Eco Audit Report. Energy and CO2 Footprint Summary: Cubierta Norte 1. Product Name Product Life (years) Energy Details... CO2 Details...
|
|
|
- Clare Dixon
- 7 years ago
- Views:
Transcription
1 Eco Audit Report Product Name Product Life (years) Cubierta Norte 1 Energy and Footprint Summary: Energy Details... Details... Phase Energy (MJ) Energy () () Material Manufacture Transport Use Disposal Total (for first life) potential 0 0 NOTE: Differences of less than 20 are not usually significant. Page 1 of 6 See notes on precision and data sources.
2 Eco Audit Report Energy Analysis Energy (MJ)/year Equivalent annual environmental burden (averaged over 1 year product life): 626 Detailed breakdown of individual life phases Material: Material Recycled content* () Part mass Qty. Total mass Energy (MJ) Forjado Madera OSB III Particleboard parallel to board Virgin (0) e EPDM Ethylene propylene terpolymer (EPDM) Virgin (0) e Aislante Poliestireno Estruido Rigid polystyrene foam Virgin (0) Lamina retenedora 500g Geotextiles Virgin (0) Poliuretano Elastomeric polyurethane foam Virgin (0) e Total e *Typical: Includes 'recycle fraction in current supply' Manufacture: Process Amount processed Energy (MJ) EPDM Polymer molding 2 kg Aislante Poliestireno Estruido Polymer extrusion 0.6 kg Poliuretano Polymer extrusion 1.1 kg Total Transport: Breakdown by transport stage Total product mass = 18 kg Stage name Transport type Distance (km) Energy (MJ) Total 100 Breakdown by components mass Energy (MJ) Forjado Madera OSB III 14 0 EPDM 2 0 Aislante Poliestireno Estruido Lamina retenedora 500g Poliuretano Total Page 2 of 6
3 Use: Relative contribution of static and mobile modes Mode Energy (MJ) Static 0 Mobile 0 Disposal: Energy (MJ) Forjado Madera OSB III None EPDM Landfill Aislante Poliestireno Estruido Landfill Lamina retenedora 500g Landfill Poliuretano Landfill Total EoL potential: Forjado Madera OSB III None 0 EPDM Landfill 0 Aislante Poliestireno Estruido Landfill 0 Lamina retenedora 500g Landfill 0 Poliuretano Landfill 0 Energy (MJ) Notes: Page 3 of 6
4 Eco Audit Report Footprint Analysis /year Equivalent annual environmental burden (averaged over 1 year product life): 32.4 Detailed breakdown of individual life phases Material: Material Recycled content* () Part mass Qty. Total mass Forjado Madera OSB III Particleboard parallel to board Virgin (0) EPDM Ethylene propylene terpolymer (EPDM) Virgin (0) Aislante Poliestireno Estruido Rigid polystyrene foam Virgin (0) Lamina retenedora 500g Geotextiles Virgin (0) Poliuretano Elastomeric polyurethane foam Virgin (0) Total *Typical: Includes 'recycle fraction in current supply' Manufacture: Process Amount processed EPDM Polymer molding 2 kg Aislante Poliestireno Estruido Polymer extrusion 0.6 kg Poliuretano Polymer extrusion 1.1 kg Total Page 4 of 6
5 Transport: Breakdown by transport stage Total product mass = 18 kg Stage name Transport type Distance (km) Total 100 Breakdown by components mass Forjado Madera OSB III 14 0 EPDM 2 0 Aislante Poliestireno Estruido Lamina retenedora 500g Poliuretano Total Use: Relative contribution of static and mobile modes Mode Static 0 Mobile 0 Disposal: Forjado Madera OSB III None EPDM Landfill Aislante Poliestireno Estruido Landfill Lamina retenedora 500g Landfill Poliuretano Landfill Total EoL potential: Forjado Madera OSB III None 0 EPDM Landfill 0 Aislante Poliestireno Estruido Landfill 0 Lamina retenedora 500g Landfill 0 Poliuretano Landfill 0 Page 5 of 6
6 Notes: Page 6 of 6
Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste
Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste Joseph P. Greene California State University, Chico Chico, CA 95929-0789 Abstract Plastic products can be made more sustainable by reducing
Nuiqsut - City Building Roof Repair
Total Project Snapshot Report 2014 Legislature TPS Report 62228v1 Agency: Commerce, Community and Economic Development Grants to Municipalities (AS 37.05.315) Grant Recipient: Nuiqsut Project Title: Nuiqsut
Life Cycle Design of a Fuel Tank System
United States National Risk Management Environmental Protection Research Laboratory Agency Cincinnati, OH 45268 Research and Development EPA/600/SR-97/118 December 1997 Project Summary Life Cycle Design
