Process Change Notice #
|
|
|
- Sibyl Phillips
- 9 years ago
- Views:
Transcription
1 User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, how-to and design documents, product change notices (PCN) and other valuable content available only to registered users. PCN Date: 5/7/2014 Effective Date: 5/7/2014 Title: 8-SOIC assembly site addition - ASECL Originator: Kyle Beckmeyer Phone: Dept: Marketing Customer Contact: Kathy Haggar Phone: (512) Dept: Sales PCN Type: Datasheet Foundry Packing Product Revision Assembly Labeling Discontinuance Test Other Last Order Date: Not Applicable. PCN Details Description of Change: Silicon Labs is pleased to announce the successful qualification of Advanced Semiconductor Engineering ChungLi, Taiwan (ASECL) as an additional assembly site for the 8-SOIC packaged clock products. ASECL is added to existing assembly providers United Test and Assembly Center, Thailand (UTACTH) and SPEL Semiconductor (SPEL). ASECL is an existing assembly and test site for Silicon Labs, and is certified to ISO9001, ISO14001, and ISO/TS Assembly Site Change: ASECL is a fully qualified supplier for the clock buffer product families in 8-pin SOIC package. Qualified Bill of Materials: Supplier SPEL (Existing) UTACTH (Existing) ASECL (New) Stamped, Alloy C194, Stamped, Alloy C194, Stamped, Matrix-Strip, Leadframe Ag-Spot plated Ag-Spot plated Double-Ring Ag-plating Die Attach Sumitomo CRM 1076NS Ablestik 8200T Hitachi EN4900 Wire bond 1.0 mil Au wire 0.8 mil Au wire 0.8 mil Au wire Mold Compound Sumitomo G600 Sumitomo G600 Hitachi CEL9240 Lead finish Sn 100 (Matte Tin) Sn 100 (Matte Tin) Sn 100 (Matte Tin) Reason for Change: Silicon labs has added ASECL to support the supply continuity. Impact on Form, Fit, Function, Quality, Reliability: There is no impact on fit, function, quality. MSL reliability level changed to MSL2A. Form changed per the listed bill of materials. The clock buffer products manufactured/assembled at ASECL fully comply with datasheet parameters and quality levels. Product Identification: See Appendix-A for affected part numbers without Silicon Laboratories written consent. The document is uncontrolled if printed or electronically saved. Pg 4
2 Last Date of Unchanged Product: 5/7/2014 Qualification Samples: ASECL samples are available now. Please contact your local Silicon Labs sales representative to order samples. A list of authorized representatives may be found at Specific conditions of acceptance of this change will be considered on a case by case basis if written notice is submitted within 30 days of this notice. To request further data or inquire about this notification, please contact your local Silicon Labs sales representative. A list of Silicon Labs sales representatives is available at In some cases rejection of a change notice may impact Silicon Labs product pricing, delivery, quality, or reliability. Customer Early Acceptance Sign Off: Customers may approve early PCN acceptance by completing the information below: Early Acceptance: Date: Name: Company: your early Acceptance approval to: [email protected] Qualification Data: See Appendix B for Assembly Qualification Report. Material Environmental Test Reports and MDDS reports are available at If you have questions about this notification, please contact your Silicon Labs sales representative. A list of Silicon Labs sales representatives is available at without Silicon Laboratories written consent. The document is uncontrolled if printed or electronically saved. Pg 5
3 Appendix A: Lists of Parts Affected SL12804BSC SL12804BSCT SL2305BSC-1H SL2305BSC-1HT SL2305NZSC SL2305NZSCT SL2305NZSI SL2305NZSIT SL2305SC-1 SL2305SC-1H SL2305SC-1HT SL2305SC-1T SL2305SI-1 SL2305SI-1H SL2305SI-1HT SL2305SI-1T SL23EP04SC-1 SL23EP04SC-1H SL23EP04SC-1HT SL23EP04SC-1T SL23EP04SC-2 SL23EP04SC-2H SL23EP04SC-2HT SL23EP04SC-2T SL23EP04SI-1 SL23EP04SI-1H SL23EP04SI-1HT SL23EP04SI-1T SL23EP04SI-2 SL23EP04SI-2H SL23EP04SI-2HT SL23EP04SI-2T SL23EP05BSC-1 SL23EP05BSC-1H SL23EP05BSC-1HT SL23EP05BSC-1T SL23EP05SC-1 SL23EP05SC-1H SL23EP05SC-1HT SL23EP05SC-1T SL23EP05SI-1 SL23EP05SI-1H SL23EP05SI-1HT SL23EP05SI-1T without Silicon Laboratories written consent. The document is uncontrolled if printed or electronically saved. Pg 6
