Teknion. task chairs. price & user guide

Transcription

1 Teknion task chairs price & user guide

2

3 P R I C E & P RO D U C T G U I D E FA B R I C S

4

5 contents M I N A S TA N D A R D M I N A VA L U E I N C E N T I V E K RY S TA L A M I C U S P RO J E K S AV E R A N A M I V O L U M E

6

7 mina standard overview Mina Standard is an elegantly designed seating that offers flexibility at an affordable price. Executive Chair with Front Multi Limited Tilt is shown Ebony and Polished Aluminum base available 5 5 No headrest Front and back arm pad 5 Outer Back is Plastic Angle between seat and back of 110 Independent Arm Height Adjustment of 75mm 5 5 Synchro Tilt locking Seat Depth Adjustment of 63mm 5 Five Star Base 3 position lock 5 Hard Casters are standard

8 mina standard dimensions Mina Standard Mesh Chair without Lumbar Mina Standard Mesh Chair with Lumbar

9 mina standard dimensions (continued) Mina Standard Fabric Chair

10 mina standard adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT BACK TILT ADJUSTMENT The Seat height paddle is located underneath the seat on the right side. To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place. To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place. To adjust the seat depth, lift lever up and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release lever to lock the seat in place. The tilt lock paddle is located underneath the seat on the left side To adjust the angle of reclination, push the lever forward to unlock the back and leave the chair in free-flow mode. Recline to the desired position and push the lever backward to lock the back in place. 8 ARM ADJUSTMENT To adjust the arm height, lift up the button on the side of the arm and raise or lower to the desired position. Release the button to lock in place. Arm pad can be pushed front and back according to individual comfort

11 mina standard material requirements COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back Mesh 0.5 n/a n/a n/a Mid-Back Fabric Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. PACKING METHODS KD (Knock Down) One (1) chair per carton mina standard weight & volumes CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 40' GP HC inchesh inchesw inchesd kgs Mid-Back Mesh Mid-Back Fabric

12 K L N M S Mina Standard Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 100mm Seat depth adjustment of 63mm Back-tilt can be locked at 4 positions or left free flow Height adjustment arm with pivoting arm cap Tension control 10 NOTES Chair comes in a CKD (complete knock down) unit. Lumbar option is only available for Mesh Back PRODUCT OPTIONS Size F Mid Back Mechanism Style 1 Standard Arm Style N No Arms H Height Adjustable T-Arm M Mesh U Upholstery Back Style Mesh Fabric Leather Upholstery Back Finish SAMPLE ORDER CODE KLNMS F 1 H M SP PRODUCT OPTIONS CONTINUED Upholstery Cylinder Style Seat Finish Fabric 1 Standard Leather Lumbar Support N No Lumbar Support Y Lumbar Support Base Finish E Ebony Nylon Base C Polished Aluminum Base Casters A Soft Casters Y Hard Casters SAMPLE ORDER CODE CONTINUED X720 1 N E A See pricing on following page

13 K L N M S Mina Standard Task Chair (Continued) DESCRIPTION MESH BACK (M) PRICE COM/ COL/ Leather LA/ Grade AA Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Height-Adjustable T-Arms UPHOLSTERY BACK (H) No Arms Height-Adjustable T-Arms If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Lumbar Support (Y) is specified add

14 mina value overview Mina Value is an elegantly designed seating that offers flexibility at an affordable price. 12 Mina Value chair with synchro-tilt, 4 is shown No headrest Front and back arm pad 12 Outer Back is Plastic Angle between seat and back of 110 Independent Arm Height Adjustment of 75mm Synchro Tilt locking 12 Five Star Base 12 Hard Casters are standard

15 mina value dimensions Mina Value Mesh Chair Mina Value Fabric Chair

16 mina value adjustment features & instructions SEAT HEIGHT ADJUSTMENT TENSION ADJUSTMENT ARM HEIGHT ADJUSTMENT The Seat height paddle is located underneath the seat on the right side. To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place. To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place. Tension knob is located underneath the seat in the middle. Leaning back, determine if the resistance of the chair is comfortable. For less resistance, turn adjustment knob clockwise. For greater resistance, turn the knob counterclockwise To adjust the arm height, lift up the button on the side of the arm and raise or lower to the desired position. Release the button to lock in place. Arm pad can be pushed front and back according to individual comfort. 14 BACK TILT ADJUSTMENT The tilt lock paddle is located underneath the seat on the right side. To adjust the angle of reclination, push the lever forward to unlock the back and leave the chair in free-flow mode. Recline to the desired position and push the lever backward to lock the back in place

17 mina value material requirements COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back Mesh 1 n/a n/a Mid-Back Fabric 1 n/a 0.5 n/a mina value weight & volumes 15 Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice PACKING METHODS KD (Knock Down) One (1) chair per carton CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 40' GP HC inchesh inchesw inchesd kgs Mid-Back Mesh Mid-Back Fabric

