How to Setup PureVPN on Tomato Router
|
|
- Samuel Bruce
- 3 years ago
- Views:
Transcription
1 How to Setup PureVPN on Tomato Router It is very easy to configure VPN on Tomato Router. The following guide will help you setup PureVPN on your Tomato router. Things to Consider: Before you begin, please make sure that: You have a working internet connection VPN Supported Router. Own a premium PureVPN account (If you do not already own one, you can buy a subscription from here) How to setup PPTP on Tomato Router 1 This image shows that how your VPN setup will look like. 1 / 16
2 2 Access your router control panel and click on Network under Basic option on the left panel. 2 / 16
3 3 In Connection Type select PPTP from drop down menu. 3 / 16
4 4 Type in your PureVPN Username and Password in respective fields as provided in your VPN credential . 4 / 16
5 5 Check DHCP and Use Default Gateway on Remote Network. 5 / 16
6 6 In Subnet Mask type / 16
7 7 In PPTP Gateway field Insert your desired server address Click here to get server list 7 / 16
8 8 Leave Option field blank and in Connect Mode choose Keep Alive from drop down menu. Also, Set Check Interval to 30 seconds. 8 / 16
9 9 Set MTU to Default 9 / 16
10 10 Keep your LAN and Wireless settings to default settings. 10 / 16
11 11 Now, scroll down to the bottom of the page and click on Save. You Are Done! 11 / 16
12 How to setup OpenVPN on Tomato Router 1 Go to the Control Panel and select VPN Tunneling. Click on OpenVPN Client and select Client 1 to enter the following details under the Basic Tab : First Select the option Start with Wan From Drop Down in Interface Type select TUN In Protocol Drop down, select UDP 12 / 16
13 To fill the Server Address Details, open the downloaded.ovpn file on notepad, copy the address of your desired server and paste it in the field Insert 53 for UDP in the port field Select Automatic in firewall Select TLS in Authorization Mode Select on Username / Password Authentication Enter your Username and Password provided to you by PureVPN Uncheck the Username Authen. Only Select Outgoing (1) in the drop down of Extra HMAC authorization (tls-auth-) Check Create NAT on tunnel Note: For TCP port, you need to change the port from UDP to TCP and select 80 instead 53 in the port field. 2 Go to Advance Tab and do as follows: Enter 0 in the field Poll Interval Uncheck Redirect Internet Traffic Select Relaxed in the drop down of Accept DNS Configuration Select AES-256-CBC in the drop down of Encryption Cipher Select Adaptive in Compression 13 / 16
14 Enter -1 in TLS Renegotiation Enter 30 in Connection Retry Uncheck the option Verify server certificate (tls-remote) 3 Go to the tab titled Keys and do as follows: For Static Key, open the WDC.key in a notepad, copy all content and paste the content in the field. For Certificate Authority, open CA.crt in a notepad, copy all its content and paste the content in the field. For Client Certificate, open Client.crt in a notepad, copy all of the content and paste the content in the field. For Certificate Key, open Client.key in a notepad, copy all its content and paste the content in the field. 14 / 16
15 4 Click on the Save button and then click on the Start Now button. After a few seconds, your VPN connection will be established. You can verify the VPN connection status by clicking on the Status Tab. 15 / 16
16 Powered by TCPDF ( 16 / 16
PPTP Server Access Through The
PPTP Server Access Through The Firewall On The SureConnect 9003 DSLAM ATM Network ISP Internet PPTP Server Private IP: 192.168.1.3 Mask: 255.255.255.0 Default Gateway: 192.168.1.1 SureConnect 9003 Ethernet
More informationOverview. Author: Seth Scardefield Updated 11/11/2013
Author: Seth Scardefield Updated 11/11/2013 Yealink IP Phone OpenVPN Guide This guide will walk you through configuring an OpenVPN server instance in pfsense to allow Yealink IP Phones (T26P, T28P, T32G,
More informationUse Shrew Soft VPN Client to connect with IPSec VPN Server on RV130 and RV130W
Article ID: 5037 Use Shrew Soft VPN Client to connect with IPSec VPN Server on RV130 and RV130W Objective IPSec VPN (Virtual Private Network) enables you to securely obtain remote resources by establishing
More informationNAS 323 Using Your NAS as a VPN Server
NAS 323 Using Your NAS as a VPN Server Use your NAS as a VPN Server and connect to it using Windows and Mac A S U S T O R C O L L E G E COURSE OBJECTIVES Upon completion of this course you should be able
More informationHow to Setup PPTP VPN Between a Windows PPTP Client and the DIR-130.
