Group 3 Front Axle & Steering
|
|
|
- Arlene Hampton
- 7 years ago
- Views:
Transcription
1 Group 3 Front Axle & Steering Fredricks Importing, Inc. 54
2 SW-150 Steering wheel w/cap, keyed, 1500, 1600, 1700, 1900, 2000, 2200, 2210, 2210B, 2500, 2700, 3000 Repl , , WK-519 Woodruff key for SW-150 steering wheel Repl SW-420 Steering wheel w/cap, fine spline, 187, 220, 226, 1300, 1601, 1610, 1700B, 1702, 1720, YMG1800, 1802, 1820, 2000B, YMG2000, 2002, 2010, 2020, 2202, 2220, 2301, 2310, 2402, 2420, 2610, 2620, 2820, 3110, 3220, F17, FX17 Repl , S W-440 Steering wheel w/cap, coarse spline, F14, F15, F16, 140, 147, 165, 169, 1100, 1301, 1401, 1502, 1510, 1602 Repl , S W-555 Steering wheel w/cap, fine spline, F18, FX18, F20, FX20, F22, FX22, F24, FX24, FX26, FX28, FX32, F37, FX42, F46 FX285, FX305 Repl SWN-120 Steering wheel nut 140, 147, 226, 1100, 1110, 1301, 1401, 1502, 1510, 1601, 1602, 1610, 1700B, 1702, 1720, 1802, 1810, 1820, 2000B, 2002, 2010, 2020, 2202, 2220, 2301, 2310, 2402, 2610, 4300, F18, F20, F22, F24 Repl , & SWN-4130 Steering wheel nut 1500, 1600, 1700, 2000, 2200, 2210, 2210B, 2500, 2700, 3000 Repl SWN-6716 Strg wheel nut 1300 Repl (old # ) SW-4930 SW-6320 Steering wheel center cap, common to many models. A = 49.30mm Steering wheel center cap, common to many models. A = 63.20mm SCB-1511 Strg box YMG1800, YMG2000, 2010, 2020, 2210 (8) Repl SC-1515 Side cover w/bushing 1601, 1610, YM G1800, (10) YMG2000, 2010, 2210B Repl ; 1500, 1600, 1700, 1900, 2000 Repl Fredricks Importing, Inc. 55
3 SB-2616 Bushing 1500, 1700, 2000 S B-2630 Bushing 2210, 2610 SB-2637 Bushing 1500, 1700, 2000 SSS-4262 Steering sector shaft, horizontal F165D, 122, 126, 135, 135D, 140, 142, 146, 147, 186, 1300 Red, 1301, 1401, 1502, 1510, 1602 Repl , 155D, 165, 165D Repl SSS-4310 Steering sector shaft, horizontal 187, 195D, 220, 226, 240D, 1601, 1610, 1700D, YMG1800, 1802, 1810, YMG2000, 2001, 2002, 2202, 2210, 2210B, 2220, 2301, 2310, 2402, 2420 Repl SSS-4740 Steering sector shaft, horizontal 195 2wd, 240 2wd, 1500, 1600, 1700, 1900, 2000, 2200, 2700 Repl SSS-4145 Steering sector shaft, horizontal 330, 2500, 2610, 2620, 2820, 3000, 3110, 3810 Repl (old # ) 26x38x7TC Strg output shaft seal 135, 155, 165, 169, new 186, 195, 226, 240, 1500, 1600, 1601, 1610, 1700, YMG1800, 1900, 2000, YMG2000, 2010, 2020, 2200, 2210, 2220, 2310, 2420, F17, FX17 Repl x35x8TC Strg output shaft seal 122, 126, 140, 142, 146, 147, old 186, 1301, 1401, 1502, 1510, 1602, F14, F15, FF145D, FF155D, F165D Repl (old # ) SBS-4080 Strg output shaft seal 330, 2500, 2610, 2620, 2820, 3000, F20, FX20, F24, FX24, F255, FX255 Repl S BS-4454 Strg output shaft seal (power steering only) F20D, FX20D, F255D Repl Fredricks Importing, Inc. 56
4 SC-1550 Steering shaft w/ worm gear 195, 240, 1500, 1600, 1700, 1900 (A) 2000, 2200, 2210, 2700 Repl (Brgs not include d) SC-2500 Steering shaft w/worm gear 330, 2500, 3000 (A) Repl (Brgs not include d) 2610 Repl (Re q. purchase of SW-150 strg wheel) WK-519 SC-4166 Woodruff key for SC-1550 & SC-2500 strg column Repl Steering shaft w/worm gear (2-pc)1601, 1610, YMG1800, (A) 1802, 1810, 1820, YMG2000, 2001, 2002, 2010, 2020, 2202, 2220, 2301, 2310, 2402, 2420 Repl ; 2210, 2210B Repl (Brgs not include d) SC-4440 Steering shaft w/worm gear (2-pc) 140, 147, old 186, (A) 1401, 1510, F175 Repl (Brgs not include d) SC-4340 Steering shaft w/worm gear 165, 155 (A) Repl & (Brgs not include d) 135, 1100, 1300 Red Repl (Re q. purchase of SW-440 stee ring wheel) SB-750 Steering column brg. (2 per column) 135, 155, 165, 169, 180, (B) New 186, 187, 195, 220, 226, 240, 250, 1500, 1600, 1601, 1610, 1700D, 1702, 1720, YMG1800, 1802, 1810, 1820, 2000, YMG2000, 2001, 2002, 2010, 2020, 2200, 2202, 2210, 2220, 2301, 2310, 2402, 2420, F17, FX17, F18, FX18 Repl SB-4145 Steering column bearing (2 per column) 276, 330, 330D, 1300, 2500, (B) 2610, 2620, 2820, 3000, 3110, F20, FX20, F24, FX24, F215, FX215, F235, FX235, F255, FX255, F265, FX265 Repl SB-262 Steering column bearing (2 per column) F14, F15, (B) F16, 122, 126, 135, 140, 142, 146, 147, old 186, 1100, 1301, 1401, 1502, 1510, 1602, FF145D, FF155D, F165D Repl SCG-42 Steering column grommet 195, 240, 1601, 1610, 1700, (5) 1702, 1802, 2000, 2002, 2210, 2310, 2500, 3000, 3810 Repl & SCS-1 Strg column shim 0.1 thick Repl (3) SCS-2 Strg column shim 0.2 thick Repl (3) SCS-3 Strg column shim 0.3 thick (3) Fredricks Importing, Inc. 57
5 SC-4190 Strg column tube, includes # 2, 1500, 1700, 2000 (4) Repl AS-1363 Front axle hsg collar F16D, F17D, FX17D, F18D, (1) FX18D, FF145D, FF155D, F165D, F195D, FX195D, 140D, 147D, 169D Repl AS-4306 Front axle hsg sleeve F16D, F17D, FX17D, (2) F18D, FX18D, FF145D, FF155D, F165D, F195D, FX195D, 140D, 147D, 169D Repl x57x11.5TC Front axle hsg seal F14D, F15D, F16D, F17D, (2A) F18D, FX18D, FF145D, FF155D, F165D, F195D, FX195D, 140D, 147D, 169D Repl AW-4447 Washer F14D, F15D, F16D, F17D, FX17D, F18D, (5) FX18D, FF145D, FF155D Repl x68x12.5 Seal, top cover F17D, FX17D, F18D, FX18D (7) Repl RS Ball bearing F17D, FX17D, F18D, FX18D (8) Repl DP-114 Drain plug Repl (18) O R-160 Oring for DP-114 drain plug Repl (22) Fredricks Importing, Inc. 58
