Curriculum Vitae. Personal information. Work experience. Surname(s) / First name(s) PERDICHIZZI ANTONIO

Transcription

1 Curriculum Vitae Personal information Surname(s) / First name(s) PERDICHIZZI ANTONIO Address UNIVERSITÀ DI BERGAMO, VIA MARCONI, 5, DALMINE (BG),ITALY Home address VIA MONTE GRAPPA, 4, PONTES. PIETRO (BG),ITALY Telephone(s) Mobile: Fax(es) Antonio.Perdichizzi@unibg.it Nationality Italian Date of birth 20 August 1948 Work experience Dates Director of Industrial Engineering Department of Bergamo University from 1/3/2003 up to 31/10/2010. Dean of the Faculty of Engineering of Bergamo University from 1/11/1996 up to 31/10/2002 Full Professor of Energy Systems in the Faculty of Engineering of Bergamo University from 1/11/1990 Associate Professor of Fluid Machinery in the Faculty of Engineering of Brescia University from 3/7/1987 up to 1/11/1990 Research Engineer in the Energy Department of Milan Politechnic from 1/8/1980 up to 3/71987 Position held Main activities and responsibilities Director of Energy Systems and Turbomachinery Section of Industrial Engineering Department, Full Professor, Research and Teaching activity Author of more than100 scientific papers in Energy Systems and Turbomachinery, published on reference journals or presented in national and international conferences. Director of several research programs funded by government institutions and industrial companies Name and address of employer Type of business or sector Università degli Studi di Bergamo Facoltà di Ingegneria Via. Marconi Dalmine (BG) Italy University Page 1/5 - Curriculum vitae of

2 Education and training Dates Graduated on March 2, Title of qualification awarded Mechanical Engineer Name and type of organization providing education and training Politecnico di Milano, University Research activity and technical competences Power Plants Gas Turbine plants: Combined Cycles optimization (efficiency and environmental impact) Combined Cycle Power Augmentation through GT inlet air cooling systems Industrial Cogeneration Plant design: optimal configuration selection vs. heat-power rate and prime mover size (gas turbine, steam turbine or reciprocating engine) Trigeneration plants to match building energy needs Power production from industrial processes heat recovery Waste to Energy plant design and modeling Renewable Energies Concentrated Solar Power Plants, CSP Solar Cooling systems : design, modeling and optimization Development of Absorption Chillers for low power and temperature applications Low Temperature Desalination Systems integrated with Absorption Chillers Heat Release Solar collector at low-mid concentration rates with orientation system: development and testing Biomass to Energy technologies: Analysis and design of conversion plants to electric power Gas Turbine Aerodynamics and Film Cooling Secondary Flows analysis in turbine cascades: wind tunnel profile testing for different operating conditions Film cooled turbine nozzle tests: aerodynamic performance and boundary layer measurements Turbine Endwall Film Cooling: thermal and aerodynamic performance analysis Cooling Systems for Automotive Applications Thermo-Fluid-dynamic measurements of Vented Brake Discs: air flow velocity field and temperature field in the relative frame to evaluate the heat transfer power Optimization of heat rejection systems for agricolture tractors, trucks and cars: under-hood components testing and design: fans, radiators and air flow path overall performance tests and detailed flow field measurements with advanced techniques Mother tongue(s) Other language(s) Italian English Page 2/5 - Curriculum vitae of