Note: DIR-130 FW: 1.21 How to Setup PPTP VPN Between a Windows PPTP Client and the DIR-130. This setup example uses the following network settings: D-Link Technical Support PPTP VPN Between Windows PPTP
More informationASUS WL-5XX Series Wireless Router Internet Configuration. User s Guide
ASUS WL-5XX Series Wireless Router Internet Configuration User s Guide Contents Chapter 1 Introduction:...1 Chapter 2 Connecting the wireless router...1 Chapter 3 Getting to know your Internet connection
More informationDSL-G604T Install Guides
Internet connection with NAT...2 Internet connection with No NAT, IP Un-number...6 Port Forwarding...12 Filtering & Firewall Setup...20 Access Control... 21 DMZ Setup... 26 Allow Incoming Ping... 27 How
More informationUse the below instructions to configure your wireless settings to connect to the secure wireless network using Microsoft Windows Vista/7.
Use the below instructions to configure your wireless settings to connect to the secure wireless network using Microsoft Windows Vista/7. 1. Click the Windows Start button, then Control Panel How-To-WCC-Secure-Windows-7-11/4/2010-4:09
More informationHow to setup PPTP VPN connection with DI-804HV or DI-808HV using Windows PPTP client
How to setup PPTP VPN connection with DI-804HV or DI-808HV using Windows PPTP client Make sure your DI-804HV or DI-808HV is running firmware ver.1.40 August 12 or later. You can check firmware version
More informationHow to configure VPN function on TP-LINK Routers
How to configure VPN function on TP-LINK Routers 1. VPN Overview... 2 2. How to configure LAN-to-LAN IPsec VPN on TP-LINK Router... 3 3. How to configure GreenBow IPsec VPN Client with a TP-LINK VPN Router...
More informationEstablishing a VPN tunnel to CNet CWR-854 VPN router using WinXP IPSec client
Establishing a VPN tunnel to CNet CWR-854 VPN router using WinXP IPSec client Generally speaking, remote users need to use a VPN client software for establishing a VPN connection to their home/work router
More informationINTRODUCTION... 2 Windows 7... 2 Windows 8... 7 Mac OS X... 11 Ubuntu... 15 Advanced routing... 18 Windows... 18 Mac OS X... 18 Ubuntu...
