YOUR LOCAL SOURCE IN A GLOBAL WORLD GLOBAL OUTSOURCING
|
|
- Clement Murphy
- 8 years ago
- Views:
Transcription
1 GLOBAL OUTSOURCING
2 Save from 30% to 75% on your components with fi nished machined components from China. In China there are millions of subcontractors but only a few of these are able to supply high-quality tested and well- documented components with material certifi cates from international classifi cation companies. For many years we have worked closely with the best of these to give you the risk-free opportunity to purchase high-quality components at low prices. To make it as easy for you as possible, we have our own engineers in China, and they are able to redraw your sketches or production drawings to e.g. detailed casting drawings in 2D and 3D. All this makes it risk-free, time-saving and very easy for you to buy your next components through us. Furthermore, outsourcing gives you the advantage of freeing capacity in your workshops, allowing you to increase your overall production without investments in machines and buildings. It also gives you the advantage of being able to adjust production capacity according to the needs on the market. By reducing your drawing hours, we help you not just to save money but also to increase your drawing capacity. We follow the production and make sure that the promised delivery times are kept and the needed quality documents are present before the parts are shipped. NDT and dimension control reports are made according to the actual need on each order, as are approval and inspection from international classifi cation companies. 2
3 Typical parts In general, components that take up a lot of hours in your production are perfect for outsourcing. Parts made of steel plates that are cut, machined and then welded together can successfully be redesigned as castings. Castings minimize the waste of material and machining time and remove the welding process. Cast parts are stronger than welded parts, and by using casting, you can optimize the wall thickness to get optimal transmission of forces and reduced size and weight. The casting process is labor intensive, but in China the cost of labor is quite reasonable, and we can therefore offer molds at low prices, which makes it profi table to produce even low volume parts as casting. You can send us your drawings, or we can visit your company and help you fi nd the parts in the workshop that you could successfully outsource. 3
4 We supply castings from 0.1 kg to 175 tons and series from 1 piece to 1 million pieces. We supply all type of metals, steel, iron, stainless, aluminum, brass and bronze. The typical steel qualities are S355J2G3, GS20Mn5, ASTM 4340, 34CrNiMo6 and 22CrNiMo Stainless qualities are AISI 304, AISI 316 L and S165M/AISI630 Cast iron: GG20, GG30, GG40 and GGG40, GGG50 (Please note: Not recommended at low temperatures) Other common metals: RG5/10 and NiAIBz. All materials can be delivered with certifi cates 3.1 and 3.2 (3.1B and 3.1C) DNV, ABS, GL, Lloyds and others. 4
5 A typical project plan for casting: ACTION RFQ Detailed offer and drawings are made and sent for approval Order and order confi rmation Molds and samples are made Samples sent for approval in US or EU by customer Final production/ready to ship Shipment to the US or EU TIME 3-7 days 2-3 days days Air 3-5 days, Ship 4-5 weeks days Air 3-5 days, Ship 4-5 weeks 5
6 High-precision machining We also offer you a complete solution in high-precision machining. Both small and large series of components in both standard steel, high-strength steel, as well as stainless steel are machined in a relatively short time. We can always fi nd free capacity for your order. We master the following processes: Laser cutting in different materials and thicknesses Plasma and torch cutting Shortening Automatic sawing Plate sheers Plate roller Welding also with certifi cates Drilling Bending machines Turret punching CNC Drilling - Turning - Milling CNC turning machines CNC bending off presses CNC milling machines Manual turning lathes Manual milling machine 6
7 If you like, we can perform pre-assembly, so parts are ready for your production, e.g. mounting of bearings, pins, signs or other parts. Surface treatment: Polishing and deburring Shot-blasting Sand-blasting Powder-coating Galvanization Wet painting (Also offshore painting systems compliant with Norsok) Chromatization Nickel-platingo Chrome-plating Tin-plating Silver-plating Alkaline blackening Assembly A typical project plan for high-precision machining: ACTION RFQ Detailed offer and drawings are made and sent for approval Order and order confi rmation Samples are made Samples sent for approval in US or EU by customer Final production/ready to ship Shipment to the US or EU TIME 1-4 days 2-3 days 1-10 days Air 3-5 days, Ship 4-5 weeks days Air 3-5 days, Ship 4-5 weeks 7
8 Do you need quick delivery, service or manpower? GLOBAL SUPPLIER SUPPLIERS NETWORK We help you fi nd a local source for high-quality service, quick delivery or manpower. We have made trade agreements with European suppliers of hydraulic equipment, hydraulic services, transmission elements, machining subcontractors, chrome-plating and companies that can rent out qualifi ed manpower. Additionally, in Denmark we can offer installation, development, production and repair of hydraulic systems, block and warehousing of well-known brand components, as well as rent out hydraulic technicians and service personnel. GLOBAL SUPPLIER REFERENCE CUSTOMERS AkerSolutions AMV FLS ODIM JMC TTS DISA Hydramarine Brammidan Hytek Total For more information, visit our website Global Supplier ApS Skagensvej 334 DK-9800 Hjørring Phone: Fax: info@globalsupplier.eu
YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS
YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS CASTINGS WELDING FORGINGS CNC PLATE MACHINING CASTINGS WELDING There are many obvious benefits for you by choosing to use castings.
