Duty Company Year Surface Plating Engineer Turkish Army Quality Control Engineer Turkish Mint
|
|
|
- Angel McDaniel
- 8 years ago
- Views:
Transcription
1 RESUME Name/Surname: BILAL DEMIREL Education: Degree Department/Program University Year Bachelor of Eng. Engineering Faculty/Chemical Eng. Gazi University 1995 Master (Msc.) Institute of Science/ Chemical Eng. Gazi University 1997 Doctorate (Ph.D) Institute of Science/ Chemical Eng. Gazi University 2001 (partly completed) Doctorate (Ph.D) Aerospace Mechanical and Manufacturing Engineering RMIT University 2009 Master (M.Sc.) Subject of Thesis and Supervisor(s): Telluric Effects on the Cathodic Protected Natural Gas Pipeline between Duzce and Black Sea Eregli Prof. Dr. Hayri YALCIN. Doctorate (Ph.D) subject of Thesis and supervisor(s): Optimization of Petaloid Base Dimensions and Process Operating Conditions to Minimize Environmental Stress Cracking in Injection Stretch Blow Molded PET Bottles. Prof. Min GU ve Dr. Fugen DAVER. Professional Experience: Duty Company Year Corrosion Engineer Kortek Engineering And Consultancy Co Surface Plating Engineer Turkish Army Quality Control Engineer Turkish Mint Research Assistant RMIT University Aerospace-Mechanical&Manufacturing Eng. Asst. Professor Bartın University Metallurgical and Material Engineering Asst. Professor Erciyes University Material Science and Engineering Master Thesis supervised: Investigation of usability of expanded polystyrene foam (EPS) material as a tile Responsibilities carried out and still being carried out in the project(s): Application of nano material mixed thin organo composite coatings on the energy transmission cables and wire industry", SAN TEZ, STZ , Researcher, 2012.
2 Metal doped PET synthesis through the condensation method and thermal resistant PET bottle production Erciyes University, Scientific Research Project, Coordinator, In the applications of thermal barrier coating (TBC) system, improving of surface properties and investigation of thermal cycle/shock behaviours of the bond coatings produced by different thermal spray methods through ball milling method, TUBITAK 1001 MAG Research project, 111M265, Coordinator, 2011/2012. Pumice Aggregated Sandwich light construct blocks and materials- POMSTRA, TR81/10 01, DPT, West Black Sea Development Agent, Researcher, Foundation of Bartın University Central Research Laboratory, DPT, Researcher, 2009/2011. Synthesis of Luminescence Material, Bartın University, Scientific Research Project, Researcher, Production of Nano composite materials in order to enhance the resistance of the polymer materials against wearing. RMIT University-Industry co-operation projesi, Researcher, Administrative Duties: Member of Bartın University Bologna Coordination Committee ( ) Bartın University foreign student coordinator ( ) Bartın University Erasmus department coordinator ( ) Erciyes University Erasmus department coordinator (2011 ) Membership in Scientific Foundations: Chemical Engineers (Turkey) Engineers of Australia Awards and scholarships: HECS Free Australian Higher Education Scholarship
3 Graduate and Post-graduate Classes Delivered in the last two years: Academic Calender Semester Fall Spring Fall Spring Subject Material Selection Processes Transport Phonomena General Chemistry Industrial Ceramics Thermodynamic Computer Programming Materials Composite Materials Polymer Technology Physical Chemistry General Chemistry PUBLICATIONS: 1. Demirel, B., Daver, F. Effects of the geometrical modification of the petaloid base on the final physical properties of the PET bottles, Journal of Applied Polymer Science 2009, Vol 114, No 6, page Demirel, B., Daver, F. Optimization of PET bottle via numerical modelling: A statistical design of experiment approach, Journal of Applied Polymer Science 2009, Vol 114, No 2, page Ilhan PEKGOZLU, Ertuğrul ERDOGMUS, Bilal DEMIREL, M. Sabri GÖK, Hakan KARABULUT, Ali Sadi BASAK, Novel UV- Emitting Phosphor: Li6CaB3O8.5: Pb2+, Journal of Luminescence 2011, Vol 131, page Ilhan PEKGOZLU, Ertuğrul ERDOGMUS, Bilal DEMIREL, Synthesis and photoluminescence properties of LiBaB9O15: Dy 3+, Journal of Material Letters (in press) 5. Daver, F., Demirel, B., Sutanto, J., Pang, C., W. An integrative simulation approach to weight reduction in Polyethylene terephthalate) bottles, Journal of Applied Polymer Science 2012, (in press). 6. Demirel, B., Daver, F. The effects of preform deformation behaviour on the final properties of the PET fruit juice bottle Journal of Applied Polymer Science 2012, (in press). 7. Demirel, B., Daver, F. Effects of preform cooling time on the final properties of the Fruit Juice PET Bottle, Journal of Applied Polymer Science, (in press) 8. Demirel, B., Yalcin, H. Investigation of telluric effects occuring on the cathodic protected natural gas pipeline between K.Eregli and Duzce, Turkish Journal of Electrical Engineering and Computer Sciences 2012, (in press).