6 SC-1372 Spindle cover 330D, 336D, 2610D, (4) 3110D, 3810D Repl CG-4321 Spindle cover gskt 330D, 336D, 2610D, (5) 3110D, 3810D, 4300D Repl SH-1370 Spindle hsg 330D, 336D, 2610D, 3110D, 3810D Repl (6) CG-1376 Lower spindle cvr gskt 330D, 336D, 2610D, (7) 3110D, 3810D, 4300D Repl NB-3110 Needle brg 330D, 336D, 2610D, (8) 3110D, 3810D, 4300D Repl FGC-4274 Lower gear case 330D, 336D, 2610D, 3110D, (9) 3810D, 4300D Repl & GHC-4321 Cover, final gear housing 330D, 336D, 2610D, (11) 3110D, 3810D, 4300D Repl x88x12TC Seal 330D, 336D, 2610D, 3110D, (13) 3810D, 4300D Repl x88x05TC Seal 330D, 336D, 2610D, 3110D, (14) 3810D, 4300D Repl SAH-4321 Stub axle housing 330D, 336D, 2610D, (15) 3110D, 3810D, 4300D Repl SR-450 Snap ring 330D, 336D, 2610D, (25) 3110D, 3810D Repl O R-2000 Oring 330D, 336D, 2610D, 3110D, 3810D, (30) 4300D Repl O R-190 Oring 2610D Repl (30) SB-4321 Bushing 330D, 336D, 3110D, 3810D, 4300D, (33) 4500DRepl x41x5VB Seal 187D, 330D, 336D, 2610D, 3110D, 4300D (42) Repl AC-4274 Collar 330D, 336D, 3110D, 4300D Repl (67) Continued on next page Fredricks Importing, Inc. 59
7 Continued from previous page 58x75x7TC Seal 3110D (for knuckle that has been turned) (10) 64x80x13TC Seal 336D w/hd frt. axle, 2610D, 3110D, 3810D, (10) 4300D Repl AS-4465 Seal 330D, 336D, 3110D Repl (10) 60mm ID x 75mm OD x 13mm Thick 60x75x9TC Seal 330D, 336D, 2610D, 3110D, 3810D (10) Repl (old # ) 60x75x6VC Dust seal 330D, 336D, 2610D, 3110D, 3810D (10a) Repl x80x12TC Seal 2610D, 3110D Repl (10) AS-3110 Seal, front knuckle 2610D, 3110D (10) 64mm ID x 75mm OD AS-4279 Sleeve 330D, 336D, 3110D, 4300D (66) 60mm ID x 64mm OD Repl Fredricks Importing, Inc. 60
8 SA-1411 Stub axle 330D, 336D, 2610D, 3110D, (1) 3810D Repl x88x12TC Seal 330D, 336D, 2610D, (13) 3110D, 3810D Repl x88x05TC Seal 330D, 336D, 2610D, (14) 3110D, 3810D Repl NJ-207 Bearing, stub axle 330D, 336D, 2610D, 3110D, (15) 3810D Repl (old # ) SC-4321 Seal collar, wheel axle 330D, 336D, 2610D, 3110D, (16) 3810D Repl O R-450 Oring 330D, 336D, 2610D, 3110D, 3810D Repl (17) RS Bearing 330D, 336D, 2610D, 3110D, 3810D Repl (19) LN-35 Lock nut, front stub axle 330D, 336D, 2000D, 2610D, 3110D, 3810D (20) Repl (old # ) LW-35 Lock washer 330D, 336D, 2610D, 3110D, 3810D (21) Repl SG-3110 Axle gear 330D, 336D, 2610D, 3110D, (47) 3810D Repl RS Bearing for SG-3110 gear (49) Repl SA-4321 Spindle 330D, 336D, 2610D, 3110D, (50) 3810D Repl SG-4321 Upper spindle gear 330D, 336D, 2610D, (52) 3110D, 3810D Repl SG-1389 Lower spindle gear 330D, 336D, 2610D, (53) 3110D, 3810D Repl SR-34 Snap ring, Front axle spindle 330D, 336D, (54) 2610D, 3110D, 3810D Repl RS Bearing 330D, 336D, 2610D, 3110D, 3810D (55) Repl RS Bearing 330D, 336D, 2610D, 3110D, 3810D (56) Repl Fredricks Importing, Inc. 61
9 AS-1376 Seal 2620D, 2820D, 3220D, 4220D (6) Repl AS-1378 Seal, stub axle 2620D, 2820D, 3220D, (8) 4220D Repl AS-4328 Seal, front knuckle 2620D, 2820D, (12) 3220D, 4220D Repl DP-114 Drain plug Repl (15) O R-160 Oring, drain plug Repl (17) O R-220 Oring Repl (18) RS Bearing, lower spindle 2620D, 2820D, (4) 3220D, 4220D Repl RS Bearing, upper spindle 2620D, 2820D, (5) 3220D, 4220D Repl AC-4328 Seal sleeve 2620D, 2820D, 3220D, (8) 4220D Repl OR-600 Oring for AC-4328 seal sleeve (15) Repl Fredricks Importing, Inc. 62
10 Front axle components SB-4321 Steering arm and cap bushing 330D, 336D, 3110D, 3810D Repl SB-4306 APB-4191 Bushing, axle pivot 195, 240, 1600, (A) 1700, 1900, 2000 Repl (old # ) Axle pivot bushing 195D, 1300, 1500D Red & Green, (A) 1610D Repl APB-4312 Axle pivot bushing, 220, 226, 226D, 276, 1802, 1820, 2001, 2001D, 2010D, 2002, 2202, 2202D, 2210D, 2220, 2220D, 2301, 2301D, 2310, 2402, 2402D, 2420, 2420D Repl ; (A) 240D, 2210BD Repl APB-4515 APB-4321 SB-4321 Axle pivot bushing F17, F17D, FX17, FX17D, F18, F18D, FX18, FX18D Repl (A) Axle pivot bushing 330D, 336D, 2610D, 2620D, (A) 2820D, 3110D, 3220D, 3810D, 4220D, 4300D Repl (old # ) Axle pivot bushing F20, FX20, F22, FX22, F24, FX24, F255, FX255 Repl (A) SB-4440 Spindle bushing 165, 195, 186, 187, 240, 1401, 1502, 1510, 1601, 1602, 1700, 1802, 1820, 2000, 2002, F14, F15, F16 Repl (old # ) (B) SB-4306 SB x42x7TC 35x41x5VB Spindle bush. 1600, 1900 Repl (old # ) (B) Spindle bushing F20, FX20, F22, FX22, (B) F24, FX24, FX26, FX28, F255, FX255, 330, 226, 2001, 2202, 2210, 2210B, 2220, 2301, 2310, 2402, 2420, 2500, 2610, 2620, 2820, 3000, 3110, 3220, 3810, 4220, 4300 Repl & ; 2200, 2700 Repl (A & B) 2210, 2210B Re pl (A) Seal, axle pivot 226D, YMG1800D, YMG2000D, 2010D, 2210BD, 2210D, 2220D, 2420D Repl Seal, axle pivot F20, FX20, F22, FX22, F255, FX255 Repl Fredricks Importing, Inc. 63
11 Front axle components SW-4145 Seal washer 330, 336, 2500, 2610, 2620, 2820, 3000, 3110, (1) 3220, 3810, 4220, 4300 Repl x41x5VB Seal FX26, FX28, FX32, FX42 (1) Repl SR-32 Snap ring 330, 336, 2500, 2610, 2620, 2820, 3000, 3110, (2) 3220, 3810, 4220, 4300, FX26, FX28, FX32, FX42 Repl SB-1157 Spacer 330, 336, 2500, 2610, 2620, 2820, 3000, 3110, (3) 3220, 3810, 4220, 4300, FX26, FX28, FX32, FX42 Repl Nut, M20 Repl (4) Washer, 20 mm Repl. (5) APB-4145 Bushing 330, 336, 2500, 2610, 2620, 2820, 3000, 3110, (6) 3220, 3810, 4220, 4300, FX26, FX28, FX32, FX42 Repl & GF-6 Grease fitting (7) Nut, M24 Repl (8) Fredricks Importing, Inc. 64
12 Front axle components GF-6 Grease fitting Repl (1) CPS-4151 Center pin support 195, 240, 1700, 2000 (26) Repl (our part includes bushing & grease fitting) SW-4151 Spindle cover washer 240, 1500, 1510, 1601, 1610, (3) 1700, YMG1800, 1802, 2000, YMG2000, 2002, F18 Repl OR-212 Spindle cover oring 240, 1500, 1510, 1610, 1700, (4) YMG1800, 1802, 2000, YMG2000, 2002, F18 Repl FAH-4190 Front axle housing 1500 Repl (8) FAH-4151 Front axle housing 1700, 2000 (8) Repl S B-4440 Spindle bushing 1700, 2000 (9) Repl (old # ) S B-4464 Spindle bushing 2500, 3000, 3810 (9) Repl SA-4151 Spindle 180, 1500, 1700 Red, 2000 Red (12) Repl & X SA-4145 Spindle 2500, 3000, 3110, 3810 Repl (12) RS Spindle bearing 1500, 1700, 2000 (15) Repl x52x11TC Seal 1500, 1700, 2000 Repl (17) 35x48x10TC Seal 1510, 1602, 1610, 1802, YMG2000, 2002, (17) F16, F18 Repl SB-4306 Support bushing 195, 240, 1700, 2000 (2) Repl APB-4191 Front axle pivot bushing 1500 (2) Repl Fredricks Importing, Inc. 65
