LOW DROPOUT VOLTAGE REGULATOR
|
|
|
- Bennett Stone
- 9 years ago
- Views:
Transcription
1 LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM884/A is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. It delivers up to V/mA output power with the maximum input voltage of V. The NJM884/A is suitable for audio/video and PC related applications. The U suffix product achieves high P D compared with U although the same package outline (SOT-89-). PACKAGE OUTLINE NJM884U/U NJM884ADL NJM884AKH(...97mm) FEATURES High Ripple Rejection 7dB typ. (f=khz, Vo=V Version) Low Output Noise Voltage Vno=4µVrms typ. Output capacitor with.µf ceramic capacitor (Vo.7V) Output Current Io(max.)=mA High Precision Output Vo±.% Low Dropout Voltage.8V typ. (Io=mA) ON/OFF Control Function Internal Thermal Overload Protection Internal Short Circuit Current Limit Bipolar Technology Package Outline SOT-89-(NJM884U/U)/ TO--(NJM884ADL)/ ESON6-H(NJM884AKH) PIN CONFIGURATION 4. CONTROL. CONTROL. GND N.C. 4.. N.C.. GND NJM884U/U NJM884ADL NJM884AKH Exposed Pad connected to GND.. NC. GND 4. CONTROL. NC 6. EQUIVALENT CIRCUIT CONTROL Thermal Protection Bandgap Reference GND Ver
2 OUTPUT VOLTAGE RANK LIST The WHITE column shows applicable Voltage Rank(s) Device Name V out Device Name V out NJM884U/U-.V NJM884U-4.4V NJM884U-6.6V NJM884U-.V NJM884U-7.7V NJM884U-6.6V NJM884U/U-8.8V NJM884U-7.7V NJM884U-9.9V NJM884U-8.8V NJM884U-.V NJM884U-9.9V NJM884U-.V NJM884U-4 4.V NJM884U-.V NJM884U-4 4.V NJM884U-.V NJM884U-4 4.V NJM884U-4.4V NJM884U-4 4.V NJM884U-.V NJM884U V NJM884U/U-.V NJM884U-4 4.V NJM884U-6.6V NJM884U V NJM884U-7.7V NJM884U V NJM884U-8.8V NJM884U V NJM884U-9.9V NJM884U V NJM884U-.V NJM884U/U-.V NJM884U-.V NJM884U-.V NJM884U-.V Device Name V out Device Name V out NJM884ADL-.V NJM884ADL-.V NJM884ADL-6.6V NJM884ADL-6.6V NJM884ADL-7.7V NJM884ADL-7.7V NJM884ADL-8.8V NJM884ADL-8.8V NJM884ADL-9.9V NJM884ADL-9.9V NJM884ADL-.V NJM884ADL-4 4.V NJM884ADL-.V NJM884ADL-4 4.V NJM884ADL-.V NJM884ADL-4 4.V NJM884ADL-.V NJM884ADL-4 4.V NJM884ADL-4.4V NJM884ADL V NJM884ADL-.V NJM884ADL-4 4.V NJM884ADL-6.6V NJM884ADL V NJM884ADL-7.7V NJM884ADL V NJM884ADL-8.8V NJM884ADL V NJM884ADL-9.9V NJM884ADL V NJM884ADL-.V NJM884ADL-.V NJM884ADL-.V NJM884AU-.V NJM884ADL-.V NJM884ADL-.V NJM884ADL-4.4V - - Ver.-7-
3 Device Name V out Device Name V out NJM884AKH-.V NJM884AKH-.V NJM884AKH-6.6V NJM884AKH-6.6V NJM884AKH-7.7V NJM884AKH-7.7V NJM884AKH-8.8V NJM884AKH-8.8V NJM884AKH-9.9V NJM884AKH-9.9V NJM884AKH-.V NJM884AKH-4 4.V NJM884AKH-.V NJM884AKH-4 4.V NJM884AKH-.V NJM884AKH-4 4.V NJM884AKH-.V NJM884AKH-4 4.V NJM884AKH-4.4V NJM884AKH V NJM884AKH-.V NJM884AKH-4 4.V NJM884AKH-6.6V NJM884AKH V NJM884AKH-7.7V NJM884AKH V NJM884AKH-8.8V NJM884AKH V NJM884AKH-9.9V NJM884AKH V NJM884AKH-.V NJM884AKH-.V NJM884AKH-.V NJM884AKH-.V NJM884AKH-.V NJM884AKH-4.4V Ver
4 ABSOLUTE MAXIMUM RATINGS (Ta= C) PARAMETER SYMBOL RATINGS UNIT Input Voltage + V Control Voltage V CONT + V SOT-89- (U) 6(*) 96(*) Power Dissipation P D SOT-89- (U) 6(*) 4(*) TO-- 9(*) (*) mw ESON6-H 44(*) (*4) Operating Temperature Topr C Storage Temperature Tstg C (*): Mounted on glass epoxy board. (76. x4. x.6mm:based on EIA/JDEC standard size, Layers, Cu area mm ) (*): Mounted on glass epoxy board. (76. x 4. x.6mm:based on EIA/JDEC standard, 4Layers) ( 4Layers: Applying mm inner Cu area and a thermal via hall to a board based on JEDEC standard JESD-) (*): Mounted on glass epoxy board (. 