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More informationThe Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
More informationSBS INDUSTRIES 24hrs. Worldwide support number 1-954-767-0309 www.sbs-international
SBS INDUSTRIES 24hrs. Worldwide support number 1-954-767-0309 www.sbs-international Hot water storage tanks New boiler manufacturing Boiler repair The SBS Group is among the world s leading boiler repair
More informationLKL Staal BV Specialized in customer specific metallurgical components
LKL Staal BV Specialized in customer specific metallurgical components WHAT IF YOU COULD COMBINE LOW-COST PRODUCTION WITH WESTERN QUALITY STANDARDS... WWW.LKLSTAAL.COM LKL STAAL DELIVERS Castings - Investment
More informationTechnical Services & Capabilities
Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product
More informationINSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES
INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES GREAT PRODUCTS ARE ONLY PART OF OUR SUCCESS. YOU SHOULD MEET OUR PEOPLE. From the machinist with over 20 years experience
More informationALIKO Oy Ltd. Finn-Power Oy
ALIKO Oy Ltd Huhmarinmäentie 38 FIN-31700 Urjala, Finland Tel. +358 20 728 0370 Fax +358 20 728 0389 http://www.aliko.fi CNC Press brakes CNC Guillotine shears Water jet cutting systems Plasma cutting
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationPARTNERS and RESPONSABILITIES
Location Key Facts Core Business Design and manufacture management of heavy machined steel structures and components for steel mill industry. Sales up to 40 MLN Staff 190 person Area of shops 35.000 m²
More informationDESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT
DESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT THE PTM ADVANTAGE PTM has been producing metal stampings since 1972. Our expertise and experience is wide ranging, to include detail part
More informationMetalworking to go. Discover direct on-site mobile machining!
Metalworking to go Discover direct on-site mobile machining! Benefit from intelligent machining methods right on site With Miba s mobile CNC machining units Wherever and whatever you want to machine directly
More informationFRIULFORGIA Srl COMPANY PRESENTATION. We shape your world
FRIULFORGIA Srl We shape your world COMPANY PRESENTATION E-mail: info@friulforgia.it - Web: www.friulforgia.it 1 FRIULFORGIA Foundation and facts Friulforgiaisa privatelyheldcompany, whichstarteditsactivitiesin
More informationNC Sourcing Company Presentation 2013
Global Sourcing NC Sourcing Company Presentation 2013 About NC Sourcing Your industrial subcontractor, a complete solution of production, logistics and quality management efficiency to your sourcing and
More informationCompany LOGO. Gizelis Group. Company Profile 2010. www.gizelis.com. www.company.com
Company Profile 2010 Gizelis Group The Facts- Company History Dominant presence in Sheet Metal Processing Industry for over 50 years Founded by Stamatios Gizelis in the 1960 s 1 9 6 0 1 9 7 0 1 9 8 0 1
More informationNingbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
More informationCOMPLETE SOLUTIONS IN CONTRACT MANUFACTURING
COMPLETE SOLUTIONS IN CONTRACT MANUFACTURING REAL ESTATE ASSEMBLY WORKS METAL WORKING SURFACE COATING Main facts about DAMBIS Employees: 2015 62 Turnover: 2011 3,6 million Euro 2012 3,6 million Euro 2013
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationFRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
More informationAPI Upstream Standard Development Update - Supply Chain Management. Rick Faircloth
API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national
More informationCOMPANY PROFILE. PROKO CONSTRUCTION INDUSTRY LTD. Yenikent Mh. 2477.Sk. No:2/A D:1 T: +90 262 721 44 10 F: +90 262 721 44 11
COMPANY PROFILE PROKO CONSTRUCTION INDUSTRY LTD. Yenikent Mh. 2477.Sk. No:2/A D:1 T: +90 262 721 44 10 41400, Gebze, KOCAELİ F: +90 262 721 44 11 www.prokoyapi.com info@prokoyapi.com CORPORATE Domestically
More informationSERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More information:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationErich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
More informationReal Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie
Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives Dr. Christopher Rush Joe Falque Karen McRitchie Overview Introduction Composite Structures New Challenges Background and Related
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationHYDRA-GRENE - A Powerful Partner for the Industry
HYDRA-GRENE - A Powerful Partner for the Industry Quality products and recognized brands As a Danfoss Sales & Service Partner, Hydra has in-house specialists. We offer PLUS +1 programming and flexible
More informationAWS ACHSLAGERWERK Staßfurt GmbH
AWS ACHSLAGERWERK Staßfurt GmbH Contents The Company 2 Products 5 Our own Products 6 Fixed Machinery 11 Certifications 12 Quality Assurance 15 Services 16 History 19 References 20 THE COMPANY AWS Achslagerwerk
More informationCustomer environment. Customers
Customer environment Customers GS-Hydro s non-welded piping systems are used in a number of applications in the offshore market. Drilling packages, ring lines, different types of cranes & winches are typical
More informationPerfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
More informationDIE SETS - MACHINED PLATES ACCORDING TO DRAWING CONTENTS
DIE SETS MACHINED PLATES ACCORDING TO DRAWING CONTENTS Page MACHINE CAPACITIES 2.02 SPECIAL DIE SETS 2.032.07 MDL GEOMETRIC STANDARDS 2.08 DIMENSIONING INSTRUCTIONS FOR SPECIAL 2.09 RECTANGULAR DIE SETS
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
More informationIKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
More informationThyssenKrupp Companhia Siderúrgica do Atlântico, Brazil. Outsourced workshop and maintenance services for integrated steel plant. Metals Technologies
ThyssenKrupp Companhia Siderúrgica do Atlântico, Brazil Outsourced workshop and maintenance services for integrated steel plant Metals Technologies 1 Professional maintenance services for entire steel
More informationwww.steelformcatering.com
www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationDEMIRSAN. w w w. d e m i r s a n m e t a l. c o m. t r Page 1
DEMIRSAN The foundation of our company had laid as a lathe workshop by Mr. Bekir Demir, in Karabağlar, at 1972 that had continue to operate in this way for a long time.after that our General Manager Mr.
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationBAUER Manufacturing Inc.
BAUER Manufacturing Inc. Conroe, Texas Supplying Equipment and Services to Industry 2/2013 BAUER Manufacturing Inc. BAUER Manufacturing Inc. (BMC) is located in the City of Conroe, Texas, approximately
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationHamilton Form Company, Ltd Custom Designs, Flexible Solutions
Hamilton Form Company, Ltd Custom Designs, Flexible Solutions 1 IFC 2 CUSTOM DESIGNS, FLEXIBLE SOLUTIONS Hamilton Form has been designing and building custom steel forms for the precast industry since
More informationYour One Stop Source for CUSTOM FABRICATION CONTRACT MANUFACTURING
Your One Stop Source for CUSTOM FABRICATION CONTRACT MANUFACTURING The Will-Burt Company is your One Stop Source for contract manufacturing and custom fabrication that delivers quality products on-time.
More informationIntroduction FRIGERIO ETTORE spa Lecco (Italy) Rev.09 1 / 19
Introduction FRIGERIO ETTORE spa Lecco (Italy) Rev.09 1 / 19 HISTORY Frigerio Ettore S.p.A. is a family run company founded in 1948 with a strong presence in the European metal working market. Frigerio
More informationAPPLYING RAPID TOOLING FOR INJECTION MOLDING & DIE CASTING From a RT users perspective
APPLYING RAPID TOOLING FOR INJECTION MOLDING & DIE CASTING From a RT users perspective Glenn Anderson Senior Engineer, Research and Development Southco, Inc. RPA/SME Technical Forum on Rapid Tooling 20
More informationIntroduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
More informationSondex Welded heat exchangers:
Sondex A/S is a Danish company specialized in the development, design and production of plate heat exchangers and freshwater distillers. Since its foundation in 1984 SONDEX has grown into a wide global
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationPRECISION METAL STAMPINGS & ASSEMBLIES FOR THE MEDICAL DEVICE INDUSTRY
PRECISION METAL STAMPINGS & ASSEMBLIES FOR THE MEDICAL DEVICE INDUSTRY COMPONENTS & ASSEMBLIES FOR SURGICAL INSTRUMENTS & CLASS-CRITICAL IMPLANTABLE DEVICES COMPONENTS AND ASSEMBLIES FOR INDUSTRIES, INC.