BIOPLASTICS & SUSTAINABILITY
BIOPLASTICS & SUSTAINABILITY Seminar Biobased Food Packaging FRANCOIS DE BIE 6/29/2015 Corbion Purac PLA cradle to cradle lifecycle 2 Bioplastics in the market today Albert Heijn Flex Pack 100% PLA Coca-Cola
Life Cycle Inventory Packaging Options for Shipping Soft Goods in E-Commerce and Catalog Sales
Packaging Waste Reduction Life Cycle Inventory Packaging Options for Shipping Soft Goods in E-Commerce and Catalog Sales Businesses, individuals, and governments shipping non-breakable items via a common
City of Toronto Waste Audits Presented to Residual Waste Working Group
City of Toronto Waste Audits Presented to Residual Waste Working Group City of Toronto Solid Waste Management Services Policy & Planning Irene Ford Monday February 11 th, 2008 Outline Waste Audits Conducted
Life Cycle Assessment of Hand Drying Systems
Life Cycle Assessment of Hand Drying Systems September 19, 2011 Commissioned by Dyson, Inc. Prepared by Materials Systems Laboratory Massachusetts Institute of Technology Trisha Montalbo Jeremy Gregory
COMMERCIAL & LOW SLOPED ROOF SPECIALISTS TOTAL NDL SYSTEM MANUFACTURER WARRANTIES
C COMMERCIAL & LOW SLOPED ROOF SPECIALISTS We are equipped to handle the largest of your commercial roof needs. Whether storm damage or simply needing a new commercial roof due to age, Cobalt allows you
PEAK DISTRICT NATIONAL PARK AUTHORITY ENVIRONMENTAL MANAGEMENT ANNUAL PERFORMANCE REPORT 2013/2014
2009/10 2010/11 2011/12 2012/13 2013/14 2014/15 2015/16 2016/17 Carbon emissions (kgco2) Page 1 PEAK DISTRICT NATIONAL PARK AUTHORITY ENVIRONMENTAL MANAGEMENT ANNUAL PERFORMANCE REPORT 2013/2014 1. INTRODUCTION
SORTING PLASTICS FOR RECYCLING INTRODUCTION
SORTING PLASTICS FOR RECYCLING INTRODUCTION Description Students use the difference in densities of polymers and flame tests as a basis for the development of a scheme to separate plastics. Goals for This
GSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GII GAI GCI. GRI Test Method GM21
Geosynthetic Institute 4 Kedron Avenue Folsom, PA 133-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 4: December 17, 2012 Revision schedule on pg. 11 GRI Test Method GM21
Product Environmental Profile Step Down Transformers
Product Environmental Profile Step Down Transformers Product overview Step-down transformers are used to convert a higher input voltage (208-200 V) to a lower output voltage (120-100 V). They are used
WORLD PLASTICS MARKET REVIEW. By Bill Kuhlke and Dr. Tom Walsh
WORLD PLASTICS MARKET REVIEW By Bill Kuhlke and Dr. Tom Walsh OUTLINE OVERVIEW OF THE PLASTICS INDUSTRY MAJOR THERMOPLASTICS TO BE REVIEWED POLYETHYLENE POLYPROPYLENE POLYSTYRENE CONCLUSIONS THE PLASTICS
NEW ELECTRICAL SUBSTATION Building 300 SECTION 07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK
ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
Effect of Sterilization Techniques on Polymers
Effect of Sterilization Techniques on Polymers Contents of Presentation Introduction to Polymers Properties and Stability of Polymers Affect of Ionising Radiation and Ethylene Oxide on Polymers The need
A guide to our recycling And waste management services
A guide to our recycling And waste management services SITA UK provides recycling and waste management services for more than 40,000 organisations across the UK These organisations choose SITA UK because
Laboratory Report P12850.03.09. Simulated Wind Uplift Testing of Adhered Single-Ply Roofing Systems in accordance with FM Standard 4470, Appendix C
Simulated Wind Uplift Testing of Adhered Single-Ply Roofing Systems in accordance with FM Standard 4470, Appendix C Prepared for: 2100 River Edge Parkway, Suite 175 Atlanta, GA 30328 Date of Issuance:
COMPARATIVE PRODUCT LIFECYCLE ASSESSMENT NIKE, Inc. Product Comparisons
COMPARATIVE PRODUCT LIFECYCLE ASSESSMENT NIKE, Inc. Product Comparisons A footprint includes many different kinds of impacts that must be measured through the scientific evaluation of all processes and
May not be reproduced in any form without permission from the publisher, except fair uses permitted under U.S. or applicable copyright law.
