Radio / CD COACH CRC 41. Operating instructions

Transcription

1 Radio / CD COACH CRC 41 Operating instructions

2 Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Por favor, abrir Favor abrir Hier openslaan a.u.b. Öppna Åpne Avaa tästä Lütfen katl sayfay aç n z. 2

3 SUOMI NORGE FRANÇAIS ESPAÑOL NEDERLANDS SVENSKA ITALIANO PORTUGUÊS ENGLISCH DEUTSCH TÜRKÇE

4 1 FMT button, selects the FM memory levels, starts the TravelStore function 2 Infrared receiver for the IR remote control (option) 3 Volume control 4 ON button, switches the unit on/off, mute 5 RDS button, switches the RDS convenience features on/off Selects display for variable text 6 M L button, selects the MW and LW wavebands 7 Eject cassette 8 Cassette compartment 9 FR button, fast rewind : FF button, fast forward OPERATING ELEMENTS ; GEO button, sets balance and fader, resets balance of tone and volume settings < SRC button, source selection between cassette and radio - CD changer (if connected) = AUDIO button, sets bass and treble, switches loudness function on and off > Multifunction rocker switch? MENU button, opens the basic settings Keypad 1-5 A TRAFFIC button, activates/deactivates traffic information standby B Display DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SUOMI NORGE SVENSKA 25 TÜRKÇE

5 CONTENTS Important information Traffic safety Connecting additional devices (option) CODE Theft Protection Activating/deactivating the code Entering the code number Code LED Switching the car audio system on/off Switching on/off using ON button.. 29 Switching the car audio system on/off with the ignition Switching the car audio system on by inserting a cassette tape Switching the system on with the telephone (option) Switching the system on with the microphone Switching the system on with the RC-10 P IR remote control unit (option) Volume control Adjusting the tone Setting the Balance and Fader.. 33 Radio operation Switching to the radio mode Special RDS functions (AF, REG).. 34 Selecting wavebands/ memory banks Tuning into radio stations Storing radio stations Programme Type (PTY) Interference-related treble cut (HICUT) Selecting the display of variable text.. 37 Tuner switchover Traffic information Cassette mode Cassette playback Changing the playing side Fast forward/rewind Ejecting a cassette Traffic announcements in cassette mode CD Changer Operation Starting CD changer operation Selecting CDs Selecting tracks Audible fast forward/reverse (CUE/REVIEW) Quick track selection Switching the display mode Repeating individual tracks or entire CDs (REPEAT) Playing tracks in random order (MIX) Scanning all of the tracks on all of the CDs (SCAN) Interrupting playback (PAUSE) RC 10 P Remote Control Unit.. 42 External audio sources Tandem output Specifications ISO connector

6 Important information Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference. Traffic safety Traffic safety is always the top priority. Do not operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times. Consequently, you should always select a moderate volume for playing your car audio system while you are driving. IMPORTANT INFORMATION Connecting additional devices (option) You can connect additional devices to the radio: Control unit CCA 41 To use the radio as a coach system (see section entitled Tandem output ). Amplifier TA 41 To increase the volume and sound in the vehicle. Additional playback devices Such as Mini Discs, CD players, MP3 players (see section entitled External audio sources ). CD changers To play CDs. IR remote control For remotely controlling the most important functions. DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SUOMI NORGE SVENSKA 27 TÜRKÇE

7 THEFT PROTECTION CODE Theft Protection To protect your car audio system against theft, it has been equipped with a fourdigit code number. This number has to be entered each time the car audio system is disconnected from its power supply. The code inquiry is not activated for the car audio system at the factory, but you can activate it yourself. You will find the code number in the Radio Pass. Never leave the Radio Pass in your vehicle! Activating/deactivating the code To switch the code on/off, proceed as follows: Press 4 to switch the car audio system off. Press and hold down station keys 1 and at the same time. While holding down these keys, press 4 to switch the car audio system on. Continue to hold down the keys 1 and until BLAU - PUNKT appears in the display Release the keys. The coding has now been activated. Each time you switch the radio on CODE will appear briefly in the display Deactivating the code To deactivate the code, follow exactly the same steps. To ensure that unauthorized persons do not deactivate the code, you will be required to enter the code to finish the process. Entering the code number Switch on the car audio system. CODE and then 0000 will appear in the display Press station key repeatedly until the first digit of your code number appears in the display Press station key repeatedly until the second digit of your code number appears in the display Press station key repeatedly until the third digit of your code number appears in the display Press station key repeatedly until the fourth digit of your code number appears in the display When the correct code number appears in the display B, press >. If you enter the code number incorrectly three times in succession, a waiting period of one hour will go into effect. WAIT 1 H will appear in the display During this waiting period, the car audio system must remain switched on. 28

