Outer Back is Plastic Lumbar Apex Height Adjustment of 2 3/4" Clearance between armrests: 20 1/2" or 23 Arm Height Adjustment 2D 4" 4D 4 3/4"

Transcription

1 work chairs savera overview Savera, classic form with comfort and performance at an exceptionally affordable price. Savera Chairs have been designed and tested for users weighing up to 275 lbs (Swivel Tilt Task and Stool), 300 lbs (Synchro-tilt + Multi-tilt Task), 350 lbs (Guest) and 400 lbs (Savera XL) Savera Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection Task Chair with Synchro-Tilt shown. Swivel-Tilt mechanism and Multi-Tilt Mechanism also available Outer is Plastic Lumbar Apex Height of 2 3/4" Clearance between armrests: 20 1/2" or 23 Arm Height 2D 4" 4D 4 3/4" Standard Seat Height of 4" Tension Control -Tilt (Not shown) Total Arm Width 2D 1 1/2" 4D 4" Seat Depth of 2" Heavy Duty Synchro-Tilt Mechanism Five Star Base 2 3/8" Tension Control Seat Height of 4" 2 3/8" Casters are standard Heavy Duty Five Star Base SAVERA XL Statement of Line Mid- No Arms Mid- Fixed T-Arms Mid- 2D Arms Mid- 4D Arms High- No Arms High- Fixed T-Arms Swivel Stool No Arms Swivel Stool 2D Arms Swivel Stool 4D Arms XL Mid- No Arms XL Mid- Standard XL Mid- Generous High- 2D Arms High- 4D Arms

2 savera dimensions & material requirements Dimensions For Conversion to Metric, multiply dimension by 25.4 Width Between Arms Fixed T-Arms 19" 2D 17 3/4" /4" 4D 16"- 20 " XL Standard 20 1/2" XL Generous 23" WEIGHT General Use/Synchro-Tilt Task Multi-Tilt Task Stool Executive/XL 40 lbs 67 lbs 41 lbs 64 lbs Arm Height from Seat Fixed T-Arms 7 3/4" 2D 6 3/4" /4" 4D 7 1/4" - 12" XL 7" - 11" Width Task 17" XL 21" Lumbar Apex Height Task 6 1/2" - 9 1/4" XL 9" Overall Height Task Multi-Tilt-Mid- 35 1/4"-39 1/4" Synchro-Tilt-Mid- 37"-41" Task Multi-Tilt-High- 39 1/4"-43 1/4" Synchro-Tilt-High- 41"-45" Task Stool 46"-54" XL 40"-44" Height from Seat Task Mid- 20" Task High- 26" XL 23" Angle between Seat and Task XL 95 Seat Height from Floor Task Standard 14 3/4"- 18 3/4" (Multi-Tilt 15 3/4"- 19 3/4") Task High 16"- 21" (Multi-Tilt 17"- 22") Task Low 13 1/2"- 16" (Multi-Tilt 14 1/2"- 17") Stool 19 1/4"- 26 3/4" XL 17 3/4"- 21 3/4" Seat Width Task 17 3/4" XL Small 22" XL Large 22" Overall Width Task 30" XL 31 1/2" XL Small Seat 31 1/2" XL Large Seat 31 1/2" Seat Depth Task 16 1/2"- 18 1/2" General Use 17" XL Small Seat 17 1/2" XL Large Seat 20 1/4" Overall Depth Task 30" XL Small Seat 31 1/2" XL Large Seat 31 1/2" COM/COL Material Requirement More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next hide. SINGLE UPHOLSTERED DUAL UPHOLSTERED SEAT DUAL UPHOLSTERED BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft] Mid /4 4 Mid- (XL) 1 1/2 19 1/ / /4 High / /2

3 savera arm adjustment features & instructions ARM WIDTH ADJUSTMENT To adjust the arm width on Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt & Stool, push the lever down and slide the arm to the desired position. Push the lever up to lock the arm in place. Savera XL arms are fixed prior to shipping in either standard or generous position. ARM HEIGHT ADJUSTMENT ARM HEIGHT ADJUSTMENT 2D ARMS: To adjust the arm height, lift the small button on the outside of either arm to raise or lower it to the desired position. 4D ARMS: To adjust the arm height, press the button located behind either arm to raise or lower it to the desired position. Release the button to lock in place. 4D ARM PIVOT ADJUSTMENT 4D ARM SLIDER ADJUSTMENT To pivot the armrest, grasp the arm cap, rotate inward or outward and release at the desired position. Not available on Savera XL. To adjust the arm cap depth position, grasp the arm cap and firmly slide forward or backward to the desired position.

