22 LED Backlit LCD TV with DVD Player

Transcription

1 L22LDVB19 22 LED Backlit LCD TV with DVD Player INSTRUCTION MANUAL Congratulations on the purchase of your new LOGIK TV. Your new television has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual in order that you fully understand these features. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference.

2 Contents Preparation... 4 Unpacking the TV...4 Installing / Removing the Base Stand...5 Front / Top View and Controls...6 Side View and Jacks...7 Remote Control...8 Installing Batteries in the Remote Control Remote Control Operation Range Connections Making Video and Audio Connections...11 Connecting an A/V Device with Composite Cable...11 Connecting a High-Definition (HD) Device with YUV SCART Adapter Connecting an A/V Device with SCART Cable Connecting an A/V Device with HDMI Cable Using Earphones Connecting the Aerial Initial Setup Turning the TV On for the First Time Selecting the Input Source Channel Selection Volume Adjustment Using the Features Customising the TV Setting (Analogue TV, DTV or Radio Mode) Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit CI (Common Interface) (DTV Mode) Customising the PICTURE Setting Customising the SOUND Setting Audio Language for DTV Customising the TIME Setting Customising the SETUP Setting Video Size (Aspect Ratio) Customising the LOCK Setting Lock System Change Password Block Programme Parental Guidance Teletext (Analogue TV Mode) To Turn on Teletext Function Digital Teletext (DTV Mode) Teletext within Digital Service EPG (Electronic Programme Guide) (DTV Mode) Switch On/Off EPG Select a Programme... 28

3 Using the DVD Features Using the Built-in DVD Player Compatible Disc Types Supported Formats Region Code Basic DVD Playback Functions Pausing Playback (Still Mode) Stopping Playback Skip (Forward / Reverse) Fast Forward / Fast Reverse Slow-Motion Play (DVD) Audio Selection (DVD) Subtitle Selection (DVD) Angle Selection (DVD) Special Functions Display (DVD) Locating a Specific Title (DVD) Locating a Specific Chapter / Track Locating a Specific Time Repeat Playback Repeating a Specific Section (DVD / CD) To resume normal playback DVD Programmable Playback Programmable Memory Customising the DVD Function Settings Language Setup Video Setup TV Type System Setup Maintenance Hints and Tips Display Modes YPbPr Mode HDMI Mode Specification Safety Warnings... 42

4 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Unpacking the TV Remove all packaging from the TV. Retain the packaging. If you dispose it please do so according to local regulations. The following items are included: GB-4 TV TV Base Remote Control / AAA Batteries x 2 (P.N.: 043-A55656W170) Instruction Manual (P.N.: W011) YUV SCART adapter (P.N.: 138-RGB040W001) Quick Start Guide (P.N.: W011) If items are missing, or damaged please contact Partmaster (UK only). Tel: for assistance.

5 Installing / Removing the Base Stand The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack. Preparation 1. Disconnect all cables connected to the TV Lay the TV down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. To install the base stand, make sure the base stand is correctly orientated as shown in the label at the bottom of the base stand. Front of the TV Bottom of base stand FRONT Arrow pointing towards the front of the TV. FRONT Connections 4. Use your thumb to carefully push down on the latch and insert the base stand into the bottom of the TV until it locks in place. Remove the base stand before mounting the TV onto the wall. Bottom of base stand FRONT Latch Initial Setup 5. To remove the base stand, use your thumb to carefully push down on the latch and pull the base stand out. 6. Mounting on the wall. This TV is designed to be wallmounted with a standard 75 mm x 75 mm mounting kit designed for flat-panel TVs (sold separately). Mount this TV according to the instructions included in the mounting kit. 75 mm 75 mm Four mounting holes (size M4 screw) Using the Features Using the DVD Features GB-5 Hints and Tips, Specification

6 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Front / Top View and Controls Item GB-6 Description 1 POWER LED Illuminates when the TV is in standby and goes off when the TV is turned on. IR (Infrared Receiver) 2 VOL + / Adjust the volume. 3 CH / 4 FUNCTION Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected. Select a channel. Select sub-menu of OSD menu. Press to skip to the beginning of the previous / next chapter or track. (DVD mode) Select among the different input signal sources: DTV, TV, AV1, AV2/SCART, YUV/SCART, DVD or HDMI 5 MENU Displays the OSD (on screen display) menu. 6 Press to start playback. (DVD mode) 7 / I 1 Switch the TV on from standby. Switch the TV back to standby CI (Common Interface) Slot Allows the insertion of a Common Access Module. (Refer to page 19 for details)

