Emerson Network Power Rack PDU Systems

Transcription

1 AC Power For Business-Critical Continuity Emerson Network Power Rack PDU Systems Product Selection Guide - North American Models

2

3 TABLE OF CONTENTS 1.0 EMERSON NETWORK POWER RACK PDU SYSTEMS Safety and Agency Compliance DETERMINING THE RIGHT EMERSON PDU FOR YOUR APPLICATION KNURR DI-STRIP PRODUCT SELECTION GUIDE - BASIC RACK PDUS Overview - Basic Rack PDUs Basic Rack PDU Optional Cord Sets Dimensional Drawings - Basic Rack PDUs LIEBERT MPH PRODUCT SELECTION GUIDE - MANAGED RACK PDUS Overview - Managed Rack PDUs Specifications - Liebert MPH Model Number Configuration - Liebert MPH Managed Rack PDU Optional Cord Sets and Cable Restraints Dimensional Drawings - Managed Rack PDUs LIEBERT MPX - ADAPTIVE RACK PDUS Overview - Adaptive Rack PDUs MPX PRC (Power Rail Chassis) MPX PEM (Power Entry Module) and MPX IPC (Input Power Cord) MPX BRM (Branch Receptacle Module) Adaptive Rack PDU Optional Accessories Cord Sets and Cable Restraints Liebert RPC (RPC-1000) and Accessories Part Numbers for Liebert RPC and Accessories Ports on the Liebert RPC Liebert RPC Capabilities and Benefits RPC BDM Basic Display Module Temperature/Humidity Sensor LIEBERT MPX SYSTEM PRODUCT SELECTION GUIDE STEP 1 - Select an MPX PRC (Quantity x 1) STEP 2 - Select an MPX PEM / MPX IPC (Quantity x 1) STEP 3 - Select an MPX BRM STEP 4 - Select Communication Options System Selection Guide Specifications for Liebert MPX Components Dimensional Drawings - Adaptive Rack PDUs i

4 FIGURES Figure 1 Knurr DI-STRIP Figure 2 Knurr DI-STRIP Figure 3 Knurr DI-STRIP Figure 4 Knurr DI-STRIP Figure 5 Knurr DI-STRIP Figure 6 Knurr DI-STRIP Figure 7 Knurr DI-STRIP Figure 8 Knurr DI-STRIP Figure 9 Knurr DI-STRIP Figure 10 Knurr DI-STRIP Figure 11 Knurr DI-STRIP Figure 12 Knurr DI-STRIP Figure 13 Knurr DI-STRIP Figure 14 Knurr DI-STRIP Figure 15 Knurr DI-STRIP Figure Knurr DI-STRIP Figure 17 Knurr DI-STRIP Figure 18 Knurr DI-STRIP Figure 19 Knurr DI-STRIP Figure 20 Knurr DI-STRIP Figure 21 Knurr DI-STRIP Figure 22 Knurr DI-STRIP Figure 23 Liebert MPH rack mount power strip Figure 24 Liebert MPH vertical power strip Figure 25 Liebert MPX 1880 and 1035 models and components Figure 26 MPX PRC (Power Rail Chassis) Figure 27 Liebert RPC ports Figure 28 RPC BDM Figure 29 Temperature/humidity sensor Figure 30 Liebert MPX MPXPRC-1035mm mixed modules Figure 31 Liebert MPX MPXPRC-1880mm mixed modules TABLES Table 1 Specifications - Knurr DI-STRIP Table 2 Cord sets - Knurr DI-STRIP Table 3 Specifications - Liebert MPH Table 4 Cord sets and cable restraints - Liebert MPH Table 5 Selections for Power Entry Module MPXPEM-NVAXXAXX Table 6 Selections for Power Entry Module MPXPEM-NHBXXV Table 7 Selections for Power Entry Module MPXPEM-NHBXXX Table 8 Selections for Power Entry Module MPXPEM-NHBXXW Table 9 Specifications - MPX BRM ii

5 1.0 EMERSON NETWORK POWER RACK PDU SYSTEMS Emerson Network Power Rack PDU Systems Emerson Network Power s Rack PDU Systems is a family of products that delivers power and management to connected IT equipment through a global and comprehensive offering including Basic, Managed and Adaptive Rack PDU systems. Each PDU type offers simplified installation and easy operation. Each type is compatible with standard rack enclosures. These Emerson Rack PDUs provide easy low-cost installation, simple relocation, security and proven design and performance. Emerson Rack PDUs can be set up with varying degrees of power-monitoring and management. When power or management requirements grow, the adaptive PDUs are scalable, enabling them to grow with the installation. Emerson PDUs are available for the entire spectrum of power needs of every type of rack equipment. Knurr DI-STRIP - Basic Rack PDU systems, provide a broad range of power distribution capacities and connectivity solutions in a robust package. Liebert MPH - Managed Rack PDUs with single-phase or three-phase capability for fixed power input/output with remote management support; one-piece unit with monitoring at the branch level and control at the receptacle level; available in rack-mount and zero U configurations. Liebert MPX - Adaptive Rack PDUs built with modular and scalable components that can be installed and reconfigured on-site to meet changing input and output power connectivity needs; with remote monitoring at the branch level and receptacle management and control at the receptacle level. 1.1 Safety and Agency Compliance Where a conflict arises between the following documents and statements made herein, the statements in this specification will govern. North American Units - 120V and 208V (Single-Phase and Three-Phase) UL Information Technology Equipment CAN/CSA-C22.2 No Information Technology Equipment FCC, Title 47, Part 15 Subpart B for Class A operation as defined by ANSI Standard C63.4 ISTA Procedure 1A and 2A RoHS Compliant 1

