Pohl, University of Leeds, Leeds, United Kingdom, Antonio Guijarro Valencia, ETSIA Universidad Politécnica de Madrid, Madrid, Spain, Vincenzo Fico, Gary A. Clayton, Rolls- Royce plc, Derby, United Kingdom, Harvey Thompson, University of Leeds, Leeds, United Kingdom, Gregorio Lopez Juste, ETSIA Universidad Politecnica de Madrid, Madrid, Spain Gas Turbine Shutdown Thermal Analysis and Results Compared With Experimental Data GT Vishnu Vardhan Reddy, General Electric, BANGALORE, Karnataka, India, Kathiravan Selvam, GE Oil & Gas, Bangalore, India, Roberto De Prosperis, GE Oil & Gas, Firenze, Italy Film Cooling Investigation of a Slot-Based Diffusion Hole GT Baitao An, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Jian-Jun Liu, Institute of Engineering Thermophysics, Beijing, China, Sijing Zhou, Xiaodong Zhang, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Chao Zhang, School of Automation, Tianjin University of Technology, Tianjin, China Experimental Study on the Film Cooling Characteristics of the Cylindrical Holes Embedded in Sine-Wave Shaped Trench GT Jiansheng Wei, Hui-ren Zhu, Cunliang Liu, Hui Song, Cong Liu, Northwestern Polytechnical University, Xi an, China, Tong Meng, Northwestern Polytechnical University, Xi an Shaanxi, China Heat Transfer Coefficients and Film Cooling Effectiveness of Transonic Turbine Vane Suction Surface Using TSP Technique GT Chao-Cheng Shiau, Nafiz H. K. Chowdhury, Shang-Feng Yang, Texas A&M University, College Station, TX, United States, JC Han, Texas A & M University, College Station, TX, United States, Alexander Mirzamoghadam, Honeywell International, Phoenix, AZ, United States, Ardeshir Riahi, Honeywell, Scottsdale, AZ, United States Operability Limits of Tubular Injectors With Vortex Generators for a Hydrogen Fuelled Recuperated 100kW Class Gas Turbine GT Stefan Bauer, Balbina Hampel, Technische Universität München, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany Combustion Characteristics of a Micro Gas Turbine Combustor With Gamma-Shaped Porous Media Dome GT Liang Zhang, chi zhang, Xin Xue, Peihua Lin, Yuzhen Lin, Beihang University, Beijing, China Experimental Investigation of Convergent and Convergent-Divergent Micro Swirling Flame Behavior and Stabilization GT Xintong Zhang, Yuzhen Lin, Xin Xue, Liang Zhang, chi zhang, Beihang University, Beijing, China 11:45 12:15 Experimental Observations Of Thermal Bow Due To Natural Convection On A Gas Turbine Compressor Rotor Shaft Analogue GT E.O. Smith, University of New South Wales / RAAF, Campbell, ACT, Australia, A.J. Neely, A.P. Butcher, University of New South Wales, Canberra, ACT, Australia Experimental and Numerical Investigation of Annular Casing Impingement Arrays for Faster Casing Response GT Andrew Dann, Priyanka Dhopade, Marko Bacic, University of Oxford, Oxford, United Kingdom, Leo Lewis, Rolls-Royce plc, Derby, Derbyshire, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom Combined Effects of Freestream Pressure Gradient and Density Ratio on the Film Cooling Effectiveness of Round and Shaped Holes on a Flat Plate GT Kyle Vinton, Travis Watson, Lesley Wright, Baylor University, Waco, TX, United States, Dan Crites, Mark Morris, Honeywell Aerospace, Phoenix, AZ, United States, Ardeshir Riahi, Honeywell, Scottsdale, AZ, United States Thermal Field Measurements for a Shaped Hole at Low and High Freestream Turbulence Intensity GT Robert Schroeder, Sargent & Lundy, Wheaton, IL, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States Micro Gas Turbine Firing Ammonia GT Norihiko Iki, AIST, Tsukuba, Ibaraki, Japan, Osamu Kurata, Advanced Industrial Science and Technolo, Ibaraki, OTHER, Japan, Takayuki Matsunuma, Nat l Inst. Of Adv Ind, Ibaraki, Japan, Takahiro Inoue, National Institute of Advanced Industrial Science, Tsukuba, Ibaraki, Japan, Taku Tsujimura, AIST, Koriyama, Fukushima, Japan, Hirohide FURUTANI, National Institute of Advanced Industrial (AIST), Koriyama, Fukushima, Japan, Hideaki Kobayashi, Tohoku Univ, Sendai , Miyagi, Japan, Akihiro Hayakawa, Akinori Ichikawa, Institute of Fluid Science,Tohoku University, Sendai, Miyagi, Japan, Yoshiyuki Arakawa, Tohoku university, Aobaku,Sendai,Miyagi, Japan FINAL PROGRAM 141

142 FRIDAY, JUNE 17 10:15AM - 12:45 PM OIL & GAS APPLICATIONS STEAM TURBINES STEAM TURBINES Basics of Rotordynamics Instrumentation & Data Acquisition LP Steam Turbine Exhausts HP/IP Turbines Blades and Rotor Tutorial Session Room E6 FB Paper Session Room 308A FB-26-5 Paper Session Room E2 FB Session Chair: Meera Day, Southwest Research Institute Session Chair: Simon Hogg, School of Engineering Session Co-Chair: Hiteshkumar Mistry, GE Global Research Session Chair: Manuel Ettler, Siemens AG Session Co-Chair: Manfred Wirsum, Rwth- Aachen University 11:45 11:15 10:45 10:15 T U T O R I A Numerical Analysis of the Swirl Flows in the Low Pressure Steam Turbine Exhaust Hood and Optimization GT Mingyan Yin, Chen Yang, Xi an Jiaotong University, Xi an, Shaanxi, China, Liu Meng, Wei Yan, Zhong Zhuhai, Dongfang Turbine Co., Ltd., Deyang, Sichuan, China, Jun Li, Institute of Turbomachinery, Xi an Jiaotong Univ., Xi an, Shaanxi, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China Parametric Experimental and Numerical Study of LP Diffuser and Exhaust Hoods GT Derek Taylor, GE Power, Rugby, Warwickshire, United Kingdom, Gurnam Singh, GE Power, Rugby, Warwickshire, United Kingdom, Phil Hemsley, Martin Claridge, GE Power, Rugby, Warwickshire, United Kingdom Performance Prediction and Optimisation of LP Steam Turbine Radial Diffuser at Design and Off-Design Conditions Using Streamline Curvature Method GT Luying Zhang, GE power, Rugby, Warwickshire, United Kingdom, Francesco Congiu, GE Power, Baden, Switzerland, Xiao-Peng Gan, GE Power, Rugby, Warwickshire, United Kingdom, David Karunakara, Infosys, Mysore, India Low Pressure Steam Turbine Exhaust Flow: Part 1 CFD Coupling of LP Turbine and Condenser Neck GT Peter Stein, Dirk Telschow, GE Power, Baden, Switzerland, Frederic Lamarque, GE Power, Levallois-Perret, France, Nuncio Colitto, General Electric Steam Power Systems, Cravanche, France Measured and Numerical Vibration Characteristics of Reliable 3D Designed Efficient IP Blades With a Wide Range of Operational Speed GT Matthias Strauch, Siemens AG, Goerlitz, Germany, Wolfgang Beer, Siemens, Nuremberg, Germany, Ingo Stephan, Siemens AG, Görlitz, Germany Optimization of a Steam Turbine Blade s Double-T Root through Contact Surface Convexity GT Johanna Ehlers, Technische Universitaet Muenchen, Muenchen, Bayern, Germany, Henning Ressing, Wulf-Christof von Karstedt, MAN Diesel & Turbo, Hamburg, Germany, Daniel Rixen, Technische Universitaet Muenchen, Garching, Germany, Mohamed S. Gadala, Univ Of British Columbia, Vancouver, BC, Canada New HP-/IP-Blades With Protective Coating for High Temperature Steam Application GT Manuel Ettler, Siemens AG, Muelheim an der Ruhr, NRW, Germany, Armin Delazzer, Siemens - Power and Gas Division, Mülhein, Germany, Albert Schrey, Joerg Schuerhoff, Siemens AG, Muelheim an der Ruhr, NRW, Germany Steam Turbine Rotor Transient Thermo-Structural Analysis and Lifetime Prediction GT Leonid Moroz, Boris Frolov, Roman Kochurov, Softinway Inc., Burlington, MA, United States 12:15 L Low Pressure Steam Turbine Exhaust Flow: Part 2 Investigation of the Condenser Neck Flow Field and 1D Modelling GT Dirk Telschow, Peter Stein, Hartwig Wolf, Alessandro Sgambati, GE Power, Baden, Switzerland The Role of Advanced Fracture Mechanics Evaluation Methods for Turbine Components GT Henning Almstedt, Siemens AG, Muelheim An Der Ruhr, Germany, Torsten-Ulf Kern, Siemens AG, Energy Sector, Muelheim, Germany, Michael Loehr, Siemens, Muelheim an der Ruhr, Germany, David Segletes, Siemens Energy Inc, Charlotte, NC, United States 142 ASME 2016 TURBO EXPO

143 FRIDAY, JUNE 17 10:15AM - 12:45 PM STRUCTURES & DYNAMICS: PROBABILISTIC METHODS STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION & DAMPING TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR AERODYNAMICS Probabilistic Method Application Turbomachine Aeroelasticity and Computational Methods 4 Advanced Measurements Paper Session Room 300 FB-29-1 Paper Session Room 307C FB-34-4 Paper Session Room 318C FB-37-4 Session Chair: Liping Wang, GE Corporate Res & Develop, Session Co-Chair: Michael Gorelik, FAA Session Chair: Sun Xiaofeng, Beijing University of Aeronautics and Astronautics Session Co-Chair: Toshinori Watanabe, University of Tokyo Session Chair: Eberhard Nicke, DLR Session Co-Chair: Roland Matzgeller, MTU Aero Engines AG 10:15 10:45 11:15 11:45 12:15 Random Vibration Analysis for Centrifugal Compressor Impellers with Unsteady Aerodynamic Excitations GT Yuefang Wang, Yan Liu, Dalian University of Technology, Dalian, China, Xuejun Wang, Shenyang Blower Works Group Co. Ltd, Shenyang, China, Hongkun Li, Dalian University, Dalian P. R., China, Daren Jiang, Shenyang Blower Workshop, Shenyang, China Micromechanics-Based Fracture Risk Assessment Using Integrated Probabilistic Damage Tolerance Analysis and Manufacturing Process Models GT Michael Enright, R. Craig McClung, Kwai Chan, Southwest Research Inst, San Antonio, TX, United States, John McFarland, Jonathan Moody, Southwest Research Institute, San Antonio, TX, United States, James Sobotka, Southwest Research Inst, San Antonio, TX, United States Optimal Automated Fracture Risk Assessment of 3D Gas Turbine Engine Components GT Michael Enright, Southwest Research Inst, San Antonio, TX, United States, Jonathan Moody, Southwest Research Institute, San Antonio, TX, United States, James Sobotka, Southwest Research Inst, San Antonio, TX, United States COMPARISON OF TWO METHODS FOR SENSITIVITY ANALYSIS OF COMPRES- SOR BLADES GT Robin Schmidt, TU Dresden, Dresden, Germany, Marcus Meyer, Rolls-Royce Deutschland, Blankenfelde-Mahlow, Germany, Matthias Voigt, TU Dresden, Dresden, Germany, Konrad Vogeler, Technische Universität Dresden, Dresden, Germany Creep Life Assessment of an Uncooled Turbine Blade Using Probabilistic Design GT Bjorn Sjodin, Siemens Industrial Turbomachinery AB, FINSPONG, Sweden On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks GT Malte Krack, University of Stuttgart, Stuttgart, Germany, Lars Panning-von Scheidt, Joerg Wallaschek, Institute of Dynamics and Vibration Research, Leibniz Universität Hannover, Hannover, Germany Numerical Investigation of Tip Clearance Flow Induced Flutter in an Axial Research Compressor GT Daniel Möller, Maximilian Jüngst, Felix Holzinger, Technische Universität Darmstadt, Darmstadt, Germany, Christoph Brandstetter, Technische Universitat, Darmstadt, Germany, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Hessen, Germany, Sebastian Leichtfuss, Turboscience, Darmstadt, Germany Numerical Investigation of Tip Clearance Flow Induced Flutter in an Axial Research Compressor GT Daniel Möller, Maximilian Jüngst, Felix Holzinger, Technische Universität Darmstadt, Darmstadt, Germany, Christoph Brandstetter, Technische Universitat, Darmstadt, Germany, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Hessen, Germany, Sebastian Leichtfuss, Turboscience, Darmstadt, Germany The Low Reduced Frequency Limit of Vibrating Airfoils: Part III B Numerical Quantification and Influence of Unsteady Loading GT Almudena Vega, Universidad Politecnica De Madrid, Madrid, Spain, Roque Corral, ITP, Alcobendas (Madrid), Spain Comparison Between Weak and Strong Coupling Modeling for Aeroelastic Stability of a Simple Sealing Device GT Nicolas de Cacqueray, Snecma, Réau, France, Martin Seive, Alain Kernilis, Snecma, Vernon, France Detecting Transition in Flat Plate Flow with Laser Interferometric Vibrometry (LIV) GT Pascal Bader, Wolfgang Sanz, Johannes Peterleithner, Jakob Woisetschlaeger, Franz Heitmeir, Graz University of Technology, Graz, Austria, Walter Meile, Guenter Brenn, Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, Graz, Austria Powerful Interpolation Method Demonstrated on Experimental Data From Fast Response Pressure Transducers in a Turbofan Engine GT Felix Kern, Stefan Bindl, University of the German Federal Armed Forces, Neubiberg, Germany, Marcel Stoessel, Federal Armed Forces, WTD 61, Manching, Germany, Svenja Aberle, University of the German Federal Armed Forces, Neubiberg, Germany, Reinhard Niehuis, University of the German Armed Forces Munich, Neubiberg, Bavaria, Germany Experimental and Numerical Flow Analysis of Low-Speed Fans at Highly Loaded Windmilling Conditions GT Aurélie Ortolan, SAFRAN Technofan, Blagnac, France, Suk-Kee Courty-Audren, Nicolas Binder, Institut Supérieur de l Aéronautique et de l Espace (ISAE), Toulouse, France, Xavier Carbonneau, ISAE, Toulouse, France, Florent Challas, SAFRAN Technofan, Blagnac, France Pressure Field Measurement on Compressor Cascade Using Pressure-Sensitive Paint GT Limin Gao, Xiaoquan Hu, Linchuan Tian, Ruiyu Li, Northwestern Polytechnical University, Xi an China, China Leveraging Correlation to Reduce Uncertainty in Efficiency Measurements for Low Pressure Ratio Fans GT Anthony Ferrar, University of Florida, Gainesville, FL, United States, William C. Schneck, III, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States, Walter O Brien, Virginia Tech University, Blacksburg, VA, United States FINAL PROGRAM 143

144 FRIDAY, JUNE 17 10:15AM - 12:45 PM TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS TURBOMACHINERY: NOISE & INNOVATIVE NOISE REDUCTION (WITH AIRCRAFT ENGINE) TURBOMACHINERY: RADIAL TURBOMACHINERY AERODYNAMICS Low Pressure Turbine Aerodynamics III Ducts and Noise Propagation, Jet Acoustics Radial Compressors - Performance & Manufacturing Aspects Paper Session Room 327 FB Paper Session Room E1 FB-41-3 Paper Session Room E5 FB-42-2 Session Chair: Reinaldo Araujo Gomes, University of the Federal Armed Forces Munich Session Co-Chair: Christian Wakelam, GE Global Research Session Chair: Alessandro Corsini, Sapienza University of Rome Session Co-Chair: Alessio Castorrini, Sapienza University of Rome Session Chair: Daniel Rusch, ABB Turbo Systems Ltd. Session Co-Chair: Satoshi Ohuchida, IHI Corporation 10:15 Influence of the Coriolis Force on the Flow in a Low Pressure Turbine Cascade T106 GT Oliver Baum, Technische Universität Dresden, Dresden, Germany, Denis Koschichow, Technische Universitat Dresden, Dresden, Germany, Jochen Fröhlich, Technische Universität Dresden, Dresden, Germany Predictive LES for Jet Aeroacoustics: Current Approach and Industrial Application GT James Tyacke, Iftekhar Naqavi, Zhong-Nan Wang, Paul G. Tucker, University of Cambridge, Cambridge, United Kingdom, Peer Boehning, Rolls-Royce Germany, Berlin, Germany Numerical Study of the Reynolds Number Effect on the Centrifugal Compressor Performance and Losses GT Jonna Tiainen, Ahti Jaatinen-Värri, Aki Grönman, Jari Backman, Lappeenranta University of Technology, Lappeenranta, Finland 10:45 Experimental Investigation of Pressure Side Flow Separation on the T106C Airfoil at High Suction Side Incidence Flow GT Stephan Stotz, University of the Federal Armed Forces Munich, München, Germany, Yavuz Guendogdu, MTU, Munich, Germany, Reinhard Niehuis, University of the German Armed Forces Munich, Neubiberg, Bavaria, Germany Investigations on Direct and Hybrid Sound Predictions GT Christofer Kendall-Torry, Florian Danner, Technical University of Munich, Garching, Bavaria, Germany Numerical and Experimental Investigation of Heat Transfer in a Low Flow Single Stage Centrifugal Compressor GT Michael Cui, William Hohlweg, Elliott Group, Jeannette, PA, United States 11:15 Experimental Investigation on the Time-Space Evolution of a Laminar Separation Bubble by POD and DMD GT Davide Lengani, Università degli Studi di Genova, Genoa, Italy, Daniele Simoni, University of Genova, Genova, Italy, Marina Ubaldi, Pietro Zunino, Università di Genova, Genova, Italy, Francesco Bertini, GE Avio, Torino, Italy An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields: Part I Design and Methodology GT Akif Mumcu, Christian Keller, Carolin Mandanna Hurfar, Leibniz Universität Hannover, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany The Development of a Low Specific Speed Centrifugal Compressor Research Facility GT Jeanne Methel, William J. Gooding, John Fabian, Nicole Key, Purdue University, West Lafayette, IN, United States, Mark Whitlock, Rolls- Royce MC SB-06, Indianapolis, IN, United States 11:45 12:15 Reynolds Stress Anisotropy in a Two- Stage Low Pressure Axial Turbine at Low Reynolds Numbers GT Jan Habermann, Stephan Staudacher, Martin G. Rose, Martin C. Arenz, Yavuz Guendogdu, Irene Raab Influence of Inflow Turbulence and Distortion on a Two-Stage Low Pressure Axial Turbine at Low Reynolds Numbers GT Christian H. Schulze, Stephan Staudacher, Martin G. Rose, Jan Habermann, Udo Freygang An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields Part II: Experimental Verification GT Carolin Mandanna Hurfar, Christian Keller, Akif Mumcu, Leibniz Universität Hannover, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany LES Predictions of Jet Noise for a Pylon-Mounted Dual Stream Nozzle and Jet Surface Interactions GT Patrick Vogel, JongHoon Bin, CRAFT Tech, Pipersville, PA, United States, Neerajj Sinha, Combustion Research & Flow Technology, Inc. (CRAFT Tech), Pipersville, PA, United States Development of a Centrifugal Compressor Facility for Performance and Aeromechanics Research GT Fangyuan Lou, Herbert Harrison, John Fabian, Nicole Key, Purdue University, West Lafayette, IN, United States, Darrell James, Honeywell Inc, Phoenix, AZ, United States, Rakesh Srivastava, Honeywell International, Pheonix, AZ, United States Manufacturing Considerations in the Initial Design Process GT Mark Anderson, Concepts NREC, Norwich, VT, United States, Peter Klein, Concepts NREC, Chelmsford, MA, United States 144 ASME 2016 TURBO EXPO