8 THEFT PROTECTION Code LED The code LED can be set to flash in key 4 when the car audio system is switched off. Switching the code LED on/off LED ON or LED OFF appears in the display To switch the LED on or off, press or >. SWITCHING ON/OFF Switching the car audio system on/off The car audio system can be switched on/off in a number of different ways. When the system is switched on, it will activate the last settings used. It will play at the volume set last. For safety reasons, a maximum switchon volume is set by the factory. Switching on/off using ON button To switch the unit on press button 4. To switch the unit off press button 4 for longer than two seconds. DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS Switching the car audio system on/off with the ignition The car audio system can be switched on and off with the ignition. To do so, do not press the ON button 4, but merely switch on the ignition. You can also switch the car audio system on when the ignition is switched off. Press down and hold 4 until the car audio system switches on. Power-off time: To prevent the car battery from running down, the radio will switch off again automatically after a certain time has elapsed (power-off time). ITALIANO NEDERLANDS SVENSKA NORGE SUOMI 29 TÜRKÇE

9 SWITCHING ON/OFF Setting the power-off time HRLOGIC appears in the display Use > to set the power-off time from STOP 0 to STOP 60 in five-minute intervals. STOP 0 means that it is not possible to operate the car radio with the ignition switched off. The default setting is 15 minutes. Switching the car audio system on by inserting a cassette tape If the system is switched off and there is no cassette in the tape deck, insert a cassette into the tape deck 8 with the open side facing towards the right until you hear it click into place. Do not use force. The audio system will switch on. Tape playback will begin. Switching the system on with the telephone (option) If you use the telephone when the system is switched off, it will switch on automatically. And when the telephone is switched off, the entire system will switch off again automatically. For this to operate correctly, the telephone must be connected to the car audio system correctly (Terminal C2). Switching the system on with the microphone If microphone 1 (driver) is activated whilst the unit is switched off, the unit will turn itself on. When the microphone is deactivated, the unit switches off automatically. This feature will only work if the microphone is connected to the unit correctly (Terminal D) using the enclosed adapter cable. If the radio is used in conjunction with control unit CCA 41 as a coach system, the microphones must be connected to the control unit (Terminal D). The control unit (CCA 41) is connected to the radio (Terminal C1) using the enclosed adapter cable. Switching the system on with the RC-10 P IR remote control unit (option) To switch on the system, press the ON button Q on the RC-10 P remote control unit. 30

10 Volume control The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum). To increase the volume, turn the volume control knob 3 to the right. To decrease the volume, turn the volume control knob 3 to the left. VOL and the set value appear on the display Mute You can reduce the volume of the car audio system immediately (mute). Press 4 briefly. Selecting the mute level It is possible to select the mute level. MUTE LVL appears in the display Press > to select the mute level. MUTE and the set value appear on the display Once you have made your selection, press MENU? twice. Outputting telephone announcements If your car audio system is equipped with a mobile telephone, it will automatically switch to mute when there is an incoming call or when you place a call and you will hear the caller via the car speakers. While the telephone call is in VOLUME CONTROL progress, this option will appear in the display This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. Outputting microphone announcements You have the option of connecting two external microphones to the unit. Microphone 1 is for use by the driver and microphone 2 for use by the tour representative. Microphone 1 always has priority over microphone 2. Audio source playback is interrupted as soon as a microphone is switched on. Audio source playback continues as soon as the microphone is switched off again. Setting the volume for microphone announcements To set the volume for microphone announcements, turn the volume control 3 in microphone mode to the left or right to either decrease or increase the volume. Adjusting beep on or off For a number of functions you will hear a beep if you press a key for a longer time. It is possible to switch off this beep. BEEP ON or BEEP OFF appears in the display To switch this function on or off, press or >. Once you have adjusted the settings, press MENU?. 31 DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA NORGE SUOMI TÜRKÇE