: Ecoe Ediciones,. p 41 http://site.ebrary.com/id/10565517?ppg=41 : Ecoe Ediciones,. p 42 http://site.ebrary.com/id/10565517?ppg=42 : Ecoe Ediciones,. p 43 http://site.ebrary.com/id/10565517?ppg=43 : Ecoe
PARALOID KM-1 Acrylic Impact Modifier
Technical Data Sheet PARALOID KM-1 Acrylic Impact Modifier For Weatherable Vinyl Building Applications Regional Product Availability Description Europe PARALOID KM-1 Acrylic Impact Modifier belongs to
Insulation R-Value Comparisons
Insulation R-Value Comparisons American Ingenuity s component panels for the 22 48 domes contains seven inch thick rigid Expanded Polystyrene (E.P.S.) insulation which has an R value of 28. American Ingenuity
GaBi Hand Dryer Tutorial
UNIVERSITY OF TEXAS, EL PASO GaBi Hand Dryer Tutorial MFG 5390/IE 5390/ IE 4395 GREEN ENERGY MANUFACTURING CLASS Fall- 2013 Contents Purpose of the Tutorial... 3 Introduction... 4 Life Cycle Analysis...
Final Report. Life Cycle Impact Assessment of Aluminum Beverage Cans. Aluminum Association, Inc. Washington, D.C. PE Americas.
May 21, 2010 Final Report Life Cycle Impact Assessment of Aluminum Beverage Cans Prepared for: Aluminum Association, Inc. Washington, D.C. Prepared by: Contact: Nuno da Silva Neil d Souza 344 Boylston
Documentation. Mechanical Recycling versus Incineration of PVC waste. Greenhouse gas emissions. European Council of Vinyl Manufacturers (ECVM)
Documentation Mechanical Recycling versus Incineration of PVC waste Greenhouse gas emissions European Council of Vinyl Manufacturers (ECVM) Title: Mechanical recycling versus incineration of PVC waste
Elastoseal EPDM Tanking System Waterproofing of basements, foundations and cut-and-cover tunnels
Elastoseal EPDM Tanking System Waterproofing of basements, foundations and cut-and-cover tunnels EPDM Rubber - facts about EPDM Product range Elastoseal EPDM Tanking membrane can either be supplied in
PG CERTIFICATE COURSE : POLYURETHANE FOAM CHEMISTRY AND TECHNOLOGY FOR: EXECUTIVES, ENGINEERS AND MANAGERS LEVEL
PG CERTIFICATE COURSE : POLYURETHANE FOAM CHEMISTRY AND TECHNOLOGY FOR: EXECUTIVES, ENGINEERS AND MANAGERS LEVEL CERTIFICATE COURSES IN POLYURETHANE FOAM CHEMISTRY AND TECHNOLOGY: Enroll :Any time flexible
1 Description and assessment of the Materials used in the Product. 3 Description and assessment of the Surface Treatment Methods
Kimmo Sundström page 1 of 6 James mesh back Environmental impact assessment 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description
Closing the loop: Rubber Recycling. Joint seminar Kumi-instituutti instituutti & MOL
Closing the loop: 1 Rubber Recycling Joint seminar Kumi-instituutti instituutti & MOL Contents 2 - Introduction - Present: Rubber crumb Surface activated rubber crumb Reclaim / devulcanizate - Future Introduction
ORGANIC PEROXIDES / Polymer crosslinking
ORGANIC PEROXIDES / Polymer crosslinking Organic peroxides product range for crosslinking ARKEMA, Innovative Chemistry The Arkema group is one of the main global producers of organic peroxides. Its expertise
Embodied Energy of Building Envelopes and its Influence on Cooling Load in Typical Indonesian Middle Class Houses
Embodied Energy of Building Envelopes and its Influence on Cooling Load in Typical Indonesian Middle Class Houses Agya Utama and Shabbir H. Gheewala The Joint Graduate School of Energy and Environment,
Method to take into account material recycling and end of life in LCA