3 Relevant Research and Consulting Contracts ENERGY SYSTEMS and POWER PLANTS - ENI POWER Gas Turbine Inlet Cooling System for Combined Cycle (400 MW) (Italian Oil Company) Power Augmentation Through Thermal Storage - ENI POWER Performance Test Assistance for a 400 MW Combined Cycle - A2A Modelling and Performance Test for a 800 MW Combined Cycle - ASM Brescia Modelling and Optimization of Distric Heating Grid coupled with Waste to energy Plant - ASM Brescia 80 MW Waste to Energy Plant: Optimization of Condensing System - LOMELLINA ENERGIA 25 MW Waste to Energy Design and Performance Test - LOMELLINA ENERGIA Repowering of a 18 MW Waste to Energy plant - ENEL (Italian Electric Utility) Gas Turbine Inlet Cooling - NOY VALLESINA Cogeneration Plant Design - ITALCEMENTI Power Production from Heat Recovery of cement process in Tailand (cement factory) - TENARIS (steel mill) Power Production from Heat Recovery of steel mill process RENEWABLE ENERGY - HIDROGEST Design, Optimization and Modelling of a Solar Cooling Plant (Bergamo Municipality) (under construction) - EUROPEAN PROJECT Solar Combi Plus:Solar Heating and Cooling Plants - EUROPEAN PROJECT Hybrid Gas Turbines for the Efficient Use of Concentrated Solar Energy Project Proposal with major GT manufacturers (Siemens, MAN) and European Research Groups from EU Universities GAS TURBINE BLADING TESTS - ALSTOM POWER Performance of Film Cooled Gas Turbine Blade Cascades - ANSALDO ENERGY Performance of Film Cooled Gas Turbine Blade Cascades AUTOMOTIVE APPLICATIONS - BREMBO- FERRARI Test on high performance brake disks heat transfer Ceramic and composite disks - DUCATI Motorbikes Radiator performance tests - SAME DEUTZ Tractors Cooling System Optimization Page 3/5 - Curriculum vitae of