INTRODUCTION... 2 Windows 7... 2 Windows 8... 7 Mac OS X... 11 Ubuntu... 15 Advanced routing... 18 Windows... 18 Mac OS X... 18 Ubuntu... 18 Updated: Juha Jokinen Page (1/18) INTRODUCTION This is a guide
More informationEnable VPN PPTP Server Function
How to use VPN PPTP Server/Client on TW- EAV510/EAV510 AC Note: Please make sure that both LAN side networks are in different subnet. Enable VPN PPTP Server Function Go to Advanced Setup - > VPN - > PPTP
More information7. Configuring IPSec VPNs
7. This guide describes how to use the Unified Threat Management appliance (UTM) IPSec VPN Wizard to configure the IP security (IPSec) virtual private networking (VPN) feature. This feature provides secure,
More informationHow To Configure L2TP VPN Connection for MAC OS X client
How To Configure L2TP VPN Connection for MAC OS X client How To Configure L2TP VPN Connection for MAC OS X client Applicable Version: 10.00 onwards Overview Layer 2 Tunnelling Protocol (L2TP) can be used
More informationI. What is VPN? II. Types of VPN connection. There are two types of VPN connection:
Table of Content I. What is VPN?... 2 II. Types of VPN connection... 2 III. Types of VPN Protocol... 3 IV. Remote Access VPN configuration... 4 a. PPTP protocol configuration... 4 Network Topology... 4
More informationUsing Opensource VPN Clients with Firetunnel
This document describes how to use VPN Clients. Since the number of VPN Tunnels using PPTP is limited to 4, this is your way to connect up to 10 parallel tunnels using VPN/IPSEC technology. The method
More informationHow To Industrial Networking
How To Industrial Networking Prepared by: Matt Crites Product: Date: April 2014 Any RAM or SN 6xxx series router Legacy firmware 3.14/4.14 or lower Subject: This document provides a step by step procedure
More informationV310 Support Note Version 1.0 November, 2011
1 V310 Support Note Version 1.0 November, 2011 2 Index How to Register V310 to Your SIP server... 3 Register Your V310 through Auto-Provision... 4 Phone Book and Firmware Upgrade... 5 Auto Upgrade... 6
More informationRouteFinder. IPSec VPN Client. Setup Examples. Reference Guide. Internet Security Appliance
RouteFinder Internet Security Appliance IPSec VPN Client Setup Examples Reference Guide RouteFinder IPSec VPN Client Setup Examples PN S000397A Revision A This publication may not be reproduced, in whole
More informationConfiguring IPSec VPN Tunnel between NetScreen Remote Client and RN300
Configuring IPSec VPN Tunnel between NetScreen Remote Client and RN300 This example explains how to configure pre-shared key based simple IPSec tunnel between NetScreen Remote Client and RN300 VPN Gateway.
More informationSetting up VPN Access for Remote Diagnostics Support
Setting up VPN Access for Remote Diagnostics Support D. R. Joseph, Inc. supports both dial-up and Internet access for remote support of 3GIBC1 and LF-Sizer control systems. This document describes how
More informationVPN PPTP Application. Installation Guide
VPN PPTP Application Installation Guide 1 Configuring a Remote Access PPTP VPN Dial-in Connection A remote worker establishes a PPTP VPN connection with the head office using Microsoft's VPN Adapter (included
More informationHow To Configure Apple ipad for Cyberoam L2TP
How To Configure Apple ipad for Cyberoam L2TP VPN Connection Applicable to Version: 10.00 (All builds) Layer 2 Tunneling Protocol (L2TP) can be used to create VPN tunnel over public networks such as the
More informationM2M Series Routers. Port Forwarding / DMZ Setup
Introduction Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. Many internet services and applications use designated
More informationFAQs: MATRIX NAVAN CNX200. Q: How to configure port triggering?
FAQs: MATRIX NAVAN CNX200 Q: How to configure port triggering? Port triggering is a type of port forwarding where outbound traffic on predetermined ports sends inbound traffic to specific incoming ports.
More informationUTM - VPN: Configuring a Site to Site VPN Policy using Main Mode (Static IP address on both sites) i...
Page 1 of 10 Question/Topic UTM - VPN: Configuring a Site to Site VPN Policy using Main Mode (Static IP address on both sites) in SonicOS Enhanced Answer/Article Article Applies To: SonicWALL Security
More information1:1 NAT in ZeroShell. Requirements. Overview. Network Setup
1:1 NAT in ZeroShell Requirements The version of ZeroShell used for writing this document is Release 1.0.beta11. This document does not describe installing ZeroShell, it is assumed that the user already
More informationInternet Access Setup
Internet Access Setup Introduction In the Quick Setup group, you can configure the router to access the Internet with differnet modes (e.g. PPPoE, PPTP or Dynamic/Static IP). For most users, Internet access
More informationConfiguring IPsec VPN with a FortiGate and a Cisco ASA
Configuring IPsec VPN with a FortiGate and a Cisco ASA The following recipe describes how to configure a site-to-site IPsec VPN tunnel. In this example, one site is behind a FortiGate and another site
More informationHow to configure VPN function on TP-LINK Routers
How to configure VPN function on TP-LINK Routers 1. VPN Overview... 2 2. How to configure LAN-to-LAN IPsec VPN on TP-LINK Router... 3 3. How to configure GreenBow IPsec VPN Client with a TP-LINK VPN Router...