Method to take into account material recycling and end of life in LCA LCA Forum Lausanne, 22 November 2007 Dr J.-S. Thomas ArcelorMittal Research C. Broadbent IISI Overview Steel recycling IISI and Steel
Injection Molding Handbook Herausgegeben von Tim A. Osswald, Lih-Sheng Turng, Paul Gramann
Injection Molding Handbook Herausgegeben von Tim A. Osswald, Lih-Sheng Turng, Paul Gramann ISBN-10: 3-446-40781-2 ISBN-13: 978-3-446-40781-7 Leseprobe Weitere Informationen oder Bestellungen unter http://www.hanser.de/978-3-446-40781-7
Avoiding the Landfill: The Recycling of Vinyl Roof Membranes
Avoiding the Landfill: The Recycling of Vinyl Roof Membranes With its European counterparts blazing the trail, the North American vinyl (PVC) roofing industry has entered a new phase in its commitment
TRAVEL HABITS NOW AND THEN
TRAVEL HABITS NOW AND THEN Goal(s): The pupils are aware of travel habits now and in the past generations in terms of the distances travelled, the choice of mode of transportation and the impact these
How To Understand The Purpose Of Life Cycle Assessment
Life-Cycle Assessment Lesson 1 Overview This is the first lesson on life cycle assessment in this module. In this lesson, the framework for conducting life-cycle assessments is described and examples of
Life Cycle Assessment of Reusable and Single-use Plastic Bags in California
California State University, Chico Institute for Sustainable Development Life Cycle Assessment of Reusable and Single-use Plastic Bags in California January 2011 Produced under contract by: California
A TruE story On GrEEn PAcKAGInG
europe & international A TruE story On GrEEn PAcKAGInG SoLuTionS. For Your SucceSS. /gogreen Watch the video A true story green claims green facts green range PAcKAGInG Is GrEEn! no. no packaging or packaging
UNIT 1 MASS AND LENGTH
UNIT 1 MASS AND LENGTH Typical Units Typical units for measuring length and mass are listed below. Length Typical units for length in the Imperial system and SI are: Imperial SI inches ( ) centimetres
LIFE CYCLE IMPACTS OF ALKALINE BATTERIES WITH A
LIFE CYCLE IMPACTS OF ALKALINE BATTERIES WITH A FOCUS ON END OF LIFE A STUDY CONDUCTED FOR THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION Draft release to internal group: June 2010 External review:
An environmental comparison of paper and plastic labels. Chris Edwards & Gary Parker Intertek Expert Services
An environmental comparison of paper and plastic labels Chris Edwards & Gary Parker Intertek Expert Services Introduction To provide retailers with an understanding of the carbon footprint of paper and
A clean energy solution from cradle to grave
Environmental Product Declaration A clean energy solution from cradle to grave Offshore wind power plant employing SWT-6.0-154 siemens.com / wind 2 Assessing the performance of a wind power plant The environmental
Reduce Reduce Reduce. Reuse. Reuse. Recycle. Recycle. Lesson: Plastic Polymers. Background: Procedures:
Lesson: Plastic Polymers Grade: 4-5 Subject: Science Objectives: Students will: conduct a series of tests to determine the properties of different types of plastics audit the plastic waste generated in
3M Ionic Liquid Antistat FC-4400
Technical Data September 14 3M Ionic Liquid Antistat FC-40 Introduction 3M Ionic Liquid Antistat FC-40 is a high purity antistatic additive compatible with a variety of high performance polymer systems,