4 Appendix B: Qualification Report: without Silicon Laboratories written consent. The document is uncontrolled if printed or electronically saved. Pg 7
5 without Silicon Laboratories written consent. The document is uncontrolled if printed or electronically saved. Pg 8
ALTERNATIVE ASSEMBLY SITE FOR THE EPC CONFIGURATION FAMILY
Revision: 1.0.1 PROCESS CHANGE NOTIFICATION PCN0903 ALTERNATIVE ASSEMBLY SITE FOR THE EPC CONFIGURATION FAMILY Change Description Altera is introducing Amkor, Philippines (ATP) and Amkor, Korea (ATK) as
Automotive Process Change Notification
Automotive Process Change Notification Date: September 26, 2014 PCN Reference: AU-14-168, D-Pak Leadframe and Bill of Materials (BOM) Product Reference: Automotive Planar Gen5.x and 7.x MOSFETs in D-Pak
Self Qualification Results
(ATO) Divisional Philips Semiconductors Philips Internal Report No.: RNR- 8 3-03/RdH/RdH- 2 0 3 6 QTS Report Database No.: 030692 Self Qualification Results NiPdAu lead- free solution of SO14/16/20 Products
RoHS / Lead-Free Initiative. Microsemi Analog Mixed Signal Group
RoHS / Lead-Free Initiative Microsemi Analog Mixed Signal Group Table of Contents RoHS / Pb-Free Initiative............................................... 3 RoHS / Pb-Free Transition Strategy......................................
Supply Chain Management Services
Supply Chain Management Services Stuttgart Zwolle Nördlingen Dresden certified by RoodMicrotec. RoodMicrotec the leading independent European company for semiconductor testing and quality services. Fields
Cypress Semiconductor Technology Qualification Report
Cypress Semiconductor Technology Qualification Report QT# 012415 VERSION 1.2 November, 2002 TSMC 0.15um Technology, Fab TSMC CY7C1371B/CY7C1373B CY7C1381B/CY7C1383B CY7C1381BV25/CY7C1383BV25 CY7C1371BV25/CY7C1373BV25
RJR Polymers Reliability Qualification Report RQFN55-24-A and RQFN44-12-A
Reliability Qualification Report RQFN55-24-A and RQFN44-12-A Package Qualification September 14, 2011 RJR Polymers Reliability Qualification Report RQFN55-24-A and RQFN44-12-A Table of Contents Purpose.3
QMS Introduction 2015
QMS Introduction 2015 Content Corporate Overview Development Process Qualification Process Manufacturing Process Supplier and Technology Selection Strategy Quality Overview Customer Support 2 Silicon Labs
Flip Chip Package Qualification of RF-IC Packages
Flip Chip Package Qualification of RF-IC Packages Mumtaz Y. Bora Peregrine Semiconductor San Diego, Ca. 92121 [email protected] Abstract Quad Flat Pack No Leads (QFNs) are thermally enhanced plastic packages
GE Power Electronics Business Total Quality Management for Suppliers
GE Power Electronics Business Total Quality Author: Reviewers: Contributors: Alessandro A. Cervone Technical Manager Component & Reliability Engineering Alicia Scott Title Erika Nannis Title Robert Roessler
Introducing Green Materials and Bill of Material change for the Cyclone II and MAX II Devices
Revision: 1.3.0 PROCESS CHANGE NOTIFICATION PCN1105 Introducing Green Materials and Bill of Material change for the Cyclone II and MAX II Devices Change Description This is an update to PCN1105; please
SEMI Equipment and Materials Outlook. Daniel Tracy Senior Director Industry Research & Statistics Group at SEMI in San Jose, California
SEMI Equipment and Materials Outlook Daniel Tracy Senior Director Industry Research & Statistics Group at SEMI in San Jose, California Wednesday March 18, 2015 Outline o Fab Investments and Equipment Spending
INTRODUCTION: PURPOSE:
UMBRA CUSCINETTI, INC. 2916 100 th Street SW Everett, WA 98204-1340 USA 425-743-2577 FAX: 425-347-0682 Printed versions may not be the latest. Suppliers shall utilize the latest version which can be found
MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features.