18 K L N M V Mina Value Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 100mm Back-tilt can be locked at 1 position upright or left free flow Height adjustment arm with pivoting arm cap Tension control 16 NOTES Chair comes in a CKD (complete knock down) unit. Lumbar option is only available for Mesh Back PRODUCT OPTIONS Size F Mid Back Mechanism Style 1 Standard Arm Style N No Arms H Height Adjustable T-Arm M Mesh U Upholstery Back Style Mesh Fabric Upholstery Back Finish SAMPLE ORDER CODE KLNMV F 1 H M SP PRODUCT OPTIONS CONTINUED Upholstery Cylinder Style Seat Finish Fabric 1 Standard Lumbar Support N No Lumbar Support Y Lumbar Support Base Finish E Ebony Nylon Base Casters A Soft Casters Y Hard Casters SAMPLE ORDER CODE CONTINUED X720 1 N E A See pricing on following page

19 K L N M V Mina Value Task Chair (Continued) DESCRIPTION MESH BACK (M) PRICE COM/ COL/ Grade AA Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Height-Adjustable T-Arms UPHOLSTERY BACK (H) No Arms Height-Adjustable T-Arms If Soft Casters (A) are specified add 15 If Lumbar Support (Y) is specified add

20 incentive overview Incentive is a comfortable, high quality chair that provides simple, yet effective ergonomic seating. 18 Incentive Task Executive chair with synchro-tilt, 5 shown Pivoting Arm Cap 30 inwards Independent Arm Height Adjustment of 79mm 18 Back is fabric or Leather Standard Seat Height-Adjustment of 99mm 18 Synchro Tilt Locking 18 Arm Width Adjustment of 25-51mm Tension Control Seat Depth Adjustment of 51mm 18 5-Star Base 18 Hard Casters are standard Statement of Line High Back T-Arms High Back T-Arms High Back No Arms 18

21 incentive dimensions & material requirements Dimensions Width Between Arm Before Expand Armrest 460mm After Expand Armrest 505mm 19 Overall Height From Floor High Back Standard Synchron 1 locking 1035mm with Seat Sliding Epron DA with Seat Sliding 1035mm Epron Flex with Seat Sliding 1035mm High Back Standard Synchron 1 locking 925mm with Seat Sliding Epron DA with Seat Sliding 925mm Epron Flex with Seat Sliding 925mm Back Height From Seat High Back 570mm without Sliding 590mm After Back Height Adjust 640mm without Sliding 660mm Mid Back 460mm without Sliding 480mm After Back Height Adjust 530mm without Sliding 570mm Seat Height Standard Synchron mm with Sliding mm without Sliding Epron DA mm with Sliding mm without Sliding Epron Flex mm with Sliding mm without Sliding Functional Seat Depth Before Sliding 415mm After Sliding 465mm Seat Width High Back 490mm Mid Back 490mm 19 Overall Depth Teknion Chair Base 645mm Overall Width Before Expand Armrest 665mm After Expand Armrest 715mm COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back Mid-Back

22 incentive adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT BACK HEIGHT ADJUSTMENT The seat height-adjustment paddle is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backwards. Release the lever to lock the seat in place. The back height adjustment is activated by the chair s back. To adjust the lumber height, lean forward and grasp both sides of the lower portion of the outside back. To raise, slide the back up. To lower, slide the back all the way to the top and then lower to desired height. Release to lock in place. ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT SYNCHRO TILT To adjust the arm height, press the button in and move the arm up or down to the desired height. Release the button to lock in place. To adjust width of each arm, push the lever down and slide the arm to the desired position. Push the lever up to lock the arm in place. The tilt control paddle on the left locks the chair into four different positions. To tilt the chair, sit in the chair and unlock the paddle by pushing it down, which will release the back to free flow. To lock in position, pull the paddle up and the back will lock in position

23 incentive weight & volumes Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. 21 PACKING METHODS CKD (Complete Knock Down) One (1) chair per carton CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 20' GP mmh mmw mmd lbs Mid-Back High-Back

24 22 22 K L N K Incentive Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 99mm Seat depth adjustment of 51mm Back-tilt can be locked at 5 positions or left free flow Back lumbar adjustment at 57mm Height, width and depth adjustment arm with pivoting arm cap Tension control NOTES Single Upholstery: The same fabric is applied to the seat and inside back. Dual Upholstery: Two different fabrics are applied to the chair, one fabric to the seat and the other fabrics to the back. First fabric listed will apply to the back and is the grade of fabric used to price the chair. A dual upholstery upcharge applies. Chair comes in CKD (complete knock down) unit, unless otherwise specified. Chair with recliner synchro mechanism has one position locking without lumbar adjustment PRODUCT OPTIONS Size F Mid Back H High Back Mechanism Style 1 Synchro 5 Locking Position 2 Synchro 5 Locking Position with Forward Tilt 3 Recliner Synchro 1 Locking N No Arms Arm Style H Height Adjustable T-Arm W Height & Width Adjustable T-Arm Upholstery Style P Single D Dual Fabric Leather Upholstery Back Finish Fabric Leather Upholstery Seat Finish 22 SAMPLE ORDER CODE KLNK F 1 H D X721 X PRODUCT OPTIONS CONTINUED Seat Depth Adjustment Cylinder Style Base Finish Casters Assembly Style 22 N No Seat Depth Adjustment S With Seat Depth Adjustment 1 Standard 2 High 3 Low E Ebony Nylon Base C Polished Aluminum A Soft Casters Y Hard Casters N CKD (complete knock-down) F Full Assemble SAMPLE ORDER CODE CONTINUED S 1 E Y N See pricing on following page

