ELECTROMAGNETIC GUN Zator Srl
|
|
|
- Silas Parrish
- 10 years ago
- Views:
Transcription
1 ELECTROMAGNETIC GUN Zator Srl Via Zucchi 39/A int Cusano Milanino (MI) Italy Tel Fax
2 Gun description The electromagnetic gun DLK22LV is designed and to be installed on different types of machines operating at high speeds. Its design and versatility make it suitable for any application requiring the use of glue guns. The gun DLK22LV can be used with low and medium viscosity (2500 mpa.s max). The gun is controlled by a Zator microprocessor control or from an external control device suited for that, with the approval of Zator. The gun is composed of: an high frequency coil, a spherical tip needle, a nozzle and an armature housing where inside moves the needle. The gun is electrical controlled by coil that pull the needle open to dispense the glue and is closed by a spring to stop glue dispense. DLK 22 LV gun dispenses dots or glue lines, that depend of signal coming from the control. The drops are glue dots provided at high frequency, such as a line made of glue dots with an adjustable distance. A micrometric adjustment knob allows to optimize, without the use of tools, the size of the glue dot. Extremely reliable and easy to maintain Technical data Working pressure Glue viscosity Nozzle size Max working frequency 1.25 bar Max 2500 mpa.s from 0,3 mm to 1,5 mm 350 dots/sec Available nozzles with ceramic insert and tungsten carbide tip for applications in contact or with abrasive fluids. Zator Srl Via Zucchi 39/A int Cusano Mil. (MI) Tel 02/ Fax 02/ [email protected] 2
3 Dimensions Zator Srl Via Zucchi 39/A int Cusano Mil. (MI) Tel 02/ Fax 02/
4 Models Code B B B B B B B B B B B B B B B B B B B B B B B B B B Description Electromagnetic gun DLK 22 LV 0,3 24 Volt Electromagnetic gun DLK 22 LV 0,4 24 Volt Electromagnetic gun DLK 22 LV 0,6 24 Volt Electromagnetic gun DLK 22 LV 0,8 24 Volt Electromagnetic gun DLK 22 LV 0,4 24 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,6 24 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,7 24 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,8 24 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,3 24 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,4 24 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,6 24 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,7 24 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,8 24 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,3 6 Volt Electromagnetic gun DLK 22 LV 0,4 6 Volt Electromagnetic gun DLK 22 LV 0,6 6 Volt Electromagnetic gun DLK 22 LV 0,8 6 Volt Electromagnetic gun DLK 22 LV 0,4 6 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,6 6 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,7 6 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,8 6 Volt nozzle with tungsten carbide tip Electromagnetic gun DLK 22 LV 0,3 6 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,4 6 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,6 6 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,7 6 Volt nozzle with ceramic tip Electromagnetic gun DLK 22 LV 0,8 6 Volt nozzle with ceramic tip nozzle with tungsten carbide tip nozzle with ceramic tip Zator Srl Via Zucchi 39/A int Cusano Mil. (MI) Tel 02/ Fax 02/ [email protected] 4
5 Parts list Zator Srl Via Zucchi 39/A int Cusano Mil. (MI) Tel 02/ Fax 02/
6 Gun parts Pos Code Description 1 B Micrometric adjustment 2 K O-ring 3 B Gun dody 4 K O-ring 5 B Coil 6 V B Coil 24 V 6 K Connector 7 B Armature housing 8 B Needle LV for nozzle with ceramic tip 9 B Needle LV 10 B Spring kit 11 H Nozzle LV 0,3 mm H Nozzle LV 0,4 mm H Nozzle LV 0,5 mm H Nozzle LV 0,6 mm H Nozzle LV 0,7 mm H Nozzle LV 0,8 mm 12 H Nozzle LV 0,4 mm with tungsten carbide tip H Nozzle LV 0,6 mm with tungsten carbide tip H Nozzle LV 0,7 mm with tungsten carbide tip H Nozzle LV 0,8 mm with tungsten carbide tip 13 H Nozzle LV 0,3 mm with ceramic tip H Nozzle LV 0,4 mm with ceramic tip H Nozzle LV 0,5 mm with ceramic tip H Nozzle LV 0,6 mm with ceramic tip H Nozzle LV 0,7 mm with ceramic tip H Nozzle LV 0,8 mm with ceramic tip 14 K Fitting 15 K High pressure nipple 16 K Washer Zator Srl Via Zucchi 39/A int Cusano Mil. (MI) Tel 02/ Fax 02/ [email protected] 6
TROPHY SERIES START WITH CONFIDENCE. FINISH WITH A TROPHY. Application Versatility Robust Design Ergonomics. Start with Confidence. End with a Trophy.
