Blue Logic Auto Release STAVANGER 2015

Transcription

1 Blue Logic Auto Release STAVANGER 2015

2 ENTREPRENEUR BACKGROUND Eirik Kloster Jacobsen Bryne Mekanikk, Hitec-Subsea, Ifokus, Oceaneering, Statoil, Blue Logic. Lars Gunnar Hodnefjell Laerdal, UDS, Hitec-subsea, Ifokus, Oceaneering, Blue Logic. Helge Sverre Eide RockWater, Halliburton, Subsea 7, Dataplan, Safetel, Ifokus, Oceaneering, Blue Logic. 2

3 VISION: One Subsea World By standard Hydraulic, Electrical and Mechanical interfaces. Mission: - Industrialising the subsea industry by standardising subsea interfaces. This opens a great technology development potential because it is possible to interchange components and equipment. 3

4 PRODUCT RANGE BLUE LOGIC: Hydraulic Interfaces Fluid and Gas Connectors Relief and Check valves Multi Purpose Pipeline Penetration System Electrical Interfaces - Subsea USB (power and communication in one interface) 50W, 500W, 2kW Mechanical interfaces - intervention Linear (Gate-valves) Rotational (Torque Tools) ROV handles Project Engineering ROV Tooling Package engineering with use of Standard Products. 4

5 5 Project Examples

6 ROV Replaceable Anode System 6

7 Project Examples 7

8 Accumulator Basket System 8

9 9

10 Valve Stab TM System Product Presentation Patent Pending

11 VALVE STAB TECHNOLOGY Qualified technology proven for 30 years in the subsea industry Based on Standard Hot stab and Ball Valve principles Compatible and interchangeable with standard Hot Stab Interfaces and design (ISO and API) Field proven Built in Standard Valve technology in both ends. Soft seals fluid flexible, liquids and gas compatible, easy to replace offshore 11

12 12 2 Valve Stab internals

13 13 PRINCIPLES

14 14

15 15

16 Blue Logic Valve Stab Receptacle 2 inch Valve Stab Receptacle with 3inch API compact Flange and Full Bore Valve Stab Shedule 160, MWP 440 Bar 16

17 Seal Cartridge Double Stem Seals Hollow Stem with Seal and Ball The Stem and Ball is melted together. Stem trust bearing and double stem seals maintain the stem in correct position. 18

18 Stab Ball surface Stab Seals Stab and Receptacle Connected Stab and and Receptacle Valves are open and locked together. 50mm flow area into 10inc SPO Flange. 19

19 20 2 Valve Stab internals

20 1 inch Auto Relase Blue Logic Valve Stab Auto Disconnect / Re-Connect System (Patent Pending)

21 1 inch Valve Stab and Receptacle 345 Bar 22

22 Pedestal with Receptacle and stab Friction Winch with 7m of Wire. Hose Stripsed to pedestal on the outside. 23

23 24 CPI Equipment on TRT today

24 25 Connected and Valves Open

25 Stab Connected System is HOT Handel on Read Flow can be down or out to the side 26

26 Stab Connected Adjustable Lock System Can be reset subsea Spring force can be adjusted 27

27 Stab Connected Stab Lock system Prevent release of stab prior to Close of Valve Function 28

28 With Out Buoyancy Connected and Hot 29

29 With Out Buoyancy locking dogs Release when Winch wire is at end (7m pay out) Helix will spin the Valve stab handle to closed pos (green). 30

30 Release of Stab Lock System for stab will release Stab when in top position. 31

31 32 3 inch Auto Release System

32 Damping Cylinder to keep level Angle Table +/- 20 Deg 33 Stab and Receptacle Receptacle Angle Table allowance for misalignment of +/- 20 degrees in all directions.

33 34 Stab and Receptacle Integrated Ball Valves on both Stab and Receptacle

34 4 Inch Flange 35 Stab and Receptacle Integrated Ball Valves on both Stab and Receptacle

35 3 Inch WECO fig x 3 Inch Piping 36 Stab and Receptacle Integrated Ball Valves on both Stab and Receptacle

36 Lock Spring Adjustable Spring release Seawater Connect and Dis-connect Cylinders 37 Stab and Receptacle Integrated Ball Valves on both Stab and Receptacle

37 Helix Spindle for open and close mechanism Swivel cadle Swivel house for Angle Table 38 Stab and Receptacle Integrated Ball Valves on both Stab and Receptacle

38 Question Contact: Helge Sverre Eide