145 FRIDAY, JUNE 17 10:15AM - 12:45 PM TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY WIND ENERGY COAL, BIOMASS & ALTERNATIVE FUELS Unsteady Flows in Turbines I Small Wind Turbine Blade Aerodynamics Basics of Alternative Fuel Combustion and Emissions Paper Session Room 403 FB-44-1 Paper Session Room 318B FB-46-4 Tutorial Session Room 402 FB-3-6 Session Chair: Franz Malzacher, MTU Session Co-Chair: Emil Göttlich, Graz University of Technology Session Chair: Alessandro Bianchini, Univ of Florence Session Co-Chair: Juan Jauregui, University of Queretaro Session Chair: Jeffrey Bergthorson, McGill University Session Co-Chair: Gilles Bourque, Siemens Canada Limited 10:15 10:45 11:15 11:45 12:15 Development and Application of a Fast-Response Total Temperature Probe for Turbomachinery GT Martin C. Arenz, Björn Weigel, Jan Habermann, Stephan Staudacher, Martin G. Rose, Ewald Lutum, Wolfgang Berns, Unsteady Aerodynamics of a Flat Tip and a Winglet Tip in a High-Pressure Turbine GT Kai ZHOU, Chao Zhou, Peking University, Beijing, China Investigation of Unsteady Flow Phenomena in First Vane Caused by Combustor Flow With Swirl GT Simon Jacobi, Cosimo Maria Mazzoni, Krishan Chana, Budimir Rosic, University of Oxford, Oxford, United Kingdom Computational Simulation of Deposition in a Cooled High-Pressure Turbine Stage With Hot Streaks GT Robin Prenter, The Ohio State University, Columbus, OH, United States, Ali Ameri, The Ohio State University, Solon, OH, United States, Jeffrey Bons, Ohio State Univ, Columbus, OH, United States The Effects of Periodic Wakes on Boundary Layer Separation of Low-Pressure Turbine Using Large Eddy Simulation GT Xiaodi Wu, Fu Chen, Harbin Institute of Technology, Harbin, China, Yunfei Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China shawt Design: Airfoil Aerodynamics Under the Influence of Roughness GT David Holst, H.F.I. TU Berlin, Berlin, Germany, George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Christoph Tilman Kohlrausch, Christian Navid Nayeri, H.F.I. TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany Potential of Retrofit Passive Flow Control for Small Horizontal Axis Wind Turbines GT David Holst, H.F.I. TU Berlin, Berlin, Germany, George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Felix Wegner, Christian Navid Nayeri, H.F.I. TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany A Preliminary Study of the Blade Erosion for a Wind Turbine Operating in a Dusty Environment GT Aya Diab, Ahmed Hossam El-Din, Faculty of Engineering - Ain Shams University, Cairo, Egypt Small Horizontal Axis Wind Turbines: Current Status and Future Challenges GT Kenneth Van Treuren, Baylor University, Waco, TX, United States T U T O R I A L FINAL PROGRAM 145

146 FRIDAY, JUNE 17 2:30-5:30 PM AIRCRAFT ENGINE CYCLE INNOVATIONS ELECTRIC POWER WIND ENERGY Environmental Effects Cycle Performance Simulation Power Plant Optimization: Data & Modelling Condition Monitoring Paper Session Room E4 FC-1-3 Session Chair: Andrew Nix, West Virginia University Session Co-Chair: Yoji Okita, IHI Corporation Paper Session Room 317A FC-6-7 Session Chair: Ward De Paepe, Vrije Universiteit Brussel Session Co-Chair: Marina Montero Carrero, Vrije Universiteit Brussel Paper Session Room 308B FC-8-9 Session Chair: Seyfettin Can Gülen, Bechtel Tutorial Session, Room 308A, FC Session Chair: Juan Jauregui, University of Queretaro 2:30 3:00 3:30 4:00 4:30 5:00 Investigation of Hot Film Jet Vortex Effects on Droplets Characteristics Over Aero-Engine Inlet Strut GT YUN ZHANG, PENG KE, CHUNXIN YANG, GUANG- FENG YU, Beihang University, Beijing, Beijing, China Analysis of Droplet Impingement Characteristics of Aero-Engine Nose Cone With Hot Air Film GT Huiyun Yang, PENG KE, CHUNXIN YANG, Beihang university, beijing, beijing, China Comparison of the Sensitivity to Foreign Particle Ingestion of the GE-F101 and P/W-F100 Engines to Modern Aircraft Engines GT Christopher Cosher, Michael Dunn, The Ohio State University, Columbus, OH, United States Preliminary Experimental Investigation of Initial Onset of Sand Deposition in the Turbine Section of Gas Turbines GT Andrew Boulanger, Hardik Patel, Wing-Fai Ng, Srinath Ekkad, William DeShong, John Hutchinson, Weibin Xu Validation and Assessment of the Continuous Random Walk Model for Particle Deposition in Gas Turbine Engines GT Peter Forsyth, Matthew Mc- Gilvray, Vince Galoul, David Gillespie HIGH PRESSURE GAS FIRED IN- TERCOOLED SEMI-CLOSED RECU- PERATED CYCLE GT Hans Wettstein, HEW, CH Fislisbach, Switzerland Adapting the Zero-Emission Graz Cycle for Hydrogen Combustion and Investigation of Its Part Load Behaviour GT Wolfgang Sanz, Martin Braun, Herbert Jericha, Graz University of Technology, Graz, Austria, Max F. Platzer, AeroHydro Research & Technology Associates, Pebble Beach, CA, United States Thermo-Economic Evaluation of Novel Flexible CAES/CCPP Concept GT Stephan Herrmann, Steffen Kahlert, Manuel Wuerth, THartmut Spliethoff Steady State Performance Simulation of Natural Gas Pipeline Driven by Compressor Stations GT Yiguang Li, Cranfield University, Bedford Mk43 0al, United Kingdom, Suleiman Suleiman, Bait Alaseel for General Trading & Contracting Group, Kuwait, Kuwait ALGOR Gas Turbine Performance Modular Tool: One Dimensional Turbine Module Validation GT Stefano Piola, Roberto Canepa, Andrea Luca Silingardi, Stefano Cecchi, Carlo Carcasci, Edoardo Bolgè ALGOR Gas Turbine Performance Modular Tool: Map Based Modules Development GT Roberto Canepa, Stefano Piola, Marco Pirotta, Ansaldo Sviluppo Energia, Genova, Italy, Carlo Carcasci, University of Florence, Florence, OTH- ER, Italy, Andrea Luca Silingardi, Ansaldo Sviluppo Energia, Genoa, Italy, Federico Bonzani, Ansaldo Sviluppo Energia, Genova, Italy Identification of Thermodynamic Combined Cycle Design Parameters Using Multi Objective and Multi Variable Optimisation Methodologies to Achieve 65% Combined Cycle Power Plant Net Efficient GT Sevket Baykal, GE Power/Gas Power System/Gas Integrated System Technology, Baden, Switzerland, Peter Rufli, General Electric, Baden, Switzerland, Raffaele BOLLIGER, Francesco Fusaro, Hubert Kujawski, GE Power, Baden, Switzerland Exergoeconomic Analysis of a Combined Cycle of three levels of pressure GT Edgar Vicente Torres González, Raúl Lugo Leyte, Helen Lugo-Méndez, Martín Salazar Pereyra, Miguel Toledo Velazquez, Alejandro Torres Aldaco Advanced and Transformational Hydrogen Turbines for Integrated Gasification Combined Cycles GT Walter W. Shelton, U.S. Department of Energy/ NETL, Morgantown, WV, United States, Robin Ames, DoE National Energy Technology Lab, Morgantown, WV, United States, Richard Dennis, US Dept Of Energy, Morgantown, WV, United States, Charles W. White, Noblis, Inc, Falls Church, VA, United States, John E. Plunkett, Noblis Inc., Falls Church, VA, United States, James C., Fisher, U.S. DOE -NETL, Morgantown, WV, United States, Richard P., Dalton, LTI - NETL, Morgantown, WV, United States T U T O R I A L 146 ASME 2016 TURBO EXPO

147 FRIDAY, JUNE 17 2:30-5:30 PM HEAT TRANSFER: NUMERICAL FILM COOLING HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH TURBOMACHINERY) HEAT TRANSFER: EXPERIMENTAL FILM COOLING Numerical Analysis of Heat Transfer Labyrinth Seals General Film Cooling I Paper Session Room 301 FC-13-6 Paper Session Room 307A FC-15-4 Paper Session Room 307B FC-19-6 Session Organizer: Bhamidi Prasad, IIT Madras Session Co-Organizer: Cunliang Liu, Northwestern Polytechnical University Session Organizer: John Blanton, GE Power Session Co-Organizer: Jae Su Kwak, Korea Aerospace University Session Chair: Brett Barker, Rolls-Royce Session Co-Organizer: Michael Benson, U.S. Military Academy 2:30 Unsteady Adjoint of Pressure Loss for a Fundamental Transonic Turbine Vane GT Chaitanya Talnikar, Qiqi Wang, Massachusetts Institute of Technology, Cambridge, MA, United States, Gregory Laskowski, GE Aviation, Lynn, MA, United States Investigation on the Leakage Flow, Windage Heating and Swirl Development of Rotating Labyrinth Seal in a Compressor Stator Well GT Xiaozhi Kong, Gaowen Liu, Yuxin Liu, Qing Feng Experimental Investigation of Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions GT Ali Nikparto, Texas A&M University, College Station, TX, United States, Meinhard T. Schobeiri, Texas A & M University, College Station, TX, United States 3:00 Numerical Simulation on the Performance of Air-Air Primary Surface Heat Exchanger GT Yinze Liu, Wei Dong, Guilin Lei, Shanghai Jiao Tong University, Shanghai, Shanghai, China, Xiao Yu, Shenyang Engine Design and Research Institute, Shenyang, China Experimental and Numerical Investigation on Leakage Characteristic of Stepped Labyrinth Seal GT Li Zhang, Hui-ren Zhu, Cunliang Liu, Fei Tong, Northwestern Polytechnical University, Xi an, Shaanxi, China Application of Film Cooling to an Unshrouded HP Turbine Casing GT Matthew Collins, Kamaljit Chana, University of Oxford, Oxford, United Kingdom, Thomas Povey, Univ Of Oxford, Oxford, United Kingdom 3:30 4:00 Detailed Numerical Study of Flow and Vortex Dynamics in Staggered Pin-Fin Arrays Within a Channel GT Karthik Kannan, Mahzad Khoshlessan, Arizona State University, Tempe, AZ, United States, Marcus Herrmann, ASU, Tempe, AZ, United States, Yulia Peet, Arizona State University, Tempe, AZ, United States Numerical Study on Flow and Heat Transfer of a Cooled First Stage Vane of a Gas Turbine GT Lv Ye, Zhao Liu, Xiangyu Wang, Xi an Jiaotong University, Xi an, Shaanxi, China, Zhenping Feng, Xi an Jiaotong University, Shaanxi, Shaanxi, China Effect of Air-Curtains on Labyrinth Seal Performance GT Aakash Rai, Deoras Prabhudharwadkar, Sunil Murthy, Andrew Giametta, David Johns Leakage Degradation of Straight Labyrinth Seal due to Wear of Round Tooth Tip and Acute Trapezoidal Rub-Groove GT Yahya Dogu, Mustafa Cem Sertcakan, Koray Gezer, Mustafa Kocagul, ERCAN ARICAN, Murat Ozmusul Effects of Inlet Swirl on Pressure Side Film Cooling of Neighboring Vane Surface GT Yifei Li, Yang Zhang, Tsinghua University, BEI- JING, BEIJING, China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China Effects of Inlet Swirl on Suction Side Phantom Cooling GT Yang Zhang, Yifei Li, Tsinghua University, BEI- JING, BEIJING, China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China 4:30 5:00 Effect of Surface Roughness on Conjugate Heat Transfer of a Turbine Vane GT Hongyang Li, Yun Zheng, Beihang University, Beijing, China Unsteady Effects in the Heat Load Predictions for a Two-Stage Compressor Turbine GT Arman A. Farhanieh, Christoph Mau, HOSSEIN NADALI NAJAFABADI, Mats Annerfeldt, Matts Karlsson Labyrinth Seal Leakage Degradation due to Various Types of Wear GT Yahya Dogu, Mustafa Cem Sertcakan, Koray Gezer, Mustafa Kocagul, ERCAN ARICAN Murat Ozmusul Influence of Honeycomb Land Geometry on Seal Performance GT Daniel Fraczek, Wlodzimierz Wróblewski, Krzysztof Bochon, Silesian University of Technology, Gliwice, Poland Film Cooling Effectiveness Measurements on Trailing Edge Cutback Surface and Lands Following Novel Cross Corrugated Slot Geometry GT Tsun Holt Wong, University of Oxford, Oxford, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom, Kevin P. Self, Rolls- Royce plc, Bristol, United Kingdom Study of Film Cooling in the Trailing Edge Region of a Turbine Rotor Blade in High Speed Flow Using Pressure Sensitive Paint GT Niharika Gurram, University of Oxford, Oxford, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom, Tsun Holt Wong, University of Oxford, Oxford, United Kingdom, Kevin P. Self, Rolls-Royce plc, Bristol, United Kingdom FINAL PROGRAM 147

148 FRIDAY, JUNE 17 2:30-5:30 PM STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION & DAMPING TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS Seals - Modeling & Validation Turbomachine Aerodynamic Interaction and Forced Response 2 Three Dimensional Design Paper Session Room 300 FC-31-9 Paper Session Room 307C FC-34-6 Paper Session Room E1 FC Session Organizer: Mohamed-Amine HASSINI, EDF R&D Session Chair: Virginie Chenaux, German Aerospace Center (DLR)-AE Session Co-Chair: Harald Schoenenborn, MTU Aero Engines AG Session Chair: Martin G. Rose, Thermo-fluid Mechanics Research Centre (TFMRC), University of Sussex Session Co-Chair: Carsten Schneider, GE Global Research 2:30 Performance Analysis of Hybrid Brush Pocket Damper Seals Using Computational Fluid Dynamics GT Alexander Pugachev, Clemens Griebel, Technische Universitaet Muenchen, Garching, Germany, Stacie Tibos, GE Power, Rugby, United Kingdom, Bernard Charnley, GE Power, Steam Power Systems, Warwickshire, United Kingdom Simplified Determination of Aerodynamic Damping for Bladed Rotors. Part 1: Experimental Validation at Rest GT Bernd Beirow, Thomas Maywald, Felix Figaschewsky, Christoph Rocky Heinrich, Arnold Kuehhorn, Thomas Giersch Efficiency Improvements in an Industrial Steam Turbine Stage: Part 1 GT Srikanth Deshpande, Lund University, Lund, Sweden, Marcus Thern, Lund University, Faculty of Engineering, Lund, Sweden, Magnus Genrup, Lund University, Lund, Sweden 3:00 CFD Applied for the Identification of Stiffness and Damping Properties for Smooth Annular Turbomachinery Seals in Multiphase Flow GT Andreas Jauernik Voigt, Piero Iucidiani, Kenny Krogh Nielsen, Ilmar Ferreira Santos Simplified Estimation of Aerodynamic Damping for Bladed Rotors: Part 2 Experimental Validation During Operation GT Felix Figaschewsky, Arnold Kuehhorn, Bernd Beirow, Thomas Giersch, Jens Nipkau, Ferdinand Meinl fficiency Improvements in an Industrial Steam Turbine Stage: Part 2 GT Srikanth Deshpande, Lund University, Lund, Sweden, Marcus Thern, Lund University, Faculty of Engineering, Lund, Sweden, Magnus Genrup, Lund University, Lund, Sweden 3:30 Gas Dynamic Face Seal Tightness Under Non-Stationary Loading GT Renat Badykov, Alexandr Vinogradov, Samara State Aerospace University, Samara, Russia Investigation of Time/Frequency Domain CFD Methods to Predict Turbomachinery Blade Aerodynamic Damping GT Sunil Patil, Laith Zori, Philippe G. Godin, Juan Carlos Morales, Paul Galpin Secondary Flow Control in Low Aspect Ratio Vanes Using Splitters GT Christopher Clark, Graham Pullan, University of Cambridge, Cambridge, United Kingdom, Eric Curtis, Whittle Laboratory, Cambridge, United Kingdom, Frederic Goenaga, Rolls-Royce, Bristol, United Kingdom 4:00 4:30 5:00 Rotordynamic Computational and Experimental Characterization of a Convergent Honeycomb Seal Tested With Negative Pre- Swirl, High Pressure With Static Eccentricity and Angular Misalignment GT Giuseppe Vannini, GE, -, Italy, Carlo Mazzali, Statoil ASA, Fornebu, Norway, Harald Underbakke, STATOIL, 4314 Sandnes, Norway Impact Phenomena in a Non-Contacting Mechanical Face Seal GT Phil Varney, Georgia Institute of Technology, Atlanta, GA, United States, Itzhak Green, Georgia Inst Of Tech, Atlanta, GA, United States Response Surface Mapping of Performance for Helical Groove Seals With Incompressible Flow GT Cori Watson, Alexandrina Untaroiu, Neal R. Morgan, Hanxiang Jin, Brian Weaver, Houston G. Wood On the Scaling of Aeroelastic Parameters for High Pressure Applications in Centrifugal Compressors GT Florian Fruth, RWTH Aachen University, Aachen, Germany, Holger Franz, MAN Diesel & Turbo SE, Oberhausen, Germany, Peter Franz Jeschke, RWTH Aachen University, Aachen, Germany Aerodynamic Excitation Analysis for Variable Tip Gap GT Thomas Hauptmann, Leibniz Universität Hannover, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany A New Visualization Method for Harmonic Unsteady Flows in Turbomachinery GT Tobias Gezork, KTH Royal Institute of Technology, Stockholm, Sweden, Paul Petrie Repar, KTH Sweden, Stockholm, Sweden, Torsten Fransson, KTH, Heat and Power Technology, Stockholm, Sweden Aerodynamic Turbine Design for an Oxy-Fuel Combined Cycle GT Adrian Dahlquist, Siemens AB, Finspang, OTH- ER, Sweden, Magnus Genrup, Lund University, Lund, Sweden Design Optimization of Profiled Endwall With Consideration of Cooling and Rim Seal Flow Effects GT Huimin Tang, AVIC Commercial Aircraft Engine Co., LTD, Shanghai, China, Shuaiqiang Liu, Hualing Luo, AVIC COMMERCIAL AIRCRAFT ENGINE CO.,LTD, Shanghai, China Aerodynamic Performance of Novel Lightweight Turbine Blade GT Yoji Okita, IHI Corporation, Kanagawa, Japan, Kozo Nita, IHI Corporation, Nishitama-Gun, Tokyo, Japan, Seiji Kubo, IHI Corporation, Yokohama, Japan 148 ASME 2016 TURBO EXPO