TROPHY SERIES Application Versatility Robust Design Ergonomics Start with Confidence. End with a Trophy. START WITH CONFIDENCE. FINISH WITH A TROPHY. Application Versatility and Consistent Championship
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
stainless steel pre-assembled manifolds
TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
Product catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
This instruction is valid for all ACD pump models shown on page 2
Screw pumps ACD Maintenance and Service Instruction This instruction is valid for all ACD pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service intervals
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
Airless Spray Coating Technology Including Air-Assisted Airless Spray Technology
Including Air-Assisted Airless Spray Technology Concept and Theory Training Table of Contents Introduction...1 Module Overview...1 How to Use This Module...1 Airless Spray Coating Fundamentals...3 Learning
Maintenance and Service Instruction
Screw pumps E4 Maintenance and Service Instruction E4 1 IMO AB This instruction is valid for all E4 pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service
High Power Connectors for Power Supply and Power Circuits
Introduction Silver Plated Power Contacts with Contact Springs for Maximum Performance in Exposed Applications The demand for shortest possible periods of machine shut-downs and assembly times requires
HC HYDRAULIC COMPACTORS. Compacting soil, trenches and embankments with attachment compactors.
HC HYDRAULIC COMPACTORS Compacting soil, trenches and embankments with attachment compactors. Compactor attachments Hydraulic compactors are designed for compacting soil, trenches and embankments, as well
Binks Spray Gun Extensions
Binks Spray Gun Extensions Use genuine Binks Spray Gun Extensions for conventional, HVLP, airless and specialty applications EA52-100 EXTENSION INDEX Extension Type Use Page Conventional Circular Spray
HOT MELT APPLICATION. ideas, technology, performances
ideas, technology, performances : THE HEART OF WPR TECHNOLOGY WPR application systems for hot melt and hot melt PUR adhesives are specifically designed for the lamination of profiles and panels. These
BITxxPA. RF Power Amplifier. Applications. Product Description. Key Features
RF Power Amplifier Applications o RF front end o 433/868 MHz ISM band systems o Consumer Electronics o Wireless audio o Alarm and security systems o Home and building automation o Wireless sensor networks
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
Termination Procedure. FCUPC One Piece Connector
Termination Procedure (3mm/2.4mm/2mm/1.6mm) Issued By: Engineering Dept. Reviewed By: P.N. Approved By: T.M. SENKO Advanced Components, Inc. 225 Cedar Hill Street, Marlboro, MA 01752, USA Toll-free: +1-888-32-SENKO
367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
Centricut plasma torches and consumables for ESAB
plasma torches and consumables for ESAB Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT,
POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
VOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
BenchMark 460 Marking System
BenchMark460 Marking System General Arrangement Drawing SYSTEM OVERVIEW The Telesis BenchMark 460 marking system permanently prints messages into a variety of materials such as steel, aluminum, and plastic.
SAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
Original NiTO Couplings. NiTO Industrial Spray Guns. NiTO Leading supplier of high quality couplings for the professional market www.nito.
Original NiTO Couplings NiTO Industrial Spray Guns NiTO Leading supplier of high quality couplings for the professional market www.nito.com The complete Quick coupling programme from the leading manufacturer
Flow Sensors. Convenient, Reliable and Economical Flow Measurement. THORNTON Leading Pure Water Analytics
THORTO Leading Pure Water nalytics Economical Paddlewheel Hi-Purity PF Ultrasonic Vortex Insertion-type Vortex Convenient, Reliable and Economical Flow Measurement Paddlewheel Reliable and Economical Inline
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Adams. Spray Lubrication
61 S pray lubrication is a means of lubricating moving machine parts using atomised oil or grease. stream of compressed air delivers a metered quantity of the required lubricant to the point of application.
MaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Nilfisk-ALTO NEPTUNE 3 WHY COMPROMISE. Superior hot water technology and performance
Nilfisk-ALTO NEPTUNE 3 WHY COMPROMISE Superior hot water technology and performance LEADING EDGE HOT WATER PERFORMANCE AND VALUE For the simplest hot water cleaning tasks, be sure to investigate the Nilfisk-ALTO
Spray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency
Spray Guns P E R F O R M A N C E S E R I E S AUTOMATIC MANUAL TOUCH-UP Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency www.devilbiss.com
09 19 WIPER/WASHER SYSTEM
09 19 WIPER/WASHER SYSTEM LOCATION INDEX................. 09 19 2 Windshield Wiper and Washer System 09 19 2 Rear Wiper and Washer System..... 09 19 3 WIPER/WASHER SYSTEMS WIRING DIAGRAM................
ROUGHNECK II Pumpless Drain
SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
Coolflo Safe Touch Shower Mixing Valve ST20015CP
Coolflo Safe Touch Shower Mixing Valve ST20015CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
using this guide getting started catalog - product line section
getting started Building your Mold-Masters hot runner system has never been easier. This portion of the Resource Guide will familiarize you with a number of the symbols, terms and page maps that clearly
How To Make A Fuel Manager Filter/Separator
The Versatile Diesel Fuel Filtration/Water Separator System From America s Foremost Diesel Technology Innovator STANADYNE The Versatile Fuel Filtration System FOR EVERY DIESEL ENGINE, EVERY DIESEL APPLICATION
Workshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
SBC90. Abrasive Blast Cabinet Assembly & Operating Instructions
SBC90 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
MGA Alternator Conversion
MGA Alternator Conversion Installation Instructions For 1955 to 1962 MGA PART # 130-078 and #130-088 440 Rutherford St. P.O. Box 847 Goleta, CA 93117 1-800-667-7872 FAX 805-692-2525 www.mossmotors.com
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
Carbon Tech Series GS8 GS4 GS2. GASOLINE injector equipment. The only way to test Gasoline Direct injectors. 300 Bars+
GASOLINE injector equipment Carbon Tech Series The only way to test Gasoline Direct injectors GD4i GD1i 300 Bars+ Gasoline direct injection requires high pressure testing to truly diagnose operation faults.
Managing the Underfill Process in Transient Thermal Environments
IMAPS Device Packaging Conference 009 Flip Chip Track Rev 3 Managing the Underfill Process in Transient Thermal Environments Authors: Steven J Adamson, Dan Ashley, William Hassler, Jared Wilburn Asymtek,
Antenna Trainer EAN. www.edibon.com. Technical Teaching Equipment INTRODUCTION
Antenna Trainer EAN Technical Teaching Equipment Products Products range Units 3.-Communications INTRODUCTION Antennas are the main element of aerial communications. They are the transition between a transmission
1 DIY Kit #1 for (Do It Yourself chip and cracks up to 18") DIY-102 $84.95
All Windshield Repair Kits 1 DIY Kit #1 for (Do It Yourself chip and cracks up to 18") DIY-102 $84.95 2 DIY Kit #2 (Do It Yourself chip and crack repair with Dremel Drill) DIY-103 $119.95 3 Pro Kit #1
The Axial Flow Valve. Class 300/600. [email protected] www.elster-instromet.com SERIES
