PLASTER CAST INSTRUMENTS
|
|
|
- Lesley Sparks
- 9 years ago
- Views:
Transcription
1 PLASTER CAST INSTRUMENTS ESMARCH Plaster Shears, 8 (20.3cm) BRUNS Plaster Shears, (24.1cm) JARIT Plaster Shears, (19.1cm), eccentric lock JARIT Plaster and Utility Shears, 8 (20.3cm), notched blade JARIT Utility Shears, one serrated blade, stainless steel with autoclavable plastic finger rings (14cm) (17.8cm) 155
2 PLASTER CAST INSTRUMENTS STILLE Plaster Shears, 15 (38.1cm) WOLFE-BOEHLER Cast Breaker, (24.8cm) HENNIG Cast Spreader, (27.3cm) JARIT 3 Prong Cast Spreader, 9 (22.8cm)
3 BONE HOLDING CLAMPS KERN Bone Holding Clamps, ratchet (14cm) (21.6cm) (Details Shown at 1 2 Size) LANE Bone Holding Clamps, ratchet (33cm) (33cm), heavy model (43.2cm) (Details Shown at 1 2 Size) JARIT Bone Reduction Forceps, speed lock, curved jaws (17.8cm) (22.8cm) 157
4 BONE HOLDING CLAMPS JARIT Bone Reduction Forceps, (14cm), curved jaws JARIT Bone Reduction Forceps, 8 (20.3cm), 2 (5.1cm) long ratchet, jaw opening from 3 8 to 4 (0.9cm x 10.1cm) (Detail Shown at 1 2 Size) JARIT Bone Reduction Forceps, 6 (15.2cm), curved
5 BONE HOLDING CLAMPS LAMBOTTE Bone Holding Clamp, 12 (30.5cm) FARABEUF-LAMBOTTE Bone Holding Clamp, (26.7cm) LEWIN Bone Holding Clamp, 7 (17.8cm) 159
6 BONE HOLDING CLAMPS JARIT Bone Holding Clamps, side angled, with speed lock (14.6cm), for small fragment, 3mm wide jaw (19cm), 7mm wide jaw (24.1cm), 10.5mm wide jaw (26cm), 11mm wide jaw (28cm), 11.5mm wide jaw (Details Shown at 1 2 Size) VERBRUGGE Bone Holding Clamp, 7 (17.8cm) small, 5mm wide jaw 160 VERBRUGGE Bone Holding Clamps (25.4cm), 10mm wide jaw (26.7cm), 11mm wide jaw (27.3cm), 12mm wide jaw (Details Shown at 1 2 Size)
7 BONE HOLDING CLAMPS ULRICH-Style Bone Holding Forceps, with speed lock (18.4cm), 2.5mm wide jaws (22.9cm), 9mm wide jaws (25.4cm), 9mm wide jaws (28cm), 9mm wide jaws (28cm) angled, 9mm wide jaws (Details Shown at 1 2 Size) LOWMAN Bone Holding Clamps, 1 x 2 prongs (12.1cm) (18.4cm) (20.3cm) (Details Shown at 1 2 Size) LOWMAN Bone Holding Clamps, 1 x 1 prongs (12.1cm) (18.4cm) (20.3cm) (Details Shown at 1 2 Size) LAMBERT-LOWMAN Bone Holding Clamps, 2 x 2 prongs (18.4cm) (20.3cm) (Details Shown at 1 2 Size) 161
8 BONE RETRACTORS AND KNIVES BENNETT Tibia Retractors, 10 (25.4cm) (4.4cm) narrow blade (6cm) wide blade BLOUNT Knee Retractor, 7 (17.8cm) BLOUNT Retractor, (26.7cm), single prong, (3.8cm) wide blade BLOUNT Retractor, (26.7cm), double prong, (4.1cm) wide blade 162 LISTON Amputating Knives (16.5cm) blade (21.6cm) blade
9 BONE RETRACTORS AND SKIDS MURPHY-LANE Bone Skid, 12 (30.5cm) MEYERDING Hip and Shoulder Skid, 13 (33cm) SMILLIE Retractors (14cm), reverse curved, 1 2 wide x long blade (1.3cm x 5.4cm) (14cm), angled, 3 4 wide x long blade (1.9cm x 3.5cm) (14cm), angled, 3 4 wide x 2 long blade (1.9cm x 5.1cm) (14cm), angled, 3 4 wide x long blade (1.9cm x 6cm) (14cm), curved, 1 2 wide x 5 8 long blade (1.3cm x 1.6cm) HAYES Hand Retractors (13.3cm), blade 1 2 x (1.3cm x 3.8cm) (16cm), blade 1 2 x (1.3cm x 3.8cm) 163
10 BONE RETRACTORS MINI-HOHMANN Retractors, (15.9cm) mm wide blade mm wide blade HOHMANN Retractor (12.1cm), 16mm wide blade HOHMANN Retractor (22.2cm), 8mm wide blade HOHMANN Retractor 6 (15.2cm), 15mm wide blade HOHMANN Retractors (23.5cm), 10mm wide blade (23.5cm), 18mm wide blade (23.5cm), 25mm wide blade (23.5cm), 43mm wide blade (24.8cm), 70mm wide blade 164 AUFRANC Cobra Retractors, (26cm), 32mm wide blade Pointed tip, serrated Blunt tip, serrated Blunt tip, smooth
11 BONE RETRACTORS DEEP RAKE Retractors, Lamb handle, 11 (28cm), 4 blunt prongs, wide (5.7cm) deep (3.8cm) deep (5.1cm) deep (6.4cm) deep (7.6cm) INITIAL INCISION Retractor includes: Frame ( ), 2 blades ( ) and ( ), and weight on chain ( ) Frame only Short blade: 1 wide x deep (2.5cm x 3.2cm) Long blade: 1 wide x deep (2.5cm x 3.8cm) Short blade: 1 wide x 3 deep (2.5cm x 7.6cm) Long blade: 1 wide x 3 deep (2.5cm x 7.6cm) Short blade: 1 wide x 4 deep (2.5cm x 10.1cm) Long blade: 1 wide x 4 deep (2.5cm x 10.1cm) Short blade: 1 wide x 5 deep (2.5cm x 12.7cm) Long blade: 1 wide x 5 deep (2.5cm x 12.7cm) Weight on chain 165