More informationProtecting the Home Network (Firewall)
Protecting the Home Network (Firewall) Basic Tab Setup Tab DHCP Tab Advanced Tab Options Tab Port Forwarding Tab Port Triggers Tab DMZ Host Tab Firewall Tab Event Log Tab Status Tab Software Tab Connection
More informationInternet Access Setup
CHAPTER 3 Internet Access Setup 3.1 Introduction In the Quick Setup group, you can configure the router to access the Internet with different modes (e.g. PPPoE, PPTP or Dynamic/Static IP). For most users,
More informationUsing IPsec VPN to provide communication between offices
Using IPsec VPN to provide communication between offices This example provides secure, transparent communication between two FortiGates located at different offices using route-based IPsec VPN. In this
More informationTechnical Support Information
Technical Support Information Broadband Module/Broadband Module Plus Configuration Guidance Setting up Remote Access to a Network Device (Mail/File Server/Camera Etc) connected to the LAN port of the Broadband
More information1 PC to WX64 direction connection with crossover cable or hub/switch
1 PC to WX64 direction connection with crossover cable or hub/switch If a network is not available, or if it is desired to keep the WX64 and PC(s) completely separated from other computers, a simple network
More informationConfiguration Guide. How to set up the IPSec site-to-site Tunnel between the D-Link DSR Router and the Sonicwall Firewall.
Configuration Guide How to set up the IPSec site-to-site Tunnel between the D-Link DSR Router and the Sonicwall Firewall Overview This document describes how to implement IPSec with pre-shared secrets
More informationVPN Wizard Default Settings and General Information
1. ProSecure UTM Quick Start Guide This quick start guide describes how to use the IPSec VPN Wizard to configure IPSec VPN tunnels on the ProSecure Unified Threat Management (UTM) Appliance. The IP security
More informationWindows Vista: Connecting to the fastnsecure@hood wireless network at Hood College
Windows Vista: Connecting to the fastnsecure@hood wireless network at Hood College Please ensure your computer meets the following criteria in order to successfully make a connection to this network: 802.11n
More informationScenario 1: One-pair VPN Trunk
VPN Trunk Load-Balance between Vigor3200 and Other Vigor Router This section will discuss how to build VPN Trunk with load-balance between Vigor3200 and other router (e.g., Vigor3300). Scenario 1: One-pair
More informationHow to configure your Thomson SpeedTouch 780WL for ADSL2+
How to configure your Thomson SpeedTouch 780WL for ADSL2+ Connecting up your router This guide assumes that you have successfully: unpacked your router connected it up to your phone socket using the DSL
More informationAppendix A: Configuring Firewalls for a VPN Server Running Windows Server 2003
http://technet.microsoft.com/en-us/library/cc757501(ws.10).aspx Appendix A: Configuring Firewalls for a VPN Server Running Windows Server 2003 Updated: October 7, 2005 Applies To: Windows Server 2003 with
More informationInitial Access and Basic IPv4 Internet Configuration
Initial Access and Basic IPv4 Internet Configuration This quick start guide provides initial and basic Internet (WAN) configuration information for the ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
More informationChapter 2 Connecting the FVX538 to the Internet
Chapter 2 Connecting the FVX538 to the Internet Typically, six steps are required to complete the basic connection of your firewall. Setting up VPN tunnels are covered in Chapter 5, Virtual Private Networking.