13 FAH-4190 Front axle housing 1500 Repl FAH-4151 Front axle housing 1700, 2000 Repl SA-4151 Spindle w/ LN-20 hub nut 180, 1500, 1700, 2000 Repl & X SA-4145 Spindle 2500, 3000, 3810 Repl SA-1211 Steering arm, LH 330, 336, 3000, 3110, 3810 Repl TR-1813 (4) Drag rod end 226, 2500, 3000, 3810 Repl X TR-1813 (6) Drag rod end 4300 Repl X TR-1812 (6) Drag rod end 2500, 3000 Repl Fredricks Importing, Inc. 66
14 FH-4151 Frt. hub 140, 147, 186, 195, 240, 1500, 1502, 1510, 1602, (2) 1610, 1700, 1702, 1720, YMG1800, 1802, 1810, 2000, YMG2000, 2002, F16, F18 Repl FH-4200 Front hub F15, 135, 155, 1300, 1301, 1401 Repl (2) HC-4151 Hub cap 135, 140, 147, 155, 165, 186, 195, 240, 1110, 1300, (3) 1401, 1500, 1502, 1510, 1602, 1700, YMG1800, 1802, 1820, 2000, 2000B, YMG2000, 2002, F14, F15, F16, F18 Repl HC-4134 Hub cap, 4 bolt 2001, 2010, 2202, 2210B, 2220, 2301, 2310, (3) 2402, 2420, 2500, 2610, 2620, 2820, F20, FX20, FX26, FX28, F255, FX255 Repl Spindle bearing 187, 1510, 1602, YMG1800, 1802, 1820, (6) YMG2000, 2002, F16, F18 Repl Repl. 1A ; F18 Repl Spindle brg. 226, 2001, 2010, 2210, 2200, 2202 (6) 2220, 2301, 2310, 2402, 2420, 2500, 2620, 2700, 2820, 3000, 3110, 3220, 3810, 4220, F20, FX20, FX26, FX28, F255, FX255 Repl (old # 1A ) RS Outer wheel brg 165, 186, 195, 240, (7) 1401, 1602, 1700, YMG1800, 1820, 2000, YMG2000, F16, F18 Repl x52x9TC Spindle seal 226, 2500, 2620, 2820, (5) 3000, 3110, FX26, FX28, F255, FX255 Repl x52x11TC Spindle seal 135, 155, 165, 195, 240, (5) 1110, 1401, 1600, 1700, 1900, 2000, F16, F18 Repl x62x19TC Spindle seal 226, 2210B (5) Repl x48x6TC Spindle seal F18, 1610 Repl (5) CPS-4151 Center pin support w/ bushing 1600, 1700, 1900, 2000 Repl Continued on next page Fredricks Importing, Inc. 67
15 6205-2RS Spindle bearing 135, 155, 1110, 1401, (6) 1600, 1900 Repl Outer wheel brg 226, 2210, 2500, 2620, 2820 (7) 3000, 3110, 3220, 4220, 4300, FX26, FX28 Repl (old # ) RS Inner wheel brg 165, 186, 195, 240, 1110, (8) 1401, 1602, 1700, YMG1800, 1820, 2000, YMG2000, F16, F18 Repl Inner wheel brg 226, 2210, 2210B, 2500, 2620, (8) 2820, 3000, 3110, 3220, 4220, 4300, FX26, FX28 Repl LN-211 Spindle nut 1600, 1700 Green, 1900, (10) 2000 Green Repl LW-20 Spindle LW 1600, 1700 Green, 1900, (4) 2000 Green Repl (old # ) LN-20 Spindle nut 195, 240, 1110, 1300, 1401, 1500, (10) 1700 Red, 2000 Red Repl (old # ) SW-4151 Spindle cover washer 240, 1500, 1510, 1601, 1610, (12) 1700, YMG1800, 1802, 2000, YMG2000, 2002, F18 Repl O R-212 Spindle cover oring 240, 1500, 1510, 1610, 1700, (13) YMG1800, 1802, 2000, YMG2000, 2002, F18 Repl x52x11TC Front spindle seal 1500, 1700, 2000 Repl (15) 40x62x19TC Front spindle seal 2200, 2500, 3000 (15) Repl AS-4314 Front spindle seal F20, FX26, FX28, 2001, (15) 2220, 2301, 2420, 2620, 2820 Repl Fredricks Importing, Inc. 68
16 RGP-4311 Front ring gear & pinion 220D, 240D, 250D, 276D, (1) YMG1800D, 1802D, 2000D, YMG2000D, 2010D, 2020D, 2202D, 2210D, 2220D, 2301D, 2310D, 2402D Repl RGB-4190 Ring gear bushing 1702D, 1720D, YMG1800D, (2) YMG2000D, 2202D, 2310D, 2402D Repl SC-3662 Spacer collar 1500D, 1610D, 1702D, 1720D, (4) YMG1800D, YMG2000D, 2010D, 2202D, 2210BD, 2210D, 2310D, 2402D Repl x55x8TC Seal, front pinion 226D, 1500D, 1610D, 1700D, 1702D, 1720D, (5) YMG1800D, 2000D, YMG2000D, 2001D, 2202D, 2210BD, 2210D, 2301D, 2310D, 2402D Repl (old # ) 45x62x9TC Seal, front pinion 2610D, 3110D, F37D, F46D (5) Repl (old # ) Pinion bearing 226D, 1702D, 1720D, YMG1800D, (6) YMG2000D, 2210BD, 2202D, 2310D, 2402D Repl (old # ) LN-28 Pinion nut 226D, 1500D RED, 1610D, 1702D, (7) 1720D, YMG1800D, 2001D, 2202D, 2210BD, 2210D, 2301D, 2310D, 2402D Repl CONTINUED ON NEXT PAGE Fredricks Importing, Inc. 69
17 SC-4191 Pinion seal collar 226D, 1500D, 1702D, 1720D, (8) YMG1800D, 2010D, 2202D, 2402D Repl OR-630 Pinion hsg o ring 1702D, 1720D YM G1800D, (9) YMG2000D, 2202D, 2210D, 2402D Repl (old # ) RS Ring gear bearing 1702D, 1720D, YMG1800D (10) YMG2000D, 2202D, 2402D Repl OR-210 O ring 1500D red, 1610D, 1702D, 1720D, (11) YM G1800D Repl OR-250 Pinion shaft o ring 1500D red, 1610D, (12) 1702D, 1720D, YMG1800D, 2202D, 2310D, 2402D Repl PG-4420 Pinion gear (10 teeth) 1610D, 1702D, 1720D, (15) F22D, FX22D, F24D, FX24D Repl PG-3151 Pinion gear (16 teeth) 1610D, 1702D, 1720D (16) Repl SW-4740 Spacer washer, spider gear 1700D, YMG1800D, (17) 2202D, 2310D, 2402D Repl PH-4311 Pinion housing 226D, 240D, 250D, YMG1800D, 1802D, 1810D, (20) 1820D, 2000D, YMG2000D, 2001D, 2002D, 2010D, 2020D, 2202D, 2210D, 2220D, 2301D, 2310D, 2402D, 2420D Repl PH-4158 Pinion housing 195D, 1601D, 1610D, 1700D, 1702D, 1720D (20) Repl Fredricks Importing, Inc. 70
18 SG-1352 Gear, front axle 195D, 220D, 226D, 240D, 250D, 276D, (9) 1601D, 1610D, 1700D, 1702D, 1720D, YMG1800D, 1802D, 1810D, 1820D, 2000D, YMG2000D, 2001D, 2002D, 2010D, 2020D, 2202D, 2210BD, 2210D, 2220D, 2301D, 2310D, 2402D, 2420D Repl SR-680 Snap ring 1802D, 1820D, 2002D Repl (2) SR-720 Snap ring 226D, 240D, 276D, 1601D, 1610D, 1702D, 1720D, (2) YMG1800D, 1810D, YMG2000D, 2001D, 2010D, 2020D, 2202D, 2210D, 2220D, 2402D, 2301D, 2310D, 2420D Repl SR-24 Snap ring, front axle 195D, 240D, 1601D, 1610D, 1702D, 1720D, YMG1800D, 1802D, 2000D, YMG2000D, 2002D, 2010D, 2020D, 2202D, 2402D Repl (2 required) SR-25 Snap ring, front axle 1500D, 2210D, 2301D, 2310D (5) Repl (2 required) SG-1314 Gear, front axle 1500D RED Repl (9) SG-1356 Gear, front axle 1500D Green Repl (9) RS Bearing 1500D Repl (6) SG-3110 Gear, front axle 330D, 336D, 2610D, 3110D, (9) 3810D Repl RS Bearing 330D, 336D, 2610D, 3110D, (6) 3810D Repl SG-1423 Gear, front axle side 135D, 155D, 1100D, 1300D, (9) 1301D 60d x 30.5L Repl SG-1943 Gear, front axle side 135D, 155D, 165D, 1401D (9) 64d x 33L Repl RS Bearing 226D, 276D, 1601D, 1610D, 1702D, 1720D, (6) YMG1800D, 1802D, 1820D, 2000D, YMG2000D, 2001D, 2002D, 2010D, 2020D, 2202D, 2220D, 2301D, 2402D, 2420D Repl FAC-1300 Front axle seal case 155D, 165D, 1100D, 1300D, 1301D, 1401D Repl Fredricks Importing, Inc. 71