12 BONE RETRACTORS HORIZONTAL Retractor, 12 (30.5cm), 4 x 2 prongs VERTICAL Retractor, 13 (33cm), 3 x 4 prongs 166 LEAD hand, malleable Adult Pediatric
13 BONE RONGEURS BLUMENTHAL Rongeurs, 6 (15.2cm), 2mm bite FRIEDMAN Rongeurs, 4mm bite (11.4cm) (13.3cm) Straight Curved LUER Rongeurs, 7 (17.8cm), 8mm bite 167
14 BONE RONGEURS SHEARER Chicken Bill Rongeurs (14cm), 3.5mm bite (16.5cm), 4mm bite REINER Rongeurs, 7 (17.8cm) mm bite mm bite mm bite Straight Half curved Full curved HARTMAN Rongeurs, (14.6cm), 4.5mm bite
15 BONE RONGEURS BANE Rongeurs, 7 (17.8cm) mm bite mm bite LEMPERT Rongeurs, 2.5mm bite (15.9cm), straight (15.9cm), curved (19.1cm), straight (19.1cm), curved JUERS-LEMPERT Rongeur, (19.7cm), curved handle, 3mm bite 169
16 BONE RONGEURS DEAN Rongeur, (14.6cm), 4mm bite CICHERELLI Rongeur, (16.5cm), 3.5mm bite ADSON Rongeurs, (21cm) mm bite mm bite, serrated cup jaws Straight Curved CUSHING Rongeurs, 8 (20.3cm), 6mm bite
17 BONE RONGEURS JARIT-RUSKIN Rongeurs (15.2cm), straight, 2mm bite (15.2cm), curved, 2mm bite (14.6cm), full curved, 3mm bite (15.2cm), curved, 4mm bite BEYER Rongeur, 7 (17.8cm), 3mm bite JANSEN-ZAUFEL Rongeur, 7 (17.8cm), 4mm bite 171
18 BONE RONGEURS RUSKIN Rongeurs, (18.4cm) Straight, 5mm bite Curved, 5mm bite Straight, 6mm bite Curved, 6mm bite RUSKIN-JAY Rongeur, 8 (20.3cm), heavy duty, curved, 6mm bite RUSKIN Angular Duckbill Rongeur, (18.4cm), 6mm bite
19 BONE RONGEURS STILLE-LUER Rongeurs, straight, 10mm bite (21.6cm) (26.7cm) STILLE-LUER Rongeurs, curved, 10mm bite (21.6cm) (26.7cm) STILLE-LUER Angular Duckbill Rongeur, 9 (22.8cm), 6mm bite 173
20 BONE RONGEURS mm bite mm bite mm bite ECHLIN Angular Duckbill Rongeurs, 9 (22.8cm) STILLE-LUER-ECHLIN Angular Duckbill Rongeur, 9 (22.8cm), 6mm bite mm bite mm bite mm bite LEKSELL Rongeurs, 9 (22.8cm), slight curve mm bite mm bite mm bite LEKSELL Rongeurs, 9 (22.8cm), full curve
21 BONE RONGEURS Straight Half curved Full curved SMITH-PETERSEN Laminectomy Rongeurs, (24.1cm), 3.5mm bite SAUERBRUCH Rib Rongeurs, (29.2cm), square bite (1.6cm) wide jaw (1.9cm) wide jaw DALE Thoracic Rongeur, (36.8cm), 3mm bite 175
22 BONE CUTTING FORCEPS JARIT-LISTON Bone Cutting Forceps, (14.6cm) Straight Up-angled Down-curved Straight Up-angled RUSKIN-LISTON Bone Cutting Forceps, (18.4cm) Straight Up-angled RUSKIN-LISTON Bone Splitting Forceps, (18.4cm), narrow jaw LITTAUER-LISTON Bone Cutting Forceps, 6 (15.3cm)
23 BONE CUTTING FORCEPS Straight Up-angled STILLE-LISTON Bone Cutting Forceps, (26.7cm) STILLE-HORSLEY Rongeur, 10 (25.4cm), S-shaped LISTON Bone Cutting Forceps (14cm), straight (16.5cm), straight (19.1cm), straight (14cm), up-angled (16.5cm), up-angled (19.1cm), up-angled 177
24 BONE CURETTES BRUNS Oval Cup Curettes, straight (17.1cm) 8 (20.3cm) Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size 6 9 (22.9cm) Size Size Size Size Size Size Size Size Size Size Size BRUNS Oval Cup Curettes, angled tip 8 (20.3cm) 9 (22.9cm) Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size Size 6
25 BONE CURETTES Size Size Size Size Size Size Size Size Size Size Size 6 SPINAL Fusion Curettes, 9 (22.9cm), reverse angle Size Size Size Size Size Size Size Size Size 6 BRUNS Oval Cup Curettes, 9 (22.9cm), straight, solid hexagonal handle SEMMES (HOWARD) Spinal Curettes, 9 (22.9cm), 4 x 7 mm cup Straight Slight Angle Acute Angle Straight COBB-Type Oval Cup Curettes, 11 (27.9cm), hollow knurled handle Angled Tip Size Size Size Size Size Size Size Size Size 6 179
26 BONE CURETTES AND HOOKS JARIT Bone Hooks, 9 (22.9cm) (9.5mm) hook (19mm) hook (25mm) hook BOYES-GOODFELLOW Hooks, (21cm), modified points, VOLKMAN Bone Curettes, double ended (12.7cm), one round and one oval cup, 10.5mm and 6.3mm x 6.8mm (16.5cm), two oval cups, 7.5mm x 14mm and 9mm x 22mm (16.5cm), one round and one oval cup, 14mm and 7mm x 9mm (20.3cm), one round and one oval cup, 17.5mm and 9mm x 11mm 180 SCOVILLE Disc Curettes, 10 (25.4cm), 4 x 10mm cup Straight Reverse angled Angled
27 BONE CURETTES CONE Ring Curettes, (21.9cm) Straight, Size 1, 8mm diameter Straight, Size 2, 6mm diameter Straight, Size 3, 3mm diameter Angular, Size 1, 8mm diameter Angular, Size 2, 6mm diameter Angular, Size 3, 3mm diameter Angle Angle JARIT-CONE Ring Curettes, 9 (22.9cm), 8mm cup Size Size Size 0 EPSTEIN Spinal Fusion Curettes, 8 (20.3cm), reverse angle 181