4 Publications Selection of more recent publications S. Ravelli, A, Perdichizzi, G. Barigozzi, CONFRONTO FRA TECNOLOGIE PER LA TERMOVALORIZZAZIONE: FORNO A LETTO FLUIDO E FORNO A GRIGLIA, 60 Congresso Nazionale ATI, Roma, settembre, G. Franchini, A. Perdichizzi, LA COGENERAZIONE NELL INDUSTRIA TESSILE: OPZIONI TECNOLOGICHE E VALUTAZIONI ECONOMICHE, IKME 2005, Milano 19 Nov G. Barigozzi, A. Perdichizzi, R. Goller, P. Pacchiana, AERO-THERMAL CHARACTERISTICS OF AN AUTOMOTIVE CCM VENTED BRAKE DISC, SAE 2005 Transactions Journal of Passenger Cars Mechanical Systems, Paper No G. Barigozzi, G. Benzoni, G. Franchini, A. Perdichizzi, FAN-SHAPED HOLE EFFECTS ON THE AERO-THERMAL PERFORMANCE OF A FILM COOLED ENDWALL, ASME Journal of Turbomachinery, Vol. 128, No.1, Jan 2006, pp G. Barigozzi, G. Franchini, A. Perdichizzi, ENDWALL FILM COOLING THROUGH FAN-SHAPED HOLES WITH DIFFERENT AREA RATIOS, ASME Paper GT , published on ASME Journal of Turbomachinery. G. Franchini, G. Nurzia, A. Perdichizzi, CHARACTERIZATION OF TESTING FACILITIES FOR SOLAR COLLECTORS, MIS MAC IX, Trieste, 24 Marzo S. Ravelli, A. Perdichizzi, Energy from RDF by means of Fluidized Bed Combustion presented at VENICE 2006, International Symposium on Waste to Energy and Biomass, Venice November G. Franchini, A. Perdichizzi, La Cogenerazione nell Industria Tessile Parte I: Opzioni Tecnologiche, Tintoria, N. 4, Aprile 2007 G. Franchini, G. Nurzia, A. Perdichizzi, Renewable cooling with solar assisted absorption chiller: system design, presented at 62 Congresso Annuale ATI, Salerno, September 11-14, 2007 F. Besana, K.T. Witte, A. Perdichizzi, G. Franchini, Heat rejection technology for solar-combi plus system, 2nd International Conference Solar Air-Conditioning, Tarragona, Spain, October 18th/19th, 2007 N. Palestra, G. Barigozzi, A. Perdichizzi Inlet Air Cooling Applied to Combined Cycle Power Plants: Influence of the Site Climate and thermal Storage Systems, ASME J. of Engineering for Gas Turbine and Power, Vol. 130, March 2008, pp N. Palestra, G. Barigozzi, A. Perdichizzi GT Inlet Air Boosting and Cooling Coupled with Cold Thermal Storage in Combined Cycle Power Plants, ASME Paper GT G.Barigozzi, A. Perdichizzi, S. Ravelli, Analisi del campo di moto a valle di un ventilatore a flusso misto per il raffreddamento del sottocofano di trattori, MIS-MAC 2008, Napoli, 28 Marzo 2008 S. Ravelli, A. Perdichizzi, G. Barigozzi Description, applications and numerical modelling of bubbling fluidized bed combustion in waste-to-energy plants, ELSEVIER, Progress in Energy and Combustion Science,, Volume 34, Issue 2, April 2008, Pages G. Barigozzi, G. Franchini, A. Perdichizzi, M. Quattrore, Endwall film cooling effects on secondary flows in a contoured endwall nozzle vane, ASME Paper GT , IGTI Turbo Expo 2008, Berlin, D, May 2008 G. Franchini, G. Nurzia, A. Perdichizzi, Combined solar heating and cooling systems: simulation and design optimization, ASME Paper ES , ASME International Solar Energy Division 2008, Jacksonville, FL, USA, August 10-14, 2008 G. Franchini, A. Perdichizzi, Cogeneration in textile industry: a key to improve energy saving and environmental impact, Proceedings of the Korean Textile Conference, Vol. 41, No. 2, pp 9-14, Daegu (Korea), October 16-17, 2008 G. Barigozzi, A. Perdichizzi, M. Donati, Combined Experimental and CFD Investigation of Brake Discs Aero-Thermal Performances, SAE Int. J. Passeng. Cars Mech.Syst. 1(1): , A. Napolitano, G. Franchini, A. Perdichizzi, W. Sparber, Design criteria for trigeneration systems coupled with solar thermal collectors, presented at 64 Congresso Annuale ATI, L'Aquila, Italy, September 8-11, 2009 G. Franchini, A. Perdichizzi, Freshwater and cooling cogeneration by solar energy presented at ISES Solar World Congress 2009, Johannesburg, South Africa, October 11-14, 2009 S. Carrara, G. Barigozzi, G. Franchini, A. Perdichizzi, Small-Scale Biomass Power Generation, ASME-ATI-UIT 2010 Conference on Thermal and Environmental Issues in Energy Systems, Sorrento, Italy, May. A. Carrara, A. Perdichizzi, G. Barigozzi Simulation of an Hydrogen Production Steam Reforming Industrial Plant for Energetic Performance Prediction Int. J. Hydrogen Energy, 35 (2010) G. Barigozzi, G. Franchini, A. Perdichizzi, M. Quattrore, Endwall Film Cooling Effects on Secondary Flows in a Contoured Endwall Nozzle Cascade, (also ASME Paper GT ), ASME J. of Turbomachinery 132 (2010), (DOI: / ). G. Barigozzi, G. Franchini, A. Perdichizzi, S. Ravelli Film Cooling of a Contoured End wall Nozzle Vane through Fan Shaped Holes, Int. J. Heat and Fluid Flow 31 (2010), G. Barigozzi, A. Perdichizzi, S. Ravelli Wet and Dry Cooling Systems Optimisation Applied to a Modern Waste-to-Energy Cogeneration Heat and Power Plant, Appl. Energy 88 (2011), (doi: /j.apenergy ). G. Barigozzi, G. Franchini, A. Perdichizzi, S. Ravelli Effects of Trenched Holes on Film Cooling of a Contoured Endwall Page 4/5 - Curriculum vitae of

5 Nozzle Vane, ASME Paper GT , accepted for publication on the ASME J. of Turbomachinery. A. Carrara, A. Perdichizzi, G. Barigozzi Pd-Ag dense membrane application to improve the energetic efficiency of an hydrogen production industrial plant Int. J. Hydrogen Energy, 36 (2011) G. Franchini, A. Perdichizzi, A. Picinardi HD desalination by heat rejected from solar cooling systems presented at IEEE EnergyCon 2010, Bahrain, December 20-22, 2010 G. Barigozzi, N. Palestra, A. Perdichizzi, G. Salvitti GT Inlet Air Cooling by Cold Thermal Storage in CC Power Plants: comparison between aero-derivative and heavy duty machines of different size, accepted for presentation at the ASME IGTI Conference, Vancouver, Canada, Page 5/5 - Curriculum vitae of