4 savera synchro-tilt adjustment features & instructions BACK TILT ADJUSTMENT TENSION CONTROL SYNCHRO-TILT TASK: The tilt control paddle on the left locks the chair into four different positions. To tilt the chair, sit in the chair and unlock the paddle by pushing it down, which will release the back to free flow. To lock in position, pull the paddle up and the back will lock in position. SYNCHRO-TILT TASK: The tension-adjustment wheel for the synchro tilt Task chair is located on the right. Leaning back, decide if the resistance of the chair is comfortable. If it is too stiff, turn the tension adjustment knob counter-clockwise. If the chair back does not provide enough resistance, turn the knob clockwise. LUMBAR HEIGHT ADJUSTMENT SEAT HEIGHT ADJUSTMENT The lumbar height-adjustment levers for Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt & Stool are found on both sides of the chair. Pull both levers up or down to the desired position. Savera XL does not have lumbar height adjustment. SEAT DEPTH ADJUSTMENT The seat height-adjustment paddle for Savera Synchro-Tilt, Swivel-Tilt & XL is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. The seat height-adjustment paddle for Savera Stool functions the same but the paddle is located on the left side. SWIVEL-TILT & SYNCHRO-TILT-TASK: The lever is located on the left-hand side, near the front. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the lever to lock the seat in place. See Savera arm adjustment features & instructions page at the beginning of this section for arm details.

5 savera XL adjustment features & instructions BACK TILT ADJUSTMENT TENSION CONTROL SYNCHRO-TILT XL: The back tilt adjustment paddle is located underneath the seat on the left side. The back tilt adjustment provides the ability to lock the back into four different positions or leave in free-flow. To tilt the chair, sit in the chair and unlock the paddle by pulling it up, which will release the back to free flow. To lock the desired position, push the paddle down and the back will lock. SYNCHRO-TILT XL: The tension-adjustment wheel is located underneath the seat on the right side. Leaning back with the back tilt adjustment paddle in the up position, determine if the resistance of the chair is comfortable. If the resistance is too stiff, turn the tension adjustment wheel counter-clockwise. If the chair back does not provide enough resistance, turn the wheel clockwise. SEAT HEIGHT ADJUSTMENT The seat height-adjustment paddle for Savera Synchro-Tilt, Swivel-Tilt & XL is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. The seat height-adjustment paddle for Savera Stool functions the same but the paddle is located on the left side. See Savera arm adjustment features & instructions page at the beginning of this section for arm details.

6 savera multi-tilt adjustment features & instructions BACK TILT ADJUSTMENT TENSION CONTROL The Tilt control lever is on the right-hand side and is located at the farther back position. To lock the back, lean back to the desired angle and firmly push the lever down to engage it. To unlock and free-float, firmly pull up the lever to the horizontal position. The tension adjustment knob for the multi-tilt is located in the middle, directly under the front of the seat. Turning the knob counterclockwise will increase the tension and clockwise will decrease the tension. LUMBAR HEIGHT ADJUSTMENT SEAT HEIGHT ADJUSTMENT The lumbar height-adjustment levers for Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt & Stool are found at the sides of the chair. Pull levers up or down to the desired position. Savera XL does not have lumbar height adjustment. SEAT DEPTH ADJUSTMENT The seat height adjustment paddle on the Multi-Tilt is located on the right-hand side, underneath the arm post. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. SEAT ANGLE ADJUSTMENT The paddle is located on the left-hand side, near the back. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the lever to lock the seat in place. The Forward-Tilt knob is located closest to the front. Rotate it forward and rearward to adjust the seat angle incline. The seat angle may be infinitely adjusted when the paddle is in the horizontal position. Firmly push the lever down to lock the seat angle and pull up to the horizontal position to allow freefloating.