28 STERILIZING RACKS LAMBOTTE Sterilizing Rack, stainless steel, holds 12 Jarit Lambotte 9 osteotomes, rack size: 3 x x (7.6cm x 18.7cm x 28.3cm) HIBBS-BRUNS Sterilizing Rack, stainless steel, holds 12 Jarit Hibbs chisels, gouges and osteotomes, or 12 Jarit Bruns 9 curettes, rack size: x x (6.4cm x 18.7cm x 28.3cm) BRUNS Sterilizing Rack, stainless steel, holds 12 Jarit Bruns curettes, rack size: x x (6.4cm x 18.7cm x 23.5cm)
29 STERILIZING RACKS SMITH-PETERSEN Sterilizing Rack, stainless steel, holds 7 Jarit Smith-Petersen 8 gouges, osteotomes, rack size: 2 x x (5.1cm x 27cm x 25.1cm) COBB Sterilizing Rack, stainless steel, holds 9 Jarit Cobb-Type 11 instruments, rack size: x 14 x (4.4cm x 35.6cm x 33.7cm) HOKE Sterilizing Rack, stainless steel, holds 6 Jarit Hoke 5 osteotomes, rack size: x x 7 (3.8cm x 14.6cm x 17.8cm) 183
30 BONE CHISELS, GOUGES AND OSTEOTOMES HIBBS Chisels, (24.1cm), straight (6mm) (9mm) (12mm) (16mm) (19mm) (22mm) (25mm) (29mm) (32mm) (38mm) HIBBS Chisels, (24.1cm), curved (6mm) (9mm) (12mm) (16mm) (19mm) (22mm) (25mm) (29mm) (32mm) (38mm) 184 HIBBS Osteotomes, (24.1cm), straight (6mm) (9mm) (12mm) (16mm) (19mm) (22mm) (25mm) (29mm) (32mm) (38mm)
31 BONE CHISELS, GOUGES AND OSTEOTOMES HIBBS Osteotomes, (24.1cm), curved (6mm) (9mm) (12mm) (16mm) (19mm) (22mm) (25mm) (29mm) (32mm) (38mm) HIBBS Gouges, (24.1cm), straight (6mm) (9mm) (12mm) (16mm) (19mm) (22mm) (25mm) (29mm) (32mm) (38mm) HIBBS Gouges, (24.1cm), curved (6mm) (9mm) (12mm) (16mm) (19mm) (22mm) (25mm) (29mm) (32mm) (38mm) 185
32 BONE CHISELS, GOUGES AND OSTEOTOMES SMITH-PETERSEN Osteotomes, 8 (20.3cm), straight (6mm) (9mm) (12mm) (16mm) (19mm) (25mm) (32mm) SMITH-PETERSEN Osteotomes, 8 (20.3cm), curved (6mm) (9mm) (12mm) (16mm) (19mm) (25mm) (32mm) SMITH-PETERSEN Gouges, 8 (20.3cm), straight (6mm) (9mm) (12mm) (16mm) (19mm) (25mm) (32mm) 186 SMITH-PETERSEN Gouges, 8 (20.3cm), curved (6mm) (9mm) (12mm) (16mm) (19mm) (25mm) (32mm)
33 BONE CHISELS, GOUGES AND OSTEOTOMES COBB-Type Spinal Gouge, 11 (28cm), straight, 9 32 (7.5mm) wide COBB-Type Spinal Gouge, 11 (28cm), medium curved, 9 32 (7.5mm) wide COBB-Type Spinal Gouge, 11 (28cm), strong curved, 9 32 (7.5mm) wide COBB-Type Spinal Gouge, 11 (28cm), reverse curved, 9 32 (7.5mm) wide 187
34 BONE CHISELS, GOUGES AND OSTEOTOMES COBB-Type Spinal Gouges, (24cm), hollow hexagonal handle, 5 16 (8mm) wide Straight Medium curved Strong curved Reverse curved COBB-Type Spinal Elevators, 11 (28cm) (9mm) blade (12mm) blade (19mm) blade (25mm) blade (32mm) blade 188 COBB-Type Spinal Elevators, (24cm), solid hexagonal handle (9mm) blade (12mm) blade (19mm) blade
35 BONE CHISELS, GOUGES AND OSTEOTOMES LAMBOTTE Osteotomes, 9 (22.9cm), straight (6mm) (12mm) (19mm) (25mm) (32mm) (38mm) LAMBOTTE Osteotomes, 9 (22.9cm), curved (6mm) (12mm) (19mm) (25mm) (32mm) (38mm) HOKE Osteotomes, (14cm), straight (3mm) (5mm) (6mm) (8mm) (9mm) (12mm) (16mm) HOKE Osteotomes, (14cm), curved (3mm) (5mm) (6mm) (8mm) (9mm) (12mm) (16mm) 189
36 BONE CHISELS, GOUGES AND OSTEOTOMES BONE AWL (14cm) STILLE-Type Osteotomes, 8 (20.3cm) (9mm) (14mm) (18mm) (22mm) STILLE-Type Gouges, 8 (20.3cm) (9mm) (14mm) (18mm) (22mm) 190 STILLE-Type Chisels, 8 (20.3cm) (9mm) (14mm) (18mm) (22mm)
37 OSTEOTOMES AND MALLETS JARIT Hand Surgery Osteotome Set, includes: 7 osteotomes, 5 (12.7cm) long, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm wide, nylon capped mallet, in canvas roll JARIT Hand Surgery Osteotomes, 5 (12.7cm), curved (2mm) (4mm) (6mm) (8mm) (10mm) (12mm) (14mm) JARIT Hand Surgery Osteotomes, 5 (12.7cm), straight (2mm) (4mm) (6mm) (8mm) (10mm) (12mm) (14mm) JARIT Mallet, ( 18.7cm), anodized aluminum handle replaceable nylon caps, head: weight 4 oz., diameter 1 (2.5cm) replaceable nylon cap and 1 stainless facing, head: weight 5 oz., diameter 1 (2.5cm) NYLON Cap for and
38 MALLETS KIRK Mallet, (19cm) bronze head, head: weight 1 lb. 2oz., diameter (3.8cm) JARIT ORTHOPEDIC Mallet, (18.3cm),. head: weight 1 lb., diameter (3.0cm) (19.3cm), head: weight 2 lbs., diameter (3.8cm) BONE Mallet, 11 (28cm), lightweight, head: weight 1 lb., diameter (3.5cm) BONE Mallet, 11 (28cm), heavyweight, head: weight 2 lbs., diameter 2 (5.1cm)