25 K L N K Incentive Task Chair (Continued) DESCRIPTION SINGLE UPHOLSTERY (P) MID BACK (F) SYNCHRO 5 LOCKING POSITION (1) PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms RECLINER SYNCHRO 1 LOCKING (3) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms UPHOLSTERY BACK (H) SYNCHRO 5 LOCKING POSITION (1) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms RECLINER SYNCHRO 1 LOCKING (3) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms If Seat Depth Adjustment (S) Base is specified add 30 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Full Assemble (F) is specified add 12 Pricing is continued on the following pages

26 K L N K Incentive Task Chair (Continued) DESCRIPTION DUAL UPHOLSTERY (D) MID BACK (F) SYNCHRO 5 LOCKING POSITION (1) PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms RECLINER SYNCHRO 1 LOCKING (3) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms UPHOLSTERY BACK (H) SYNCHRO 5 LOCKING POSITION (1) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms RECLINER SYNCHRO 1 LOCKING (3) No Arms Height Adjustable T-Arms Height & Width Adjustable T-Arms If Seat Depth Adjustment (S) Base is specified add 30 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Full Assemble (F) is specified add

27

28 krystal overview Krystal is an elegantly designed seating that offers flexibility at a affordable price. 26 Executive Chair with Front Multi Limited Tilt is shown. Ebony and Polished Aluminum base available Height & Angle Adjustment Headrest Free Rotating Arm Pad Independent Arm Height Adjustment of 61mm 26 Outer Back is Plastic Angle between Seat and Back of Synchro Tilt Locking Seat Depth Adjustment of 51mm Front Multi Limited Tilt 26 Five Star Base Hard Caster are standard Statement of Line Mid Back T-Arms Mid Back No Arms High Back T-Arms 26

29 krystal dimensions & material requirements Dimensions Width Between Arms 488mm Back Width 503 Headrest Height from Back mm Angle Between Seat & Back 103 Back Height from Seat 584mm Arm Height from Floor mm Back Height from Floor mm Seat Height from Floor mm Functional Seat Width 480mm Functional Seat Depth mm COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back n/a n/a 1 14 High-Back n/a n/a

30 krystal adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT BACK HEIGHT ADJUSTMENT The seat height-adjustment paddle is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. To adjust the seat depth, depress button and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release button to lock the seat in place. Leaning back, decide if the resistance of the chair is comfortable. If it is too stiff, pull the tensionadjustment knob out and turn in clockwise. If the chair does not provide enough resistance, turn the knob counterclockwise. ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT SYNCHRO TILT To adjust the arm height, press the button in and move the arm up or down to the desired height. Release the button to lock in place. To adjust the headrest height, raise or lower the headrest to the desired height. The back tilt adjustment paddle is located underneath the seat on the left side. The back tilt adjustment provides the ability to lock the back into four different positions or leave in three-flow. To tilt the chair, sit in the chair and unlock the paddle by pulling it up, which will release the back to free flow. To lock the desired position, push the paddle down and the back will lock

31 krystal weight & volumes Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. 29 PACKING METHODS CKD (Complete Knock Down) One (1) chair per carton CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 20' GP mmh mmw mmd lbs Mid-Back High-Back

32 K L N F Krystal Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 102mm Seat depth adjustment of 51mm Front multi limited tilt provides 3 titling angles Height adjustment arm with pivoting arm cap Tension control NOTES Chair comes in CKD (complete knock down) unit, unless otherwise specified. Headrest upholstery in black vinyl. Lumbar is pre-fixed on Krystal Chair and cannot be ordered as a separate component. 30 PRODUCT OPTIONS Size Mechanism Style Arm Style Upholstery Back Finish Upholstery Seat Finish 30 F Mid Back H High Back 1 Standard N No Arms H Height Adjustable T-Arm F402 Black Crystal Fabric Leather SAMPLE ORDER CODE KLNF F 1 H F402 X PRODUCT OPTIONS CONTINUED Cylinder Style Lumbar Support Base Finish Casters Assembly Style 30 1 Standard 2 High 3 Low N No Lumbar Support Y Lumbar Support E Ebony C Polished Aluminum A Soft Casters Y Hard Casters N CKD (complete knock-down) F Full Assemble SAMPLE ORDER CODE CONTINUED 1 Y E Y N See pricing on following page