The BOMBARDIER* REGINA*
TALENT 2 REGINA Intercity X55 Environmental Product Declaration Environmental Product Declaration The BOMBARDIER* REGINA* Intercity X55 train reflects our dedication to developing products and services
TPO: Getting Better With Age
TPO: Getting Better With Age By Michael Mendoza, TPO product manager, Firestone Building Products Thermoplastic polyolefin has matured. By any criteria, TPO is no longer the new kid on the block when it
Benefits of Thermax N990 in EPDM Compounds
TECHNICAL BULLETIN EPDM Compounds Thermax medium thermal carbon black N990 is manufactured by the thermal decomposition of natural gas. The thermal process provides a unique carbon black characterized
Resistance of Plastics to Gamma Irradiation
Elastomers 1 MATERIAL TOLERANCE LEVEL (kgy) COMMENTS Butyl 50 Sheds particulate after irradiation. Ethylene Propylene 100 200 Crosslinks, yellows slightly. Diene Monomer (EPDM) Fluoro Elastomer 50 Avoid
Fire 2This Technical Bulletin has been commissioned by the UK SIP Association in
REV 1-12.12.11/TB002 Technical Bulletin Fire 2This Technical Bulletin has been commissioned by the UK SIP Association in conjunction with TRADA Technology and is intended to provide the reader with introductory
Battery and Plastics recyclingpresent
The Stena Metall Group Eletronics Recycling. 1 Battery and Plastics recyclingpresent research July 2, 2013 Speaker: Christer Forsgren, - Environmental & Technical director, Stena Metall AB - Adjunct Professor
Carbon Sequestration Tool Background and User Guide
Carbon Sequestration Tool Background and User Guide Table of Contents Quick Start Methodology Content of Worksheets Frequently Asked Questions Quick Start 1. Determine which of the two carbon tools you
Fiber Recycling in the United States
Fiber Recycling in the United States Youjiang Wang School of Materials Science & Engineering, Georgia Institute of Technology Atlanta, Georgia 30332-0295 USA Abstract Due to the growth in world population
IMPACT OF PLASTICS PACKAGING ON LIFE CYCLE ENERGY CONSUMPTION & GREENHOUSE GAS EMISSIONS IN THE UNITED STATES AND CANADA Substitution Analysis
IMPACT OF PLASTICS PACKAGING ON LIFE CYCLE ENERGY CONSUMPTION & GREENHOUSE GAS EMISSIONS IN THE UNITED STATES AND CANADA Substitution Analysis PREPARED FOR The American Chemistry Council (ACC) and The
1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
STANDARD and CUSTOM ELASTOMERIC EXTRUSIONS and MOLDED PARTS. products corporation
STANDARD and CUSTOM ELASTOMERIC EXTRUSIONS and MOLDED PARTS products corporation T U B I N G S E A L S G A S K E T S T A B L E of contents Vanguard Products Corporation............................2 Gasket
Life cycle assessment of example packaging systems for milk
Final Report Life cycle assessment of example packaging systems for milk Retail Distribution System A Life Cycle Assessment covering the potential environmental impact of different example milk containers
COMPARATIVE PERFORMANCE OF EPDM RUBBER ROOFING MEMBRANE AS PROTECTION AGAINST HAIL DAMAGE
www.epdmroofs.org COMPARATIVE PERFORMANCE OF EPDM RUBBER ROOFING MEMBRANE AS PROTECTION AGAINST HAIL DAMAGE By Ric Vitiello President Forensic Roof Consulting and Hail Damage Assessment Training www.benchmark-services.com
Estimated emissions and CO2 savings deriving from adoption of in-place recycling techniques for road pavements