11 TONE Adjusting the tone Adjusting the bass To adjust the bass, press AUDIO =. BASS and the set value appear on the display Turn the volume control 3 to adjust the bass setting. Turn clockwise or anti-clockwise to raise or lower the bass. Adjusting the treble To adjust the treble, press AUDIO =. BASS and the set value appear on the display Press AUDIO = again. TREB and the set value appear on the display Turn the volume control 3 to adjust the treble setting. Turn clockwise or anti-clockwise to raise or lower the treble. Switching Loudness on/off Loudness boosts the bass and treble when the volume is low to create a more natural sound. Press AUDIO = for approx. two seconds. LD will light up in the display B to indicate that Loudness is active. Adjusting Loudness intensity The Loudness boost can be set in stages from one to six. LOUDNESS appears in the display Press or > to alter the Loudness setting. Once you have completed adjusting the settings, press MENU? twice. 32

12 Setting the Balance and Fader Adjusting the balance To adjust the balance, press GEO ;. BAL and the set value appear on the display Turn the volume control 3 to adjust the balance. Turn clockwise or anti-clockwise to shift the volume to right or left. Balance 0 = middle setting Adjusting the fader To adjust the fader settings for front/rear, press GEO ;. BAL and the set value appear on the display Press GEO ; again. FADER and the set value appear on the display Turn the volume control 3 to adjust the fader. Turn clockwise or anti-clockwise to shift the volume to front or rear. Fader 0 = middle setting The fader for front/rear cannot be set unless an additional amplifier has been connected. BALANCE AND FADER Resetting the tone and the balance and fader You can reset the tone and balance/ fader settings to zero. To reset these settings press GEO ; for longer than two seconds. AUD ZERO will appear briefly in the display DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA NORGE SUOMI 33 TÜRKÇE

13 RADIO OPERATION Radio operation This car audio system has been equipped with an RDS radio receiver. Along with their regular station programming, many FM radio stations now transmit the RDS signal, which contains such other information as the station name and the programme type (PTY). As soon as the car audio system receiver detects the station name, it will appear in the display Switching to the radio mode If you are currently using the Cassette or the CD changer, press SRC < repeatedly until RADIO appears in the display Special RDS functions (AF, REG) The special RDS functions for AF (Alternativ Frequency) and REG (Regional) enhance the performance of your car audio system. AF: If this RDS function is activated, the car audio system continuously searches in the background for the frequency with the best reception for the station you have tuned into. REG: A number of radio stations broadcast different regional programming at different times of the day. Use REG to prevent your car audio system from tuning into alternativ frequencies which might have different programming. It is necessary to activate/deactivate REG in the menu. Switching RDS functions on/off To take advantage of the RDS functions for AF and REG, press RDS 5. When the RDS functions have been activated, RDS will light up as a symbol in the display Switching REG on/off REG appears in the display OFF or ON will appear next to REG. Press or > to switch REG off or on. When the REG function is activated, the radio will try to pick up the regional programme of the station you have tuned into for as long as possible. Once you leave the station reception range, you should switch REG off. Selecting wavebands/memory banks Using this car audio system, you can tune into radio stations on the FM, MW and LW wavebands. There are three memory banks for the FM waveband and one memory bank each for MW and LW. You can store five stations in each of these memory banks. 34

14 Selecting the FM memory level To switch between the FM memory levels, press FMT 1. Selecting the MW or LW memory levels To switch between the MW and LW memory levels, press M L 6. Tuning into radio stations You can tune into radio stations in a number of different ways. Automatic seek tuning Press or >. The radio will tune into the next available station within reception range. Adjusting seek tuning sensitivity It is possible to adjust the sensitivity of the seek tuning function to tune the radio into stations with strong reception signals only, or to those with weaker reception signals as well. SENS appears in the display The currently selected setting will appear in the display SENS DX1 indicates the highest level of sensitivity, SENS LO3 the lowest. If you select SENS LO, lo will light up in the display Press > to select the desired sensitivity. Once you have made your selection, press MENU?. RADIO OPERATION Manual station selection You can also tune into radio stations manually. Press or >. You cannot use manual tuning unless the RDS function are deactivated. Paging through the broadcasting network (for FM only) If a radio broadcasting network has more than one station, you can page through the station network. Press or > to tune into the next station in the network. To take advantage of this function, you must have activated the RDS functions. It is only possible to tune into those stations which have been received once before already. To do this, start the TravelStore function or activate the automatic seek tuning function once for the entire waveband. Storing radio stations Storing radio stations manually Select the desired memory bank FM1, FM2, FMT (for FM only) or either MW or LW. Tune the radio into the desired station. Press and hold down for longer than one second one of the station preset buttons 1 to on which you want to store the radio station. 35 DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA NORGE SUOMI TÜRKÇE