7 Side View and Jacks Preparation 1 TV AERIAL Connections Initial Setup Item Description 1 TV AERIAL Connect to the aerial socket on the wall with the RF coaxial cable. 2 HDMI IN HDMI (High-Definition Multimedia Interface) provides an uncompressed, all digital audio/ video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray player, and A/V receiver. 3 SCART Input Connect to VCR, DVD Player, or other AV devices with SCART output jacks. 4 Connect earphones for private listening. Using the Features 5 MAINS CABLE Connecting to the mains socket. 6 VIDEO / AUDIO (L/R) Connect to the Composite VIDEO and AUDIO (L/R) output jacks on external video devices. 7 Disc Tray Place the disc in with the label side facing towards you. 8 Press this button to open the disc door. To close the disc door simply push the disc door back. Using the DVD Features GB-7 Hints and Tips, Specification

8 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Remote Control 1 STANDBY/ON Switch the TV between on and standby mode. 2 FUNCTION Select among the different input sources: DTV, TV, AV1, AV2/SCART, YUV/SCART, DVD or HDMI. 3 TV/DTV A short-cut to switch the input source between TV and DTV. 4 DVD A short-cut to switch the input source to DVD directly. 5 RADIO A short-cut to switch to digital radio channels directly. 6 AV A short-cut to switch the input source among AV1, AV2/ SCART, YUV/SCART or HDMI Number Button Select a programme. Select numbered items in a menu. 8 REVEAL Reveal hidden information such as the answer to a quiz in Teletext. (TV mode) 9 LAST CH Return to previously viewed channel. 10 Mute and restore your TV sound. 11 VOL. +/- Adjust the volume. 12 TV MENU Display the OSD (on screen display) menu. 13 CH/PAGE / Select a channel. Press to go forward or backward the page of Teletext screen. (TV mode) Press to go forward or backward the page of Programme Edit & Favourite. (TV / DTV mode) 14 GB-8 Allows you to navigate the OSD menus and adjust the system settings to your preference. ENTER / OK Confirm the selection in the OSD menus

9 15 / Press to skip to the beginning of the previous / next chapter or track. (DVD mode) / Use to advance or reverse playback rapidly. (DVD mode) HOLD Freeze a multi-page passage on screen in Teletext. (TV mode) MIX Select Teletext with a TV programme. EXIT Press to exit the menu and return directly to normal viewing FAV Display the Favourite Channel List. 16 Press to stop playback. (DVD mode) LIST Display a list of channels saved in the TV tuner memory. 17 Press to start playback. (DVD mode) GUIDE Display the EPG (Electronic Programme Guide). (DTV mode) 18 Press to pause playback. (DVD mode) INFO Display channel information. (DTV mode) 19 ANGLE Select different angles for the video. (DVD mode) SIZE Press to set the letters size of teletext on the screen. (TV mode) 20 SUBTITLE Select subtitle languages programmed on a DVD/DTV broadcasting programmes. (DVD / DTV mode) 21 SLOW Press to play a DVD in slow-motion. (DVD mode) INDEX Press to select the page number of the index from Teletext. (TV mode) 22 AUDIO Change the audio language or audio channel. (DVD mode) CANCEL To cancel the teletext mode completely. (TV mode) 23 TITLE Press to select the title menu screen. (DVD mode) 24 GOTO Press to skip to a specific location on a DVD / CD. (DVD mode) 25 DVD MENU Displays the OSD (on screen display) menu. (DVD mode) 26 SETUP Press to display the setup menu screen. (DVD mode) 27 Switch between different audio languages: Mono / Stereo or Dual I/Dual II (only applicable when the TV programme has this feature). 28 TEXT Turn on and off the Teletext function. (TV / DTV mode) 29 SOUND Selects sound mode: Standard, Music, Theatre, Voice, Personal. 30 DISPLAY Display the present screen information such as the current channel and the input source. 31 TIME A short cut to enter and exit the TIME menu. 32 SLEEP Set the TV sleep timer. 33 PICTURE Selects picture mode: Standard, Movie, Dynamic, Soft, Personal. 34 LCD MODE Allows you to watch the screen in various formats: Full, 16:9, 4:3, Auto, Expand, Zoom, LCD Off. 35 Coloured buttons Access the TELETEXT items or programme edit when using Digital / Freeview TV Channels. (TV / DTV mode) MEMORY (red) Perform title / chapter programmed playback. (DVD mode) CLEAR (green) Press to clear input selections and cancel certain playback functions. (DVD mode) REPEAT A - B (yellow) Repeat a segment between A and B. (DVD mode) REPEAT DISC (blue) Repeat a title, chapter, track or whole disc. (DVD mode) GB-9 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification

10 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Installing Batteries in the Remote Control 1. Remote Control Operation Range Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60 in front of the TV. The operating distance may vary depending on the brightness of the room. GB-10 Press and lift the back cover up to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. Handling the Batteries Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property. Use only the types of the batteries which are indicated in this manual. When the batteries are exhausted, the remote will not function. Replace both batteries at the same time with new ones. Do not install new batteries with used ones and do not mix different types of batteries. Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations. Handling the Remote Control Take care of your fingernails when you press and hold the battery release tab. Do not drop or cause impact to the remote control. Do not spill water or any liquid on the remote control. Do not place the remote control on a wet object. Do not place the remote control under direct sunlight or near sources of excessive heat. Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire M

11 Making Video and Audio Connections Refer to the owner s manual of any external A/V device for connection procedures. When connecting any external A/V device, do not connect the mains cable to the mains socket until all other connections are completed. Preparation Best Video Performance Connector Type Separate audio connection required HDMI (High-Definition Multimedia Interface) (480i / 480p / 576i / 576p / 720p / 1080i / 1080p) No Connections YUV SCART Adaptor Component Video (480i / 480p / 576i / 576p / 720p / 1080i / 1080p) Yes Composite Video Initial Setup Connecting an A/V Device with Composite Cable 1. Use the audio and video cables to connect the external A/V device s composite video/audio jacks to the TV s AUDIO IN / VIDEO IN jacks. (Video = yellow, Audio Left = white, and Audio Right = red) 2. Plug the connected devices into the mains socket before plugging your TV into the mains socket. 3. Press the / I button on the top panel of the TV or the button on the remote control to turn on your TV. 4. Press the FUNCTION button on the top panel of the TV or on the remote control to display the Source List. Use the buttons on the remote control to select AV1 mode, and then press the ENTER/OK button. Or you may just press the AV button on the remote control to select AV1 mode directly. Video R L AV Cable (not included) Side View of TV DVD Player / Recorder TV AERIAL Using the Features Using the DVD Features Not all A/V devices have the ability to connect to a TV. Please check your A/V devices user guides for compatibility. Video Camera VCR Game Console Set-top Box Satellite Receiver GB-11 Hints and Tips, Specification

12 L Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Connecting a High-Definition (HD) Device with YUV SCART Adapter GB-12 Not all A/V devices have the ability to connect to a TV. Please check your A/V devices user guides for compatibility. 1. Use a component cable to connect the external A/V device s component output jacks to the TV s SCART IN jack using the supplied YUV SCART adapter. Use an audio cable to connect the external A/V device s component audio jacks to the TV s AUDIO IN jacks. 2. To achieve better picture quality, connect a DVD player to the component input ports as shown below. Component port on the TV Y Pb Pr Video output ports on DVD player Y Pb Pr Y Cb Cr Plug the connected devices into the mains socket before plugging your TV into the mains socket. 3. Press the / I button on the top panel of the TV or the button on the remote control to turn on your TV. 4. Press the FUNCTION button on the top panel of the TV or on the remote control to display the Source List. Use the buttons to select YUV/SCART mode, and then press the ENTER/OK button. Or you may just press the AV button on the remote control to select YUV/ SCART mode directly. Connecting an A/V Device with SCART Cable Use a SCART cable to connect the external A/V device s SCART socket to the TV s SCART IN jack. Plug the connected devices into the mains socket before plugging your TV into the mains socket. 3. Press the / I button on the top panel of the TV or the button on the remote control to turn on your TV. 4. Press the FUNCTION button on the top panel of the TV or the FUNCTION or AV button on the remote control to display the Source List. Use the buttons to select AV2/SCART mode, and then press the ENTER/OK button. Or you may just press the AV button on the remote control to select AV2/SCART mode directly. R L Audio Cable (not included) L Video Camera R R VCR Y Side View of TV Y Y Pb/Cb Pb Pb/Cb Side View of TV DVD Player / Recorder Pr/Cr Component Cable (not included) Pr/Cr Pr Game Console Blu-ray Player / DVD Player / Recorder SCART Cable (not included) YUV SCART adapter (included) COMPONENT OUT Set-top Box Satellite Receiver Set-top Box Satellite Receiver TV AERIAL TV AERIAL