19 DS-4313 Front axle dipstick F24D, FX24D, FX235D, 226D, YMG1800D, YMG2000D, 2001D, 2202D, 2220D,, 2301D, 2310D, 2402D, 2420D, 2620D, 2820D, 3110D Repl (old # ) OR-220 O ring for DS-4313 dipstick Repl SR-720 Snap ring F22D, FX22D, F24D, FX24D Repl (1) RS Top spindle brg F22D, FX22D, F24D, FX24D, (4) F255D, FX255D Repl RS Lower spindle brg F22D, FX22D, F24D, FX24D, (15) F255D, FX255D Repl RS Lower spindle brg F20D, FX20D, F22D, FX22D, (5) F24D, FX24D, F255D, FX255D Repl SR-900 Snap ring F20D, FX20D, F22D, FX22D, F24D, FX24D, (13) F215D, FX215D, F255D, FX255D Repl AS-4556 Spindle hsg seal F20D, FX20D, F22D, FX22D, (8) F24D, FX24D, F215D, FX215D, F255D, FX255D Repl x82x12TC Axle seal F20D, F22D, FX22D, (10) F215D, FX215D Repl RS Axle bearing F20D, FX20D, (14) F22D, FX22D, F24D, FX24D, F255D, FX255D Repl AC-4312 Axle collar F22D, FX22D, F24D, FX24D, F215D, (12) FX215D, F255D, FX255D Repl x80x12TC Axle seal F20D, FX20D, F22D, FX22D, F24D, (10) FX24D, F215D, FX215D, F255D, FX255D Repl AC-4447 Axle collar 226, F18D, F20D, FX20D (12) Repl Fredricks Importing, Inc. 72
20 DC-4730 TR-1812 Dust cover, ball joint, common to most models Repl Tie rod end LH thread for right side 195D, 226, 226D, 240D, (B) 276, 276D, 330D, 336, 336D, 1610D, 1700D,YMG1800D, 1802D, 1810D, 1820D, 2000D, YMG2000D, 2001D, 2002D, 2010D, 2200, 2202D, 2210BD, 2210D, 2220D, 2301D, 2310D, 2402D, 2420D, 2500, 2610, 2610D, 2700, 3000, 3110, 3110D, 3810, 3810D, 4300D, F17D, FX17D, F18D, FX18D, F20, F20D, FX20, FX20D, F24, F24D, FX24, FX24D Repl (Old # X) TR-1813 Tie rod end RH thread for left side 135, 135D, 155, 155D, (A) 165, 195D, 226, 226D, 240D, 276, 276D, 330D, 336, 336D, 1300, 1300D, 1401, 1602, 1610D, 1700D, YMG1800D, 1802D, 1810D, 1820D, 2000D, YMG2000D, 2001D, 2002D, 2010D, 2200, 2202D, 2210BD, 2210D, 2220D, 2301D, 2310D, 2402D, 2420D, 2500, 2610, 2610D, 2700, 3000, 3110, 3110D, 3810, 3810D, 4300D, F17D, FX17D, F18D, FX18D, F24, F24D, FX24, FX24D Repl (Old # X) TR-4150 Tie rod end, RH (long) 186, 186D, 187D, 195, 240, 1500, (C) 1600, 1610, 1700, 1900, 2000, F17, FX17, F18, FX18 Repl (Old # ) TR-8290 Tie rod end, LH (short) 1700, 1820, 2000, 2010 (A) Repl ; 186, 186D, 187D, 195, 240, 1500, 1500D, 1510, 1510D, 1600, 1610, 1802, 1810, 1820, 1900, 2001, 2002, 2202, 2210, 2220, 2301, 2310, 2402, 2420, F17, FX17, F18, FX18 Repl TR-1500 Complete tie rod assembly 1500D Red or Green TR-2000 Complete tie rod assembly 1700, 1802, 2000, 2002 Fredricks Importing, Inc. 73
21 AS-1376 Front knuckle seal 2620D, 2820D, 3220D, 4220D (6) Repl AS-4328 Seal, front knuckle 2620D, 2820D, 3220D, 4220D (2) Repl & x68x12.5 Seal, front spindle F18D, FX18D Repl (2) RS Bearing, ball, sealed, spindle 2620D, 2820D, (1) 3220D, 4220D Repl RS Bearing, ball, sealed, spindle F18D (1) Repl OR-220 O ring Repl (8) CH-4158 Center axle housing 195D, 1601D, 1610D, 1700D, (1) 1702D, 1720D Repl APB-4191 Axle pivot bushing 195D, 1601D, 1610D, 1700D, (2) 1702D, 1720D Repl CB-4150 Axle pivot bushing 135D, 155D, 165D, (2) 1100D, 1300D, 1301D, 1401D Repl x32x7SC Axle pivot seal 195D, 1500D, 1601D, 1610D, (3) 1700D, 1702D, 1720D Repl RP-820 Roll pin Repl (7) RP-520 Roll pin Repl (7a) SC-3662 Spacer 195D, 1610D, 1702D, 1720D, 2010D, (8) 2210D, 2310D Repl x55x8TC Seal 195D, 1601D, 1610D, 1700D, 1702D, 1720D (9) Repl DP-114 Drain plug Repl (10) OR-160 Oring for DP-114 Repl (11) OR-630 O ring for pinion housing 195D, 1601D, 1610D, 1700D, (12) 1702D, 1720D, YMG1800D Repl Fredricks Importing, Inc. 74
22 S A-4191 S A-1430 LN-1500 LW-1500 S G-1457 Wheel stub axle 1500D RED Repl (G) Wheel stub axle 1500D GREEN Repl (G) Lock nut, stub axle 1500D Red or Green (A) Repl Lock washer, stub axle 1500D Red Repl ; (B) 1500D Green Repl (old # ) Gear, stub axle side gear 1500D RED Repl (C) S G-1421 Gear, stub axle 1500D GREEN Repl (C) Bearing, stub axle 1500D Red or Green (D) Repl x62x9TC 45x62x9TC Seal, stub axle 1500D GREEN (E) Repl (old # ) Seal, stub axle 1500D RED Repl (E) SC-1466 Seal collar, stub axle 1500D Red Repl (F) OR-300 Oring Repl (G) SR-62 SR-4191 Snap ring 1500D Red or Green Repl (H) Spacer ring 1500D Red or Green Repl (J) S A-1500 Steering arm 1500D Red or Green Repl S-701 Spindle, LH 1500D Green Repl S-801 Spindle, RH 1500D Green Repl S-137 Spindle, LH 1500D Red Repl S-138 Spindle, RH 1500D Red Repl S-137 S-701 S-138 S-801 Fredricks Importing, Inc. 75
23 6009-2RS Ball bearing, sealed 1500D (1) Repl SG-1314 Gear, side 1500D Red Repl (2) SG-1356 Gear, side 1500D Green Repl (2) SR-25 Snap ring for SG-1314 & SG-1356 (3) Repl RS Ball bearing Repl (4) FW-1393 Flat washer LH 1500D Red (5) Repl , 1500D Green Repl x30x7TC Seal, top knuckle 1500D Red (6) Repl & x35x7TC Seal, top knuckle 1500D Green (6) Repl (old # ) RS Ball bearing, sealed Repl (7) TW-1437 Thrust washer, bottom knuckle 1500D Red (8) Repl PTO W-2854 Washer 1500D Green Repl (8) SG-1417 Gear, top knuckle 1500D Red Repl (9) SG-1418 Gear, lower knuckle 1500D RED (10) Repl SG-1425 Gear, lower knuckle 1500D GREEN (9/10) (one-pie ce gear) Repl SR-50 Snap ring used with SG-1418 Repl (11) NB-4191 Needle bearing used with SG-1418 (12) Repl NB-1412 Needle brg, spindle 1500D Green (12) Repl SR-33 Snap ring used with SG-1418 (13) Repl (old # ) RS Ball bearing 1500D Red or Green (14) Repl SB-1455 Spacer 1500 Repl (15) Fredricks Importing, Inc. 76