4 9. Demirel, B., Daver, F., Yaras, A. The effects of uniform preform surface temperature on the final properties of the 1.5 litre carbonated soft drink pet bottle, Journal of Modelling and Simulation in Materials Science and Engineering (submitted) 10. Demirel, B., Yaras, A., Elcicek, H., Crystallization Behaviour of PET, Fen ve Mühendislik Dergisi, Balikesir Üniversitesi, BAÜ Fen Bil. Enst. Dergisi, Cilt 13(1) (2011) CONFERENCE PROCEEDINGS: 1. Demirel, B., Daver, F., Kosior E. Optimum design of PET bottle bases against environmental stress cracking, Conference Proceedings, 23rd Annual Meeting of the Polymer Processing Society, (PPS-23), 2007, Salvador, Brazil, Demirel, B., Daver, F., Kosior E. Petaloid bases of PET bottles: Design and process optimization against environmental stress cracking, Conference Proceedings, SPE ANTEC, 2007, Cincinnati, OH, USA, Demirel, B., Daver, F., Kosior E. The optimization of petaloid base dimensions and operating conditions for injection stretch blow moulded PET bottles, Conference Proceedings, 24th Annual Meeting of the Polymer Processing Society, (PPS-24), 2008, Salerno, Italia. 4. Pang C. Wei, Daver, F., Demirel, B., Light weight PET bottles: A simulation study, Conference Proceedings, SPE, ANTEC, 2010, Florida, USA. 5. Demirel, B., Daver, F., Yaras A. Simulation of stress in the base of the PET bottles under different processing conditions, Conference Proceedings, 6th International Advanced Technologies Symposium, 2011, Elazığ, TURKEY 6. Elcicek, H., Karaoglanli, C., Demirel, B. Corrosion problems and cathodic protection applications in navy industry, Conference Proceedings, 6th International Advanced Technologies Symposium, 2011, Elazığ, TURKEY 7. Elcicek, H., Karaoglanli, C., Demirel, B. Usage of composite materials in the marine and yacht industry, Conference Proceedings, 4th Engineering and Technology symposium, 2011, page , Ankara, TURKEY Courses Completed 1. Research Commercialization 2008 CURTIN University AUSTRALIA 2. Leadership and Communication 2006 CURTIN University AUSTRALIA 3. Project Management 2005 CURTIN University AUSTRALIA 4. Research Methods Course 2005 RMIT University AUSTRALIA
5 COMPLETED PROJECTS: Iskenderun-Malatya-Elazig Pipeline Cathodic Protection, Omerli-Dudullu-Camlica Water Drainage System Cathodic Protection, (Istanbul) İSKİ İkitelli-Halkalı Ø1200mm Steel Pipeline Cathodic Protection Project, Bozuyuk Akenerji Cogeneration System Steel Pipeline Construction and Cathodic Protection Installation, USA Ankara Embassy Fuel Oil Tank Cathodic Protection System Installation, NATO POL GROUP Presidency -6 Inch, km. Elazıg-Diyarbakir Pipeline Cathodic Protection Installation - full project (design, material selection and, installation), Cathodic Protection installation of Water Drainage Pipeline between Cubuk II Dam-Pursaklar for Water Recycling Unit Eskisehir Magnezit and Yurtbay Porcelain Factory Natural Gas Pipeline Cathodic Protection Installation, CS-2 Ambarlı Compressor Station Cathodic Protection System Installation, Bursa CS-4 Compressor Station Installation, 2000 Konya Water Pipeline Cathodic Protection Installation, 2000 Cathodic Protection of Konca Mine Jetty s Steel Poles with Al Anodes, 2001 (Golcuk) (Blue Stream) Samsun-Ankara Natural Gas Pipeline Cathodic Protection (between Russia and Turkey),
Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College
E UROPEAN CURRICULUM VITAE FORMAT PERSONAL INFORMATION Name ARSLAN Kamil (Asst. Prof. Dr.) Address Çankırı Karatekin University, Technical and Business College, 18200, Cankiri, TURKEY Telephone +90 376
Assist. Prof. Dr. Gokhan Aydin
Assist. Prof. Dr. Gokhan Aydin Karadeniz Technical University (KTU), Faculty of Engineering Department of Mining Engineering, Trabzon, Turkey Tel.: + 90 (462) 377 40 98 Fax: + 90 (462) 325 74 05 gaydin@ktu.edu.tr
: http://www.muh.istanbul.edu.tr:3500/makine/akademik2.asp?id=33
CURRICULUM VITAE Name : Yunus Ziya ARSLAN Born : February 8, 1980, Balıkesir, Turkey Citizenship : Turkish Marital status : Married Address : İstanbul Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği
Faculty of Engineering and Architecture MATERIALS SCIENCE AND ENGINEERING
MATERIALS SCIENCE AND ENGINEERING IKCU- MATERIALS SCIENCE AND ENGINEERING Materials Science and Engineering Department established in 2012 and ve the program has started taking its first students at the
Title The institution Years
Name and surname: Engin GEDİK Birth date : 12.04.1981 CV and list of the Academic Effort 1. Education Degree Department University Year Bachelor (BSc) Mechanical Education Z. Karaelmas University 2004
How To Become A Bus Driver
Hüseyin Günhan ÖZCAN Office Tel: 0 (232) 411 5000 5687 Cell Phone: 0 (533) 399 99 49 Adress: Yaşar University, Selçuk Yaşar Campus, Energy Systems Engineering Department Room No: U 217 DATE OF BIRTH: 03.21.1985
RECOVERY AND ENERGY SAVINGS OF ALUMINUM CAN BEVERAGE CONSUMED IN GENERAL AND VOCATIONAL TECHNICAL HIGH SCHOOLS
INTERNATIONAL JOURNAL OF ELECTRONICS, MECHANICAL AND MECHATRONICS ENGINEERING Volume 1. Number.1 pp.(67-73) RECOVERY AND ENERGY SAVINGS OF ALUMINUM CAN BEVERAGE CONSUMED IN GENERAL AND VOCATIONAL TECHNICAL
Departments and Specializations
Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural
Turgut Ozal University. Computer Engineering Department. TR-06010 Ankara, Turkey
Dr. YILDIRAY YALMAN Associate Professor CONTACT INFORMATION Turgut Ozal University Computer Engineering Department TR-06010 Ankara, Turkey Phone: +90 (0)312-5515437 E-mail: yyalman@turgutozal.edu.tr RESEARCH
Computational Mechanics & Manufacturing (CMM)
Graduate Program on Computational Mechanics & Manufacturing (CMM) Sakarya University Institute of Natural Sciences Computational Mechanics and Manufacturing Division 54187, Serdivan, Sakarya, TURKEY E-mail:
EDUCATION EMPLOYMENT/EXPERIENCES
Assist. Prof. Dr. Şeniz R. KUŞHAN AKIN Çankaya University Department of Material Science and Engineering Engineering Building-3, N Block B17 Yenimahalle, 06810, Ankara EDUCATION 2000-2006 Ph.D., Ceramic
CURRICULLUM VITAE. EDUCATION B. Sc. Engg. Middle East Technical University (METU), Ankara, TURKEY Yıldız Technical University, İstanbul, TURKEY
CURRICULLUM VITAE PERSONAL INFORMATION Surname, Name Address YÜKSEL, İSA BURSA TECHNICAL UNIVERSITY DEPARTMENT OF CIVIL ENGINEERING 152 EVLER MAH. EGITIM CAD. YILDIRIM YERLEŞKESI 16330, YILDIRIM, BURSA,
DEPARTMENT OF MATHEMATICS
UNIVERSITY OF PATRAS DEPARTMENT OF MATHEMATICS PROGRAM OF POSTGRADUATE STUDIES (For general information about the Department see the PROGRAM OF UNDERGRADUATE STUDIES) ACADEMIC YEAR 2005-2006 1. GENERAL
Curriculum Vitae. 01 August 1973, Gümüşhane, TURKEY. Phone : +90 352 4374901 / Ext.: 32230. : kilic@erciyes.edu.tr
Curriculum Vitae Full Name: Date & Place of Birth: Office Contact: Dr. Recai KILIÇ 01 August 1973, Gümüşhane, TURKEY. Dept. of Electrical&Electronics Eng., Faculty of Engineering, Erciyes University, Kayseri,
: Married, father of 31 years old son and 21 years old daughter
CURRICULUM VITAE Name Date of Birth Place of Birth Nationality Marital Status : Abdurrazak Öncü : July 5th1955 : Kırıkkale, : Turkish : Married, father of 31 years old son and 21 years old daughter EDUCATION
Oil and Gas Pipeline Design, Maintenance and Repair
Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg
Mehmet Burak KAYNAR Physics Engineer. Outline. Personal Information
Mehmet Burak KAYNAR Physics Engineer Hacettepe Uni. Physic Engineering Dept. SNTG Lab. Beytepe, Ankara Turkey Tel: +90 536 251 1158 Fax: +90 312 299 20 37 e-mail: bkaynar@hacettepe.edu.tr Web: http://yunus.hacettepe.edu.tr/~bkaynar/
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM 1. IS 15663(Part 1):2006 This code covers requirements and recommendations for the design, materials, construction and testing of pipelines made of steel
IV.H.2 New York State Hi-Way Initiative*
IV.H.2 New York State Hi-Way Initiative* Richard Bourgeois, P.E. General Electric Global Research 1 Research Circle Niskayuna NY 12309 Phone: (518) 387-4550; E-mail: richard.bourgeois@crd.ge.com DOE Technology
Examination sessions (two) winter session (January/February) summer session (June/July) Courses per years Year I Semester I Semester II crt.