Estimated emissions and CO2 savings deriving from adoption of in-place recycling techniques for road pavements Introduction Objective: to estimate the CO2 emissions produced by road surface construction
Facts About Windows XP
EN ES Windows and doors Ventanas y puertas II CONSTRUCTION DETAILS / Detalles constructivos II 0 ~ ~0. INTERIOR DOOR WITH DOOR FRAME / Puertas interiores con marco. FLOOR COVERING / Entarimado. FLOOR PANEL
O Ring Guide Issue 7. High Performance Sealing Technology
O Ring Guide Issue 7 The comprehensive guide to O ring sealing systems including O ring selection General & high performance materials Housing design & tolerances Cords, kits & lubricants High Performance
Prefabricated building PVC vertical sliding window
Prefabricated building PVC vertical sliding window SLOVENSKO ITALIA ESPAÑA ITALIA The company, we have the pleasure to introduce in this brochure, is an important and dynamic industrial company located
FlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process
Page 1(6) Fly Me CHAIR 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods
How To Do A Complete Life Cycle Analysis Of Packaging
INTRODUCES A Time for Clarity WHY COMPLETE LCAs MATTER Climate change is one of the greatest challenges of our time. In responding to the imperative to reduce greenhouse gases, O-I feels a strong sense
Physics 41 HW Set 1 Chapter 15
Physics 4 HW Set Chapter 5 Serway 8 th OC:, 4, 7 CQ: 4, 8 P: 4, 5, 8, 8, 0, 9,, 4, 9, 4, 5, 5 Discussion Problems:, 57, 59, 67, 74 OC CQ P: 4, 5, 8, 8, 0, 9,, 4, 9, 4, 5, 5 Discussion Problems:, 57, 59,
An Introduction to Product Takeback
An Introduction to Product Takeback Overview Driving forces behind product takeback Product takeback legislation Product end-of-life options Reverse logistics Case study Motivation for Product Takeback
LCA of recycled concrete: Environmentally superior to virgin concrete?
HO CHS CHULE F ÜR T E CHNI K RAPPERSW IL I BU INS T I T UT F ÜR BAU UND UM W EL T avnir 2013 Nov 5 th : LCA of recycled concrete: Environmentally superior to virgin concrete? 1. Why such a study, and how?
Contributions to the Legislative Provisions Governing the Management of Waste Containing Asbestos in Romania and EU
Theoretical and Applied Economics Volume XVIII (2011), No. 9(562), pp. 149-154 Contributions to the Legislative Provisions Governing the Management of Waste Containing Asbestos in Romania and EU Silvian
Criteria for eco-efficient (sustainable) plastic recycling and waste management
Report Sept. 11 th 2014 Version 1.2 Criteria for eco-efficient (sustainable) plastic recycling and waste management Fact based findings from 20 years of denkstatt studies Background report for associated
Petrochemical Industry Ethylene Plant
Petrochemical Industry Ethylene Plant Application note The Ethylene Plant provides the base feedstock for a number of critical products used throughout the petrochemical industry. Compounds ranging from
Lonbakken Steel Staircase t. 6100 Product
1114 Ver. 2:2014 ENVIRONMENTAL PROUCT ECLARATION In accordance with ISO 14025 ISO 21930 EN 15804 Publisher eclaration number Issue date Valid to epdnorge logo The Norwegian EP Foundation NEP00282E 25.11.2014
GPEC 2004 Paper Abstract #37: Title: Soy vs. Petro Polyols, A Life Cycle Comparison. Author(s): J. Pollack, Omni Tech International, Ltd.