13 Connecting an A/V Device with HDMI Cable This TV can accept High-Definition Multimedia Interface (HDMI). This TV SET supports HDCP (High-Bandwidth Digital Content Protection) Protocol. When you connect to the output of an HD ready player (Blu-ray Disc Player, Game Console, Set Top Box or PC) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source. To get the best picture quality, adjust the Blu-ray Disc Player, Game Console or Set Top Box output resolution up to 1920 x 1080p. Side View of TV 1. Use a HDMI cable to connect the A/V device s HDMI output jack to the TV s HDMI IN jack. 2. Plug the connected devices into the mains socket before plugging your TV into the mains socket. TV AERIAL Preparation Connections 3. Press the / I button on the top panel of the TV or the button on the remote control to turn on your TV. HDMI Cable (not included) 4. Press the FUNCTION button on the top panel of the TV or on the remote control to display the Source List. Use the buttons to select HDMI mode, and then press the ENTER/OK button. Or you may just press the AV button on the remote control to select HDMI mode directly. The HDMI connector provides both video and audio signals, it s not necessary to connect the audio cable. Game Console Set-top Box Blu-ray Player / DVD Player / Recorder Initial Setup Using Earphones Turn down the volume before connecting earphones to the Earphones jack (AUDIO LINE OUT), then adjust the volume to your desired level. When earphones are connected, no sound will come from the speakers. Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. Connecting the Aerial Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the TV AERIAL socket on the side of your TV. Side View of TV Earphones (1/8 [3.5mm] diameter plug) (not included) TV AERIAL Using the Features Using the DVD Features Do not connect the TV to the mains supply until you have completed all the connections. TV AERIAL OR RF coaxial cable (not included) GB-13 Hints and Tips, Specification

14 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Turning the TV On for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. The TV enters standby mode and the power LED on the front panel of the TV will illuminate. 2. In standby mode, press the / I button on the top panel of the TV or the button on the remote control to turn the TV on. The power LED will go off. 6. A pop-up screen will be displayed, press the buttons to select the Country where you will operate the TV. 7. Press the button to select Start on the screen and then press the ENTER/OK button on the remote control to start the Auto Tuning. Select Cancel on the screen or press the EXIT button to cancel the New Installation. An installation reminder will appear the next time you turn on the TV. GB-14 Always disconnect the TV from the mains socket when not in use for a long period of time. The / I button on the top panel of the TV or the button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket. 3. The first time you turn the TV on, it will go straight into the New Installation menu. 4. Press the buttons to select your desired language to be displayed on the menu. Press the 5. button and then press the ENTER/OK button or the button to select Auto Tuning. To mains socket

15 Selecting the Input Source 1. Press the FUNCTION button to display the input source list. 2. Press the buttons to select the input source that you want: DTV, TV, AV1, AV2/SCART, YUV/SCART, DVD or HDMI. 3. Press the ENTER/OK button to confirm your selection. Alternative Press the TV/DTV button to switch the input source between TV and DTV. Press the DVD button to switch the input source to DVD directly. Press the AV button to switch the input source among AV1, AV2/SCART, YUV/SCART or HDMI. Press the RADIO button to switch to digital radio channels directly. DTV TV AV1 AV2/SCART YUV/SCART DVD HDMI Preparation Connections Channel Selection Press the CH / CH buttons on the top panel of the TV or the CH/PAGE / buttons repeatedly or 0-9 buttons on the remote control to select the channel. Alternative Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the ENTER/OK button to confirm the setting. Press the LAST CH button on the remote control to return to the previously viewed channel. Initial Setup Press the FAV button to view the Favourite List. Then use the buttons to highlight and select the channel. Press the ENTER/OK button to confirm the setting. Press the LAST CH button to return to the previously viewed channel. Volume Adjustment Press the VOL + or buttons on the top panel of the TV or on the remote control to adjust the volume. If you wish to switch the sound off, press the button. You can cancel this function by pressing the or VOL + buttons. Using the Features Using the DVD Features GB-15 Hints and Tips, Specification

16 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Customising the TV Setting (Analogue TV, DTV or Radio Mode) Auto Tuning Use this to automatically find and store all available channels. 1. Press the TV MENU button and then use the buttons to select the TV SETTING menu. 2. Press the buttons and then the ENTER/OK button or the button to select Auto Tuning. 3. Press the buttons to select the Country where you will operate the TV. 4. Press the button to select Start on the screen then the ENTER/OK button on the remote control to start the Auto Tuning. 5. Press the TV MENU button to return back to the previous menu. 6. Press the EXIT button to exit the menu. DTV Manual Tuning Allows you to make manual fine tuning adjustments if the channel reception is poor under DTV mode. 1. Press the TV MENU button and then use the buttons to select the TV SETTING menu. 2. Press the buttons and then the ENTER/OK button or the button to select DTV Manual Tuning. GB-16 Please select country first, Then select Start to update info. Country selection Start Channel Tuning 5 % MHz TV TV DTV Radio : : : 0 Programme(s) 0 Programme(s) 0 Programme(s) Press <TV Menu> to skip. Press <Exit> to exit. EXIT TV MENU UK Cancel