Transilvania University of Braşov, Romania Study program: EGINEERING AND MANAGEMENT OF ADVANCED MATERIALS METALLIC, CERAMIC AND COMPOSITE Faculty MATERIALS SCIENCE and ENGINEERING Study program (Curriculum)
How To Make A Lightweight Hot Stamping
Innovative Materials and Technologies for Vehicle Construction Oliver Hoffmann, Hannover, 24.4.2012 ThyssenKrupp Group Structure 7 business areas including Steel Europe ThyssenKrupp Steel Europe Elevator
CIRICULUM VITAE 1. PERSONAL. Date of Birth-Place : March 2 nd 1984- Balikesir, Turkey
CIRICULUM VITAE 1. PERSONAL Name, Title : Derya ATAÇ, M.Sc. Date of Birth-Place : March 2 nd 1984- Balikesir, Turkey Address Phone E-mail : NanoElectronics Group (NE), MESA+ Institute for Nanotechnology,
CATHODIC PROTECTION SYSTEM DESIGN
CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of
STENCA PIPE. High quality pipe insulation. www.stenca.com
STENCA PIPE High quality pipe insulation WELCOME TO STENCA TRADING - Global focus with local service Stenca Trading offers optimal solutions for the offshore, marine, refineries and cogeneration industry.
Avoiding Burning Through: Control the Inside Surface Temperature, Not the Pressure
Originally published in the Canadian Welding Association Journal, Spring 2013, pp 30 39 Welding on In service Pipelines: Dispelling Popular Myths and Misconceptions Bill Amend Sr. Principal Engineer, Welding
Master in Condensed Matter Physics. Master académique
Master in Condensed Matter Physics Master académique 2 " A research centered university with a personal atmosphere and multicultural flair " Students at the University of Luxembourg 3 Do it like Einstein,
ORAY PREFABRICATED GSM SHELTER CONTAINERS TECHNICAL SPECIFICATIONS
GSM SHELTER CONTAINERS TECHNICAL SPECIFICATIONS ~GSM SHELTER CONTAINERS ARE PROCUDED ACCORDING TO THE DEMANDED SIZE.~ (W x L x H) Page1 GENERAL FEAUTURES Environmental Conditions : Maximum outdoor temperature
INJECTION BLOW MOLDING WITH FDM
INJECTION BLOW MOLDING WITH FDM 3D PRODUCTION SYSTEMS Time Required Cost Skill Level By Susan Sciortino, Stratasys Inc. OVERVIEW Blow molding is a manufacturing process in which air pressure inflates heated
ESER was established in 1968 under the name of Tekser Technical Services Inc. Following a change in its name in 1985, it has served its customers under the name of ESER Consulting Engineering Inc. ESER
DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program
DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE November 15-19, 2015 Pittsburgh, PA, USA Technical Program Corrosion Policy Track: Topic: Corrosion Management T.S. NAVAIR Corrosion
COMPANY PRESENTATION
Engineering and Construction Ltd. Co. COMPANY PRESENTATION Contents Preface 3 Quality Policy 5 Health and Safety Policy 6 Environmental Policy 7 Examples from our Consultation Services 8 Superstructural
TURKISH GAS NETWORK & PIPELINES RECENT DEVELOPMENTS
TURKISH GAS NETWORK & PIPELINES RECENT DEVELOPMENTS Öztürk SELVITOP Head of Department 4 th GAS FORUM 10-11 11 September 2009 Ljubljana - SLOVENIA Strategies in the Energy Sector Major Aspects Exploration
Dr. Gokhan Tunc 1 of 6. GOKHAN TUNC, Ph.D.
Dr. Gokhan Tunc 1 of 6 GOKHAN TUNC, Ph.D. İnşaat Mühendisliği Bölümü, Atılım Üniversitesi, Kızılcaşar Mah., İncek/Ankara +90 (312) 586-8355 gokhan.tunc@atilim.edu.tr EDUCATION Doctor of Philosophy (Ph.D.)