149 FRIDAY, JUNE 17 2:30-5:30 PM TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR TURBOMACHINERY TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION & UNCERTAINTY QUANTIFICATION LES and DNS Compressor and Turbine Applications Unsteady Flows in Turbines II Surrogate-assisted methods (interpolation/regression, classification) Paper Session Room E5 FC Paper Session Room 327 FC-44-2 Paper Session Room 403 FC-45-1 Session Chair: Chunill Hah, NASA/Glenn Session Co-Chair: Koen HILLEWAERT, Cenaero Session Chair: Florian Herbst, Gottfried Wilhelm Leibniz Universitaet Session Co-Chair: Christoph Bode, Technische Universitaet Session Chair: Christian Voss, Deutsches Zentrum für Luft- und Raumfahrt e.v. (DLR) 2:30 3:00 3:30 4:00 Application of an Overset Grid Method to the Large Eddy Simulation of a High- Speed Multistage Axial Compressor GT Jerome de Laborderie, Florent Duchaine, Olivier Vermorel, Laurent Gicquel, CERFACS, Toulouse, France, Stephane Moreau, University of Sherbrooke, Sherbrooke, QC, Canada Evaluation of Centrifugal Compressor Performance Models Using Large Eddy Simulation Data GT Elias Sundström, Bertrand Kerres, KTH Royal of Technology, Stockholm, Sweden, Mihai Mihaescu, KTH Royal of Technology, Vallentuna, Sweden Application of High-Resolution Large Eddy Simulation to Simplified Turbomachinery Flows GT Susumu Teramoto, Univ Of Tokyo, Tokyo , Japan, Takuya Ouchi, IHI Corporation, Nishi-tama, Japan, Hiroki Sanada, The University of Tokyo, Tokyo, Japan, Koji Okamoto, University of Tokyo, Chiba, Chiba, Japan Adaptive Mesh Refinement for DDES Simulation on Transonic Compressor Cascade With Unstructured Mesh GT Jinlan Gou, Xinrong Su, Tsinghua University, Beijing, China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China Numerical Study on the Effects of the Upstream Wake Generator on the Aerodynamic Performance of a High-Lift Low Pressure Turbine Blade GT Fabio Bigoni, Stefano Vagnoli, Tom Verstraete, Tony Arts Large-Eddy Simulation of a High-Pressure Turbine Vane With Inlet Turbulence GT Solkeun Jee, Jongwook Joo, Gorazd Medic, United Technologies Research Center, East Hartford, CT, United States Delayed Detached-Eddy Simulations of a High Pressure Turbine Vane GT Dun Lin, Tsinghua University, Dept. of Thermal Eng., Beijing, China, Xinrong Su, Tsinghua University, Beijing, China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China On the Application of a Harmonic Balance Method With a Volume Source Cooling Model to the Simulation of a Film-Cooled Turbine Stage GT Kai Becker, Graham Ashcroft, Weber, Stefan Rochhausen, Jose Rodriguez, Gregor Schmid Modeling and Simulation of Common Core Gas Turbine Engine Variant Applications GT Jonathan Sands, Rolls-Royce Corporation, Plainfield, IN, United States, Alexander H. Karl, Rolls-Royce Corporation, Indianapolis, IN, United States, Dimitri Mavris, Georgia Institute of Technology, Atlanta, GA, United States A High-Dimensional Model Representation Guided PSO Methodology With Application on Compressor Airfoil Shape Optimization GT Amir Safari, University of Stavanger (UiS), Stavanger, Norway, Kambiz Hajikolaei, Simon Fraser University, Surrey, BC, Canada, Hirpa Lemu, University of Stavanger, Stavanger, Norway, Gary Wang, Simon Fraser University, Surrey, BC, Canada\ ampling Strategies and Metamodeling Techniques For Engineering Design: Comparison and Application GT Haitao Liu, Shengli Xu, Xiaofang Wang, Dalian University of technology, Dalian, Not Applicable, China Optimization of reinforcing ribs of a hollow fan blade using metamodel-based optimization algorithm GT Ying Ma, Dalian University of Technology,China, Dalian, China, Shengli Xu, Haitao Liu, Xiaofang Wang, Dalian University of Technology, Dalian, Liaoning, China 4:30 Wall Modeled LES and Its Impact on Rotor/Stator Cavity Unsteady Features GT Thibault BRIDEL-BERTOMEU, Laurent Gicquel, Gabriel Staffelbach, CERFACS, TOU- LOUSE, France An Investigation on Aerodynamics Loss Mechanism of Squealer Tips of a High Pressure Turbine Blade Using URANS GT Jinsol JUNG, Okey Kwon, Changmin Son, Pusan National University, Busan, Korea (Republic) Efficient Multi-Objective Optimization of Labyrinth Seal Leakage in Steam Turbines Based on Hybrid Surrogate Models GT Kevin Cremanns, Simon Hecker, Dirk Roos, Peter Dumstorff, Henning Almstedt, Christian Musch, 5:00 Large-Eddy Simulation Investigation of Impact of Roughness on Flow in a Low-Pressure Turbine GT Jongwook Joo, Gorazd Medic, Om Sharma, United Technologies Research Center, East Hartford, CT, United States Optimization of Tandem Blade Based on Improved Particle Swarm Algorithm GT song zhaoyun, Northwestern Polytechnical University, Xi an, China, Bo Liu, Northwestern Polytechnical University, Xi an Shaanxi, China, Mao xiaochen, Lu xiaofeng, Northwestern Polytechnical University, Xi an, China FINAL PROGRAM 149

150 Author Index FC-13-6 ThC-4-27 ThC-13-2 TA-12-1 WA-42-4 MB-13-1 ThB-2-1 ThB-8-8 ThB-45-7 FB-37-4 ThA-26-4 ThA-3-3 MB-4-25 FA ThA-39-7 ThA-38-8 ThB-31-7 ThC-21-5 TA-28-1 ThB-39-8 WB-32-6 ThB-26-9 WA-12-2 TB-19-2 WC-32-9 FB-4-23 TA-10-1 ThB-11-3 FA-2-2 WC-22-1 TC-4-28 WC-4-16 TB-36-4 WC-4-16 ThB-8-8 TA-4-14 FA-11-4 TB-28-2 WB-23-1 WA-46-6 WA-24-7 TB-20-4 WB-23-1 MB-4-12 FA-9-4 WC-42-6 FA-6-5 FB-1-1 WC-1-8 WC-9-3 WB-1-6 TB-30-3 FB-1-1 MA-5-3 FB-4-23 ThB-15-6 MB-26-8 ThC-45-8 FA-19-5 ThA-3-3 TB-25-1 WB-11-2 MB-27-2 MB-36-2 FB-44-1 FC-8-9 TC-15-2 FB-19-8 WB-44-5 MA-9-2 MA-37-5 WA-10-3 FA-36-6 B TB-20-4 WC-19-1 FB-42-2 WB-4-20 MB-21-1 A. Farhanieh, A Abanteriba, S Abba, L Abdala, A Abdallah, S Abdeh, H Abdi, F Abe, M Abenhaim, A Aberle, S Abhari, R Aboujaib, M Abou-Taouk, A Adamczuk, R Adamczyk, J Adami, P Adeniyi, A Adharapurapu, R ADJEI, R Afzal, A Afzal, M Afzalifar, A Agati, G Aghasi, P Agrapart, Q Agrawal, A Aguilar, B Ahlfeld, R Ahmad, J Ahmadi, M Ahmed, A Ahmed, I Ahn, Y Ahrens, D Ai, T Aigner, M Aillaud, P Akanda, S Al Jubori, A Al-Abadi, A Alas, P ALBUSAIDI, W AL-Dadah, R Aldén, M Aldi, N Alescio, G ALEX SAM, A Alexander, D Alexiou, A Alhajeri, H Ali, F Allaire, P Allan, W Allen, C Allen, J Allison, T Almstedt, H Alpman, E Alqefl, M Altaher, M Alves de Moura, A Amano, R Ambur, R Ameli, A Ameri, A Ames, R Amirante, D An, B An, G An, J An, K An, Y Ananthasayanam, Ancona, M Anderson, J Anderson, M Andersson, N Andersson, O ThC-25-3 ThA-16-2 WA-4-22 WC-5-7 ThA-3-3 WC-22-1 ThA-20-7 FA-4-29 FC-13-6 WA-29-2 ThB-34-3 TC-17-2 FB-23-5 WB-26-1 FB WC-1-8 ThA-15-5 MA-4-5 FC-15-4 WC-13-3 MA MB-32-5 TB-16-3 ThC-23-3 WA-29-2 WC-4-19 WB-26-1 ThA-23-2 WB-32-6 WA-16-4 ThC-4-27 FB-1-1 ThA-39-7 TA-23-8 ThC-38-2 TC-15-2 MB-27-2 TB-37-1 WC-25-2 MB-1-14 MB MB-4-12 TC-23-7 ThA-23-2 MB-23-9 TA-28-1 WC-39-6 WC-44-3 ThC-17-3 FB-5-1 ThB-7-3 FB-37-4 FC-31-9 ThC-44-7 MA-32-2 WA-12-2 WC-5-7 WC-25-2 ThC-39-9 WB-36-1 WA-24-7 MA-41-1 MA-24-8 WB-15-1 TC-46-2 ThC-17-3 TB-39-4 TC-5-4 WA-41-2 ThB-7-3 TA-39-1 MA-4-5 ThA-3-3 MB-40-3 WB-6-3 TB-42-1 WB-4-11 ThA-12-4 ThB-15-6 Andreasen, J Andrei, L Andreini, A Andreoli, V Andrews, G Andriets, O Angello, L Anisimov, V Annerfeldt, M Antoniou, R Aotsuka, M Araguas, S Arakawa, Y Arcangeli, L Arenz, M Aretakis, N Arghir, M Ariatabar, B ARICAN, E Arisi, A Arkhipova, L Armand, J Armellini, A Armstrong, J Armstrong, N Arndt, C Arnone, A Arroyo, A Arteaga, I Arts, T Asai, T Asghar, A Ashcroft, G Ashton, Z Atkin, C Atkins, N AUBERT, S Auchoybur, K aus der Wiesche, S Avellán, R Averbach, M Avgustinovich, V Avola, C Axelsson, L Aymanns, R Azimov, R Ba, W Babak, M Bacci, T Bacic, M Backman, J Bader, P Badykov, R Baek, J Baek, S Baek, S Bagchi, I Bahr Ennil, A Baier, D Baik, Y Bainier, F Bake, F Bakken, L Balasubramanian, J Balduzzi, F Balmer, C Banda, B Banerjee, A Banica, M Banjac, M Banks, G Bao, X Barari, G Barbarossa, F Barberis, S Barbieux, V Barfuß, C Barigozzi, G Barnes, C WC-42-6 TB-39-4 FB-15-8 MB-5-8 TC-4-18 WC-32-9 TA-39-1 WB-32-6 TC-46-2 TB-39-4 ThC-1-5 FB-23-5 FB ThA-4-3 TC-15-2 FC-8-9 WB-15-1 ThA-4-3 ThC-13-2 MA-24-8 TB-28-2 MA-37-5 FC-44-2 ThC-4-27 TB-26-3 FB ThC-1-5 WC-38-1 ThB-2-1 FC-34-6 TC-24-1 ThA-22-2 WB-42-3 TC-17-2 TA-1-11 WB-26-1 ThA-34-2 WB-31-3 MA-9-2 FA-42-8 TC-46-2 ThC-24-2 MA-26-7 MA-4-21 ThC-17-3 FA-3-4 ThB-4-26 TA-4-13 TA-4-13 FB-44-1 WC-45-6 TA-38-7 ThC-1-5 TC-17-2 WA-4-22 TA-38-7 WB-4-20 MA-24-8 WA-32-7 TA-30-4 ThC-4-24 TB-4-2 WB-39-5 MA-5-3 MB-20-3 TC-24-1 FB-15-8 TC-32-8 FA-42-8 WA-3-1 ThB-15-6 WC-32-9 TA-38-7 WC-44-3 FA-42-8 ThA-22-2 FB-41-3 MA-21-3 FB-37-4 Barrera-Medrano, M Barrier, R Barringer, M Bartsch, C Basso, R Batailly, A Bather, S Battiato, G Battisti, L Baturin, O Bauer, H Bauer, S Baum, O Baust, T Bavassano, F Baykal, S Beard, P Beaunier, J Becchi, R Beck, G Beck, J Becker, B Becker, K Beckmann, N Becs, B Beer, W Behdinan, K Behre, S Behrendt, T Beirow, B Belardini, E Bellamy, N Bellobuono, E Bellocci, L Bellocq, P Bellucci, J Beloki, J Bender, B Benedek, T Benichou, E Benini, E Bennett, J Benra, F Berger, F Berger, S Bergthorson, J Bergthorson, J Berndt, P Bernero, S Berns, W Berridge, C Berrino, M Berten, O Berthier, S Bertini, D Bertini, F Bertolotto, E Bertoneri, M Bestle, D Betti, D Bhattacharya, C Bhayaraju, U Bi, Q Bianchi, E Bianchi, M Bianchini, A Bianchini, C Bickerton, R Bidaut, Y Bidini, G Bidkar, R Bielecki, M Biester, M Bigoni, F Biliotti, D Bin, D Bin, J Binder, M Binder, N FB-37-4 TC-32-8 WC-32-9 MB-37-2 TA-32-1 ThB-39-8 TB-32-3 ThA-39-7 TC-4-18 MB-32-5 TB-4-6 FC-15-4 WC-4-19 MB FB-41-3 MA TB-19-2 MB-21-1 TB-23-6 MA-11-1 FC-8-9 ThC-23-3 FC-8-9 TC-7-1 TB-39-4 MB-26-8 ThA-16-2 ThC-17-3 TA-11-5 FC-8-9 WA-3-1 ThC-31-6 FA-3-4 MB-26-8 MA ThA-26-4 TC-4-28 FC-1-3 FB-4-1 TA-37-6 MB-1-14 MA-24-8 FA-3-4 TA-23-8 TC-23-7 WC-38-1 WC-31-2 WA-6-2 MB-20-3 FB-34-4 FC-6-7 TB-4-2 TB-3-2 TA-37-6 FB-37-4 WB-4-17 WC-9-3 ThA-15-5 FC TC-46-2 MA-26-7 WA-4-22 MA WC-9-3 MB-21-1 ThC-24-2 TB-28-2 WA-32-7 TC ThB-7-3 FB-6-6 FA-19-5 WB-11-2 WB-31-3 FA-16-5 TA-21-2 MA-11-1 FA-4-9 FA-11-4 Bindl, S Bingham, C Bisagni, C Bitter, M Bladh, R Blanc, F Blanc, L Bleh, A Blümner, R Bo, S Bobusch, B Bochon, K Bockhorn, H Bode, C Boehning, P Bogachev, A Bogard, D Bogdanic, L Bogner, M Bohn, D Bolgè, E Bolin, C BOLLIGER, R Bonanni, T Boniface, J Bonilla-Blancas, A Bonini, A Bonneau, G Bons, J Bonzani, F Booras, G Borchard, H Borello, D Born, D Bosco, A Bosdas, I Bosnoian, J Boulanger, A bounaceur, R Bourassa, C BOURGOIS, S Bourn, G Bourque, G Boyaci, A Brace, C Brachmanski, R Brady, J Bram, S Branchini, L Brandstetter, C Braun, M Braun, S Braun-Unkhoff, M Breeze-Stringfellow, A Brenn, G Brennan, J Breviario, F Bricaud, C BRIDEL-BERTOMEU, T Brighenti, A Brillert, D Briones, A Bristot, A Brivio, D Brodin, H Brogelli, R Brown, J Brown, T Brück, C Brun, K Brunetti, G Bruschewski, M Bu, S Buchhorn, N Bucknell, A Buecklers, T Bühler, P Bulat, G Burberi, E 150 ASME 2016 TURBO EXPO