More informationChapter 9 Monitoring System Performance
Chapter 9 Monitoring System Performance This chapter describes the full set of system monitoring features of your ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN. You can be alerted to important
More informationLab 4.4.8a Configure a Cisco GRE over IPSec Tunnel using SDM
Lab 4.4.8a Configure a Cisco GRE over IPSec Tunnel using SDM Objective Scenario Topology In this lab, the students will complete the following tasks: Prepare to configure Virtual Private Network (VPN)
More informationVPN Configuration of ProSafe VPN Lite software and NETGEAR ProSafe Router:
Page 1 of 8 VPN Configuration of ProSafe VPN Lite software and NETGEAR ProSafe Router: This document will guide you on how to create IKE and auto-vpn policies for your ProSafe NETGEAR Router, as well as
More informationConfiguration Guide. How to set up the IPSec site-to-site Tunnel between the D-Link DSR Router and the Fortinet Firewall. Overview
Configuration Guide How to set up the IPSec site-to-site Tunnel between the D-Link DSR Router and the Fortinet Firewall Overview This document describes how to implement IPSec with pre-shared secrets establishing
More informationipad Installation and Setup
ipad Installation and Setup INDEX ipad Features Page 2 Charging.. Page 2 User Guide... Page 3 Setup for ipad use in the office (Office wireless network) Setup Office computers Verify Remote Desktop is
More informationHow to put the DVR online
How to put the DVR online They are 3 steps required in order to get your DVR online and have users logged in remotely. WE STRONGLY RECOMMEND USING A ROUTER TO AVOID VIRUS AND OTHER COMPLICATIONS. Step
More informationAirStation VPN Setup Guide WZR-RS-G54
AirStation VPN Setup Guide WZR-RS-G54 WZR-RS-G54 Introduction The WZR-RS-G54 s VPN services allows users to securely access their home or office network from anywhere in the world. All services available
More informationEmail Update Instructions
1 Email Update Instructions Contents Email Client Settings The Basics... 3 Outlook 2013... 4 Outlook 2007... 6 Outlook Express... 7 Windows Mail... 8 Thunderbird 3... 9 Apple Mail... 10 2 Email Client
More informationConfiguration Guide. How to establish IPsec VPN Tunnel between D-Link DSR Router and iphone ios. Overview
Configuration Guide How to establish IPsec VPN Tunnel between D-Link DSR Router and iphone ios Overview The iphone is a line of smartphones designed and marketed by Apple Inc. It runs Apple s IOS mobile
More informationHow to convert a wireless router to be a wireless. access point
How to convert a wireless router to be a wireless access point Thanks for purchasing Edimax Wireless Router. This instruction can be applied if you want to keep your wired router and you need Edimax Wireless
More informationHow To Establish IPSec VPN connection between Cyberoam and Mikrotik router
How To Establish IPSec VPN connection between Cyberoam and Mikrotik router Applicable Version: 10.00 onwards Scenario Establish IPSec VPN connection between Cyberoam and Mikrotik router using Preshared
More informationBroadband Bandwidth Controller
User s Manual Broadband Bandwidth Controller Model No.: SP883B World Wide Web: www.micronet.com.tw Table of Content -------------------------------------------------------------------------------------------------------------------------
More informationQuick Installation Guide DAP-1360. Wireless N 300 Access Point & Router