39 MALLETS LUCAE Mallet, 8 (20.3cm), head: weight 5oz., diameter 1 (2.5cm) JARIT Ball Pean Hammer, (19cm), head: weight 8oz., small face diameter (1.1cm) face diameter 3 4 (1.9cm) (22.9cm), head: weight 13oz., large face diameter 1 (2.5cm) face diameter 7 8 (2.2cm) MEAD Mallet, (19cm), 2 replaceable nylon caps, head: weight 6oz., diameter (2cm) NYLON cap for KIENE Bone Tamp, 6 (15.2cm), tip 10mm diameter BONE TAMP Serrated tip, (15.9cm), tip 2mm diameter tip 3mm diameter tip 4mm diameter tip 5mm diameter tip 6mm diameter tip 8mm diameter tip 10mm diameter 193
40 PERIOSTEAL ELEVATORS KEY Elevators, solid hexagonal handle (3mm) wide, (17.5cm) (6mm) wide, (17.5cm) (9mm) wide, (18.7cm) (13mm) wide, (19cm) (16mm) wide, (19cm) (19mm) wide, 8 (20.3cm) (25mm) wide, (21.3cm) SCOTT-McCRACKEN Elevators (13mm) wide, (17.1cm) (19mm) wide, (17.1cm) (13mm) wide, (21.6cm) (19mm) wide, (21.6cm) CREGO Elevators, 8 (20.3cm) mm wide, inside radius mm wide, inside radius mm wide, inside radius 194 CHANDLER Elevators (19cm), maximum blade width 13mm (20.3cm), maximum blade width 20mm (22.9cm), maximum blade width 25mm (25.4cm), maximum blade width 31mm
41 PERIOSTEAL ELEVATORS LANGENBECK Elevator, (21cm), blade 6.5mm wide LANGENBECK Elevator, (19.8cm), blade 17.5mm wide LANE Elevator, (19cm), blade 7mm wide LANE Elevator, (19cm), blade 10mm wide 195
42 PERIOSTEAL ELEVATORS SAYRE Elevator, (17.1cm), double ended, sharp, blade 9.5mm wide SAYRE Elevator, (17.1cm), double ended, blunt, blade 9.5mm wide MCGLAMRY Elevators, (16.5cm), sharp mm blade mm blade mm blade mm blade SEDILLOT Elevator, (19cm), blade 19mm wide
43 RASPATORIES MATHIEU Raspatory, (15.9cm), straight blade 11.7mm wide FARABEUF Raspatory, (15.9cm), straight blade 13mm wide FARABEUF Raspatory, (15.9cm), curved blade 13mm wide FARABEUF Raspatory, (19cm), double ended, straight and curved blades 13mm wide 197
44 BONE SAWS GIGLI Wire Saw Blades, Stille-type, package of (30.5cm) (40.6cm) (50.8cm) GIGLI Saw Handles, loop style, pair GIGLI Saw Handles, solid, pair BAILEY Gigli Saw Guide, 13 (33cm) SATTERLEE Saw, 8 (20.3cm) BLADE only for
45 BONE SAWS, RASPS AND RETRACTOR LANGENBECK Metacarpal Saw, 9 (22.9cm), blade (11.4cm) SWEET Amputation Retractor PUTTI Rasps, double ended, (30.5cm), one round blade and one half-round blade (26.6cm), flat blades, one blade curved up and one blade curved sideways MILLER Rasp, 7 (17.8cm), double ended BONE File, (24.1cm), half-round blade 199
46 CARTILAGE AND TENDON INSTRUMENTS SMILLIE Meniscus Knives, (17.1cm) Straight edge Left Right MARTIN Cartilage Scissors, 8 (20.3cm), curved, serrated MARTIN Cartilage Clamp, 7 (17.8cm)
47 CARTILAGE AND TENDON INSTRUMENTS JARIT Meniscus Clamp, (18.4cm) JARIT Cartilage Clamp, 8 (20.3cm), curved Delicate Heavy DINGMAN Cartilage Clamps, (19cm) PRESTON Ligamentum Flavum Forceps, (18.4cm) 201
48 CARTILAGE AND TENDON INSTRUMENTS LOCKE Phalangeal Forceps, 6 (15.2cm), serrated jaws, 1 x 2 teeth JARIT Sesamoidectomy Clamp, (16.5cm), curved JARIT Tendon Pulling Forceps, curved shaft, 5 (12.7cm), serrated jaws, alligator action JARIT Small Bone Holding Clamp, 6 (15.2cm), serrated jaws
49 CARTILAGE AND TENDON INSTRUMENTS (15.2cm) (19cm) (24cm) BRAND Tendon Pulling Forceps, 2 x 3 teeth JARIT Tendon Passing Forceps, 6 (15.2cm) mm pointed tip, straight mm pointed tip, curved BUNNELL Tendon Passers and Forwarding Probes, (18.7cm) (22.5cm) KLEINERT-KUTZ Tendon Retriever, 8 (20.3cm), serrated, 1 x 2 teeth JARIT Finger Goniometer, (14cm) 203
50 BONE DRILLS MOORE Bone Drill HAND DRILL 10 cannulated, 3-jaw stainless Jacobs chuck, accepts wire/pin up to 6.35mm ( 1 4 ), aluminum body with offset handle HAND DRILL 6 cannulated, 3-jaw stainless Jacobs chuck, accepts wire/pin up to 6.35mm ( 1 4 ), aluminum body with offset handle BUNNELL Hand Drill, with Jacobs chuck
51 WIRE TWISTERS JARIT Wire Pulling Forceps, (16.5cm), maximum capacity 1mm CORWIN Wire Twister, 6 (15.2cm), CARB-BITE jaws JARIT Sternal Needle Holder and Wire Twisters, CARB-BITE jaws (12.7cm) (17.8cm) (19.7cm), heavy duty 6mm wide jaws JARIT Wire Twisters, 6 (15.2cm), CARB-BITE jaws Short delicate jaws Short blunt jaws 205