6 Determining the Right Emerson PDU for Your Application 2.0 DETERMINING THE RIGHT EMERSON PDU FOR YOUR APPLICATION Each of the Rack PDU systems Emerson offers is well-suited for delivering power to sensitive, highcapacity, rack-mounted equipment. Determining which is best for a particular installation requires knowing the basic power requirements of the equipment in the rack, deciding on the acceptable or preferable level of monitoring and control and then balancing those considerations against site requirements. The Emerson Rack PDU product line includes models to fit all types of installations: new or established; stable or rapidly changing; contracting or expanding. Each type of installation may require any or all types of Emerson Rack PDUs. After determining your requirements, refer to the data and specifications for each product. 2

7 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs 3.0 KNURR DI-STRIP PRODUCT SELECTION GUIDE - BASIC RACK PDUS 3.1 Overview - Basic Rack PDUs Part Number The Knurr DI-STRIP, a Basic Rack PDU system, provides a broad range of power distribution capacities and connectivity solutions in a robust package. The Knurr DI-STRIP includes an input power cord with appropriate input plug connection and hydraulic-magnetic branch rated overload protection as appropriate; basic rack mounting provisions are also provided. Knurr DI-STRIP Rack PDUs are available in rack mount and vertical zero-u form factors. The Knurr DI-STRIP fits most standard 600mm width network equipment rack enclosures. Product fit should be confirmed for each application. Table 1 Specifications - Knurr DI-STRIP INPUT OUTPUT Voltage Max Continuous kw* Phase Plug Receptacle/Socket Configuration NEMA 5-15P (9) NEMA 5-15R Form Factor Rack mount or Vertical NEMA 5-15P (12) NEMA 5-15R Vertical NEMA 5-15P (18) NEMA 5-15R Vertical NEMA L5-20P (9) NEMA 5-20 T-Slot Vertical NEMA 5-20P (12) NEMA 5-20 T-Slot Vertical NEMA L5-20P (12) NEMA 5-20 T-Slot Vertical NEMA L5-30P (24) NEMA 5-20 T-Slot Vertical NEMA L6-20P (9) IEC-C13 sockets Vertical ** IEC-C20 inlet (9) IEC-C13 sockets Rack mount or Vertical NEMA L6-20P (12) IEC-C13 sockets Vertical ** IEC-C20 inlet (12) IEC-C13 sockets Vertical NEMA L6-30P (4) IEC-C19 sockets Vertical NEMA L6-30P (24) IEC-C13 sockets Vertical NEMA L6-30P (20) IEC-C13 + (4) IEC-C19 sockets Vertical / NEMA L21-20P (18) IEC-C13 + (6) IEC-C19 sockets Vertical / NEMA L21-20P (27) IEC-C13 + (6) IEC-C19 sockets Vertical / NEMA L21-20P (27) 5-20 T-Slot Vertical / NEMA L21-30P (6) IEC-C19 sockets Vertical / NEMA L21-30P (18) IEC-C13 + (6) IEC-C19 sockets Vertical / NEMA L21-30P (27) IEC-C13 + (6) IEC-C19 sockets Vertical IEC60309 (3 pole, 4 wire, 250VAC, blue) (2) IEC (3 pole, 4 wire, 250VAC, blue) All input cords are 10 ft. (3m) in length. * Formulas used to calculate the kw: For single-phase: input voltage x max continuous amps = watts For three-phase: input voltage x max continuous amps x 1.73 = watts ** Knurr DI-STRIP output expansion modules require the use of a cord set for input power. (42) IEC-C13 + (6) IEC-C19 sockets (42) IEC-C13 + (6) IEC-C19 sockets Vertical Vertical 3

8 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs 3.2 Basic Rack PDU Optional Cord Sets Output Cord Sets Output cord sets are available to support conversion of Rack PDU power output receptacles to alternative power output connections and to support Rack PDU output expansion capabilities. Conversion of power output connections can be provided on Rack PDUs with IEC-C19 receptacles. The output cord set for these systems includes an IEC-C20 plug to connect to the IEC-C19 receptacle, a 3 ft. (1m) power cord and receptacle to connect to user equipment. Available receptacles include: IEC-C13 to connect to IEC-C14 equipment plugs and IEC-C19 to connect to NEMA L6-20P equipment plugs. Knurr DI-STRIP output expansion modules are powered via an IEC-C20 input connection. These systems provide output expansion capabilities when connected to a receptacle on a separate Rack PDU. The output cord set for these systems includes an IEC-C19 receptacle to connect to the IEC-C20 plug on the output expansion Knurr DI-STRIP, a 3 ft. (1m) power cord and plug to connect to the Rack PDU receptacle providing power. Available plugs include: IEC-C20 to connect to an IEC-C19 Rack PDU receptacle. Input Cord Sets Input cord sets are available to support conversion of Rack PDU power input connections to alternative power input connections. Conversion of power input can be provided on Rack PDUs with L5-20P plug connections. The input cord set includes an L5-20R receptacle to connect to the L5-20P Rack PDU plug, a 1 ft. (0.3m) power cord and a 5-20P plug. Table 2 Cord sets - Knurr DI-STRIP Cord Sets Output Cord Sets - Power Output Conversion G5 Output Cord Set - Power Output Conversion - IEC-C20 to IEC-C13, 3 ft. (1m) G6 Output Cord Set - Power Output Conversion - IEC-C20 to IEC-C13, 10 ft. (3m) G9 Output Cord Set - Power Output Conversion - IEC-C20 to NEMA L6-20R, 3 ft. (1m) G10 Output Cord Set - Power Output Conversion - IEC-C20 to NEMA L6-20R, 10 ft. (3m) Output Cord Sets - Power Output Expansion G7 Output Cord Set - Power Output Expansion - IEC-C20 to IEC-C19, 3 ft. (1m) G8 Output Cord Set - Power Output Expansion - IEC-C20 to IEC-C19, 10 ft. (3m) G3 Output Cord Set - Power Output Expansion - IEC-C14 to IEC-C19, 3 ft. (1m) G4 Output Cord Set - Power Output Expansion - IEC-C14 to IEC-C19, 10 ft. (3m) Input Cord Sets - Power Input Conversion G12 Input Cord Set - Power Input Conversion - L5-20R to 5-20P, 1 ft. (0.3m) 4