33 K L N F Krystal Task Chair (Continued) DESCRIPTION MID BACK (F) PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Height Adjustable T-Arms HIGH BACK (H) No Arms Height Adjustable T-Arms If Lumbar Support is specified add 27 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Full Assembly (F) is specified add

34

35 amicus dimensions & material requirements Dimensions For Conversion to Metric, multiply dimension by Guest Cantilever Guest Four-Leg WEIGHT 20 lbs 20 lbs 33 Backrest Width 19" 33 Cantilever Arm Height from Seat 8" Lumbar Apex Height General Use 9" Overall Height (Standard Cylinder) 31" Back Height from Seat 15 1/2" Angle between Seat and Back 97 Seat Height Guest Four-Leg 17" Guest Cantilever 18" Arm Height from Floor 25 3/4" Seat Width 20 1/4" Overall Width 24" Seat Depth 17 1/4" Overall Depth 22" COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. SINGLE UPHOLSTERED DUAL UPHOLSTERED SEAT DUAL UPHOLSTERED BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft] Guest Chairs Seat only 1 8 1/2 n/a n/a n/a n/a Guest Chairs Seat and Back /2 n/a n/a n/a n/a

36 34 N A M G Amicus Guest Chair FEATURES Outer back and arms are plastic and finished in Ebony Multi-surface glides are standard when the Cantilever or Four-Leg frame style is specified Hard casters are standard when the Four-Leg with Casters frame style is specified. Soft casters may be ordered as an option NOTES When plastic back style is specified only the seat will be upholstered. When upholstered pad on plastic back is specified both the seat and inside back will be upholstered Four-Leg with Glides PRODUCT OPTIONS Size Frame Style D Low-Back Cantilever with Glides C Cantilever with Glides F Four-Leg with Glides (Shown) G Four-Leg with Casters Arm Style N No Arms K Integrated Arms Upholstery/Back Style Z Plastic U Upholstered Pad on Plastic Back Upholstery Finish Fabric Leather Frame Finish E Ebony C Chrome K Mica Silver Casters/Glides (Optional) A Casters, Soft (For G frame style) D Glides (For C & F frame style) 34 SAMPLE ORDER CODE NAMG D C K Z K 34 DESCRIPTION WITHOUT CASTERS PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 Leather LA FOUR-LEG (F) PLASTIC BACK (Z) No Arms Integrated Arms FOUR-LEG (F) UPHOLSTERED BACK (U) No Arms Integrated Arms CANTILEVER (C) PLASTIC BACK (Z) No Arms Integrated Arms CANTILEVER (C) UPHOLSTERED BACK (U) No Arms Integrated Arms If Mica is specified add 54 If Chrome Frame (C) is specified add 54 If Soft Casters (A) are specified add

37 N A M G Amicus Guest Chair (Continued) DESCRIPTION WITH CASTERS PRICE 35 COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 Leather LA FOUR-LEG (G) PLASTIC BACK (Z) No Arms Integrated Arms FOUR-LEG (G) UPHOLSTERED BACK (U) No Arms Integrated Arms If Mica is specified add 54 If Chrome Frame (C) is specified add 54 If Soft Casters (A) are specified add

38 projek overview Projek is a chair for all people and environments Projek chairs have been designed and tested for users weighing up to 300 lbs Projek chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection Synchro-tilt weight-balancing with 3.5:1 ratio Optional fixed headrest Shrinx Mesh 3D Pivoting Arm Caps pivot 180 (with auto safety lock) Lumbar Apex Adjustment of 102mm Seat Depth Adjustment of 76mm Weight Balancing Synchro-Tilt Motion Tilt Limiter / Back Lock Plastic or Aluminum Five Star Base Arm Height Adjustment Seat Height Adjustment of 102mm Tension Control Arm Width Adjustment 60mm hard casters are standard Statement of Line

39 projek finish guide When selecting finishes for the Inner and Outer Frame, Lumbar and Mesh of the Projek family of chairs, Task chair and Swivel Stool, it is possible to select different finishes for the components listed below or to have the same finish specified throughout. Task Chair and Stool: The headrest's frame and fabric finishes default to the Outer Frame Finish and Seat Fabric Finish (Assembled Task Chair and Stool only) Arm finish defaults to Outer Frame Finish. For Stone Arm Finish, major finish is Stone, Arm Rest Pad and Arm Support in Ebony Guest Chair: Lumbar Element not included Arm Rest in Ebony only Shrinx Mesh Back 37 Plastic Lumbar Element Arm Rest Pad 37 Arm Rest 37 Plastic Inner Frame Plastic Outer Frame Arm Support