7 savera swivel-tilt adjustment features & instructions BACK TILT ADJUSTMENT TENSION CONTROL SWIVEL-TILT TASK: The back-tilt control lever is located on the right near the front. To tilt the chair, sit in the chair and pull the handle outward. Leaving the handle in this position, the chair is now in free flow mode and can reach any position between upright and fully reclining. To lock (upper position only), bring chair to upright position and push the handle in. SWIVEL-TILT TASK: The tension-adjustment knob for the swivel-tilt is located in the middle directly under the seat. Turning the knob will increase or decrease tension. LUMBAR HEIGHT ADJUSTMENT SEAT HEIGHT ADJUSTMENT The lumbar height-adjustment levers for Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt & Stool are found at both sides of the chair. Pull both levers up or down to the desired position. Savera XL does not have lumbar height adjustment. SEAT DEPTH ADJUSTMENT The seat height-adjustment paddle for Savera Synchro-Tilt, Swivel-Tilt & XL is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. The seat height-adjustment paddle for Savera Stool functions the same but the paddle is located on the left side. SWIVEL-TILT & SYNCHRO-TILT-TASK: The lever is located on the left-hand side, near the front. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the lever to lock the seat in place. See Savera arm adjustment features & instructions page at the beginning of this section for arm details.

8 savera swivel-stool adjustment features & instructions STOOL SEAT HEIGHT STOOL FOOT RING HEIGHT To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired level and then release to lock in place. To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired level and then release to lock in place. To raise or lower the stool s foot ring, turn the foot ring s knob counter clockwise to release the foot ring and adjust the ring until you reach the desired level. Turn the knob clockwise to lock in place. LUMBAR HEIGHT ADJUSTMENT The lumbar height-adjustment levers for Savera Synchro-Tilt, Swivel-Tilt & Stool are found at the sides of the chair. Pull levers up or down to the desired position. Savera XL does not have lumbar height adjustment. See Savera arm adjustment features & instructions page at the beginning of this section for arm details.

9 Xpress N S A Y Savera Synchro-Tilt Task Chair Size F Mid- H High- Mechanism 2D Arm 4D Arm Arm F Fixed T-Arms W 2D Height & Width-Adj. T-Arms Q 4D Width-, Height- & Depth- Adjustable T-Arms with Pivoting Arm Caps Fixed T-Arm Standard pneumatic cylinder provides height adjustment of 4" Seat depth adjustment of 2" Lumbar height adjustment of 2 3/4" -tilt can be locked in four positions or left free flow Frame, five star base and outer back are plastic Synchro-tilt 3:1 ratio Tension control casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Not all configurations are available as Xpress. Please see Xpress catalogue and/or specification software for details. Seat (For Dual) Seat Depth N No Seat Depth S With Seat Depth Cylinder 2 High 3 Low Base E Ebony ~ Casters, A Casters, Soft B Glides, C Glides, Soft Other Options ~ Not Fully F Fully NSAY F 1 N P L207 S 1 E F COM/ COL/ MID-BACK (F) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms MID-BACK (F) (Continued) LA LB LC LD No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Seat Depth (S) is specified add 56 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4 Pricing is continued on the following pages.

10 Xpress N S A Y Savera Synchro-Tilt Task Chair (Continued) COM/ COL/ HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms HIGH-BACK (H) (Continued) LA LB LC LD No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Seat Depth (S) is specified add 56 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4

11 N S A Y J Savera Synchro-Tilt Task Chair (CAL-TB133) Fixed T-Arm 2D Arm 4D Arm Standard pneumatic cylinder provides height adjustment of 4" Seat depth adjustment of 2" Lumbar height adjustment of 2 3/4" -tilt can be locked in four positions or left free flow Frame includes Five-Star base in Polished Aluminum Synchro-tilt 3:1 ratio Tension control casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Size Mechanism Arm Seat Depth Cylinder Base Other Options F Mid- H High- F Fixed T-Arms W 2D Height & Width-Adj. T-Arms Q 4D Width-, Height- & Depth- Adjustable T-Arms with Pivoting Arm Caps Seat (For Dual) N No Seat Depth S With Seat Depth 2 High 3 Low C9 Polished Aluminum ~ Casters, A Casters, Soft B Glides, C Glides, Soft ~ Not Fully F Fully NSAYJ F 1 N P L207 S 1 E F MID-BACK (F) Grade 1 Grade 2 Grade 3 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms HIGH-BACK (H) No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Seat Depth (S) is specified add 56 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4 CAL-TB133 flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