9 3.3 Dimensional Drawings - Basic Rack PDUs Figure 1 Knurr DI-STRIP Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (73mm) 17.6" (447mm) FRONT VIEW 12.2" (311mm) REAR VIEW SIDE VIEW INPUT POWER Input Cord 10 ft. (3m) 5-15P (2-pole, 3-wire) Input Plug Phase Voltage (VAC) Max. Cont. 5-15P OUTPUT POWER Bank Receptacle Type (Qty) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank R (9) " (63mm) 1.7" (44mm) 2" (50mm) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 2.5 lb. (1.1kg) 3. Shipping dimensions: 18.9" (480mm) L x 2.8" (71mm) W x 3.3" (84mm) D 4. Shipping weight: 2.8 lb. (1.3kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 5

10 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 2 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (123mm) 19.6" (497mm) FRONT VIEW 12.2" (311mm) REAR VIEW SIDE VIEW INPUT POWER Input Cord Input Plug Phase 10 ft. (3m) 5-15P (2-pole, 3-wire) Voltage (VAC) Max. Cont. 5-15P OUTPUT POWER Bank Receptacle Type (Qty) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank R (9) " (63mm) 1.7" (44mm) 2" (50mm) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 2.7 lb. (1.2kg) 3. Shipping dimensions: 22.2" (565mm) L x 2.8" (70mm) W x 3.3" (85mm) D 4. Shipping weight: 3.1 lb. (1.4kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 6

11 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 3 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (697mm) FRONT VIEW 1.7" (44mm) 12.7" (323mm) 12.2" (311mm) 2.5" (63mm) REAR VIEW 2" (50mm) SIDE VIEW INPUT POWER 5-15P (2-pole, 3-wire) Input Input Cord Plug Phase 10 ft. (3m) OUTPUT POWER Bank Receptacle Type (Qty) Voltage (VAC) Max. Cont. 5-15P Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank R (18) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 27.4" (697mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 3.3 lb. (1.5kg) 3. Shipping dimensions: 42" (1065mm) L x 2.4" (60mm) W x 3" (75mm) D 4. Shipping weight: 3.8 lb. (1.72kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 7

12 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 4 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (447mm) FRONT VIEW REAR VIEW SIDE VIEW INPUT POWER Input Input Cord Plug Phase 10 ft. (3m) L5-20P (2 pole, 3 wire) Voltage (VAC) Max. Cont. L5-20P OUTPUT POWER Bank Receptacle Type (Qty) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank R (9) " (44mm) 2" (50mm) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 3 lb. (1.35kg) 3. Shipping dimensions: 26.8" (680mm) L x 2.4" (60mm) W x 3.9" (100mm) D 4. Shipping weight: 3.4 lb. (1.54kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 8

13 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 5 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (123mm) 19.6" (497mm) FRONT VIEW 12.2" (311mm) 2.5" (63mm) 1.7" (44mm) REAR VIEW 2" (50mm) SIDE VIEW INPUT POWER Input Input Cord Plug Phase 10 ft. (3m) OUTPUT POWER Bank Receptacle Type (Qty) 5-20P (2-pole, 3-wire) Voltage (VAC) Max. Cont. 5-20P Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank R (9) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 3.5 lb. (1.57kg) 3. Shipping dimensions: 26.8" (680mm) L x 2.4" (60mm) W x 3.9" (100mm) D 4. Shipping weight: 3.9 lb. (1.76kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 9

14 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 6 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (123mm) 19.6" (497mm) FRONT VIEW 12.2" (311mm) 2.5" (63mm) 1.7" (44mm) REAR VIEW 2" (50mm) SIDE VIEW INPUT POWER Input Cord Input Plug Phase 10 ft. (3m) OUTPUT POWER Bank Receptacle Type (Qty) L5-20P (2-pole, 3-wire) Voltage (VAC) Max. Cont. L5-20P Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank R (12) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 3.2 lb. (1.47kg) 3. Shipping dimensions: 24.6" (625mm) L x 2.4" (60mm) W x 3.9" (100mm) D 4. Shipping weight: 3.5 lb. (1.6kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 10

15 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 7 Knurr DI-STRIP " (46mm) 20A branch circuit breakers Branch 1 20A branch circuit breakers Branch 2 DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (44mm) 43.2" (1097mm) FRONT VIEW.6" (422mm) 24.5" (622mm) 2.1" (53mm) REAR VIEW 3.3" (85mm) SIDE VIEW L5-30P (2-pole, 3-wire) INPUT POWER Input Cord Input Plug Phase 10 ft. (3m) OUTPUT POWER Branch Receptacle Type (Qty) Voltage (VAC) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Branch R (12) R (12) 120 Max. Cont. L5-30P AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 43.2" (447mm) L x 1.7" (44mm) W x 3.3" (85mm) D 2. Unit weight: 7.51 lb. (3.4kg) 3. Shipping dimensions: 44.9" (1140mm) L x 2.8" (70mm) W x 6.3" (0mm) D 4. Shipping weight: 8.4 lb. (3.8kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 4 11

