SikaBond Adhesive Systems for Floor Coverings. Innovation & Consistency. since 1910

Transcription

1 SikaBond Adhesive Systems for Floor Coverings Innovation & Consistency since 1910

2

3 Sika s Comprehensive Competence in Flooring Sika has an extensive range of products for use in many different types of flooring systems including concrete and resin floor buildups, plus adhesives for all types of floor coverings. Whether you are looking for the best adhesive solution for vinyl, carpets, linoleum or cork underlayment, adhesives and grouts for tiles or natural stone, elastic adhesives for wood floors; if you want a resin flooring system for an industrial area, or a resilient comfort floor for reduced footfall noise Sika is able to provide a suitable solution. With additional ancillary products such as self-levelling underlayments, substrate sealing primers, moisture barriers and unique application equipment, Sika can technically and practically fulfil almost any special flooring requirements on-site. Sustainable and innovative Sika solutions can also help to improve working conditions, accelerate construction programmes and therefore also significantly reduce costs. The latest additions to the Sika flooring range are SikaBond adhesives for different types of floor covering materials. On the following pages of this brochure this Sika product line will be introduced and explained in more detail. 2 I 3

4 Sika s Adhesive Range for Floor Coverings SikaBond Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive for linoleum coverings Uses Linoleum in rolls Cork underlayments Suitable for absorbent subfloors Advantages Secure and problem-free adhesion (even linoleum with high internal stresses) Easy to apply and long open time Solvent-free and low emissions (EC-1) Compatible with underfloor heating Suitable for furniture with castors SikaBond Vinyl-1 One-part, solvent-free and one-side pressure sensitive dispersion adhesive for vinyl coverings Uses PVC floor coverings in sheets and tiles PVC design floor coverings Heterogeneous PVC floor coverings, also with fleece backing CV (cushioned vinyl) floor coverings, also with fleece backing Carpets with synthetic backing Carpets with fleece backing Suitable for absorbent and non-absorbent subfloors Advantages Wide range of applications High initial grip, high adhesive bond Very good resistance to softening agents Very easy to apply and very long open time Solvent-free and very low emissions (EC-1 Plus) Compatible with underfloor heating Suitable for furniture with castors SikaBond Carpet-1 One-part, solvent-free dispersion adhesive for fitted carpeting Uses Carpets with synthetic backing CV light-weight floor coverings with fleece backing Light weight needle felts Filler-free, vapour-permeable textile floor coverings Suitable for absorbent subfloors Advantages Good cost-performance ratio Very strong initial adhesive grab Easy to apply and high adhesion Solvent-free and low emissions (EC-1) Compatible with underfloor heating Suitable for furniture with castors

5 SikaBond Carpet Uni One-part, solvent-free, very strong initial grab dispersion adhesive for fitted carpeting Uses Carpets with synthetic backing Carpets with fleece backing CV (cushioned vinyl) floor coverings with fleece backing Needle felts Natural fibre floor coverings with latex backing Suitable for absorbent subfloors Advantages Wide range of applications Very strong initial adhesive grab Very high bond strength Extremely long open time Easy to apply Solvent-free and low emissions (EC-1) Compatible with underfloor heating Suitable for furniture with castors SikaBond Floor Uni One-part, solvent-free, strong initial grab dispersion adhesive for fitted carpeting, CV and PVC coverings, rubber and linoleum Uses Ground rubber floor coverings in sheets and tiles PVC floor coverings in sheets or tiles, PVC design floor coverings CV floor coverings PVC composite floor coverings with polyester or mineral fibre backing Linoleum in sheets/rolls Carpets with different types of backing Needle felts Suitable for absorbent subfloors Advantages Wide range of applications Strong initial adhesive grab Good resistance against plasticizer Very easy to apply Solvent-free and low emissions (EC-1) Compatible with underfloor heating Suitable for furniture with castors 4 I 5