12 Standard pneumatic cylinder provides height adjustment of 4" Synchro-tilt 3:1 ratio Seat and back inner construction are plywood Frame, five star base and outer back are plastic Tension control Frame, five star base and outer back are plastic casters are standard and are well suited for soft flooring such as carpeting Standard vs Generous Arms: Arms are the same height adjustable style, width clearance is 20 1/2" for Standard and 23" for Generous. Arm placement is done by plant prior to shipping. Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the N S A X Savera XL Synchro-Tilt Task Chair Size F Mid- Mechanism Arm S Standard G Generous Seat (For Dual) Seat Depth S Small L Large Cylinder Base E Ebony ~ Casters, A Casters, Soft B Glides, C Glides, Soft NSAX F 1 S P L207 L 1 E A COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Standard Generous LA LB LC LD No Arms Standard Generous If Dual (D) is specified add 171 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29

13 N S A X J Savera XL Synchro-Tilt Task Chair (CAL-TB133) Pneumatic cylinder provides height adjustment of 4" Synchro-tilt 3:1 ratio Seat and back inner construction are plywood Frame includes Five-Star base in Polished Aluminum Tension control casters are standard and are well suited for soft flooring such as carpeting Standard vs Generous Arms: Arms are the same height adjustable style, width clearance is 20 1/2" for Standard and 23" for Generous. Arm placement is done by plant prior to shipping. Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Size F Mid- Mechanism Arm S Standard G Generous Seat (For Dual) Seat Depth S Small L Large Cylinder Base C9 Polished Aluminum ~ Casters, A Casters, Soft B Glides, C Glides, Soft NSAXJ F 1 S P M L 1 E A Grade 1 Grade 2 Grade 3 No Arms Standard Generous If Dual (D) is specified add 171 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 CAL-TB133 flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

14 Standard pneumatic cylinder provides height adjustment of 4" Seat depth adjustment of 2" Lumbar height adjustment of 2 3/4" Allows for independent adjustment of the back angle and seat tilt. Includes forward seat tilt and lock and infinite position seat tilt lock Frame, five star base and outer back are plastic Centre-tilt action Tension control casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Not all configurations are available as Xpress. Please see Xpress catalogue and/or specification software for details. Seat depth adjustment is included as a standard feature. Size Mechanism F Mid- H High- Arm F Fixed T-Arm W Width & Height- Adjustable T-Arms Q 4D Width, Height and Depth pivot arm Seat Cylinder - 4" range 2 Higher (taller) - 5" range 3 Lower (shorter) - 3" range N S A M Savera Multi-Tilt Task Chair Fixed T-Arm Base E Ebony 2D Arm 4D Arm ~ Casters, A Casters, Soft B Glides, C Glides, Soft ~ Not Fully F Fully NSAM F 1 N D L207 1 E A F COM/ COL/ MID-BACK (F) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed T-Arms D Width-, Height- & Depth Pivot Arms D Height & Width-Adjustable T-Arms MID-BACK (F) (Continued) LA LB LC LD No Arms Fixed T-Arms D Width-, Height- & Depth Pivot Arms D Height & Width-Adjustable T-Arms COM/ COL/ HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed T-Arms D Width-, Height- & Depth Pivot Arms D Height & Width-Adjustable T-Arms HIGH-BACK (H) (Continued) LA LB LC LD No Arms Fixed T-Arms D Width-, Height- & Depth Pivot Arms D Height & Width-Adjustable T-Arms If Dual (D) is specified add 171 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4

15 N S A M J Savera Multi-Tilt Task Chair (CAL-133) Fixed T-Arm Size Mechanism 2D Arm 4D Arm Arm Standard pneumatic cylinder provides height adjustment of 4" Seat depth adjustment of 2" Lumbar height adjustment of 2 3/4" Allows for independent adjustment of the back angle and seat tilt. Includes forward seat tilt and lock and infinite position seat tilt lock Frame includes Five-Star base in Polished Aluminum Centre-tilt action Tension control casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Seat depth adjustment is included as a standard feature. Seat Cylinder Base F Mid- H High- F Fixed T-Arm W Width & Height- Adjustable T-Arms Q 4D Width, Height and Depth pivot arm - 4" range 2 Higher (taller) - 5" range 3 Lower (shorter) - 3" range C9 Polished Aluminum ~ Casters, A Casters, Soft B Glides, C Glides, Soft ~ Not Fully F Fully NSAMJ F 1 N P L207 1 C9 A F MID-BACK (F) Grade 1 Grade 2 Grade 3 No Arms Fixed T-Arms D Width-, Height- & Depth Pivot Arms D Height & Width-Adjustable T-Arms HIGH-BACK (H) Grade 1 Grade 2 Grade 3 No Arms Fixed T-Arms D Width-, Height- & Depth Pivot Arms D Height & Width-Adjustable T-Arms If Dual (D) is specified add 171 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4 CAL-TB133 flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