16 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 8 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (447mm) FRONT VIEW REAR VIEW SIDE VIEW INPUT POWER Input Input Cord Plug Phase 10 ft. (3m) L6-20P (2-pole, 3-wire) Voltage (VAC) Max. Cont. L6-20P OUTPUT POWER Bank Receptacle Type (Qty) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank 1 IEC-C13 (9) " (44mm) 2" (50mm) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 3.2 lb. (1.4kg) 3. Shipping dimensions: 24.6" (625mm) L x 2.4" (60mm) W x 3.9" (100mm) D 4. Shipping weight: 3.4 lb. (1.5kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 12

17 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 9 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (447mm) FRONT VIEW IEC-C20 inlet 2.5" (63mm) 12.2" (311mm) 2.9" (73mm) 1.7" (44mm) REAR VIEW 2" (50mm) SIDE VIEW AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) INPUT POWER Input Cord Input Phase 10 ft. (3m) * Requires a cordset OUTPUT POWER Bank IEC-C20 Inlet * Receptacle Type (Qty) Voltage (VAC) Max. Cont Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank 1 IEC-C13 (9) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 1.5 lb. (0.7kg) 3. Shipping dimensions: 19" (483mm) L x 3" (75mm) W x 2.4" (60mm) D 4. Shipping weight: 1.7 lb. (0.8kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 13

18 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 10 Knurr DI-STRIP DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (497mm) FRONT VIEW 4.8" (123mm) 12.2" (311mm) 2.5" (63mm) 1.7" (44mm) REAR VIEW 2" (50mm) SIDE VIEW L6-20P (2-pole, 3-wire) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) INPUT POWER Input Input Cord Plug Phase 10 ft. (3m) OUTPUT POWER Bank Receptacle Type (Qty) Voltage (VAC) Max. Cont. L6-20P Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank 1 IEC-C13 (12) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 3.4 lb. (1.5kg) 3. Shipping dimensions: 26.8" (680mm) L x 2.4" (60mm) W x 3.9" (100mm) D 4. Shipping weight: 3.7 lb. (1.68kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 14

19 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 11 Knurr DI-STRIP IEC-C20 INLET 19.6" (497mm) FRONT VIEW 4.8" (123mm) 12.2" (311mm) 2.5" (63mm) DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A 1.7" (44mm) / REAR VIEW 2" (50mm) SIDE VIEW AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) INPUT POWER Bank Input Input Cord Plug Phase 10 ft. (3m) IEC-C20 inlet * * Requires a cordset OUTPUT POWER Receptacle Type (Qty) Voltage (VAC) Max. Cont Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Bank 1 IEC-C13 (12) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D 2. Unit weight: 1.8 lb. (0.8kg) 3. Shipping dimensions: 22.6" (575mm) L x 2.4" (60mm) W x 3" (75mm) D 4. Shipping weight: 2.1 lb. (0.9kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 15

20 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 12 Knurr DI-STRIP A branch circuit breaker Branch " (447mm) FRONT VIEW REAR VIEW 1.8" (46mm) SIDE VIEW INPUT POWER Input Cord Input Plug Phase Voltage L6-30P (2-pole, 3-wire) Max. Cont. 10 ft. (3m) L6-30P OUTPUT POWER Branch Receptacle Type (Quantity) Per Receptacle Type Phase Voltage (VAC) IEC-C19 (2) IEC-C19 (2) Max. Continuous Per Receptacle Per Branch A branch circuit breaker Branch 2 DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (44mm) 3.3" (85mm) AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage Temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit Dimensions: 17.6" (447mm) L x 1.7" (44mm) W x 2.0" (50mm) D 2. Unit Weight: 4.8lb. (2.2kg) 3. Shipping Dimensions: 29.0" (740mm) L x 6.3" (0mm) W x 2.7" (70mm) D 4. Shipping Weight: 5.5lbs (2.5kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3

21 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 13 Knurr DI-STRIP " (46mm) 20A Branch Circuit Breaker 20A Branch Circuit Breaker BRANCH 1 BRANCH 2 DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (1097mm) FRONT VIEW.6" (422mm) 24.5" (622mm) REAR VIEW INPUT POWER Input Cord Input Plug Phase Voltage (VAC) Max Cont. 10 ft/3.0m L6-30P OUTPUT POWER L6-30P (2 Pole, 3 Wire) Per Receptacle Type Receptacle Type Branch (Quantity) Phase Voltage (VAC) 1 2 IEC-C13 (12) IEC-C13 (12) Max Cont. Per Receptacle Per Branch SIDE VIEW AGENCY: CSA Tested to UL RoHS Compliant (Reduction of Hazardous Substances) ENVIRONMENTAL: Operating: 32 F-131 F (0 C-55 C ) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F-140 F (-20 C - 60 C ) NOTES: 1. Unit Dimensions: 43.2" (1097mm) L x 1.7" (44mm) W x 3.3" (85mm) D 2. Unit Weight: 6.8lbs (3.1kg) 3. Shipping Dimensions: 44.9" (1140mm) L x 2.8" (70mm) W x 6.3" (0mm) D 4. Shipping Weight: 7.7lbs (3.5kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev " (44mm) 2.1 (53mm) 3.3" (85mm) 17