6 Application Matrix and Product Properties Sika Products SikaBond Lino-1 SikaBond Vinyl-1 SikaBond Carpet-1 SikaBond Carpet Uni SikaBond Floor Uni General description of the adhesives Wet adhesive for linoleum on absorbent substrates Wet adhesive for carpets on absorbent substrates Wet adhesive for carpets/allrounder on absorbent substrates Floor Coverings Pressure sensitve adhesive for PVC/CV on absorbent or nonabsorbent substrates Wet adhesive for all types of floor coverings on absorbent substrates Linoleum sheets Cork underlaym. all types PVC all types CV with fleece (Cushioned Vinyl) without fleece with synthetic back with PVC back Carpet needle felts ( ) with fleece, woven or natural fibres Rubber floor all types For stairs and skirting all types recommended ( ) only suitable for light-weight needle felts Adhesive Types There are two different types of SikaBond floor covering adhesives: Wet, and dry (also known as pressure-sensitive ) adhesives. The wet adhesives have shorter flash-off times and the floor coverings have to be installed immediately, at the latest 30 minutes after application of the adhesive. The dry or pressure-sensitive adhesives have longer flash-off times and remain tacky even after the complete evaporation of water from the adhesive. Dependent on the backing of the floor covering (PVC, rubber, fleece, synthetic or jute fabric, etc.) the most suitable adhesive must be selected. The environmental conditions and the absorbency of the subfloor must also be considered because of their major influence on flash-off, installation and drying times. Properties SikaBond Lino-1 SikaBond Vinyl-1 SikaBond Carpet-1 SikaBond Carpet Uni SikaBond Floor Uni Flash-off time max.15 min min 5 20 min 5 20 min min Installation time ~ 15 min ~ 60 min ~ 20 min ~ 30 min ~ 30 min Drying time ~ 24 h ~ 24 h ~ 48 h ~ 48 h ~ h Notched trowel* TKB/B1 TKB/A1, A2, B1 TKB/B1 TKB/B1, B2 TKB/A1, A2, B1, B2 Consumption ~ g/m² ~ g/m² ~ 450 g/m² ~ 450 g/m² ~ g/m² *Also dependent on the type of backing of the floor covering material and the nature of the substrate. All indicated times may vary according to environmental conditions and the subfloor absorbency.

7 4 I 5

8 Typical Floor Covering System Build-Ups Continuous refurbishment works, tight time schedules and difficult surfaces are just a few of the challenges we have to face on today s projects. Sika can help to simplify the work and speed up the construction programme. With proven, technically correct and innovative products Sika is able to provide solutions for almost every situation or problem that can occur on a flooring project. All of these Sika products are part of an overall system and are designed to be fully compatible with each other. The following outline system descriptions are a selection of 5 of the most commonly used build-ups. For further information on these and other flooring system build-ups, please contact your local Sika Technical Services Department. Floor Coverings on Absorbent Subfloors 1. Cement based screed correctly prepared 2. Before the application of SikaBond the use of primer Sika Level-01 Primer is recommended to reduce suction. 3. SikaBond adhesive 4. Floor covering Floor Coverings on Non-Absorbent or Moisture Sensitive Surfaces 1. Calciumsulphate-based screed, stone wood, magnesite or other substrates 2. Acrylic primer Sika Level-01 Primer 3. Self-levelling mortar Sika Level (at least 2 mm thick and for rubber flooring at least 3 mm) 4. SikaBond adhesive 5. Floor covering

9 Floor Coverings on Adhesive Residues 1. Existing screed with adhesive residues (at least 50% of the residues must be removed in a chequered pattern) 2. 2-component primer Sika Primer MB or Sika Primer MR Fast (broadcast with sand) 3. Self-levelling mortar Sika Level (at least 2 mm thick and for rubber flooring at least 3 mm) 4. SikaBond adhesive 5. Floor covering Floor Coverings on Uneven and Dry Subfloors 1. Cement based screed correctly prepared 2. Waterbased primer Sika Level-01 Primer 3. Self-levelling mortar Sika Level (from 2 up to 40 mm, dependent on the thickness required and the product selected, for rubber flooring at least 3 mm) 4. SikaBond adhesive 5. Floor covering Floor Coverings on Even or Uneven Subfloors with a High Moisture Content ( 4% CM) 1. Cement based screed correctly prepared 2. 2-component primer Sika Primer MB or Sika Primer MR Fast (broadcast with sand) 3. Self-levelling mortar Sika Level (from 2 to 40 mm thickness as required, for rubber flooring at least 3 mm) 4. SikaBond adhesive 5. Floor covering H ² O 8 I 9

10 Additional Sika Flooring Solutions Solutions for Surface Preparation Solutions for Wood Floor Bonding Solutions for Tiling Solutions for Resin Floors Solutions for Joint Sealing

11 Sika Level and Sika Primer Sika Level cementitious underlayment mortars for levelling-up uneven substrates provide a very smooth surface and therefore also lower the consumption of the floor covering adhesive. The Sika Level solutions can be applied at layer thicknesses up to 40 mm with very low emissions and the range includes primers for use as sealers and / or moisture barriers below the underlayment mortars. SikaBond Low emissions, ease of use and excellent adhesion were also important factors when Sika developed wood floor bonding adhesives for today s market. With special solutions for sound damping, our extensive range of elastic adhesives, moisture barriers, environmentally friendly primers and ergonomic application equipment such as the SikaBond Dispenser, Sika shows competence and responsibility. SikaCeram Tile adhesives and grouts are an important part of the Sika flooring product range. The products are also designed to be compatible for use in conjunction with Sika s wet-room waterproofing systems, ready mix floor screeds and Sikaflex or Sikasil elastic jointing solutions. Therefore Sika is well positioned and able to meet all of our customers requirements on site, and with fully compatible systems. Sikafloor Comprehensive resin flooring solutions from Sika allow the creation of an almost unlimited combination of functional and aesthetic floors. Sika provides decorative resin comfort floors for commercial, health, educational and residential buildings, plus industrial resin floors with high mechanical and chemical resistance. The range also includes special solutions for car parks, the food industry, clean rooms and many other demanding and specific applications. Sikaflex Sika s R&D invented 1-part polyurethane sealants and today these have been developed with the experience from more than 50 years of joint sealing around the world. The extensive range of well proven Sikaflex products now provides floor joint sealing solutions that are easy to apply, and with high mechanical resistance, which guarantees a long service-life and low maintenance costs for your projects. 10 I 11

12 Also available from Sika Sika Services AG Corporate Construction CH-8048 Zürich Switzerland Phone Fax Your local Sika Company Our most current General Sales Conditions shall apply. Please consult the Product Data Sheet prior to any use and processing. Innovation & since Consistency 1910 since 1986 since 1997 ISO Certified Quality System 9001/ EN Certified Management System ISO Innovation & since Consistency 1910 Sika Full Range Solutions for Construction Concrete Production Waterproofing Flooring Sika ViscoCrete Sika Retarder Sika SikaAer Sikaplan, Sikalastic Sika & Tricosal Water stops Sika Injection Systems Sikafloor SikaBond Corrosion and Fire Protection Concrete Repair and Protection Structural Strengthening SikaCor Sika Unitherm Sika MonoTop Sikagard Sikadur Sika CarboDur SikaWrap Sikadur Joint Sealing Grouting Roofing Sikaflex Sikasil Also Available from Sika Sika Services AG Business Unit Contractors Speckstrasse 22 CH-8330 Pfäffikon Switzerland Phone Fax Sikadur SikaGrout SikaBond Dispenser-5400 and SikaBond -T52 FC Elastic Wood Floor Installations in Hotels and Commercial Buildings Increased Possibilities for Architects S&W / 05SIC / Sika Services AG, Switzerland Construction SikaBond Dispenser-5400 and SikaBond -T52 FC The Evolution in Wood Floor Bonding Sika Competence for the Elastic Bonding of Solid Wood Floors Our most current General Sales Conditions shall apply. Please consult the Product Data Sheet prior to any use and processing. Sarnafil Sikaplan SikaRoof MTC Sika Services AG / BU Contractors / Sealing and Bonding / SikaBond Adhesives for Floor Coverings / / RB Innovation & Consistency since 1910