FC722. Fire control panel. Cerberus PRO. FS720 series, IP6

Transcription

1 FC722 Cerberus PRO Fire control panel FS720 series, IP6 Compact, pre-assembled, microprocessor-controlled fire control panel with integrated operating unit for up to 252 addresses Fire control panel can be used as a standalone version or can be networked Up to 64 stations, such as control panels and terminals, can be linked to form a network Integrated degraded mode function Redundant network node, degraded mode operation according to EN 54 Fast Ethernet interface for a heterogeneous network Integrated user-friendly operating unit Can be extended by adding printer, key switches, LED indicators Slots for RS232 and RS485 serial interfaces Emergency power supply for emergency operating time of up to 72 hours Detection and automatic reading in (auto-configuration) of all C-NET devices, ready for operation immediately Processes signals from Cerberus PRO FD720 detector series Floor repeater displays, floor repeater operating units, and alarm devices on C- NET detector line Flexible configuration of complex applications and controls Configuration data can be uploaded/downloaded via remote access Firmware for all processor-controlled control panel components can be updated A6V _i_en_ Control Products and Systems

2 System overview FC722 Repeater FN2002 Cluster (C-WEB/SAFEDLINK) FC722 Fire control panel FT724 Remote access Engineering Tool, Operating Tool FDM233-Ex Explosionhazard area OOH740-A9-Ex FT200/FT20 Floor repeater terminal / Floor repeater display 24VDC ext. possible FDS22/ FDS229 FDCI222 HI722 FDCI723 4 inputs DBS720 OH720 output FDCIO22 FDM22x Detection line collective Siemens, TM Synova SynoLINE300 or SynoLINE600 FDCL22-Ex DBS72 / DBS729 input 24VDC ext. 2 in-/outputs optionally FDCIO223 C-NET 2 (4) loops max. 252 addresses HI720 FDCI22 OH720 stub line FDM22 Mimic display input FT200-A FDCW24 FDCL22 OP720 OP720 4 outputs FDM273 Transmission of an alarm signal Transmission of a fault signal via FCI2007-A Fire controls via FCI2008-A Conventional horn line via FCI2009-A FDCIO222 4 inputs FDOOT27 Radio detectors FDA22/ FDA24 FC0 or XC0 Fire detection or Extinguishing control unit collective 2 A6V _i_en_

3 Networking of several fire control panels Up to 32 control panels and terminals can be linked to form a cluster (C- WEB/SAFEDLINK network). If the cluster is connected to a danger management system via BACnet, up to 6 control panels and terminals can be networked. Siemens Danger Management System Ethernet DL3750+ FT724/FC72x Matrix printer RS232 FC722 Cluster (C-WEB/SAFEDLINK) In-/ Outputs 6 stations FC722/FC724 Repeater FN A6V _i_en_

4 An optical Ethernet network (C-WEB/LAN) allows up to 4 clusters with up to 6 stations to be operated on one network. A maximum of 64 stations is supported in total. You will find details of system networking in product data sheet A6V A6V _i_en_

5 Function features The FC722 is a compact fire control panel with integrated operating unit for processing signals from FD720 devices. The control panel may be used as a standalone unit or networked. The control panel and the fire detection system are custom-configured using the Cerberus-Engineering-Tool software. All detector lines are monitored for ground faults. Customer texts can be adapted directly on the operating unit of the control panel or with the Cerberus-Engineering-Tool software. Up to 2000 events can be retrieved from the event memory based on various criteria. Automatic summer/winter time changeover Siemens danger management system can be connected Function elements Operating unit The following elements are available on the operating unit: CPU module and electronics Ethernet connection Slots for RS232 and RS485 modules and network modules (SAFEDLINK) Space for 'Kaba' or 'Nordic' key switch Space for event printer (depending on version) Peripheral data bus connection for optional LED modules (for FC722 in Comfort housing) Periphery board The following elements are available on the periphery board: Connection terminals for C-NET lines, remote transmission (alarm, fault), horn output, configurable control inputs and outputs, monitored alarm and fault output, emergency supply, power supply Slot for loop extension (C-NET) 70 W or 50 W power supply, emergency power supply The power supply feeds the hardware and charges the batteries. In the event of a power cut, the batteries provide emergency current. Housing A pivoting mounting plate can be fitted for the following elements above the periphery board on the rear housing panel: x fire brigade periphery module (for Germany) x sounder module (as an alternative to mounting on U-rail TS3) Configuration The FXS722 Cerberus-Engineering-Tool allows the system to be customized. 5 A6V _i_en_

6 Application ranges The FC722 is ideal for smaller applications, e.g., for use in workshops or hotels, or as a device in a network. However, thanks to the flexible networking options, the FC722 can also be used for large-scale sites. Operation Each control unit has an integrated operating unit. The control panel can also be operated via a separate FT724 fire terminal. You will find details and more information in product data sheet A6V A6V _i_en_