22 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 14 Knurr DI-STRIP " (170mm) 21.3" (540mm) FRONT VIEW 20A branch circuit breaker TOP VIEW 20A branch circuit breaker 1.9" (47mm) L6-30P (2-pole, 3-wire) INPUT POWER BOTTOM VIEW Input Cord Input Plug Phase Voltage (VAC) Max. Cont. 10 ft. (3m) L6-30P OUTPUT POWER Branch Receptacle Type (Qty) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Branch 1 IEC-C13 (10) / IEC-C19 (2) 1 / / / 20 2 IEC-C13 (10) / IEC-C19 (2) 1 / / / 20 AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 21.3" (540mm) L x 6.7" (170mm) W x 1.9" (47mm) D 2. Unit weight: 15 lb. (6.8kg) 3. Shipping dimensions: 22.4" (570mm) L x 11.6" (295mm) W x 6.3" (0mm) D 4. Shipping weight: 18.3 lb. (8.3kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 18

23 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 15 Knurr DI-STRIP " [46mm 20A Branch Circuit Breaker Branch 1 20A Branch Circuit Breaker Branch 2 20A Branch Circuit Breaker Branch 3 DI STRIP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (697mm) FRONT VIEW 24.5" (622mm) 0.9" (23mm) 1.7" (44mm) REAR VIEW 3.3" (85mm) INPUT POWER L21-30P (4 pole, 5 wire) Input Cord Input Plug Phase 10 ft. (3m) L21-30P 3 OUTPUT POWER Voltage (VAC) 120/208 Receptacle Type Per Receptacle Type Branch (Quantity) Phase Voltage (VAC) 1 IEC-C19 (2) IEC-C19 (2) IEC-C19 (2) SIDE VIEW Max Cont Max Cont. Per Receptacle Per Branch AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive, Storage Temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 27.4" (697mm) L x 1.7" (44mm) W x 3.3" (85mm) D 2. Unit weight: 8 lb. (3.6kg) 3. Shipping dimensions: 64.6" (40mm) L x 2.8" (70mm) W x 6.3" (0mm) D 4. Shipping weight: 9.4 lb. (4.3kg) 5. All wiring is to be in compliance with national and local electric codes Mounting provisions provided. Rev. 3 19

24 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure Knurr DI-STRIP Branch 1 Branch 3 DI STRIP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (44mm) 39.3" (997mm) FRONT VIEW Branch " (322mm) 24.5" (622mm) 2.1" (53mm) REAR VIEW 2.0" (50mm) INPUT POWER L21-20P (4 pole, 5 wire) SIDE VIEW AGENCY: CSA Tested to UL RoHS Compliant (Reduction of Hazardous Substances) ENVIRONMENTAL: Operating: 32 F-131 F (0 C to 55 C ) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F to 140 F (-20 C to 60 C ) Input Cord Input Plug Phase Voltage (VAC) Max Cont. 10 ft/3.0m L21-20P 3 120/ OUTPUT POWER Branch Receptacle Type (Quantity) Per Receptacle Type Phase Voltage (VAC) Max Cont. Per Receptacle Per Branch NOTES: 1. Unit Dimensions: 39.3" (997mm) L x 1.7" (44mm) W x 2.0" (50mm) D 2. Unit Weight: 5.8 lb. (2.63kg) 3. Shipping Dimensions: 40.4" (1027mm) L x 2.3" (60mm) W x 3.9" (100mm) D 4. Shipping Weight: 6.2 lb. (2.8kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided IEC-C13 (6)/IEC-C19 (2) IEC-C13 (6)/IEC-C19 (2) IEC-C13 (6)/IEC-C19 (2) 1 / 1 1 / 1 1 / / / / / 12 / 12 / Rev. 3 20

25 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 17 Knurr DI-STRIP Branch 3 Branch 2 DI STRIP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (44mm) 51.1" (1297mm) FRONT VIEW 11.9" (301mm) Branch " (934mm) 2.5 (63mm) REAR VIEW 2.0" (50mm) SIDE VIEW INPUT POWER L21-20P (4 Pole, 5 Wire) Input Cord Input Plug Phase Voltage (VAC) Max Cont. 10 ft/3.0m L21-20P 3 120/ AGENCY: CSA Tested to UL RoHS Compliant (Reduction of Hazardous Substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C ) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F to 140 F (-20 C to 60 C ) OUTPUT POWER Bank Receptacle Type (Quantity) IEC-C13 (9) / IEC-C19 (2) IEC-C13 (9) / IEC-C19 (2) IEC-C13 (9) / IEC-C19 (2) Per Receptacle Type Phase 1 / 1 1 / 1 1 / 1 Voltage (VAC) / / / Max Cont. Per Receptacle Per Bank 12 / 12 / 12 / NOTES: 1. Unit Dimensions: 51.1" (1297mm) L x 1.7" (44mm) W x 2.0" (50mm) D 2. Unit Weight: 7.0 lb. (3.2kg) 3. Shipping Dimensions: 72.0" (1830mm) L x 2.4" (60mm) W x 3.5" (90mm) D 4. Shipping Weight: 7.5 lb. (3.4kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 21