GPEC 2004 Paper Abstract #37: Title: Soy vs. Petro Polyols, A Life Cycle Comparison Author(s): J. Pollack, Omni Tech International, Ltd. The 2002 Farm Bill contains a section that mandates all federal
Environmental sustainability BBC Environment Targets: Performance 2014/15
Environmental sustainability BBC Environment s: Performance 2014/15 BBC Environmental targets The data over the following pages reflects the BBC s continued commitment to reducing environmental impacts
Sustainable Purchasing Guide Promotional Items
Promotional Items Promotional Items Introduction This section provides information on currently available promotional item options that can help to move the University of Saskatchewan toward its sustainability
Background document for hexabromocyclododecane and all major diastereoisomers identified (HBCDD)
1 June 2009 Background document for hexabromocyclododecane and all major diastereoisomers identified (HBCDD) Document developed in the context of ECHA s first Recommendation for the inclusion of substances
O-Ring Reference Guide. Seal Dynamics, Inc. Worldwide Headquarters 75 Burt Drive Deer Park, New York 11729 (631) 667-4000
O-Ring Reference Guide Seal Dynamics, Inc. Worldwide Headquarters 75 Burt Drive Deer Park, New York 11729 (631) 667-4000 Seal Dynamics, Inc. Sample Product Offering O-Rings and Gaskets o Custom Molded
Records Retention and Disposal Schedule. Waste Management
Records Retention and Disposal Schedule Waste Management Version control Version Author Policy Approved By Approval Date Publication Date Review Due V 1.0 Information Governance Unit Philip Jones, Head
Plastics: An Energy-Efficient Choice
Plastics: An Energy-Efficient Choice Introduction Plastics are derived from petroleum and natural gas. With increased public awareness and concern about waste and energy issues, some have questioned whether
Factsheet. UP Resins
Factsheet UP Resins & you COMPOSITE MATERIALS UP RESINS What is a UP Resin? Unsaturated Polyester Resins (UP Resins) are durable, resinous polymers dissolved in styrene. They are used in combination with
BACKGROUND OF THE CARBON FOOTPRINT STUDY
CARBON FOOTPRINT STUDY BACKGROUND OF THE CARBON FOOTPRINT STUDY 1. Study context 2. Objectives of the study 3. Functional unit 4. Modelling assumptions and cut-off rules 4.1. Manufacturing phase 4.2. Distribution
Solution Dyed Carpet. Environmental Product Declaration ES BACKING, NYLON 6
Environmental Product Declaration Solution Dyed Carpet ES BACKING, NYLON 6 At Milliken, sustainability is core to our culture. We believe a healthy enterprise and healthy earth are vitally linked. We care
CHAPTER 7: Building Systems ROOFING SYSTEMS
ROOFING SYSTEMS Purpose Examples 1. Shingle roof system 2. Metal roof with blanket insulation 3. Metal roof with rigid insulation 4. Built-up asphalt roof system 5. Single-ply roof system 6. Modified Bitumen
CARBON ASSESSMENT TICKETING DELIVERY SYSTEMS
CARBON ASSESSMENT TICKETING DELIVERY SYSTEMS Table of Contents Executive Summary...3 1. Introduction...4 2. Method...4 3. Goal Definition and Scope...6 3.1. Purpose of Study...6 3.2. System Boundaries...7
GREEN PROCUREMENT GUIDELINES
EKSS-013 GREEN PROCUREMENT GUIDELINES (FOR SUPPLIERS) Ver. 5 August. 2010 NEC Display Solutions, Ltd. Table of Contents 1. Introduction 3 2. Scope of Application 3 3. Terms and Definitions 3 4. Essential
Recommendations for the Collection and Recycling of Spent Residential Compact Fluorescent Bulbs in Nova Scotia
Recommendations for the Collection and Recycling of Spent Residential Compact Fluorescent Bulbs in Nova Scotia Report author: Madeleine Crowell, Research Analyst Co-presenter: Ashley David, Waste Programs
PRINTED CIRCUIT BOARD RECYCLING IN AUSTRALIA
PRINTED CIRCUIT BOARD RECYCLING IN AUSTRALIA David Parsons Lecturer, Faculty of Engineering & Surveying, University of Southern Queensland, Toowoomba, Australia. E-mail: parsonsd@usq.edu.au ABSTRACT Electronic
Phys222 Winter 2012 Quiz 4 Chapters 29-31. Name
Name If you think that no correct answer is provided, give your answer, state your reasoning briefly; append additional sheet of paper if necessary. 1. A particle (q = 5.0 nc, m = 3.0 µg) moves in a region
Test report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA 18000 / Israel. J. Magner Dipl.-Ing. N. Machill.