7 Overview of FC722 fire control panels Housing (Standard) Housing (Comfort) FC722-ZZ FC722-YZ FC722-ZA FC722-ZE Featuring 24 indicator groups Featuring 48 indicator groups with one red/green + one yellow LED each with one red/green + one yellow LED each 2 loops 2 loops with power supply (70 W) with power supply (70 W) Max. battery capacity 2 Ah Max. battery capacity 2 Ah 2 loops 2 loops with power supply (50 W) with power supply (50 W) Max. battery capacity 26 Ah Max. battery capacity 26 Ah Extensions External printer FH7202-Z3 FH7203-Z3 FTO200-A DL3750+ Housing (Standard) Housing (Comfort) Event printer Matrix printer (external) 430 x 398 x 83 mm 430 x 796 x 83 mm RS232 interface Empty housing for free use For installation in all control panels except FC722-YZ RS232 module must be ordered separately RS232 module must be ordered separately E.g., for extra batteries, Operating add-on, or Operating accessories Event printer FCM724-Y3 Space for batteries 48 display groups 96 indicator groups 2x FA2003-A (7 Ah) or with one red/green + one yellow LED each with one red/green + one yellow LED each 2x FA2004-A (2 Ah) or 2x FA2006-A (26 Ah) E.g., for extra batteries, Operating add-on, or Event printer for retrofitting for retrofitting Space for batteries 2x FA2003-A (7 Ah) or 2x FA2004-A (2 Ah) or 2x FA2005-A (7 Ah) or 2x FA2006-A (26 Ah) 7 A6V _i_en_

8 Layout of FC722 inside housing (Standard) Basic equipment Designation Comment Housing (Standard) FH7202-Z3 Items -5: Basic equipment 2 Periphery board (2-loop) FCI2002-A 3 Power supply (70 W) FP205-A 4 Mains terminals on TS35 DIN rail Space for socket, relay modules 5 Operating unit FCM72xx-xx Operating unit with CPU 6 Space for batteries 2x 2 V/7 2 Ah Extensions 7 Relay module Z3B7 Relay for fire controls 8 Event printer FTO200-A For logging events 9 Key switch (Kaba) FTO2005-C For operating access authorization Key switch (nordic) FTO2006-B 0 Mounting plate FHA2007-A E.g., for fire brigade periphery module Loop extension (C-NET) FCI2003-A For extending the number of loops from 2 to 4, the number of addresses remains the same 2 RS485 module (isolated) FCA2002-A For peripheral devices with RS485 interface 3 RS232 module (isolated) FCA200-A For devices with an RS232 interface 4 Network module (SAFEDLINK) FN200-A For networking several stations 5 Repeater (SAFEDLINK) FN2002-A For extending the C-WEB system bus, max. x repeater (SAFEDLINK) between two stations (mounted directly on a plane surface, on a TS35 U-rail, or in housing FDCH22) 6 Sounder module FCA2005-A For splitting one conventional sounder into four 7 Battery (2 V, 7 Ah, VDS) FA2003-A For the emergency power supply Battery (2 V, 2 Ah, VDS) FA2004-A 8 Fire brigade periphery module FCI200-D For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 9 9" mounting kit FHA206-A For installation in 9" third-party housing 20 License key Sx FCA20xx For special functions 2 Cable kit (communication) FCA204-A For flexible cable joints running to the modules on the operating unit 8 A6V _i_en_

9 Layout of FC722 inside housing (Comfort) Basic equipment Designation Comment Housing (Comfort) FH7203-Z3 Items -5: Basic equipment 2 Periphery board (2-loop) FCI2002-A 3 Power supply (SV 24V-50 W) V24230-Z6-A5 4 Mains terminals on TS35 DIN rail Space for socket, relay modules, etc. 5 Operating unit FCM72xx-xx Operating unit with CPU 6 Space for batteries 2x 2 V/7 26 Ah Extensions Designation Comment 7 Relay module Z3B7 Relay for fire controls 8 Event printer FTO200-A For logging events 9 Key switch (Kaba) FTO2005-C For operating access authorization Key switch (nordic) FTO2006-B 0 Mounting plate FHA2007-A E.g., for fire brigade periphery module Loop extension (FDnet/C-NET) FCI2003-A For extending the number of loops from two to four, the number of addresses remains the same 2 RS485 module (isolated) FCA2002-A For peripheral devices with RS485 interface 3 RS232 module (isolated) FCA200-A For devices with an RS232 interface 4 Network module (SAFEDLINK) FN200-A For networking several stations 5 Repeater (SAFEDLINK) FN2002-A For extending the C-WEB system bus, max. x repeater (SAFEDLINK) between two stations (mounted directly on a plane surface, on a TS35 U-rail, or in housing FDCH22) 6 Sounder module FCA2005-A For splitting one conventional sounder into four 9 A6V _i_en_

10 Extensions Designation Comment 7 Battery (2 V, 2 Ah, VDS) FA2004-A For the emergency power supply Battery (2 V, 26 Ah, VDS) FA2006-A 8 Fire brigade periphery module FCI200-D For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 9 9" mounting kit FHA206-A For installation in 9" third-party housing 20 License key Sx FCA20xx For special functions 2 Cable kit (communication) FCA204-A For flexible connections running to the modules on the operating unit 22 Power supply kit (50 W, B) FP2005-A For extra power supply Technical data FC722 inside housing (Standard) FC722 inside housing (Comfort) Mains voltage AC V/AC V AC 5/230 V +0/-5 % Power supply 70 W 50 W Operating voltage DC V DC V Operating current Max. 2.5 A Max. 5 A Battery capacity 2x 2 V, 7 2 Ah 2x 2 V, 26 Ah Battery monitoring Yes Yes Network monitoring Yes Yes Connectable detector series Cerberus PRO FD720 (C-NET) Cerberus PRO FD720 (C-NET) Number of lines Loops (with loop extension) or Stubs 2 (4) 4 (8) 2 (4) 4 (8) Number of addresses Max. 252 Max. 252 Integrated inputs/outputs Relay output RT alarm RT fault Monitored outputs Alarm Fault Horn Freely programmable inputs/outputs Operating unit Integrated Integrated Slots for RS232, RS485 serial ports 2 2 Slots for network modules 2 2 Slot for loop extension Mounting space for cable kit (communication) 2 Sounder module Max. Max. Ethernet port RJ45 Operating temperature C C Storage temperature C C Air humidity (no condensation permitted) 95 % rel. 95 % rel. Dimensions (W x H x D) Without cover cap With cover cap Color Housing Cover cap x 398 x 60 mm 430 x 398 x 83 mm ~RAL 7035, light gray ~RAL x 796 x 60 mm 430 x 796 x 83 mm ~RAL 7035, light gray ~RAL Protection category (IEC 60529) IP30 IP30 Approvals VdS LPCB FM DNV GL (Marine) G bn/ G bn/ See document A6V A6V _i_en_

11 A6V _i_en_

12 Details for ordering Type Art. no. Designation Weight Control panels FC722-ZZ S54400-C29-A5 Fire control panel (2L) kg FC722-YZ S54400-C29-A4 Fire control panel (2L, LED) kg FC722-ZA S54400-C29-A2 Fire control panel (2L) kg FC722-ZE S54400-C29-A Fire control panel (2L, 2LED) kg Extensions Z3B7 BPZ: Relay module AC 250 V / 0 A ( relay) kg FTO200-A A5Q Event printer kg A5Q Spare printer reels (0 reels) kg FTO2005-C A5Q00003 Key switch (Kaba) 0.03 kg FTO2006-B A5Q Key switch (nordic) kg FHA2007-A A5Q00005 Mounting plate kg FCI2003-A A5Q Loop extension (FDnet/C-NET) kg FCA2002-A A5Q RS485 module (isolated) kg FCA200-A A5Q RS232 module (isolated) kg FN200-A A5Q Network module (SAFEDLINK) kg FN2002-A S24236-B2502-A Repeater (SAFEDLINK) 0.54 kg FCA2005-A A5Q Sounder module 0.40 kg FCA204-A A5Q Cable kit (communication) kg FCI200-D A5Q Fire brigade periphery module kg FH7202-Z3 S54400-B70-A0 Housing (Standard) kg FH7203-Z3 S54400-B7-A0 Housing (Comfort) kg FCM723-Y3 S54400-B49-A Operating add-on (2xLED indicator) kg FCM724-Y3 S54400-B50-A Operating add-on (4xLED indicator) kg FHA206-A A5Q " mounting kit kg FN2006-A S54400-A09-A Fiber network module (SM) kg FN2007-A S54400-A0-A2 Fiber network module (MM) kg Auxiliary power supply FP205-A S54400-B2-A Power supply (70 W).300 kg FP2004-A A5Q Power supply kit (50 W, A) for installation.366 kg into empty housing FP2005-A A5Q Power supply kit (50 W, B) for cascading.00 kg Networks (backbone) FN202-A S54400-B52-A Ethernet switch (modular) kg FCA203 S54400-A53-A Connection module (MoNet) kg kg for cable VN2002-A S54400-A43-A Ethernet module (MM) kg VN2003-A S54400-A44-A Ethernet module (SM) kg FHA2029-A S54400-B79-A Installation kit (switch, comf.).240 kg Batteries FA2003-A A5Q Battery (2 V, 7 Ah, VDS) kg FA2004-A A5Q Battery (2 V, 2 Ah, VDS) kg FA2005-A A5Q Battery (2 V, 7 Ah, VDS) kg FA2006-A A5Q Battery (2 V, 26 Ah, VDS) kg License keys FCA2033-A S54400-P54-A License key (S) 0.00 kg FCA2034-A S54400-P55-A License key (S2) 0.00 kg FCA2035-A S54400-P56-A License key (S3) 0.00 kg External printer DL3750+ A5Q Matrix printer (external) kg Spare part A5Q Color ribbon for matrix printer DL kg Siemens Switzerland Ltd Division International Headquarters Gubelstrasse 22 CH-630 Zug Tel Siemens Switzerland Ltd, 2009 Technical specifications and availability subject to change without notice. Document no. A6V _i_en_-- FS720 manual Edition