26 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 18 Knurr DI-STRIP Branch 3 Branch 1 DI STRIP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (44mm) 39.3" [997mm] FRONT VIEW 39.3" [997mm 12.3" (312mm) Branch " [622mm] 24.5" (622mm) 2.5 (63mm) REAR VIEW 2.0" (50mm) L21-20P (4 Pole, 5 Wire) INPUT POWER Input Cord Input Plug Phase Voltage (VAC) Max Cont. 10 ft/3.0m L21-20P 3 120/ OUTPUT POWER Bank Receptacle Type (Quantity) 5/20R (9) 5/20R (9) 5/20R (9) Per Receptacle Type Phase Voltage (VAC) Max Cont. Per Receptacle Per Bank SIDE VIEW AGENCY: CSA Tested to UL RoHS Compliant (Reduction of Hazardous Substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C ) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F to 140 F (-20 C to 60 C ) NOTES: 1. Unit Dimensions: 39.3" (997mm) L x 1.7" (44mm) W x 2.0" (50mm) D 2. Unit Weight: 5.7lb. (2.6kg) 3. Shipping Dimensions: 40.4" (1027mm) L x 2.3" (60mm) W x 4.0" (100mm) D 4. Shipping Weight: 6.3lb. (2.85kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 22

27 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 19 Knurr DI-STRIP A branch circuit breaker Branch 1 20A branch circuit breaker Branch 2 20A branch circuit breaker Branch 3 1.7" (44mm) DI STR IP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (1297mm) FRONT VIEW 25.7" (652mm) 24.5" (622mm) 0.9" (23mm) 1.8" (46mm) REAR VIEW 3.3" (85mm) INPUT POWER L21-30P (4-pole, 5-wire) Input Cord Input Plug Phase Voltage (VAC) Max. Cont. SIDE VIEW AGENCY: CSA tested to UL RoHS compliant (reduction of hazardous substances) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C), 5% - 95% RH non-condensing, non-corrosive Storage temperature: -4 F to 140 F (-20 C to 60 C) 10 ft. (3m) L21-30P / OUTPUT POWER Branch Receptacle Type (Qty) Receptacle Type Max. Cont. Phase Voltage (VAC) Per Receptacle Per Branch 1 IEC-C13 (6) / IEC-C19 (2) 1 / / / 20 2 IEC-C13 (6) / IEC-C19 (2) 1 / / / 20 3 IEC-C13 (6) / IEC-C19 (2) 1 / / / 20 NOTES: 1. Unit dimensions: 51.1" (1297mm) L x 1.7" (44mm) W x 3.3" (85mm) D 2. Unit weight: 10.1 lb. (4.6kg) 3. Shipping dimensions: 64.6" (40mm) L x 2.8" (70mm) W x 6.3" (0mm) D 4. Shipping weight: 11.6 lb. (5.25kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 23

28 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 20 Knurr DI-STRIP A Branch Circuit Breaker 20A Branch Circuit Breaker 20A Branch Circuit Breaker Branch 1 Branch 2 Branch 3 1.7" (44mm) DI STRIP NA BASIC 120 VAC, 60Hz Input: max. 15A Outlets: max. 15A / " (1597mm) Front View 13.0" (330mm) 49.0" (1245mm) 0.9" (22mm) Rear View 1.8" (46mm) L21-30P (4 Pole, 5 Wire) INPUT POWER Input Cord Input Plug 10ft/3.0m L21-30P 3 120/ OUTPUT POWER Branch Receptacle Type (Quantity) Phase IEC-C13 (9) / IEC-C19 (2) IEC-C13 (9) / IEC-C19 (2) IEC-C13 (9) / IEC-C19 (2) Voltage (VAC) Per Receptacle Type Phase 1 / 1 1 / 1 1 / 1 Voltage (VAC) / / / Max Cont. Max Cont. Per Receptacle Per Branch 12 / / / 20 AGENCY: CSA Tested to UL " RoHS Compliant (Reduction of Hazardous Substances) (85mm) ENVIRONMENTAL: Operating: 32 F to 131 F (0 C to 55 C ) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F to 140 F (-20 C to 60 C ) NOTES: 1. Unit Dimensions: 62.9" (997mm) L x 1.7" (44mm) W x 3.3" (85mm) D 2. Unit Weight: 11.0lb. (5.0kg) 3. Shipping Dimensions: 72.4" (1840mm) L x 2.8" (70mm) W x 6.3" (0mm) D 4. Shipping Weight: 12.7lb. (5.75kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 3 24

29 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 21 Knurr DI-STRIP " (170mm) 20A Branch Circuit Breaker 20A Branch Circuit Breaker 20A Branch Circuit Breaker 63.0" (00mm) FRONT VIEW 20A Branch Circuit Breaker 20A Branch Circuit Breaker 20A Branch Circuit Breaker REAR VIEW OUTPUT POWER IEC (3 POLE, 4 WIRE, 250VAC, BLUE) INPUT POWER Input Cord Input Plug Phase Voltage (VAC) 10ft/3.0m IEC Branch Receptacle Type (Quantity) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) Phase 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 60 Per Receptacle Type Voltage (VAC) / / / / / / SIDE VIEW Max. Cont. 48 Max. Cont. Per Receptacle Per Branch 12 / / / / / / " (47mm) AGENCY: UL , cul RoHS Compliant (Reduction of Hazardous Substances) ENVIRONMENTAL: Operating: 32 F-131 F (0 C to 55 C) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F to 140 F (-20 C to 60 C) NOTES: 1. Unit dimensions: 63.0" (00mm) L x 6.7" (170mm) W x 1.9" (47mm) D 2. Unit Weight: 32.8lbs (14.9kg) 3. Shipping Dimensions: 74.0" (1880mm) L x.3" (415mm) W x 6.3" (0mm) D 4. Shipping Weight: 38.4lb. (17.4kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 5 25