151 Author Index WC-9-3 ThA-4-3 TC-23-7 ThC-17-3 WA-4-22 ThC-45-8 ThA-28-4 MB FB-18-2 TC-13-7 MB-1-14 TC-31-1 MA-21-3 MA-4-21 WC-38-1 TC-45-2 TA-28-1 WC-4-16 MB-21-1 TA-10-1 MA-21-3 ThA-34-2 MB MA-4-21 WB-12-3 MB-4-25 FB-6-6 WC-4-19 TB-25-1 ThC-4-24 WC-4-19 FC-8-9 MB-30-1 MB-4-25 TB-3-2 TB-30-3 FB-1-1 TC-5-4 ThB-34-3 WC-1-8 ThB-11-3 TC-32-8 WB-1-6 FC-8-9 TC-7-1 WB-36-1 WB-1-6 ThC-23-3 WC-17-1 ThA-28-4 FA TB-16-3 ThB-34-3 WC-25-2 ThB-9-1 FA-9-4 TA-30-4 ThA-4-3 TC FC-8-9 WA-16-4 WB-4-20 WA WB-12-3 MB-36-2 FB-37-4 FB-29-1 WA-16-4 FB-44-1 WC-5-7 ThC-1-5 WA-16-4 TB-39-4 ThB-45-7 WA-26-6 ThC-23-3 FA-6-5 ThB-46-1 MB-30-1 Burgmann, S Burke, E Burke, R Burri, D Burrus, D Buske, C Busse, C Busse, P Butcher, A Buzzard, W Caballero, O Cable, T Cabrera, J Cademartori, R Cadrecha, D Cai, Y Cai, Z Cakmakci, A Calderon, L Caloni, S Calvo, J Calza, P Camci, C Campa, G Campana, N Campilongo, S Camporeale, S Camporeale, S Campos Rordriguez, C Camussi, R Candel, S Canepa, R Cangioli, F Cant, R Canteenwalla, P Cao, J Cao, T Cao, Y Capece, V Capitao Patrao, A Capone, L Carassale, L Carbonneau, X Carcasci, C Cardillo, L Carlson, M Carnevale, M Carney, M Carter, A Carter, B Casari, N Casarsa, L Casartelli, E Casati, E Castegnaro, S Castorrini, A Catanzaro, M Caudal, J Cave, M Cecchi, S Cernat, B Cerutti, M Cervantes de Gortari, J Cha, B Cha, J Challas, F Chan, K Chan, S Chana, K Chana, K Chandra, B Chang, S Chappati, V Chaquet, J Charnley, B Charron, F Chasoglou, A Chatterjee, T Chatterton, S TA-23-8 Chatzisavvas, I TB-4-2 Chaussonnet, G TB-19-2 Chavez, K FA-42-8 Checcucci, M MB-4-25 Chechet, I MA-11-1 Chedevergne, F FA-19-5 Chen, A MA-38-4 Chen, C WB-28-3 Chen, C ThA Chen, F ThB Chen, H WB-37-7 Chen, H WB-39-5 Chen, H TA-6-1 Chen, J TC-45-2 Chen, J MB-27-2 CHEN, L FB-5-1 Chen, M FA Chen, Q ThA-38-8 Chen, Q MB-23-9 Chen, S ThA-12-4 Chen, S FA-26-2 Chen, T MB-26-8 Chen, T MA-11-1 Chen, X TC-31-1 Chen, X ThC-44-7 chen, X MA-27-1 Chen, Y MA-38-4 Chen, Y TC-5-4 Chen, Y WB-12-3 Chen, Y WB-44-5 Chen, Z TC Cheng, B ThC-45-8 Cheng, H ThA-26-4 Cheng, K WB-26-1 Cheon, J TC-15-2 Chew, J MB-45-4 Chi, Z TB-26-3 Chiba, K WA Chicurel Uziel, E TB-20-4 Chidambaram, P MB-30-1 Childs, D MB Chilla, M ThC-4-24 Chiocchini, S TB-3-2 Chishty, W ThC-38-2 Cho, J WB-36-1 Cho, J MB-36-2 Cho, S TC-21-4 Choi, H ThB-39-8 Choi, J ThB-2-1 Choi, S ThC-31-6 Choi, T ThC Chokani, N FA-19-5 Chowdhury, N TC-1-9 Christie, R FB-15-8 Christophel, J WC-42-6 Christou, G WC-4-19 Chterev, I MA-37-5 Chu, W ThC-44-9 Chung, J FA-11-4 Chyu, M ThB-11-3 Ciani, A FA-15-7 Cipolla, L MB-4-12 Citeno, J TC-23-7 Clancy, C FB-26-5 Claridge, M FC Clark, C ThB-34-3 Clark, J FB-15-8 Clark, K FB-18-2 Clayton, G WB-36-1 Clementoni, E TC-1-9 Cloos, F FB-15-8 Clum, C FA-11-4 Cocchi, L MA-27-1 Colantoni, S FB-26-5 Colitto, N MB-4-12 Collin, R FC-19-6 Collins, M ThA-1-10 Colonna, P FB-26-5 Congiu, F WB-31-3 WA-6-2 TA-4-13 WA-4-22 TC TC-23-7 MB-1-14 ThC-1-5 TB-37-1 TB-25-1 MA-11-1 TC-7-1 WA-24-7 FC-1-3 WB-26-1 TC-4-18 WB-28-3 WC-32-9 TB-25-1 TC-17-2 MA-4-5 WB-38-6 TA-5-6 ThC-23-3 FB-37-4 MB-1-14 WB-36-1 WC-25-2 FC-45-1 WC-19-1 ThA-6-4 ThA-6-4 ThC-44-7 ThC-38-2 FB-42-2 FA-34-5 WB-23-1 WB-1-6 TC-13-7 ThC-38-2 TB-23-6 ThA-39-7 ThC-25-3 TC-4-18 TC-15-2 TB-3-2 FC MB ThC-44-7 WB-15-1 TB-3-2 FC-8-9 ThA-22-2 MB-30-1 TB-26-3 FB-18-2 FB-41-3 FB-4-1 TB-4-2 WA-10-3 TB-16-3 TC-1-9 TB-3-2 TB-44-4 FA-37-9 ThC-24-2 FB-34-4 MB-4-25 FC WC-5-7 WB-23-1 MA-5-3 WA-6-2 MB-20-3 FB-18-2 TC-31-1 WC-25-2 ThB-19-3 MB-37-2 Conti, R Contino, F Coogan, S Cooper, J Cooper, P Copeland, C Coppola, M Cordes, L Cornelius, C Coronado Rodriguez, C Corral, R Corsini, A Cortinovis, A Cosher, C Cosi, L Cosic, B Costa, A Costagliola, S Costall, A Cottin, G Cottle, A Coull, J Courdier, A Courtois, N Courty-Audren, S Cousins, W Cox, T Cozzi, F Cremanns, K Crites, D Cuciuc, T Cuciumita, C Cui, B Cui, J Cui, M Cuiping, L Cukurel, B Culmone, M Curbelo, A Curkovic, O Curtis, E Cvijetic, G Czapla, J Czarske, J Da Soghe, R Dagaut, P Dahlquist, A Dahlqvist, J Dakun, S D'Alessandro, A Dally, B Dalton, R Dan, K Dang, P Dankert, M Dann, A Danner, F Dao, H Dauch, T Dauptain, A Davis, A Davis, R Davison, C Dawes, W Day, I Day, M de Cacqueray, N De Giorgi, M de Laborderie, J De Maesschalck, C De Miranda Ventura, C de Oliveira, M De Paepe, W De Pascale, A De Prosperis, R De Santiago, O De Servi, C Dees, J Defoe, J MB-23-9 Dehner, R TC-23-7 Deichsel, M ThC-3-8 Del Turco, P WC-17-1 DeLancey, J FB Delazzer, A ThB-45-7 Delecourt, A WA-46-6 Delgado, A TC-7-1 Delibra, G TB-38-3 Demolis, J TC-4-28 Demougeot, N ThB-31-7 Den, S FA-26-2 Deng, G FB-4-1 Deng, H TC-32-8 DENG, P MB-10-2 DENG, Q WC-44-3 Deng, Q ThB-7-3 Deniz, S TC-3-5 Dennis, R FB-4-23 Depperschmidt, D ThB-11-3 D'Ercole, M FC-1-3 DeShong, W FC Deshpande, S FA-5-10 Desmet, W ThC-45-8 Deveci, K TC-31-1 Devitt, D MB-36-2 Dhar, E TA-36-3 Dheeradhada, V FB-18-2 Dhopade, P FA-3-4 Di Carlo, A MA di Mare, F WB-1-6 Di Mare, L ThC-24-2 Di Pillo, P MB-27-2 Di Sisto, P WA-46-6 Diab, A FA-3-4 Diaz Gomez Maqueo, P WB-12-3 Dickhoff, J MB-45-4 Didenko, R TB-23-6 Diefenthal, M FA-23-4 Diener, O TA-4-14 Dierke, J ThB-9-1 Dierks, M TB-3-2 Diévart, P ThA-28-4 Dimaggio, D TC-23-7 Dimitriou, P TB-30-3 Dimond, T ThA Ding, Y TC-23-7 Ding, Z FA-5-10 Dinkelacker, F ThC-39-9 Diosady, L WB-4-11 Ditaranto, M WC-44-3 Dittmar, M MA-21-3 Döbbeler, B FC-15-4 Dogu, Y MA-26-7 Dohmen, H WC-5-7 Doll, U ThC-4-24 Domen, S MA-26-7 Domnick, C TB-37-1 Donahoo, E FC-13-6 Dong, W ThA-22-2 Dong-ming, X MB-1-14 Donnerhack, S MB-45-4 Doostan, A TC-17-2 Dord, A ThA-26-4 Dorey, J FA-2-2 DorMohammadi, S WC-25-2 Dossena, V ThB-42-7 Dostal, L WB-36-1 Dostal, V ThC-44-7 Dou, H TB-30-3 dousti, S MB-14-2 Downs, J WC-5-7 Dr. Meier, U ThC-45-8 Dresbach, C WC-13-3 Drouin, V TA-44-6 DRUZHININ, I MA-11-1 Du, C TB-13-5 DU, K WB-20-5 Du, Q MB Du, X FINAL PROGRAM 151

152 Author Index TC Du, X TC-17-2 Du Toit, B TA-32-1 Duan, Y ThC-23-3 Dubois, P WA-10-3 Duchaine, F WC-32-9 Duckitt, S TA-4-14 Ducruix, S ThB-39-8 Dufour, G MB-26-8 Dumstorff, P FC-1-3 Dunn, M MB-23-9 Durali, M WC-4-19 Durox, D FA-26-2 Dyer, P WC-15-3 Ealy, B ThC-23-3 Ebrahim, M ThB-42-7 Eckert, T FA-6-5 Efstathiadis, T FB Ehlers, J MB-4-12 Ehn, A TB-23-6 Ehrhard, J ThA-4-7 Eiringhaus, D WC-1-8 Eitelberg, G WC-4-19 Ek, H MA-5-3 Ekinci, S FC-1-3 Ekkad, S WC-9-3 Elasha, F WB-42-3 Elfert, M MA-14-3 El-Gabry, L MB-10-2 El-Jummah, A WB-1-6 Ellbrant, L ThA-34-2 Elliott, R TA-10-1 Elliott, T WB-1-6 Elmdahl, D TA-12-1 Elwekeel, F WC-4-19 Emerson, B TA Emory, M TB-23-6 Engeda, A MA Engel, K WC Enright, M MA-32-2 Epureanu, B WA-4-22 Erdmann, T ThA-3-3 Erenburg, V WB-4-20 Eriksson, L WA-32-7 Ermakov, A ThB-46-1 Ernst, B ThA-15-5 Escudero-Olano, M ThC-31-6 Esser, P WB-4-17 Estefanos, W MB-21-1 Etter, T FB Ettler, M MB-27-2 Evangelisti, S ThB Evans, K ThA-42-9 Everitt, J TA-4-14 Ewert, R FB-42-2 Fabian, J ThA-23-2 Fabian, M WB-4-20 Facchini, B ThA-23-2 Falaleev, S MA-24-8 Falomi, S MB-26-8 Fan, S FA-26-2 Fan, X MA-11-1 Fan, X WA-3-1 Fantozzi, F ThC-44-7 Fanyu, L TC-17-2 Färber, J ThB-2-1 Faucett, D MA-41-1 Faustmann, C TA-11-5 Fei, J MB-32-5 Feilong, Y TC-17-2 Feist, J WA-41-2 Feld, H MA-18-1 FENG, D ThA Feng, J WC-15-3 Feng, Q MB-10-2 Feng, Z ThB-19-3 Fernandez, E MB-27-2 Ferrand, P MB-37-2 Ferrar, A MB-5-8 Ferrara, G MA-24-8 Ferrara, V MB-5-8 Ferrari, L TA-30-4 Ferraro, R FA-36-6 Fetvedt, J MB-4-25 Ficarella, A ThB-15-6 Fico, V MA Fiedler, J MA-18-1 Fien, A FC-34-6 Figaschewsky, F TC-46-2 Fintikakis, H MB-5-8 Fioravanti, A WB-32-6 Firrone, C TC-4-18 Fischer, A ThB-34-3 Fischer, M WC-9-3 Fischer, T FC-8-9 Fisher, J ThA-15-5 Flegler, J WB-36-1 Fleming, D FA-15-7 Fondelli, T FB-6-6 fornarelli, F FA-36-6 Forrest, B MB-1-14 Forsman, S FC-1-3 Forsyth, P FA-9-4 Fortini, A FB-6-6 fortunato, B FB-4-1 Fournet, R ThC-38-2 Fowler, A FC-15-4 Fraczek, D ThB-15-6 Franceschini, G MA-27-1 Franchini, F TA-38-7 Francioso, L TC-17-2 Frank, D MB-40-3 Franke, M TA-32-1 Fransson, T WC-1-8 Frantzis, C FC-34-6 Franz, H FA-36-6 Freed, D FB Freygang, U MB Fridh, J ThB-9-1 Friedrichs, J WB-31-3 Frilli, A FB Fröhlich, J FB Frolov, B FC-34-6 Fruth, F MA-27-1 Fu, L WA Fu, W FB-4-1 Fu, Y MA-38-4 Fu, Y ThB-19-3 Fu, Z TA Fuhrer, C ThC-8-6 Fujii, K MA-18-1 Fujii, T ThC-44-7 Fujisawa, N ThC-4-27 Funke, H TB-16-3 Furlani, L ThC-44-7 Furukawa, M TA Furusawa, T FB-23-5 FURUTANI, H FC-8-9 Fusaro, F FB Gadala, M ThB-34-3 Gadda, A ThC-17-3 Gadiraju, S WC-25-2 Gaetani, P TB-4-6 Gaissinski, I ThC-3-8 Galgani, G FC-1-3 Galoul, V FC-34-6 Galpin, P WC-9-3 Gamil, A ThB Gan, J FB-26-5 Gan, X ThC-4-24 Gangopadhyay, T ThB-15-6 Ganin, L FA-15-7 Ganine, V WB-15-1 Gao, F TB-28-2 Gao, J WA Gao, J FB-37-4 Gao, L TC-42-5 Gao, R TB-30-3 Gao, S TA-11-5 Gao, T TA-4-13 Gao, X ThC-17-3 Gao, X ThC-39-9 Garai, A ThC-24-2 Garcia, D ThB-15-6 Garcia, J WB-1-6 García Rosa, N TA-1-11 Garmendia, I ThB-45-7 Garnier, F TC-13-7 Garrett, C TC-15-2 Gasnier, T TA-4-13 Gassner, M WB-32-6 Gastaldi, C WB-26-1 Gatti, G TC-39-2 Gaun, L ThB-4-26 gauthier, P ThA-38-8 Gautier, S WC-4-19 Ge, B ThA-38-8 Ge, Q WC-32-9 Gebalski, P WC-4-16 Geigle, K ThB-34-3 Geist, S MB-4-25 Geng, W FC Genrup, M TB-28-2 George, T MB-45-4 Geraci, G WC-17-1 Gerendas, M FC-15-4 Gezer, K FC-34-6 Gezork, T TB-38-3 Ghaffari, P ThC-23-3 Ghalamchi, B FA-37-3 Ghazanfari, B WA-46-6 Ghoneim, Z WB-4-17 Ghoniem, A FA-6-5 Ghosh, P ThC-4-24 Giacomazzi, E FC-15-4 Giametta, A FB-15-8 Gibson, J FA-11-4 Gicquel, L FC-34-6 Giersch, T ThB-9-1 Giesecke, D FC-1-3 Gillespie, D TB-3-2 Ginestra, C WA-6-2 Giorgetti, S WB-38-6 Giovannini, M FA-5-10 Giuliani, F ThA-16-2 Giuntini, S FB-4-1 Glaude, P FC-34-6 Godin, P FA-2-2 Godines, C FC Goenaga, F ThC-17-3 Goevert, S WB-37-7 Goinis, G WB-32-6 Gola, M MB-30-1 Golebiowski, M TA-32-1 Golinval, J TC-39-2 Goller, M ThC-17-3 Gomez Ramirez, D FA-2-2 Gonczy, S MB-40-3 Gong, J TC-17-2 Gonzalez, A WC-38-1 Gonzalez, E WC-5-7 GONZALEZ CUADRADO, D ThA-38-8 Gonzalez-Martino, I FB-42-2 Gooding, W ThC-45-8 Goriachkin, E TB-39-4 Gorshkov, A MA-27-1 Gorte, D TB-4-6 Goss, C TB-4-6 Goss, L FA-37-3 Gostelow, J TB-37-1 Goswami, S TB-25-1 Gotelip Correa Veloso, T ThC-4-24 Gotoda, H MA-41-1 Göttlich, E FC Gou, J TB-4-2 Gounder, J WA-37-8 Gourdain, N TB-37-1 MB-21-1 ThC-3-8 TB-4-6 FC-31-9 MB-40-3 WC-13-3 MB-37-2 ThA-15-5 WB-28-3 FC-31-9 ThC-4-27 WC-31-2 TC-32-8 ThB-9-1 TA-4-14 ThC-8-6 MB-5-8 TC-4-28 ThB-7-3 ThB-7-3 MB-1-14 MA-37-5 TA TB-32-3 FA-5-10 TA-10-1 ThC-44-9 WA-32-7 WC-25-2 TA-38-7 TA-4-13 FB-18-2 MA-37-5 ThB-8-8 TA MA-18-1 MA-18-1 WC-39-6 TA FC-19-6 MA-5-3 ThA-28-4 TA-32-1 TB-19-2 FA-9-4 WC-31-2 FB FA-3-4 ThB-2-1 TC-32-8 FA-4-9 ThB-8-8 MB-21-1 WB-11-2 MB-20-3 FA-37-9 FC-45-1 MB-23-9 MB-40-3 MB-37-2 TB-26-3 MB-1-14 TA-21-2 WA-4-33 FB-23-5 TB-4-2 ThC-1-5 TC-42-5 FA-19-5 WB-4-20 ThB-2-1 TC-5-4 MB-23-9 ThB-4-30 ThB-42-7 TC-21-4 ThC-1-5 MB-4-12 Govardhan, M Graichen, A Grassi, G Gray, J Green, I Green, J Greiner, N Greitzer, E Gresham, T Greving, D Griebel, C Griebel, P Grieco, J Griffiths, J Grilliat, J Grimm, F Grimm, F Grimshaw, S Grohmann, J Grönman, A Grönman, K Grönstedt, T Grothe, P Gruebel, M Gruin, M Gryllias, K Gu, C Gu, C Guardino, C Guardone, A Guendogdu, Y Guethe, F Guijarro Valencia, A Guinet, C Gülen, S Gungor, A Guo, H Guo, W GUOCHEN, Z Gupta, M Gurram, N Gursoy, G Gustafsson, D Gutierrez Salas, M Gutmark, E Gyuro, M Ha, K Habermann, J Habisreuther, P Hackemann, S Hackenberg, D Hackney, R Hada, S Haehnle, H Hagari, T Haglind, F Hah, C Hajikolaei, K Hajilouy-Benisi, A Halcoussis, A Hall, D Haller, B Halstead, D Hamed, A Hammer, K Hampel, B Hamza, M Hamzehlouia, S Han, G Han, J Han, X Han, Z Hanachi, H Hanna, D Hansford, S Hardin, J Hardwick, N Hargreaves, D Harper, J 152 ASME 2016 TURBO EXPO