DAP-1360 Wireless N 300 Access Point & Router BEFORE YOU BEGIN Delivery Package Access point DAP-1360 Power adapter DC 12V Ethernet cable (CAT 5E) (brochure). If any of the items are missing, please contact
More informationMulti-Homing Dual WAN Firewall Router
Multi-Homing Dual WAN Firewall Router Quick Installation Guide M73-APO09-400 Multi-Homing Dual WAN Firewall Router Overview The Multi-Homing Dual WAN Firewall Router provides three 10/100Mbit Ethernet
More informationConfiguring the OfficeConnect Secure Gateway for a remote L2TP over IPSec connection
Creating L2TP over IPSec VPNs between the OfficeConnect Cable/DSL Secure Gateway and the Microsoft VPN Client 1.0 Introduction The OfficeConnect Cable/DSL Secure Gateway supports IPSec, PPTP and L2TP over
More informationNAS 224 Remote Access Manual Configuration
NAS 224 Remote Access Manual Configuration Connect to your ASUSTOR NAS through the Internet A S U S T O R C O L L E G E COURSE OBJECTIVES Upon completion of this course you should be able to: 1. Configure
More informationFirewall VPN Router. Quick Installation Guide M73-APO09-380
Firewall VPN Router Quick Installation Guide M73-APO09-380 Firewall VPN Router Overview The Firewall VPN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN,
More informationConfigure IPSec VPN Tunnels With the Wizard
Configure IPSec VPN Tunnels With the Wizard This quick start guide provides basic configuration information about setting up IPSec VPN tunnels by using the VPN Wizard on the ProSafe Wireless-N 8-Port Gigabit
More informationChapter 1 Configuring Basic Connectivity
Chapter 1 Configuring Basic Connectivity This chapter describes the settings for your Internet connection and your wireless local area network (LAN) connection. When you perform the initial configuration
More informationInstallation and Setup
Installation and Setup Xoom INDEX Xoom Features/Pictures. Page 2 Accessories.. Page 2 Accessing Users Guides... Page 3 itap RDP mouse modes... Page 3 Setup for Xoom use in the office (Office wireless network)
More informationSetting up VPN connection: DI-824VUP+ with Windows PPTP client
Setting up VPN connection: DI-824VUP+ with Windows PPTP client DI-824VUP+ (firmware 1.03 or higher) LAN IP: 192.168.0.1 Subnet Mask: 255.255.255.0 WAN IP: 203.111.91.1 Subnet Mask: 255.255.255.252 Default
More informationConnecting an Android to a FortiGate with SSL VPN
Connecting an Android to a FortiGate with SSL VPN This recipe describes how to provide a group of remote Android users with secure, encrypted access to the network using FortiClient and SSL VPN. You must
More informationWireless Setup for Windows 8
Wireless Setup for Windows 8 Wireless Names KUEMPLOYEE Only Kettering Staff and Faculty can connect to this wireless o Network Access, Internet Access, Printer Access, License Manager KUSTUDENT Active
More informationHow to connect to NAU s WPA2 Enterprise implementation in a Residence Hall:
How to connect to NAU s WPA2 Enterprise implementation in a Residence Hall: General Settings To connect to the ResNet-Secure SSID, a device is needed that supports 802.1X authentication and WPA2 Enterprise.
More informationQuick Note 53. Ethernet to W-WAN failover with logical Ethernet interface.
Quick Note 53 Ethernet to W-WAN failover with logical Ethernet interface. Digi Support August 2015 1 Contents 1 Introduction... 2 1.1 Introduction... 2 1.2 Assumptions... 3 1.3 Corrections... 3 2 Version...