Kiwa Polymer Institut GmbH Quellenstraße 3 65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 7013-E Testing order: Test of the waterproofing system based
A COST EFFECTIVE SOLUTION TO MANAGING BIOHAZARD WASTE
A COST EFFECTIVE SOLUTION TO MANAGING BIOHAZARD WASTE INTRODUCTION As of 2011, 7.8 billion syringes are used every year in the U.S. This number excludes veterinarian care which generates almost another
Dr. Paul Gramann The Madison Group Madison, WI 53719
New Dispersive and Distributive Mixers for Extrusion and Injection Molding Dr. Paul Gramann The Madison Group Madison, WI 53719 Dr. Chris Rauwendaal Rauwendaal Extrusion Engineering, Inc. Los Altos Hills,
MBA Polymers. Richmond, California. Use of Recovered Plastics in the Manufacture of Automobiles, Appliances & Electronic Equipment
MBA Polymers Richmond, California Use of Recovered Plastics in the Manufacture of Automobiles, Appliances & Electronic Equipment (Recycling of Mixed Plastics) Commercial Demonstration Reported Fall 1999
Printed circuit board [EDP 2005-108(0)]
![Printed circuit board [EDP 2005-108(0)]](/thumbs/27/11986520.jpg "Printed circuit board [EDP 2005-108(0)]")
Printed circuit board [EDP 2005-108(0)] 1. General 1.1. Scope and definition This requirement specifies technical considerations, declaration format and communication necessary for developing and issuing
Life-Cycle Assessment of Office Furniture Products
Report No. CSS06-11 July 7, 2006 Life-Cycle Assessment of Office Furniture Products Final report on the study of three Steelcase office furniture David V. Spitzley, Bernhard A. Dietz, and Gregory A. Keoleian
HÅG Capisco 8105 Product
16.12.2014 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025 Owner of the declaration Program holder Declaration number Issue date Valid to EPD Norge LOGO The Norwegian EPD Foundation NEPD00038E
Creep Behavior of Structural Insulated Panels (SIPs)
Creep Behavior of Structural Insulated Panels (SIPs) Results from a Pilot Study Dwight McDonald Marshall Begel C. Adam Senalik Robert J. Ross Thomas D. Skaggs Borjen Yeh Thomas Williamson United States
SAFETY DATA SHEET INSTANT HAND SANITIZER GEL / SANTI-GEL
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Product Codes : 5607, 5612, 5619, 5630, 5634, 5635, 5647, 5666, 5679, 5682, 5693, 65636, 6667 Recommended use : Hand sanitizer Product dilution
Complete Nationwide Support
Complete Nationwide Support Welcome... to ICS Service The refrigeration servicing specialists Welcome to ICS Service... and thank you for taking out a maintenance contract with us. As a new customer, you
Professional Report. Map section. Location of the system. Valkkinen Longitude: 23.667 Latitude: 61.267 Elevation: 89 m
Puulämmitys 6 x SF3 Location of the system Map section Valkkinen Longitude: 23.667 Latitude: 61.267 Elevation: 89 m This report has been created by: Samppa Takala Samppa Takala Nyrhintie 14 28760 Pori
also in this issue Automatic Doors for the People Calculating Roof Insulation R-values Waterproofing and Concrete Balconies
$7.00 solutions for the construction industry august 2012 56 TH CSI ANNUAL CONVENTION SHOW PREVIEW also in this issue Automatic Doors for the People Calculating Roof Insulation R-values Waterproofing and
joining expertise at the service of the plastic converting industry
joining expertise at the service of the plastic converting industry VKC-CENTEXBEL Etienne Sabbelaan 49 BE-8500 Kortrijk phone +32 56 29 27 00 fax +32 56 29 27 01 info@vkc.be www.vkc.be VAT BE 0459.218.289
Scheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme
Scheme rules for thermal insulation products for building equipment and industrial installations - certification scheme April 6, 2011 1. Introduction This document presents the rules of the product certification
MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods
Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4