Features High Voltage CMOS Technology Complementary Outputs Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over
Implementation Rules of AC Contactor Energy Efficiency Label
Number: CEL 018 Implementation Rules of AC Contactor Energy Efficiency Label 1. General provisions 1.1 The rules are formulated according to Energy Efficiency Label Management Method (the 17 th Order of
Technical Note Recommended Soldering Parameters
Technical Note Recommended Soldering Parameters Introduction Introduction The semiconductor industry is moving toward the elimination of Pb from packages in accordance with new international regulations.
Printed Circuit Board Quick-turn Prototyping and Production
Printed Circuit Board Quick-turn Prototyping and Production Who We Are Bay Area Circuits has been serving the Printed Circuit Board (PCB) manufacturing needs of high-tech electronics manufacturers, contract
Overview of Real Time X-ray Training Track 6 at ERAI/IHS Conference 2012. Andrew Buchan ( Electronics Engineer)
Andrew Buchan ( Electronics Engineer) www.drtlonline.com Military Aerospace Communications Industrial Medical Overview of Real Time X-ray Training Track 6 at ERAI/IHS Conference 2012 Dynamic Research and
Introduction. Development of the AQEC Standard
Texas Instruments Incorporated Post Office Box 84 Sherman, Texas 75090 6412 Highway 75 South Sherman, Texas 75090 (903) 868-7111 Implementation of Aerospace Qualified Electronic Component Requirements
1.Introduction. Introduction. Most of slides come from Semiconductor Manufacturing Technology by Michael Quirk and Julian Serda.
.Introduction If the automobile had followed the same development cycle as the computer, a Rolls- Royce would today cost $00, get one million miles to the gallon and explode once a year Most of slides
HI-200, HI-201. Features. Dual/Quad SPST, CMOS Analog Switches. Applications. Ordering Information. Functional Diagram FN3121.9
Data Sheet FN3121.9 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200 240ns,
MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.
Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound
23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package
CHS2411-QDG Description GaAs Monolithic Microwave IC in SMD leadless package The CHS2411-QDG (CHS2412-QDG, see Note) is a monolithic reflective SP4T switch in K-Band. Positive supply voltage only is required.
Winbond W2E512/W27E257 EEPROM
Construction Analysis Winbond W2E512/W27E257 EEPROM Report Number: SCA 9703-533 Global Semiconductor Industry the Serving Since 1964 15022 N. 75th Street Scottsdale, AZ 85260-2476 Phone: 602-998-9780 Fax:
Please take action pursuant to your customer agreements and JEDEC 46.
You are reminded not to ship the product identified under this PCN until released by Semtech Corporation. A copy of their specific PCNs have been included with this notification. Please take action pursuant
Student Involvement: Middle / Secondary Laboratory Safety Activities
5. Students prepare worksheets using MSDSs of chemicals they will use in the science lab following Table 24 Student Practice in Reading an MSDS, Pg 100, Science Laboratory Safety Manual S&SCS. Science
Guideline for. General Automotive Quality Agreement for Electronic Components
Guideline for General Automotive Quality Agreement for Electronic Components Revision 2: Januar 2006 ZVEI-Guideline: General Automotive Quality Agreement for Electronic Components Impressum Guideline:
a. Are the foundry s employees trained and familiar with portions of the system applicable to their position?