More informationTool changer. Rugged and durable. For universal use. Payload up to 800 kg
Tool changer TK-Series Rugged and durable For universal use Payload up to 800 kg 02 our own Development Dept. our own Manufacturing Division. Unbeatable in reliability. A product portfolio setting standards
More informationWelding. Module 19.2.1
Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal
More informationdrawworks WWL started manufacturing drawworks over 40 years ago under the BDW brand. draw on our experience BDW Model 2000-MX or MXE
Our experience benefits our customers WWL started manufacturing drawworks over 40 years ago under the BDW brand. Within the Oil & Gas drilling industry, the BDW brand is known as the Cadillac of drawworks.
More informationAAF Manufacturing Services. Leading the way in engineering excellence
AAF Manufacturing Services Leading the way in engineering excellence Contents Introduction Parts Manufacture Weld Assembly Surface Protection Mechanical & Electrical Final Assembly service agreements Introduction
More informationMechanical Installation
Page -1-1. INTRODUCTION AND PURPOSE 1.1. This specification covers the installation, testing and precommissioning of mechanical equipment. Work is to be performed in conjunction with the manufacturer s
More informationProcess Engineering and Product Engineering. Dr. P. M. Pandey
Process Engineering and Product Engineering Dr. P. M. Pandey The Process Engineering Function Process: It is simply a method which products can be manufactured from raw materials. It could also be described
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationAdvanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between. T E C H N O L O G I E S. High Volume Hydromat.
MACHINING T E C H N O L O G I E S High Volume Hydromat CNC Milling CNC Swiss Machining CNC Turning Engraving Secondary Operations Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between.
More informationDIVERSIFICATION INTEGRITY MARKETS SERVED BUILT ON BUILT ON
BUILT ON DIVERSIFICATION Saulsbury Industries is a full-service Engineering, Procurement and Construction (EPC) contractor that has provided engineering, general construction, and electrical and maintenance
More informationTerminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
More informationEnclosures 1-866-338-0988. DuraSystems Barriers, Inc. www.durasystems.com Email: sales@durasystems.com. The Passive Fire Protection Specialists
Enclosures Sturdy single and double wall fire protection construction Impact resistant Fast & easy installation Pre-manufactured and modular Available in galvanized, stainless steel & other specialty metals
More informationSTENCA PIPE. High quality pipe insulation. www.stenca.com
STENCA PIPE High quality pipe insulation WELCOME TO STENCA TRADING - Global focus with local service Stenca Trading offers optimal solutions for the offshore, marine, refineries and cogeneration industry.
More informationSpecifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
More informationTEST REPORT. Rendered to: HOMELAND VINYL PRODUCTS, INC. For:
TEST REPORT Rendered to: HOMELAND VINYL PRODUCTS, INC. For: PRODUCT: Gorilla Column PVC Porch Post System with PVC Base / Cap Plates, PVC Bushings and 2-3/8 in Diameter and 3-1/2 in Diameter Galvanized
More informationSteel Fire Sprinkler Pipe
Steel Fire Sprinkler Pipe Wheatland Tube Fire Sprinkler Products Wheatland Tube began producing steel fire sprinkler pipe in 1931, and today offers the most complete line of products in the industry. Engineers
More informationM.B.P. due to its extensive experience.is present in many field of activity. OUR SPECIALITY : MACHINING OF MECHANICAL PARTS
M.B.P. due to its extensive experience.is present in many field of activity. To fulfill your projects, our performance concerns are applied at all levels. Our organization, along with the quality of our
More informationSECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
More informationAcceptance Codes APPENDIX - A. Acceptance Criteria
1111 Receipt of a satisfactory Test Report from WSDOT Materials Laboratory is required indicating the lot (or lots) or batch of material meets the requirement of the specifications under which it is listed.