Novel biobased thermoplastic foams
Novel biobased thermoplastic foams BIOMATERIALS Towards Industrial Applications 22.5.2013 Startup Sauna, Espoo Otaniemi Tero Malm VTT Technical Research Centre of Finland 2 Outline Motivation Introduction
Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D.
OSNA -10 Copper-Nickel Lined Pipes Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D. KME Germany AG & Co. KG Copper-Nickel Lined Pipes [GB] Member of the KME Group
Dr. Paul Gramann The Madison Group Madison, WI 53719
New Dispersive and Distributive Mixers for Extrusion and Injection Molding Dr. Paul Gramann The Madison Group Madison, WI 53719 Dr. Chris Rauwendaal Rauwendaal Extrusion Engineering, Inc. Los Altos Hills,
INTERNATIONAL GRADUATE PROGRAMMES
University of Trento Department of Industrial Engineering INTERNATIONAL GRADUATE PROGRAMMES MASTERMAT - MATERIALS ENGINEERING MASTERMECH - MECHATRONICS ENGINEERING international.unitn.it/mastermat international.unitn.it/mastermech
Energy Education and Research at Carleton University. Cynthia Cruickshank April 2010
Energy Education and Research at Carleton University Cynthia Cruickshank April 2010 Energy Undergraduate Program Sustainable and Renewable Energy Engineering Undergraduate program leading to a B.Eng. Degree
The Engineering Science of Oil Pipelines
The Engineering Science of Oil Pipelines From the Keystone XL pipeline project to spills and leaks in existing lines, pipelines are in the news. The SMCC has prepared this backgrounder on crude oil and
BARIS AVAR. February 2006 July 2006: Visiting Researcher - Adam Mickiewicz University, Faculty of Physics, Poznan, Poland
BARIS AVAR Bulent Ecevit University, Department of Metallurgical and Materials Engineering, 67100 Incivez - Zonguldak/ Turkey Phone: +90 372 291 1139 Fax: +90 372 257 4023 E-Mail: barisavar@beun.edu.tr
Physical and Chemical Properties of Materials
Physical and Chemical Properties of Materials 40- to 2 50-minute sessions ACTIVITY OVERVIEW 14 L A B O R ATO R Y Students explore the properties of a wide variety of materials and examine the relationship
TECHNICAL SERVICE DEPARTMENT Technical Service Bulletin 1-800-432-8373. Anode Rods, Cathodic Protection and the Porcelain (glass) Lining
Corrosion can be defined as the destructive attack of a metal by an electrochemical reaction with its environment. Steel exposed to moisture and oxygen will rust and corrode. Corrosion is defined as the
Final Report. Period Start Date: October 1, 2000 Period End Date: September 30, 2002
Development of Advanced Drill Components for BHA Using Microwave Technology Incorporating Carbide, Diamond Composites and Functionally Graded Materials Final Report Period Start Date: October 1, 2000 Period
Metal Injection Molding (MIM) of components made of Titanium and its alloys
Metal Injection Molding (MIM) of components made of Titanium and its alloys 1 Presentation content Introduction to Metal Injection Molding (MIM) Technology - explaination Products - examples Company brief
1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
Graduate Education @ Tsinghua GAO Hong, Ph.D.
Graduate Education @ Tsinghua GAO Hong, Ph.D. Associate Dean, Graduate School, Tsinghua University A Comprehensive & Research intensive University 16 schools 56 departments Engineering Sciences Humanities
TECHNICAL DATA SHEET DURO HARD CHROME PLATING PROCESS
TECHNICAL DATA SHEET Duro hard chrome plating process is a high-speed bath which employs a special mixed soluble catalyst and has been developed to meet the modern hard chrome plating requirements. Its
15823 N. Barkers Landing Houston, TX 77079 281/556 8774 david.hendrix@hghouston.com www.hghouston.com
D a v i d E. H e n d r i x, P. E. RESUME 15823 N. Barkers Landing Houston, TX 77079 281/556 8774 david.hendrix@hghouston.com www.hghouston.com Experience: 2013 1990 President, The Hendrix Group Inc., A
TECHNICAL INFORMATION ABOUT NATURAL GAS TRANSPORT
TECHNICAL INFORMATION ABOUT NATURAL GAS TRANSPORT I / 7 Natural Gas Transport. General principle The most efficient and effective method of natural gas distribution from the place of production to the
GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014. Change in pre-requisites to Graduate standing in HDF or permission of instructor.
GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014 I. 500/600-level courses Changes: 1) College of Human Sciences and Services Human Development and Family Studies HDF 536 Family Dynamics and Health
Harsh Environment Connector Material Selection Guide
Harsh Environment Connector Material Selection Guide Introduction To ensure robust and reliable system performance, harsh environment fiber optic (HEFO) connectors must meet certain requirements. To meet
CLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
COMPANY PROFILE. AES Company, Head Quarter
AES Profile & References List COMPANY PROFILE AES is founded at 2001 with the goal of to become worldwide company in development and production of filter press and related products. AES has been successfully
CURRICULUM VITAE. 1. Name: İbrahim ERŞAN. 2. Date of Birth : 22-03-1974. 3. Academic Rank : Asst.Prof.Dr. 4. Academic Degrees: Eastern Mediterranean
CURRICULUM VITAE 1. Name: İbrahim ERŞAN 2. Date of Birth : 22-03-1974 3. Academic Rank : Asst.Prof.Dr. 4. Academic Degrees: B.Sc. M.Sc. Ph.D. Eastern Mediterranean Eastern Mediterranean Girne American
CURRICULUM VITA OF DR. RAMAZAN KAHRAMAN
CURRICULUM VITA OF DR. RAMAZAN KAHRAMAN Head of the College of Engineering Requirements Unit Professor, Chemical Engineering Department Qatar University, P.O. Box 2713, Doha, Qatar. Tel: +974 4403-4124
WEEKLY COURSE SCHEDULE : PRIMARY EDUCATION
WEEKLY COURSE SCHEDULE : PRIMARY EDUCATION Semester 1 Week 1 ( 19.09.2011-23.09.2011 ) Introduction to sol-gel processes Properties of X-Rays General Explanations on Process Planning Introduction Semester
UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017.
UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017 Part II Information on study programmes A) General description
NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI-620015
NATIONAL INSTITUTE OF TENOLOGY, TIRUIRAPPALLI-620015 Tentative Vacancy Position for SPOT Admission 2015 for M.Tech Programme Sl.No. Department Specialization Group OC OBC SC ST OCPWD OBCPWD SCPWD STPWD
CURRICULUM VITAE. Degree Area University Year PhD. Curriculum and Instruction Abant İzzet Baysal 2010 University
Title Name CURRICULUM VITAE Address Akdeniz Faculty Department of Primary School /Antalya E-mail aysenur.canbulat@gmail.com Telephone 02423104625 Fax 1. Degree Area Year PhD. Curriculum and Instruction
M Curriculum Vitae PERSONAL DATA
M Curriculum Vitae Hakan Saricayir, Ph.D. Marmara University Ataturk Education Faculty Chemistry Education Department Istanbul/TURKEY +90 532 645 58 42 (Cell) Email:hsaricayir@gmail.com hsaricayir@marmara.edu.tr
Double Degree exchange programs taught at Phelma for KTH students
Double Degree exchange programs taught at Phelma for KTH students Double Degree program for KTH students: In-coming Double Degree KTH students are registered in KTH and in Phelma, but they do not pay registration
Curriculum of the International Master degree programme. Material and Energetic Exploitation of Renewable Raw Materials (NAWARO)
Curriculum of the International Master degree programme Material and Energetic Exploitation of Renewable Raw Materials (NAWARO) Code: 066 471 University of Natural Resources and Life Sciences, Vienna Center
CHEMISTRY AND PHYSICS OF MATERIALS
International Master Programme CHEMISTRY AND PHYSICS OF MATERIALS at the Paris-Lodron University of Salzburg Non-legally binding translation of the description of the Masters Programme https://online.uni-salzburg.at/plus_online/wbmitteilungsblaetter.display?pnr=707293
Security Info Day, FP7-SEC-2011-1, 9 September 2010
MILITARY UNIVERSITY OF TECHNOLOGY WARSAW, POLAND Jerzy Malachowski, Krzysztof Damaziak Military University of Technology, Department of Mechanics and Applied Computer Science 2 Gen. Sylwestra Kaliskiego
ULUDAĞ UNIVERSITY ERASMUS POLICY STATEMENT
ULUDAĞ UNIVERSITY ERASMUS POLICY STATEMENT Bordering eight different countries from Europe, Asia, and the Middle East, Turkey has a unique and strategic geographical location forming a bridge between the
INTERNATIONAL SCIENTIFIC AND EDUCATIONAL CENTER «ARCTIC»