52 PIN CUTTERS JARIT-HERCULES SUPERCUTTER, Multi-leveraged design multiplies power transfer to the cutting blades Requires 40% less energy than ordinary multiple-action wire cutters Makes a clean, precise cut on K-wires Strong, yet light-weight stainless steel construction Tungsten-Carbide blades are replaceable U.S. Patent No. 4,891, (22.9cm) length maximum capacity (3mm) REPLACEMENT Blade Kit for includes: 1 pair Tungsten Carbide blades 4 screws 1 hexagonal key PROTECTIVE Shield for , set of (17.8cm) length maximum capacity.087 (2.2mm) REPLACEMENT Blade Kit for includes: 1 pair Tungsten Carbide blades 4 screws 1 hexagonal key PROTECTIVE Shield for , set of JARIT Pin Cutter, (15.9cm), maximum capacity.079 (2mm)
53 WIRE CUTTERS JARIT Wire Cutters, up-angled, CARB-EDGE jaws (17.8cm), maximum capacity-.067 (1.7mm) (21.6cm), maximum capacity-.098 (2.5mm) JARIT Flush Wire Cutter, 7 (17.8cm) CARB-EDGE jaws, maximum capacity.067 (1.7mm) JARIT Wire Cutter, 7 (17.8cm), side cutting, CARB-EDGE jaws, maximum capacity.059 (1.5mm) 207
54 PIN CUTTERS AND WIRE CUTTERS JARIT Cannulated Pin Cutter, (19cm), end-cutting, maximum capacity.062 (1.6mm) JARIT Large Pin Cutter, 22 (55.6cm), cuts rods up to.250 (6.3mm), toggle joint transfers leverage to the cutting blades
55 PLIERS JARIT Slip Joint Adjustable Pliers, (19.7cm) JARIT Parallel Pliers, 7 (17.8cm), grooved 10mm wide jaws for pin removal JARIT Parallel Pliers with Side Cutter, 7 (17.8cm), grooved 10mm wide jaws for pin removal, maximum capacity.062 (1.6mm) 209
56 PLIERS JARIT Needle Nose Pliers, (13cm), grooved jaws, tips taper to 1mm JARIT Flat Nose Pliers, 6 (15.2cm), tips taper to 2mm JARIT Flat Nose Pliers, (16.5cm) side cutting blades, tips taper to 3.5mm
57 PLIERS AND CALIPER JARIT Heavy Duty Locking Pliers, reinforced jaw hinge, self-locking lever with adjustment screw and one-handed quick release (17.1cm), 7mm wide tip (20.3cm), 9mm wide tip (24.1cm), 13mm wide tip JARIT Heavy Duty Locking Pliers, reinforced jaw hinge, self-locking lever with adjustment screw and one-handed quick release (21.9cm), 5mm wide tip ( 24.1cm), 5mm wide tip (29.2cm), 7mm wide tip TOWNLEY Femur Caliper, (11.4cm) 211
www.contactodent.com.pt ( PULSA AQUI )
Periotomes 2mm 3mm 2mm 2mm MI-861-00 Set of 4 MI-861-01 Golden MI-861-02 MI-861-03 MI-861-04 Blue Fig. 3 Mirror/Satin Fig. 4 Multicolor Periotomes MI-816-01 MI-816-02 MI-816-00 Periotomes Set of 2 S1 Implant
WIRE AND PIN MANAGEMENT
WIRE AND PIN MANAGEMENT SECTION S To store, autoclave, dispense, insert, hold, bend, pull, twist, cut, and tighten K-wires, guidewires, Steinmann pins and rods. CONTENTS Wire Storage and Sterilization
www.contactodent.com.pt ( PULSA AQUI )
Periotomes 2mm 3mm 2mm 2mm MI-861-00 Set of 4 MI-861-01 Golden MI-861-02 MI-861-03 MI-861-04 Blue Fig. 3 Mirror/Satin Fig. 4 Multicolor Periotomes MI-816-01 MI-816-02 MI-816-00 Periotomes Set of 2 S 1
1. 3539700 Model S Slimline Dermatome Set, Complete, Universal Power Supply, 110-230 Volts. 2. DP0009 Model S Slimline Dermatome Handpiece p
Skin Graft Products Dermatomes Model S Slimline Electric Dermatome Kit 1 6 5 7 3 8 2 10 9 4 Slim Design, Serious Performance No. Description 1. 3539700 Model S Slimline Dermatome Set, Complete, Universal
Smith & Nephew ACUFEX and ACUFEX Pro Punches
J-1 Smith & Nephew ACUFEX and ACUFEX Pro Punches Smith & Nephew ACUFEX punches are designed with a broad range of tips and configurations allowing easy access to specific areas of the meniscus. Each linear
Sports Medicine Instruments. shoulder small joint hip knee. Our Strengths Become. Your Solutions
Sports Medicine Instruments shoulder small joint hip knee Our Strengths Become Your Solutions Standard Arthroscopy Handle Infinite Pressure Lock Handle Symmetry Medical Inc. is recognized as a full-service
Surgical scissors and forceps Product List
Surgical scissors and forceps Product List Sr. No Items Picture of Product Product specification 1 Grasping forceps-- 5 MM Grasping forceps are used to remove stones and retrieve foreign objects under
Technique Guide. Screw Removal Set. Instruments for removing Synthes screws.
Technique Guide Screw Removal Set. Instruments for removing Synthes screws. Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal of Intact
847-367-7771 BRUDER LAPAROSCOPY BRUDER 5 MM Ø LAPAROSCOPIC INSTRUMENTS BRUDER MULTI-FUNCTIONAL STYLE LAPAROSCOPIC INSTRUMENT
Serving the Medical Profession Since 1990 847-367-7771 BRUDER LAPAROSCOPY BRUDER SURGICAL INSTRUMENTATION By ARROW MEDICAL SUPPLY INC BRUDER 5 MM Ø LAPAROSCOPIC INSTRUMENTS Bruder is one of the leaders
Surgical Instruments 101
Surgical Instruments 101 An Introduction to KMedic Certified Instruments by Helmut Kapczynski It would not have been possible to write this manual without the help and input from many professionals in
$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
VETERINARY INSTRUMENTS
Hoof and claw instruments 99 AHM-5001 Left hand Single edge AHM-5005 Right hand single edge 001 VETERINARY INSTRUMTS AHM-5002 Left hand single edge with narrow blade AHM-5006 Right hand single edge AHM-5003
Sterile, Single-use, Instruments
Sterile, Single-use, Instruments Surgitrac instruments, single-use ophthalmic and refractive instruments. Single-use instruments look and feel like a reusable, but offer so much more: Safer: sterile, ready-to-use,
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
Laparoscopic Instruments
HOW TO TEST & INSPECT Laparoscopic Instruments are used to perform minimally invasive surgical procedures. Advantages of Laparoscopic Surgery Smaller incision, resulting in shortened recovery time, reduced
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
NOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
Aesculap Surgical Instruments. Micro Instruments for Cardiac and Vascular Surgery
Aesculap Surgical Instruments Micro Instruments for Cardiac and Vascular Surgery Think Innovation. Think Aesculap. In this catalog, we are presenting a fine range of microsurgical instruments commonly
WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
VATS / MIS. Thoracoscopic Minimally Invasive Instruments
/ Thoracoscopic Minimally Invasive Instruments / Thoracoscopic Minimally Invasive Instruments Thoracoscopic Minimally Invasive Instruments / In a continuing effort to minimize patient trauma, surgical
MIN Set. Instruments for Minimally Invasive Neurosurgery. Aesculap Neurosurgery
MIN Set Instruments for Minimally Invasive Neurosurgery Aesculap Neurosurgery MIN Set Features Fine instrument tips Especially important when working in very narrow spaces and close to sensitive structures.
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
LASER INSTRUMENTATION
509201 509202 509204 509205 509206 509207 509203 LASER INSTRUMENTATION Laser Instrumentation (Ebonized) Ossoff-Karlan Laser Instruments Pilling recoends the Ossoff-Karlan Laser Instrumentation presented
The specialists in single-use. Refractive
The specialists in single-use. Refractive Flap Separators/Elevators 77 LASIK Flap Elevator, Curved, 8mm 0.mm 0.5mm Tip, Curved 8mm Tapered Shaft at 90. 8mm 78 435 LASIK Flap Elevator, Straight, 8mm LASIK
Contents. Sinus Forceps for Microsurgical Operations...SIN-180 EXPLORENT SURGICAL INSTRUMENTS. Through-Cutting Forceps...
Contents EXPLORENT SURGICAL INSTRUMENTS Antrum Irrigation Cannulas...SIN-105 Antrum Rasps...SIN-110 Ostium Seekers, Bougies...SIN-115 Needles, Elevators, Knives...SIN-120 Antrum Curettes...SIN-125 Sinuscopy
The specialists in single-use. LASIK/LASEK/PRK/Cross-Linking
The specialists in single-use. LASIK/LASEK/PRK/Cross-Linking Flap Separators/Elevators 77 LASIK Flap Elevator, Curved, 8mm 0.2mm 0.5mm Tip, Curved 8mm Tapered Shaft at 90. 8mm 78 435 LASIK Flap Elevator,
Ceta Form Tool Containers & Assortments
Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Precision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
TopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
5.5 mm 5 mm 5.5 mm. 41-0112 17 cm, 6¾" 41-0150 41-0151 41-0152 41-0153 41-0154 41-0155 41-0156
Elevatorien Elevators Elevadores Elevateurs 41 5.5 mm 5 mm 5.5 mm 5 mm 2.8 mm 5 mm 7 mm 41-0100 14 cm, 5½" 41-0102 15 cm, 6" 41-0104 15 cm, 6" Williger 41-0112 Williger 41-0114 16.5 cm, 6½" Williger 41-0110
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
PARTS FOR OTHER EMBROIDERY MACHINES
PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6
Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.
Modular Sternal Cable System. Flexibility and strength in sternal closure and repair. Multiple closure options Stable fixation in all configurations Improved strength and flexibility compared to wire Modular
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Mechanical Reasoning Review
Mechanical Reasoning Review Work can be made easier or faster through practical applications of simple and/or compound machines. This is called mechanical advantage - in other words, using the principal
HONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
INTRODUCTION Cerclage Cable Vs. Monofilament Wire
B M P CABLE S Y S T E M S U R G I C A L TECHNIQUE INTRODUCTION The Biomet Medical Products (BMP ) Cable System provides a cost effective and simple method of trochanteric reattachment, fracture fixation,
FORWARD. Ernest A. Beck April 4, 1911 - January 28, 1984. Costa Mesa, CA 92627
FORWARD Our founder, and father, Ernest A. Beck apprenticed in the worlds largest and internationally renowned German surgical instrument manufacturer. When Ernie returned home to the United States, he
VariAx Distal Radius Locking Plate System. Anatomical & Universal Volar Plates Dorsal Plates Fragment Specific Plates
VariAx Distal Radius Plate System Anatomical & Universal Volar Plates Dorsal Plates Fragment Specific Plates System Module The NEW VariAx Distal Radius Plating System represents the Next Generation of
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
The information contained in this document is intended for healthcare professionals only.