153 Author Index TC-13-7 FB-42-2 TC-1-9 FA-5-10 MB-32-5 ThA-22-2 TC-4-28 FB-4-23 WC-4-16 WC-25-2 ThC-16-1 MB-37-2 FC-34-6 MB-26-8 FB-23-5 ThC-4-24 FA-4-9 WC-19-1 ThC-44-9 MA-26-7 WA-26-6 TA-30-4 ThA-12-4 TC-42-5 WA-41-2 WC-25-2 TC-23-7 FC-45-1 MB-45-4 TC-1-9 MA-37-5 FC-34-6 WC-5-7 MB-32-5 TC-4-18 ThB-42-7 WB-4-17 FB-26-5 ThC-1-5 ThA-22-2 TA-38-7 WA-6-2 FA-5-10 ThB-34-3 WA-32-7 MB-13-1 TB-36-4 ThA-26-4 WA WC-4-19 TC-4-28 FC-13-6 FC-6-7 FA-37-3 WA-4-33 TC-17-2 TB-23-6 TC-7-1 ThC-1-5 FB-15-8 ThB-42-7 FA-23-4 FA-19-5 TC-15-2 ThC-34-1 TC-46-2 ThC-23-3 FA-4-9 WC-4-16 TC-23-7 MB-45-4 TA-10-1 MB MB-21-1 ThC-1-5 WC-45-6 ThB-2-1 ThA-34-2 ThA-4-7 Harrington, J Harrison, H Hartley, T Hartmann, U Hartung, D Harvey, A Haseman, J Hassa, C Hassanaly, M Hasselmann, K Haucke, F Haug, J Hauptmann, T Havakechian, S Hayakawa, A Hayashi, K Hayashi, S Haydt, S He, C he, J He, K He, L He, L He, X He, Y Head, A Heckel, C Hecker, S Hedlund, L Heidebrecht, A Heinichen, F Heinrich, C Heinze, J Heinze, T Heitmeir, F Helm, M Hemchandra, S Hemsley, P Hendrick, P Hendry, M Henke, M Henke, M Hennecke, C Hennings, H Henson, J Henze, M Heo, J Herard, J Herbst, F Hermann, J Hernandez, F Herrmann, M Herrmann, S Hertel, C Hertweck, M Herve, R Heuer, T Hewkin-Smith, M Hibberd, S Hiester, P Hildebrandt, A Hildebrandt, T Hilgert, J Hills, N Himeno, T Himri, A Hinnant, K Hiroi, T Hirsch, C Hirsch, P Hjalmarsson, C Ho, K Hodson, H Hoebel, M Hoefler, C Hoenen, H Hoenig, S Hofer, D Hoferichter, V MB Hoffmann, J ThB-2-1 Hofmann, S WA-26-6 Hogg, S WC-45-6 Högner, L TA-6-1 Hohloch, M FB-42-2 Hohlweg, W MA-5-3 Holcomb, C WB-28-3 Holdsworth, S MB-5-8 Hölle, M ThC-13-2 Hollingsworth, K MB-37-2 Holmes, B FB-46-4 Holst, D TB-28-2 Holycross, C FB-34-4 Holzinger, F TC-31-1 Honavara Prasad, S TA-28-1 Hong, H TA-30-4 Hong, J WB-4-17 Hong, S FA-36-6 Hooman, K FA Hoopes, K TB-23-6 Hopfinger, M ThC-4-27 Horikawa, A ThA-1-10 Hornung, M WC-45-6 Hösgen, C TC-13-7 Hossain, J FB-46-4 Hossam El-Din, A MB-40-3 Hou, C ThC-17-3 Houzeaux, G TC-23-7 Hu, B WB-4-11 Hu, C FA-2-2 Hu, D MB-23-9 Hu, L MB-30-1 Hu, L ThC-39-9 Hu, S FB-37-4 Hu, X MA-26-7 Hu, Z FB-4-1 Huang, H MA-4-5 Huang, M TC-39-2 Huang, M TC-42-5 Huang, Q FB-1-1 Huang, W TB-44-4 Huang, X FA-36-6 Huang, Y MB-36-2 Huang, Z TA-6-1 Huber, A ThB-26-9 Hughes, F TB-25-1 Huh, K WB-4-20 Hui, X ThB-34-3 Humber, W MA-4-21 Hummel, T TC-42-5 Hunziker, R ThA-24-5 huo, C FA-26-2 Huo, W MA-37-5 Hupfer, A FB-41-3 Hurfar, C FC-1-3 Hutchinson, J ThC-44-7 Hwang, D MA-27-1 Iaccarino, G WC-42-6 Ibaraki, S FB-23-5 Ichikawa, A ThC-44-7 Ikezu, S FB-23-5 Iki, N ThB Im, H TB-25-1 Imani, S WB-38-6 Infantino, D WB-20-5 Ingistov, S WA-26-6 Ingram, G WB-4-20 Innocenti, A ThA-16-2 Innocenti, L FB-23-5 Inoue, T ThC-17-3 Insinna, M MA-37-5 Inzenhofer, A ThC-1-5 Ippoliti, L FB-5-1 Ireland, P TB-21-8 Irwin, M ThC-34-1 Iseni, S WB-11-2 Ishida, K TB-26-3 Ishikawa, Y FC-31-9 Iucidiani, P ThB-8-8 Iwasaki, T TB-26-3 Iwasaki, Y ThB-7-3 Jaatinen-Värri, A WC-17-1 Jackowski, T FA Jacobi, S TC Jacobs, G TC-31-1 Jacobs, P WB-23-1 Jahn, I FA-3-4 Jakobs, T MB-37-2 Jalaly, R FB-42-2 James, D WB-4-11 Janczewski, J ThC-31-6 Jang, K TC-39-2 Janke, C TC-42-5 Japikse, D ThB-42-7 Jariwala, V ThA-39-7 Jasak, H FC-44-2 Jee, S ThB-11-3 Jefferson-Loveday, R ThB-4-26 Jella, S TB-4-2 Jeng, S FA-42-8 Jenny, P TB-30-3 Jeon, D ThC-44-7 jeon, S TB-30-3 Jeong, S FC-6-7 Jericha, H MB-5-8 Jeschke, P ThB-31-7 Jeung, S ThB-15-6 Jha, R ThA-38-8 ji, D FA-37-3 Ji, L MA-41-1 Ji, L FA-4-9 Ji, Y FB-4-1 Jia, Z WB-42-3 Jiang, C FB-29-1 Jiang, D MB-10-2 Jiang, H ThA-28-4 Jiang, J MA-21-3 Jiang, L WC-4-19 Jiang, N ThB-4-26 Jiang, X ThA-12-4 Jiang, Y FC-31-9 Jin, H FB-1-1 Jin, L ThB JIN, Y MB-23-9 Jing, L WC-22-1 Jing, X MB-32-5 Jingyao, D ThC-21-5 Jo, C MB-1-14 Johann, E TB-37-1 John, A FC-15-4 Johns, D ThC-20-6 Joly, C ThB-15-6 Jones, T FB-6-6 Jonshagen, K FC Joo, J WC-25-2 Joos, F TA-37-6 Jothiprasad, G ThA-4-3 Joumani, Y ThA-4-3 Jourdaine, P ThA-34-2 ju, H MA-27-1 Ju, Y WC-45-6 Ju, Y MA-18-1 JUN, L MB-32-5 Junfeng, X FC-44-2 JUNG, J WC-42-6 Jung, S FB-34-4 Jüngst, M WB-38-6 Junqiang, Z TB-44-4 Junxu, C ThC-4-24 Kabiraj, L WB-23-1 Kadosh, K MB-37-2 Kähler, C FC-6-7 Kahlert, S ThA-1-10 Kaiser, S ThC-1-5 Kakimpa, B ThA-4-7 Kalantari, A WB-6-3 Kalathakis, C FA-6-5 Kalfas, A ThC-8-6 Kalianpur, V WA-42-4 Kalitzin, G ThA-42-9 Kaluza, P WC-9-3 Kameier, F ThB-11-3 Kan, R TB-44-4 Kanameda, W MB-1-14 Kando, A ThC-21-5 Kaneko, H TB-32-3 Kaneko, Y WB-26-1 Kang, C WB-12-3 Kang, J WB-12-3 Kang, Y TB-3-2 Kannaiyan, K FC-13-6 Kannan, K MB-40-3 Kannan, K ThB-2-1 Kannan, M WB-28-3 Kantzos, P ThC-3-8 Kapat, J TB-39-4 Kapil, S MB-45-4 Karelin, D WB-32-6 Kari, L FC-45-1 Karl, A FC-13-6 Karlsson, M ThC-4-24 Karmakar, S FB-26-5 Karunakara, D TB-44-4 Kato, D ThB Katz, J WA-4-33 Kaufmann, J MA-38-4 Kavurmacioglu, L FA-37-3 Kawase, M ThC-4-27 Kazari, M ThB-34-3 Kazawa, J FC-1-3 KE, P ThB-2-1 Kedir, N ThC-17-3 Kedukodi, S TC-39-2 Kefalas, A ThC-4-27 Keinz, J WC Kelbassa, I FB-41-3 Keller, C TB-4-2 Keller, M ThC-23-3 Kelly, M FB-41-3 Kendall-Torry, C FB-37-4 Kern, F FB Kern, T FB-34-4 Kernilis, A FC Kerres, B FB-42-2 Key, N MB-37-2 Khaleghi, H TA-1-11 Khalid, S WB-23-1 KHALIL, K WC-4-16 Khandelwal, B WB-32-6 Kharyton, V FC-13-6 Khoshlessan, M WC-38-1 Kibsey, M ThA-34-2 Kielb, R ThC-44-7 Kim, C WC-31-2 Kim, C MB-20-3 Kim, D ThA-23-2 Kim, D ThC-21-5 Kim, D WB-44-5 Kim, D FA-43-1 Kim, H TB-20-4 Kim, H WA Kim, H ThC-38-2 Kim, I WA Kim, I FB-6-6 Kim, J MA-27-1 Kim, J TA-23-8 Kim, J TB-30-3 Kim, J ThC-38-2 Kim, J ThB-39-8 Kim, K WB-44-5 Kim, K WC-31-2 Kim, S FB-6-6 Kim, T WC-31-2 Kim, T FA-43-1 Kim, Y WA-46-6 Kim, Y WB-15-1 Kim, Y FINAL PROGRAM 153

154 Author Index WC-31-2 WB-36-1 TB-4-6 TA-4-14 FB-18-2 WC-44-3 TC-32-8 WC-13-3 FA-16-5 WB-4-17 MB-21-1 MA-4-21 ThA-20-7 ThA-39-7 MB-1-14 ThA-20-7 FB-42-2 TA-4-13 MB-40-3 WC-9-3 MB-4-12 MA-21-3 ThC-31-6 TA-38-7 WB-31-3 WC-38-1 WC-4-16 MA-41-1 MB-30-1 TC-32-8 FB-23-5 FC-15-4 ThA-23-2 ThB-2-1 MA-4-5 MB-26-8 FB ThA-4-7 MB-14-2 FB-46-4 ThC-17-3 WC-4-16 FA-3-4 WA-32-7 WB-11-2 MA-5-3 MA-38-4 WC-15-3 WC-4-16 WA ThC-39-9 FB-4-23 ThA-3-3 ThB-31-7 FB FA ThC-17-3 TC-7-1 TA-23-8 TC-24-1 TA-44-6 FA-37-3 FB-34-4 ThA-28-4 MB-1-14 WC-4-19 TC-23-7 FB-5-1 WA-37-8 MB-45-4 TC-17-2 ThC-44-9 WB-39-5 TB-42-1 ThC-4-27 MB-13-1 MB ThC-1-5 ThB-31-7 Kim, Y King, M King, R Kings, N Kinzburskiy, V Kirik, I Kirk, A Kirollos, B Kirsch, K Kirthy, S Kissel, H Klarmann, N Klassen, M Klaubert, D Klauke, T Klein, M Klein, P Klein, R Kleinclaus, C kleine Sextro, T Klingmann, J Klocke, F Klooster, D Kluge, T Kluitenberg, M Kluxen, R Knadler, M Knobloch, K Knopf, E Knowles, G Kobayashi, H Kocagul, M Koch, C Koch, D Koch, R Koch, S Kochurov, R Köhler, C Kohli, A Kohlrausch, C Kok, J Kolb, M Kolb, T Kolmakova, D Komiyama, M Kong, X Kong, X Kong, X Koo, H Köpplin, V Kopriva, J Kornegay, J Koroglu, B Korsukova, E Koschichow, D Kouda, K Koupper, C Koutsomichalis, A Koutsovasilis, P Koyyalamudi, V Kozhemyako, P Kozulovic, D Krack, M Kraemer, K Kraj, L Kraus, C Kraus, M KRAVCHENKO, I Krenz, I Kretinin, G Krewinkel, R Kriegseis, J Krivcov, A Krivitzky, E Kroniger, D Krueckels, J Krug, A Krug, M Kruisbrink, A WC-39-6 ThA-1-10 TB-32-3 FC WB-42-3 MA-27-1 ThC-4-27 FC-8-9 WB-31-3 TC-32-8 WB-1-6 TC-4-18 TB-39-4 MB-36-2 WB-11-2 TB-4-2 TB-39-4 MB-4-12 FB-23-5 MA-24-8 MA-11-1 WC-15-3 ThA-1-10 FB-6-6 FC-44-2 MB-1-14 TA-12-1 WC-17-1 WC-4-19 WA-10-3 MB-4-12 ThC-4-27 FB-26-5 TB-36-4 TB-4-2 FA-34-5 WA-16-4 ThA-26-4 ThA-42-9 ThC-23-3 MB-13-1 MB MB-4-12 MB-23-9 WA-3-1 MB-4-12 TA-6-1 ThB-42-7 FC-13-6 WA-4-22 ThA-23-2 TC-17-2 ThB-9-1 WC-5-7 TC-23-7 WC-5-7 WC-38-1 ThB-9-1 TB-38-3 TC-36-7 TB-4-2 WC-17-1 ThC-44-9 WB-36-1 MB-4-25 TC-4-28 ThC-13-2 WC-31-2 ThC-25-3 WB-36-1 MB-36-2 ThC-3-8 WC-4-16 WC-31-2 WC-44-3 ThC-34-1 WA MA-27-1 WB-12-3 Krumme, A Krupenich, I Kubitz, L Kubo, S Kuegeler, E Kuehhorn, A Kuhn, P Kujawski, H Kukla, S Kulesza, Z Kulkarni, D Kulkarni, R Kumar, K Kumar, P Kumar, S Kumaran, A Kumaran, S Kundu, A Kurata, O Kurz, R Kusterer, K Kutlu, B Kuz'michev, V Kwon, H Kwon, O Kyprianidis, K Lacaze, G LaChance, J Laera, D Lahbib, D Lal, M Lam, K Lamarque, F Lambruschini, F Lammel, O Lampart, P Lan, Y Lance, M Landgraf, C Landry, C Lange, E Lange, M Lantz, A Lao, D Laranci, P Larfeldt, J Larosa, L Larosiliere, L Laskowski, G Laster, W LaTray, N Lauer, M Laufer, W Lavagnoli, S Lavertu, T Lawrence, D Lazaro, B Lazzaretto, A Le Guyader, S Le Pierres, R Lecourt, R Ledezma, G Lee, B Lee, B Lee, C Lee, C Lee, C Lee, C Lee, D Lee, G LEE, J Lee, J Lee, J Lee, J Lee, J Lee, K Lee, K Lee, S Lee, S WC-4-19 Lee, T ThB-39-8 Lee, W TB-30-3 Lee, Y ThA-28-4 Lee, Y MB Leggett, J TA-1-11 Legrand, J WC-32-9 Legrand, M TA-23-8 Lehn, A FC-13-6 Lei, G WC-39-6 LEI, S WC-42-6 Lei, V MB-40-3 Lei, Z FB-34-4 Leichtfuss, S WB-28-3 Leidermark, D TC-45-2 Lejon, M TC-7-1 Lekas, T WB-4-11 Lellek, S FC-45-1 Lemu, H WB-4-20 Lengani, D MB-5-8 Lenzi, G TB-4-2 Leparoux, J MB Leroy, G ThA-3-3 Levy, Y FB-18-2 Lewis, L MB-13-1 Lewis, S ThA-26-4 LI, B TC-32-8 LI, C WC-39-6 Li, C MA-41-1 Li, D TC Li, D WB-20-5 Li, D ThA-26-4 Li, F WB-12-3 Li, G FB-29-1 Li, H FC-13-6 Li, H MB-26-8 Li, H TB-16-3 Li, H ThA-3-3 Li, H WC-39-6 Li, H FA-37-3 li, J FB-4-1 Li, J MB-10-2 Li, J TA-11-5 Li, J TB-4-2 Li, J WA-10-3 Li, J ThA-24-5 Li, K MA-11-1 Li, L TC-32-8 LI, L ThA Li, L MB-4-12 Li, M MB-10-2 Li, M ThA-26-4 Li, M WC-4-19 Li, M TB-30-3 Li, Q FB-37-4 Li, R FB-1-1 Li, S TB-42-1 Li, S TC-1-9 Li, S TC-5-4 Li, S ThB-4-26 Li, S ThB-4-26 Li, S FA-11-4 Li, W TA-5-6 Li, X TC-45-2 Li, X ThC-16-1 Li, X WB-39-5 Li, X WB-39-5 LI, X FC-19-6 Li, Y MB-45-4 Li, Y TA-5-6 Li, Y TB-28-2 Li, Y TC Li, Y TC-39-2 Li, Y ThB Li, Y MA-4-5 Li, Z MB-4-12 Li, Z TB-13-5 LI, Z ThB-19-3 Li, Z WC-22-1 Liang, C TA-30-4 ThC-13-2 TB-36-4 WC-4-19 TC-13-7 ThA-22-2 WA-41-2 FC-44-2 MA-37-5 MA-11-1 WA-41-2 FB-23-5 WB-4-17 TA WB-4-20 MB-30-1 TA-12-1 WA-16-4 ThB-19-3 TB-30-3 WC-39-6 FA-4-29 TA-12-1 ThB-19-3 ThC-25-3 WB-4-11 MB-26-8 WB-4-11 FA-36-6 WC-15-3 MB-36-2 MB-45-4 TC WA-10-3 WA-10-3 WA-42-4 WC-22-1 FB-1-1 FB-19-8 TA-10-1 TC-5-4 TC-32-8 TB-44-4 TC-13-7 TA-10-1 WB-37-7 FC WC-15-3 TC-45-2 WC-4-19 MA-41-1 MB TB-28-2 FA-4-9 FC-13-6 MA-26-7 MB-23-9 MB-32-5 TC-5-4 TC-5-4 ThA-16-2 ThB-4-26 WA-16-4 WC-15-3 FA-11-4 FB-1-1 MB-30-1 ThC-38-2 WA-12-2 WA WB-39-5 TA-30-4 MB-4-25 MB-37-2 FB-5-1 FB-15-8 FB ThC-24-2 FA-36-6 Liang, Z Liberatore, F Liese, E Lieuwen, T Ligrani, P Lim, S Limacher, P Lin, D Lin, F Lin, G Lin, K Lin, P Lin, S Lin, X Lin, Y Ling, J Ling, J Liou, T Little, Z Liu, B Liu, B Liu, C Liu, C Liu, C Liu, C Liu, C Liu, F Liu, F Liu, G Liu, G Liu, H Liu, H Liu, H Liu, H Liu, H Liu, H Liu, H Liu, J Liu, J Liu, J Liu, J Liu, J Liu, K Liu, K Liu, L Liu, L Liu, S Liu, S Liu, T Liu, W Liu, X Liu, X Liu, X Liu, Y Liu, Y Liu, Y Liu, Y Liu, Y Liu, Y Liu, Y Liu, Y Liu, Y LIU, Y Liu, Y Liu, Z LIU, Z Liu, Z Liu, Z Liu, Z Liu, Z LIU, Z Livermore-Hardy, R Ljung, A Lobo, B Loboda, I Lock, G Loehr, M Loes, M Loghin, A 154 ASME 2016 TURBO EXPO