SCHOOL OF EGINEERING INTERNATIONAL SCIENTIFIC AND EDUCATIONAL CENTER «ARCTIC» «ICE MECHANICS» ANNUAL INTERNATIONAL WINTER COURSE VLADIVOSTOK RUSSIA RUSSIAN FAR EASTERN RESEARCH SCHOOL OF MARINE ENGINEERING
CURRICULUM VITAE. Donghyun Shin EDUCATION: RESEARCH INTERESTS: PROFESSIONAL EXPERIENCE:
CURRICULUM VITAE EDUCATION: Donghyun Shin Department of Mechanical and Aerospace Engineering The University of Texas at Arlington, Arlington, TX 76019 Tel: (817) 272-9336; Email: shin@uta.edu; Fax: (817)
Huseyin Polat s Curriculum Vitae
Huseyin Polat s Curriculum Vitae Department of Computer Engineering, Anadolu University, Eskisehir 26555, TURKEY +90 222 321 3550-6554 polath@anadolu.edu.tr http://home.anadolu.edu.tr/~polath/ Research
CURRICULUM VITAE October 5th, 2015
CURRICULUM VITAE October 5th, 2015 1. Name and surname : Selman KARAKUL 2. Date of birth : March 29th,1971 3. Academic title : Assistant Professor Home Address Bogazici C. Ozturk S. No:1 D:1 Kavacik, Beykoz/Istanbul
CURRICULUM VITAE. 1. Name Surname: Mehmet Toran 2. Date of Birth: 01.01.1980 3. Academic Degree: Assist.Prof.Dr. 4. Educational Degree:
1. Name Surname: Mehmet Toran 2. Date of Birth: 01.01.1980 3. Academic Degree: Assist.Prof.Dr. 4. Educational Degree: CURRICULUM VITAE University Date B.S Karadeniz Technical University Faculty of Education
BANU SOYLU CONTACT INFO
BANU SOYLU CONTACT INFO Address: Industrial Engineering Department Erciyes University 38039 Kayseri-Turkey Phone: +90-(352)-437-4901 ext: 32456 Fax: +90-(352)-437-5784 e-mail: bsoylu-at-erciyes.edu.tr
STUDENT NOMINATED ADAY Ö RENC
Personal information - Kiisel bilgiler STUDENT NOMINATED ADAY ÖRENC Form 0 REF.NO ET/24/3 (X) Study Information Örenim Durumu () 03/17/2008 FOR OFFICIAL USE ONLY Mr. Mohamed Bader-Eldin The General Petroleum
CSA Group Safety Standards for Oil and Gas Pipeline Systems: A Life-Cycle Approach
CSA Group Safety Standards for Oil and Gas Pipeline Systems: A Life-Cycle Approach Greg Orloff, MBA Government Relations Officer North America and Europe CSA Group Z662 Technical Committee (TC) Over 250
Secondary Containment Comparison ATI Ultra COAT vs HDPE
When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,
CURRICULUM VITAE. Position University/Institution Year
Asst. Prof. Dr. Cemali SARI CURRICULUM VITAE Address Akdeniz University Education Faculty E-mail csari@akdeniz.edu.tr Telephone 0902423102082 Fax 0902422261953 1. Education Degree Area University Year
AMERICAN SOLAR WATER HEATING SYSTEM The Best Water Heating Solution Under The Sun
AMERICAN SOLAR WATER HEATING SYSTEM The Best Water Heating Solution Under The Sun American Solar Water Heating Systems The American solar thermal system is more than just a solar water heater - it s the
ElastoFlake & ElastoTec
ElastoFlake & ElastoTec Relining Group 02 Revolutionally injection casting ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed
PAKISTANI PROFESSIONAL DEGREE B.E. (PETROLEUM & Natural GAS) with 1 st Class-1 st Position, 1991 Ph.D in PETROLEUM ENGINEERING, 2008 INSTITUTE:
Curriculum Vitae for Abdul Haque Tunio DR. ABDUL HAQUE TUNIO H.No. C-16, Kahkashan Housing Scheme, Qasimabad Hyderabad, Sindh, Pakistan Phone #. +92-22-3037290, off. 022-2771241 Fax No. +92-22-2772453,
A World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
Rubber Lining. Your guide to productive rubber lining solutions
Rubber Lining Your guide to productive rubber lining solutions Our solutions Our skilled staff and dialogue with the clients make us stand out from the other operators in the field. With solid knowledge
DIESEL EFFECT PROBLEM SOLVING DURING INJECTION MOULDING
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2014 Volume 22, Special Number DIESEL EFFECT PROBLEM SOLVING DURING INJECTION MOULDING
FACULTY OF SCIENCES Cycle Teaching Period Nature Num. of credits (T/P) Second Semi-optional 5 (4/1)
MASTER's DEGREE IN ADVANCED CHEMISTRY POSTGRADUATE DEGREE IN ADVANCED CHEMISTRY DEPARTMENT OF CHEMISTRY FACULTY OF SCIENCES UNIVERSITY OF BURGOS COURSE CODE Polymer materials: Synthesis, properties and