15 RADIO OPERATION Storing radio stations automatically (TravelStore) You can automatically store the five radio stations with the strongest reception in your current reception area (for FM only). These stations will be stored in the FMT memory bank. Any stations stored previously in the memory bank will be deleted. Press and hold down FMT 1 for longer than two seconds. The storing process will begin. T- STORE will appear in the display After the stations have been stored, the radio will automatically begin to play the station stored on preset button 1 for the FMT memory bank. Recalling stored radio stations Select the desired station memory bank or waveband. Press the station button you used to store the desired radio station. Programme Type (PTY) In addition to the radio station name, a number of FM stations transmit information on the type of programme they broadcast. These programme types can include: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK MUSIC Using the PTY function, you can select the radio station according to the type of program being broadcast. As soon as the radio registers a radio station broadcasting the programme type selected, it will automatically switch from the station playing or the Cassette or CD changer mode to that station. Switching PTY on/off PTY ON or PTY OFF appears in the display Press or > to switch this function either on or off. Once you have made the desired setting, press MENU?. Selecting the programme type and starting seek tuning Press or >. The currently selected programme type will appear in the display If you would like to select a different programme type, press or > while the programme type is on display to switch to another programme type. The new programme type will appear briefly in the display. Press or > to start seek tuning. The next radio station broadcasting the programme selected will begin to play. If the radio is not able to find a station broadcasting the program type selected, you will hear a beep and NO PTY will 36

16 appear briefly in the display The station selected previously will then resume play. Selecting the PTY language It is possible to select the language in which the program type is displayed. PTY LANG appears in the display Press or > to select from among German, English and French. When the language you wish to activate appears in the display B, press MENU?. Special PTY alarm function As soon as a radio station broadcasts program 31, the radio will tune into this station. ALARM will appear in the display Program type 31 is reserved for disaster warnings. Interference-related treble cut (HICUT) The HICUT function improves reception when reception begins to deteriorate. If interference occurs, then the treble and the noise is cut automatically. Switching HICUT on/off HICUT appears in the display Press or > to switch HICUT on or off. RADIO OPERATION HICUT 0 indicates that the function is switched off; HICUT 1 means that the treble will be automatically cut as far as possible. The HICUT function is available for FM radio operation only. Selecting the display of variable text A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names. These variable texts will appear in the display It is possible to adjust your radio so that these variable texts do not appear. Press and hold down RDS 5 until NAME FIX appears in the display To have the variable texts displayed again, press and hold down RDS 5 until NAME VAR appears in the display Tuner switchover The car audio system has been equipped with a multiband tuner. The tuner can be adjusted to accommodate different requirements in different countries. The regions that can be selected are Europe and America. The tuner will not be completely functional until it has been adjusted to the country in which it is being operated. 37 DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA NORGE SUOMI TÜRKÇE

17 RADIO OPERATION Switching over the tuner Select the FM waveband. Switch off the car radio. Press and hold buttons 1 and and switch the radio back on again. SERVICE and the frequency waveband will then appear in the display Press > repeatedly until FM TUNER appears in the display Press > to select the EU- ROPE or AMERICA. Once you have made your selection, press MENU < twice. To end the tuner switchover, switch the radio off and then on again. TRAFFIC INFORMATION Traffic information Switching traffic information priority on/off Press TRAFFIC A. Traffic information priority is activated when TA lights up in the display You will hear a warning beep if you are listening to a radio traffic station or a cassette, leave the reception area of the traffic information station you are tuned into and the automatic seek tuning function is unable to find another traffic information station. if you switch from a traffic information station to a station which does not broadcast traffic information. Then either switch off traffic information priority or switch to a different traffic information station. Adjusting the volume for traffic announcements TAVOLUME appears in the display Press > to adjust the traffic announcement volume. Once you have adjusted the setting, press MENU? twice. 38