24 115x140x15TC Seal, front knuckle 1500D RED (2) Repl x135x14TC Seal, front knuckle 1500D GREEN Repl (2) S A-1500 Steering arm 1500D Red or Green Repl (3) S-701 Spindle, LH 1500D Green (1) Repl S-801 Spindle, RH 1500D Green (4) Repl S-137 Spindle, LH 1500D Red (1) Repl S-138 Spindle, RH 1500D Red Repl (4) FW-1385 Washer, spindle thrust, RH 1500D (46) Repl Fredricks Importing, Inc. 77
25 6205-2RS Ball bearing, sealed, upper spindle, front axle (A) 1610D, 2220D, 2310D, 2420D Repl RS Ball bearing, sealed, lower spindle, front axle (B) 1610D, 2001D, 2301D, 2310D Repl NB-4311 Needle bearing 220D, 250D, 1610D, 1820D, (C) 2000D, 2020D, 2202D, 2210D, 2310D, 2402D Repl RS Ball bearing, sealed, outer stub axle (D) 1610D Repl RS Ball bearing, sealed, outer stub axle 2010D, (D) 2210D, 2310D Repl RS Ball bearing, sealed, inner stub axle (E) 1610D Repl RS AS-6831 SC x68x12.5 Ball bearing, sealed, inner stub axle 2001D, (E) 2010D, 2210D, 2301D, 2310D Repl Stub axle seal, 195D, 1601D, 1610D (F) 1700D, 1702D, 1720D Repl Stub axle seal collar w/o ring 336D, (F) 2610D, 3110D, 3810D Repl Stub axle seal 2010D, 2202D, 2402D (F) Repl x68x14.3TCFY Stub axle seal 240D, 2000D, 2210D Repl (F) SC x88x05TC Stub axle seal collar 195D, 220D, 240D, 250D, (F) 2000D, 2010D, 2210D, 2310D Repl Seal, front knuckle side 2610D, 3110D 3810D, 4300D Repl (F) 65x88x12TC Seal, front knuckle side 2610D, 3110D, (F) 3810D, 4300D Repl RS Ball bearing, sealed 3110D, 3810D, (D) 4300D Repl SB-4311 Spacer 2210D, 2310D Repl (G) SR-100 Snap ring 2202D, 2210D, 2310D, 2402D (H) Repl Fredricks Importing, Inc. 78
26 SR-680 Snap ring 276D, 2210D, 2310D Repl (I) SG-1394 SG-4311 SW-1386 Upper spindle gear 195D, 240D, 250D, 276D, (J) 1610D, 1810D, 2001D, 2010D, 2020D, 2202D, 2210D, 2301D, 2310D, 2402D Repl Lower spindle gear 220D, 240D, 250D, 276D, (K) 1810D, 1820D, 2001D, 2010D, 2020D, 2202D, 2210D, 2301D, 2310D, 2402D Repl Washer, upper 1610D, 1700D, 1820D, 2000D, 2010D, (L) 2020D, 2202D, 2210D, 2310D, 2402D Repl SR-4311 Snap ring, front axle 1610D, 1702D, 1720D, (M) 1820D, 2010D, 2020D, 2202D, 2210D, 2310D, 2402D Repl SR-28 LW-30 LW-4311 LN-30 LN-35 SA-4158 Snap ring 1610D, 1702D, 1720D, 1820D, (N) 2010D, 2020D, 2202D, 2210D, 2310D, 2402D Repl Lock washer 1610D, 1702D, 1720D (O) Repl Lock washer 1802D, 1810D, 1820D, 2002D, 2010D, (O) 2020D, 2202D, 2210D, 2402D Repl Lock nut 1610D, 1702D, 1720D, (P) Lock nut 1802D, 1810D, 1820D, 2002D, 2010D, (P) 2020D, 2202D, 2210D, 2310D, 2402D, 3810D Repl (old # ) Wheel stub axle 1610D, 1700D, 1702D, 1720D (Q) Repl SA-4210 Wheel stub axle 135D, 155D, 1100D, 1300D Repl (Q ) SA-1410 SA-1411 Wheel stub axle 1802D, 1810D, 1820D, 2000D, 2001D, 2002D, (Q) 2010D, 2020D, 2202D, 2210BD, 2210D, 2301D, 2310D, 2402D Repl Wheel stub axle 336D, 2610D, 3110D, 3810D Repl (Q) Fredricks Importing, Inc. 79
27 APB-4191 Front axle center pivot bushing 186D, (2) 187D Repl x32x7SC Front axle center pivot seal 186D, 187D, (3) 1500D, 1502D, 1602D Repl DP-114 Drain plug 186D, 187D, 1510D (5) Repl O R-160 Oring for DP-114 drain plug (6) Repl O R-500 Oring, between axle hsg & elbow 186D, (10) 187D, 1502D, 1602D Repl SB-4321 Bushing, king pin 186D, 187D (16) Repl ; 1502D, 1602D Repl x41x5VB Seal, king pin 186D, 187D, 1502D, (17) 1602D Repl AC-1364 Seal collar 186D, 187D, 1502D, 1602D (19) Repl x57x11.5TC Seal 186D, 187D, 1502D, 1602D, (21) F18D, FX18D Repl Fredricks Importing, Inc. 80
28 Front axle parts 140D, 147D, 187D, 1502D, F15D, F16D, F17D, F18D AS-4447 Stub axle seal Repl (A) AC-4447 Stub axle collar Repl (B) RS Stub axle bearing Repl (C) Front axle parts for 1510D NB-4441 Flat needle bearing, lower spindle (1) Repl NB-1510 Spindle needle bearing 2 per axle (2) Repl NB-4440 Spindle needle bearing 1 per axle (3) Repl RS Top spindle bearing Repl (4) 40x62x12TC Stub axle seal Repl. 1A (5) Outer stub axle bearing & cup (6) Repl Inner stub axle bearing & cup (7) Repl x35x7TC Seal, top spindle Repl (8) 115x140x15TC Seal, front axle knuckle Repl (9) OR-850 Oring between top cap and lower top case Repl Fredricks Importing, Inc. 81
29 S-1300 Spindle 1300D, 1301D Repl SB-1427 Spindle bushing 135D, 155D, 1100D, (1) 1300D, 1301D Repl RS Inner axle bearing 1300D, 1301D (2) Repl Top spindle brg 1100D, 1300D, (4) 1301D, 1401D Repl & RS Outer axle bearing 1300D, 1301D (5) Repl NB-4210 Spindle needle brg 1100D, 1300D, (6) 1301D, 1401D Repl O R-220 Oring Repl (7) SG-1423 Gear 155D, 1100D, 1300D, 1301D (8) Repl SG-1943 Gear 1401D Repl (8) SG-4251 Double gear 135D, 1100D, 1300D, 1301D Repl (9) SG-4341 Double gear 155D, 165D, 1401D Repl (9) SG-1442 Stub axle gear 135D, 155D, 1100D, 1300D, 1301D (2) Repl SG-1401 Stub axle gear 1401D Repl (2) RS Inner bearing 1300D, 1301D Repl (3) RS Outer bearing 1300D, 1301D, 1401D Repl (4) SR-30 Snap ring, stub axle 1300D, 1301D, 1401D (5) Repl x62x12TC Seal 1100D, 1110D, 1300D, 1301D, 1401D (6) Repl. 1A & AC-4210 Axle seal collar 1100D, 1300D, 1301D, (7) 1401D Repl SA-4210 Stub axle 135D, 155D, 1100D, (8) 1300D, 1301D Repl Fredricks Importing, Inc. 82
30 SA-4321 (8) Spindle w/key 330D, 336D, 2610D, 3110D, 3810D Repl SA-1385 (8) Spindle 195D, 240D, 226D, 250D, 276D, 1601D, 1610D, 1702D, 1720D, 1802D, 1810D, 1820D, 2000BD, 2001D, 2002D, 2010D, 2020D, 2202D, 2210BD, 2210D, 2301D, 2310D, 2402D Repl WK-722 Woodruff key for SA-1385 Repl NB-4311 (3) Needle bearing, front axle spindle 226D, 276D, 1610D, 2000D, 2000BD, 2202D, 2210D, 2310D, 2402D Repl RS (9) Wheel bearing early 226D Repl RS (9) Wheel bearing 226D sn up Repl SR-242 (7) Snap ring 226D, 2002D, 2202D, 2310D, 2402D Repl LN-35 (1) Lock nut, front stub axle 226D, 2202D, 2001D, 2210BD, 2301D, 2310D, 2402D, 2610D, 3110D 3810D Repl (old # ) LW-4311 (2) Lock washer, stub axle 226D, 2001D, 2002D, 2202D, 2210D, 2301D, 2310D, 2402D Repl O R-400 (6) O ring, stub axle 2002D, 2202D, 2310D, 2402D Repl SC-4311 (4) Seal collar, frt. axle 195D, 220D, 240D, 250D, 276D, 2000D, 2002D, 2202D, 2210D, 2310D, 2402D Repl x68x12.5 (5) Seal, front knuckle 226D, 276D, 1802D, 2001D, 2002D, 2202D, 2220D, 2301D, 2402D, 2420D Repl x68x14.3TCFY (5) Seal, front knuckle 240D, 2210D Repl AS-6831 (5) Seal, front axle side, 195D, 1601D, 1610D, 1700D, 1702D, 1720D Repl RS (10) Bearing 226D Repl SC-4161 (11) Spacer 1802D, 1820D, 2002D, 2020D, 2202D, 2220D, 2310D, 2402D, 2420D Repl Fredricks Importing, Inc. 83