155 Author Index WA-32-7 Lolis, P FA-37-9 Longley, J FB-18-2 Lopez Juste, G MB-4-25 Lörstad, D FB-42-2 Lou, F ThA-28-4 Lourerio Homs, J FA-9-4 Louw, F TC-21-4 Lowden, P TC Lu, B WB-1-6 Lu, G TC-3-5 Lu, H MB Lu, L TC-23-7 Lu, P WB-37-7 Lu, Q TC-42-5 Lu, X WA-3-1 Lu, X TB-44-4 Lu, Y ThB LU, Y WB-39-5 Lu, Y TB-20-4 Lu, Z WB-11-2 Luan, Y MA Lubell, D ThC-24-2 Lubomirsky, M MB-23-9 Lückmann, D FC-8-9 Lugo Leyte, R MB-26-8 Lugo-Leyte, R FC-8-9 Lugo-Méndez, H MB-1-14 Lundbladh, A ThC-24-2 Lunde, E MB-13-1 Lundgreen, R FA-23-4 Lunnan, K FC Luo, H TA-39-1 Luo, J TC-13-7 Luo, L WC-38-1 Luo, W FB-44-1 Lutum, E ThA-26-4 Lv, K WC-44-3 Lyko, C MB-13-1 Lynch, S MB-45-4 Ma, C TC Ma, C TB-13-5 Ma, H WA Ma, H MA-37-5 Ma, N ThB-39-8 Ma, S MB Ma, W WA-16-4 Ma, X FC-45-1 Ma, Y ThC-8-6 Macdonald, J WB-26-1 Maceli, N TC-1-9 MacManus, D ThC-39-9 Madavan, N WA-24-7 Madsen, S FB-18-2 Magerramova, L MB-4-25 Magni, F WA-6-2 Magnusson, J MA-4-21 Magri, L WC-22-1 Mahapatra, R ThC-17-3 Mahiques, E MA-5-3 mahmood, M WB-37-7 Mahmood, S WB-23-1 Mahmoud, S TA-23-8 Mahner, M ThC-34-1 Mailach, R ThB-2-1 Maillet, E WC-13-3 Malak, M ThC-23-3 Malkamäki, M ThB-34-3 Malzacher, L WA Mandrup-Poulsen, C ThB-34-3 Mangani, L ThB-15-6 Mann, A ThA-26-4 Mansour, M FA-2-2 Mansour, R ThB-34-3 Mantegazza, P TC-15-2 Mantero, M MA-38-4 MARAL, H ThA-26-4 Marcelet, M ThA-1-10 Marcellan, A WB-38-6 Marconcini, M ThA-3-3 MB-26-8 ThC-24-2 ThA-15-5 MA-21-3 TB-42-1 TC-7-1 TA-38-7 WC-15-3 WB-15-1 TC-32-8 FA-34-5 TC-46-2 TA-32-1 WA-32-7 FA-36-6 WA TB-25-1 MA-5-3 FB-5-1 TB-39-4 TC-15-2 ThB-8-8 ThB-9-1 TA-6-1 FA-11-4 TA-30-4 ThA-3-3 ThB-4-30 WC-1-8 WC-13-3 ThA-4-7 FB-23-5 ThC-44-7 MB-4-25 MB-4-25 WB-39-5 WC-22-1 ThA-39-7 FC-13-6 TC-13-7 TB-32-3 WC-9-3 FC-45-1 FA-26-2 TB-39-4 WC-4-19 WA-16-4 WC-13-3 FA-34-5 FC-34-6 FC-31-9 WA-4-22 MB-27-2 FB-44-1 WB-26-1 MB-26-8 WC-19-1 TA-4-13 ThA-28-4 ThA-4-7 FB-29-1 FC-1-3 FA-36-6 ThA-23-2 ThA-15-5 WA-4-22 ThB-2-1 FC TA-4-13 ThA-24-5 TC-4-28 FB-37-4 FC-34-6 WB-31-3 MB-20-3 FB-15-8 FB-26-5 MB-21-1 Marikkar, N Marinescu, G Marini, L Mariot, A Markovic, A Marlier, J Marn, A Marra, F Marra, J Marré Brunenghi, M Marrè-Brunenghi, M Martel, C Marten, D Mårtensson, H Martin, I Martin, S Martinez Esparza, L Martinez-Botas, R Martini, A Martseniuk, Y Marty, J Marxen, O Masada, J Masi, M Massardo, A Massini, D Massini, M Masunov, A Mathews, B Mathioudakis, K Mathison, R Matsumura, Y Matsunuma, T Matsuoka, A Matveev, S Matveev, S Matveev, V Matviienko, V Matzgeller, R Mau, C Maurer, M Maurin, A Mauß, M Mavris, D May Estebaranz, A Mayandi, B Mayhew, E Mayo, I Mayo, Jr., D Mayr, M Maywald, T Mazzali, C Mazzei, L Mazzola, M Mazzoni, C Mazzucco, M Mcbean, I McClintic, J McClung, A McClung, R McDonell, V McFarland, J McGilvray, M McGroddy, M McLorn, M McNally, J Meadows, J Mechnich, P Medic, G Meeuwissen, T Meher-Homji, C Meier, W Meile, W Meinl, F Meli, E Melino, F Memory, C Meng, L Meng, P ThB-19-3 Meng, T WB-28-3 Menon, M FB-4-23 Mensah, G WA-24-7 Mercangöz, M FA-9-4 Merlin, M ThC-25-3 Meroni, A ThC-31-6 Mertz, D ThA-3-3 Meskers, D WA-26-6 Messenger, A FB-42-2 Methel, J MB-5-8 Metzler, T FB-29-1 Meyer, M WC-5-7 Meyer, S WC-5-7 Meyer, T ThC-38-2 Miao, X ThC-34-1 Micallef, D WB-15-1 Michael, M WC-44-3 Michaelis, D MB Michelassi, V ThC-8-6 Micheli, M TC-15-2 Micio, M WA-21-9 Miglietti, W FC Mihaescu, M WB-26-1 Milcak, P WA-41-2 Mileshin, V ThB-7-3 Milic, S WC-32-9 Millecamps, A ThA-16-2 Miller, A TB-37-1 Miller, R FA-26-2 Millington, P MB-21-1 Mingareev, I TB-39-4 Minot, A ThB-4-26 Mira Martinez, D ThA-4-3 MIRAT, C TB-25-1 Mirmobin, P FB-19-8 Mirzamoghadam, A WA-42-4 Mishra, S ThC-4-24 Misra, A ThA-34-2 mitchell, B MA-32-2 Mitra, M TA Miyazawa, H FA-36-6 Modir Shanechi, M FB-4-23 Moeck, J MA-4-21 Moeck, J ThA-4-7 Mohammadzadeh Keleshtery, P TC-4-28 Mohammed, A TB-20-4 Mohan, A ThC-8-6 Mohr, F ThA-3-3 Molière, M FB-34-4 Möller, D ThA-4-3 Monaghan, R ThA-3-3 Monetti, B FA-16-5 Mongillo, D FB-4-1 Montagne, P ThB-36-8 Montero Carrero, J WA-6-2 Montero Carrero, M TB-37-1 Montgomery, M ThB-11-3 Montomoli, F FA-4-29 Monz, T ThA-28-4 Moody, J WC-13-3 Moon, H ThB-15-6 Moore, J FA-5-10 Moosbrugger, V ThA-38-8 Mora, A FC-34-6 Morales, J FC Moreau, S ThB-45-7 Moret, M FC-31-9 Morgan, N TB-32-3 Mori, K WA-24-7 Morin, F MA Morini, M ThB-5-11 Morioka, N ThA-24-5 Mormile, M ThC-20-6 Moroz, L WC-19-1 Morris, M WB-42-3 Morsbach, C ThB-2-1 Morscher, G ThC-1-5 Morvan, H FA-5-10 MB-23-9 ThB-45-7 WB-28-3 MA-24-8 MB-1-14 WB-4-11 FA-43-1 ThA-28-4 WC-4-16 ThC-4-24 ThC-39-9 TB-26-3 FA-3-4 FB-41-3 TC-24-1 TB-19-2 TB-38-3 WC-13-3 ThC-39-9 ThC-34-1 ThC-4-27 FC-15-4 MA-26-7 ThB-15-6 WC-9-3 FC-13-6 ThA-23-2 ThC-25-3 TB-21-8 WC-17-1 TC-13-7 MB-20-3 ThB-2-1 TA-37-6 FA-4-9 ThC-44-7 MA-37-5 WC-1-8 WC-1-8 FB-41-3 ThC-20-6 WC-45-6 FA-3-4 TC-17-2 MB-21-1 TC-46-2 MB-4-12 MA-18-1 ThC-23-3 MA-41-1 MB TB-25-1 ThA-6-4 WB-38-6 FC-1-3 WA-37-8 ThB-34-3 ThB-34-3 WC-22-1 WB-37-7 WC-13-3 WC-13-3 WA-10-3 TC-31-1 MB-30-1 MB-37-2 WA TB-6-11 MB-13-1 WB-37-7 MB-4-12 TC-45-2 FC-34-6 ThB-8-8 FC ThC-16-1 WB-20-5 WC-4-19 Moschini, S Moussavi Torshizi, S Moustapha, H Moverare, J Mrinal, K Mrugala, T Mu, Y Mudafort, R Mueller, F Mueller, M Mukhopadhyay, A Müller, C Müller, F Müller, T Mumcu, A Munari, E Munday, D Munoz, J Murata, A Murman, S Murooka, T Murota, T Murthy, S Musch, C Musgrove, G Na, G Nadali Najafabadi, H Nagorski, M Nagy, A Nagy, D Nahang-Toudeshki, S Nakamata, C Nakamura, R Nakamura, T Nakano, T Nakasu, T Nakayama, K Nan, X Nanjundaiah, V Nanshu, C Naqavi, I Nassar, A Nasuf, A Natali, S Natsui, G Navrotsky, V Nayeri, C Nazukin, V Neely, A Nerg, J Neuhaus, L Newman, D Newton, P Newton, P Ng, H Ng, W Ngo Boum, G Ni, M Ni, R Ni, Y Nicke, E Nickol, J Nicolas, X Nicoud, F Nie, C Niedermeyer, A Niehuis, R Nielsen, K Nikolaidis, T Nikparto, A Nili-Ahamadabadi, M Nilsson, E Ning, T Nipkau, J Nishimura, Y Nita, K Nitsche, W Niu, X Noble, D FINAL PROGRAM 155

156 Author Index WB-31-3 ThC-4-24 TA-4-14 TC-15-2 FA-37-3 MB-30-1 ThC-45-8 WC-42-6 MB-1-14 TA-32-1 FA-37-3 TC-4-18 MB-37-2 WC-22-1 ThB-4-30 WB-11-2 ThC-45-8 ThA-28-4 TA-12-1 FA TA-4-14 TB-44-4 ThC-4-27 MA-18-1 FC ThC-4-27 WC-13-3 TC-4-28 ThC-44-9 ThB-34-3 TA TC-23-7 MB-20-3 MB-4-25 MB-45-4 MB-1-14 WA-4-22 TC-17-2 FB-37-4 MB-45-4 MB MA-27-1 FC TC-4-28 ThA-3-3 ThB-15-6 TC-15-2 MA-18-1 FC-15-4 MA-21-3 WB-26-1 FA-6-5 MB-40-3 ThC-4-24 TB-16-3 TA-28-1 TA-5-6 ThA-24-5 ThB-31-7 TB-44-4 ThA-28-4 WB-20-5 ThA-38-8 WB-31-3 TC-24-1 ThC-17-3 WC-5-7 WC-45-6 WA-41-2 MB-32-5 FA-3-4 WA-16-4 WB-26-1 TC-13-7 WA-6-2 ThC-25-3 TC-31-1 ThC-44-7 WC-31-2 Nocciolini, D Noiray, N Noll, B Noor Mohamed, S Noorsalehi, M Norrbin, C Novikova, Y Numakura, R Nyatando, D Nyssen, F Obaida, H Oberleithner, K O'Brien, W Ocheretianyi, V O'Connor, J Oda, Y Odabaee, M Oechsner, M Oefelein, J Ogata, T Ohno, D Ohta, Y Okada, K Okada, M Okamoto, K Okazaki, T Okita, Y O'Loughlin, W Onori, M Ooten, M Ooyama, H Opferkuch, F Orlandini, V Orlov, M Ornano, F Ornat, A Orsino, S Orth, U Ortolan, A Otryahina, K Ottavy, X Otto, D Ouchi, T Oumejjoud, K Ovcharenko, V Owen, A Owen, J Ozeki, T Ozmusul, M Ozturk, U Pacak, A Pachidis, V Page, G Pagliaroli, T Pagnacco, F Pakhomenkov, A Palazzolo, A Palella, M Paleo Cageao, P Pallot, G Palmert, F Pan, X Pan, Y Panconi, S Pandit, R Panek, L Paniagua, G Panizza, A Pankov, S Panning-von Scheidt, L Pantaleo, A Pappa, A Paradiso, B Parbat, S Parente, A Park, B Park, J Park, J Park, J WC-31-2 WC-38-1 MB-40-3 ThC-4-27 WB-36-1 MA-4-21 WC-25-2 FA ThB-45-7 ThB-26-9 FC-1-3 ThC-38-2 ThC-13-2 ThB-26-9 WA-4-22 FB-15-8 MA-21-3 WB-15-1 ThC-31-6 FA-4-29 WB-11-2 MA-46-9 FC-13-6 ThC-16-1 ThB-15-6 TC-24-1 WC-42-6 TC-1-9 TB-4-2 TB-25-1 MB-30-1 MB-13-1 MB-27-2 MB-20-3 FA-23-4 ThA-38-8 ThB-45-7 WB-26-1 MB-32-5 WC-17-1 TA-38-7 TB-42-1 ThB-15-6 TA-4-14 WB-42-3 ThA-16-2 ThA-6-4 TA MB-32-5 ThB-7-3 TC-1-9 TB-32-3 MB TC-3-5 MB-30-1 ThB-45-7 ThC-1-5 ThC-23-3 TC-17-2 ThC-39-9 MB-20-3 WC-32-9 ThB-11-3 TC-17-2 TB-20-4 WA-24-7 WB-26-1 FA-9-4 FA-26-2 WC-25-2 FC-8-9 FC-8-9 MB-23-9 MB-4-25 TC-15-2 ThC-23-3 FC-6-7 FC-8-9 FA-5-10 Park, M Parra, J Parry, A parsania, N Pasch, J Paschereit, C Passmann, M Passmore, K Pastor, G Patel, G Patel, H Patel, K Patel, R Patel, Y Patil, S Patinios, M Patnaik, P Patrone, S Pavelek, D Paxton, B Pearce, R Pechlivanoglou, G Peet, Y Peitsch, D Pekris, M Pelella, M Pelton, R Pelz, P Penanhoat, O Peng, J Pennacchi, P Perdichizzi, A Pereboom, H Peretto, A perrone, A Persico, G Persky, R PERUZZI, L Pesaresi, L Peschiulli, A Pescini, E Pesiridis, A Peter, M Peterleithner, J Peters, A Peterson, B Petit, O Petrie Repar, P Petrov, E Petrovic, M Pfeiffer, G Philippe, J Philit, M Phillips, J Phillips, S Phutthavong, P Piazera de Carvalho, T Picard, M Picchi, A Pichler, R Pierobon, L Pierre, C Pietropaoli, M Pilgrim, C Pilidis, P Pillay, T Pinelli, L Pinelli, M Ping, Y Pini, M Piola, S Pirotta, M Pischinger, S Piskin, A Pitz, D Plante, J Platzer, M Plunkett, J Pluymers, B MA-24-8 Poerner, M WB-28-3 Poggio, E FB-18-2 Pohl, J WC-44-3 Pohorelsky, L WC-4-19 Poinsot, T MA-4-5 Polanka, M MA-4-21 Polifke, W MA-26-7 Polklas, T WA-32-7 Popov, G ThA-6-4 Porumbel, I WC-13-3 Povey, T FC-15-4 Prabhudharwadkar, D FB-15-8 Praisner, T WC-15-3 Prakash, C TA-11-5 Prenter, R FA-2-2 Presby, M MB Priebe, S WC-4-19 Prieur, K TA-37-6 Pritchard, B MA-11-1 Properzi, E ThB Pschernig, M WC-19-1 Pu, J FC-31-9 Pugachev, A WA-4-22 Puggelli, S WB-31-3 Pugi, L MB Pullan, G MB-26-8 Pusch, D FA-36-6 Qi, J WC-42-6 QI, M WB-23-1 Qi, W WA-29-2 Qian, P ThB QIAN, Y ThA Qiang, X MA-41-1 Qiao, W WB-4-20 Qin, H ThA-16-2 Qin, J TC-31-1 Qin, K TB-37-1 Qin, N WC-45-6 Qin, R ThA Qin, Y TC-5-4 Qingcai, Y WC-1-8 Qingxi, L TB-42-1 Qiu, D MA-9-2 QU, X WB-36-1 Ra, H FB Raab, I ThA-15-5 Raben, M MB-1-14 Rae, A WB-23-1 Rahbar, K FC-15-4 Rai, A WC-1-8 Rajeevalochanam, P WC-42-6 Rajoo, S TB-23-6 Rakut, C WC-4-16 Raman, V WA-4-22 Rankin, B ThA-16-2 Rao, Y FA-23-4 Ratto, L ThA-12-4 Ravelli, S ThA-16-2 Ravi, B FA-36-6 Reddell, T TC-4-28 Reddy, D FB-18-2 Reddy, V TB-26-3 Rehnsch, A TB-4-6 Reichel, T WC-25-2 Reinker, F FA-5-10 Reiss, H TA-37-6 Reitz, G MB-10-2 Ren, J ThA-34-2 Ren, W TA-10-1 Ren, X TB-28-2 Ren, Y TC-13-7 Ren, Z MB-27-2 Rendu, Q FB Ressing, H TC-32-8 Retze, D WB-12-3 Rhee, D WC-19-1 Riahi, A FA-23-4 ricci, G TB-26-3 Rice, T ThC-17-3 MB-21-1 TA-4-14 TC-24-1 TB-3-2 TB-3-2 MB-40-3 TA-23-8 MB-27-2 WB-31-3 FA-3-4 ThA-28-4 FB WC-1-8 TC-4-28 WC-22-1 WB-4-20 FB-15-8 FB-6-6 TB-25-1 WB-36-1 FC-44-2 WC-4-19 MB-21-1 FC-44-2 TC-23-7 TB-25-1 ThC-13-2 FA-4-9 WB-36-1 ThA-3-3 ThA-6-4 ThB-34-3 ThC-3-8 WB-11-2 WA-4-33 WB-4-20 MB-4-12 FA-37-3 TC-15-2 FC-45-1 TB-25-1 FB FA MA-27-1 ThB-8-8 WA-41-2 WB-31-3 WC-1-8 WC-4-19 WB-23-1 WA-29-2 WB-15-1 WC-4-19 MB-27-2 WB-42-3 WB-26-1 TC-24-1 WC-9-3 WC-4-16 FC-8-9 TA-12-1 ThB-4-30 MA-4-21 TC-42-5 WC-4-16 WB-23-1 ThA-3-3 WC-13-3 MB-21-1 ThA-1-10 MA TB-32-3 TA-21-2 WB-4-11 WC-5-7 MB-13-1 FA-4-9 TB-3-2 Richard, S Richardson, M Richecoeur, F Ridens, B Riebl, S Riedel, U Rife, M Rimpel, A Rinderknecht, S Rindi, A Rispoli, F Riva, A Rixen, D Riziotis, V Rizkalla, H Riznyk, S Rizzo, S Robak, C Roberts, R Robertson, M Rochau, G Rochhausen, S Rock, N Rodermann, M Rodriguez, J Rodriguez Erdmenger, R Rodriguez Sotomonte, C Rogers, N Rogerson, J Roh, C Roizman, A Rolt, A Romanelli, G Romano, C Romero, E Romero, P Romoli, F Romoser, C Rona, A Ronconi, E Roos, D Rosa do Nascimento, M Rose, M Rosic, B Rossetti, F Rossetti, N Rossikhin, A Rossin, S Roumeliotis, I Rouwenhorst, D Rowlands, A Rowlinson, G Roy, R Roy, S Rozenberg, Y Rube, C Rubechini, F Rubino, D Rudersdorf, M Rudolf, C Rufli, P Ruiz, A Rukes, L Runte, T Rusch, D Ruslan, M Russell, H Russell, R Rutledge, J Ryan, P Rybakov, V Ryu, K Rzadkowski, R Saadat, M Saanum, I Saavedra, J Sacco, C Sadasivuni, S Sadr, R 156 ASME 2016 TURBO EXPO