1. Does the foundry have a documented quality system? a. Are the foundry s employees trained and familiar with portions of the system applicable to their position? b. What recognized quality management
Specializing in Open Cavity Packages & Complete IC Assembly Services ISO 9001:2008 Certified and ITAR Registered
TowerJazz Global Symposium Specializing in Open Cavity Packages & Complete IC Assembly Services and TowerJazz Global Symposium Quik-Pak a division of Delphon Industries 2011 Gold Sponsor and TowerJazz
RECTRON QUALITY / RELIABILITY PROGRAM
RECTRON QUALITY / RELIABILITY PROGRAM 1-1 Quality Control System-Basic Concepts Rectron first achieved ISO-9000 status in 1994. Naturally, Rectron has modeled its internal quality and rcliability standards
Step-by-Step Analytical Methods Validation and Protocol in the Quality System Compliance Industry
Step-by-Step Analytical Methods Validation and Protocol in the Quality System Compliance Industry BY GHULAM A. SHABIR Introduction Methods Validation: Establishing documented evidence that provides a high
Introduction to Silicon Labs. November 2015
Introduction to Silicon Labs November 2015 1 Company Background Global mixed-signal semiconductor company Founded in 1996; public since 2000 (NASDAQ: SLAB) >1,100 employees and 11 R&D locations worldwide
Exar Corporation Quality Manual
Exar Corporation Quality Manual Exar Corporation 48720 Kato Road Fremont, CA 94538 Tel: (510) 668-7000 Fax: (510) 668-7001 Executive Quality Improvement Team Commitment This quality manual provides a statement
REACH and RoHS System Supplier Training
REACH and RoHS System Supplier Training 1 Background Increasingly, the EU and other international markets are restricting the presence of hazardous materials in products and packaging. Goal is to eliminate
V OUT. I o+ & I o- (typical) 2.3A & 3.3A. Package Type
July 25 th, 2012 Automotive Grade AUIRS4427S DUAL LOW SIDE DRIVER Features Gate drive supply range from 6 V to 20 V CMOS Schmitt-triggered inputs 3.3V and 5V logic compatible Two independent gate drivers
Global Semiconductor Packaging Materials Outlook
NOVEMBER 2009 Global Semiconductor Packaging Materials Outlook Produced by Semiconductor Equipment and Materials International and TechSearch International, Inc. EXECUTIVE SUMMARY 1 1 INTRODUCTION 5 1.1
SUPPLIER QUALITY MANAGEMENT SYSTEM QUESTIONNAIRE
Company Name Street Address City, State, Zip code Phone Number Fax Company Website Email Address ORGANIZATION NAME PHONE NUMBER EMAIL ADDRESS President/CEO General Manager Engineering Manager Production
REVISION HISTORY APPROVERS
REVISION HISTORY Revision Description of Change Writer/Reviser Effective Date 1.0 As Issued. Renumbered from PEC-MAT-2-003-00. Lenora Bennett January 23, 2012 2.0 Updated Table 1 Nickel barrier specifications
How To Train Your Manufacturer To Change
Product Change Notification (PCN) Training For Manufacturers FEBRUARY 2012 REVISION B Disclaimer Training Objective Product Change Notification (PCN) Training for Manufacturers is intended for all Flextronics
Data sheet acquired from Harris Semiconductor SCHS020C Revised October 2003
Data sheet acquired from Harris Semiconductor SCHS020C Revised October 2003 The CD4009UB and CD4010B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line
PACKAGE QUALIFICATION SUMMARY REPORT
PACKAGE QUALIFICATION SUMMARY REPORT Document Control #: Purpose: Device: Mask Identification #: Process Technology: Product: To provide qualification summary report for all packages Various Various Pure
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
Failure Analysis (FA) Introduction
Failure Analysis (FA) Introduction (IC ) Tung-Bao Lu 1 of 29 Structure of conventional package gold wire leadframe chip EMC die-pad Failure Classification Physical Failure (Structure) - Popcorn - Delamination
Supplier Product / Process Change Notification Requirements