31 Drive shaft parts Front SS-4191 Splined shaft seal 195D, 220D, 240D, 250D, 1500D, 1601D, 1610D, (5) YMG1800D, 2000BD, YMG2000D, 2020D, 2202D, 2210D, 2310D, 2402D, F20D, FX20D, F24D, FX24D, F255D, FX255D Repl DC-4191 Coupling 195D, 220D, 240D, 250D, 276D, 1500D, 1601D, 1610D, 1702D, (4) 1720D, YMG1800D, 2000BD, YMG2000D, 2020D, 2202D, 2220D, 2310D, 2402D, 2420D, F20D, FX20D, F24D, FX24D, F255D, FX255D Repl DC-4321 Coupling 2610D, 2620D, 2820D, 3110D, 3810D, 4300D Repl (4) CB-4191 Coupling boot (rubber) 195D 220D, 240D, 250D, 1500D, 1601D, 1610D, (1) 1702D, 1720D, YMG1800D, 2000BD, YMG2000D, 2001D, 2020D, 2202D, 2210BD, 2210D, 2220D, 2310D, 2402D, 2420D, F20D, FX20D, F24D, FX24D, F255D, FX255D Repl (old # ) CB-4321 Coupling boot (rubber) 2610D, 2620D, 2820D, 3110D, 3810D, 4300D (1) Repl DW-4191 Washer, spring retainer 195D, 220D, 240D, 250D, 1500D, 1601D, 1610D, (6) 1702D, 1720D, YMG1800D, 2000BD, YMG2000D, 2020D, 2220D, 2310D, 2420D, F20D, FX20D, F24D, FX24D, F255D, FX255D Repl ( for YM 1500) DW-4321 Washer, spring retainer 2610D, 2620D, 2820D, 3110D, 3810D, 4300D (6) Repl DS-4311 Spring 195D, 220D, 240D, 250D, 1500D, 1601D, 1610D, 1702D, (7) 1720D, YMG1800D, 2000BD, YMG2000D, 2020D, 2202D, 2210D, 2220D, 2310D, 2402D, 2420D, F20D, FX20D, F24D, FX24D, F255D, FX255D Repl DS-4191 Sleeve 195D, 220D, 240D, 250D, 276D, 1500D, 1601D, 1610D, 1702D, (2) 1720D, YMG1800D, 2000BD, YMG2000D, 2020D, 2202D, 2210D, 2220D, 2310D, 2402D, 2420D Repl SB-4190 Steel ball 195D, 220D, 240D, 250D, 276D, 1500D, 1601D, 1702D, 1720D, (3) YMG1800D, YMG2000D, 2020D, 2202D, 2210D, 2220D, 2310D, 2402D, 2420D, F24D, FX24D, F255D, FX255D Repl (old # ) SB-1132 Steel ball, front drive shaft 2620D, 2820D, 3110D (3) FX26D, FX28D Repl (old# ) DSB-4321 Drive shaft coupling boot 330D, 2620D, 2820D, 4300D (8) Repl Fredricks Importing, Inc. 84
32 Drop box parts DBA-4311 Drop box arm 2001D, 2020D, 2202D, 2210D, 2210BD, (10) 2220D, 2301D, 2310D, 2402D, 2420D Repl DBA-4421 Drop box shift arm 220D, 226D, 250D, 1601D, 1610D, (10) 1702D, 1720D, 1802D, 1810D, 1820D 2002D Repl OR-110 O ring for DBA-4421 arm Repl (27) SB-4191 Shift block, drop box 220D, 226D, 250D, 1610D, 1810D, 2002D, (13) 2202D, 2210D, 2220D, 2402D, 2420D, 2610D, 2620D, 2820D, 3110D, 3220D, 4220D, F24D, FX26D, FX28D, FX32D, FX42D Repl x40x7SC Drop box seal 1500D RED, 1700D, 2000D Repl (15) 30x52x8TC Drop box seal 186D, 220D, 226D, 250D, 276D, 1601D, 1610D, (15) 1702D, 1720D, 1802D, 1810D, YMG1800D, YMG2000D, 2001D, 2002D, 2010D, 2202D, 2220D, 2301D, 2310D, 2402D, 2420D Repl (Old # 1A ) 30x47x8TC Drop box seal 195D, 240D, 1700D, 2000D, 2210D, 2210BD (15) Repl (Old # ) 35x55x8TC Drop box seal 2620D, 2820D, 3220D, 4220D (15) Repl (old # ) 35x55x11TC Drop box seal 330D, 4300D Repl (15) 40x55x8TC Drop box seal 2610D, 3110D, 3810D, 4500D Repl (15) 25x42x8TC Seal, Trans to front drive shaft 186D, 1510D, FX18 (15) Repl (Old # ) Continued on next page Fredricks Importing, Inc. 85
33 Continued from previous page Drop box parts RS Ball bearing 195D, 240D Repl (25) RS Ball bearing 330D, 2620D, 2820D, 3110D, 4500D (25) 3220D, 3810D, 4220D, 4300D Repl RS Ball bearing 226D, 1802D, YMG1800D, YMG2000D, 2001, (25) 2002D, 2301D, 2310D, 2620D, 2820D, 3220D, 4220D Repl RS Ball bearing 220D, 226D, YMG1800D, 1802D, YMG2000D, (24) 2001D, 2002D, 2301D, 2310D Repl RS Ball bearing 195D, 240D Repl (24) RS Ball bearing 330D, 3110D, 4300D, 4500D Repl (24) SB-8000 Steel ball 187D, YMG1800, YMG2000, (26) F24D, FX26D, FX28D Repl SS-6190 Drop box seal sleeve 220D, 250D, 1601D, 1610D, 1702D, 1720D, (16) YMG1800D, 1802D, 1810D, 1820D, YMG2000D, 2001D, 2002D, 2010D, 2020D, 2202D, 2210D, 2220D, 2301D, 2310D, 2402D, 2420D Repl.1E & SS-4274 Drop box seal sleeve 330D, 2620D, 2820D Repl (16) DBG-2816 Drop box gear (42 teeth) YMG1800D, 1802D, 1820D (5) Repl ; can repl (39 teeth) on 1810, YMG2000 and 2002 when purchased as a set with DBG-2822 DBG-2822 Drop box gear (26 teeth) YMG1800D, 1802D, 1820D (8) Repl ; can repl (32 teeth) on 1810, YMG2000 and 2002 when purchased as a set with DBG-2816 Fredricks Importing, Inc. 86
34 Tires & Rims 7-16 R1 Tire for 336D, 2610D, 3110D, F24D, FX24D 6-14 R1 Tire for F20D, 240D, 2020D 5-12 R1 Tire for 140D, 147D, 155D, 1401D, 1510D 5-14 R1 Tire for 195D, 1500D, 1610D, 1702D Repl FW-4210 Rim, 4 x 12 (4 bolt) 155D, 1300D, 1301D, 1401D Repl FW-1500 Rim, 4 x 14 (4 bolt) 1500D Repl FW-4279 Rim, 5 x 16 (6 bolt) 330D, 336D, 2610D, 3110D, 3810D Repl FW-4279 Rim, 5 x 16 (6 bolt) 276D, 336D, 2620D, 2820D, 3220D, 4300D, F24D, FX24D, FX26D, FX28D, F255D, FX255D Repl FW-4100 Rim, 3 x 12 front (4 bolt) 140, 147, 195, 1500, 1502, 1510, 1600, 1601, 1602, 1610, 1700, 1702, 1720, YMG1800, 1802, 1900, YMG2000, 2002, F16, F17, FX17, F18, FX18, F20, FX20 Repl FW-4134 Rim, 3 x 15 front (4 bolt) 2010, 2210, 2310, 2610, F22, FX26 Repl FW-4145 Rim, 4 x 16 front (6 bolt) 330, 336, 3000, 3110, 3220, 3810, 4220, 4300, FX28, FX32, FX42, FX285, FX305, FX335, FX435 Repl FW-4158 Rim, 4 x 14 front (4 bolt) 195D, 1601D, 1610D, 1700D, 1702D, 1720D, F16D Repl Q FW-8351 Rim, 5 x 14 front (6 bolt) 220D, 226D, 240D, 250D, 276D, 1810D, 2000D, 2002D, 2010D, 2020D, 2202D, 2210D, 2220D, 2310D, 2402D, 2420D Repl (old # Q) FW-4447 FW-4362 FW-4275 Rim, 5 x 12 (4 bolt) 180D, 186D, 187D Repl Q Rim, 5 x 14 (6 bolt) 226D, 2000D, 2202D, 2220D, 2402D, 2420D, F20D, FX20D, F215D, FX215D Repl (old # ) Rim, 3 x 15 (6 bolt) 220, 226, 250, 276 (2 wd) Repl Q Fredricks Importing, Inc. 87
