Ground bearing pressure. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 272 ft Luffing jib (No xx) max.

Transcription

1

2 The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight, 33,100 carbody counterweight and 220,500 lbs hook block. Total weight Ground bearing pressure approx. 242,100 lbs psi Main boom (No xx) max. length 223 ft High reach (1311.xx and 1008.xx) 272 ft Luffing jib (No xx) max. length 203 ft Max. combination boom 125 ft and luffing jib 203 ft Fixed jib (No xx) 36 ft 105 ft Auxiliary jib 53,000 lbs lifting capacity (option lbs) 1. The lifting capacities stated are valid for lifting operation only (corres ponds with crane classification according to F.E.M , crane group A1) 2. Crane standing on firm, horizontal ground. 3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted from the gross lifting capacity to obtain a net lifting value. 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity. 5. For max. wind speed please refer to lift chart in operator s cab or manual. 6. Working radii are measured from centre of swing and under load. 7. The lifting capacities are valid for 360 degrees of swing. 9. The structures are calculated according to F.E.M (pren / T2 / 1997). 10. ANSI B LR 1100 / HS 855

3 (No xx) with HD undercarriage, boom foot (), A frame, 2x lbs crane winches including wire ropes (853 ft), without basic counterweight Width 11 6 Weight in lbs 126,000 with boom foot (), A frame, 2x lbs crane winches including wire ropes (853 ft), without basic counterweight and crawlers Width 11 6 Weight in lbs 81,020 Flat track shoes 35 Width 36 Weight in lbs 22,500 () Width 4 7 Weight in lbs* 1,130 () Width 4 7 Weight in lbs* 1,940 (No ) Width 4 7 Weight in lbs* 3,400 (No ) Width 5 9 Weight in lbs* 5,180 * ) Including pendant and stay back straps for luffing jib (No xx) Width 55 Weight in lbs including pendant ropes 4,350 Length Weight in lbs* 13,600 LR 1100 / HS 855 3

4 (No xx) (No ) Width 51.1 Weight in lbs* 2,140 (No ) Width 47.2 Weight in lbs* 650 (No ) Width 47.2 Weight in lbs* 1,000 (No ) Width 47.2 Weight in lbs* 1,900 (No ) Width 5 3 Weight in lbs* 8,600 (No. 1311/ ) Width 4 7 Weight in lbs* 2,550 (No xx) (No ) Width 45 Weight in lbs* 980 (No ) Width 38 Weight in lbs* 245 (No ) Width 38 Weight in lbs* 430 * ) Including pendants (No ) Width 59 Weight in lbs* 2,050 4 LR 1100 / HS 855

5 (No xx) (No ) Width 59 Weight in lbs* 2,500 (No ) Width 59 Weight in lbs* 930 (No ) Width 59 Weight in lbs* 1,150 (No ) Width 59 Weight in lbs* 2,100 * ) Including pendants (No ) Width 5 7 Weight in lbs* 10,600 LR 1100 / HS 855 5

6 Width 33.5 Weight in lbs 3,300 Width 41.3 Weight in lbs 38,150 Width 5 5 Weight in lbs 16,500 Width Weight in lbs ,100 Width Weight in lbs 1,500 2,400 3,300 Width 16 Weight in lbs 1,300 6 LR 1100 / HS 855

7 Power rating according to ISO 9249, 536 hp at 1900 rpm Engine type Liebherr D 9408 TI E Fuel tank 211gal capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA / CARB Tier 2 and 97/68 EC Stage II The main pumps are operated by a distributor gearbox. Axial piston displacement pumps work in closed and open circuits supplying oil only when needed (flow control on demand). To minimize peak pressure an automatically working pressure cut off is integrated. This spares pumps and saves energy. The hydraulic oil is cleaned through electronically controlled pressure and return filters. Possible contamination is signalled in the cabin. The use of synthetic environmentally friendly oils is possible. Ready made hydraulic retrofit kits are available to customize requirements e.g. powering casing oscillators, auger drills etc. Working pressure max psi Oil tank capacity 217 gal Line pull (1 st layer) max. 38,600 lbs Line pull (7 th layer) 26,500 lbs Rope diameter 26 mm Drum diameter 22 inch Rope speed ft/min Rope capacity in 1 st layer 170 ft Rope capacity in 7 layers 1600 ft The winches are outstanding in their compact design and easy assembly. Propulsion is via a planetary gearbox in an oil bath. Load support by the hydraulic system; additional safety factor provided by a spring loaded, multi disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option winch with freefall system: Clutch and braking functions on the freefall system are provided by a compact designed, low wear and maintenance free multi disc brake. Propulsion through axial piston motor, hydraulically released spring loaded multi disc brake, crawler tracks, hydraulic chain tensioning device. Flat track shoes 35 inch Drive speed mph Line pull max. 23,150 lbs Rope diameter 20 mm Jib luffing 48 sec. from 15 to 78 Line pull (3 rd layer) 22,050 lbs Rope diameter 20 mm Boom up 44 sec. from 15 to 86 The control system developed and manufactured by Liebherr is designed to withstand extreme environmental conditions such as temperature, vibration and electromagnetic interference and to meet all requirements that are needed in heavy duty crane operation. Complete machine operating data are shown on a high resolution display. Standard operational information is displayed by means of graphical symbols, fault indications are displayed in plain text (more than 10 languages available). The cranes are equipped with proportional control for all main movements, which can be carried out simultaneously. A backup control system, that allows limited use of the crane is standard. This feature increases the safety and availability of the crane even further. The crane is operated with 2 multi directional joysticks, the right for winch I and boom, the left for winch II and swing control. Option: Bi directional double T levers for simultaneous boom and luffing jib operation. The crawlers are activated by the two central foot pedals. Additionally, hand levers can be attached to the pedals. Consists of rollerbearing with external teeth for lower tooth flank pressure, fixed axial piston hydraulic motor, spring loaded and hydraulically released multi disc holding brake, planetary gearbox and pinion. Swing speed from rpm continuously variable, selector for 3 speed ranges to increase swing precision. Option: Second swing drive Noise emissions correspond with 2000/14/EC directive on noise emission by equipment used outdoors. LR 1100 / HS 855 7