18 Cassette mode Cassette playback If there is no cassette in the unit yet push the cassette into the cassette compartment 8 with the open side pointing right. The cassette begins to play the side that was last played. If there is already a cassette in the unit, press the SRC button < repeatedly until CASSETTE appears on the display The cassette is played in the last set direction TRACK1 or TRACK2. Changing the playing side Press the buttons FR 9 and FF : simultaneously. This changes the direction of play. When the cassette reaches the end of one side, it automatically switches to the other (Autoreverse). Fast forward/rewind Fast forward Press the FF button : (fast forward) until it latches. FORWARD appears on the display Fast rewind CASSETTE MODE Press the FR button 9 (fast rewind) until it latches. REWIND appears on the display Stopping fast forward/rewind Press the fast button for the opposite direction. Playback is resumed. During fast forward/rewind, the radio station last listened to is heard. Ejecting a cassette Press the button 7 to remove the cassette from the unit. Traffic announcements in cassette mode With the TRAFFIC function (priority for traffic information), your car radio is on standby for traffic announcements even when a cassette is being played. When a traffic announcement begins, playback stops and the traffic announcement is made. For further information, please see the chapter Traffic information. DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA NORGE SUOMI 39 TÜRKÇE

19 CD CHANGER OPERATION CD Changer Operation (option) The CD changer CDC A08 T (24 V) can be plugged in at the ISO connector (chamber C3). Warning! If you wish to hook up the CD changer IDC A09 (12 V) to your car radio, you must first disconnect the 24 V electricity supply by unplugging the connector in the connector cable of the CD changer. The CD changer requires a separate 12 V power supply (see CD changer manual, Fig. 1). For information on how to handle CDs, how to insert CDs in the equipment and how to operate the CD changer, please refer to the CD changer operating manual. Starting CD changer operation Press SRC < repeatedly until CHANGER appears in the display Playback will begin with the first CD the changer detects in the magazine. Selecting CDs To select a CD up or down in the magazine, press or > the required number of times. Selecting tracks To select a different track on the CD currently playing, press or > the required number of times. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either > until the process begins. Quick track selection or To select a next or previous track quickly, press down and hold / > until fast forward or reverse begins. Switching the display mode To switch the display between the CD number and playing time, press MENU?. MENU will appear in the display CDC DISP appears in the display Press >. The current setting will appear, TIME for the playing time and CD NO for the CD number. Use > to select the desired setting. Press MENU? twice. Repeating individual tracks or entire CDs (REPEAT) To repeat the track currently playing, press 3 briefly. RPT TRCK will appear briefly in the display B, RPT will light up in the display 40

20 To repeat the entire CD currently playing, press 3 again. RPT DISC will appear briefly in the display B, RPT will light up in the display Stopping the REPEAT function To stop the REPEAT function for the current track or CD, press 3 repeatedly until RPT OFF appears in the display B and RPT no longer lights up. Playing tracks in random order (MIX) To play the tracks of the currently selected CD in random order, press 4 briefly. MIX-CD will appear briefly in the display B, MIX will light up in the display To play the tracks of all of the CDs in random order, press 4 again. MIX ALL will appear briefly in the display B, MIX will light up in the display Stopping the MIX function To stop the MIX function, press 4 repeatedly until MIX OFF appears in the display B and MIX no longer lights up. CD CHANGER OPERATION Scanning all of the tracks on all of the CDs (SCAN) To scan all of the tracks on all of the CDs in ascending order, press 5 SCAN will appear in the display Stopping the SCAN function To stop the SCAN function, press 5 briefly again. The track currently scanned will continue playing. It is possible to adjust the scan time. Adjusting the scan time MENU will appear in the display SCANTIME appears in the display Press > to set the scan time as desired. Once you have made your selection, press MENU? twice. The scan time selected applies to both the CD player and the CD changer. Interrupting playback (PAUSE) Press 2 ( PAUSE will appear in the display Stopping PAUSE Press 2 ( during the pause. Playback will resume. 41 DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA NORGE SUOMI TÜRKÇE

21 IR REMOTE CONTROL OPERATION RC 10 P Remote Control Unit (option) You can use the IR remote control unit to operate the most important functions of the car audio system. Remote Control Receiver In the front panel of the car audio system, there is an infrared receiver 2 for the remote control unit. Before you can use the remote control, you have to switch on the IR receiver. IR ON or IR OFF appears in the display Press or > to switch the receiver ON or OFF. Remote Control Functions Radio Operation Button Function ON Q Switching the unit on/ off Mute (press briefly) SRC I Source switch V+ K Increase volume V- J Decrease volume O M N Tuning in to preset stations Select the waveband, memory level, Travelstore (press long) Seek tuning up L Seek tuning down OK P Call/leave menu. Changing the menu using buttons L - O. M L K J I N O P Q Cassette mode ON Q Switch unit on/off Mute (press briefly) SRC I Change sources V+ K Raise volume V- J Lower volume O M N L OK P Call/leave menu. Changing the menu using buttons L - O. 42