40 projek dimensions & material requirements Dimensions WEIGHT 38 Width Between Arms 2D mm 3D mm General Use/Executive Task Swivel Stool 35 lbs 41.8 lbs 38 Back Width 457mm Headrest 184mm 38 Lumber Apex Height mm Angle between Seat and Back Task Swivel Stool Arm Height from Seat 2D mm 3D mm Back Height from Seat 575mm Overall Height Task mm Swivel Stool mm Seat Height from Floor Task Standard mm Task High mm Task Low mm Swivel Stool mm Seat Width 514mm Overall Width 743mm Overall Depth 743mm Seat Depth mm COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. DUAL UPHOLSTERED COM COL [yards] [sq. ft] Seat 7/8 8 3/4 Headrest 1/2 4 7/8 38

41 projek adjustment features & instruction SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT 3D ARM PIVOT ADJUSTMENT 39 Seat height can be adjusted by pulling outward on the button below the seat on the right hand side. When this lever is pulled, the weight of the body will cause the seat to lower, and releasing it stops the seat at the desired height. Pulling outward on the button with no weight on the seat allows it to rise. To adjust the seat depth, pull outward on the button below the seat on the left-hand side and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release button to lock the seat in place. To pivot the arm cap, depress the auto safety lock button on the outside of the armrest and pivot 180 degrees to desired position. Release the button to lock in place ARM HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT To adjust the arm height, press the button below either arm rest to raise or lower it to the desired position. Release the button to lock in place. Turning the grip found under the left side of the seat limits the back tilt travel and locks the back. Travel is limited on 3 positions with back lock in the upright position. Fine tune the weight balanced tension by rotating the dial located below the seat centre to suit personal preference. 39 LUMBAR HEIGHT-ADJUSTMENT ARM WIDTH ADJUSTMENT STOOL FOOT RING HEIGHT The lumbar height-adjustment knobs can be found on the back where the Inner Frame connects to the Lumbar Element. The height of the lumbar support can be adjusted by sliding them up and down. To adjust the width of each arm, turn the dial clockwise to release the arm lock. Slide the arm inward or outward to the desired position. Tighten the knob to lock the arm in place. To raise or lower the stool s foot ring, turn the foot ring s knob counter clockwise to release the foot ring and adjust the ring until you reach the desired level. Turn the knob clockwise to lock in place

42 N P R T Projek Synchro-Tilt Task Chair 2D Arm 3D Arm FEATURES Standard pneumatic cylinder provides height adjustment of 102mm Seat depth adjustment of 76mm Lumbar height adjustment of 102mm Back tilt can be locked in the upright position or left to free flow to 3 defined angle ranges Weight-balancing with a travel limiter synchro-tilt mechanism (3.5:1 tilt ratio) with unique preference control to tilt tension. Back recline angle range is 0-20 and seat adjustment range angle is Ebony base is available in plastic only Hard casters are well suited for soft flooring such as carpeting Soft casters are available for use on hard flooring, such as wood, concrete or tile Headrest option is only available on Fully Assembled style NOTES Headrest's frame and fabric finishes default to Outer Frame Finish and Seat fabric finish. Arm finish to match Outer Frame Finish. For Stone Arm Finish, major Finish is Stone with Arm Rest Pad and Arm Post Support in Ebony. Projek chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion s Standard and Graded-In-Fabrics on seat. See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame & Lumbar Element finish details PRODUCT OPTIONS Headrest N No Headrest Arm Style N No Arms F Fixed T-Arms W 2D Width- & Height-Adjustable T-Arms P 3D Width- & Height-Adjustable T-Arms with Pivot Arm Cap Shrinx Mesh Back S2 Ebony Seat Upholstery Finish Fabric Cylinder Style 1 Standard 2 High 3 Low Plastic Outer Frame Finish 8B Ebony 40 SAMPLE ORDER CODE NPRT N P S2 X B 40 PRODUCT OPTIONS CONTINUED B Ebony Plastic Inner Frame Finish 8B Plastic Lumbar Element Finish Ebony Base Finish 52 Ebony C9 Polished Aluminum Casters/Glides A Casters, Soft B Glides, Hard C Glides, Soft Y Casters, Hard Assembly Style N Not Fully Assembled 40 SAMPLE ORDER CODE CONTINUED 8B 8B 52 Y N See pricing on following page

43 N P R T Projek Synchro-Tilt Task Chair (Continued) DESCRIPTION PRICE COM/ Grade 1 Grade 2 COL Grade 4 Grade 5 Grade 9 Leather LA NO HEADREST (N) No Arms Fixed Arms D Width, Height-Adjustable T-Arms D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap If Polished Aluminum (C9) Base is specified add 45 If Soft Casters (A) are specified add 16 If Hard Glides (B) are specified add 16 If Soft Glides (C) are specified add