More informationPre-lab and In-class Laboratory Exercise 10 (L10)
ECE/CS 4984: Wireless Networks and Mobile Systems Pre-lab and In-class Laboratory Exercise 10 (L10) Part I Objectives and Lab Materials Objective The objectives of this lab are to: Familiarize students
More informationConfigure an IPSec Tunnel between a Firebox Vclass & a Check Point FireWall-1
Configure an IPSec Tunnel between a Firebox Vclass & a Check Point FireWall-1 This document describes how to configure an IPSec tunnel between a WatchGuard Firebox Vclass appliance (Vcontroller version
More informationNAS 322 Connecting Your NAS to a VPN
NAS 322 Connecting Your NAS to a VPN Connect your ASUSTOR NAS to a VPN network A S U S T O R C O L L E G E COURSE OBJECTIVES Upon completion of this course you should be able to: 1. Have a basic understanding
More informationEmail Update Instructions
Email Update Instructions Table of Contents Email Client Settings The Basics... 2 Outlook 2013... 2 Outlook 2007... 4 Outlook Express... 6 Windows Mail... 7 Thunderbird 3... 9 Apple Mail... 11 1 Email
More informationFirewall Defaults and Some Basic Rules
Firewall Defaults and Some Basic Rules ProSecure UTM Quick Start Guide This quick start guide provides the firewall defaults and explains how to configure some basic firewall rules for the ProSecure Unified
More informationHow to Create a Basic VPN Connection in Panda GateDefender eseries
How to Create a Basic VPN Connection in Panda GateDefender eseries Support Documentation How-to guides for configuring VPNs with Panda GateDefender eseries Panda Security wants to ensure you get the most
More informationChapter 5 Virtual Private Networking Using IPsec
Chapter 5 Virtual Private Networking Using IPsec This chapter describes how to use the IPsec virtual private networking (VPN) features of the ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN to provide
More informationHow To Establish Site-to-Site VPN Connection. using Preshared Key. Applicable Version: 10.00 onwards. Overview. Scenario. Site A Configuration
How To Establish Site-to-Site VPN Connection How To Establish Site-to-Site IPSec VPN Connection using Preshared key using Preshared Key Applicable Version: 10.00 onwards Overview IPSec is an end-to-end
More informationConfiguring Global Protect SSL VPN with a user-defined port
Configuring Global Protect SSL VPN with a user-defined port Version 1.0 PAN-OS 5.0.1 Johan Loos johan@accessdenied.be Global Protect SSL VPN Overview This document gives you an overview on how to configure
More informationRF550VPN and RF560VPN
RF550VPN and RF560VPN FQDN & DDNS Examples Reference Guide How-To: RF550VPN/RF560VPN FQDN & DDNS Examples Copyright 2003 This publication may not be reproduced, in whole or in part, without prior expressed
More informationStep-by-Step Setup Guide Wireless File Transmitter FTP Mode
EOS Step-by-Step Setup Guide Wireless File Transmitter FTP Mode Ad Hoc Setup Windows XP 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited. 1
More informationConfiguring the WT-4 for Upload to a Computer (Ad-hoc Mode)
En Configuring the WT-4 for Upload to a Computer (Ad-hoc Mode) Windows XP This document provides basic instructions on configuring the WT-4 wireless transmitter and a Windows XP Professional SP2 computer
More informationCustomer Installation Guide NBG-4615 v2 ZyXEL Wireless Router
Customer Installation Guide NBG-4615 v2 ZyXEL Wireless Router Form #496PTC Rev. 09/2013 Hardware Installation 1. First, connect the DSL modem to the WAN port, located on the back of the NBG-4615 v2, on
More informationWireless Network Configuration Guide
CIT Table of Contents Introduction... 1 General Wireless Settings... 1 1. Windows XP Wireless Configuration... 2 2. Windows XP Intel Pro Wireless Tool... 7 3. Windows Vista Using the Windows Wireless Tools...
More informationConfiguring an IP (SIP) Polycom Soundstation on the Avaya IP Office
Hardware used for this documentation Polycom Soundstation IP 6000 Avaya IP500V2 firmware 7.0.23 Set the Polycom with an IP Address Step 1: Initial setup If your Soundstation does not automatically register
More informationBasics of Port Forwarding on a Router for Security DVR s
Basics of Port Forwarding on a Router for Security DVR s The basic concept of setting up your router to allow for Off Site access to your DVR involves setting up the two necessary ports the Security DVR
More informationDEPLOYMENT GUIDE Version 1.0. Deploying the BIG-IP Edge Gateway for Layered Security and Acceleration Services
DEPLOYMENT GUIDE Version 1.0 Deploying the BIG-IP Edge Gateway for Layered Security and Acceleration Services Table of Contents Table of Contents Using the BIG-IP Edge Gateway for layered security and
More informationConfiguring the WT-4 for Upload to a Computer (Infrastructure Mode)
En Configuring the WT-4 for Upload to a Computer (Infrastructure Mode) Windows XP This document provides basic instructions on configuring the WT-4 wireless transmitter and a Windows XP Professional SP2
More informationNAT (Network Address Translation)
NAT (Network Address Translation) Introduction NAT (Network Address Translation) is a method of mapping one or more IP addresses and/or IP service ports into different specified values. Two functions of
More informationCreating a Gateway to Client VPN between Sidewinder G2 and a Mac OS X Client
A P P L I C A T I O N N O T E Creating a Gateway to Client VPN between Sidewinder G2 and a Mac OS X Client This application note describes how to set up a VPN connection between a Mac client and a Sidewinder
More informationC-more Remote Access with Apple ipad or iphone Tutorial
C-more Remote Access with Apple ipad or iphone Tutorial P a g e 2 Introduction: This script will walk you through the basic process of setting up the remote access with an Apple ipad with the Remote Access
More informationConfiguring Routers and Their Settings
Configuring Routers and Their Settings When installing a router on your home network the routers settings are usually defaulted to automatically protect your home, and simplify setup. This is done because
More informationMulti-Homing Security Gateway
Multi-Homing Security Gateway MH-5000 Quick Installation Guide 1 Before You Begin It s best to use a computer with an Ethernet adapter for configuring the MH-5000. The default IP address for the MH-5000
More informationD-Link DAP-1360 Repeater Mode Configuration
D-Link DAP-1360 Repeater Mode Configuration Outline 1. Package Contents 2. System Requirements 3. Hardware Overview Connections LED s WPS LED/Button 4. Default Settings 5. Configuring your LAN Adapter
More informationTALKSWITCH VOIP NETWORK TROUBLESHOOTING GUIDE
TALKSWITCH DOCUMENTATION TALKSWITCH VOIP NETWORK TROUBLESHOOTING GUIDE RELEASE 3.24 CT.TS005.008001 ANSWERS WITH INTELLIGENCE COPYRIGHT INFORMATION TalkSwitch. Copyright 2006. All Rights Reserved. Reproduction,
More informationNetwork/VPN Overlap How-To with SonicOS 2.0 Enhanced Updated 9/26/03 SonicWALL,Inc.
Network/VPN Overlap How-To with SonicOS 2.0 Enhanced Updated 9/26/03 SonicWALL,Inc. Introduction In this whitepaper, we will configure a VPN tunnel between two SonicWALLs running SonicOS 2.0 Enhanced that
More informationHOWTO: How to configure VPN SSL roadwarrior to gateway
HOWTO: How to configure VPN SSL roadwarrior to gateway How-to guides for configuring VPNs with GateDefender Integra Panda Software wants to ensure you get the most out of GateDefender Integra. For this
More informationQuick Start Guide. WRV210 Wireless-G VPN Router with RangeBooster. Cisco Small Business
Quick Start Guide Cisco Small Business WRV210 Wireless-G VPN Router with RangeBooster Package Contents WRV210 Router Ethernet Cable Power Adapter Product CD-ROM Quick Start Guide Welcome Thank you for
More informationInstallation Guides - Information required for connection to the Goldfields Institute s (GIT) Wireless Network
Installation Guides - Information required for connection to the Goldfields Institute s (GIT) Wireless Network Wireless Network Names and Credentials There are two wireless networks operating at the Goldfields
More informationTesira Voice-over-IP Interface. Preliminary Steps. Configuring a Cisco CallManager system to work with Biamp s SVC-2 card
Configuring a Cisco CallManager system to work with Biamp s SVC-2 card Tesira Voice-over-IP Interface Biamp s SVC-2 card allows Biamp Tesira digital signal processors to make and receive calls over any
More informationConfiguring the WT-4 for ftp (Ad-hoc Mode)
En Configuring the WT-4 for ftp (Ad-hoc Mode) Mac OS X Introduction This document provides basic instructions on configuring the WT-4 wireless transmitter and a Mac OS X (10.5.2) ftp server for transmission
More information