Mobile Admin Server Installation and Configuration Guide

Transcription

1 Mobile Admin Server Installation and Configuration Guide Version 8.1 Copyright SolarWinds Worldwide, LLC. All rights reserved worldwide. No part of this document may be reproduced by any means nor modified, decompiled, disassembled, published or distributed, in whole or in part, or translated to any electronic medium or other means without the written consent of SolarWinds. All right, title, and interest in and to the software and documentation are and shall remain the exclusive property of SolarWinds and its respective licensors. SOLARWINDS DISCLAIMS ALL WARRANTIES, CONDITIONS OR OTHER TERMS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, ON SOFTWARE AND DOCUMENTATION FURNISHED HEREUNDER INCLUDING WITHOUT LIMITATION THE WARRANTIES OF DESIGN, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT. IN NO EVENT SHALL SOLARWINDS, ITS SUPPLIERS, NOR ITS LICENSORS BE LIABLE FOR ANY DAMAGES, WHETHER ARISING IN TORT, CONTRACT OR ANY OTHER LEGAL THEORY EVEN IF SOLARWINDS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. The SolarWinds, the SolarWinds & Design, ipmonitor, LANsurveyor, Orion, and other SolarWinds marks, identified on the SolarWinds website, as updated from SolarWinds from time to time and incorporated herein, are registered with the U.S. Patent and Trademark Office and may be registered or pending registration in other countries. All other SolarWinds trademarks may be common law marks or registered or pending registration in the United States or in other countries. All other trademarks or registered trademarks contained and/or mentioned herein are used for identification purposes only and may be trademarks or registered trademarks of their respective companies. Microsoft, Windows, Hyper-V, and SQL Server are registered trademarks of Microsoft Corporation in the United States and/or other countries.

2 Table of Contents Table of Contents... 2 Introduction to Mobile Admin Server... 5 About Mobile Admin... 5 Supported Servers... 5 Mobile Admin Security... 6 Getting Started... 7 Installing the Mobile Admin Server... 8 Minimum System Requirements... 8 Where do I install the Mobile Admin Server?... 9 Mobile Admin database backup... 9 Installing the Mobile Admin Server software Licensing the Software To license the software on a computer with Internet access To license the software on a computer without Internet access To modify or deactivate the software To uninstall the Mobile Admin Server software Configuring Mobile Admin Accessing the Mobile Admin Configuration Interface Users and Servers Adding and Removing Users and Servers Managing Users Adding and Removing a User Managing Default and Specific User Permissions User Rights User License Types User Devices User Server Lists Managing Servers Adding and Removing Servers to and from the Configuration Interface

3 Managing a Server's User List Permissions Managing Default User Permissions for a Server Viewing and Modifying Server Permissions Managing Global Folders (Mobile Admin Professional Only) Creating and Removing Global Folders Adding Servers to a Global Folder Creating a Global Folder within a Global Folder Viewing the Users of a Global Folder Adding a User to a Global Folder Viewing Licenses Options About Mobile Admin Options General Options Server Options Authentication Options Novell LDAP Certificate Options Importing a Novell Certificate Viewing Imported Novell Certificate Information Removing Imported Novell Certificates from Mobile Admin Notification Options Audit Logs Browsing and Searching Audit Logs Configuring Network Access to Mobile Admin Configuring network access for BlackBerry smartphones Security without a BlackBerry Enterprise Server Configuring network access for Android and ios Devices Connecting with a VPN and/or HTTPS Connecting without a VPN or HTTPS Using Mobile Admin with a BlackBerry Enterprise Server How Mobile Admin works with a BlackBerry Enterprise Server Configuring Specialized Servers

4 Managing Microsoft servers with Mobile Admin Microsoft Windows 2008 Server To manage Microsoft Exchange To manage Microsoft ActiveSync To manage Microsoft IIS To manage a Microsoft System Center Operations Manager 2007 server To manage a Microsoft System Center Operations Manager 2012 server To manage a Microsoft System Center Mobile Device Manager server Managing BlackBerry Enterprise Servers To manage a BlackBerry Enterprise Server and above, for the Exchange and Domino platforms To manage a BlackBerry Enterprise Server 4.x for the Exchange, Domino, and GroupWise platforms Managing Backup Exec Servers Configuring the Backup Exec server Configuring the Mobile Admin server Managing IBM Lotus Domino servers To manage Lotus Domino servers Managing Citrix servers Managing Novell servers To manage Novell edirectory/nds servers