157 Author Index FC-45-1 TC-45-2 TC-17-2 WC-1-8 TB-21-8 WC-13-3 ThC-44-7 FA-4-9 ThC-8-6 WC-42-6 FA-37-9 TB-39-4 FC-8-9 MB-26-8 MB-32-5 ThC-17-3 MA-11-1 MA-24-8 MA FC ThB-2-1 MB FC-45-1 FB-15-8 FA-3-4 WB-15-1 MA FC-6-7 MB-13-1 TA MA-24-8 FA-23-4 MA-4-21 TC-4-18 ThB-45-7 ThB-45-7 TC-17-2 MA-46-9 WB-20-5 TA-44-6 WB-15-1 FA-3-4 TC-32-8 FA-19-5 TA-37-6 ThA-23-2 WB-42-3 TC-4-18 MB TB-4-6 TB-26-3 TA-21-2 FA-19-5 ThA-42-9 ThB-42-7 TB-23-6 ThC-8-6 FA-34-5 TA-37-6 TC-4-18 ThC-4-27 MB FB-29-1 ThC-45-8 ThB-9-1 ThA-6-4 MB-37-2 FB-4-23 FA-37-3 TA-44-6 WC-39-6 MB-13-1 TA-44-6 WB-4-11 TC-7-1 WA-37-8 FB FB-6-6 TB-19-2 Safari, A Safari, M Saggese, R Sahadevan, S Sahoo, P Saito, H Saito, S Saitoh, T Sakagami, N Sakaguchi, D Sakuma, Y Salah El Din, I Salazar Pereyra, M Salazar-Pereyra, M Salles, L Salvadori, S Salvagni, A Samad, A San Andres, L Sanada, H Sanchez, L Sandberg, R Sands, J Sangan, C Sänger, A Santolini, B Santos, I Sanz, W Saracoglu, B Sasao, Y Sassanelli, G Satta, F Sattelmayer, T Saurabh, A Sauret, E Savaria, C Savary, N Saverin, J Savic, S Savin, N Savov, S Savuto, E Sawicki, J Saxena, R Saxena, S Sayma, A Scarbolo, L Scarpato, A Schädler, R Schaepel, J Schatz, M Schaudinn, M Schiffer, H Schiffman, J Schilling, F Schinnerl, M Schirmeister, U Schitter, C Schlange, S Schlüssler, R Schmalhofer, C Schmid, G Schmidt, R Schmidt, T Schmitz, M Schmitz, O Schneck, III, W Schneider, D Schneider, T Schnell, R Schnoes, M Schobeiri, M Schoenweitz, D Schönborn, A Schönleitner, F Schreiber, J Schrey, A Schroder, A Schroeder, R WC-5-7 FB MA-4-21 WC-4-19 WC-17-1 FB MA-4-21 MB-26-8 MB-21-1 ThA-42-9 FA-4-29 ThB-42-7 TA-23-8 MB-21-1 MB-32-5 WB-44-5 MB-4-25 FB-15-8 TB-28-2 MA-24-8 TA-4-14 WA-26-6 ThA-34-2 TB-39-4 FB MA-21-3 ThA-1-10 WC-4-19 FB-34-4 MB-23-9 MB-1-14 FC-19-6 FA-34-5 WC-4-19 FB-18-2 ThC-4-24 ThC-4-24 MA-38-4 ThC-4-24 ThA-26-4 TC-21-4 TC-7-1 MA-24-8 FC-15-4 TA-1-11 WC-1-8 FA-5-10 ThB-15-6 FB-4-1 FB-26-5 MB WB-39-5 TC-1-9 TA-10-1 WB-37-7 WB-4-17 ThC-16-1 MA-18-1 MB-27-2 FA-4-9 FA-15-7 MB-36-2 TB-30-3 WC-1-8 FC FB-1-1 TC-7-1 FC-8-9 WA-42-4 TB-28-2 FA-2-2 TB-26-3 ThA-3-3 MB-10-2 TB-23-6 ThB-2-1 FA-19-5 TB-26-3 WC-22-1 Schroll, M Schuerhoff, J Schuermans, B Schuller, T Schulz, A Schulze, C Schulze, M Schumacher, D Schurb, J Schwarz, P Schwärzle, A Schweigler, C Schweizer, B Schwerdtfeger, J Schwingshackl, C Scillitoe, A Sciolti, A Scobie, J Scott-Emuakpor, O Scotti Del Greco, A Scouflaire, P Seaton, J Seeley, C Seepana Venkata, R Segletes, D Seimann, M Seitz, A Seitzman, J Seive, M Selamet, A Selezneff, D Self, K Selic, T Selle, L Selvam, K Sen, S Sen, U Senel, C Sengupta, P Senoo, S Seok-Jo, Y Sequeira, C Serena, A Sertcakan, M Sethi, V Settisara Janney, K Seume, J Sevincer, E Sforzo, B Sgambati, A Shabbir, A Shabliy, L Shah, P Shahpar, S Shahsavari, A Shanbhogue, S shang, C Shankar, K SHAO, H Shao, W SHAO, W Shao, W Shao, X Sharma, N Sharma, O Sheaf, C Sheard, A Shelton, W Shen, F Shen, M Shen, X Sheng, S Sherbaum, V Shi, B Shi, X Shi, Y Shiau, C Shibukawa, N Shifler, D FA-4-29 TA-21-2 WB-36-1 TC FA-36-6 MB-20-3 ThB-2-1 WB-39-5 TB-20-4 WA-32-7 MB-45-4 FA ThA-26-4 WB-38-6 WB-39-5 TC-17-2 WB-37-7 MA-24-8 TC-1-9 ThB-4-30 WA-37-8 MB-21-1 TB-26-3 MB-27-2 ThC-23-3 FA-5-10 FC-8-9 MA-4-21 MB-1-14 MB-20-3 TA ThC-1-5 ThA-26-4 FA-11-4 TA-38-7 MB-4-12 TC-24-1 ThA-28-4 ThC-24-2 WC-5-7 FA-26-2 ThA-16-2 FA-9-4 TA-37-6 ThC-25-3 ThA-23-2 MA-32-2 FB-41-3 WC-42-6 FB-4-1 WA-42-4 TC-13-7 ThA-28-4 WC-38-1 WC-1-8 FB-1-1 TB-19-2 TA-28-1 MB-27-2 ThC-23-3 FB-1-1 FB-18-2 ThC-34-1 WC-4-19 ThA-42-9 FA-16-5 ThC-8-6 FB-29-1 ThB-19-3 ThA-3-3 MB-1-14 WC-13-3 WB-44-5 MB-32-5 FB-19-8 MB-27-2 FA-2-2 MB-30-1 WC-25-2 Shih, H Shin, D Shin, H Shin, S Shin, Y Shinano, Y Shinohara, K Shirani, E Shixi, M Shklovets, A Shmotin, Y Shoyama, T Shu, W Shuang, S Shumal, M Shunn, L Siddappaji, K Siddique, M Sieber, J Sieber, M Siemann, J Sierra, P Sigg, R Signori, A Sikanen, E Silbergasser, A Silingardi, A Silva, C Silva, D Sim, K Simens, M Simmons, K Simon, A Simon, T Simoni, D Simons, D Simons, S Simonsson, K Singh, A Singh, D Singh, G Singh, P Singh, R Singh, R Singh, R Singh, V Sinha, A Sinha, N Sirakov, B Sirjean, B Sishtla, V Siw, S Sjodin, B Sjolander, S Slaboch, P Slaby, M Slavens, T Slobodskoy, D Smeulers, J Smirnov, A Smith, A Smith, E Smith, N Smith, T Smythe, C Snyder, J So, B Sobotka, J Socotch, A Sokolov, D Soldevilla, N Sommerer, Y Son, C Song, G Song, H Song, H Song, J Song, J Song, J ThA-26-4 Song, L ThA-24-5 song, P MB-30-1 Song, S WA Song, T ThA Song, Y TA-21-2 Sopka, J ThC-8-6 Sorato, S MA-27-1 Spagnolo, M TC-1-9 Spakovszky, Z TC-24-1 Spina, P WC-25-2 Spinelli, A FC-6-7 Spliethoff, H WC-9-3 Springer, N WC-5-7 Sridhar, V ThB-21-7 Srinivasan, D ThC-17-3 Srinivasan, R FB-42-2 Srivastava, R MB-36-2 Srivatsa, S ThA Staats, M MB-23-9 Stadermann, M ThB-9-1 Stadler, M FC Staffelbach, G MB-10-2 Staggs, J TC-1-9 Stankowski, T TA-44-6 Stapelfeldt, S ThB-9-1 Stark, U ThB-26-9 Starzmann, J WB-26-1 Stastny, M TB-4-6 Stathopoulos, P ThA-23-2 Staudacher, S WA-24-7 Stefani, A MB-23-9 Steiger, M MB-26-8 Stein, P WB-4-17 Steinbacher, T ThA Steinberg, S ThC-4-24 Steinert, R WB-36-1 Stepanek, J FB Stephan, I WC-1-8 Stephens, D FA-16-5 Stimpson, C WC-5-7 Stockhausen, G FB-37-4 Stoessel, M MB-1-14 Stokes, M FB Stotz, S WA-4-22 Stouffer, S FB-1-1 Stowe, R FB Strauch, M WB-4-17 Strobio Chen, L ThC-17-3 Studerus, A FA-5-10 Stuetz, M MB-1-14 Sturm, W TC-4-28 Stuttaford, P MB-40-3 Su, S FC Su, X MB-4-12 Subash, A ThB-8-8 Sugawara, T MA-11-1 Sugimoto, T FC-6-7 Suleiman, S ThB-36-8 Sullivan, S ThA-4-7 Sullivan-Lewis, E MA-14-3 Sultanian, B FA-9-4 Suman, A MB-23-9 Sun, H WB-11-2 Sun, H ThA-24-5 sun, J WB-1-6 Sun, L WC-22-1 Sun, P FA-26-2 Sun, Q WB-1-6 Sun, T TA-4-13 Sun, W ThB Sun, X TC-15-2 Sun, Z ThC-38-2 Sun, Z TC-13-7 Sunden, B FC Sundström, E WB-4-20 Sung, C TC-17-2 Sung, Y TB-39-4 Sunkara, S FA-34-5 Surwilo, J FINAL PROGRAM 157

158 Author Index TB-20-4 Suryan, A FA Svendsen, P WC-31-2 Swanson, E ThC-13-2 Sweeney, B TB-32-3 Szczepanik, R TA-37-6 Szucs, P TC Szwedowicz, J FA-34-5 Szymaniak, M ThC-4-24 Tachibana, S ThB-8-8 Tada, K ThA-24-5 Taher, M MA-18-1 Takahashi, T ThB-8-8 Takata, K WB-11-2 Takeishi, K FC-13-6 Talnikar, C TC-42-5 Tamaki, H TC-4-28 Tambe, S ThC-44-7 Tamura, Y MB-37-2 Tan, C ThB Tan, D MA-37-5 Tan, F ThB-11-3 Tan, R TA-32-1 Tan, Y MA-11-1 Tanaka, R MB Tang, E ThB Tang, F FC Tang, H TC-15-2 Tang, H MA-32-2 Tang, W FA-4-9 Tang, X TA-39-1 Tang, X ThB-34-3 Tani, N ThC-4-27 Tanneberger, T MB-1-14 Tantot, N ThA-42-9 Tao, L TA-4-14 Tao, W TB-16-3 Tao, Z TC-24-1 Tapinassi, L ThC-13-2 Tarchi, L TB-42-1 Tartinville, B ThC-13-2 Taslim, M ThC-34-1 Tateishi, A FB-26-5 Taylor, D MB-5-8 Taylor, J WC-9-3 Teixeira, J FB-26-5 Telschow, D FA-6-5 Templalexis, I ThA Teng, J FC Teramoto, S ThC-4-27 Terhaar, S TC-4-28 Terrell, D TC-21-4 Thanaraj, S ThB-15-6 Thatte, A FC Thern, M TC-17-2 Theron, S WC Thiemann, T FB-15-8 Thole, K ThB-39-8 Thollet, W TA-21-2 Thomas, B WA-24-7 Thomas, J FB-18-2 Thompson, H TC-13-7 Thorpe, S TB-32-3 Thouverez, F ThB-39-8 Ti, C FB-42-2 Tiainen, J FA-26-2 Tian, C FB-37-4 Tian, L TC TIAN, S ThB-11-3 Tian, S WB-20-5 Tian, X WC-4-19 Tian, Y WA-26-6 Tibos, S TC Tiedemann, C ThC-45-8 Tiefers, R ThC-13-2 Tinker, N TB-37-1 Tiralap, A ThA-23-2 Tisarev, A WC-44-3 Tisserant, D ThA-1-10 Tkachenko, A FC-8-9 Toledo Velazquez, M WC-42-6 Tomita, I WB-39-5 Tong, D FC-15-4 Tong, F MA-41-1 Tong, F WA Tong, X MB-4-12 Tong, Y ThA-42-9 Toni, L MB-4-25 Topal, A FA-37-3 Torabi Farsani, A TC Torres, R FC-8-9 Torres Aldaco, A FC-8-9 Torres González, E FB-6-6 torresi, M MA-9-2 Tortora, C TC-46-2 Tourlidakis, A MB Town, J MA-5-3 Traverso, A WB-6-3 Traverso, A MA-21-3 Trbojevic, B MB Trebinjac, I MA-27-1 Tripoli, G WC-13-3 Trouette, B ThC-24-2 Troya, A MA-21-3 Tschuor, R ThC-4-24 Tsujimoto, R FB-23-5 Tsujimura, T TC-45-2 Tu, Q FB-1-1 Tucker, P WC-42-6 Tun, M FB-6-6 Turner, M ThB-26-9 Turunen-Saaresti, T ThC-23-3 Tuttle, S ThC-25-3 Twomey, B FB-41-3 Tyacke, J MA Tyukhtyaev, A TA-38-7 Ubaldi, M MA-18-1 Ubulom, I WB-15-1 Uchida, S ThC-8-6 Ueda, O TC-13-7 Ueguchi, S ThC-13-2 Um, J FC-31-9 Underbakke, H ThA-15-5 Untaroiu, A ThC-25-3 Usman, M ThA-4-3 Utschick, M ThC-23-3 Uusitalo, A ThC-23-3 Uzhegov, N MA-5-3 Uzol, O WB-28-3 Vacchieri, E MA-9-2 Vad, J FB-1-1 Vadlamani, N TC-23-7 Vadvadgi, A TC-46-2 Vafiadis, K ThC-39-9 Vagnoli, S ThC-34-1 Vahdati, M WA-4-22 Valdes, R WC-45-6 Valente, R MB-21-1 Valentin, R MB-27-2 Van Beek, P FA-9-4 van der Spuy, S FB-5-1 van Paridon, A ThC Van Treuren, K MB-30-1 Vania, A TA-23-8 Vannini, G WC-1-8 Vanzante, D FC-31-9 Varney, P FB-18-2 Vasilyev, B ThA-3-3 Vasu, S ThC-17-3 Vazquez, M FB-34-4 Vega, A FA-36-6 Veidt, M WA-12-2 Venturini, P ThA-3-3 Verdy, C FC Vermorel, O FA-3-4 Versailles, P MB-1-14 Versluis, J FA-23-4 Verstraete, D ThC-39-9 Verstraete, T WB-36-1 ThC-23-3 ThA-3-3 MA-24-8 FA-2-2 WB-28-3 TB-4-6 FC-31-9 MB-45-4 WC-17-1 WA-16-4 ThA-1-10 TC-17-2 ThB-19-3 FB-41-3 MB-26-8 TA WA ThA-39-7 MB-26-8 WC-45-6 MA-38-4 MB TC-7-1 FA-9-4 MB-1-14 FA-5-10 FB ThC-1-5 WB-42-3 FA-6-5 ThA-1-10 WC-31-2 MA-27-1 ThA-34-2 ThA-34-2 MB-20-3 MB-32-5 MB-1-14 ThA-16-2 MB TC-42-5 WC-17-1 FB-4-1 MB-23-9 WC-42-6 TC-13-7 TB-44-4 WA WB-1-6 FC-45-1 WC-17-1 ThC-44-9 FA-36-6 TB-36-4 ThA-42-9 ThB-15-6 WB-4-17 WC-19-1 ThA-24-5 MB-23-9 TB-13-5 TC-13-7 WA WB-20-5 MA-26-7 FC-13-6 FA-2-2 ThA MB TC MA-9-2 WA-3-1 MA-37-5 MB-27-2 TA-28-1 TC-13-7 FA FB-29-1 Vesely, L Vick, M Vierling, M Vigdal, L Villa Montero, M Villari, P Vinkeloe, J Vinogradov, A Vinogradov, K Vinton, K Virgilio, M Visser, W Vitale, I Voet, M Vogel, P Vogeler, K Vogt, D Voigt, A Voigt, C Voigt, M Voigt, P Volino, R Völker, S Volponi, D von Backström, T Von Der Bank, R von der Haar, H von Karstedt, W von Plehwe, F Voss, C Vouros, S Vratny, P Wade, J Wagner, F Waite, J Wakelam, C Wakui, T Wallaschek, J Walsh, M Wan, C Wang, A Wang, A Wang, A Wang, B Wang, B Wang, B Wang, C Wang, D Wang, F Wang, F Wang, G Wang, G WANG, H Wang, J Wang, J Wang, J Wang, J Wang, J Wang, J Wang, K Wang, L Wang, L Wang, L Wang, L Wang, L WANG, P Wang, Q Wang, R Wang, R Wang, S Wang, S Wang, T Wang, T Wang, W Wang, W Wang, W Wang, W wang, X Wang, X FC-13-6 MA-5-3 MA-41-1 MB-36-2 ThB-11-3 WC-19-1 FB-29-1 FB-44-1 ThA-42-9 WA-10-3 WA WB-1-6 WC-45-6 FB-41-3 MA-11-1 MB-20-3 TA-5-6 TB-13-5 ThC-38-2 WB-42-3 WC-1-8 MB-37-2 MA-4-21 WC ThB-2-1 ThC-34-1 FC-31-9 TB-21-8 WC-19-1 ThA-28-4 ThA-15-5 MA WB-42-3 FB-46-4 ThB-11-3 TC-42-5 ThB-19-3 WC-22-1 TB-16-3 FB-4-1 TC-39-2 FB-44-1 TA-38-7 WC-4-16 MB-14-2 ThB-8-8 TC-4-28 MB-45-4 MB ThA-22-2 ThC-4-27 WC-4-19 WA-10-3 ThB-39-8 FA-19-5 FC-6-7 TA-11-5 ThB-26-9 FC-8-9 ThA-23-2 FB-42-2 MB-37-2 TB TB TB-4-2 WC-19-1 WC-31-2 WC-44-3 FA-9-4 WC-5-7 WA-26-6 TB-38-3 MB-4-12 ThC-34-1 ThA-16-2 TA-4-13 WC-4-16 WB-42-3 TA-21-2 Wang, X Wang, X Wang, X Wang, X WANG, X Wang, X Wang, Y Wang, Y Wang, Y Wang, Y Wang, Y Wang, Y Wang, Y Wang, Z Wang, Z Wang, Z Wang, Z Wang, Z Wang, Z Wang, Z Wang, Z Wartzek, F Wassmer, D Watanabe, E Watanabe, F Watanabe, T Watson, C Watson, M Watson, T Wawrzynek, P Weaver, B Weber, A Wedeking, M Wegner, F Wei, D Wei, J Wei, J Wei, J Wei, K Wei, S Wei, W Weigel, B Wein, L Weinzierl, J Weiss, T Welch, M Weller, R Wells, R Wen, F Wen, X Wendler, J Weng, S Weng, Y Wenhua, W Werschnik, H Wettstein, H Whitaker, S White, A White, C White, M Whitlock, M Wicks, A Wiedermann, A Wiers, S Wieth, L Wilkes, E Wilkes, J Wilkins, C Wilkinson, M Willert, C Williams, R Willinger, R Wilson, M Wilson, M Winchler, L Wind, T Wirsum, M Wittrock, D Witz, G 158 ASME 2016 TURBO EXPO