44

45 savera overview Savera, classic form with comfort and performance at an exceptionally affordable price. Savera chairs have been designed and tested for users weighing up to 275 lbs (Swivel Tilt Task and Stool), 300 lbs (Synchro-tilt Task), 350 lbs (Guest) and 400 lbs (Savera XL) Savera chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection Task Chair with Synchro-tilt shown Outer Back is Plastic Lumbar Apex Height Adjustment of 70mm 43 Clearance between armrests: 521 or 584mm Arm Height Adjustment 2D 102mm 4D 121mm 43 Standard Seat Height Adjustment of 102mm 43 Tension Control Back-Tilt (Not shown) Seat Depth Adjustment of 51mm Total Arm Width Adjustment 2D 38mm 4D 102mm Five Star Base 60mm Heavy Duty Synchro-Tilt Mechanism Tension Control SAVERA XL Seat Height Adjustment of 102mm 60mm Hard Casters are standard Heavy Duty Five Star Base Statement of Line Mid-Back No Arms Mid-Back Fixed T-Arms Mid-Back 2D Arms High-Back No Arms High-Back Fixed T-Arms High-Back 2D Arms 43

46 savera dimensions & material requirements Dimensions WEIGHT 44 General Use/Task Stool Executive/XL 40 lbs 41 lbs 64 lbs 44 Width Between Arms Fixed T-Arms 483mm 2D mm 44 Back Width Task 432mm Arm Height from Seat Fixed T-Arms 197mm 2D mm Lumbar Apex Height Task mm Back Height from Seat Task Mid-Back 508mm Task High-Back 660mm Angle between Seat and Back Task Overall Height Task Mid-Back 800mm Task High-Back 902mm Seat Height from Floor Task Standard mm Task High mm Task Low mm Seat Width Task 451mm Overall Width Task 762mm Overall Depth Task 762mm Seat Depth Task mm General Use 432mm COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. SINGLE UPHOLSTERED DUAL UPHOLSTERED SEAT DUAL UPHOLSTERED BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft] Mid-Back /4 4 High-Back / /2 44

47 savera adjustment features & instructions BACK TILT ADJUSTMENT TENSION CONTROL LUMBAR HEIGHT ADJUSTMENT SYNCHRO-TILT TASK: The tilt control paddle on the left locks the chair into four different positions. To tilt the chair, sit in the chair and unlock the paddle by pushing it down, which will release the back to free flow. To lock in position, pull the paddle up and the back will lock in position. SYNCHRO-TILT TASK: The tension-adjustment wheel for the synchro tilt Task chair is located on the right. Leaning back, decide if the resistance of the chair is comfortable. If it is too stiff, turn the tension adjustment knob counter-clockwise. If the chair back does not provide enough resistance, turn the knob clockwise. The lumbar height-adjustment levers for Savera Synchro-Tilt are found at the sides of the chair. Pull levers up or down to the desired position. 45 SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT ARM WIDTH ADJUSTMENT The seat height-adjustment paddle for Savera Synchro-Tilt is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the lever to lock the seat in place. To adjust the arm width on Savera Synchro-Tilt push the lever down and slide the arm to the desired postition. Push the lever up to lock the arm in place ARM HEIGHT ADJUSTMENT D ARMS: To adjust the arm height on Savera Synchro-Tilt lift the small button on the outside of either arm to raise or lower it to the desired position

48 46 46 N S A Y Savera Synchro-Tilt Task Chair 2D Arm 4D Arm Fixed T-Arm FEATURES Standard pneumatic cylinder provides height adjustment of 102mm Seat depth adjustment of 51mm Lumbar height adjustment of 70mm Back-tilt can be locked in four positions or left free flow Frame, five star base and outerback are plastic Synchro-tilt 3:1 ratio Tension control Hard casters are standard and are well suited for soft flooring such as carpeting Soft casters are available for use on hard flooring, such as wood, concrete, or tile NOTES Single Upholstered: The same fabric is applied to the seat and inside back. Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat and the other fabric to the inside back. First fabric listed will apply to the back and is the grade of fabric used to price the chair. A dual upholstery upcharge applies PRODUCT OPTIONS Size F Mid-Back H High-Back Mechanism Style 1 Standard Arm Style N No Arms F Fixed T-Arms W 2D Height & Width-Adj. T-Arms Upholstery Style P Single Upholstered D Dual Upholstered Back Upholstery Finish Fabric Leather Fabric Leather Seat Upholstery Finish (For Dual) SAMPLE ORDER CODE NSAY F 1 W P X PRODUCT OPTIONS CONTINUED Seat Depth Adjustment N No Seat Depth Adjustment S With Seat Depth Adjustment 1 Standard 2 High 3 Low Cylinder Style Frame & Base Finish E Ebony Casters/Glides (Optional) Y Casters, Hard A Casters, Soft B Glides, Hard C Glides, Soft Other Options N Not Fully Assembled F Fully Assembled SAMPLE ORDER CODE CONTINUED S 1 E Y N See pricing on following page

49 N S A Y Savera Synchro-Tilt Task Chair (Continued) DESCRIPTION PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 MID-BACK (F) No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms HIGH-BACK (H) No Arms Fixed T-Arms D Height & Width-Adjustable T-Arms If Dual Upholstered (D) is specified add 165 If Seat Depth Adjustment (S) is specified add 54 If Soft Casters (A) are specified add 17 If Hard Glides (B) are specified add 17 If Soft Glides (C) are specified add 28 If Fully Assembled (F) is specified add