The Axial Flow Valve SERIES Class 300/600 [email protected] www.elster-instromet.com THE AXIAL FLOW VALVE - SERIES 300/600 A UNIQUE REGULATOR What is the Axial Flow Valve? The Axial Flow Valve
Machine needle shut-off nozzle type-a
Machine needle shut-off nozzle type-a spring operated Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Operated with one axial high performance spring Index of contents Chapter
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
TIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
RI27-J CNG REDUCER INSTALLATION PROVISIONS & WARNINGS
RI27-J CNG REDUCER INSTALLATION PROVISIONS & WARNINGS Rev.01.02 BIGAS INTERNATIONAL AUTOGAS SYSTEMS S.r.l. Via di Le Prata, 62/66-50041 Calenzano Firenze ITALY Tel. 0554211275 - Fax 0554215977 http: www.bigas.it
NAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
ACR120 Technical Specifications version 2.9 November 2005
Version 2.9 11-2005, Email: [email protected] Website: www.acs.com.hk ACR120 Contactless Reader/Writer 1.0 Introduction The ACR120 is a compact and cost-effective contactless reader and writer. It is developed
Tips and Techniques on the PR-620
Techniques and Tips on the PR-620 Learn how to demonstrate the PR-620 and make it look as easy as it really is. Topics to be covered will be: basic operation, machine threading, screen icons, merging patterns,
SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
Thermostatic element RAVV for 2-way valves
Description / Application RAVV is a self-acting thermostatic element which can be combined with 2-way valve bodies RAV-/8, VMT-/8 or VMA 15. RAVV is used to control temperatures in small hot water cylinders
Model 1210C Battery Powered Pump Shown. Description
12 Volt DC Rotary Vane Pump Series 1200C Model 1210C Battery Powered Pump Shown Description of Included Models Model Number FR1205C FR1210C FR1211C FR2410C FR2411C Description Basic 12 volt DC pump with
HSeries. High Power High Quality. Ultra-High Speed, Sensing Ionizer SJ-H Series
NEW Ultra-High Speed, Sensing Ionizer SJ-H Series High Power High Quality Suitable for high-speed static elimination in wide areas, including clean room environments HSeries The highest static elimination
A.1. a Division of Pittway Corporation. Documento: M-010.1-MGAS-ENG. Edizione: 01/1997 Rev.:
Documento: M-010.1-MGAS-ENG Edizione: 01/1997 Rev.: A.1 a Division of Pittway Corporation FRONT PANEL & VISUAL INDICATIONS GENERAL TROUBLE GENERAL PROGRAMMING IN PROGRESS ENABLE/ALARM/TROUBLE (ZONE 1 ALARM
POWER PORTABLE GENERATORS POWER. WHEN YOU NEED IT.
POWER PORTABLE GENERATORS DO IT YOURSELF LEISURE SAFETY POWER. WHEN YOU NEED IT. How to choose a generator? RATED MAX 1. Identify the power you need 2. Identify the power quality you need Before to buy
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
Pro Xp. Electrostatic Spray Guns That Deliver Expert Performance
Pro Xp Electrostatic Spray Guns That Deliver Expert Performance Experienced Painters Rely on Expert Performance Pro Xp We took our trademark, high performing Electrostatic Spray Guns and made them better.
CYMAQ Marking System AS200 + DS7050 N-14
CYMAQ Marking System AS200 + DS7050 N-14 Serial Number: 13716 CYMAQ www.cymaq.com INDEX 1. PRESENTATION AND GENERAL POINTS 1.1. General Points 1.2. Identification plate 2. MACHINE CHARACTERISTICS 2.1.