159 Author Index TA-4-14 Woisetschlaeger, J TB Wolf, D FB-26-5 Wolf, H MB-40-3 Wolf, H TA-5-6 Wolff, S FC-19-6 Wong, T TA-37-6 Woo, G FC-31-9 Wood, H ThA-15-5 Wood, H WC-42-6 Wooldridge, M WC-17-1 Wright, L FC-15-4 Wróblewski, W WC-19-1 Wu, A WA-12-2 Wu, B TB-28-2 Wu, D TC-39-2 Wu, H WC-15-3 Wu, H FA-26-2 Wu, Q MB Wu, Q MB-23-9 Wu, W FB-44-1 Wu, X MA-21-3 Wu, X MA-27-1 Wu, X MA-4-5 Wu, Y MA-37-5 Wu, Y TC WU, Y TC Wu, Y WB-12-3 Wu, Z FC-6-7 Wuerth, M ThC-31-6 Wygant, K FA-16-5 Wylie, S ThB Xi, G TB-36-4 Xia, J ThC-39-9 Xia, Z ThB Xiang, X MA-26-7 Xiao, L MA-4-5 Xiao, Y WC-39-6 Xiaochen, M FC-45-1 Xiaofeng, L ThC-44-7 Xiaofeng, S WC-39-6 XIAOXIONG, W ThB-4-26 Xie, R FA-4-9 Xin, J WA-42-4 Xin, J WB-38-6 Xin gen, L MB-26-8 Xiong, J MA-4-5 Xiong, Y ThA-6-4 Xisto, C ThA-28-4 Xu, B ThB-4-26 Xu, B ThC-44-7 Xu, D TC-31-1 Xu, F FB-4-1 Xu, G WB-4-11 Xu, G ThB Xu, J ThC-25-3 Xu, J MA-41-1 Xu, K MA-27-1 Xu, M FC-45-1 Xu, S MA-26-7 XU, S FC-1-3 Xu, W WA-16-4 Xu, W WC-4-19 Xu, W ThB Xu, X MB-32-5 Xu, Z TB-28-2 Xuan, F ThC-13-2 Xue, F FB-23-5 Xue, X MB XUE, X ThA-22-2 Xue-You, W ThA-6-4 Yakinthos, K FA-4-9 Yamada, H ThC-44-7 Yamada, K MA-18-1 Yamada, S TA Yamamoto, S ThB-8-8 Yamazaki, H FA Yan, J FB-1-1 Yan, L TC-39-2 Yan, Q FB-26-5 Yan, W WA-26-6 Yan, X WB-28-3 Yan, X TC-13-7 Yan, Y WC-45-6 Yan, Y WB-38-6 Yanfeng, Z FB-26-5 Yang, C FC-1-3 YANG, C MA-5-3 Yang, C MB-23-9 Yang, C MB-23-9 Yang, C TC-42-5 Yang, C TB-42-1 Yang, D WC Yang, D WB-44-5 Yang, G FC-1-3 Yang, H MB-26-8 Yang, H WA-37-8 Yang, H MB-26-8 Yang, J MB-26-8 Yang, J MB-36-2 Yang, J WB-4-11 Yang, J TB-28-2 Yang, K FA-11-4 Yang, L FB-5-1 Yang, S FB-19-8 Yang, S WC Yang, S WB-1-6 Yang, W FA-11-4 Yang, X TA-30-4 Yang, X ThC-45-8 Yang, X ThC-25-3 Yang, Y WC Yang, Y WC-1-8 Yangang, W ThB-39-8 Yanhui, D TC-4-28 Yaquinto, M WA-46-6 Yassin, K MA-5-3 Yavrucuk, I WA-12-2 Yavuzkurt, S FC-13-6 Ye, L ThB Ye, S WA-42-4 ye, Z WB-12-3 Yee, K FB-5-1 Yepifanov, S TB-23-6 Yi, J FA-37-3 Yi, W MB-26-8 Yi, X FA-26-2 Yin, M TC-23-7 Yin, Y TB-36-4 Yiping, D MB-20-3 Yokoyama, R FB-4-23 Yoshida, S TB-16-3 You, R FA-37-9 Young, A ThC-23-3 Young, T ThA-26-4 Yu, D FC-1-3 YU, G WB-42-3 Yu, H FA-37-3 Yu, J WC-17-1 Yu, J TB-25-1 Yu, L WA-42-4 Yu, L TC Yu, M TA-30-4 Yu, P ThB-19-3 Yu, Q FC-13-6 Yu, X TA-21-2 Yu, Y WB-23-1 YUAN, Q WC-19-1 Yuan, R FC-19-6 Yuan, X FA-4-9 Yuan, Y TB-44-4 Yue, L TC-3-5 Yun, Y ThC-4-27 Yunoki, K MB-1-14 Yves, D ThC-8-6 Zachary, J ThB-11-3 Zacharzewski, P FB-4-23 Zahn, M TC-3-5 Zaima, N TA-36-3 Zakariya, M TC-31-1 Zamanian Yazdi, B ThA-38-8 Zamboni, G ThC-44-9 Zambonini, G ThC-44-9 Zamiri, A WA-3-1 zampilli, M TC-4-18 Zander, L TA-32-1 Zang, C FA-36-6 Zang, J WC-4-19 Zang, S TC-46-2 Zaproudis, I FA-3-4 Zarzalis, N FB-5-1 Zelenskyi, R TC-42-5 Zeng, H TA-11-5 zeng, J TA-4-14 Zerobin, S MA-26-7 Zess, J ThB Zha, G TA-12-1 Zhai, Y TA-30-4 Zhang, B FB-19-8 Zhang, C TB-28-2 Zhang, C ThC-38-2 Zhang, C WB-4-17 zhang, C WC-45-6 Zhang, C TA-30-4 Zhang, D TC-45-2 Zhang, D ThC-24-2 Zhang, D ThB-11-3 Zhang, F FA Zhang, G FB-5-1 Zhang, H MA-37-5 zhang, H WB-20-5 Zhang, H TC-3-5 Zhang, J WA Zhang, J WC-17-1 Zhang, J FA-2-2 Zhang, L FB-23-5 Zhang, L FB-26-5 Zhang, L FC-15-4 Zhang, L TC Zhang, L WC-13-3 Zhang, L TB-38-3 Zhang, M TB-38-3 Zhang, M TC-4-18 ZHANG, M WA-16-4 Zhang, P TA-30-4 Zhang, Q TB-13-5 Zhang, Q WC-44-3 Zhang, Q TC-23-7 Zhang, S TB-38-3 Zhang, T ThC-44-9 Zhang, T ThC-38-2 Zhang, W WB-12-3 Zhang, W FB-19-8 Zhang, X FB-23-5 Zhang, X MB Zhang, X ThA-34-2 Zhang, X FC-1-3 ZHANG, Y FC-19-6 Zhang, Y MB-40-3 Zhang, Y TC-23-7 Zhang, Y MA-4-5 Zhang, Z MA-4-5 Zhang, Z MA-21-3 Zhang, Z TC ZHANG, Z TB-23-6 Zhao, B TA-12-1 Zhao, D ThC-34-1 Zhao, F WB-42-3 Zhao, H TA-28-1 Zhao, N TC-5-4 Zhao, N TB-28-2 Zhao, P TB-36-4 Zhao, P ThB Zhao, Q TC-42-5 Zhao, S WC-1-8 Zhao, W MB-27-2 Zhao, X ThA-6-4 zhao, X ThA-28-4 WA-41-2 FA-4-9 FB-4-1 MA-32-2 WB-39-5 ThB-39-8 FC-45-1 ThC-44-7 TA-12-1 ThA WA-37-8 FC-13-6 TC-31-1 ThB-4-26 WB-38-6 MA-18-1 TB-13-5 MA-38-4 ThA-12-4 TC-1-9 TA-32-1 ThC-8-6 ThA-12-4 FB-5-1 WA WB-20-5 FB-44-1 WA-42-4 FB-19-8 MB-10-2 MA-26-7 MB TC MA-4-5 TA-12-1 MB-4-12 TA-11-5 TC-42-5 WC-22-1 ThB-4-26 WC-45-6 ThC-44-7 TC-23-7 FB-26-5 ThA-15-5 ThA-22-2 FA ThC-38-2 TB-36-4 TB-4-2 WC-25-2 MB-4-25 FC-34-6 WB-39-5 MB-4-25 MB-4-12 MA-32-2 WB-4-20 ThC-45-8 ZHAO, X Zhao, X Zhao, Y Zhao, Y Zhao, Y Zhao, Y Zhaolin, F zhaoyun, S zheng, L Zheng, Q Zheng, T ZHENG, X Zheng, Y Zheng, Y Zheng, Y Zhijun, L ZHIXun, X Zhong, F Zhong, G Zhong, L Zhong, Y Zhou, B Zhou, B Zhou, C Zhou, D Zhou, E Zhou, J Zhou, K Zhou, L Zhou, S Zhou, W Zhou, X Zhou, X Zhou, Y Zhou, Z Zhu, H Zhu, J Zhu, J Zhu, J Zhu, K Zhu, M Zhu, P zhu, Z Zhuge, W Zhuhai, Z Zierer, T Zi-gang, S Zimmermann, A Zimmermann, T Zitney, S Zizin, A Zocca, M Zoller, B Zori, L Zubanov, V Zubrilin, I Zubrilin, R Zucca, S Zunino, P Zur, S FINAL PROGRAM 159

160 Notes 160 ASME 2016 TURBO EXPO

161 Notes FINAL PROGRAM 161

162 Notes 162 ASME 2016 TURBO EXPO

163 Schedule at a Glance Sunday June 12 Monday June 13 Tuesday June 14 Wednesday June 15 Thursday June 16 Friday June 17 Registration 7:00 a.m. 5:30 p.m. Hall C4 Registration 7:00 a.m. 6:30 p.m. Hall C4 Registration 7:00 a.m. 6:30 p.m. Hall C4 Registration 7:00 a.m. 5:30 p.m. Hall C4 Registration 7:00 a.m. 3:00 p.m. Hall C4 GT Workshops 8:00 a.m. 5:00 p.m. Rooms 204, 205, 206, 209, 210 Speaker Ready Room 7:00 a.m. 5:30 p.m. Room 310 Session Participant Networking Coffee 7:15 8:00 a.m. Hall C4 Speaker Ready Room 7:00 a.m. 5:30 p.m. Room 310 Session Participant Networking Coffee 7:15 8:00 a.m. Hall C4 Speaker Ready Room 7:00 a.m. 5:30 p.m. Room 310 Session Participant Networking Coffee 7:15 8:00 a.m. Hall C4 Speaker Ready Room 7:00 a.m. 5:30 p.m. Room 310 Session Participant Networking Coffee 7:15 8:00 a.m. Hall C4 Speaker Ready Room 7:00 a.m. 3:30 p.m. Room 310 Session Participant Networking Coffee 7:15 8:00 a.m. Hall C4 Conference Sessions 8:00 10:00 a.m. Plenary: Asset Optimization and Monitoring in the Information Age 8:00 8:45 a.m. Grand Ballroom Plenary: Gas Turbine Manufacturing in the Energy Age 8:00 8:45 a.m. Auditorium Conference Sessions 8:00 10:00 a.m. Conference Sessions 8:00 10:00 a.m. Registration 12:00 6:00 p.m. Hall C4 Speaker Ready Room 1:00 6:00 p.m. Room 310 Council of Chairs 6:00 7:30 p.m. Room 300 Opening Session: Turbo Expo Keynote Panel & Awards Program 10:15 a.m. 12:15 p.m. Grand Ballroom Conference Sessions 9:00-10:30 a.m. Coffee Break 10:30-10:45 a.m. Conference Sessions 10:45 a.m. - 12:45 p.m. Conference Sessions 9:00-10:30 a.m. Coffee Break 10:30-10:45 a.m. Conference Sessions 10:45 a.m. - 12:45 p.m. Coffee Break 10:00 10:15 a.m. Conference Sessions 10:15 a.m. 12:15 p.m. Expo Open 11:30 a.m. 2:30 p.m. Hall C1 Coffee Break 10:00 10:15 a.m. Conference Sessions 10:15 a.m. 12:45 p.m. Expo Lunch Opening Lunch 12:30 2:30 p.m. Hall C4 Expo Open 12:30 6:30 p.m. Hall C1 Expo Open 12:30 6:30 p.m. Hall C1 12:30 2:30 p.m. Closing Ceremony 1:45 p.m. Hall C1 Closing Lunch 12:30 2:30 p.m. Hall C4 Expo Lunch Conference Sessions 2:30 5:30 p.m. 12:30 2:30 p.m. Poster Session 12:30 2:30 p.m. Hall C1 Expo Lunch 12:30 2:30 p.m. Hall C4 Conference Sessions 2:30 5:30 p.m. Conference Sessions 2:30 5:30 p.m. Conference Sessions 2:30 5:30 p.m. Conference Sessions 2:30 5:30 p.m. Welcome Reception 6:00 7:30 p.m. InterContinental Seoul COEX Harmony Ballroom and Diamond Room Expo Hall Reception 5:00 6:30 p.m. Hall C1 Committee Meetings 6:00 7:30 p.m. Women in Turbomachinery Event 7:45 10:30 p.m. Off-site Venue Expo Hall Reception 5:00 6:30 p.m. Hall C1 Committee Meetings 6:00 7:30 p.m. ECE/Student Mixer 6:45 8:00 p.m. Auditorium Lobby Committee Meetings 6:00 7:30 p.m. FINAL PROGRAM 163

164 Are You Up to the Challenge? Your product promise is low fuel burn and reliable turbomachinery. ANSYS can help you realize this with multiphysics engineering simulation tools that provide high-fidelity results. In a time frame that gets your product to the customer faster than you ever thought possible. Visit us at Booth # 800 Realize Your Product Promise Visit ANSYS.COM to learn how simulation software can help you realize your product promise.