8 5.5 m (18 ft) No m (18 ft) No m (20 ft) No m (28 ft) No m (40 ft) No m (40 ft) No m (40 ft) No m (20 ft) No m (20 ft) No m (10 ft) No m (18 ft) No m (20 ft) No m (28 ft) No xx 12 m (40 ft) No m (10 ft) No m (40 ft) Tapered No. 1311/ m (40 ft) No m (40 ft) No m (40 ft) No m (40 ft) No m (20 ft) 6 m (20 ft) 3 m (10 ft) 3 m (10 ft) 5.5 m (18 ft) 6 m (20 ft) 6 m (20 ft) 3 m (10 ft) 5.5 m (18 ft) 6 m (20 ft) 6 m (20 ft) 3 m (10 ft) 5.5 m (18 ft) Main boom No xx 223.ft Max. combination 272 ft Max. combination 279 ft Main boom No xx 106 ft Main boom No xx 174 ft Tapered No. 1311/1008.xx 40 ft Fixed jib No xx 105 ft Luffing jib No xx 126 ft *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. 8 LR 1100 / HS 855

9 5.5 m (18 ft) No m (18 ft) No m (40 ft) No m (40 ft) No m (40 ft) No m (40 ft) No m (40 ft) No m (38 ft) No m (20 ft) No m (20 ft) No m (10 ft) No m (18 ft) No m (38 ft) No m (20 ft) No m (10 ft) No m (18 ft) No m (28 ft) No m (28 ft) No m (40 ft) No m (40 ft) No m (20 ft) 6 m (20 ft) 5.5 m (18 ft) 6 m (20 ft) 3 m (10 ft) 5.5 m (18 ft) Max. combination 328 ft Max. combination 334 ft Main boom No xx 125 ft Main boom No xx 115 ft Luffing jib No xx 203 ft Luffing jib No xx 219 ft Main boom No xx 135 ft Main boom No xx 125 ft Luffing jib No xx 144 ft Luffing jib No xx 151 ft *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. LR 1100 / HS 855 9

10 Self assembly system Unloading of basic machine (optional) Unloading and assembly of crawlers Unloading of basic machine (standard) Unloading and assembly of carbody counterweight Unloading and assembly of counterweight 10 LR 1100 / HS 855 Unloading and assembly of boom

11 Assembly of boom Reeving of hoist and jib ropes Erecting of main boom and luffing jib Working position LR 1100 / HS

12 (No xx) Auxiliary jib 53,000 lbs The maximum capacity of the auxiliary jib is 53,000 lbs. The corresponding load chart is programmed in the LMI system. (Table 1 No xx) Configuration for boom lengths (17 m 80 m) Length Amount of boom extensions Boom foot 18 ft Boom insert 10 ft* Boom insert 20 ft* Boom insert 40 ft* Boom head 28 ft Boom length (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. 12 LR 1100 / HS 855

13 (No xx) Capacities in 1000 lbs for boom lengths (46 ft 223 ft) with 26,500 lbs winches lbs counterweight and lbs carbody counterweight Boom length in (ft) Radius Radius (ft) lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs (ft) Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. LR 1100 / HS

14 (No / 1008.xx) (No xx / No xx) Configuration for L boom lengths (164 ft 272 ft) Length Amount of boom and luffing jib extensions Boom foot 18 ft Boom insert 10 ft* Boom insert 20 ft* Boom insert 40 ft* Tapered 40 ft* Luffing insert 10 ft* Luffing insert 20 ft* Luffing insert 40 ft* Luffing jib head 18 ft Max. L boom length (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. 14 LR 1100 / HS 855