The information contained in this document is intended for healthcare professionals only. Dall-Miles Cabling System Dall-Miles Recon and Trauma Cable System Trochanteric Reattachment Using the Trochanteric
Technique Guide. Orthopaedic Cable System. Cerclage solutions for general surgery.
Technique Guide Orthopaedic Cable System. Cerclage solutions for general surgery. Table of Contents Introduction The Orthopaedic Cable System 2 Indications 4 Contraindications 4 Surgical Technique Cerclage
GLOBE NEWS. LASIK - What are my Choices? A COMPREHENSIVE SELECTION OF INSTRUMENTS FROM KATENA. Katzen Flap Unzipper FOR OPHTHALMIC PROFESSIONALS
GLOBE NEWS VOLUME 9 NUMBER 1 FOR OPHTHALMIC PROFESSIONALS LASIK - What are my Choices? A COMPREHENSIVE SELECTION OF INSTRUMENTS FROM KATENA The growth of LASIK surgery has dramatically increased during
Technique Guide. 3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP). For minimally invasive osteosynthesis.
Technique Guide 3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP). For minimally invasive osteosynthesis. Table of Contents Introduction 3.5 mm and 4.5 mm Curved Locking Compression 2 Plates (LCP)
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
Double Bone Plug Meniscus Reconstruction Surgical Technique
Double Bone Plug Meniscus Reconstruction Surgical Technique Double Bone Plug Meniscus Low Profile Reamer 2-0 FiberWire Meniscus Repair Needles Collared Pin & Coring Reamer Set RetroConstruction Drill Guide
V-TEK IVP System 2.7 System 4.0
V-TEK IVP System Ankle 2.7 Fix System 4.0 Surgical Technique Surgical Technique Titanium osteosynthesis system for tibio-talar and tibio-talo-calcaneal fusion SECTION 1 Ankle Fix System 4.0 Titanium osteosynthesis
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
OD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
ORTHODONTIC MINI IMPLANTS Clinical procedure for positioning. Orthodontics and Implantology
ORTHODONTIC MINI IMPLANTS Clinical procedure for positioning Orthodontics and Implantology 2 All rights are reserved. Any reproduction of the present publication is prohibited in whole or in part and by
Technique Guide. Reamer/Irrigator/Aspirator (RIA). For intramedullary reaming and bone harvesting.
Technique Guide Reamer/Irrigator/Aspirator (RIA). For intramedullary reaming and bone harvesting. Table of Contents Introduction Reamer/ Irrigator/ Aspirator (RIA) 2 Indications 4 Surgical Technique Preparation
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 [email protected]. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Sheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
Makes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
MEDACTA UNCONSTRAINED SCREW TECHNOLOGY. Surgical Technique. Hip Knee Spine Navigation
.U.S.T. MEDACTA UNCONSTRAINED SCREW TECHNOLOGY Hip Knee Spine Navigation M.U.S.T. Hip Knee Spine Navigation CAUTION Federal law (USA) restricts this device to sale distrribution and use by or on the order
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
Metal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
Cable System. For Orthopaedic Trauma Surgery.
Cable System. For Orthopaedic Trauma Surgery. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Image intensifier
Trillium 40 Axis Spring Tensioner Wire Replacement Instructions
Trillium 40 Axis Spring Tensioner Wire Replacement Instructions 1 Overview The objective is to replace the broken axis spring tensioner wire. This requires the following tasks: 1. Remove the seismometer
Gear PEPSI CAN STOVE INSTRUCTIONS
Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
CHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure
Orthopedic Foot Instruments. Dedicated instruments for reconstructive foot surgery.
Orthopedic Foot Instruments. Dedicated instruments for reconstructive foot surgery. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by
INSTRUMENT IDENTIFICATION AND STERILIZATION TABLE OF CONTENTS
INSTRUMENT IDENTIFICATION AND STERILIZATION TABLE OF CONTENTS PACKAGING INSTRUCTIONS DRAPE-SIZES AND CUTTING 3 DRAPE FOLDING -5 PACKS 6-8 PACK WRAPPING 9-0 GOWN FOLDING GENERAL PACKAGING TIPS DO Place
Panel/Hand Saw Kit Assembly Instructions
Panel/Hand Saw Kit Assembly Instructions PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE BEGINNING Brief Summary You will be performing the following Tasks: 1. Determining the degree of shaping laying out
To Use any command in this guide: 1. Select the option from the Design Menu in the Mechanical Eng workspace.
120 1 ME Mechanical Engineers use a variety of mechanical drawings and computer tools for analysis and design. During the design process, drawings are used throughout to develop and document the design
Product # Overall Length Claw Blade Width Head Width Weight 55-099 18 in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.
Stanley Hand tools stanley Fubar Forcible entry tools Forcible entry tool designed by responders for vehicle extrication and extreme demolition. 8-in-1 tool for prying, splitting, board bending and striking
SUCTION, ASPIRATING TUBES
162300 536204 162345 162301 (shown twice size) Yankauer Suction Tubes YANKAUER SUCTION TUBES Standard adult size. 10 mm diameter. Tip has 2 mm central opening and four 2 mm side openings. 162300 12 1/2"
INTRODUCTION TO OSTEO-TI IMPLANTS; A NURSES MANUAL
INTRODUCTION TO OSTEO-TI IMPLANTS; A NURSES MANUAL Osteo-Ti INTRODUCTION This handbook has been designed to give you a basic understanding of dental implants and related surgery procedures. As with all
ENDO REMOVAL SYSTEM Set of endodontic micro instruments for removing broken canal instruments
WWW.CERKAMED.COM ENDO REMOVAL SYSTEM Set of endodontic micro instruments for removing broken canal instruments by K. Gonczowski WWW.ENDO-RS.COM Krzysztof Gończowski DDS, PhD Specialist of Conservative
Assembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights... 2-3 BARREL COMPONENTS... 4-5 BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS...