More informationstainless steel pre-assembled manifolds
TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
More informationUlus Metal. 9-Apr-14
1 History : 1970 Production of stamped metal parts for automotive industry 2007 Moved to a new plant in Gebze Industrial zone on a 8000 m 2 closed area. 2009 First non-automotive business started Total
More informationMESA MAKINA. Since 1979. Company Presentation. Welcome. Since 1979
Company Presentation Welcome Historical Time line of Mesa Foundation by Mr. Mehmet Tekelioglu Manufacturing casting part in house Achieving ISO9001:2000 certification by BVQI Achieving ISO TS 16949 certification
More informationIndustrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationNORTHFIELD METAL PRODUCTS
NORTHFIELD METAL PRODUCTS CUSTOM METAL & PLASTIC COMPONENT MANUFACTURING SINCE 1974 PROGRESS through engineering & design WHO WE ARE Northfield Metal Products, located in Waterloo Ontario Canada, has been
More informationScepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" We build tough products for tough environments Standing Still is Not an Option. We re proud to introduce the NEW
More informationDissimilar Metal Corrosion
PDHonline Course S118 (1 PDH) Dissimilar Metal Corrosion Instructor: D. Matthew Stuart, P.E., S.E., F.ASCE, F.SEI, SECB, MgtEng 2013 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More informationDefinition of skill lists and engineering levels at Innomet system
Definition of lists and engineering levels at Innomet system Work package 4.1&4.3 Document No.: INNOMET II D4.1&D4.3 Status: Final Report INNOMET II WP4.1&4.3 Authors: Name Organisation E-mail Jyri Riives
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationFree Examples of plant layout drawing
Free layout examples; a wide variety of industrial layouts, within different facility types. Principles of plant layout and design will apply widely. Free Examples of plant layout drawing Principles of
More informationMaterial Comparison Lower Quality Blender Optimum 9400. Electric Motor Assembly. Plastic Fans Low cost
Below is a factual comparison between our Optimum 9400 model and a lower quality high-speed blender dated May 20 th 2014. This comparison has been independently conducted, reviewing the key components
More informationverope AG St. Antons-Gasse 4a CH-6300 Zug / Switzerland Tel: +41 (0) 41 72 80 880 Fax: +41 (0) 41 72 80 888 Your requirements are our focus.
verope AG is a Joint Venture company between Pierre Verreet, head and founder of verope, and Kiswire Ltd. from South Korea. The concept of verope is to design and to manufacture high quality crane ropes
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationA long-established trading company that deals in 1,300 tons of steel products every month.
Case Study KAMATA SPECIAL STEEL CO.,LTD. Profitability has increased through the improvement of material yield and reduction of labor. A long-established trading company that deals in 1,300 tons of steel
More informationSECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL PART 1 - GENERAL 1.1 WORK INCLUDED IN THIS SECTION A. The WORK of this Section includes the repair, demolition, and disposal of asbestos
More informationAdded Value Engineering
Added Value Engineering Profile Stephenson Engineering is a long established engineering company, operating from a seven acre site in Atherton near Manchester. We have extensive facilities for the manufacture
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationSTB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
More informationDESIGN & PROJECT MANAGEMENT
AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,
More informationTHE CAPABILITIES OF ZINC DIE CASTING
THE CAPABILITIES OF ZINC DIE CASTING Presented by: Ryan Winter (Manager Customer Engineering Services) Eastern Alloys, Inc. Eastern Alloys, Inc. Introduction to ZINC Introduction to Zinc Zinc is the 4th
More informationMETRA BLANSKO - History
1 METRA BLANSKO - History 2 METRA BLANSKO a.s. is the company with over 100 years history. Company was established by Czech engineer Mr. Erich Roucka in 1911 as the first factory for electrical measurement
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationENGINEERING DESIGN MANUFACTURING ENGINEERING DESIGN MANUFACTURING HYDRAULIC SYSTEMS
ENGINEERING ENGINEERING HYDRAULIC SYSTEMS TS APPLICATIONS ABOUT HIDROSER HYDRAULIC SYSTEM ENGINEERING ABOUT HIDROSER Hidroser, as a certified Parker distributor supplies fluid power solutions for diverse
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More information. company with a tradition of more than 70 years.
. company with a tradition of more than 70 years. DESIGN CHECKING PATTERN SHOP TOOL SHOP FIRM The history of the carpentry firm begins in the years of World War II. At first, three to eight employees were
More informationcreating progress for the future
CREATING PROGRESS OFFSHORE creating progress for the future CREATING PROGRESS SCANAOFFSHORE Scana Offshore group of companies will be present at the OTD in Stavanger, October 23-24 2013. The companies
More informationPIONNIER Consulting Services Research. Consulting. Outsourcing www.pionnierllc.com
2012 PIONNIER Consulting Services Research. Consulting. Outsourcing www.pionnierllc.com PIONNIER Consulting Services Founded in 2009, PIONNIER Consulting Services operates as a research, consulting and
More informationLatest News no 1 October 2015. Subcontractor Connect
Latest News no 1 October 2015 Subcontractor Connect November 10-11 at Elmia Subcontractor, Jönköping, Sweden We welcome you to participate in the 11 th edition of Subcontractor Connect at Elmia Subcontractor
More informationSeated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationCustomer Services. More Value
Customer Services More Value < Contents 3 Levels of Operations Machine Business GF AgieCharmilles 4-5 6-7 10-11 12-13 14 CUSTOMER SERVICES more VALUE OPERATIONS SUPPORT MACHINE SUPPORT BUSINESS SUPPORT
More informationVeenstra Group Your Partner
Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance Off Shore Valves & Parts General Information Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance
More information