15 (No / 1008.xx) Capacities in 1000 lbs 71,200 lbs counterweight and 33,100 lbs carbody counterweight L boom length in (ft) Radius (ft) lbs lbs lbs lbs Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. Capacities in 1000 lbs 71,200 lbs counterweight and 33,100 lbs carbody counterweight L boom length in (ft) Radius (ft) lbs lbs lbs lbs (No xx / No xx) Configuration for L boom lengths (203 ft 272 ft) Length Amount of boom and luffing jib extensions Boom foot 18 ft Boom insert 10 ft* Boom insert 20 ft* Boom insert 40 ft* Tapered 40 ft* Luffing insert 10 ft* Luffing insert 20 ft* Luffing insert 40 ft* Luffing jib head 18 ft Max. L boom length (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. LR 1100 / HS

16 (No xx) see table 1 on page 12 Length Amount of luffing jib extensions Luffing jib foot 18 ft Luffing jib insert 10 ft* Luffing jib insert 20 ft* Luffing jib insert 40 ft* Luffing jib head 18 ft Luffing jib length in (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. 16 LR 1100 / HS 855

17 (No xx) Radius (ft) lbs lbs lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

18 (No xx) Radius (ft) lbs lbs lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 18 LR 1100 / HS 855

19 (No xx) Radius (ft) lbs lbs lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

20 (No xx) Radius (ft) lbs lbs lbs lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 20 LR 1100 / HS 855

21 (No xx) Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

22 (No xx) see table 1 on page 12 Length Amount of luffing jib extensions Luffing jib foot 18 ft Luffing jib insert 10 ft* Luffing jib insert 20 ft* Luffing jib insert 38 ft* Luffing jib head 18 ft Luffing jib length (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 11.7 m). The figures shown above are approximate conversions to feet. 22 LR 1100 / HS 855

23 (No xx) Radius (ft) lbs lbs lbs lbs lbs lbs Radius (ft) lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

24 (No xx) Radius (ft) lbs lbs lbs lbs lbs lbs Radius (ft) lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 24 LR 1100 / HS 855

25 (No xx) Radius (ft) lbs lbs lbs lbs lbs lbs Radius (ft) lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

26 (No xx) Radius (ft) lbs lbs lbs lbs lbs Radius (ft) lbs lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 26 LR 1100 / HS 855

27 (No xx) Radius (ft) lbs lbs lbs lbs lbs Radius (ft) lbs lbs lbs lbs Radius (ft) lbs lbs Capacities in 1000 lbs with luffing jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

28 (No xx) see table 1 on page 12 Length Amount of fixed jib extensions Fixed jib foot 18 ft Fixed jib insert 10 ft* Fixed jib insert 20 ft* Fixed jib head 18 ft Fixed jib length (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m). The figures shown above are approximate conversions to feet. 28 LR 1100 / HS 855

29 (No xx) Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Capacities in 1000 lbs with fixed jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1100 / HS

30 (No xx) Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft lbs lbs lbs lbs Fixed jib length in (ft) Radius (ft) lbs lbs lbs lbs Capacities in 1000 lbs with fixed jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 30 LR 1100 / HS 855

31 C = Radius / dumping radius J = Height of boom head sheave centre above ground level Capacities in 1000 lbs for boom lengths (46 ft 95 ft) counterweight 58,000 lbs 46 ft 56 ft 66 ft 75 ft 85 ft 95 ft C J C J C J C J C J C J α ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs , , , , , , , , , , , , , , , , , , , , , , , , , ,6 11,3 Max. capacities in 1000 lbs do not exceed 75% of tipping load. Above load chart is based on use of duty cycle head and wire rope pendants. LR 1100 / HS

32 C = Radius / dumping radius J = Height of boom head sheave centre above ground level K = Length of clamshell (depending on type and capacity of bucket) Capacities in 1000 lbs for boom lengths (46 ft 95 ft) counterweight lbs 46 ft 56 ft 66 ft 75 ft 85 ft 95 ft C J C J C J C J C J C J α ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs Max. capacities in 1000 lbs do not exceed 66.7 % of tipping load. Above load chart is based on use of duty cycle head and wire rope pendants. Load diagram restricted by safety factors of standard ropes: Winches lbs Rope diameter 26 mm Min. breaking load lbs 1 rope clamshell lbs 2 rope clamshell lbs 32 LR 1100 / HS 855

33 ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏ Ï Winch options 2x lbs Line speed 1st layer (ft/min) Max. chisel weight lbs Maximum allowable weight in two rope operation lbs LR 1100 / HS

34 34 LR 1100 / HS 855

35 LR 1100 / HS

36 P.O. Box 10, A 6710 Nenzing/Austria Tel.: Fax: crawler.crane@liebherr.com LR 1100/ /2006 Subject to change without notice.