17 3. The DTV Manual Tuning screen will pop up. Press the buttons to select the UHF channel. Press the ENTER/OK button to commence the search of that channel. 4. Press the TV MENU button to return back to the previous menu. DTV Manual Tuning UHF CH 68 Please select channel then Press OK to search Preparation 5. Press the EXIT button to exit the menu. Bad Good EXIT TV MENU ATV Manual Tuning Allows you to make manual fine tuning adjustments if the channel reception is poor under analogue TV mode. 1. Press the TV MENU button and then use the buttons to select the TV SETTING menu. Connections 2. Press the buttons and then the ENTER/OK button or the button to select ATV Manual Tuning. Initial Setup 3. The ATV Manual Tuning screen will pop up. Use the buttons to select the following options and the buttons to adjust the setting. Storage To Preset the channel number. System Select the sound system: I / BG/ DK. Current CH Display current channel number. Search Press the buttons to start the manual tuning. Fine-Tune Press the buttons to make manual fine tuning adjustments. EXIT ATV Manual Tuning Storage To 1 System Current CH 1 Search Fine-Tune Frequency TV MENU SAVE MHz Using the Features 4. After finishing all the manual tuning adjustments, press the RED button to save your settings. 5. Press the TV MENU button to return back to the previous menu. 6. Press the EXIT button to exit the menu. Using the DVD Features GB-17 Hints and Tips, Specification

18 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Programme Edit Allows you to edit TV programmes in the Channel List. 1. Press the TV MENU button and then use the buttons to select the TV SETTING menu. 2. Press the buttons and then the ENTER/OK button or the button to select Programme Edit. 3. A Programme Edit screen will pop up. Press the CH/PAGE buttons to skip to previous next page. 4. Press the RED / GREEN / YELLOW / BLUE button or the FAV button to edit the channel. a. DELETE Press the RED button on the remote control to delete the selected channel, press the ENTER/OK button to confirm. Press the TV MENU button to stop delete. b. RENAME (ATV mode) Press the GREEN button to rename the selected channel. Use the buttons to select the characters to represent the station name, use the buttons to move to the next character, then press the TV MENU button to confirm the new name. c. MOVE (ATV mode) Press the YELLOW button and use the buttons to move to the selected channel, then press the TV MENU button to confirm. GB-18 d. SKIP Press the BLUE button to skip or not skip the selected channel. Press the BLUE button again to undo it. e. FAV (Favourite) Press the FAV button to set or cancel the selected channel as one of the favourite programmes. 5. Press the TV MENU button to return back to the previous menu. 6. Press the EXIT button to exit the menu. DTV DTV DTV DTV DTV DTV TV Programme Edit 1 BBC ONE 2 BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS BBCi 1 BBC1 DELETE RENAME MOVE SKIP FAV

19 CI (Common Interface) (DTV Mode) The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV and others. The Common Access Module and viewing card can be obtained from the service provider. Preparation Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction. This feature is not available in all countries. To insert the Common Access Module 1. Before you insert the Common Access Module, ensure that the TV is switched off and the viewing card is inserted in accordance with the Service Provider s instructions. Top View of TV Connections 2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance. 3. Switch the TV on. To remove the Common Access Module 1. Before you remove the Common Access Module, ensure that the TV is switched off. 2. Pull the Common Access Module from the slot. CI (Common Interface) slot Allows the Common Access Module to be inserted with its label facing back and access the content that has been encrypted. Initial Setup 3. Switch the TV on. To view the module information 1. Press the TV MENU button and then use the buttons to select the TV SETTING menu. 2. Press the buttons and then the ENTER/OK button or the button to select CI Information. Using the Features 3. A CI Information Main menu will pop up. Press the buttons to display the Module Information, Smart Card Information, Language, Software Download. 4. Press the TV MENU button to return back to the previous menu. 5. Press the EXIT button to exit the menu. Main menu Module information Smart card information Language Software Download Press OK to select, or Exit to quit. EXIT OK Using the DVD Features GB-19 Hints and Tips, Specification

20 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Customising the PICTURE Setting Allows you to set your preferred picture mode. 1. Press the TV MENU button and then use the buttons to select the PICTURE menu. 2. Use the buttons to select the following options and the buttons to adjust the setting. GB-20 Picture Mode Contrast Brightness Sharpness Colour Tint (For NTSC format) Cycles among picture mode: Standard / Movie / Dynamic / Soft / Personal. Alternative You may press the PICTURE button to select the picture mode directly. Adjusts the difference between light and dark levels in the picture. (for Personal mode) Increase or decrease the amount of white in the picture. (for Personal mode) Adjusts the level of crispness in the edges between light and dark areas of the picture. Controls the colour intensity. (for Personal mode) Adjusts the balance between red and green levels. (Tint is only available for NTSC signal reception.) Colour Temp Adjusts the colour components independently to achieve a warm or cool effect: Normal / Warm / Cold. Normal: Increase natural tint Warm: Increases red tint Cold: Increases blue tint 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu.