16 Standard pneumatic cylinder provides height adjustment of 4" Seat depth adjustment of 2" Lumbar height adjustment of 2 3/4" -tilt locks in the upright position Frame, five star base and outer back are plastic Swivel-tilt Tension control casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Not all configurations are available as Xpress. Please see Xpress catalogue and/or specification software for details. Size F Mid- H High- Mechanism Arm F Fixed T-Arms W 2D Height & Width-Adj. T-Arms Q 4D Width-, Height- & Depth- Adjustable T-Arms with Pivoting Arm Caps Seat (For Dual) Seat Depth N No Seat Depth S With Seat Depth Cylinder 2 High 3 Low Fixed T-Arm Base E Ebony Xpress N S A W Savera Swivel-Tilt General Use Chair 2D Arm 4D Arm ~ Casters, A Casters, Soft B Glides, C Glides, Soft Other Options ~ Not Fully F Fully NSAW H 1 W P A N 3 E F COM/ COL/ MID-BACK (F) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms MID-BACK (F) (Continued) LA LB LC LD No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms COM/ COL/ HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms HIGH-BACK (H) (Continued) LA LB LC LD No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Seat Depth (S) is specified add 56 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4

17 N S A W J Savera Swivel-Tilt General Use Chair (CAL-TB133) Size F Mid- H High- Mechanism Fixed T-Arm Arm F Fixed T-Arms W 2D Height & Width-Adj. T-Arms Q 4D Width-, Height- & Depth- Adjustable T-Arms with Pivoting Arm Caps 2D Arm 4D Arm Standard pneumatic cylinder provides height adjustment of 4" Seat depth adjustment of 2" Lumbar height adjustment of 2 3/4" -tilt locks in the upright position Frame includes Five-Star base in Polished Aluminum Swivel-tilt Tension control casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Not all configurations are available as Xpress. Please see Xpress catalogue and/or specification software for details. Seat (For Dual) Seat Depth N No Seat Depth S With Seat Depth Cylinder 2 High 3 Low Base C9 Polished Aluminum ~ Casters, A Casters, Soft B Glides, C Glides, Soft Other Options ~ Not Fully F Fully NSAWJ H 1 W P A N 3 E F MID-BACK (F) Grade 1 Grade 2 Grade 3 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms HIGH-BACK (H) Grade 1 Grade 2 Grade 3 No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Seat Depth (S) is specified add 56 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4 CAL-TB133 flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

18 Standard pneumatic cylinder provides height adjustment of 8" travel Swivels 360 Frame, five star base and outer back are plastic casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the N S A D Savera Swivel Stool Size F Mid- Mechanism Arm W 2D Height- & Width-Adj. T-Arms Q 4D Width-, Height- & Depth- Adjustable T-Arms with Pivoting Arm Caps Seat (For Dual) Base E Ebony ~ Casters, A Casters, Soft B Glides, C Glides, Soft Other Options ~ Not Fully F Fully NSAD F 1 W P A E F COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms LA LB LC LD No Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4

19 N S A D J Savera Swivel Stool (CAL-TB133) Standard pneumatic cylinder provides height adjustment of 8" travel Swivels 360 Frame, base and outer back are Ebony plastic Includes 5-Star Polished Aluminum base casters are standard and are well suited for soft flooring such as carpeting Single : The same fabric is applied to the seat and inside back. Dual : Two different fabrics are applied to the chair, one fabric to the seat and the Size Mechanism Arm Base Other Options F Mid- W 2D Height- & Width-Adj. T-Arms Q 4D Width-, Height- & Depth- Adjustable T-Arms with Pivoting Arm Caps Seat (For Dual) C9 Polished Aluminum Base N Casters, A Casters, Soft B Glides, C Glides, Soft ~ Not Fully F Fully NSADJ F 1 W P A E F Grade 1 Grade 2 Grade 3 No Arms D Height & Width-Adjustable T-Arms D Width-, Height- & Depth-Adjustable T-Arms If Dual (D) is specified add 171 If Soft Casters (A) are specified add 18 If Glides (B) are specified add 18 If Soft Glides (C) are specified add 29 If Fully (F) is specified add 4 CAL-TB133 flammability test procedure established by the State of California for seating furniture that is used in public occupancies.