4..6mm: based on EIA/JEDEC standard, Layers FR-4, with Exposed Pad) (*4): Mounted on glass epoxy board (. 4..6mm: based on EIA/JEDEC standard, 4Layers FR-4, with Exposed Pad) (4Layers: Applying mm inner Cu area and a thermal via hole to a board based on JEDEC standard JESD-) INPUT VOLTAGE RANGE =+.V~9V In case of Vo<.V ELECTRICAL CHARACTERISTICS ( =Vo+V, C IN =.µf, Co=.µF: Vo.7V (Co=4.7µF :.7V<Vo.6V, Co=µF : Vo.7V), Ta= C) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Output Voltage Vo Io=mA -.% +.% V Quiescent Current I Q Io=mA µa Quiescent Current at Control OFF I Q(OFF) V CONT =V na Output Current Io Vo -.V 6 ma Line Regulation Vo/ =Vo+V Vo+6V (Vo V Version), =Vo+V 9V (Vo>V Version),. %/V Io=mA Load Regulation Vo/ Io Io= ma.9 %/ma Dropout Voltage (*) V I-O Io=mA.8.8 V Ripple Rejection Average Temperature Coefficient of Output Voltage RR ein=mvrms, f=khz, Io=mA, Vo=V Version 7 db Vo/ Ta Ta= +8 C, Io=mA ± ppm/ C Output Noise Voltage V NO f=hz 8kHz, Io=mA, Vo=V Version 4 µvrms Control Current I CONT V CONT =.6V µa Control Voltage for ON-state V CONT(ON).6 V Control Voltage for OFF-state V CONT(OFF).6 V (*): The output voltage excludes under.v. The above specification is a common specification for all output voltages. Therefore, it may be different from the individual specification for a specific output voltage Ver.-7-
5 POWER DISSIPATION vs. AMBIENT TEMPERATURE Power Dissipation P D (mw) NJM884U/U Power Dissipation (Topr=-4~+8 C,Tj= C) U : on 4 layers board U : on 4 layers board U/U : on layers board Temperature : Ta( C) Power Dissipation P D (mw) NJM884ADL PowerDissipation (Topr=-4~+8 C,Tj= C) on 4 layers board on layers board Temperature : Ta( C) NJM884AKH Power Dissipation (Topr=-4~+8 C,Tj= C) Power Dissipation P D (mw) 9 6 on 4 layers board with Exposed Pad on layers board with Exposed Pad Temperature : Ta( C) Ver
6 TEST CIRCUIT A I IN.µF NJM884/A (*6).µF (Ceramic) I OUT V A I CONT CONTROL V V CONT GND (*6).7<Vo.6V version: Co=4.7µF (Ceramic) Vo.7V version: Co=µF (Ceramic) TYPICAL APPLICATION In the case where ON/OFF Control is not required:.µf NJM884/A (*7).µF R (~kω) CONTROL GND (*7).7<Vo.6V version: Co=4.7µF Vo.7V version: Co=µF Ver.-7-
7 In use of ON/OFF CONTROL:.µF NJM884/A (*8).µF R CONTROL GND (*8).7<Vo.6V version: Co=4.7µF Vo.7V version: Co=µF State of control terminal: H output is enabled. L or open output is disabled. *In the case of using a resistance "R" between and control. If this resistor is inserted, it can reduce the control current when the control voltage is high. The applied voltage to control terminal should set to consider voltage drop through the resistor R and the minimum control voltage for ON-state. The V CONT (ON) and I CONT have temperature dependence as shown in the "Control Current vs. Temperature" and " Control Voltage vs. Temperature" characteristics. Therefore, the resistance "R" should be selected to consider the temperature characteristics. Ver