21 Customising the SOUND Setting Allows you to select an audio-enhancement technique. Preparation 1. Press the TV MENU button and then use the buttons to select the SOUND menu. Connections 2. Use the buttons to select the following options and the buttons to adjust the setting. Sound Mode Allows selection of an audio-enhancement technique from among the following options: Standard / Music / Theatre / Voice / Personal. Alternative You may press the SOUND button to select the sound mode directly. Initial Setup Treble Bass Balance Controls the relative intensity of higher pitched sounds. Controls the relative intensity of lower-pitched sounds. Adjusts the relative volume of the speakers in a multiple speaker system. 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. Audio Language for DTV While watching a DTV programme, you can press the button to display the Audio Language menu, and select audio language, audio format and sound track. audio format audio language sound track Using the Features Use the buttons to select an audio language or audio format if available, press the buttons to select sound track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the ENTER/OK button to confirm. Press the EXIT button to exit the Audio Language menu. For analogue TV, press the or Dual I / Dual II directly. button to select Mono / Stereo Using the DVD Features GB-21 Hints and Tips, Specification

22 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Customising the TIME Setting 1. Press the TV MENU button and then use the buttons to select the TIME menu. 2. Use the buttons to select the following options and the buttons to adjust the setting. GB-22 Clock Sleep Timer Time Zone The clock is set automatically when receiving a digital signal. You must set the time correctly before using Sleep Timer function. Alternative You may press the TIME button to select the display type directly. The sleep timer automatically switches the TV to standby after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function. Press the buttons to select a period of time after which the TV automatically switches to standby mode: Off / 5... /90 / 120 min. The timer begins to count down from the number of minutes selected. \ If you turn the TV off after setting the sleep timer, the sleep timer setting will be erased. Alternative 1. You may press the SLEEP button repeatedly to select the number of minutes: Off / 5... / 90 / 120 min directly. 2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu.

23 Customising the SETUP Setting 1. Press the TV MENU button and then use the buttons to select the SETUP menu. Preparation 2. Use the buttons to select the following options and the buttons to adjust the setting. Language Audio Language Subtitle Language Allows you to select your desired on screen menu language. Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.) Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.) Connections Restore Setting Restores all settings to factory defaults. 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. Video Size (Aspect Ratio) Allows you to watch the screen in various picture formats: Full / 16:9 / 4:3 / Auto / Expand / Zoom / LCD Off. Initial Setup Press the LCD mode button repeatedly to select the desired format. Full Screen 16:9 4:3 The following selection will allow you to view the picture in full screen. The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen. The following selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. Using the Features Auto When your TV receives a 4:3 or 16:9 signal it will automatically change to the picture format broadcast. 4:3 Expand The following selection will allow you to view the picture without any alternation, while filling the entire screen with subtitles shown on the bottom of the screen. Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. Using the DVD Features 16:9 SUBTITLE GB-23 Hints and Tips, Specification

24 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Customising the LOCK Setting Lock System Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable programmes. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access the Auto Tuning / Manual Tuning / Program Edit / New Installation/Block Programme/Parental Guidance. 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the buttons to select Lock System and then the buttons to select ON. 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. Change Password 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the buttons to select Change Password, then press the ENTER/OK button or the button. Enter password to proceed. GB-24 The default password is If you change the password, be sure to remember the new password! If you forget the new password, press the master password 8888 on the remote control. 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. New Please enter password Confirm On Off

25 Block Programme Block Programme is designed to prevent children watching unsuitable programmes. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered. Preparation 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the buttons to select Block Programme, then press the ENTER/OK button or the button. Off Connections 3. A Block programme screen will pop up. Press the buttons to select a channel. Press the GREEN button on the remote control to block or unblock the programme. Press the GREEN button again to unblock. 4. Press the TV MENU button to return to the previous menu. 5. Press the EXIT button to exit the menu. DTV DTV DTV DTV DTV DTV TV Block programme 1 BBC ONE 2 BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS BBCi 1 BBC1 Initial Setup EXIT LOCK TV MENU OK Parental Guidance This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This allows you to set up blocking schemes to block specific channels and ratings. This TV is programmed to remember which option it was last set to even if you switch the TV off. When a programme is locked or rated with delayed state, the message locked programme is displayed without displaying the password window. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered. Using the Features 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the buttons to select Parental Guidance, then press the buttons to select different rating: Off, 4,..., Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. Off Off Using the DVD Features GB-25 Hints and Tips, Specification