Composite Design Fundamentals. David Richardson
Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure
CURRICULUM VITAE. Degree Field University Year BA Economics Middle East Technical 1988 University MBA Business Administration Bilkent University 1990
CURRICULUM VITAE 1. Name: Erkan Uysal 2. Date of birth: September 1, 1965. 3. Title: Asst. Prof. Dr. 4. University Diplomas: Degree Field University Year BA Economics Middle East Technical 1988 University
THE POSSIBILITIES OF RUNNER PLACEMENTS FOR CASTINGS PRODUCED BY SPIN CASTING INTO SILICON RUBBER MOULDS. Matej BEZNÁK, Martin BAJČIČÁK, Roland ŠUBA
THE POSSIBILITIES OF RUNNER PLACEMENTS FOR CASTINGS PRODUCED BY SPIN CASTING INTO SILICON RUBBER MOULDS Matej BEZNÁK, Martin BAJČIČÁK, Roland ŠUBA Authors: Matej Beznák, Assoc. Prof. PhD., Martin Bajčičák,
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
GALVANIC CATHODIC PROTECTION 1.0 CONTENTS. 1.1 Aluminium Anodes. 1.2 Zinc Anodes. 1.3 Magnesium Anodes SECTION
SECTION 1 GALVANIC CATHODIC PROTECTION 1.0 CONTENTS 1.1 Aluminium Anodes 1.1.1 Aluminium Tank Anodes 1.1.2 Aluminium Hull Anodes 1.1.3 Aluminium Platform / Jetty Anodes 1.2 Zinc Anodes 1.2.1 Zinc Tank
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
Development of Low-cost Filling System Indispensable to Beverage Industry
65 Development of Low-cost Filling System Indispensable to Beverage Industry TANAKA DAISUKE *1 SUGIYAMA SHIGEHIRO *2 YAMAKOSHI HIDEO *3 MIZUNO MOTOHIRO *4 HARA TADASHI *5 There is a growing need for lower-cost
Laser Technology www.trio-oiltec-services.com
Laser Technology www.trio-oiltec-services.com Wear protection specialists since 1995 Leading contractor Oil & Gas industry SERVICE 24 hours 7 days a week Trio OilTec Services was founded in 1999 and became
Country University Faculty / Institute Area of Study Degree. Institution / Organization Country City Section / Unit Task Type.
BIOGRAPHY Ferhat ERÖZ Identity Number / Passport No: 43048379424 Year of Birth: 28/11/1966 Mailing Address : Phone : +90 555 219 5663 Fax : E - mail: EDUCATION INFORMATION ÇİĞDEM MAH. 1578 SOK. ARMONİ
CURRICULUM VITAE PERSONEL INFORMATION
CURRICULUM VITAE PERSONEL INFORMATION Family Name ÇETE Name MEHMET Title Ph.D. Date of Birth 1975 Place of Birth Denizli, Turkey Gender Male Marital Status Married ACADEMIC BACKGROUND & WORK EXPERIENCE
DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015
DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT Jim Riley, Texas A&M University February 10, 2015 Piping at Texas A&M 2 History of Distribution Piping at Texas A&M Concrete reinforced
Home Address : İstasyon Mah. 2335 Sk. Nu: 4B/ 6 PK: 06790 Etimesgut Ankara / Turkey. : Postponed for Academical Purposes
CURRICULUMVITAE Personal Information: Full Name Birth Date / Place : Muhammet Hakan Horzum : 26.03.1991 / Isparta Home Address : İstasyon Mah. 2335 Sk. Nu: 4B/ 6 PK: 06790 Etimesgut Ankara / Turkey Cellular
AdMaS centre Structure of the centre: Development of Advanced Building Materials Development of Advanced Structures and Technologies
AdMaS centre (Advanced Materials, Structures and Technologies) is modern science centre and complex civil engineering research institution affiliated to the Faculty of Civil Engineering, Brno University
Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
Chapter 4 Forms of energy
Chapter 4 Forms of energy Introduction This chapter compromises a set of activities that focuses on the energy sources and conversion. The activities illustrate The concept and forms of energy; The different
What Boat Captains and Marine Surveyors Should Know about Oils and Oil Analysis
What Boat Captains and Marine Surveyors Should Know about Oils and Oil Analysis Tom Johnson, President/Co-Founder JG LUBRICANT SERVICES, LLC Affiliate Member, Society of Accredited Marine Surveyors (SAMS)
SOLAR WATER PURIFICATION WITH THE HELP OF CSP TECHNOLOGY
Sci. Revs. Chem. Commun.: 3(2), 2013, 128-132 ISSN 2277-2669 SOLAR WATER PURIFICATION WITH THE HELP OF CSP TECHNOLOGY JINESH S. MACHALE *, PRACHI D. THAKUR, PIYUSH S. LALWANI and GAYATRI M. APTE Department