8 *Input Capacitor C IN Input Capacitor C IN is required to prevent oscillation and reduce power supply ripple for applications when high power supply impedance or a long power supply line. Therefore, use the recommended C IN value (refer to conditions of ELECTRIC CHARACTERISTIC) or larger and should connect between GND and as shortest path as possible to avoid the problem. *Output Capacitor C O Output capacitor (C O ) will be required for a phase compensation of the internal error amplifier. The capacitance and the equivalent series resistance (ESR) influence to stable operation of the regulator. Use of a smaller C O may cause excess output noise or oscillation of the regulator due to lack of the phase compensation. On the other hand, Use of a larger C O reduces output noise and ripple output, and also improves output transient response when rapid load change. Therefore, use the recommended C O value (refer to conditions of ELECTRIC CHARACTERISTIC) or larger and should connect between GND and as shortest path as possible for stable operation The recommended capacitance depends on the output voltage rank. Especially, low voltage regulator requires larger C O value. In addition, you should consider varied characteristics of capacitor (a frequency characteristic, a temperature characteristic, a DC bias characteristic and so on) and unevenness peculiar to a capacitor supplier enough. When selecting C O, recommend that have withstand voltage margin against output voltage and superior temperature characteristic Ver.-7-
9 TYPICAL CHARACTERISTICS. NJM884_.V Output Voltage vs. Input Voltage 4 NJM884_.V Output Voltage vs. Output Current. Co=.µF. VIN=4.V Co=.µF Output Voltage : Vo(V).9.8 Io=mA Io=mA Output Voltage : Vo(V).. Io=mA Input Voltage : VIN(V) Output Current : Io(mA) NJM884_.V Ground Pin Current vs. Output Current VIN=4.V.. NJM884_.V Dropout Voltage vs. Output Current Ground Pin Current : IGND (ma) Dropout Voltage:dVI-O (V) Output Current : IO(mA) Output Current:Io(mA) 4 NJM884_.V Output Voltage vs. Control Voltage. Output Voltage : Vo(V).. Rc=Ω Rc=kΩ Rc=kΩ. VIN=4.V Co=. µf(ceramic) Io=mA... Control Voltage : V (V) Cont Ver
10 TYPICAL CHARACTERISTICS NJM884_.V Load Regulation vs. Output Current NJM884_.V Peak Output Current vs. Input Voltage - Load Regulation : dvo/dio(mv) VIN=4.V Output Current : Io(mA) Peak Output Current : IoMAX(mA) Input Voltage : VIN(V) Quiescent Current : IQ (µa) NJM884_.V Quiescent Current vs. Input Voltage Output is open. including Icont Output Noise Voltage : Vn(uVrms) NJM884_.V Output Noise Voltage vs. Output Current VIN=4.V LPF:8kHz Co=.µF(ceramic) Input Voltage : VIN(V)... Output Current : Io(mA) NJM884_.V Ripple Rejection Ratio vs. Frequency NJM884_.V Ripple Rejection vs. Output Current 9 Io=mA 9 f=khz Ripple Rejection Ratio : RR (db) Io=mA Io=mA Io=mA VIN=4.V ein=mvrms k k 4 k Frequency : f (Hz) Ripple Rejection : RR (db) f=khz VIN=4.V ein=mvrms... Output Current : Io(mA) - - Ver.-7-
11 TYPICAL CHARACTERISTICS Equivalent Serise Resistance : ESR ( Ω ). NJM884_.V Equivalent Serise Resistance vs. Output Current VIN=4.V STABLE REGION.... Output Current : Io(mA) Dropout Voltage : dv I-O (V) NJM884_.V Dropout Voltage vs. =ma - NJM884_.V Control Voltage vs. Io=mA. NJM884_.V Output Voltage vs. Temperature Control Voltage :Vcont-off (V).. Output Voltage : Vo(V)..9 Io=mA Co=.µF.9 - NJM884_.V Output Peak Current vs. Temperature NJM884_.V Quiescent Current vs. Temperature Output Peak Current : Io_peak (ma) 8 6 Co=. µf(ceramic) - Quiescent Current : IQ (µa) including Output is open. Co=.µF - Ver
12 TYPICAL CHARACTERISTICS. NJM884_.V Line Regulation vs. Io=mA.. NJM884_.V Load Regulation vs. Io=-mA Line Regulation : dvo/dvin(%/v). -. Load Regulation : dvo/dio(%/a) NJM884.V Output Voltage vs. Temperature 4 NJM884_.V Short Circuit Current vs. VIN=4.V Output Voltage : Vo(V).. Short Circuit Current : Isc Io=mA Ver.-7-
13 TYPICAL CHARACTERISTICS NJM884_.V ON/OFF Transient Response NJM884_.V ON/OFF Transient Response Without Load Control Voltage 6 Control Voltage Output Voltage : Vo [V] 4 Output Voltage VIN=4.V Io=mA Control Voltage : Vo [V] Output Voltage : Vo [V] 4 Output Voltage VIN=4.V Io=mA Control Voltage : Vo [V] Time : t [ms] Time : t [ms]. NJM884_.V Load Transient Response. NJM884_.V Line Transient Response 8.4 Output Current.4 7 Output Voltage : Vo [V]....9 Output Voltage VIN=4.V Output Current : Io [ma] Output Voltage : Vo [V] Input Voltage Output Voltage VIN=4.V Co=. µf(ceramic) lo=ma 6 4 Input Voltage : [V] Time : t [ µs] Time : t [ µs ] [CAUTION] The specifications on this databook are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. Ver
NJM2068 LOW-NOISE DUAL OPERATIONAL AMPLIFIER
LOW-NOISE DUAL OPERATIONAL AMPLIFIER NJM26 GENERAL DESCRIPTION The NJM26 is a high performance, low noise dual operational amplifier. This amplifier features popular pin-out, superior noise performance,
MC78XX/LM78XX. 3-terminal 1A positive voltage regulator. Features. Description. Internal Block Digram. www.fairchildsemi.com
www.fairchildsemi.com 3-terminal 1A positive voltage regulator Features Current up to 1A Voltages of 5, 6, 8, 9, 10, 11, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Transistor
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
MUSES8920. High Quality Audio J-FET Input Dual Operational Amplifier - 1 -
MUSES89 High Quality Audio J-FET Input Dual Operational Amplifier GENERAL DESCRIPTION The MUSES89 is a high quality Audio J-FET input dual operational amplifier. This is a mass production model of MUSES
High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338
High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338 FEATURES High accuracy over line and load: ±.8% @ 25 C, ±1.4% over temperature Ultralow dropout voltage: 19 mv (typ) @ 1 A Requires
PQ05RD11 Series/PQ3RD13
Low Power-Loss oltage Regulators PQ5RD Series/PQRD PQ5RD Series/PQRD A Output, General Purpose Low Power-loss oltage Regulators Features Low power-loss(dropout voltage : MAX..5 at Io=.5A) Line-up for.,
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply
High Accuracy, Ultralow IQ, 1.5 A, anycap Low Dropout Regulator ADP3339
Data Sheet High Accuracy, Ultralow IQ,.5 A, anycap Low Dropout Regulator FEATURES FUNCTIONAL BLOCK DIAGRAM High accuracy over line and load: ±.9% at 5 C, ±.5% over temperature Ultralow dropout voltage:
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
5.5 V Input, 300 ma, Low Quiescent Current, CMOS Linear Regulator ADP122/ADP123
Data Sheet 5.5 V Input, 3 ma, Low Quiescent Current, CMOS Linear Regulator ADP/ADP3 FEATURES Input voltage supply range:.3 V to 5.5 V 3 ma maximum output current Fixed and adjustable output voltage versions
LM741. Single Operational Amplifier. Features. Description. Internal Block Diagram. www.fairchildsemi.com
Single Operational Amplifier www.fairchildsemi.com Features Short circuit protection Excellent temperature stability Internal frequency compensation High Input voltage range Null of offset Description
AS2815. 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response
1.5A Low Dropout oltage Regulator Adjustable & Fixed Output, Fast Response FEATURES Adjustable Output Down To 1.2 Fixed Output oltages 1.5, 2.5, 3.3, 5.0 Output Current of 1.5A Low Dropout oltage 1.1 Typ.
unit : mm With heat sink (see Pd Ta characteristics)
Ordering number: EN1321E Monolithic Linear IC LA4261 3.5 W 2-Channel AF Power Amplifier for Home Stereos and Music Centers Features. Minimum number of external parts required (No input capacitor, bootstrap
LM2941/LM2941C 1A Low Dropout Adjustable Regulator
LM2941/LM2941C 1A Low Dropout Adjustable Regulator General Description The LM2941 positive voltage regulator features the ability to source 1A of output current with a typical dropout voltage of 0.5V and
TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION
TDA2822 DUAL POER AMPLIFIER SUPPLY VOLTAGE DON TO 3 V. LO CROSSOVER DISTORSION LO QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION DESCRIPTION The TDA2822 is a monolithic integrated circuit in 12+2+2 powerdip,
PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
1.0A LOW DROPOUT LINEAR REGULATOR
1.0A LOW DROPOUT LINEAR REGULATOR Description Pin Assignments The is a low dropout three-terminal regulator with 1.0A output current ability, and the dropout voltage is specified at typical 1.1V at 1.0A
CE8301 Series. Introduction. Features. Ordering Information. Applications SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER
SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER Introduction The is a CMOS PFM-control step-up switching DC/DC converter that mainly consists of a reference voltage source, an oscillator, and a comparator.
MC78XX/LM78XX/MC78XXA
3-Terminal 1A Positive oltage Regulator www.fairchildsemi.com Features Output Current up to 1A Output oltages of 5, 6, 8, 9, 10, 12, 15, 18, 24 Thermal Overload Protection Short Circuit Protection Output
ADJUSTABLE VOLTAGE AND CURRENT REGULATOR
L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)
KIA7805AF/API~KIA7824AF/API SEMICONDUCTOR TECHNICAL DATA THREE TERMINAL POSITIVE VOLTAGE REGULATORS 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, 24V.
SEMICONDUCTOR TECHNICAL DATA KIA785AF/API~KIA7824AF/API BIPOLAR LINEAR INTEGRATED THREE TERMINAL POSITIVE VOLTAGE REGULATORS 5V, 6V, 7V, 8V, 9V, 1V, 12V, 15V, 18V, 2V, 24V. FEATURES Internal Thermal Overload
L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
KA79XX/KA79XXA. 3-Terminal 1A Negative Voltage Regulator. Features. Description. Internal Block Digram. www.fairchildsemi.com
3-Terminal 1A Negative oltage Regulator www.fairchildsemi.com Features Output Current in Excess of 1A s of -5, -6, -8, -9, -12, -15, -18, -24 Internal Thermal Overload Protection Short Circuit Protection
L7800 SERIES POSITIVE VOLTAGE REGULATORS
SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5 A OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9; 12; 15; 18; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSITION SOA PROTECTION
unit:mm 3049A-SIP12H 8.4 7.0
Ordering number:enn1277e Monolithic Linear IC LA4445 5.5W 2-Channel AF Power Amplifier Features Dual channels. Output : 5.5W 2 (typ.) Minimun number of external parts required. Small pop noise at the time
FAN8082 (KA3082N) Bi-directional DC Motor Driver. Features. Description. Typical Applications. Ordering Information. www.fairchildsemi.
Bi-directional DC Motor Driver www.fairchildsemi.com Features Built-in brake function for stable brake characteristics. Built-in element to absorb a surge current derived from changing motor direction
Rail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails
High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
NJW4841-T1. 1-channel Switching Gate Driver
NJW8-T -channel Switching Gate Driver GENERAL DESCRIPTION The NJW8 is a High Speed Switching Gate Driver that is applicable A peak current. The NJW8 features are Withstand voltage of, recommended operating
Kit 27. 1W TDA7052 POWER AMPLIFIER
Kit 27. 1W TDA7052 POWER AMPLIFIER This is a 1 watt mono amplifier Kit module using the TDA7052 from Philips. (Note, no suffix.) It is designed to be used as a building block in other projects where a
INTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET TDA7052 1 W BTL mono audio amplifier File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL)
INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
unit:mm 3022A-DIP12F 0.5 0.81 2.54
Ordering number:enn1718b Monolithic Linear IC LA4550 2-Channel AF Power Amplifier for Radio, Tape Recorder Use Features Low quiescent current. On-chip 2 channels permitting use in stereo and bridge amplifier
FEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT2248 Infrared Remote Control Transmitter
Infrared Remote Control Transmitter DESCRIPTION PT2248 is an infrared remote control transmitter utilizing CMOS Technology. It is capable of 18 functions and a total of 75 commands. Single-shot and continuous
Features. Ordering Information. * Underbar marking may not be to scale. Part Identification
MIC86 Teeny Ultra Low Power Op Amp General Description The MIC86 is a rail-to-rail output, input common-mode to ground, operational amplifier in Teeny SC7 packaging. The MIC86 provides 4kHz gain-bandwidth
L4940 series VERY LOW DROP 1.5 A REGULATORS
L4940 series VERY LOW DROP 1.5 A REGULATORS PRECISE 5 V, 8.5 V, 10 V, 12 V OUTPUTS LOW DROPOUT VOLTAGE (500 typ at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY
LM217M, LM317M. Medium current 1.2 to 37 V adjustable voltage regulator. Description. Features
Medium current 1.2 to 37 V adjustable voltage regulator Datasheet - production data Description The LM217M and LM317M are monolithic integrated circuits in DPAK package used as positive adjustable voltage
UNISONIC TECHNOLOGIES CO.,LTD
TDA UNISONIC TECHNOLOGIES CO.,LTD +W STEREO AMPLIFIER FOR CAR RADIO DESCRIPTION The UTC TDA is a class B dual audio power amplifier and is designed for car radio applications. HZIP-11 FEATURES * Low distortion.
Programmable Single-/Dual-/Triple- Tone Gong SAE 800
Programmable Single-/Dual-/Triple- Tone Gong Preliminary Data SAE 800 Bipolar IC Features Supply voltage range 2.8 V to 18 V Few external components (no electrolytic capacitor) 1 tone, 2 tones, 3 tones
Understanding the Terms and Definitions of LDO Voltage Regulators
Application Report SLVA79 - October 1999 Understanding the Terms and Definitions of ltage Regulators Bang S. Lee Mixed Signal Products ABSTRACT This report provides an understanding of the terms and definitions
TL783C, TL783Y HIGH-VOLTAGE ADJUSTABLE REGULATOR
HIGH-VOLTAGE USTABLE REGULATOR SLVS36C SEPTEMBER 1981 REVISED APRIL 1997 Output Adjustable From 1.25 V to 125 V When Used With an External Resistor Divider 7-mA Output Current Full Short-Circuit, Safe-Operating-Area,
L78M00 SERIES POSITIVE VOLTAGE REGULATORS. www.tvsat.com.pl
SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT TO 0.5A OUTPUT VOLTAGES OF 5; 6; 8; 9; 10; 12; 15; 18; 20; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSISTOR SOA PROTECTION DESCRIPTION
DATA SHEET. TDA1518BQ 24 W BTL or 2 x 12 watt stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The is an integrated class-b output amplifier in a 13-lead single-in-line (SIL) plastic power package.
LM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT
LF00AB/C SERIES ERY LOW DROP OLTAGE REGULATORS WITH INHIBIT ERY LOW DROPOUT OLTAGE (5) ERY LOW QUIESCENT CURRENT (TYP. 50 µa IN OFF MODE, 500µA INON MODE) OUTPUT CURRENT UP TO 500 ma LOGIC-CONTROLLED ELECTRONIC
LM337. Three-terminal adjustable negative voltage regulators. Features. Description
Three-terminal adjustable negative voltage regulators Datasheet - production data current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional
DATA SHEET. TDA1543 Dual 16-bit DAC (economy version) (I 2 S input format) INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 February 1991 FEATURES Low distortion 16-bit dynamic range 4 oversampling possible Single 5 V power supply No external components required
DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET 24 W BTL or 2 x 12 W stereo car radio File under Integrated Circuits, IC01 January 1992 GENERAL DESCRIPTION The is a class-b integrated output amplifier encapsulated in a
LM1117/LM1117I 800mA Low-Dropout Linear Regulator
LM1117/LM1117I 800mA Low-Dropout Linear Regulator General Description The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2 at 800mA of load current. It has the same pin-out as
LM3940 1A Low Dropout Regulator for 5V to 3.3V Conversion
1A Low Dropout Regulator for 5V to 3.3V Conversion General Description The LM3940 is a 1A low dropout regulator designed to provide 3.3V from a 5V supply. The LM3940 is ideally suited for systems which
5A LOW DROPOUT LINEAR REGULATOR General Description. Features. Applications
General Description The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting which provides protection
400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter
Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable
LM79XX Series 3-Terminal Negative Regulators
LM79XX Series 3-Terminal Negative Regulators General Description The LM79XX series of 3-terminal regulators is available with fixed output voltages of b5v b8v b12v and b15v These devices need only one
LM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
Symbol Parameter Value Unit V i-o Input-output Differential Voltage 40 V I O Output Current Intenrally Limited Top
LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE : 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 1.5A 0.1% LINE AND LOAD REGULATION FLOATING OPERATION FOR HIGH VOLTAGES COMPLETE SERIES OF PROTECTIONS
Low Cost Instrumentation Amplifier AD622
Data Sheet FEATURES Easy to use Low cost solution Higher performance than two or three op amp design Unity gain with no external resistor Optional gains with one external resistor (Gain range: 2 to 000)
UC3842/UC3843/UC3844/UC3845
SMPS Controller www.fairchildsemi.com Features Low Start up Current Maximum Duty Clamp UVLO With Hysteresis Operating Frequency up to 500KHz Description The UC3842/UC3843/UC3844/UC3845 are fixed frequencycurrent-mode
1.5A Very L.D.O Voltage Regulator LM29150/29151/29152
FEATURES High Current Capability 1.5A Low Dropout Voltage 350mV Low Ground Current Accurate 1% Guaranteed Initial Tolerance Extremely Fast Transient Response Reverse-Battery and "Load Dump" Protection
Obsolete Product(s) - Obsolete Product(s)
32 W hi-fi audio power amplifier Features High output power (50 W music power IEC 268.3 rules) High operating supply voltage (50 V) Single or split supply operations Very low distortion Short-circuit protection
Precision, Unity-Gain Differential Amplifier AMP03
a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation
Features. Symbol JEDEC TO-220AB
Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching
LM78XX Series Voltage Regulators
LM78XX Series Voltage Regulators General Description Connection Diagrams The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range
LM380 Audio Power Amplifier
LM380 Audio Power Amplifier General Description The LM380 is a power audio amplifier for consumer application. In order to hold system cost to a minimum, gain is internally fixed at 34 db. A unique input
Supertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit
32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit
MIC2940A/2941A. Features. General Description. Applications. Pin Configuration. 1.2A Low-Dropout Voltage Regulator
MIC294A/2941A 1.2A Low-Dropout oltage Regulator General Description The MIC294A and MIC2941A are bulletproof efficient voltage regulators with very low dropout voltage (typically 4 at light loads and 35
Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER
Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER FEATURES HIGH GAIN-BANDWIDTH: 35MHz LOW INPUT NOISE: 1nV/ Hz HIGH SLEW RATE: V/µs FAST SETTLING: 24ns to.1% FET INPUT: I B = 5pA max HIGH OUTPUT
SC603 CHARGE PUMP REGULATOR WITH SELECTABLE 5.0V/4.5V OUTPUT POWER MANAGEMENT
Description The SC603 is a versatile charge pump designed for use in battery operated power supply applications. The wide input range is matched for Li-Ion battery applications. nly two tiny ceramic bucket
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
DATA SHEET. SiGe LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS. Part Number Order Number Package Marking Supplying Form
DESCRIPTION The μpc8tk is a silicon germanium (SiGe) monolithic integrated circuit designed as a low noise amplifier for GPS and mobile communications. The package is -pin lead-less minimold, suitable
NCP707. 200 ma, Very-Low Quiescent Current, I Q 25 A, Low Noise, Low Dropout Regulator
NCP77 2 ma, Very-Low Quiescent Current, I Q 25 A, Low Noise, Low Dropout Regulator The NCP77 is 2 ma LDO that provides the engineer with a very stable, accurate voltage with very low noise suitable for
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
Preliminary Datasheet
Features Macroblock Preliminary Datasheet 1.2A Constant Output Current 93% Efficiency @ input voltage 13V, 350mA, 9~36V Input Voltage Range Hysteretic PFM Improves Efficiency at Light Loads Settable Output
High Speed, Low Cost, Triple Op Amp ADA4861-3
High Speed, Low Cost, Triple Op Amp ADA486-3 FEATURES High speed 73 MHz, 3 db bandwidth 625 V/μs slew rate 3 ns settling time to.5% Wide supply range: 5 V to 2 V Low power: 6 ma/amplifier. db flatness:
PAM2804. Pin Assignments. Description. Applications. Features. Typical Applications Circuit 1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIVER
1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIER Description Pin Assignments The is a step-down constant current LED driver. When the input voltage is down to lower than LED forward voltage, then
TS321 Low Power Single Operational Amplifier
SOT-25 Pin Definition: 1. Input + 2. Ground 3. Input - 4. Output 5. Vcc General Description The TS321 brings performance and economy to low power systems. With high unity gain frequency and a guaranteed
unit:mm 3006B-DIP16 0.71 2.54 0.48
Ordering number:enn505g Monolithic Linear IC LA3361 PLL FM Multiplex Stereo Demodulator Overview The LA3361, PLL FM multiplex stereo demodulator, is designed for low supply voltage-use appliance such as
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
Description SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)
ery low-dropout voltage regulator with inhibit function TO-92 Bag TO-92 Tape and reel Ammopack 1 2 3 SO-8 Description Datasheet - production data The is a very low-dropout voltage regulator available in
LA4725. Specifications. Monolithic Linear IC 2-channel 30W BTL Audio Amplifier. Maximum Ratings at Ta = 25 C. http://onsemi.com
Ordering number : EN1A LA4 Monolithic Linear IC -channel W BTL Audio Amplifier http://onsemi.com Overview The LA4 is a -channel BTL audio power amplifier IC for Car audio. It was designed for the best
ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
SC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729
POWER MANAGEMT Features Input Voltage Range 1.1V to 2A Continuous Output Current Ultra-Low Ron 36mΩ Automatic Output Discharge Circuit Fast Turn-on Option With No Output Discharge Circuit SC728 Extended
L78. Positive voltage regulator ICs. Description. Features
Positive voltage regulator ICs Description Datasheet - production data TO-220 Features DPAK TO-220FP D²PAK Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V Thermal overload
MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev 1; 8/12 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
High Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
TSM2N7002K 60V N-Channel MOSFET
SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
MP2259 1A, 16V, 1.4MHz Step-Down Converter
MP59 1A, 1V, 1.MHz Step-Down Converter TM The Future of Analog IC Technology DESCRIPTION The MP59 is a monolithic integrated stepdown switch mode converter with an internal power MOSFET. It achieves 1A
TDA2004R. 10 + 10 W stereo amplifier for car radio. Features. Description
10 + 10 W stereo amplifier for car radio Features Low distortion Low noise Protection against: Output AC short circuit to ground Overrating chip temperature Load dump voltage surge Fortuitous open ground
NCT3941S/S-A Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A
Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A -I- Revision A4 Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATION...1 4. BLOCK DIAGRAM...2 5. PIN CONFIGURATION AND TYPICAL APPLICATION
AAT3520/2/4 MicroPower Microprocessor Reset Circuit
General Description Features PowerManager The AAT3520 series of PowerManager products is part of AnalogicTech's Total Power Management IC (TPMIC ) product family. These microprocessor reset circuits are
Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8
Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides
CLASS-D VERTICAL DEFLECTION AMPLIFIER FOR TV AND MONITOR APPLICATION OUT CFLY + CFLY - BOOT VREG FEEDCAP FREQ. July 2001 1/8
CLASS-D VERTICAL DEFLECTION AMPLIFIER FOR TV AND MONITOR APPLICATION FEATURES PRELIMINARY DATA HIGH EFFICIENCY POWER AMPLIFIER NO HEATSINK SPLIT SUPPLY INTERNAL FLYBACK GENERATOR OUTPUT CURRENT UP TO.5
1A L.D.O VOLTAGE REGULATOR
FEATURES Output Current up to 1 A Low Dropout Voltage (1.2V at 1A Output current) Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 2.85V, 5.0V Line Regulation typically at 0.1% max. Load
DATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08
INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High
HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout.
HA5104/883 April 2002 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Input Noise Voltage Density at 1kHz. 6nV/ Hz (Max)
TDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER
20W Hi-Fi AUDIO POWER AMPLIFIER DESCRIPTION The TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Typically it provides 22W output power
N-channel enhancement mode TrenchMOS transistor
FEATURES SYMBOL QUICK REFERENCE DATA Trench technology d V DSS = V Low on-state resistance Fast switching I D = A High thermal cycling performance Low thermal resistance R DS(ON) mω (V GS = V) g s R DS(ON)