5 Introduction to Mobile Admin Server About Mobile Admin Mobile Admin allows you to manage servers and computers on your network at any time, from anywhere that you can bring your wireless device. Mobile Admin is a client-server application. The Mobile Admin Server software is typically installed on a dedicated computer or on a virtual machine that has access to all the other servers in your network that you want to manage. The Mobile Admin Client software is installed on any number of wireless devices. For more information about installing or using the Mobile Admin Client, or supported wireless devices, please see the Mobile Admin Client Installation and Usage Guide. Supported Servers You can use Mobile Admin to manage the following: SolarWinds NCM SolarWinds NPM SolarWinds NTA SolarWinds SAM SolarWinds UDT Amazon EC2 Microsoft Windows computers and networks Microsoft Active Directory Microsoft Exchange 2003, 2007, 2010 Microsoft Exchange ActiveSync (for Exchange 2007 & Exchange 2010) Microsoft SQL Server Microsoft IIS Microsoft DHCP Microsoft DNS Microsoft Cluster Servers Microsoft System Center Operations Manager Microsoft System Center Mobile Device Manager IBM Lotus Domino Novell edirectory/nds BlackBerry Enterprise Server Oracle Citrix XenApp RSA Authentication Manager HP ilo 2 & 3 Symantec BackupExec Symantec NetBackup VMware Infrastructure Nagios Core BMC Remedy Service Desk BMC Performance Manager Portal CA Service Desk Microsoft Hyper-V RDP, VNC, SSH, Telnet 5

6 Mobile Admin allows you to use your smartphone to perform a full range of administrative tasks on these servers, including managing users, groups, event logs, services, and print jobs; rebooting servers; resetting passwords; editing server documents; and deleting mailbox messages. Note: To manage Unix, Linux, AS/400, and Netware devices, routers and switches, Mobile Admin allows you to create Telnet/SSH connections. Telnet connections provide VT100, IBM 5250 and 3720 terminal emulation. SSH connections provide VT100 emulation and allow for public/private key authentication. Mobile Admin also allows you to create RDP/VNC connections to Windows, Mac OS X, Linux, Solaris, QNX and OS/2 operating systems in order to view the screen and control the keyboard and mouse of a remote computer. Mobile Admin Security There are several layers of security available for Mobile Admin, including options for both encryption and authentication. Encryption options include: Triple Data Encryption Standard (TDES) or Advanced Encryption Standard (AES) on the BlackBerry wireless network (if you are using a BlackBerry Enterprise Server with BlackBerry smartphones) Virtual Private Network (VPN) encryption (if you are using Android or ios devices) HyperText Transport Protocol - Secured (HTTPS) encryption If you are using a BlackBerry Enterprise Server, all data sent between the BlackBerry Enterprise Server and the BlackBerry are encrypted using TDES or AES. The US Government has certified TDES and AES as compliant with Federal Information Processing Standards (FIPS). Additionally, if a BlackBerry smartphone is lost, you can use the BlackBerry Enterprise Server to kill it remotely, a process that disables and erases all contents of the BlackBerry (including the Mobile Admin application). If you are using VPN, all data sent between the VPN server and these devices can be encrypted with whatever encryption method is offered by the VPN you have chosen. Mobile Admin offers the option of adding HTTPS encryption to all data sent between the Mobile Admin Server and Mobile Admin Clients. HTTPS is HTTP encrypted with the Transport Layer Security (TLS) protocol. This option is highly recommended for BlackBerry users who decide to use Mobile Admin without a BlackBerry Enterprise Server or users of any client without a VPN connection. For more information, see Configuring network access for BlackBerry smartphones, or Configuring network access for Android and ios Devices. Mobile Admin also supports RSA SecurID two-factor authentication and has been officially approved as an RSA-Certified application. This option requires users to login with their SecurID tokens before they can access Mobile Admin. For more information about using RSA SecurID Authentication, see Support for RADIUS authentication means that Mobile Admin can act as a RADIUS client or RADIUS device for whatever type of RADIUS server and authentication system you are using, such as SafeWord. Authentication options include: primary login authentication (required), from a choice of: o Windows user name and password 6

7 o Mobile Admin-specific username and password o device-level password (optional) RSA SecurID two-factor authentication (optional) (Mobile Admin Professional Only) RADIUS authentication (optional) (Mobile Admin Professional Only) Mobile Admin requires that you choose a primary form of authentication that each user must enter to log in to the Mobile Admin application, no matter what other forms of authentication (such as devicelevel, or RSA SecurID) you may have configured. You can also configure how frequently the user is required to enter the primary login authentication. For example, you can configure Mobile Admin to require the primary login every time the Mobile Admin Client is opened, or after specified time-out intervals. Getting Started To get started with Mobile Admin, perform the following in order: 1. Install the Mobile Admin Server as described in Installing the Mobile Admin Server. 2. Configure your network to allow your wireless devices to access Mobile Admin, as described in Configuring Network Access to Mobile Admin. If you are using wireless devices with a BlackBerry Enterprise Server, see Using Mobile Admin with a BlackBerry Enterprise Server instead. 3. Configure the servers in your network, if required, to work with Mobile Admin, as described in Configuring specialized servers. 4. Connect to the Mobile Admin Server through the client of your choice and go to the Configuration Interface to set up servers, users, and security, as described in Configuring Mobile Admin. 5. Install the Mobile Admin Client software on the wireless devices of the administrators in your organization. Tip: After you install and configure the Mobile Admin Server, consider sending an to all users who will be installing the Mobile Admin Client on their wireless handhelds, and provide the URL or network location of where the client software is located. 7