22 IR REMOTE CONTROL OPERATION CD Changer Operation Button Function ON Q Switching the unit on/ off Mute (press briefly) SRC I Source switch V+ K Increase volume V- J Decrease volume O M N Select next track, fast seek tuning up (press long) Select previous track, fast seek tuning down (press long) Select CD, fast track selection up (press long) L Select CD, fast track selection down (press long) OK P Call/leave menu. Changing the menu using buttons L - O, activate CD Scan (press long) EXTERNAL AUDIO SOURCES External audio sources In place of the CDC-A 08 T CD changer it is also possible to connect another external audio source to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. You must activate the AUX output in the menu. If you would like to connect another external audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized dealer. Switching the AUX output on/off MENU will appear in the display Press > repeatedly until AUX OFF or AUX ON appears in the display Press or > to switch AUX on or off. Once you have completed your selections, press MENU?. If the AUX input has been switched on, you can select it by pressing SRC <. DEUTSCH ENGLISCH FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO NEDERLANDS SVENSKA SUOMI NORGE 43 TÜRKÇE

23 TANDEM OUTPUT Tandem output The unit is equipped with a tandem output (Section C1) to enable you to connect the Coach Control Amplifier CCA 41. If the tandem output is activated, the audio signal from the radio and cassette is sent to the control unit (CCA 41) at a fixed level. This allows you to set a different audio source output for the cabin and cockpit areas. In order to use the tandem output, you must first activate it in the menu. In tandem mode: if the passengers and driver are listening to a cassette, and the driver then decides to switch, for instance, to radio mode, the passengers will continue hearing cassette playback regardless. Activating / deactivating the tandem output Press the MENU button?. Repeatedly press the button > until TAND OFF or TAND ON appears in the display Press the or button > to activate / deactivate the tandem output Once you have finished making changes to the settings, press the MENU button?. Specifications SPECIFICATIONS Operating voltage 24 volts Amplifier Output power: 2 x 20 watts sinus acc. at 4 ohms Line output: 2 x 2.0 volts eff Tandem output: 4 x 2.0 volts eff Aux input: 2 x 2.0 volts eff Tuner Wavebands for Europe: FM: MHz MW : khz LW : khz Wavebands for America: FM: MHz AM : khz FM frequency response: Hz Cassette Transmission range: Hz Subject to technical modification! 44

24 ISO Connector B ISO-ANSCHLUSS SPEAKER/AMPLIFIER CONNECTOR 1 LINE OUT RIGHT (VAR) 2 LINE OUT GND (VAR) 3 SPEAKER RIGHT (+) 4 SPEAKER RIGHT (-) 5 SPEAKER LEFT (+) 6 SPEAKER LEFT (-) 7 LINE OUT LEFT (VAR) 8 LINE OUT GND (VAR) C1 CCA CONNECTOR 1 RADIO OUT LEFT (FIX) 2 RADIO OUT RIGHT (FIX) 3 RADIO/TAPE GND 4 TAPE OUT LEFT (FIX) 5 TAPE OUT RIGHT (FIX) 6 CCA ON (+12 V OUT) D C1 C2 C C B A C2 PHONE CONNECTOR 7 PHONE AF-IN 8 PHONE GND 9 PHONE REMOTE C3 CHANGER CONNECTOR 13 CDC DATA-IN 14 CDC DATA-OUT 15 CDC BATTERY (+24 V OUT) 16 CDC ON (+12 V OUT) 17 CDC GROUND/DIGITAL GND 18 CDC AF/AUX AF-GND 19 CDC AF/AUX AF-IN LEFT 20 CDC AF/AUX AF-IN RIGHT A POWER SUPPLY CONNECTOR IGNITION (+24 V) 5 ANTENNA/AMP-ON (+12 V OUT) 6 ILLUMINATION 7 BATTERY (+24 V) 8 GROUND/MINUS D MICROPHONE CONNECTOR 1 MICROPHONE 1 AF 2 MICROPHONE 1 AF GND 3 MICROPHONE 1 REMOTE 4 MICROPHONE 2 REMOTE 5 MICROPHONE 2 AF 6 MICROPHONE 2 AF GND 7 MICROPHONE 1, 2 REMOTE GND

25 Blaupunkt GmbH 08/01 TRO K7/VKD /