Supplier Product / Process Change Notification Requirements Skyworks Solutions, Inc. 20 Sylvan Road Woburn, MA 01801 Tel: 781-376-3000 Page 1 of 6 Skyworks SQ03-0393 Rev 2 Table of Contents 1 Purpose and
Trans-Tech, Inc. 5520 Adamstown Road Adamstown, MD 21710 Verify Approval Before Use
Trans-Tech, Inc. 5520 Adamstown Road Adamstown, MD 21710 Verify Approval Before Use Work Instruction Title: Supplier Qualification and Monitoring WI Number TT-WI-0137 Revision: 15 Department: Purchasing
UNCONTROLLED COPY FOR REFERENCE ONLY
CLOVER MACHINE AND MFG. 800 MATHEW ST. #101 SANTA CLARA, CA 95050 727-3380 727-7015 fax REVISION: DATE: PAGE 1 OF 45 QUALITY POLICY MANUAL DISTRIBUTION LIST: President Purchasing Manager Vice President
Data sheet acquired from Harris Semiconductor SCHS078C -- Revised October 2003
Data sheet acquired from Harris Semiconductor SCHS078C -- Revised October 2003 The CD4521B types are supplied in 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (M, M96,
Supplier Quality Assurance
Supplier Quality Assurance Preface We strive to continually improve our process performance by meeting quality objectives. It is imperative that our suppliers operate under the zero defects and 100% on
Supplier Guide. Suppliers for production material or services may be qualified for the list in one or more of the following ways:
Supplier Guide Purpose The purpose of this guide is to inform potential and current Suppliers to Jay Industries, Inc. of our policies as well as quality and performance requirements. Application This guide
Qualification of Auditor and Lead Auditor to perform an assessment according NSQ-100
Page 1 / 11 ABSTRACT Qualification of Auditor and Lead Auditor to CONTENTS 0. GENERAL... 2 0.1. Purpose... 2 0.2. Scope of application... 2 0.3. References... 2 0.4. Terminology... 2 1. SECTIONS... 2 1.1.
This procedure applies to the following categories of documents:
QOP-42-01 Control of Documents Issued by: Quality Assurance Effective Date: 6/6/2011 Rev. A Pg. 1 of 9 Approved: 6/6/2011 5:48 PM - Alan Halko, Quality Manager This procedure provides general rules for
PACKAGE OPTION ADDENDUM www.ti.com 12-Jan-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) 76005012A
Technical Manufacturing Corporation (TMC) Quality Manual
Technical Manufacturing Corporation (TMC) Quality Manual 15 Centennial Drive Peabody MA 01960 Revision: 19 Pages: 2 of 15 Date Issued: 03/13/2013 1. Table of Contents 1. TABLE OF CONTENTS... 2 2. ABOUT
PCN Structure FY 13/14
PCN Structure FY 13/14 A PCN FY 13/14 PCN text FY 13/14 QMS FY 12/14 Front End Materials A0101 Process Wafers CZ 150 mm CQT A0102 Process Wafers CZ 200 mm CQT A0103 Process Wafers FZ 150 mm CQT A0104 Process
MANUFACTURING INNOVATION
MANUFACTURING INNOVATION CORPORATE HISTORY Founded in 1974, as Dynamic Circuits we mainly served customers with production volume demands. We soon found that the market also had strong requirements for
SPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
AN111: Using 8-Bit MCUs in 5 Volt Systems
This document describes how to incorporate Silicon Lab s 8-bit EFM8 and C8051 families of devices into existing 5 V systems. When using a 3 V device in a 5 V system, the user must consider: A 3 V power
DOCUMENTED PROCEDURE MANUAL
NAPIT REGISTERED INSTALLERS DOCUMENTED PROCEDURE MANUAL CONTENTS 1. INTRODUCTION 2. DEFINITIONS 3. RESPONSIBILITY FOR QUALITY 4. DOCUMENT AND DATA CONTROL 5. CUSTOMER ENQUIRIES AND QUOTATIONS 6. CONTRACTS
KOLLMORGEN. Title: Standard Operating Procedure Counterfeit Parts
Approved By: Elliott Major Date: 11-19-09 Page 1 of 9 Rev ECO Date Approve Rev ECO Date Approve A R01_13541 07-23-10 DWL B R01_14787 12-15-11 DWL C R01_14910 03-07-12 DWL D R01_14964 04-16-12 DWL 1.0 Purpose
How To Get A Symmetry Installer From Amag
Program Details 20701 Manhattan Place Torrance CA 90501 Phone: 310-518-2380 Fax: 310-834-0685 Table of Contents Introduction... 3 Integration Offerings... 3 Certified Partner Benefits... 3 Program Processes...