26 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Teletext (Analogue TV Mode) Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index. To Turn on Teletext Function GB-26 Make sure the TV channel you are watching transmits teletext. No Teletext sign will show on the screen if teletext is not available. In ATV mode, press the TEXT button to enter Teletext mode. Press the INDEX button to display the index page. Press the TEXT button twice to exit and the TV will return to the channel you were watching. To select a page of text Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the CH/PAGE button. To move to the previous page, press the CH/PAGE button. To return to the index page, enter the 100 by using the 0-9 buttons or press the INDEX button. Mix To view a page of text whilst watching a TV programme press the MIX button. The text will be superimposed over the TV programme. Press the MIX button again to return to the text page. Page search while watching TV Press the CANCEL button while watching TV with teletext, enter the page number you want by using the 0-9 buttons. The top line of the text page will appear while the text searches for your page. When the page is found the number will remain in the top left hand corner of the screen. Double height text If you have difficulty reading the text on the TV you can double the height of the text. Press the SIZE button. The top half of the page will be displayed in double height text. Press the SIZE button again. The bottom half of the page will be displayed in double height text. Press the SIZE button again to return to the full page. Page STOP If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page. To stop the move to the next sub page, press the HOLD button. will appear on the top left corner of the screen. To continue moving through the sub pages, press the HOLD button again. To Reveal Information Press the REVEAL button to reveal concealed information (quiz answers etc.). Press the REVEAL button again to conceal the information again. Fasttext At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.

27 Digital Teletext (DTV Mode) Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. The subtitle will temporarily auto off when digital teletext function is turned on. Preparation Teletext within Digital Service 1. In DTV mode, press the LIST button to display the Channel List. Press the buttons to select the teletext channel. 2. Press the TEXT button to display the teletext page. 3. Press the 0-9 buttons to select a page number. Connections 4. Follow the instructions on digital teletext and move onto the next step by pressing ENTER/OK,, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc. 5. To change digital teletext service, select a different service by pressing the 0-9 buttons. EPG (Electronic Programme Guide) (DTV Mode) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for the next 7 days. Switch On/Off EPG 1. Press the GUIDE button to switch on EPG. Press the 2. GUIDE or EXIT button again to switch off EPG and return to normal TV viewing. Initial Setup Using the Features current date and time channel no. channel name BBC ONE BBC TWO five BBC THREE QVC UK Gold Breakfast No Info.. Arth.. Arthur No In.. Old.. Mio.. Casual & Co BBC ONE Breakfast Animal 24:7 No Information No Information This is BBC THREE QVC Outlet Closedown Homes Under the.. Best of Friend s No Information current channel number and name current programme and time programme date programme time programme information Using the DVD Features GB-27 Hints and Tips, Specification

28 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Select a Programme 1. Press the buttons to select the desired channel and the buttons to select the desired programme, and then press the ENTER/OK button to confirm. Button Functions in a 7 Days Guide Remote Control Button YELLOW INFO or or ENTER/OK GUIDE / EXIT GB-28 Function Press the buttons to view schedule of the previous / next day, then press the YELLOW button again to confirm. To display detailed informations of the selected programme if available. To select a channel. To select a programme. To confirm and view the selected channel. Switch off EPG.

29 Using the Built-in DVD Player 1. Press the FUNCTION button and select DVD mode or press the DVD button directly, the LOGIK logo will appear on the screen. Preparation 2. Press the button on the side panel of the TV. Hold the disc by its sides and carefully place onto the spindle with the label side facing towards. Gently push the dish down until you hear a click. Close the disc tray gently. Allow 10 seconds for the player to load the disc. 3. After loading, the TV will automatically either bring you to the main menu of the DVD, or start playing the DVD. If the TV does not automatically start playing the DVD, press the button on the remote control. 4. Press the button on the side panel of the TV if you want to remove the disc. Compatible Disc Types Connections Disc Types Disc Logo Recorded Content DVD-VIDEO (Digital Versatile Disc) AUDIO + VIDEO DVD±RW (Audio/Video format or JPEG files) DVD±R (DVD Recordable - Audio/Video format or JPEG files) CD-R (CD Recordable - Audio/Video format or JPEG files) DVD+ReWritable DVD+R AUDIO + VIDEO + JPEG AUDIO + VIDEO + JPEG AUDIO + VIDEO + JPEG Initial Setup CD-RW (CD-Rewritable - Audio/Video format or JPEG files) AUDIO + VIDEO + JPEG AUDIO-CD (Compact Disc Digital Audio) AUDIO Supported Formats JPEG The file extensions has to be.jpg and not.jpeg Pictures encoding must comply with ISO format. Using the Features Some recorded files may not be able to be played due to the type and format of disc or condition of the recording. Region Code Both the DVD player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this DVD player is described on the rear panel of the DVD player. Disc Type Region code DVD-VIDEO Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the TV. Refer to the discs instruction notes. may appear on the screen during operation. A means that the desired operation is not permitted by the TV or disc. Using the DVD Features This TV can play JPG picture files recorded on CD-R and CD-RW discs. After loading the picture file disc, the TV will automatically start the photo slideshow. Press the button to go to the folder list. Press the buttons to highlight a file to play. Press the button to start playback. You can press the button to interrupt playback, and press the button to resume playback. Press the ANGLE button on the remote control to rotate the picture orientation by 90. GB-29 Hints and Tips, Specification