Reel Stands and Spindles
INSTRUCTION MANUAL 687 683 656 647 684 657 Reel Stands and Spindles Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
Elektra. Elektra. training. manual. manual. Coffee Grinder. Coffee Grinder SHARING THE PASSION
Elektra manual Coffee Grinder I T A L I A N E S P R E S S O C O F F E E M A C H I N E S AD: Holbein & Partners - Edition January 2006 Elektra training SHARING THE PASSION manual I T A L I A N E S P R E
FTP-627MCL353/354 #01 / #02
24V driven, FTP-607 Series 2 high speed thermal printer FTP-627MCL353/354 #01 / #02 verview The FTP-627 MCL Series are 24V driven high-speed printers with a 2-inch paper width equivalent. The FTP-627 MCL
Frequency selective monitoring and logging of environmental electromagnetic fields
FREQUENCY SELECTIVE EMF AREA MONITOR AMS-8060 Frequency selective monitoring and logging of environmental electromagnetic fields Up to 20 fully programmable frequency bands Real built-in spectrum analyser
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Standex-Meder Electronics. Custom Engineered Solutions for Tomorrow
Standex-Meder Electronics Custom Engineered Solutions for Tomorrow Reed Switch Technology Product Training Copyright 2013 Standex-Meder Electronics. All rights reserved. Introduction Purpose Discover Standex-Meder
Data Sheet. Electro-mechanical counters Hengstler 800 series
Data Pack D Issued March 00 504897 Data Sheet Electro-mechanical counters Hengstler 800 series The 800 series totalising and predetermining batch counters, manufactured by Hengstler, is available from
Cable Discharge Event
Cable Discharge Event 1.0 Introduction The widespread use of electronic equipment in various environments exposes semiconductor devices to potentially destructive Electro Static Discharge (ESD). Semiconductor
m a n u a l t é c n i c o
m a n u a l t é c n i c o Traducción técnica por Contacto.dk Traducción técnica por Contacto.dk traducción técnica por Contacto.dk Index Section I: Electrical Specifications Chapter 1: Electrical Specifications
Duct Humidity Transmitter
SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
ElectroMagnetic Induction. AP Physics B
ElectroMagnetic Induction AP Physics B What is E/M Induction? Electromagnetic Induction is the process of using magnetic fields to produce voltage, and in a complete circuit, a current. Michael Faraday
P3000 Series. Pneumatic Deadweight Testers Model P3000. Technical Data. Features
P3000 Series Pneumatic Deadweight Testers P3000 Technical Data Features Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008
Sewer Jetter GuideSM. How to Unclog Drains with Your Pressure Washer. Use this Guide To:
Sewer Jetter GuideSM How to Unclog Drains with Your Pressure Washer Use this Guide To: Learn how a sewer jetter works Find out if a sewer jetter can help solve your plumbing problem Choose the right pressure
Experimental results for the focal waveform and beam width in the focusing lens with a 100 ps filter
EM Implosion Memos Memo 51 July, 2010 Experimental results for the focal waveform and beam width in the focusing lens with a 100 ps filter Prashanth Kumar, Carl E. Baum, Serhat Altunc, Christos G. Christodoulou
ONE STAGE LIGHT OIL AND KEROSENE BURNERS
ONE STAGE LIGHT OIL AND KEROSENE BURNERS RDB SERIES RDB-R 6,8 4,6 kw RDB-R 4, 46, kw RDB.-.R, 4, kw RDB.-.R,, kw RDB,6 68,7 kw RDB. 4,, kw RDB4,7, kw The Riello RDB series of one stage light oil and kerosene
Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.
Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
MAINTENANCE MANUAL LPG CNG INJECTOR RAIL RAIL TYPE 03
MAINTENANCE MANUAL LPG CNG INJECTOR RAIL RAIL TYPE 03 December 2004 Rev. 01 Tartarini Auto S.p.a Via Bonazzi 43 40013 Castel Maggiore (Bo) Italy Tel.:+39 051 632 24 11 Fax: 051 632 24 00 E-mail: [email protected]
UNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
Ultrasonic cleaning technology and cleaning chemicals
Ultrasonics.Steam.Ultraclean. Medicine Dental Hygiene Ultrasonic cleaning technology and cleaning chemicals Developed for and matched to the requirements in the dental sector www.elma-ultrasonic.com Elmasonic
WIRELESS MAGNETIC CONTACT
WIRELESS MAGNETIC CONTACT The magnetic contact wireless MAG HCS is a sensor able to detect opening or closing doors or windows and transmits via radio a alarm signal. It is composed of two distinct elements:
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct
K&T Saw Shop 606-678-9623 or 606-561-4983
11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories www.ktoutdoor.com 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Hilger u. Kern / Dopag Group
Metering Technology Hilger u. Kern / Dopag Group The eldomix 10x is a solvent free gear metering and mixing system, used to handle low to medium viscosity multi component media such as epoxy resins, polyurethanes
Flow switches Series AD/VH
Flow switches Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight,