PCN Structure FY 13/14
|
|
|
- Jemima Woods
- 8 years ago
- Views:
Transcription
1 PCN Structure FY 13/14 A PCN FY 13/14 PCN text FY 13/14 QMS FY 12/14 Front End Materials A0101 Process Wafers CZ 150 mm CQT A0102 Process Wafers CZ 200 mm CQT A0103 Process Wafers FZ 150 mm CQT A0104 Process Wafers FZ NTD CQT A0105 Development Wafers (SoI, GaN) CQT A0106 Wafer Reclaim CQI A0107 Test/Monitor Wafers CQI A0108 Process Wafers FZ/MCz 200 mm CQT A0109 Wafers SiC CQT A0110 Process Wafers 300mm CQT A0199 Glass Wafers CQT only for glass wafer if used for product, other CQI A01 Wafers A0201 Targets CQT A0202 Evaporation Materials CQT A0203 Targets & Evaporation Materials - Precious Metal related CQT A0299 Targets, Metallization Materials, other CQI A02 Targets, Evaporation Materials A0301 Photoresists CQI A0302 Developers CQI A0303 Polyimides / permanent resists CQT A0399 Photochem., others CQI A03 Photochemicals A0401 Bulk Gases (only N2, O2, H2, Ar, He) CQI A0402 Cylinder Gases CQI A0403 EPI Gases & CVD Materials CQI A0404 PFC Gases (only C+F Molecules) CQI A0405 Implant Gases CQI A0499 Gases, others DQM A04 Gases A0501 Wet Process Chemicals CQI A0502 Solvents CQI Registergericht: München HRB Page 1
2 A0503 Plating Chemicals CQI A0504 CMP Chemicals CQI A0505 Facility Chemicals DQM A0599 Chemicals, others DQM A05 Chemicals A0601 CMP Pads CQI A0602 CMP Slurries CQI A0699 CMP Materials, others CQI A06 CMP A0799 Masks CQI, but DEK material (screens and stencil) DQM A07 Masks A0801 PreAssembly Tapes CQI A0899 Preassembly Materials, others CQI A08 Preassembly Materials A0999 Rental / Leasing of Onsite Equipment for Gases NSR A09 Rental / Leasing of Facility Mgmt Equipment B Front End & Test Equipment, Spares, Consumables & Maintenance B0101 Eq: Furnaces CQI B0102 Eq: Implant CQI B0103 Eq: Wet CQI B0104 Eq: Lithography CQI B0105 Eq: Metrology / Failure Analysis Equipment CQI B0106 Eq: CVD / PVD / Epi CQI B0107 Eq: Ash / Strip / (Plasma) Etch CQI B0108 Eq: Automation CQI B0109 Eq: Electronic Bench Measurement Equipment DQM B0110 Eq: CMP CQI B0199 Eq: Others DQM B01 FE Equipment B0201 Tester / Prober CQI B0202 Handler CQI B0299 Test & Burn-In Equipment, others CQI B02 Test & Burn-In Equipment B0399 Pre-Assembly CQI B03 Pre-Assembly Equipment B0499 Rental / Leasing of Production-Equipment FE NSR B04 Rental / Leasing of Production-Equipment FE Registergericht: München HRB Page 2
3 B0501 S&C: Furnaces DQM; for critical parts: CQI; to be decided by QM SQI contact B0502 S&C: Implant DQM; for critical parts: CQI; to be decided by QM SQI contact B0503 S&C: Wet DQM; for critical parts: CQI; to be decided by QM SQI contact B0504 S&C: Lithography DQM; for critical parts: CQI; to be decided by QM SQI contact B0505 S&C: Metrology / Failure Analysis Equipment DQM; for critical parts: CQI; to be decided by QM SQI contact B0506 S&C: CVD / PVD / Epi DQM; for critical parts: CQI; to be decided by QM SQI contact B0507 S&C: Ash / Strip / Etch DQM; for critical parts: CQI; to be decided by QM SQI contact B0508 S&C: Automation DQM; for critical parts: CQI; to be decided by QM SQI contact B0509 S&C: Electronic Bench Measurement Equipment DQM; for critical parts: CQI; to be decided by QM SQI contact B0510 S&C: CMP DQM; for critical parts: CQI; to be decided by QM SQI contact B0599 FE Spares & Consumables, others DQM; for critical parts: CQI; to be decided by QM SQI contact B05 FE Spares & Consumables B0601 Maint.: Furnaces DQM B0602 Maint.: Implant DQM B0603 Maint.: Wet DQM B0604 Maint.: Lithography DQM B0605 Maint.: Metrology / Failure Analysis DQM B0606 Maint.: CVD / PVD / Epi DQM B0607 Maint.: Ash / Strip / Etch DQM B0608 Maint.: Automation DQM B0609 Maint.: Electronic Bench Measurement Equipment DQM B0610 Maint.: CMP DQM B0699 FE Maintenance, others DQM B06 FE Maintenance B0701 SCM: Tester / Prober DQM B0702 SCM: Handler DQM B0703 SCM: Probecards CQI B0704 SCM: PCB Boards + Test-Sockets CQI B0799 SCM: Test & Burn-In Equipment, others DQM; for Ink Cartridges: CQI B07 Test & Burn-In Spares & Consumables & Maintenance B0899 SCM: Pre-Assembly DQM; for critical parts: CQI; to be decided by QM SQI contact B08 Spares, Consumables & Maintenance Pre-Assembly C Production Partner Management C0110 SIFO Power 6inch CQS C0111 SIFO Power 8inch CQS C0112 SIFO C5 CQS C0113 SIFO C9 CQS C0114 SIFO C11 CQS C0115 SIFO L90 CQS C0116 SIFO C65 CQS Registergericht: München HRB Page 3
4 C0117 SIFO C40 CQS C0130 SIFO MASK CQS C0199 SIFO Engineering and Other CQS C0261 SIFO TEST SORT CQS C01 Silicon Foundries C0209 Subcon Electroplating Services wo HPS CQS C0220 OSAT ASSY Flipchip CQS C0221 OSAT ASSY BARE DIE CQS C0222 OSAT ASSY BGA (wirebonded) CQS C0223 OSAT ASSY DIP CQS C0224 OSAT ASSY Chipcard CQI C0225 OSAT ASSY High Power CQS C0226 OSAT ASSY DSO CQS C0227 OSAT ASSY QFP CQS C0228 OSAT ASSY SOP CQS C0229 OSAT ASSY QFN / SON CQS C0230 OSAT ASSY WLB CQS C0240 OSAT TK BGA (wirebonded) CQS C0241 OSAT TK DSO CQS C0242 OSAT TK QFN / SON CQS C0243 OSAT TK QFP CQS C0244 OSAT TK TO CQS C0245 OSAT TK Flipchip CQS C0246 OSAT TK DIP CQS C0247 OSAT TK SLP CQS C0260 OSAT T TEST and MSP CQS C0262 OSAT T BI CQS C0270 OSAT BUMPING CQS C0299 OSAT Engineering and Other CQS C02 Assembly & Test Subcontractors C0399 ICs & Chips CQT C03 ICs & Chips C0499 Trading Goods NSR C04 Trading Goods D Assembly & Test Materials D0103 Logic Leadframes CQT D0111 Leadframe_Power_TO CQT D0112 Leadframe_Power_DSO CQT D0113 Leadframe_Power_others CQT D0121 Leadframe_Discrete_leaded CQT D0122 Leadframe_Discrete_leadless CQT Registergericht: München HRB Page 4
5 D0131 Leadframe_Sensors CQT D0199 Leadframes, others CQT D01 Leadframes D0202 Flexible Substrates CQT D0299 Substrates, others CQT D02 Substrates D0301 Encapsulant Power CQT D0302 Encapsulant Discrete CQT D0303 Encapsulant Logic CQT D0304 Encapsulant, others (Sensors, Chipcard, Others) CQT D03 Encapsulants, Mold Compound D0401 Die Attach Materials Power CQT D0402 Die Attach Materials Discrete CQT D0403 Die Attach Materials Logic CQT D0499 Die Attach Materials, others CQT D04 Die Attach Materials D0501 Gold Wire CQT D0599 Bond Wires, others CQT D05 Bond Wires D0611 BE Packing Materials_ Tape CQI D0612 BE Packing Materials_Tube CQI D0613 BE Packing Materials_Tray CQI D0699 BE Packing Materials, others CQI D06 BE Packaging Materials D0701 Ceramic Materials/Packages CQI D0799 Other BE Materials, remaining CQI, CQT only for solder balls and solder paste D07 Other BE Materials D0801 High Power Ceramic Substrates CQT only HPS AG; for Infineon BIP CQI D0802 High Power Housing w/o precious metal CQT only for High Power Housings with injected parts, otherwise CQI D0803 High Power Ceramics CQI D0804 High Power Mold Compound CQI D0805 High Power Driver for IGBT Modules CQI D0806 High Power Diode Chips CQI D0807 High Power Copper Parts, punched CQI D0808 High Power Copper Parts, turned CQI D0809 High Power AISiC baseplates CQI D0810 High Power Modules CQI D0811 High Power Various Stack Assembly parts w/o precious metal CQI D0812 High Power BE Packaging Materials, others DQM Registergericht: München HRB Page 5
6 D0813 Galvanic Services HPS CQI D0999 High Power Specific Backend Materials, w/o precious metal CQI, CQT only for chip related material; to be decided by QM SQI contact D0822 High Power Housing with precious metal CQI D0823 High Power Various Stack Assembly parts with precious metal CQI D9998 High Power Specific Backend Materials, with precious metal CQI, CQT only for chip related material; to be decided by QM SQI contact D08 High Power Specific Backend Materials E Back End Equipment, Spares Consumables & Maintenance E0101 Die Bonding CQI E0102 Wire Bonding CQI E0104 Molding Equipment CQI E0105 Trim & Form, Singulation CQI E0106 Mark, Scan, Pack Equipment CQI E0108 High Power Back End Equipment CQI E0199 Back End Equipment, other DQM E01 Back End Equipment E0289 High Power BE Special Tools, others DQM E0299 Special Tools Backend, others DQM E02 Special Tools Backend E0301 Spares, Consumables & Maintenance BE DQM E0302 Tools & Dies DQM E0303 Bonding Tools, Operating Supply DQM E0311 High Power BE Spares, Consumables & Maintenance DQM E0399 Spares, Consumables & Maintenance BE, others DQM E03 Spares, Consumables & Maintenance BE E0489 Rental/Leasing of High Power BE Equipment, others NSR E0499 Rental / Leasing of Backend Equipment, others NSR E04 Rental / Leasing of Backend Equipment F IT/R&D Demand F0101 Software (Licenses) for IT Operational Services DQM F0102 Software (Licenses) for EDA/CAD (R&D) DQM F0103 Software (Licenses) for manufacturing IT DQM F0104 Software (Licenses) for business application related IT demand DQM F0199 Software (Licenses) e.g. R&D, IP, Libraries, other DQM F01 Software Licenses & IP F0201 SW Maintenance for IT Operational Services DQM F0203 SW Maintenance for manufacturing IT DQM F0204 SW Maintenance for IT Business applications DQM F0299 SW Maintenance for R&D, IP, Libraries, other DQM Registergericht: München HRB Page 6
7 F02 Software Maintenance F0302 IT Operational Services / Operations DQM F0303 Manufacturing IT Services / Projects DQM F0304 Manufacturing IT Services / Operations DQM F0305 IT Business applications Services / Projects DQM F0306 IT Business applications Services / Operations DQM F03 IT Services F0401 Intellectual Capital DQM F0403 Application and System Engineering DQM F0404 Concept Engineering DQM F0405 Digital Design DQM F0406 Mixed Signal & Analog Design DQM F0407 Software Engineering Embedded SW DQM F0408 Design Automation DQM F0409 Product Engineering DQM F0410 Test & Verification Engineering DQM F0411 Quality Engineering DQM F0412 Engineering and Development Support DQM F0414 R&D Services for IP, Libraries DQM F0415 Software Engineering PC SW DQM F04 R&D Services F0501 Clients DQM F0502 Server, Storage DQM F0503 Network DQM F0599 IT Hardware (invest), others DQM F05 IT Hardware (invest) F0601 Office Communication DQM F0602 IT Hardware Maintenance, spare parts and repair DQM F0699 IT Hardware related Services (non-invest), others DQM F06 IT Hardware related Services (non-invest) G Facility Management G0101 Electric Power, free market DQM G0102 Electric Power, state controlled (regulated market) DQM G0199 Energy, others (e.g. incl. Consulting, Contracting) DQM G01 Energy G0201 Rental / Leasing of Building NSR G02 Real Estate G0301 Non-production FM services, regular service (lump-sum payments, repetitive buy) DQM G0302 Non-production FM services, non-regular service (non-repetitive) DQM Registergericht: München HRB Page 7
8 G0399 REM Services, others DQM G03 Non-Production FM Services G0401 Hook-up (Main/Connections) DQM G0489 Hook-up others (additional works) DQM G0501 Services High/Low Voltage DQM G0502 Services Security Equipment DQM G0503 Services Heating- and Air con Systems DQM G0504 Services Water Supply/Disposal Systems DQM G0505 Services Vacuum Systems CQI G0506 Equipment Parts Cleaning DQM G0507 Services Chemical Systems DQM G0508 Services Gas and Compressed Air Systems DQM G0509 Planning and Architectural Services DQM G0599 Production related services, others DQM G05/04 Production FM Services G0403 Construction Services DQM G0699 Facility Invest, others DQM G04/06 Construction and FM Invest G0799 Facility General Purpose Invest (e.g. Furniture, lab equipment) incl. Service DQM G07 Facility General Purpose Invest H Other Indirect Materials & Services H0101 Freight Inbound CQI H0102 Freight Outbound CQI H0103 Contract Logistics CQI H0104 Internal Shipments CQI H0105 Equipment Transports CQI H0199 Logistics, others NSR H01 Logistics H0299 Packing materials, other DQM, Wafer Box + Intimate Packing Materials: CQI H02 Packing materials H0399 Cleanroom Supplies, other CQI: cleanroom, DQM for rest H03 Cleanroom Supplies H0401 Business & Management Consulting NSR H0499 Consulting, others (except IT, R&D) NSR H04 Consulting H0599 Insurances NSR Registergericht: München HRB Page 8
9 H05 Insurances H0601 Temporary Labor Technical DQM H0602 Temporary Labor Adminstrative DQM H0699 Personnel Services, others DQM H06 Personnel Services H0701 Seminars / Trainings DQM H07 Seminars / Trainings H0801 Exhibitions, Trade Shows, Events NSR H0802 Stock Corporation Law Expenses NSR H0899 Advertising costs & other NSR H08 Corporate Services H0999 Boards, other CQI H09 Boards H1003 HR services no H1004 Travel- / Fleetmanagement NSR H1005 Universities NSR H1006 Patent Law / Legal Services NSR H1007 Cooperations NSR H1008 Fees (e.g. local authorities) NSR H1009 Contributions (e.g associations) NSR H1010 Distribution Services, Provisions no H1011 Waste & Recycling NSR H1099 Indirect Materials & Services, others NSR H10 Other Indirect Materials & Services Registergericht: München HRB Page 9
1.Introduction. Introduction. Most of slides come from Semiconductor Manufacturing Technology by Michael Quirk and Julian Serda.
.Introduction If the automobile had followed the same development cycle as the computer, a Rolls- Royce would today cost $00, get one million miles to the gallon and explode once a year Most of slides
SEMI Equipment and Materials Outlook. Daniel Tracy Senior Director Industry Research & Statistics Group at SEMI in San Jose, California
SEMI Equipment and Materials Outlook Daniel Tracy Senior Director Industry Research & Statistics Group at SEMI in San Jose, California Wednesday March 18, 2015 Outline o Fab Investments and Equipment Spending
Good Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
POWER FORUM, BOLOGNA 20-09-2012
POWER FORUM, BOLOGNA 20-09-2012 Convertitori DC/DC ad alta densità di potenza e bassa impedenza termica. Massimo GAVIOLI. Senior Field Application Engineer. Intersil SIMPLY SMARTER Challenges when Designing
Specializing in Open Cavity Packages & Complete IC Assembly Services ISO 9001:2008 Certified and ITAR Registered
TowerJazz Global Symposium Specializing in Open Cavity Packages & Complete IC Assembly Services and TowerJazz Global Symposium Quik-Pak a division of Delphon Industries 2011 Gold Sponsor and TowerJazz
Dry Film Photoresist & Material Solutions for 3D/TSV
Dry Film Photoresist & Material Solutions for 3D/TSV Agenda Digital Consumer Market Trends Components and Devices 3D Integration Approaches Examples of TSV Applications Image Sensor and Memory Via Last
Semi Networking Day Packaging Key for System Integration
Semi Networking Day Packaging Key for System Integration Le Quartz, 75 Cours Emile Zola 69100 Villeurbanne, France Tel : +33 472 83 01 80 - Fax : +33 472 83 01 83 Web: http://www.yole.fr Semi Networking
Internet of Things (IoT) and its impact on Semiconductor Packaging
Internet of Things (IoT) and its impact on Semiconductor Packaging Dr. Nathapong Suthiwongsunthorn 21 November 2014 What is the IoT? From Wikipedia: The Internet of Things (IoT) is the interconnection
Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions
Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions Innovative Wafer & Interconnect Technologies Outline Low cost RFID Tags & Labels Standard applications and
8-bit Atmel Microcontrollers. Application Note. Atmel AVR211: Wafer Level Chip Scale Packages
Atmel AVR211: Wafer Level Chip Scale Packages Features Allows integration using the smallest possible form factor Packaged devices are practically the same size as the die Small footprint and package height
Introduction to VLSI Fabrication Technologies. Emanuele Baravelli
Introduction to VLSI Fabrication Technologies Emanuele Baravelli 27/09/2005 Organization Materials Used in VLSI Fabrication VLSI Fabrication Technologies Overview of Fabrication Methods Device simulation
Chapter 14. Printed Circuit Board
Chapter 14 Printed Circuit Board A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper
Advanced Technologies for System Integration Leveraging the European Ecosystem
Advanced Technologies for System Integration Leveraging the European Ecosystem Presented by Jean-Marc Yannou ASE Europe June 27, 2013 Packaging - Key for System Integration Semi networking day, Porto 1
Advanced Technologies and Equipment for 3D-Packaging
Advanced Technologies and Equipment for 3D-Packaging Thomas Oppert Semicon Russia 15 th May 2014 Outline Short Company Introduction Electroless Plating on Wafer Level Ultra-SB 2 - Wafer Level Solder Balling
Investing in the Air Products Market
Expertise, technology, and gases: A total solution for the global electronics packaging, assembly and test industry Our objective is simple we use our 20+ years of global experience to deliver the expertise,
Dual Integration - Verschmelzung von Wafer und Panel Level Technologien
ERÖFFNUNG DES INNOVATIONSZENTRUMS ADAPTSYS Dual Integration - Verschmelzung von Wafer und Panel Level Technologien Dr. Michael Töpper BDT Introduction Introduction Why do we need such large machines to
DEVELOPMENTS & TRENDS IN FEOL MATERIALS FOR ADVANCED SEMICONDUCTOR DEVICES Michael Corbett mcorbett@linx-consulting.com Semicon Taiwan2015
DEVELOPMENTS & TRENDS IN FEOL MATERIALS FOR ADVANCED SEMICONDUCTOR DEVICES Michael Corbett mcorbett@linx-consulting.com Semicon Taiwan2015 LINX BACKGROUND Linx Consulting 1. We help our clients to succeed
Preface xiii Introduction xv 1 Planning for surface mount design General electronic products 3 Dedicated service electronic products 3 High-reliability electronic products 4 Defining the environmental
Integrated Circuit Packaging and Thermal Design
Lezioni di Tecnologie e Materiali per l Elettronica Integrated Circuit Packaging and Thermal Design Danilo Manstretta microlab.unipv.it danilo.manstretta@unipv.it Introduction to IC Technologies Packaging
Fraunhofer ISIT, Itzehoe 14. Juni 2005. Fraunhofer Institut Siliziumtechnologie (ISIT)
Research and Development centre for Microelectronics and Microsystems Applied Research, Development and Production for Industry ISIT applies an ISO 9001:2000 certified quality management system. Certificate
Ball Grid Array (BGA) Technology
Chapter E: BGA Ball Grid Array (BGA) Technology The information presented in this chapter has been collected from a number of sources describing BGA activities, both nationally at IVF and reported elsewhere
Die Carrier Temporary Reusable Packages. Setting the Standards for Tomorrow
Die Carrier Temporary Reusable Packages Setting the Standards for Tomorrow Die Level Burn-in and Test The Need for KGD Historically, semiconductor manufacturers and endusers performed numerous tests on
How to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
0.08 to 0.31 mils. IC Metal Interconnect. 6 mils. Bond Wire. Metal Package Lead Frame. 40 mils. PC Board. Metal Trace on PC Board 18507
3 PACKAGING Packaging the IC chip is a necessary step in the manufacturing process because the IC chips are small, fragile, susceptible to environmental damage, and too difficult to handle by the IC users.
DirectFET TM - A Proprietary New Source Mounted Power Package for Board Mounted Power
TM - A Proprietary New Source Mounted Power Package for Board Mounted Power by Andrew Sawle, Martin Standing, Tim Sammon & Arthur Woodworth nternational Rectifier, Oxted, Surrey. England Abstract This
CIRCUITS AND SYSTEMS- Assembly and Printed Circuit Board (PCB) Package Mohammad S. Sharawi ASSEMBLY AND PRINTED CIRCUIT BOARD (PCB) PACKAGE
ASSEMBLY AND PRINTED CIRCUIT BOARD (PCB) PACKAGE Mohammad S. Sharawi Electrical Engineering Department, King Fahd University of Petroleum and Minerals Dhahran, 31261 Saudi Arabia Keywords: Printed Circuit
Flip Chip Package Qualification of RF-IC Packages
Flip Chip Package Qualification of RF-IC Packages Mumtaz Y. Bora Peregrine Semiconductor San Diego, Ca. 92121 mbora@psemi.com Abstract Quad Flat Pack No Leads (QFNs) are thermally enhanced plastic packages
Molded. By July. A chip scale. and Omega. Guidelines. layer on the silicon chip. of mold. aluminum or. Bottom view. Rev. 1.
Application Note PAC-006 By J. Lu, Y. Ding, S. Liu, J. Gong, C. Yue July 2012 Molded Chip Scale Package Assembly Guidelines Introduction to Molded Chip Scale Package A chip scale package (CSP) has direct
Grad Student Presentation Topics PHGN/CHEN/MLGN 435/535: Interdisciplinary Silicon Processing Laboratory
Grad Student Presentation Topics 1. Baranowski, Lauryn L. AFM nano-oxidation lithography 2. Braid, Jennifer L. Extreme UV lithography 3. Garlick, Jonathan P. 4. Lochner, Robert E. 5. Martinez, Aaron D.
Welcome & Introduction
Welcome & Introduction Accelerating the next technology revolution Sitaram Arkalgud, PhD Director Interconnect Temporary Bond Workshop SEMICON West July 11, 2011 San Francisco CA Copyright 2008 SEMATECH,
MEMS Processes from CMP
MEMS Processes from CMP MUMPS from MEMSCAP Bulk Micromachining 1 / 19 MEMSCAP MUMPS processes PolyMUMPS SOIMUMPS MetalMUMPS 2 / 19 MEMSCAP Standard Processes PolyMUMPs 8 lithography levels, 7 physical
Chip-on-board Technology
Hybrid Technology The trend in electronics is to continue to integrate more and more functions and numbers of components into a single, smaller assembly. Hybrid circuit technology is a key method of increasing
For Touch Panel and LCD Sputtering/PECVD/ Wet Processing
production Systems For Touch Panel and LCD Sputtering/PECVD/ Wet Processing Pilot and Production Systems Process Solutions with over 20 Years of Know-how Process Technology at a Glance for Touch Panel,
Wafer Level Testing Challenges for Flip Chip and Wafer Level Packages
Wafer Level Testing Challenges for Flip Chip and Wafer Level Packages by Lim Kok Hwa and Andy Chee STATS ChipPAC Ltd. 5 Yishun Street 23, Singapore 768442 kokhwa.lim@statschippac.com; kenghwee.chee@statschippac.com
Failure Analysis (FA) Introduction
Failure Analysis (FA) Introduction (III - Reliability ) Tung-Bao Lu 1 of 23 Reliability Stress Stress Reliability Geberal Condition Temperature Humidity Electrical Others Precondition Baking/L3/Reflowing
Product-group categories
Product-group categories 1. Development 1.1 Development and design 1.2 IT systems/software 1.3 Model making and prototyping 1.4 Tooling and mold making 1.5 Tools 1.6 Semi-finished goods, materials 1.7
Supply Chain Management Services
Supply Chain Management Services Stuttgart Zwolle Nördlingen Dresden certified by RoodMicrotec. RoodMicrotec the leading independent European company for semiconductor testing and quality services. Fields
European bespoke wafer processing & development solutions for : Grinding, CMP, Edge Treatment, Wafer Bonding, Dicing and Cleaning
European bespoke wafer processing & development solutions for : Grinding, CMP, Edge Treatment, Wafer Bonding, Dicing and Cleaning Georges Peyre : Sales & Marketing Director SEMICON Europa Grenoble - 2014
The Internet of Everything or Sensors Everywhere
The Internet of Everything or s Everywhere 2015 This document and the information included herein are proprietary of the China Wafer Level CSP Co., Ltd. Disclosure or reproduction by any media, inclusive
A Manufacturing Technology Perspective of: Embedded Die in Substrate and Panel Based Fan-Out Packages
A Manufacturing Technology Perspective of: Embedded Die in Substrate and Panel Based Fan-Out Packages Bernd K Appelt Director WW Business Development April 24, 2012 Table of Content Definitions Wafer Level
State-of-Art (SoA) System-on-Chip (SoC) Design HPC SoC Workshop
Photos placed in horizontal position with even amount of white space between photos and header State-of-Art (SoA) System-on-Chip (SoC) Design HPC SoC Workshop Michael Holmes Manager, Mixed Signal ASIC/SoC
QPL. Advanced Lead Frame Services From Design to Delivery
QPL Advanced Lead Frame Services From Design to Delivery CORPORATE OVERVIEW Founded in 1982, QPL Limited is a global supplier of lead frames for the semiconductor industry. With headquarters in Hong Kong
Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.
CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity
2009 April 22, Cambridge UK
13.05.2009 1 Astride the Packaging Roadmap Access to Packaging Case Study 2009 April 22, Cambridge UK certified by RoodMicrotec. eltek MilleniumMicrotec Zwolle (NL) Dresden (D) Noerdlingen (D) Stuttgart
Copyright 2008 IEEE. Reprinted from ECTC2008 Proceedings.
Copyright 2008 IEEE. Reprinted from ECTC2008 Proceedings. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Amkor
DESIGN GUIDELINES FOR LTCC
DESIGN GUIDELINES FOR LTCC HERALOCK HL2000 MATERIALS SYSTEM Preliminary Guideline Release 1.0 CONTENTS 1. INTRODUCTION 1.1. GLOSSARY OF TERMS 1.2. LTCC PROCESS FLOW DIAGRAM 1.3. UNITS OF MEASURE 2. PROCESSING
History 02.02.2010. www.roodmicrotec.com
Zwolle Dresden Nördlingen Stuttgart certified by. History - 1969: Foundation of German Signetics GmbH, test and assembly location, in Nördlingen (Germany) - 1974: Takeover by Philips Semiconductors - 1983:
GUIDELINES FOR PRINTED CIRCUIT BOARD ASSEMBLY (PCBA) OF UTAC GROUP S GRID ARRAY PACKAGE (GQFN) AND ITS BOARD LEVEL RELIABILITY
GUIDELINES FOR PRINTED CIRCUIT BOARD ASSEMBLY (PCBA) OF UTAC GROUP S GRID ARRAY PACKAGE (GQFN) AND ITS BOARD LEVEL RELIABILITY Kyaw Ko Lwin*, Daniel Ting Lee Teh, Carolyn Epino Tubillo, Jun Dimaano, Ang
AN900 APPLICATION NOTE
AN900 APPLICATION NOTE INTRODUCTION TO SEMICONDUCTOR TECHNOLOGY INTRODUCTION by Microcontroller Division Applications An integrated circuit is a small but sophisticated device implementing several electronic
IC 1101 Basic Electronic Practice for Electronics and Information Engineering
7. INDUSTRIAL CENTRE TRAINING In the summer between Year 1 and Year 2, students will undergo Industrial Centre Training I in the Industrial Centre (IC). In the summer between Year 2 and Year 3, they will
Vertical Probe Alternative for Cantilever Pad Probing
Robert Doherty Analog Devices, Inc. Robert Rogers Wentworth Laboratories, Inc. Vertical Probe Alternative for Cantilever Pad Probing June 8-11, 8 2008 San Diego, CA USA Introduction This presentation summarizes
Flex Circuits for the ATLAS Pixel Detector
Flex Circuits for the ATLAS Pixel Detector P. Skubic University of Oklahoma Outline ATLAS pixel detector ATLAS prototype Flex hybrid designs Performance simulations Performance measurements Wire bonding
Choosing a Stencil. By William E. Coleman, Ph.D. and Michael R. Burgess
Choosing a Stencil Is a stencil a commodity or a precision tool? A commodity is something that can be purchased from many suppliers, with the expectation that the performance will be the same. A precision
3M Electrically Conductive Adhesive Transfer Tape 9703
Technical Data April 2011 M Electrically Conductive Adhesive Transfer Tape 970 Product Description M Electrically Conductive Adhesive Transfer Tape 970 is a pressure sensitive adhesive (PSA) transfer tape
Comparison of Advanced PoP Package Configurations
Comparison of Advanced PoP Package Configurations By Hamid Eslampour, SeongMin Lee, SeongWon Park, TaeKeun Lee, InSang Yoon, YoungChul Kim STATS ChipPAC Inc. 47400 Kato Rd Fremont, CA 94538 Copyright 2010.
FLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
Digital PCB production usingindustrialinkjetprinting. Roel De Mondt, PhD Productronica Munich 2015
Digital PCB production usingindustrialinkjetprinting Roel De Mondt, PhD Productronica Munich 2015 The whole world becomes digital, well, almost Photo film digital camera Letters emails Books e-readers
A Laboratory Approach to Semiconductor Process Technology
A Laboratory Approach to Semiconductor Process Technology Mary Jane Willis Manufacturing Technology Program Albuquerque TVI, A Community College Albuquerque, New Mexico March, 1998 ABSTRACT The recent
NAICS codes are eligible for EDWOSB contracts.
A code 237210 WOSB Land Subdivision 315210 WOSB Cut and Sew Apparel Contractors 315220 WOSB Men's and Boys' Cut and Sew Apparel Manufacturing 315240 WOSB Women's, Girls', and Infants' Cut and Sew Apparel
Introduction to Photolithography Concepts via printed circuit board (PCB) manufacturing. PCB Background Information (courtesy of Wikipedia)
Introduction to Photolithography Concepts via printed circuit board (PCB) manufacturing Introduction As you saw on the video (http://www.youtube.com/watch?v=9x3lh1zfggm), photolithography is a way to nanomanufacture
Advanced-packaging technologies: The implications for first movers and fast followers
55 Mick Ryan/Getty Images Advanced-packaging technologies: The implications for first movers and fast followers Adoption of 3-D technologies appears inevitable, creating both opportunities and risks. Seunghyuk
Bi-directional FlipFET TM MOSFETs for Cell Phone Battery Protection Circuits
Bi-directional FlipFET TM MOSFETs for Cell Phone Battery Protection Circuits As presented at PCIM 2001 Authors: *Mark Pavier, *Hazel Schofield, *Tim Sammon, **Aram Arzumanyan, **Ritu Sodhi, **Dan Kinzer
Graduate Student Presentations
Graduate Student Presentations Dang, Huong Chip packaging March 27 Call, Nathan Thin film transistors/ liquid crystal displays April 4 Feldman, Ari Optical computing April 11 Guerassio, Ian Self-assembly
Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)
Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / LCMS Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations
Package Trends for Mobile Device
Package Trends for Mobile Device On-package EMI Shield At CTEA Symposium Feb-10, 2015 Tatsuya Kawamura Marketing, Director TEL NEXX, Inc. Love Thinner Mobile? http://www.apple.com/ iphone is registered
Embedding components within PCB substrates
Embedding components within PCB substrates Max Clemons, Altium - March 19, 2014 Continued pressure for electronic devices that provide greater functionality in ever-smaller formfactors is not only providing
Automotive Process Change Notification
Automotive Process Change Notification Date: September 26, 2014 PCN Reference: AU-14-168, D-Pak Leadframe and Bill of Materials (BOM) Product Reference: Automotive Planar Gen5.x and 7.x MOSFETs in D-Pak
Excerpt Direct Bonded Copper
xcerpt irect Bonded Copper Presented by ouglas C. Hopkins, Ph.. 312 Bonner Hall University at Buffalo Buffalo, Y 14620-1900 607-729-9949, fax: 607-729-7129 Authors thank Curamik lectronics A member of
Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M
Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection
Analysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations
Analysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations Hugh Roberts / Atotech USA Inc Sven Lamprecht and Christian Sebald / Atotech Deutschland GmbH Mark Bachman,
FTW 175 VERIZON Wireless Monitoring System Reference Manual Part Number 7911751VERIZON
FTW 175 VERIZON Wireless Monitoring System Reference Manual Part Number 7911751VERIZON SERIAL NUMBER Flash Technology, 332 Nichol Mill Lane, Franklin, TN 37067 (615) 261-2000 Front Matter Abstract This
Xilinx Advanced Packaging
Xilinx Advanced Packaging Electronic packages are the interconnect housings for semiconductor devices. They provide electrical interconnections between the IC and the board, and they efficiently remove
Company Presentation. February 2011. Sustainable Technologies Conference. June 8, 2011
Company Presentation Sustainable Technologies Conference February 2011 June 8, 2011 Disclaimer This presentation contains forward-looking statements relating to the business, financial performance and
MEMS & SENSORS PACKAGING EVOLUTION
MEMS & SENSORS PACKAGING EVOLUTION Presented by Christophe Zinck ASE Group September 26th, 2013 Outline 1. Brief presentation of ASE Group 2. Overview of MEMS packaging 3. ASE MEMS packaging background
Wafer Level Fan-out and Embedded Technology for Potable/Wearable/IoT Devices. Max Lu, Deputy Director, SPIL
Wafer Level Fan-out and Embedded Technology for Potable/Wearable/IoT Devices Max Lu, Deputy Director, SPIL 2 Outline Market Trend & Industry Benchmark KEY Innovative Package Solutions Molded WLCSP Fan-Out
Silicon-On-Glass MEMS. Design. Handbook
Silicon-On-Glass MEMS Design Handbook A Process Module for a Multi-User Service Program A Michigan Nanofabrication Facility process at the University of Michigan March 2007 TABLE OF CONTENTS Chapter 1...
Solder Reflow Guide for Surface Mount Devices
June 2015 Introduction Technical Note TN1076 This technical note provides general guidelines for a solder reflow and rework process for Lattice surface mount products. The data used in this document is
Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / Grenoble)
Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations
GaN IC Die Handling, Assembly and Testing Techniques
GaN IC Die Handling, Assembly and Testing Techniques Page 1 of 9 1. Scope This document describes the storage and handling requirements for GaN IC chips. It also describes recommended assembly and testing
Flex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
Investigation of Components Attachment onto Low Temperature Flex Circuit
Investigation of Components Attachment onto Low Temperature Flex Circuit July 2013 Q. Chu, N. Ghalib, H. Ly Agenda Introduction to MIRA Initiative MIRA Manufacturing Platforms Areas of Development Multiphase
MULTI-FLEX CIRCUITS AUSTRALIA. International Suppliers of PRINTED CIRCUIT BOARDS
MULTI-FLEX CIRCUITS AUSTRALIA International Suppliers of PRINTED CIRCUIT BOARDS AUSTRALIA Multi-Flex Circuits Australia Leading suppliers of HIGH QUALITY PRINTED CIRCUIT BOARDS for every purpose OUR COMMITMENT
IBS - Ion Beam Services
IBS - Ion Beam Services Profile Technologies Devices & sensor fabricat ion Participation to R&D programs Researched partnership Présentation activité composant 1 Profile : Products and services Product
CASE STUDY: SCREEN PRINTING SOLUTIONS FOR SMALL DIE & PRECISION ALIGNMENT CHALLENGES
CASE STUDY: SCREEN PRINTING SOLUTIONS FOR SMALL DIE & PRECISION ALIGNMENT CHALLENGES By William E. Coleman Ph.D., Photo Stencil and Travis Tanner, Plexus Manufacturing Solutions When you have a gold Kovar
CHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS
CHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS 5.1 INTRODUCTION The manufacturing plant considered for analysis, manufactures Printed Circuit Boards (PCB), also called Printed Wiring Boards (PWB), using
Adapters - Overview. Quick-Turn Solutions for IC Supply Issues
Adapters - Overview BGA to BGA Adapter BGA to PGA BGA to QFP BGA to BGA QFP to BGA SMT to DIP SMT to SMT PGA to PGA BGA to QFP Adapter with VR using FlexFrame Interconnect TSOP Adapter Packaged Die to
HOT BAR REFLOW SOLDERING FUNDAMENTALS. A high quality Selective Soldering Technology
HOT BAR REFLOW SOLDERING FUNDAMENTALS A high quality Selective Soldering Technology Content 1. Hot Bar Reflow Soldering Introduction 2. Application Range 3. Process Descriptions > Flex to PCB > Wire to
K&S to Acquire Assembléon Transaction Overview
K&S to Acquire Assembléon Transaction Overview Safe Harbor Statement In addition to historical statements, this presentation and oral statements made in connection with it may contain statements relating
Semiconductor design Outsourcing: Global trends and Indian perspective. Vasudevan A Date: Aug 29, 2003
Semiconductor design Outsourcing: Global trends and Indian perspective Vasudevan A Date: Aug 29, 2003 Role of Semiconductors in Products Source: IC Insights Semiconductor content in end product increasing
Outsourcing Test What are the most valuable engagement periods?
Outsourcing Test What are the most valuable engagement periods? By Mark Berry Vice President US IDM Accounts, Test Sales & Business Development Manager Gerard John Technical Director Worldwide Test Development
Designing with High-Density BGA Packages for Altera Devices
2014.12.15 Designing with High-Density BGA Packages for Altera Devices AN-114 Subscribe As programmable logic devices (PLDs) increase in density and I/O pins, the demand for small packages and diverse
Results Overview Wafer Edge Film Removal using Laser
Results Overview Wafer Edge Film Removal using Laser LEC- 300: Laser Edge Cleaning Process Apex Beam Top Beam Exhaust Flow Top Beam Scanning Top & Top Bevel Apex Beam Scanning Top Bevel, Apex, & Bo+om
easytouch Projected capacitive touch for industrial applications Version: July 2013
easytouch Projected capacitive touch for industrial applications Version: July 2013 WHAT IS easytouch is a projected capacitive touch (PCAP/PCT) solution, developed and manufactured by DATA MODUL easytouch
ECP Embedded Component Packaging Technology
ECP Embedded Component Packaging Technology A.Kriechbaum, H.Stahr, M.Biribauer, N.Haslebner, M.Morianz AT&S Austria Technologie und Systemtechnik AG Abstract The packaging market has undergone tremendous
SiP & Embedded Passives ADEPT-SiP Project
System-in-Package () and the ADEPT- Project David Pedder TWI Ltd, Granta Park, Great Abington, Cambridge Copyright 2006 ADEPT- & Embedded Passives ADEPT- Project Objectives Programme Partners ADEPT- Architecture
Non-Contact Test Access for Surface Mount Technology IEEE 1149.1-1990
Non-Contact Test Access for Surface Mount Technology IEEE 1149.1-1990 ABSTRACT Mechanical and chemical process challenges initially limited acceptance of surface mount technology (SMT). As those challenges
Introduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
ILS Technology. Solutions for Manufacturing Intelligence and Secure Collaboration. December, 2005
ILS Technology Solutions for Manufacturing Intelligence and Secure Collaboration December, 2005 Copyright, 2004. ILS Technology, ll Rights Reserved. Design For Manufacturing Requirements: Our industry
Fraunhofer IZM Berlin
Fraunhofer IZM Berlin Entwicklungstrends im LED Packaging Dr. Rafael Jordan SIIT Agenda Chip on Board Gluing Soldering Sintering Transient Liquid Phase Bonding/Soldering Junction Temperature Measurements
From sand to circuits How Intel makes integrated circuit chips. Sand with Intel Core 2 Duo processor.
www.intel.com Learn more about Intel history at www.intel.com/museum Copyright 2008 Intel Corporation. All rights reserved. Intel, Intel logo, Celeron, Intel386, Intel486, i386, i486, Intel Core, Intel