30 Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs Figure 22 Knurr DI-STRIP " (170mm) 20A Branch Circuit Breaker 20A Branch Circuit Breaker 20A Branch Circuit Breaker 63" (00mm) FRONT VIEW 20A Branch Circuit Breaker 20A Branch Circuit Breaker 20A Branch Circuit Breaker REAR VIEW INPUT POWER Input Cord Input Plug Phase Voltage (VAC) 10ft/3.0m IEC OUTPUT POWER IEC (3 POLE, 4 WIRE, 250VAC, BLUE) SIDE VIEW Max. Cont " (47mm) AGENCY: UL , cul RoHS Compliant (Reduction of Hazardous Substances) ENVIRONMENTAL: Operating: 32 F-131 F (0 C to 55 C) non-condensing, non-corrosive, 5% - 95% RH Storage Temperature: -4 F to 140 F (-20 C to 60 C) Input/ Branch 1/1 1/2 1/3 2/4 2/5 2/6 Receptacle Type (Quantity) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) IEC-C13 (7) / IEC-C19 (1) Per Receptacle Type Phase 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 Voltage (VAC) / / / / / / Max. Cont. Per Receptacle Per Branch 12 / / / / / / 20 NOTES: 1. Unit dimensions: 63.0" (00mm) L x 6.7" (170mm) W x 1.9" (47mm) D 2. Unit Weight: 44.5lb. (20.2kg) 3. Shipping Dimensions: 74.0" (1880mm) L x.3" (415mm) W x 6.3" (0mm) D 4. Shipping Weight: 50lb. (22.7kg) 5. All wiring is to be in compliance with national and local electric codes. 6. Mounting provisions provided Rev. 5 26

31 Liebert MPH Product Selection Guide - Managed Rack PDUs 4.0 LIEBERT MPH PRODUCT SELECTION GUIDE - MANAGED RACK PDUS 4.1 Overview - Managed Rack PDUs The Liebert MPH Managed Rack PDU system delivers power distribution, branch monitoring and receptacle control for IT devices. Liebert MPH Rack PDUs, with remote monitoring and/or control capabilities for power distribution at the load/equipment level, are designed to support the growth in rack electrical needs while meeting the new demands for remote power management. The Liebert MPH monitors electrical attributes of an individual Rack PDU, including real-time remote and (optional) local display of monitoring of aggregate and branch electrical parameters (status, thresholds, alarms) including voltage, amps, kw, and kw-hr. Liebert MPH features include branch load monitoring and control for continuous uptime and minimum disruptions; expandable monitoring interface providing simplified growth management; rugged construction; and the convenience of being factory-installed in the Knurr rack enclosure system. The Liebert MPH includes an input power cord with appropriate input plug connection and hydraulic-magnetic branch rated overload protection as appropriate; basic rack mounting provisions are also provided. Liebert MPH Managed Rack PDUs are available in rack mount and vertical zero-u form factors and are painted black. Liebert MPH Managed Rack PDUs / Liebert MPH-NB Systems (Branch Monitoring Only) Liebert MPH-NB series Rack PDUs provide local and remote monitoring of individual PDU volts, amps, watts, and kilowatt-hours. Liebert MPH Managed Rack PDUs / Liebert MPH-NC (Monitoring & Receptacle Control) Liebert MPH-NC series power strips provide the same features and functionality as the Liebert MPH-NB series with the additional capability of remote on/off control of individual receptacles. Local receptacle power on-off status is provided through an LED display. Liebert MPH Managed Rack PDUs ALL Liebert MPH Systems All Liebert MPH systems are provided with a factory-integrated Liebert RPC (Rack PDU Card RPC-1000) that provides Web-based remote monitoring via a direct IP network connection, Rack PDU Array interface connection to three additional Liebert MPH or Liebert MPX systems to allow viewing of up to four Rack PDUs on a single IP connection, an environmental sensor port, and a port for connection to the optional local display. Local display monitoring is provided via the optional RPC BDM (Basic Display Module) and integrated audible alarm. See Adaptive Rack PDU Optional Accessories for further details. Each Liebert MPH unit is provided with basic rack mounting provisions to meet a range of installation needs. The Liebert MPH fits most standard 600mm width network equipment rack enclosures. Product fit should be confirmed for each application. 27