50 nami overview Overview Nami chairs have been designed and tested for users weighing up to 250 lbs One Piece Shell 48 Integrated Arms Cantilever Frame Ebony or Chrome Finish Statement of Line Stacking Guest Chair Cantilever Frame No Arms Stacking Guest Chair Cantilever Frame Integrated Arms with Bookrack * Ganging Device and Dolly also available with Tablet * Ganging Device and Dolly also available

51 nami dimensions Dimensions WEIGHT Bar Stool 20 lbs Counter Stool 19 lbs Chair 17 lbs 49 Width Between Arms 508mm 49 Back Width 406mm Seat Depth 413mm Angle between Seat and Back Guest Chair Lumbar Apex Height 229mm Back Height from Seat 356mm Seat Height from Floor Counter 610mm Arm Height from Floor 635mm Seat Width 432mm Overall Height 813mm Seat Height from Floor Chair 457mm Overall Width (Chair & Stools) With Integrated Arms 584mm No Arms 521mm With Tablet 635mm Overall Depth (Chair & Stools) 559mm With Tablet 572mm With Tablet Extended 762mm 49 Other Dimensions Dolly Dimensions x 102cm d x 130cm h x 64cm w Dolly Dimensions with 20 stacked chairs 102mm d x 188cm h x 64cm w Tablet Dimensions 45cm d x 43cm w Bookrack Dimensions 40cm d 25cm x 30cm w

52 50 50 N N A C Nami Stacking Guest Chair FEATURES Stacks 20 high on the dolly Stacks 8 high on the floor Ganging device can gang any combination of arm option (including tablet arm) Multi-surface glides NOTES Tablet can only be specified on chairs with arms. Tablet is standard on the right and finished in Ebony. When Tablet is specified, chair is no longer stackable. When With Ganging (G) is selected, a ganging device is included to connect two chairs. 50 PRODUCT OPTIONS Frame Style Arm Style Frame Finish Shell Finish Tablet Option (If Applicable) Other Options C Sled N No Arms K Integrated Arms with Caps (Shown) 52 Ebony C6 Chrome 7F Ebony 7P Lunar Grey 7A Fearless Red 7Y Storm White 6D Dark Taupe 7H Light Grey 7K Deep Ocean N No Tablet (Shown) T With Tablet N No Ganging G With Ganging 50 SAMPLE ORDER CODE NNAC C K 52 7F N G 50 DESCRIPTION PRICE No Arms 294 Integrated Arms 396 If Chrome Finish (C6) is specified add 91 If Tablet (T) is specified add 158 If Ganging Device (G) is specified add

53 FEATURES Ganging Device can gang any combination of arm option (including tablet arm) Hard casters are standard on the Dolly NOTES The Ganging Device is used to attach two Nami Stacking Chairs (NNAC) that were not previously ordered with the Ganging option. Bookrack must be field installed. Tablet is finished in Ebony. N N A Nami Chair Accessories Dolly will hold 20 Nami Chairs (NNAC) without Tablet Arm. Dolly Bookrack 51 Tablet Ganging Device 51 PRODUCT OPTIONS Accessories Bookrack Finish (If applicable) 51 G Ganging Device B Bookrack T Tablet W Dolly 52 Ebony C6 Chrome SAMPLE ORDER CODE NNA B DESCRIPTION PRICE 51 Ganging Device 57 Bookrack 80 Tablet 158 Dolly

54 volume overview Overview Volume chairs have been designed and tested for users weighing up to 250 lbs Steel Frame 52 Plastic Glides Statement of Line Stacking Chair No Arms With Tablet (right-handed) With Tablet (left-handed) With Bookrack * Ganging Device, Upholstered Seat and Dolly also available With Tablet (right-handed) & Bookrack With Tablet (left-handed) & Bookrack 52

55 volume dimensions & material requirements Dimensions WEIGHT Chair 15 lbs 53 Back Width 46mm 53 Seat to Back Angle Lumbar Apex Height 22mm Overall Height 83mm Back Height from Seat 43mm Seat Height from Floor 48mm Seat Width 46mm Overall Width 50mm With tablet 58mm Seat Depth 43mm Overall Depth 55mm With tablet 70mm Other Dimensions Dolly Dimensions 102cm d x 64cm w x 89cm h Dolly Dimensions with 35 stacked plastic chairs or 25 stacked upholstered chairs 193cm h x 64cm w x 107cm d Tablet Dimensions 45cm d x 43cm w Bookrack Dimensions 30cm w x 36cm l COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. SEAT UPHOLSTERY COM COL [yards] [sq. ft] Medium 3/4 6 1/

56 54 N H D S Volume Stacking Chair FEATURES Non upholstered chairs stack 35 high on the dolly and 10 high on the floor Upholstered chairs stack 25 high on the dolly and 8 high on the floor NOTES When Tablet Arm is specified, chair is no longer stackable. When Bookrack is specified, chair is no longer stackable. Tablet surface is finished in Ebony and frame is finished in Chrome. Bookrack is finished in Chrome frame with Ebony plastic shelf details PRODUCT OPTIONS Arm Style Upholstered/Seat Style N No Arms U Upholstered N Not Upholstered Back Finish 7F Ebony 7Y Storm White 7E Espresso 7L Latte 6H Meduim Grey 7H Light Grey 7J Solar Yellow 7K Deep Ocean 7N Crimson Seat Finish 7F Ebony 7Y Storm White 7E Espresso 7L Latte 6H Meduim Grey 7H Light Grey 7J Solar Yellow 7K Deep Ocean 7N Crimson Upholstery Finish (If applicable) Fabric Frame Finish C Chrome Bookrack N No Bookrack B With Bookrack Tablet Arm N No Tablet Arm R With Tablet Arm (righthanded) L With Tablet Arm (lefthanded) SAMPLE ORDER CODE NHDS N U 7F 7E X720 C B R DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 Not Upholstered Seat 175 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Upholstered Seat n/a If Bookrack (B) is specified add 79 If Tablet Arm (R) or (L) is specified add

57 FEATURES Hard casters are standard on the Dolly NOTES Bookrack and Tablet Arm must be field installed. Dolly will hold 35 non upholstered Volume chairs (NHDS) without Tablet Arm or Bookrack. Dolly will hold 25 upholstered Volume chairs (NHDS) without Tablet Arm or Bookrack. Tablet surface is finished in Ebony and frame is finished in Chrome. Bookrack is finished in Chrome frame with Ebony plastic shelf details. Ganging Device ships in quantities of 10. N H D Volume Chair Accessories Dolly Bookrack PRODUCT OPTIONS Accessories Tablet (right or lefthanded) Ganging Device 55 B Bookrack G Ganging Device R Tablet (right-handed) L Tablet (left-handed) W Dolly (for non-upholstered chair) SAMPLE ORDER CODE NHD G 55 DESCRIPTION PRICE 55 Bookrack 79 Ganging Device (quantity: 10) 57 Tablet (right or left-handed) 136 Dolly

58

59 fabrics T E K N I O N FA B R I C S M A L AY S I A FA B R I C

60 fabrics T E K N I O N S T A N D A R D U P H O L S T E R Y F A B R I C S FUNDAMENTALS GRADE 1 Banner E505 Gris E531 Latte E535 Brier E518 Dove E532 Light Grey E522 Sudan E519 Vanilla E524 Verde E528 Nickel E533 Forsythia E525 Parakeet E516 Slate E534 Tangelo E526 Aqua E529 Armory E521 Salsa E504 Azure E530 Black E523 Fushia E527 Wendigo E520 ARIZONA GRADE 2 Tempe A120 Phoenix A101 Tucson A102 Espresso A118 Sedona A122 Chandler A121 Mesa A105 DURABLE (VINYL) Oxford V101 Pearl Grey V102 Charcoal V103 Black V104 Medium Neutral V105 Brown V106 Elephant V107 Burgundy Dark Blue Pine Mountain White Bisque Nu-Red Cadet White Sand Canary Sahara Spice Paprika Cocoa Casablanca Vineyard Tangier Atlantic Onyx MIAMI Aventura Liberty City Doral South Beach Downtown Boardwalk Pinecrest Dade Coral Gables Wynwood Homestead BEADED STRIPE Snapdragon-Beaded Vine-Beaded Espresso-Beaded Olive-Beaded Peacock-Beaded Pomegranate-Beaded Latte-Beaded V109 V110 V111 V125 V126 V127 V128 V150 V151 V152 V153 V154 V155 V156 V157 V158 V159 V160 M525 M526 M533 M529 M532 M531 M530 M524 M528 M522 M523 P490 P491 P492 P493 P494 P495 P496 DIAMOND TECH Blue Night-Tech Patina-Tech Bronze-Tech Espresso-Tech Fire-Tech Flame-Tech Ochre-Tech Danube-Tech Aspen-Tech Pool-Tech TEXTURED BAND ULTRA DURABLE (VINYL) Aristo - White Water Aristo - Sisal Aristo - Baked Pottery Aristo - Vapor Aristo - Nirvana Aristo - Tiger Eye Aristo - Laurel Aristo - Silhouette Vitality - Mohair Vitality - Vanilla Vitality - Iced Coffee Vitality - Hershey Vitality - Tungsten Vitality - Hot Spring Vitality - Parrot Vitality - Black Velvet Verve - Mist Verve - Cafe Verve - Chrome Verve - Polished Metal Verve - Jet Set P460 P461 P462 P463 P464 P465 P466 P467 P468 P469 V163 V164 V165 V166 V167 V168 V169 V170 V180 V181 V182 V183 V184 V185 V186 V187 V188 V189 V190 V191 V192 Coffee V108 58