PHaSES: Practical Hands-on Surgical Education System
U.S. Toll Free 866-GOLIMBS PHaSES Range PHaSES: Practical Hands-on Surgical Education System Limbs & Things is pleased to introduce the PHaSES Range. The range is based upon our well known basic & general
589 Davies Drive York, PA 17402 toll-free phone 866-854-8300 toll-free fax 866-854-8400 phone 717-840-9335 fax 717-840-9347 email surgical@miltex.
I n s t r u m e n t s f o r D e n ta l I m p l a n t s 589 Davies Drive York, PA 17402 toll-free phone 866-854-8300 toll-free fax 866-854-8400 phone 717-840-9335 fax 717-840-9347 email [email protected]
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST REVISED 5/14/13 (per AVM Student Handbook) Tools are not needed the first day of class but are required by the second week of the semester. TOOLS Under
Technical data. Assembly: Introduction. Before starting construction. Equipment needed. Glider or Electro Glider?
Palio pro S2084 Technical data Wing span: Lenght: Weight: Wing area: Wing loading: El. Motor/ no. of cells: Controls: Introduction 2150 mm 1150 mm 1120 g 1860 g 42 dm2 27 g/dm2 44 g/dm2 600 / 7-8 cells
How To Use A Phoenix Retrograde Femoral Nail
Phoenix Retrograde Femoral Nail System Featuring CoreLock Technology Surgical Technique Contents Introduction... Page 1 Indications... Page 2 Design Features... Page 3 Surgical Technique... Page 6 Product
HOW TO BUILD A LOU-VEE-AIRCAR
HOW TO BUILD A LOU-VEE-AIRCAR MATERIALS (PER CAR) 1. One sheet of legal-sized paper 2. Three standard paper clips 3. One butterfly paper clip 4. One plastic soda straw 5. Two large index cards 6. Narrow
MINI FRAGMENT SYSTEM. Instruments and implants for 1.5 mm, 2.0 mm, and 2.4 mm plate fixation PRODUCT OVERVIEW
MINI FRAGMENT SYSTEM Instruments and implants for 1.5 mm, 2.0 mm, and 2.4 mm plate fixation PRODUCT OVERVIEW TABLE OF CONTENTS INTRODUCTION Mini Fragment System 2 PRODUCT INFORMATION Plates 4 Screws 6
PRISLISTE - SPERO NORGE AS Plus Line - 2015 RE : (compact) AU- 2A Dato : Des. 31, 2014
3 02-211- 719BMF 19PC 1/4" Dr. Socket Set w/swivel Universal Ratchet Wrench-6PT-Metric (4,4.5,5,5.5,6,7,8,9,10,11,12,13,14mm) 857,71 3 02-311- 722BMF 22PC 3/8" Dr. Socket Set w/swivel Universal Ratchet
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct
Installation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
BÖLÜM. KALP DAMAR CErRAHİSİ ALETLERİ
BÖLÜM KALP DAMAR CErRAHİSİ ALETLERİ CARDIOVASCULAR SURGERY INSTRUMENTS Kemik ve Kaburga Makasları Bone and Rib Shears Rip Shears with drawing cut DC.10219 19 cm DC.10223 23 cm DC.10522 22 cm / 83/ 4 Gluck
Resharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
Selection & Use of Surgical Needles
Selection & Use of Surgical Needles EThALLOy * INTELLIGENT GEOMETRy ADVANCED NEEDLE COATING The Selection & Use of Surgical Needles EThICON Products needles are manufactured in a wide range of types, shapes,
Industrial Knives and Blades
Industrial Knives and Blades Hyde Tools makes custom-tailored tools of the trade that professionals in many fields use to work quickly and precisely. There are utility knives and hand knives for flooring
CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions
Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be
Batibox TM flush-mounting boxes for dry partitions
flush-mounting boxes for dry partitions 800 51 800 42 800 53 800 54 800 42 + 800 71 800 77 Cat.Nos 1-gang boxes For 1 module 20 800 40 Drilling diameter 32 mm Depth 40 mm For 1 gang or 2 modules For wiring
THE SKELETAL SYSTEM FUNCTIONS OF THE SKELETAL SYSTEM
THE SKELETAL SYSTEM The skeleton is the body s bony framework which consists of 206 bones. The bones are made up of water(45%), calcium and phosphorous(35%) and other organic materials(20%). The calcium
Achilles Tendon Repair, Operative Technique
*smith&nephew ANKLE TECHNIQUE GUIDE Achilles Tendon Repair, Operative Technique Prepared in Consultation with: C. Niek van Dijk, MD, PhD KNEE HIP SHOULDER EXTREMITIES Achilles Tendon Repair, Operative
Hip Arthroscopy Product Guide
Hip Arthroscopy Product Guide Tissue Preserving Hip Solutions Recent advances in the knowledge of and treatment of femoroacetabular impingement have led to the development of minimally invasive techniques
CENÍK EICKEMEYER 2011 Kat.č. Popis Cena
CENÍK EICKEMEYER 2011 Kat.č. Popis Cena 050175 Fecal analyzer system COPRO-KIT, box/50 pcs 856,00 Kč 050176 Solution for fecal analyzer system, Coprosol, 2 L 560,00 Kč 050750 Bandage, self-adhesive, 5
Human Bones BROWARD COUNTY ELEMENTARY SCIENCE BENCHMARK PLAN ACTIVITY ASSESSMENT OPPORTUNITIES. Grade 4 Quarter 3 Activity 21
activity 21 Human Bones BROWARD COUNTY ELEMENTARY SCIENCE BENCHMARK PLAN Grade 4 Quarter 3 Activity 21 SC.F.1.2.1 The student knows that the human body is made of systems with structures and functions