30 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Basic DVD Playback Functions Pausing Playback (Still Mode) Press the button. To resume normal playback, press the button. Each time you press the button, the picture advances one frame on the DVD movie. Stopping Playback Press the button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the button. If you press the button twice, the TV s memory will be cleared and pressing the button will reset the disc to the beginning. Skip (Forward / Reverse) Press the button to go back to previous titles/chapters/tracks. Press the button to advance titles/chapters/tracks. For audio CD discs, use the number buttons (remote control only) to jump straight to that track number. Fast Forward / Fast Reverse 1. Press the buttons when a disc is playing. GB-30 The disc begins a fast scan at two times normal (x2) speed. Each time the buttons is pressed, the speed of the fast scan changes. x 2 x 4 x 8 x 16 x 32 x 2 x 4 x 8 x 16 x Press the button when you have reached the desired point to resume playback at normal speed. Slow-Motion Play (DVD) 1. In Play mode, press the SLOW button on remote control. Each time the SLOW button is pressed, the speed of slow-motion playback changes in the following sequence: 2. Press the button to return to the normal playback speed. Audio Selection (DVD) x 1/2 x 1/4 x 1/8 x 1/16 x 1/32 In some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback. 1. While a disc is playing, press the AUDIO button to show the current audio format number. 2. Press the AUDIO button repeatedly to select the desired audio format. If only one audio format is recorded, the number does not change. It takes about 2 seconds for playback to continue in the new audio format.

31 Subtitle Selection (DVD) 1. While a DVD is playing, press the SUBTITLE button to display the current language setting. Preparation 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. If only one language is recorded, the language does not change. It takes about 2 seconds for playback to continue with the new subtitle. The number of languages recorded differs depending on the disc. If no button is pressed within a few seconds, playback continues without changing the current subtitle. This function can only be used for discs on which subtitles have been recorded in multiple languages. On some DVDs, subtitles are activated from the main menu of the DVD. Press the DVD MENU button to activate the main menu. Connections Angle Selection (DVD) Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE/SIZE button to view the number of the current angle available. 2. Press the ANGLE/SIZE button repeatedly to change the scene to the next angle in those recorded. It takes about 2 seconds for playback to continue with the new angle. If no button is pressed within 10 seconds, playback continues without changing the current angle. This function can only be used for discs on which scenes shot from multiple angles have been recorded. If only one angle is recorded, is displayed. 1/3 1/3 Sequence of angle shots (Example) 2/3 3/3 Initial Setup Using the Features Using the DVD Features GB-31 Hints and Tips, Specification

32 Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification Special Functions Display (DVD) While the disc is playing, press the DISPLAY button repeatedly to display information on operation status. Locating a Specific Title (DVD) If a DVD contains title numbers, you can locate a specific title by directly selecting a title number. 1. In stop mode, press the GOTO button. 2. Press the buttons to highlight a specific field and press the corresponding number button(s) for the title you want. 3. Press the ENTER/OK button to confirm. Playback starts from the selected title. Locating a Specific Chapter / Track If you know the chapter / track number you want to play, you can locate a specific chapter / track by directly selecting a chapter / track number. 1. Press the GOTO button to search for your desired chapter / track. 2. Press the buttons to highlight a chapter / track then press the 0-9 button(s) for the chapter / track you want. 3. Press the ENTER/OK button to confirm. Playback starts from the selected chapter / track. Locating a Specific Time You can move to a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the GOTO button. 2. Press the GOTO button again, the below screen will be displayed. Enter the corresponding number buttons for the setting point you want. 3. Press the ENTER/OK button to confirm. Playback starts from the selected location. GB-32 Some discs may not respond to this process. Some scenes may not be located as precisely as you specified. This method for accessing specific locations is available only within the current title of the DVD disc.