Articlelist. Edition for Audi A8 Type D3 4E Facelift. Facelift model from 09/2005 until beginning of 2010

Transcription

1 Exterior parts Front bumper with openings for LED DRL for cars with or without headlight washer system, with or without parking sensors (PDC / Parktronik) and with or without distance radar (ACC). For cars without headlight washer system the caps 7855 are additionally needed. Into this bumper only the front grills from the Audi A8 D3 4E facelift can be inserted, see listing below. Additionally needed is the light package 7862, see listing below HPC Light package for 7871 the package includes: 2x S6 LED daytime running lights 2x fog lamps 1x wiring harness set Front bumper S8-Look for cars with or without headlight washer system, with or without parking sensors (PDC / Parktronik) and with or without distance radar (ACC). For cars without headlight washer system the caps 7855 are additionally needed. Into this bumper only the front grills from the Audi A8 D3 4E facelift can be inserted, see listing below. Incl. rectangular fog lights and mesh inserts RIM Rear apron with openings for the 4-tube sports muffler attachment part for the serial rear bumper with one big opening for the double tailpipes of the sports muffler on the left & right side HPC Front fender with air intake complete front fender for the right side, replaces the original part R HPC Front fender with air intake complete front fender for the left side, replaces the original part L HPC LED taillights set

2 Accessory parts & front grills for the front bumpers 7871 & 7876 Caps for the openings of the headlight washer system. Needed for cars without headlight washers for the bumpers 7871 & Set for the left & right side incl. glue set Front grill "Hofele" unpainted incl. mesh insert H PU Front grill "Hofele" unpainted incl. mesh insert P-H PU Front grill "V8" model 2007 V8 Front grill "V8" model 2007 P-V8 Front grill "V8" model 2008 V8 08 Front grill "V8" model 2008 P-V8 08 Front grill "V8" model 2008 Suitable for cars with parking sensors & with distance radar (ACC). CDP-V8 08

3 Front grill "W12" model 2007 W12 Front grill "W12" model 2007 P-W12 Front grill "W12" model 2007 Suitable for cars with parking sensors & with distance radar (ACC). CDP-W12 Front grill "W12" model 2008 W12 08 Front grill "W12" model 2008 P-W12 08 Front grill "W12" model 2008 Suitable for cars with parking sensors & with distance radar (ACC). CDP-W12 08 Front grill "S8" model 2007 S8 Front grill "S8" model 2007 P-S8 Front grill "S8" model 2007 Suitable for cars with parking sensors & with distance radar (ACC). CDP-S8

4 Carbon parts Carbon mirror housings the serial mirror glas and electrics have to be inserted. Two pieces, one for the left & one for the right side. Made with a cover of real carbon and multiple layers of clear coat CB 1 set Exhaust system 4-tube stainless steel sports muffler with two tailpipes per side, tailpipe design oval, shifted & sloped with rolled edges, tailpipe diameter 115 x 85 mm. Duplex-system with two mufflers. Suitable for the following engine versions (2WD & 4WD / Quattro): 3.0, 3.2, 3.7, 4.2 (gasoline 162, 191, 206, 246 & 257 KW) 3.0 TDI, 4.0 TDI, 4.2 TDI ( Diesel 155, 171, 202, 240 KW) Espcially made for the Hofele-Design rear apron The muffler can also be combined with the serial rear bumper but it has to be cut out accordingly E 1 set

5 Interior design Individual covering of the A8 steering wheel a mixture of the finest materials: smooth leather, rough leather or ecsaine / microsuede, e.g. smooth leather on top and bottom and rough leather in the middle. Free colour choice. Preparation of the original A8 steering wheel which has to be send to Hofele-Design Germany for the covering. Production time between two and three weeks Carbon steering wheel a mixture of premium materials: carbon (top), leather and ecsaine / microsuede Carbon steering wheel a mixture of premium materials: carbon (top), leather and ecsaine / microsuede. In exchange with the serial steering wheel E Leather interior "Bi-Color" for the two front seats and the rear seat bench (or two single rear seats). Seat center parts with classic diamond stitching (Bentley look). Free colour choice. 1 set Leather covering of the door panels with classic diamond stitching (Bentley look). Free colour choice. Set for all four doors. 1 set

6 Wheels HOFELE "Rotiss-18" Designer wheel with five double spokes size: 8,0 x 18" offset 35, PCD/H: 5x112, CH 57,1 Incl. cone-head screws. Colour silver polished. TÜV-approved for the following tire sizes: 235/50, 245/45 & 255/45 RO80185 SP HOFELE "Rotiss-19" Designer wheel with five double spokes size: 8,0 x 19" offset 35, PCD/H: 5x112, CH 57,1 Incl. cone-head screws. Colour silver polished. TÜV-approved for the following tire sizes: 235/45, 245/40 & 245/45 RO80195 SP HOFELE "Reverso-II-20" designer wheel in 5-star-design size: 9,0 x 20" PCD/H: 5x112 offset 35 CH 57,1 Incl. cone-head screws. Colour Sterlingsilver-met. TUEV approved for the following tire sizes: 245/35, 255/35, 265/35 & 275/35 RVII90205 SP HOFELE "Reverso-II-20" BLACK or TITAN-GREY RS designer wheel in 5-star-design size: 9,0 x 20" PCD/H: 5x112 offset 35 CH 57,1 Incl. cone-head screws. Colour black or Titan-Grey RS TUEV approved for the following tire sizes: 245/35, 255/35, 265/35 & 275/35 RVII90205 BP HOFELE "Reverso-I-21" designer wheel with five double spokes size: 9,5 x 21" PCD/H: 5x112 offset 35 CH 57,1 Incl. wheel bolts. Colour Sterlingsilver-met. TUEV approved for the following tire sizes: 285/30 RVI95215 SP

7 HOFELE "Reverso-I-21" designer wheel with five double spokes size: 9,5 x 21" PCD/H: 5x112 offset 35 CH 57,1 Incl. wheel bolts. Free colour choice. TUEV approved for the following tire sizes: 285/30 RVI95215 BP HOFELE "Reverso-II-22" designer wheel in 5-star-design size: 10J x 22" PCD/H: 5x112 offset 50 CH 66,6 Colour Sterlingsilver-met. The wheel can only be used on the A8 D3 4E in combination with wheel spacers, see the "Chassis" listing below. Single-TUEV for the tire size 265/30 RVII SP HOFELE "Reverso-II-22" BLACK or TITAN-GREY RS designer wheel in 5-star-design size: 10J x 22" PCD/H: 5x112 offset 50 CH 66,6 Colour black or Titan-Grey RS The wheel can only be used on the A8 D3 4E in combination with wheel spacers, see the "Chassis" listing below. Single-TUEV for the tire size 265/30 RVII BP

8 Chassis Wheel spacers for Reverso II 22" wheels Set with four pieces, incl. 20 longer wheel bolts M14x1,5x47 In combination with the Reverso II-wheels in the size 10 x 22" you need the following spacers: front 15 mm / per side rear 15 mm / per side 8763 St 1 set ETS-system = electronical lowering system for the front & rear axle of the Audi A8 D3 4E facelift. Speed-related electronic chassis optimization only for cars with air suspension! Lowering of approx. 30mm at the front & 20mm at the rear axle, additionally each axle can be independently fine-adjusted another +/- 20mm so the maximum lowering is 50mm at the front & 40mm at the rear axle. - speed-related lowering (when driving more than 70 km/h the lowering is deactivated to get the full comfort & safety) - the serial settings in the menue can still be chosen but each setting is lowered - the module has a switch with which the module can be deactived in case you need the serial height. - the module has a long wire with which the switch can be guided and installed directly in the drivers compartment for easy control access - easy "Plug&Play" installation, takes approx. 30 minutes. The installation of the switch in the drivers compartment takes approx. 1,5 to 2 hours. - TUEV approved set

9 Engine Tuning there are two different types of engine tuning available: 1. Hofele-Design 'Dynamic Pro' - additional engine control unit 2. Hofele-Design 'Performance Package' - OBD software optimization electronical engine optimization by installing an optimized engine software onto the car via the OBD plug Motor Tuning "Hofele Dynamic Pro" More Power - More HP / kw - More Torque / Nm - Faster Acceleration - Higher end speed (if not regulated or at limits) Electronical increase of power by installation of an additional engine power control unit, to activate the engine reserves and for the optimization of the fuel consumption. With controlled driving a reduction of the gasoline / diesel consumption of up to 1 liter is possible. Plug-In-system, easy installation, the tuning kit can be shipped. If needed the tuning kit can be easily removed by driver - only plug-off. No TUEV approval. 2 years warranty on the "Dynamic Pro"- power control unit. An additional engine and gear box warranty / guarantee is available with extra charge. for A8 D3 4E 3,0 TDI 3,0l Diesel, 2967 ccm³, for A8 D3 4E 4,0 TDI 4,0l Diesel, 3936 ccm³, for A8 D3 4E 4,2 TDI 4,2l Diesel, 4134 ccm³, car type and engine version serial output 171 kw 232 HP 450 Nm 202 kw 275 HP 650 Nm 240 kw 326 HP 650 Nm 205 KW 279 HP 540 Nm 242 KW 330 HP 780 Nm 288 KW 392 HP 780 Nm increase of power output: HP / KW torque: NM

10 Motor tuning "Hofele Performance Package" - OBD engine optimization Electronical engine optimization by installing an optimized engine software onto the car via the OBD plug. No shipping possible - only for installation at our shop in Germany. An additional Engine and Gear box warranty / guarantee is available with extra charge. for Audi A8 D3 4E 2,8 FSI 2,8l gasoline, 2773 ccm³, for Audi A8 D3 4E 3,0 3,0l gasoline, 2976 ccm³, for Audi A8 D3 4E 3,0 TDI 3,0l Diesel, 2967 ccm³, for Audi A8 D3 4E 3,2 FSI 3,2l gasoline, 3123 ccm³, for Audi A8 D3 4E 3,7 3,7l gasoline, 3697 ccm³, for Audi A8 D3 4E 4,0 TDI 4,0l Diesel, 3936 ccm³, for Audi A8 D3 4E 4,2 4,2l gasoline, 4163 ccm³, for Audi A8 D3 4E 4,2 FSI 4,2l gasoline, 4163 ccm³, car type and engine version serial output 154 kw 210 HP 280 Nm 162 kw 220 HP 300 Nm 171 kw 233 HP 450 Nm 191 kw 260 HP 330 Nm 206 kw 280 HP 360 Nm 202 kw 275 HP 650 Nm 246 kw 335 HP 420 Nm 257 kw 350 HP 440 Nm 173 KW 235 HP 300 Nm 176 KW 240 HP 320 Nm 194 KW 265 HP 530 Nm 202 KW 275 HP 350 Nm 220 KW 300 HP 380 Nm 231 KW 315 HP 720 Nm 261 KW 355 HP 440 Nm 272 KW 370 HP 465 Nm increase of power output: HP / KW torque: NM

11 for Audi A8 D3 4E 4,2 TDI 4,2l Diesel, 4134 ccm³, for Audi S8 D3 4E 5,2 FSI 5,2l gasoline, 5204 ccm³, for Audi A8 D3 4E W12 6,0 6,0l gasoline, 5998 ccm³, 240 kw 326 HP 650 Nm 331 kw 450 HP 540 Nm 331 kw 450 HP 580 Nm 272 KW 370 HP 780 Nm 351 KW 478 HP 565 Nm 352 KW 480 HP 610 Nm For "Dynamic Pro" and "Performance Package": Attention: The here above declared increased motor power is "approx.-data". The real increase depends on the serial basic motor and its scattering of the final individual basic power of each motor. This scattering could be significant and as result of this, the power increase could be more or less than the above offered power data. Material: stainless steel wheels steel original parts from car manufacturer ABS plastic polyurethane foam flexible RIM plastic combination of plastic and fibreglas High Performance Composite Carbon Covered Parts abbreviation E ST ABS PU RIM PKG HPC CB "Audi" + "A8" are registered trademarks of the Audi AG Ingolstadt errors excepted "Copyright -C for all products, by HOFELE-DESIGN GmbH, Adress: Hermann-Schwarz-Str. 11, D Donzdorf, GERMANY [email protected] International Registered -R- Parts, Design and Trademark!"