32 Liebert MPH Product Selection Guide - Managed Rack PDUs 4.2 Specifications - Liebert MPH Table 3 Specifications - Liebert MPH Part Number Branch Monitoring Voltage (VAC) INPUT Max. Continuous kw* Phase Plug OUTPUT Receptacle/Socket Configuration Form Factor MPH-NBR09AXXC NEMA L5-20P (9) NEMA 5-20R T-Slot Rack mount MPH-NBV27AXXC NEMA L5-20P (27) NEMA 5-20R T-Slot Vertical MPH-NBR09AXXD NEMA L5-30P (9) NEMA 5-20R T-Slot Rack mount MPH-NBV27AXXD NEMA L5-30P (27) NEMA 5-20R T-Slot Vertical MPH-NBR09NXXE NEMA L6-20P (9) IEC-C13 Rack mount MPH-NBV27NXXE NEMA L6-20P (27) IEC-C13 Vertical MPH-NBR09NXXF NEMA L6-30P (9) IEC-C13 Rack mount MPH-NBV27NXXF NEMA L6-30P (27) IEC-C13 Vertical MPH-NBV27NOXF NEMA L6-30P (21) IEC-C13 & (6) IEC-C19 Vertical MPH-NBV27NXXJ NEMA L15-30P (27) IEC-C13 Vertical MPH-NBV27NOXJ NEMA L15-30P (21) IEC-C13 & (6) IEC-C19 Vertical MPH-NBV27AMXH30 120/ NEMA L21-30P (15) IEC-C13, (6) NEMA 5-20 T-slot & Vertical (6) IEC-C19 MPH-NBV27AXXH30 120/ NEMA L21-30P (27) NEMA 5-20R T-Slot Vertical MPH-NBV27ANXH30 120/ NEMA L21-30P (21) IEC-C13 & (6) NEMA 5-20R T-Slot Vertical MPH-NBV27NXXH30 120/ NEMA L21-30P (27) IEC-C13 Vertical MPH-NBV27NOXH30 120/ NEMA L21-30P (21) IEC-C13 & (6) IEC-C19 Vertical Receptacle Control MPH-NCR09AXXC NEMA L5-20P (9) NEMA 5-20R T-Slot Rack mount MPH-NCV27AXXC NEMA L5-20P (27) NEMA 5-20R T-Slot Vertical MPH-NCR09AXXD NEMA L5-30P (9) NEMA 5-20R T-Slot Rack mount MPH-NCV27AXXD NEMA L5-30P (27) NEMA 5-20R T-Slot Vertical MPH-NCR09NXXE NEMA L6-20P (9) IEC-C13 Rack mount MPH-NCV27NXXE NEMA L6-20P (27) IEC-C13 Vertical MPH-NCR09NXXF NEMA L6-30P (9) IEC-C13 Rack mount MPH-NCV27NXXF NEMA L6-30P (27) IEC-C13 Vertical MPH-NCV27NOXF NEMA L6-30P (21) IEC-C13 & (6) IEC-C19 Vertical MPH-NCV27NXXJ NEMA L15-30P (27) IEC-C13 Vertical MPH-NCV27NOXJ NEMA L15-30P (21) IEC-C13 & (6) IEC-C19 Vertical (15) IEC-C13, MPH-NCV27AMXH30 120/ NEMA L21-30P (6) NEMA 5-20 T-slot & Vertical (6) IEC-C19 MPH-NCV27AXXH30 120/ NEMA L21-30P (27) NEMA 5-20R T-Slot Vertical MPH-NCV27ANXH30 120/ NEMA L21-30P (21) IEC-C13 & (6) NEMA 5-20R T-Slot Vertical MPH-NCV27NXXH30 120/ NEMA L21-30P (27) IEC-C13 Vertical MPH-NCV27NOXH30 120/ NEMA L21-30P (21) IEC-C13 & (6) IEC-C19 Vertical All input cords are 10 ft. (3m) in length. * Formulas used to calculate the kw: For single-phase: input voltage x max continuous amps = watts For three-phase: input voltage x max continuous amps x 1.73 = watts 28

33 4.3 Model Number Configuration - Liebert MPH Example: MPH N B R 09 AX XC 30 Liebert MPH Product Selection Guide - Managed Rack PDUs Prefix: MPH Region: N = North American Type: B = Branch Monitoring C = Controlled Receptacles Mounting: V = Vertical R = Rack mount Output Power: Quantity Receptacles (Total): 09 or 27 Receptacle Type(s) 2 characters (each set): A = 5-20R T-Slot N = IEC-C13 O = IEC-C19 Note: Second character indicates a second receptacle type (X if no additional type chosen) Input Power: Plug Type: First character = X Second character: C=L5-20P D=L5-30P E=L6-20P F=L6-30P H = L21-30P J = L15-30P Cord Length: 30 = 3.0m (10 ft.) 29

34 Liebert MPH Product Selection Guide - Managed Rack PDUs 4.4 Managed Rack PDU Optional Cord Sets and Cable Restraints Output Cord Sets Output cord sets are available to support conversion of Rack PDU power output receptacles to alternative power output connections and to support Rack PDU output expansion capabilities. Conversion of power output connections can be provided on Rack PDUs with IEC-C19 receptacles. The output cord set for these systems includes an IEC-C20 plug to connect to the IEC-C19 receptacle, a 3 ft. (1m) power cord and receptacle to connect to user equipment. Available receptacles include: IEC-C13 to connect to IEC-C14 equipment plugs and IEC-C19 to connect to NEMA L6-20P equipment plugs. Input Cord Sets Input cord sets are available to support conversion of Rack PDU power input connections to alternative power input connections. Conversion of power input can be provided on Rack PDUs with L5-20P plug connections. The input cord set includes an L5-20R receptacle to connect to the L5-20P Rack PDU plug, a 1 ft. (0.3m) power cord and a 5-20P plug. Cable Restraints (Liebert MPH - Vertical Systems) Cable restraints are available to secure user equipment power cord connections to IEC-C13 receptacles. The Liebert MPH supports all vertical-mount models with IEC-C13 receptacles or a combination of IEC-C13 plus IEC-C19 receptacles. The cable restraint system includes three tie-down brackets for receptacle groups along with cable ties to secure individual input user equipment power cables. Table 4 Cord sets and cable restraints - Liebert MPH Cord Sets and Cable Restraints Output Cord Sets - Power Output Conversion G5 Output Cord Set - Power Output Conversion - IEC-C20 to IEC-C13, 3.3 ft. (1m) G6 Output Cord Set - Power Output Conversion - IEC-C20 to IEC-C13, 10 ft. (3m) G9 Output Cord Set - Power Output Conversion - IEC-C20 to NEMA L6-20R, 3.3 ft. (1m) G10 Output Cord Set - Power Output Conversion - IEC-C20 to NEMA L6-20R, 10 ft. (3m) Input Cord Sets - Power Input Conversion G12 Input Cord Set - Power Input Conversion - L5-20P to 5-20P, 1 ft. (0.3m) Cable Restraints IEC-C13 (Liebert MPH - Vertical Systems) 11858KIT Cable Restraints - MPH Vertical Systems with IEC-C13 receptacles 30