35 SH-1371 (11) Front axle top cap1601d, 1610D, 1700D, 1702D, 1720D, 2000D, 2210D Re pl ; 1802D, 1820D, 2001D, 2002D, 2010D, 2202D, 2220D, 2301D, 2310D, 2402D, 2420D Re pl x40x7TC (1) Top seal 226D, 276D, 1700D, 1610D, 1702D, 1720D, 1802D, 1820D, 2000D, 2002D, 2202D, 2210BD, 2402D Repl x145x13.5TC (2) Front knuckle seal 220D, 226D, 250D, 276D, 1601D, 1610D, 1700D, 1702D, 1720D, 1802D, 1820D, 2000D, 2002D, 2202D, 2210BD, 2210D, 2220D, 2402D, 2420D Repl x68x12.5 (3) Wheel seal 226D, 276D, 1802D, 1820D, 2002D, 2202D, 2402D Repl AS-6831 (3) Wheel seal 1601D, 1610D, 1702D, 1720D Repl x68x14.3TCFY (3) Wheel seal 240D, 2000D, 2210D, 2210BD Repl O R-160 (4) O ring for drain plug 226D, 1601D, 1610D, 1702D, 1720D, 2202D, 2402D Repl SR-720 (10) Snap ring 240D, 1610D, 2010D, 2202D, 2310D, 2402D Repl DP-114 (6) Drain plug 226D, 1601D, 1610D, 1702D, 1720D, 1802D, 2002D, 2202D, 2402D Repl SR-100 (7) Snap ring 1601D, 1610D, 1802D, 2001D, 2002D, 2202D, 2210D, 2301D, 2310D, 2402D Repl O R-70 (8) O ring, front axle hsg to elbow 1802D, 1820D, 2001D, 2002D, 2202D, 2301D, 2310D, 2402D Repl O R-1371 (8) Oring, front axle hsg to elbow 1601D, 1610D, 1700D, 1702D, 2000D, 2210D Repl SR-680 (9) Snap ring 276D, 1802D, 2002D, 2202D, 2210D, 2210BD, 2402D Repl SG-1352 Gear, front axle 1601D, 1610D, 1802D, 1810D, 2002D, 2202D, 2210D, 2310D, 2402D Repl Fredricks Importing, Inc. 88
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
Replacement Spare Parts for FORD TRACTOR
(3650) POWER STEERING HYDRAULIC PUMP GEAR SET (9T.) (866) HYDRAULIC PUMP FRONT DRIVE GEAR (10T.) (C5NN 3A710 A/NUT) STRG. GEAR SHAFT MAIN NUT (C5NN 3A710 A/TUBE) STRG. GEAR SHAFT MAIN NUT TUBE (C5NN 3A710
CLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
PARTS SECTION. Section MF4
PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator
INTERNATIONAL RA351 FRONT - REAR AXLE
PARTS LISTED IN THIS CATALOG ARE NOT NECESSARILY MANUFACTURED BY THE ORIGINAL EQUIPMENT MANUFACTURER AND ANY REFERENCE TO THE TRADEMARKS OR PART NUMBERS OF OTHERS ARE FOR CROSS REFERENCE INFORMATIONAL
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
REEL LAWN MOWERS MASPORT 400-500-660
Issue A June 2009 REF # 719046 REEL LAWN MOWERS MASPORT 400-500-660 Part number Model Engine MASPORT 019036 400 RRR B & S Series 475 MASPORT 019044 400 RRR Honda GX160 MASPORT 019046 500 RRR B & S Series
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List Spicer Single Reduction 34,000-45,000 lbs AXIP-0089 November 2004 Table of Contents TABLE OF CONTENTS Spicer Axle Parts Book.......... 2 Forward Tandem Axle Differential
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE R001561 Lockwasher 12402, 42203, 5402, 65463, E1561, L1893, L893, M1051 PIN SIZE THICK O.D. I.D. DIA. LGTH 7/32" 5-1/16"
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-5005C March 2003
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-00C March 00 For the most current information, visit the Roadranger web site at www.roadranger.com Contents How To Use The Illustrated Parts
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
MUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
STEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
AXLE SHAFTS - FRONT. 1993 Toyota Celica DESCRIPTION REMOVAL, DISASSEMBLY, REASSEMBLY & INSTALLATION. 1993 DRIVE AXLES Toyota FWD Axle Shafts
AXLE SHAFTS - FRONT 1993 Toyota Celica 1993 DRIVE AXLES Toyota FWD Axle Shafts Toyota; Celica DESCRIPTION Axle shafts transfer power from transaxle to driving wheels. All axle shafts consist of a shaft
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
DANA 30 MANUAL HUB CONVERSION KIT
DANA 30 MANUAL HUB CONVERSION KIT 12194 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN Your safety and the safety of other motorists is very important. Your Jeep is an off road capable vehicle
FRAME ASSEMBLY Item Description Part No Item Descriptiom Part No
FRAME ASSEMBLY Item Description Part No Item Descriptiom Part No 1 BOLT HT ZP M8X20 SET SCREW FBOPL02 26 FRAME M500 PTD RED L1505-710R 2 WASHER SPRING ZP M8 FWAPL58 26 FRAME M500 W/A PTD MASPORT L1505-710M
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
12. REAR WHEEL/BRAKE/SUSPENSION
12 12 12-0 SERVICE INFORMATION... 12-1 REAR BRAKE... 12-5 TROUBLESHOOTING... 12-2 REAR SHOCK ABSORBER... 12-8 REAR WHEEL... 12-3 REAR FORK... 12-9 SERVICE INFORMATION GENERAL INSTRUCTIONS When installing
INTRODUCTION KINGPIN REPLACEMENT
KINGPIN REPLACEMENT Author: Randy Baumann All information, illustrations and specifications are based on the best information available at the time of publication. The author cannot guarantee the accuracy
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
ROTARY CUTTER PARTS. Bolt, Rotary Cutter Blade
A-8227 Bolt, Rotary Cutter Blade Uses 8227JN Jam Nut & 8227LW Lock Washer Alamo SEVERAL BMB SEVERAL A-02964330 Bolt, Rotary Cutter Blade Alamo SEVERAL A-00761402 Bolt, Rotary Cutter Blade Alamo SEVERAL
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
Atlas Front Input Change
Atlas Front Input Change The following pages contain instructions for Atlas transfer case front input. Most mechanically inclined individuals can obtain the components from us and perform these retrofits
400 x 8 HUBS 4 HOLE HUBS
400 x 8 HUBS HUB - 4001 400 x 8 Tire, Hub and Bearing HUB - S402 Spindle HUB - B403 Bearing - LM44643 HUB - R404 Race - BM44610 HUB - S405 Seal HUB - S406 Seal - HD203025 HUB - S407 Seal - CR HD12428 HUB
DO NOT attempt to repair hub and wheel bearing assembly.
Page 1 of 6 HUB & WHEEL BEARINGS (WITH PULSE VACUUM HUBLOCK) DO NOT attempt to repair hub and wheel bearing assembly. Removal DO NOT remove hub lock assembly by prying on hub lock legs. This can crack
Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD
: R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
Meritor Trailer Products
Meritor Trailer Products Contents LM & LC...5 TA & TC...37 TE...63 TM...77 Steering Axles...105 Flexair & Flexlite...119 Indair...171 SMT...181 AXL...193 3 4 Meritor Trailer Products Axle & Brake Parts
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
4,000 6,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad
DIFFERENTIAL AND DRIVELINE
PL DIFFERENTIAL AND DRIVELINE 3-1 DIFFERENTIAL AND DRIVELINE TABLE OF CONTENTS page DESCRIPTION AND OPERATION FRONT DRIVESHAFTS...1 DIAGNOSIS AND TESTING DRIVESHAFT DIAGNOSIS....2 REMOVAL AND INSTALLATION
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive
SECTION VII PARTS BREAKDOWN
SECTION VII PARTS BREAKDOWN 21 REAR TINE TILLER MAIN ASSEMBLY ITEM # PART # QTY DESCRIPTION 1 SEE PAGE 25 1 ENGINE-RIGHT ANGLE DRIVE-PULLEY ASSEMBLY 2 SEE PAGE 27 1 FRAME-TRANSMISSION-HOUSING ASSEMBLY
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION
AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - "C", "G" & "H" Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
MOPAR 8.75 REAR DIFFERENTIAL INFORMATION
MOPAR 8.75 REAR DIFFERENTIAL INFORMATION Sure Grip is the performance type of differential that enables both rear tires to turn under power for better launch traction. Sure Grip is the Chrysler name for
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power
1993 SUSPENSION Volkswagen Front. EuroVan
Article Text ARTICLE BEGINNING 1993 SUSPENSION Volkswagen Front EuroVan DESCRIPTION FWD independent suspension is an double-wishbone type with torsion bars mounted on upper control arm. Wheel is supported
ILLUSTRATED PARTS LIST
CW11 / TW11 / TW11R WITH 340cc HONDA ENGINE 800-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side.
Illustrated Parts List
More time on the road Illustrated s List FRLO-640C-T November 0 Contents How To Use The Illustrated s List... CASE ASSY... 4 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT ASSY... 8 ELECTRONIC CONTROL UNIT...
6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle
Article Text ARTICLE BEGINNING MANUAL TRANSMISSIONS Saab 5-Speed Transaxle APPLICATION TRANSMISSION APPLICATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Vehicle Application Transmission
PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
Service Parts. John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF. Engine. Engine Models:
Service s Engine Engine Models: John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF Generator Models: 20--40ROZJ/REOZJ 20--40DSJ/DSEJ 50/60ROZJ serial nos. 257821 and above 50/60REOZJ/REOZJB 50/60DSJ/DSEJ/DSEJB
Unit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008)
Rear Wheel/Brake/Suspension 13. Rear Wheel/Brake/Suspension Service Information 13-1 Troubleshooting 13-2 Rear Wheel 13-3 Rear Cushion 13-4 Rear Swing Arm 13-7 Service Information General Safety If the
Aprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
COVERED. WE VE GOT YOU H-D EXTENDED SERVICE PLAN GET TO KNOW THE HDFS FAMILY: ASK YOUR DEALER FOR MORE INFORMATION. www.hdfsi.com
H-D EXTENDED SERVICE PLAN www.hdfsi.com WE VE GOT YOU COVERED. GET TO KNOW THE HDFS FAMILY: Harley-Davidson Insurance Harley-Davidson Extended Service Plan Harley-Davidson Debt Protection Plan Harley-Davidson
2014-2015 GM 1500 Pick-Up 4WD 4" Suspension Lift Installation Instructions
2014-2015 GM 1500 Pick-Up 4WD 4" Suspension Lift Installation Instructions www.skyjacker.com Required Tool List: * Safety Glasses * Metric / Standard Wrenches & Sockets * Allen Wrenches * Floor Jack *
DRIVE AND DRIVEN PULLEY
11 DRIVE AND DRIVEN PULLEY SCHEMATIC DRAWING ------------------------------------------------- 11-1 SERVICE INFORMATION------------------------------------------------ 11-2 TROUBLESHOOTING-----------------------------------------------------
AFE424 SERVICE PARTS
This is the parts list for the AFE. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured
How To Maintain A Gardner Dianner Pump
GARDNER DENVER 3-1-541 Rev D April, 2005 HD-2250 WELL SERVICE PUMP POWER END PARTS LIST ECN 1025185 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES Gardner
UNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
Replacement Parts Catalog
Replacement Parts Catalog Replacement Parts Contents A-Class Right Hand 4 Model Printer Assemblies... 1 Cover Assembly (15-3021-01)... 2 Display Assembly (24-2605-01)... 3 Direct Thermal (78-2474-01)...
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor 360 Automatic Chain Saw UT-10468 Page 2 of 15 Carburetor 1 93205A 1 Repair Kit 2 93205A 1 Repair Kit 3 93205A 1 Repair Kit 4 93205A 1 Repair Kit
MANUAL TRANSMISSION CONTENTS ...
22D-0-1 MANUAL TRANSMISSION CONTENTS GENERAL INFORMATION... 22D-0-3 1. SPECIFICATIONS... 22D-1-1 TRANSMISSION MODEL TABLE GENERAL SPECIFICATIONS SERVICE SPECIFICATIONS TORQUE SPECIFICATIONS............
YARD CRUISER HYDRO DRIVE SERIES 1 & 2
Parts Manual for YARD CRUISER HYDRO DRIVE SERIES 1 & MODELS YZ11BE YZ181BE YZ15BVE YZ158BVE TM CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- REAR... CASTER, FRONT WHEEL & TIRE ASSM Y.... FRONT
MAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
STX ELECTRIC TOURING MODEL CAR 1:10SCALE STX-001 SOLID AXLE PULLEY ECCENTRIC CLAMP FRONT RIGHT - REAR LEFT ST03002-1
STX STX-001 ELECTRIC TOURING MODEL CAR 1:10SCALE ST03001 SOLID AXLE PULLEY ST03001-1 SOLID AXLE KIT ST03002-1 ECCENTRIC CLAMP FRONT RIGHT - REAR LEFT ST03002-2 ECCENTRIC CLAMP FRONT LEFT - REAR RIGHT ST03003
This is the civilian transfer case with the cooling loop only found in the driven gear half of the front case.
INTRODUCTION The Transfer case used in the AMG Hummer is a New Venture Gear, model 242. This case has been in use for the H-1/Hummer since the early 1990 s. There have been modifications to the internal
6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:
Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:
CUTTER-CRUSHER RAMMER RC 22
11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics
USED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
REPAIR AND MAINTENANCE MANUAL
REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633
MANUAL TRANS OVERHAUL - TYPE 02J Article Text 1999 Volkswagen Golf This file passed thru Volkswagen Technical Site -
MANUAL TRANS OVERHAUL - TYPE 02J Article Text 1999 Volkswagen Golf This file passed thru Volkswagen Technical Site - http://volkswagen.msk.ru ARTICLE BEGINNING 1998-99 MANUAL TRANSMISSIONS Volkswagen/Audi
PET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1
Model 959 0 0 00-00 7 6:56.0.00 tool and accessories tool - 7 06 jack - 7 0 operating rod - 7 03 tool bag - 7 0 spark plug wrench - 0 A ring wrench 36 MM - - tyre pressure gauge L 709 0-999 57 05 0 rim
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
Operating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
SCION tc 2005-2008 COIL OVER SUSPENSION Preparation
SCION tc 2005-2008 COIL OVER SUSPENSION Preparation Part Number: PTR11-21070 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: Item # Quantity Reqd. Description
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
INSTRUCTIONS FXSTSB (SPRINGER) FRONT END KIT 1WARNING -J01813 REV. 10-28-99 GENERAL. INSTALLATION Bearing Races and Fork Assembly
INSTRUCTIONS -J08 REV. 0-28-99 GENERAL This kit is designed for installation on 996 to 999 FXSTSB model motorcycles. We recommend this kit be installed by a factory trained technician at an authorized
13. REAR WHEEL/BRAKE/SUSPENSION
13. REAR WHEEL/BRAKE/SUSPENSION 13 3.5~4.5kg-m 8.0~10.0kg-m 0.8~1.2kg-m 3.0~4.0kg-m 2.4~3.0kg-m 3.5~4.5kg-m 6.0~8.0kg-m 13-0 13. REAR WHEEL/BRAKE/SUSPENSION 13 REAR WHEEL/BRAKE/SUSPENSION SERVICE INFORMATION...
ALL ORIGINAL NUMBERS. MARKS AND MODELS FROM VEHICLE MANUFACTURERS LISTED IN THIS CATALOGUE ARE FOR COMPARISON PURPOSES ONLY.
Ecef ALL ORIGINAL NUMBERS. MARKS AND MODELS FROM VEHICLE MANUFACTURERS LISTED IN THIS CATALOGUE ARE FOR COMPARISON PURPOSES ONLY. ECS - 000 K0000 K000 K000 Caliper Tappet and Boot set Kaliper Toz Lastik