Package Material Declaration
Code Atmel Corporation Material Declaration Datasheet ASE Shanghai REACH Compliant Yes Material Declaration Leadframe Copper (Cu) 7440 50 8 19.730 97.4 974000 26.21 262111 Iron (Fe) 7439 89 6 0.486 2.4
PACKAGE OPTION ADDENDUM www.ti.com 12-Jan-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) 5962-9557401QCA
Travel Expense Reimbursement: Electronic Receipts (ereceipts)
This quick reference guide is intended to be a tool to assist the Traveler in complying with Laboratory policy. Travelers should always consult the Laboratory Travel policy to gain a full understanding
RTP s NUCLEAR QUALITY ASSURANCE PROGRAM
RTP s NUCLEAR QUALITY ASSURANCE PROGRAM RTP operates under one quality program, whether you purchase products that are commercial grade, nuclear safety-related or industrial safety compliant (IEC 61508).
Skyworks Solutions, Inc. Mexicali Operations
Mexicali Operations The Skyworks Promise Skyworks state-of-the-art facility in Mexicali, Mexico delivers world-class assembly, test and finishing services for a broad portfolio of semiconductor solutions.
ICC EVALUATION SERVICE, LLC, RULES OF PROCEDURE FOR EVALUATION REPORTS
www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council ICC EVALUATION SERVICE, LLC, RULES OF PROCEDURE FOR EVALUATION REPORTS 1.0 PURPOSE These rules set forth procedures
Taping, Labeling, Storage, Packing and Marking
Taping, Labeling, Storage, Packing and Marking Vishay Semiconductor Standard Bar Code Labels Standard bar code labels for finished goods The standard bar code labels are product labels and used for identification
Data sheet acquired from Harris Semiconductor SCHS087D Revised October 2003
Data sheet acquired from Harris Semiconductor SCHS087D Revised October 2003 The CD4555B and CD4556B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line
Specialties Manufacturing. Talladega Castings & Machine Co., Inc. ISO 9001:2008. Quality Manual
Specialties Manufacturing Talladega Castings & Machine Co., Inc. ISO 9001:2008 This document is the property of TMS and may not be reproduced, wholly, or in part, without the express consent of TMS. Rev.
Introduction. Cooper Standard Global Supplier Quality Manual Page 2 of 11
Global Supplier Quality Manual Revision 3 Introduction 1. Purpose: This manual has been created for Cooper Standard s (CS) Production, Prototype and Service Suppliers. The manual includes all CS locations
B Recommended land pattern: [mm] C Stencil suggestion: 2015-03-11. SSt. SKl CHECKED DATE
![B Recommended land pattern: [mm] C Stencil suggestion: 2015-03-11. SSt. SKl CHECKED DATE](/thumbs/40/21834432.jpg "B Recommended land pattern: [mm] C Stencil suggestion: 2015-03-11. SSt. SKl CHECKED DATE")
A Dimensions: [mm] B Recommended land pattern: [mm] D Properties: Properties Surface Material Thread Tightening torque Solder Cream Thickness Packaging Value Tin plated 11SMnPb30 M2.5 0.35 Nm 150 µm Reel
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
VDA 6.3 Training & Qualification.
VDA 6.3 Training & Qualification. Process audit for better supply chain. Evaluate, analyse and enhance various controls in manufacturing processes. With TÜV SÜD and VDA QMC training. TÜV SÜD South Asia
Bogue Machine Company, Inc. Business Instruction
Bogue Machine Company, Inc. Business Instruction Document Title: Supplier Quality Control Requirements Document Number: Revision: Document Owner: Mark Bogue Backup Owner: Craig Bogue Parent Document: PURP-004,
History 02.02.2010. www.roodmicrotec.com
Zwolle Dresden Nördlingen Stuttgart certified by. History - 1969: Foundation of German Signetics GmbH, test and assembly location, in Nördlingen (Germany) - 1974: Takeover by Philips Semiconductors - 1983:
ATC ATC. Commercial Off The Shelf. Commercial Off-the-Shelf (COTS) High Reliability Certification Program. Applications:
ATC High Reliability Program Commercial Off The Shelf ATC Commercial Off-the-Shelf (COTS) High Reliability Program HB HC HD A Cost Effective approach to qualifying standard products for enhanced reliability
0.08 to 0.31 mils. IC Metal Interconnect. 6 mils. Bond Wire. Metal Package Lead Frame. 40 mils. PC Board. Metal Trace on PC Board 18507
3 PACKAGING Packaging the IC chip is a necessary step in the manufacturing process because the IC chips are small, fragile, susceptible to environmental damage, and too difficult to handle by the IC users.