8 Installing the Mobile Admin Server This document provides information about how to install the Mobile Admin Server software. The Mobile Admin Server software is installed on one computer in your network. This single installation allows you to manage any number of servers in your network under the following conditions: the servers are accessible, in the network, to the Mobile Admin Server you have a valid license for each Mobile Admin user Notes: The free trial of Mobile Admin includes the ability to manage unlimited servers. If you want to run Mobile Admin with FIPS enabled, SolarWinds recommends that you enable FIPS before installing Mobile Admin. Minimum System Requirements Depending on the number of users, Mobile Admin can either be installed on an existing computer, a VM, or a dedicated server. Note: The Mobile Admin Server supports 25 concurrent users. If you expect higher numbers of concurrent users, you can deploy multiple Mobile Admin Servers. Minimum requirements for non-dedicated servers and virtual machines Software/Hardware OS Requirements Windows Server bit (recommended) Windows Server bit Windows Server 2008 R2 64-bit (recommended) Windows Server 2012 Windows XP, Windows Vista, Windows 7, and Windows 8 for trial purposes CPU Memory Disk Space Intel Pentium 4 CPU 1 GB or more 200 MB for installation 20 GB or more for optimum performance Privileges Local Admin privileges for Windows Vista or Windows 7 Server Roles Application Server Role for Windows Server 2008 and Windows Server 2008 R2.NET Framework Version 4.0 PowerShell Version 2.0 8

9 Minimum requirements for dedicated servers Software/Hardware OS Requirements Windows Server bit (recommended) Windows Server 2008 Windows Server 2008 R2 64-bit (recommended) Windows Server 2012 Windows XP, Windows Vista, Windows 7, and Windows 8 for trial purposes CPU Memory Disk Space Intel Core 2 Quad CPU, 2.66 GHz 2 GB or more 200 MB for installation 20 GB or more for optimum performance Privileges Local Admin privileges for Windows Vista or Windows 7 Server Roles Application Server Role for Windows Server 2008 and Windows Server 2008 R2.NET Framework Version 4.0 PowerShell Version 2.0 Where do I install the Mobile Admin Server? You can install the Mobile Admin Server software on any system in your network that meets the criteria listed in Minimum System Requirements above. This single installation allows you to manage any number of servers in your network. Mobile Admin database backup The SQLite database used in Mobile Admin is a flat-file database and can be backed up by backing up the database file. The Mobile Admin database, by default, can be found at C:\Program Files\Rove\Mobile Admin\db\MobileAdminDB.sqlite. If Mobile Admin is installed on a 64-bit OS, then the default database path is C:\Program Files (x86)\rove\mobile Admin\db\MobileAdminDB.sqlite. Note: To avoid possible inconsistencies in the application, when you back up the SQLite database, ensure that the Mobile Admin service is not running. 9

10 The following points need to be considered when backing up the SQLite database: Restoring and using a backup version of the SQLite database reverts the configuration and settings to reflect the configuration in effect when the backup was performed. If you attempt to back up the current version of Mobile Admin with an older version, new feature changes may not be supported. Sensitive data in the database is encrypted and can only be decrypted on the Mobile Admin Server where it was originally encrypted. Installing the Mobile Admin Server software 1. Make sure that the computer where you are installing the Mobile Admin Server software meets the minimum system requirements above. 2. Navigate to the location where you saved the Mobile Admin software, and double-click the file MobileAdminInstaller.exe. If your system responds with a security warning, click Run. 3. A popup describing software prerequisites appears. Click OK. 4. The Mobile Admin Setup window appears. Click Next. 5. Accept the End User License Agreement. Click I Agree. 6. If you do not have the prerequisite software installed, Mobile Admin prompts you to download and install the software. Select Next. 7. On the Installation Options screen, select the Help make Mobile Admin better by automatically sending usage statistics and crash reports if you wish to provide this information. Our privacy policy can be found at Once you have selected your desired options, click Next. 8. In the Choose Install Location window, browse to where you would like to install Mobile Admin, then click Next. 1. Note: If you installed Microsoft.NET 4.0 as part of the Mobile Admin installation, you may need to restart your computer. 9. In the Installation Checklist window, ensure the information is correct, then click Install. 10. Once the installation is complete, click Finish. The Mobile Admin Licensing tool opens. 11. Click Enter Licensing Information. 12. Select I have internet access and an activation key. If you cannot access the Internet from the Mobile Admin Server, see To license the software on a computer without Internet access. 13. Click the link to access the customer portal on the SolarWinds site. 14. Log on to the portal using your SolarWinds customer ID and password. You should have received this information in an sent by SolarWinds when you purchased your software. 15. Click License Management on the left navigation bar. 16. Navigate to your product, choose an activation key from the Unregistered Licenses section, and then copy the activation key. You only need to apply a single activation key. If you cannot find an activation key in the Unregistered Licenses section, contact SolarWinds customer support. 17. Return to the Activate Mobile Admin window, and then enter the activation key in the Activation Key field. 18. If you the Internet through a proxy server, click I access the internet through a proxy server, and enter its proxy address and port. 2. Note: If your computer accesses the Internet through an authenticated proxy server, complete the procedure for activating without Internet access instead. 19. Click Next. 20. Enter your address and other registration information, and then click Next. 21. After your Mobile Admin Server has been licensed, click Finish. You can then view your license status. Click Close. 10

11 22. The Mobile Admin Deployment Integrity Checklist will appear. The Checklist provides a list of potential issues. You can address the issues and rerun the Checklist. If the checklist shows the installation completed properly, click Launch to open the Mobile Admin Web Client. Licensing the Software You can license the software in one of two ways: With Internet access Without Internet access You will need a SolarWinds Customer ID (SWID) to log on to the SolarWinds Customer Portal to view your activation key. Please contact Support for your SWID or view the Licensing FAQ. To license the software on a computer with Internet access 1. If you are licensing the software as part of the installation, click Enter Licensing Information when prompted. If you are licensing the software after an evaluation period, you can access the Mobile Admin Licensing Tool by opening Start > All Programs > Mobile Admin > Mobile Admin Licensing on the Mobile Admin Server. Click Enter Licensing Information. If you are licensing the software after an evaluation period and the Mobile Admin server is installed on Windows Server 2012, you can access the Mobile Admin Licensing Tool by searching for Mobile Admin Licensing on the Mobile Admin Server. Click Enter Licensing Information. 2. Select I have internet access and an activation key. 3. Click the link to access the customer portal on the SolarWinds site. 4. Log on to the portal using your SolarWinds customer ID and password. You should have received this information in an sent by SolarWinds when you purchased your software. 5. Click License Management on the left navigation bar. 6. Navigate to your product, choose an activation key from the Unregistered Licenses section, and then copy the activation key. You only need to apply a single activation key. 7. If you cannot find an activation key in the Unregistered Licenses section, contact SolarWinds customer support. 8. Return to the Activate Mobile Admin window, and then enter the activation key in the Activation Key field. 9. If you the Internet through a proxy server, click I access the internet through a proxy server, and enter its proxy address and port. 3. Note: If your computer accesses the Internet through an authenticated proxy server, complete the procedure for activating without Internet access instead. 10. Click Next. 11. Enter your address and other registration information, and then click Next. 12. After your Mobile Admin Server has been licensed, click Finish. You can then view your license status. Click Close. To license the software on a computer without Internet access 1. If you are licensing the software as part of the installation, click Enter Licensing Information when prompted. If you are licensing the software after an evaluation period, you can access the Mobile Admin Licensing Tool by opening Start > All Programs > Mobile Admin > Mobile Admin Licensing on the Mobile Admin Server. Click Enter Licensing Information. 11

12 If you are licensing the software after an evaluation period and the Mobile Admin server is installed on Windows Server 2012, you can access the Mobile Admin Licensing Tool by searching for Mobile Admin Licensing on the Mobile Admin Server. Click Enter Licensing Information. 2. Select This server does not have internet access, and then click Next. 3. Click Copy Unique Machine ID. 4. Paste the copied data into a text editor document. 5. Transfer the document to a computer with Internet access. 6. On the computer with Internet access, complete the following steps: a. Browse to and then log on to the portal with your SolarWinds customer ID and password. b. Navigate to your product, and then click Manually Register License. c. If the Manually Register License option is not available for your product, contact SolarWinds customer support. d. Provide the Machine ID from Step 5, and then download your license key file. 7. Transfer the license key file to the Mobile Admin Server. 8. Return to the Activate Mobile Admin window, browse to the license key file, and then click Next. 9. After your Mobile Admin Server has been licensed, click Finish. You can then view your license status. Click Close. To modify or deactivate the software For information about managing your licenses for SolarWinds products, including how to deactivate or reuse a license, see SolarWinds License Manager. To uninstall the Mobile Admin Server software 1. In the Windows Control Panel, double-click Add or Remove Programs. 2. Locate Mobile Admin in the list of programs or in the Start menu, then click Remove. 3. When prompted to remove the software, click Uninstall. 4. When the system asks Do you want to remove server-specific settings and log files created by Mobile Admin?, do one of the following: You are uninstalling Mobile Admin permanently. If Then Click Yes. You are uninstalling Mobile Admin for troubleshooting purposes and plan to reinstall it. Click No. 12

13 Configuring Mobile Admin This document provides information about how to configure Mobile Admin. In order to configure Mobile Admin, you must have Mobile Admin administrator privileges. Please note that with a first-time installation of Mobile Admin, the first person to log on to Mobile Admin is given administrator privileges by default. Only an administrator can assign administrator privileges to other users. Configuring Mobile Admin can be done both from the Mobile Admin Web Interface and through your wireless device, and enables you to: manage servers, server groups, and users configure user authentication settings configure HTTPS connections for Mobile Admin import Novell certificates view license information configure default Mobile Admin Client settings view audit logs Accessing the Mobile Admin Configuration Interface You can access the Mobile Admin Configuration Interface from any computer or device through that computer or device's web browser or through the Mobile Admin application on mobile devices. For ease-of-use, the instructions below are provided assuming you are using the Mobile Admin Web Interface. All Mobile Admin configuration tasks can be carried out from any supported device. On the Actions pane on the Mobile Admin Web Interface Home Screen, click the Configuration link. 13

14 Users and Servers Adding and Removing Users and Servers Please note the all Mobile Admin users must have login rights to the Mobile Admin Server. A Mobile Admin administrator must have local admin privileges on the Mobile Admin Server. Also note that a Mobile Admin users Microsoft Windows permissions control the actions a Mobile Admin user can perform. To administer a server, you will need the appropriate rights for that server. You can configure users to be able to add or remove servers from their server list in the Mobile Admin Client. If you do not give users permission to add and remove servers from their Client server lists, each user s server list in the Mobile Admin Client will reflect exactly what is defined for them in the Configuration Interface. If you give a user permission to add or remove servers, the user can add any server to their server list from the Mobile Admin Client and it will appear in the server list in the Configuration Interface. However, if a user with permission removes a server from the Mobile Admin Client, it is only removed from the user's server list, and not from the Configuration Interface server list. Please note that the computer on which the Mobile Admin Server was installed appears in the Configuration Interface server list by default. You can remove this computer from the server list if you do not want to manage it with Mobile Admin. 14

15 Managing Users Selecting the Users option from the Configuration Interface opens the Users page. A list of users is displayed. On the menu, you will see a list of possible actions. All procedures in this section assume that you are on the Users page. Please note that by default, users are added to the Configuration Interface the first time they log in to Mobile Admin. Typically it is not necessary to manually add users in the Configuration Interface. However, if you prefer, you can manually add specific users to the Configuration Interface before they log in, and then create user lists for the different servers. Adding and Removing a User To add a user: 1. From a view of the Users page, click Add on the menu. 2. Enter information in the User Name and Domain text fields, and then click Save. To remove a user: 1. Select the user you want to remove, and click Remove on the menu. Managing Default and Specific User Permissions To manage default user permissions: 1. From a view of the Users page, click Permissions on the menu. 2. Select or clear the check boxes for the default user permissions. 3. Click Save Selections. To manage specific user permissions: 1. From a view of the user for whom you wish to manage permissions, click Permissions in the menu pane. 15

16 2. Select or clear the check boxes for the user rights. 3. Click Save Selections. User Rights 1. From a view of the Users screen, select the user for whom you wish to manage rights. 2. Select or clear the Rights check boxes. 3. Click Save. User License Types 1. From a view of the Users screen, select the user for whom you wish to change license type. 2. Select either Basics, Professional or MobileAdmin from the User Type drop-down menu. 3. Click Save. Please note that you can assign more Basics licenses than you have licensed but you cannot assign more non Basics licenses than you have licensed. If you have all of your non Basics licenses assigned and you want to change this assignment, first assign a user a Basics license then assign the unused non Basics license to a user. Different Mobile Admin features are available when using different license types. A user's assigned license type is displayed in the Mobile Admin client home screen. User Devices When a ProPlus user logs into Mobile Admin and sets up feeds, the device becomes associated with that user. The user and device association can be removed if it is no longer appropriate (ie device changes). A test notification can be sent to a device to ensure push notifications are being received. User Server Lists 1. From a view of the Users screen, select the user that you want to manage server lists for. 2. Click Servers on the menu. 3. Perform one of the following: Click Add on the menu, click in the check boxes of the servers you want to add, then click Add on the menu. Select the check boxes of the servers you want to remove, click Remove on the menu. Note: You can also manage a user s server list through the Server option on the Configuration Interface. Managing Servers Selecting the Servers option from the Configuration Interface opens the Servers page. A list of servers is displayed. In the menu, you will see a list of possible actions. All procedures in this section assume that you are on the Servers page. 16

17 Adding and Removing Servers to and from the Configuration Interface Follow this procedure in order to identify the servers that users will manage with Mobile Admin. To add a server: 1. Click Add on the menu. 2. Perform one of the following: If you know the name of the server you want to add, enter the required information in the Host Name field, then click Add. You may choose to use an Alias in addition to a Host Name. To browse the network to locate the server, click Browse Network... on the menu. Navigate to the server you want to add, and click Add on the menu. You can search the displayed network(s) for a server by clicking Find..., entering either the server name (or part thereof) or a wildcard, then clicking Find to display a list of results. Select the desired server and click Add on the Actions pane. To find the server in the network, click Browse Network... on the menu and click Find... on the Action Pane. 3. Click OK. Note: An administrator can further organize the server list in the Configuration Interface by creating user lists for individual servers. User lists do not give a user administrative access to servers, but they do determine which servers appear on the user s server list. To remove a server: 1. Select a server that you want to remove and click Remove on the menu. Note: Mobile Admin users will see the changes in the server list the next time they log in, or when they refresh the server list on their wireless device. Removing a server from the Configuration Interface also removes the server from any Global Folders that contain it. 17

18 Managing a Server's User List 1. From a view of the server that you want to manage user lists for, click Users on the menu. 2. Perform one of the following: To add a user to a server, click Add on the menu, select the user(s) you want to add and click Add on the menu. To remove a user from a server, select the user(s) you want to remove and click Remove on the menu. Note: You can also manage a server s user list through the User option on the Configuration Interface. Permissions If a user has permission to manage their server list, then when they add a server that is not already on the server list in the configuration section, the new server will appear in configuration section. If a server is removed, the changes do not appear on the server list of the configuration section.note: If a new server that you want to manage is added to the Configuration Interface server list after your first Mobile Admin Client login, you must manually add it to your server list as it will not be added automatically. Managing Default User Permissions for a Server 1. From a view of the server that you want to manage permissions for, click Permissions on the menu. 2. Select or clear the check boxes for default server permissions. 3. Click Save Selections. Viewing and Modifying Server Permissions 1. From a view of the server for which you want to view or edit permissions, click Permissions in the menu. 2. Select or clear the check boxes for server permissions. 3. Click Save Selections. Managing Global Folders (Mobile Admin Professional Only) Selecting the Global Folders option from the Configuration Interface opens the Global Folders page. A list of global folders is displayed. In the menu you will see a list of actions is displayed. Global Folders are used to organize servers. Keeping certain servers together helps to sort large numbers of servers into meaningful groups. Global Folders are accessible to any user who has permissions to any of the servers contained within them. All procedures in this section assume that you have selected Global Folders on the Configuration Interface. 18

19 Creating and Removing Global Folders To create a folder: 1. From a view of the Global Folders screen, click Add Folder on the menu. 2. Enter a name for the global folder in the Name text field on the Items pane. 3. Click Add. To remove a folder: 1. Select the folder you wish to remove and click Remove on the menu. Note: Servers contained within a global folder are not removed from Mobile Admin when the folder is removed. Adding Servers to a Global Folder 1. Select the global folder that you want to add to a server and click Add Servers on the menu. 2. Select the check boxes of the servers you want to add, and click Add on the menu. Creating a Global Folder within a Global Folder 1. Select the global folder in which you want to create a new global folder, and click Add Folder on the menu. 2. Enter a name for the global folder in the Name text field and click Add. Viewing the Users of a Global Folder 1. Select the global folder whose user list you want to view and click Users on the menu. Adding a User to a Global Folder 1. From a view of the global folder into which you want to add a user, click Users on the menu. 2. Click Add User on the menu. 3. Select the check boxes of the users you want to add, then click Add on the menu. 19

20 Viewing Licenses Selecting the Licensing option from the Configuration Interface opens the Licensing page. A list of licenses and the version number of the server is displayed. View the Licensing section on Installing the Mobile Admin Server for detailed instructions on how to activate the Mobile Admin Server. For information about managing your licenses for SolarWinds products, including how to deactivate or reuse a license, see SolarWinds License Manager. Options Selecting Options opens the Mobile Admin Options page. All procedures in this section assume that you have selected Options on the Configuration Interface, and are on the Mobile Admin Options page. 20

21 About Mobile Admin Options The Mobile Admin Configuration Options page has five options, accessible from the menu: General Server Authentication Options Novell LDAP Certificates Notification Options General Options The General Options page displays configuration options for how the Mobile Admin Client works with the Mobile Admin Server. The Advanced Settings and Restart Mobile Admin links can be found on the menu. All procedures in this section assume that you have selected General from the Mobile Admin Options page, and are on the General Options page. 21

22 Enabling and Disabling Automatic Addition of new Users after Login 1. From a view of the General Options page, select or clear the Automatically add new users after login check box. 2. Click Save. Setting a License Type for Users Added at First Login This setting determines what user license type is to be assigned to a new user added at first login. If a selected license type is not available at new user first login time then the new user is not added. 1. From a view of the General Options screen, select a license type from the list. Leave the selection blank to use available ProPlus licenses first, then use available Professional licenses when ProPlus licenses are exhausted, then use Basics licenses. Note that a user license type can be changed at any time. Enabling and Disabling User Permission to Add and Remove Servers Although you set the default for new users here, you can change whether or not a specific user is allowed to add and remove servers at any time. 1. From a view of the General Options screen, select or clear the Allow new users to add and remove servers check box to enable or disable the function. 2. Click Save. Enabling and Disabling Storing Passwords on Mobile Admin Clients Enabling Allow users to save login password on devices will result in the Mobile Admin Client showing a Save Password checkbox in the log on screen. The client Save Password checkbox is not 22

23 shown if Allow users to save login password on devices is not checked. The default setting is not checked. Managing Client Auto-Logout Settings 1. From a view of the General Options screen, enter the number of minutes of inactivity after which Mobile Admin automatically logs out a user in the Auto Logout Inactivity (Minutes) field. Entering a value of 0 disables the auto-logout feature. The default setting is Click Save. Enabling Extended Server Logging Follow this procedure to use extended server logging to temporarily collect system information for troubleshooting purposes. Because extended server logging can slow performance, only enable extended server logging when advised to do so by Rove Technical Support. Note: If you have installed the Mobile Admin server on Windows Server 2012 or Windows 8, you must log in as the domain administrator to make changes to the log levels. 1. From a view of the General Options screen, enter the number suggested to you by Rove Technical support in the Log level text field. 2. Click Save. Sending Usage Statistics and Crash Reports to Rove Follow this procedure to enable the sending of crash traces and logs to Rove. This program is completely optional. Our privacy policy can be found at 1. From a view of the General Options screen, click the Send usage statistics and crash reports to Rove check box. 2. Click Save. Changing SMTP settings Follow this procedure to enable Mobile Admin Client users to files from their handhelds using the File Explorer. 1. From a view of the General Options screen, enter the hostname of your mail server in the SMTP Server text field. 2. Click Save. Restarting the Mobile Admin Service Follow this procedure to restart the Mobile Admin service. You will be prompted to do this after certain administrative changes, or by Technical Support. 1. Click Restart Mobile Admin. 2. Click OK. 23

24 Server Options The Server Options page displays the different port and HTTPS security configuration options available for Mobile Admin. Mobile Admin offers two ports: an SSL port, and a non-ssl port. You can choose which port(s) you want to configure. The default Mobile Admin SSL and non-ssl server ports are 4055 and 4054, respectively, and can be changed according to your needs. Mobile Admin has HTTPS enabled by default, and contains an embedded HTTPS certificate. You can choose to override this certificate by providing credentials for your own HTTPS certificate. The Mobile Admin proxy service is provided to facilitate SSH/Telnet and RDP/VNC connections in network environments where direct paths between the device and the target server (such as networks with a BES) are not easily created. The proxy service is configured by an administrator, then enabled/disabled on individual clients by the user as part of their connection settings. All procedures in this section assume that you have selected Server from the Mobile Admin Options page, and are on the Server Options page. You must also configure the Mobile Admin Client to connect to the appropriate port. Opening the SSL Port, Non-SSL Port, or Both You must also open the appropriate port on your firewall, if there is one in your network. Note: If you have installed the Mobile Admin server on Windows Server 2012 or Windows 8, you must log in as the domain administrator to make changes to the ports. 24

25 1. From a view of the Server Options home screen, choose SSL Only or Non-SSL Only or Both from the Open Ports drop-down menu. 2. Click Save. Changing the Default SSL/Non-SSL Port You must also open the appropriate port on your firewall, if there is one in your network. Note: If you have installed the Mobile Admin server on Windows Server 2012 or Windows 8, you must log in as the domain administrator to make changes to the ports. 1. In the Mobile Admin SSL Server Port or Mobile Admin Non-SSL Server Port text field, enter the port number that you want Mobile Admin to use. 2. Click Save. Mobile Admin Client users must configure the new port number on their handhelds, or they will not be able to connect to the Mobile Admin Server. If you are using Mobile Admin without a BlackBerry Enterprise Server, make sure that the gateway you are using allows access to the new port number. Overriding the Default HTTPS Certificate Using a PKCS12 formatted and password protected.pfx certificate file is the best way to configure Mobile Admin to use an user selected certificate for HTTPS. The.pfx file must have the certificate private key. If you are exporting the.pfx file from secure storage on a Windows platform then make sure the "export the private key" is selected during the export process. The subject name in the certificate does not need to match the server name for the Mobile Admin Client to trust the certificate and setup a secure connection. 1. From a view of the Server Options screen, select the Override Default HTTPS check box. 2. When configuring Mobile Admin to use a PKCS12 file to enable HTTPS, the.pfx file path must be provided in the "Certificate File:" field and the password used to protect the.pfx file must be provided in the "Certificate Password:" field. The "Private Key File:" and "Private Key Password:" fields are not used when a PKCS12.pfx file is being used. 3. Click Save. Configuring the Mobile Admin Proxy Service Please note that you must also open the appropriate port on your firewall, if there is one in your network. 1. From a view of the Server Options screen, select the Enable Proxy Service check box. 2. In the Proxy Service Port field, enter the port number you want to use for the proxy. 3. Click Save. Authentication Options The Authentication Options page displays the various authentication options available for Mobile Admin. The authentication options available for Mobile Admin are: Windows Authentication RADIUS RSA SecurID 25

26 All procedures in this section assume that you have selected Authentication Options from the Mobile Admin Options page, and are on the Authentication Options page. Note: If you run Mobile Admin on a host with FIPS enabled, you cannot select RADIUS authentication. Authentication Method The Authentication Method page displays various configuration options to set up your choice of authentication. Mobile Admin requires that you choose a primary form of authentication that each user must enter to log in to the Mobile Admin application, no matter what other forms of authentication (such as device-level, or RSA SecurID) that you may configure for the user. You can configure how frequently a user is required to enter primary login authentication information. For example, you can configure Mobile Admin to require the primary login every time a user opens the Mobile Admin Client, or after time-out intervals that you specify. Choose a primary login authentication method from the following options: Windows user name and password Mobile Admin-specific username and password Windows User name and Password Authentication Administrative access to servers with Mobile Admin can be configured to use the Windows user settings for your network. With this option, users must always provide their Windows user name and password in order to login to Mobile Admin. If you choose to use the Windows settings, you can configure Mobile Admin users to have access to either exactly the same servers and services in Mobile Admin as they do in your network OR a subset of the servers and services they have permissions to manage in your network. Mobile Admin User name and Password Authentication Administrative access to servers with Mobile Admin can be configured to be specific to Mobile Admin, if you would rather not use Windows login data for Mobile Admin. Because Mobile Admin is fully integrated with Windows security, you must specify at least one Windows account for the Mobile Admin Server to use to authenticate Mobile Admin users when a user logs in with their Mobile Adminspecific username and password. If you specify one Windows account, Mobile Admin will use that as the default Windows authentication for all Mobile Admin users when they enter their Mobile Adminspecific username and password. However, for each user, you can choose to either use the default Windows account, or use any other Windows account; and further configure or limit access to specific network servers, as long as these servers are a subset of the servers that the associated Windows account has permission to manage Because of the many available choices, there are several ways to configure user access to your network if you choose to use Mobile Admin-specific passwords. The following three examples are provided to illustrate some of the possibilities. Sample configuration #1: In Mobile Admin, set up one existing Windows account as the default account for Mobile Admin with a wide range of permissions, such as a domain administrator or administrator account. In Mobile Admin, add users, and set up Mobile Admin-specific passwords for each user. In Mobile Admin, configure access for each user to an appropriate subset of network servers. 26

27 Sample configuration #2: In Windows, create a specific Windows account that has the permissions that you want all Mobile Admin users to have. In Mobile Admin, set up the new Windows account as the default account for Mobile Admin. In Mobile Admin, add users, and set up Mobile Admin-specific passwords for each. Sample configuration #3: In Windows, create a specific Windows account that has the permissions that you want most Mobile Admin users to have. In Mobile Admin, set up the new account as the default account for Mobile Admin. In Mobile Admin, add users and set up Mobile Admin-specific passwords for each. For the small number of users who you want to have different permissions than the default Windows account, configure them to use different appropriate Windows accounts to authenticate with Mobile Admin. Configuring Windows or Mobile Admin Password Authentication 1. From a view of the Authentication Options screen, click Authentication Method. 2. Select the authentication type you want from the Authentication Type drop-down menu. 3. Fill in the text fields with the required information, then click Save. RADIUS Authentication (Mobile Admin Professional and ProPlus) Mobile Admin supports the option of using RADIUS authentication, unless the Mobile Admin server is installed on a host with FIPS enabled. Support for RADIUS authentication means that Mobile Admin can act as a RADIUS client or RADIUS device for whatever type of RADIUS server and authentication system you are using, such as SafeWord. Enabling and Disabling RADIUS Authentication Follow this procedure to enable or disable RADIUS authentication for Mobile Admin. Please note By enabling RADIUS authentication, you will be automatically logged out of Mobile Admin. You will be required to enter your RADIUS login information in order to log back in. To enable RADIUS authentication: 1. From a view of the Authentication Options screen, select Radius. 2. Select the Enable RADIUS check box. 3. In the Server Name text field, enter the name or IP address of the RADIUS server 4. In the Shared Secret text field, enter the password required for the RADIUS server. 5. Click Save. To disable RADIUS authentication: 1. From a view of the Authentication Options screen, click RADIUS 2. Click to clear the Enable RADIUS check box. 3. Click Save. 27

28 RSA SecurID (Mobile Admin Professional and ProPlus) Mobile Admin supports the option of using RSA SecurID authentication and has been officially approved as an RSA-Certified application. RSA SecurID provides two-factor authentication, which requires a user to enter a combination of a secret, personal identification number (PIN) and a code from their SecurID token. The SecurID token generates a new, unpredictable code every 60 seconds. These PIN and code combinations are synchronized with the RSA Authentication Manager, which is installed on your network and controls access to RSA-protected applications and devices. If you choose to use RSA SecurID authentication with Mobile Admin, users will have to enter their PIN and SecurID code before they can log in to Mobile Admin. Enabling and Disabling RSA SecurID Authentication To enable or disable RSA authentication, the RSA security agent must be installed on the same computer as the Mobile Admin Server to enable RSA. For more information about using RSA SecurID Authentication, see Please note that by enabling RSA SecurID authentication, you will be automatically logged out of Mobile Admin. You will be required to enter your RSA SecurIDlogin information in order to log back in. To enable RSA SecurID: 1. From a view of the screen, click RSA SecurID. 2. Select the Enable RSA SecurID check box. 3. Click Save. To disable RSA SecurID: 1. From a view of the Authentication Options screen, click RSA SecurID. 2. Clear the Enable RSA SecurID check box. 3. Click Save. Novell LDAP Certificate Options All procedures in this section assume that you have selected Novell LDAP Certificates from the Mobile Admin Options page, and are on the Novell LDAP Certificates page. Importing a Novell Certificate Follow this procedure to manage Novell servers and set up an encrypted channel between the Novell server and the Mobile Admin Server. 1. From a view of the Novell LDAP Certificates screen, enter the full file path to where your certificate is stored in the Import Certificate file text field. 2. Click Import. Viewing Imported Novell Certificate Information 1. From a view of the Installed Novell Certificates screen, click the List Installed link on the menu. 2. Click a certificate name to view more details. 28