SMC Corporation of America Quality Manual. ISO9001:2008, revision 15
Quality Manual ISO9001:2008, revision 15 9/23/2014 Approved: Mark Miller, QA Manager 1 PRINTED COPIES ARE UNCONTROLLED Quality Manual Contents: Scan of the SMC ISO Registration Scope of the Quality Management
Guidelines for the management of chemical substances in products
Guidelines for the management of chemical substances in products Version 3.0 Issued on 20th February 2013 Introduction The Guidelines for the Management of Chemical Substances in Products specify common
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Supplier Quality Requirements Manual
Supplier Quality Requirements Manual OPTEK Technology Corporate Headquarters 1645 Wallace Drive Carrollton, TX 75006 Note: The holder of this document is cautioned that the information contained herein
Corporate Quality System Manual. Doc. No.: DOC-35187 Revision 5
Corporate Quality System Manual Doc. No.: DOC-35187 Revision 5 Page 1 of 13 Table of Contents 1 Introduction 1.1 Purpose 1.2 Scope 2 Corporate Overview 2.1 Scope of the QMS 2.2 Overview 3 Management Responsibility
DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control
August 1986 Revised February 1999 DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control General Description The DM74LS191 circuit is a synchronous, reversible, up/ down counter. Synchronous operation
China RoHS Directive Legislation Compliance October 2011
China RoHS Directive compliance information: China RoHS Directive Legislation Compliance October 2011 Declaration & Restriction Scope Packaging Differences to EU RoHS First Catalogue China RoHS2 1 RoHS
SDLS940A MARCH 1974 REVISED MARCH 1988. Copyright 1988, Texas Instruments Incorporated
SN5490A, SN5492A, SN5493A, SN54LS90, SN54LS92, SN54LS93 SN7490A, SN7492A, SN7493A, SN74LS90, SN74LS92, SN74LS93 DECADE, DIVIDE-BY-TWELVE AND BINARY COUNTERS SDLS940A MARCH 1974 REVISED MARCH 1988 PRODUCTION
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Optional Standby Power Generator Systems A. Furnish and install automatic transfer switches
MODULE 7 REFERENCE TO ACCREDITATION AND ADVERTISING
7.1 INTRODUCTION MODULE 7 REFERENCE TO ACCREDITATION AND ADVERTISING All AIHA Laboratory Accreditation Programs (AIHA-LAP), LLC Accredited laboratories are encouraged to advertise their accreditation by
Xilinx Advanced Packaging
Xilinx Advanced Packaging Electronic packages are the interconnect housings for semiconductor devices. They provide electrical interconnections between the IC and the board, and they efficiently remove
Last Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
AN962: Implementing Master-Slave Timing Redundancy in Wireless and Packet- Based Network Applications
AN962: Implementing -Slave Timing Redundancy in Wireless and Packet- Based Network Applications Robust synchronization distribution schemes have historically been essential to communication networks and
Chip-on-board Technology
Hybrid Technology The trend in electronics is to continue to integrate more and more functions and numbers of components into a single, smaller assembly. Hybrid circuit technology is a key method of increasing
Document # 10-0137 Revision R. Quality Assurance Manual
Document # evision Quality Assurance Manual Introduction One of the cornerstones of Maxim's success was and is to deliver the highest quality product technically possible to our customers. On the following
LANSING COMMUNITY COLLEGE 14205.00 TLC BUILDING SERVER ROOM UPGRADES SECTION 013300 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.
SECTION 013300 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 SUMMARY A. Section includes requirements for the submittal schedule and administrative and procedural requirements for submitting Shop Drawings,
THE KOCOUR COMPANY 4800 S. St. Louis Avenue, Chicago, IL 60632
THE KOCOUR COMPANY 4800 S. St. Louis Avenue, Chicago, IL 60632 Metal Finishing Instrumentation, Equipment and Supplies ISO 9001: 2008 QUALITY MANAGEMENT MANUAL ISSUED: 03/01/02(REV. 0) REVISION NO: 4 DATE: