Compact Tractor Grapple Rake Attachment

Transcription

1 Worksaver. Designed. Engineered. Remarkable Value. WORKSAVER Compact Tractor Grapple Rake Attachment Designed for compact tractors up to 40 horsepower that are equipped with a front loader. This 60-inch wide grapple allows the acreage owner unsurpassed versatility in clearing brush, piling limbs or orchard maintenance.

2 Worksaver Compact Tractor Grapple Rake Attachment COMPACT GRAPPLE RAKE SPECIFICATIONS Designed for Tractors up to 40 HP Only Overall width (in/mm)... 60/ ( 1524 mm) Overall depth (in/mm)... 23/ ( mm) Overall height (closed) (in/mm) / ( mm) Tine spacing (in/mm) / (381 mm) Grapple opening (in/mm) / (685.8 mm) Number of lower tines... 5 Width of upper grapple (in/mm) / (836.6) Reinforcing tubes between lower tines... Yes Number of cylinders... 1 Cylinder Specifications Bore (in/mm)... 2 / (50.8 mm) Stroke (in/mm)... 8 / (203.2 mm) Rod diameter (in/mm) / (28.57 mm) Pressure (psi/bar) / (172.4) Model FLGR-4062 Mounting Tractor Loader... Mgt Brt available * Weight Skid Steer (lb./kg) / ( kg) Product Computer Number Tractor Loader Model FLGR-4062S For Loaders with Skid Steer Mount... Universal Skid Steer+ Weight Skid Steer (lb./kg) / ( kg) Product Computer Number Skid Steer Be sure tractor is properly counterbalanced. Ideal for loading limbs, orchard prunings, raking and piling brush and other hard to handle materials. Unique upper grapple design provides clamping force to hold material securely. Design to be used with compact tractors of 40 HP or less. Design allows brush and other materials to be picked up while leaving the dirt. Great for picking up / piling cut limbs and treetops when clearing land. Size compatible with the lift capacity of most small loader tractors. Good forward visibility for easy control in close quarters for increased productivity. Simple efficient design with few moving parts for long life. Upper grapple is 34-inches wide for excellent material retention, controlled by single 2 x 8 cylinder. Pivot points have lubrication capabilities. Tractor front loader model allow use of standard pin-on bracket or select interfacing quick attach brackets for John Deere, AGCO, CNH, Kubota and other brands. Model FLGR-4062S is designed for compact tractor front loaders that are quipped with the Universal skid steer quick attach system. It is not designed to be fit to a skid steer loader. *Optional Quick Attach brackets available + Not for use on skid steer loaders READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. Worksaver. Worksaver Inc. has a corporate policy of continuous product improvement and development; therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this publication and the actual equipment. Designed. Engineered. Remarkable Value. Worksaver, Inc. P.O. Box 100, Litchfield, IL Phone: Fax: [email protected] Web: Information Provided By:

3 Worksaver. Designed. Engineered. Remarkable Value. WORKSAVER Split-Top Grapple Rake Attachment Designed for today s modern skid steer and tractor front loaders. Available in 62 or 77 width, the split top design provides dual upper grapples for picking up brush and other debris while leaving the dirt behind.

4 Worksaver. Designed. Engineered. Remarkable Value. Worksaver Grapple Rake for Skid Steer and Front Loader Ideal for loading logs, orchard prunings, raking and piling brush and other hard to handle materials. Unique tine design with replaceable weld-on tine points. Tine points allow operator to go under logs / brush for easy clean pick up. Interfacing quick-attach brackets available for most tractor loader models including John Deere, AGCO, CNH, Bush Hog and others. Greaseable pivot points on upper clamps for long service life. Shield Plate in upper clamps provides protection for hydraulic cylinders. SPLIT-TOP GRAPPLE RAKE SPECIFICATIONS FLGR-262 / SSGR-262 FLGR-277 / SSGR-277 Overall width (in/mm) 62 / / 1956 Overall depth (in/mm) 25 / / 635 Overall height closed (in/mm) 54 / / 1372 Grapple opening (in/mm) 50 / / 1270 Upper grapple widths (in/mm) / / 489 Tine Spacing (in/mm) 15 / / 381 Number of tines / grapples (lower / upper) 5 / 4 6 / 4 Reinforcing tubes between lower tines Yes Yes Number of hydraulic cylinders 2 2 Cylinder bore (in/mm) 2 / / 50.8 Cylinder stroke (in/mm) 10 / / 254 Cylinder rod diameter (in/mm) / / Cylinder pressure rating (psi/bar) 2500 / / Mounting for Tractor Loader (FLGR) Std. Pin Type * Std. Pin Type * Weight FLGR model (lb/kg) 790 / / 440 Mounting for Skid Steer (SSGR) Universal Skid Steer Universal Skid Steer Weight SSGR model (lb/mm) 786 / / 964 Horse power rating (maximum) 95 PTO HP 150 PTO HP Product No. FLGR models (loader) Product No. SSGR models (skid steer) Be sure tractor / skid steer is properly counterbalanced. *Optional Interfacing Quick Attach brackets available for most popular loaders. READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. Worksaver Inc. has a corporate policy of continuous product improvement and development; therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this publication and the actual equipment. Information Provided By: Worksaver, Inc. P.O. Box 100, Litchfield, IL Phone: Fax: [email protected] Web:

5 NEWS WORKSAVER, Inc. 9 Worksaver Trail P.O. Box 100 Litchfield, Illinois Web: (217) Fax (217) [email protected] Date: April 20, 2015 Contact: Sales Dept. Euro / Global to John Deere 400 / 500 Series The new adapter allows owners of loaders that utilize the Euro / Global attaching method to use their John Deere 400 /500 loader series attachments. The all welded design provides ease of attachment mounting and un-mounting. This adapter provides greater versatility to your customers choice of attachments. In addition, the customer can easily switch attachments between a John Deere tractor equipped with a 400 / 500 series loader and a Euro / Global loader equipped with this (835075) adapter. Available: After May 22 nd. Item # Description Weight Interfaces with Euro / Global loaders, allowing the use of John Deere 400 / 500 series attachments 86 lbs.

6 NEWS WORKSAVER, Inc. 9 Worksaver Trail P.O. Box 100 Litchfield, Illinois Web: (217) Fax (217) [email protected] Date: April 20, 2015 Contact: Sales Dept. Skid Steer to John Deere 400 / 500 Series The new adapter allows owners of loaders that utilize the universal Skid Steer attaching method to use their John Deere 400 /500 loader series attachments. The straight forward design provides ease of attachment mounting and un-mounting. All welded design provides strength to handle the tough jobs. This adapter provides greater versatility to your customers choice of attachments. In addition, the customer can easily switch attachments between a John Deere tractor equipped with a 400 / 500 series loader and a skid steer loader equipped with this (835070) adapter. Available: After May 22 nd. Item # Description Weight Interfaces with universal skid steer attach, allowing the use of John Deere 400 / 500 series attachments 99 lbs.

7 Designed. Engineered. Remarkable Value. Adapter Brackets Boost your loader s productivity Engineered, Designed and Manufactured in the USA

8 Worksaver Adapter Brackets Elevate your tractor s productivity by converting its loader (depending on model) to either the Universal Skid Steer quick attach system or the Euro/Global standard. Worksaver Adapter Brackets feature all welded frames for durability, plated latch components for long service life plus the ability to help you get more done. Skid Steer to Euro/Global Euro/Global to Skid Steer Interfaces with agricultural loaders that use the Euro/Global attaching system to allow the use of skid steer type attachments. Weight 110 lbs. Item # Maximum Capacity 4,000 lbs.* Interfaces with skid steer or agricultural loaders that use the universal skid steer attaching method to allow them to use attachments that mount to the Euro/Global tool carrier. Weight 145 lbs. Item # Maximum Capacity 4,000 lbs.* IH 2250 & 2255 Loader to Skid Steer Adapter Interfaces with IH loaders models 2250 & 2255 with pin-on buckets retained by 1-1/8 pins. Allows use of skid steer attachments (shipped less pins). Weight 120 lbs. Item # Maximum Capacity 3,000 lbs.* John Deere 240/245/260/265 Series to Skid Steer Interfaces with John Deere 240/245/260/265 loaders with JD attachment system to allow them to use skid steer type attachments. Weight 165 lbs. Item # Maximum Capacity 3,000 lbs.* READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. * Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity. These are attachment carriers only. Do not use for back dragging. 2

9 Euro/Global to John Deere 600/700 Interfaces with Global/Euro agricultural loaders allowing the use of John Deere 600/700 series attachments. Weight 140 lbs. Item # Maximum Capacity 5,000 lbs.* John Deere 145/146/148/158 Series to Skid Steer Interfaces with John Deere loader models 145/146/148/158 with pin-on buckets retained by 1-1/8 pins. Allows the use of skid steer type attachments (shipped less pins). Weight 125 lbs. Item # Maximum Capacity 3,000 lbs.* John Deere 400/500 Series to Euro/Global John Deere 300/400/500 Series to Skid Steer Interfaces with John Deere 300/400/500 (also 200X, 200CX) series loaders with JD quick attach to allow the use of skid steer type attachments. Weight 132 lbs. Item # Maximum Capacity 4,000 lbs.* Worksaver Adapter Brackets Interfaces with John Deere 400/500 series loaders with the JD quick attach to allow them to use attachments that mount to the Euro/Global tool carrier. Weight 140 lbs. Item # Maximum Capacity 4,000 lbs.* READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. * Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity. These are attachment carriers only. Do not use for back dragging. 3

10 Worksaver John Deere 600/700 Series to Euro/Global Interfaces with John Deere 600/700 series loaders with JD quick attach to allow them to use attachments that mount to the Euro/Global tool carrier. Weight 174 lbs. Item # Maximum Capacity 5,000 lbs.* John Deere 600/700 Series to Skid Steer Interfaces with John Deere 600/700 series loaders with JD quick attach to allow the use of skid steer type attachments. Weight 140 lbs. Item # Maximum Capacity 5,000 lbs.* John Deere 48 & 58 Loader Skid Steer Adapter Interfaces with John Deere loader models 48 and 58 with buckets retained by 1-1/4 pins with single center tilt cylinder. Allows use of skid steer type attachments (shipped less pins). Weight 148 lbs. Item # Maximum Capacity 3,000 lbs.* Kubota LA852 to Skid Steer Interfaces with Kubota loader model LA852 with pin-on bucket retained by 1 pins. Allowing the use of skid steer type attachments (shipped less pins). Weight 105 lbs. Item # Maximum Capacity 3,500 lbs.* READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. * Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity. These are attachment carriers only. Do not use for back dragging. 4

11 Kubota LA350, LA401, LA452 to Skid Steer Interfaces with Kubota loader models LA350, LA401, LA402, LA450, LA452, LA480, LA481, LA482, LA680, LA681, LA682 LB402, LB552, LB702, with pin-on buckets retained by 1 pins. Allowing the use of skid steer type attachments (shipped less pins). Weight 110 lbs. Item # Maximum Capacity 3,500 lbs.* Massey Ferguson 232, 236, 832, 838, 1032 to Skid Steer Interfaces with Massey Ferguson loader models 232, 236, 832, 838, 1032, 1040, 1050 with pin-on buckets retained by 1 pins. Allows the use of skid steer type attachments (shipped less pins). Weight 148 lbs. Item # Maximum Capacity 3,500 lbs.* Kubota LA1251, LA1301, LA1601 to Skid Steer Interfaces with Kubota LA1251, LA1301, LA1601 series loaders with semi quick attach to allow the use of skid steer type attachments (shipped less pins). Weight 150 lbs. Item # Maximum Capacity 3,500 lbs.* Massey Ferguson 238, 246, 848, 938, 948, 1036, 1048 to Skid Steer Worksaver Adapter Brackets If mounting pins are bushed to 1-1/4 (requires pin kit & bushing kit ) this unit can be used on Massey Ferguson loader models 238, 246, 848, 938, 948, 1036, 1038, 1048 to allow the use of skid steer type attachments (shipped less pins). Weight 148 lbs. Item # Maximum Capacity 3,500 lbs.* READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. * Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity. These are attachment carriers only. Do not use for back dragging. 5

12 Worksaver New Holland 2109, 7109, 7209, 7210, 7309, 7310, 7410 to Skid Steer Interfaces with New Holland loader models 2109, 7109, 7209, 7210, 7309, 7310, 7410 with pin-on buckets retained by 1-1/4 pins. Vertical ctc distance between pins is Allows use of skid steer attachments (shipped less pins). Weight 120 lbs. Item # Maximum Capacity 3,500 lbs.* New Holland 7308/7108 & Case IH L130 to Skid Steer Interfaces with New Holland loader 7308, 7108 & Case IH L130 with pin-on buckets retained by 1 pins. Allows use of skid steer attachments (shipped less pins). Weight 117 lbs. Item # Maximum Capacity 3,500 lbs. * New Holland 14LA, 15LA, 16LA, 17LA,18LA, Case IH L160, LX114, LX116, LX118 Interfaces with New Holland loader models 14LA, 15LA, 16LA, 17LA, 18LA and Case IH models L160, LX114, LX116, LX118 with buckets retained by 1-1/4 pins. Vertical ctc distance between pins is Allows use of skid steer attachments (shipped less pins). Weight 120 lbs. Item # Maximum Capacity 3,500 lbs.* READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. * Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity. These are attachment carriers only. Do not use for back dragging. 6

13 Weld-on Attachment Brackets Easily convert your bucket or other attachments to be used with one of our adapters. These weld-on items are engineered to fit, allowing you to get more done. WSP Weld-on Plate Standard duty weld-on plate of ¼ material simply welds to any existing attachment to convert it to the universal skid steer mount interface. Weight 46 lbs. Item # Maximum Capacity 3,500 lbs.* WSP-HD Weld-on Plate Euro/Global Two (2) Piece Weld-on Kit Weld-on kit provides left / right hand brackets to convert attachments to the Euro/Global mount interface, allowing their use with Euro/Global tool carrier. Weight 36 lbs. Item # Maximum Capacity 3,500 lbs.* Heavy duty weld-on plate of 3/8 material simply welds to any existing attachment, added cutout provides increased welding surface. Converts attachments to universal skid steer mount interface. Weight 96 lbs. Item # Maximum Capacity 5,000 lbs.* Euro/Global Heavy-Duty Weld-on Plate Worksaver Adapter Brackets Heavy-duty weld-on plate of 5/16 material simply welds to any existing attachment to convert to the Euro/Global interface, allowing their use with Euro/Global tool carrier. Weight 95 lbs. Item # Maximum Capacity 5,000 lbs.* READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION. * Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity. These are attachment carriers only. Do not use for back dragging. 7

14 NEWS WORKSAVER, Inc. 9 Worksaver Trail P.O. Box 100 Litchfield, Illinois Web: (217) Fax (217) [email protected] Date: July 20, 2015 Contact: Sales Dept. Weld-on Plate for John Deere 300 /400 Series Worksaver, Inc. announces the addition of a John Deere 300 / 400 series Weld-on Plate to complement our lineup of weld-on plates and kits. Formed from 5/16 steel for durability this plate offers the customer versatility when converting attachments. Designed to be welded to existing attachments, this allows them to be used with John Deere 300 / 400 series loaders that use the JD attaching system. The JD 300/400 Plate features steel cast upper hooks, welded locking pins spaced to OEM specifications to assure proper fit when welded to buckets or other attachments. Production starts: July 2015 Note: JD 300/400 Plate will ship UPS Item # Description Weight JD 300/400 series weld-on plate unit measurements are x lbs.

15 NEWS WORKSAVER, Inc. 9 Worksaver Trail P.O. Box 100 Litchfield, Illinois Web: (217) Fax (217) [email protected] Date: July 20, 2015 Contact: Sales Dept. Weld-on Plate for John Deere 500 Series Worksaver, Inc. announces the addition of a Weld-on Plate for John Deere 500 series loaders to complement our lineup of weld-on plates and kits. Formed from 5/16 steel for durability this plate offers owners of 500 series loaders a reliable and easier method for converting attachments. Designed to be welded to existing attachments, the plate will interface with John Deere 500 series loaders that use the JD 500 series attaching system. The JD 500 Plate features steel cast upper hooks, welded locking pins spaced to OEM specifications to assure proper fit when welded to buckets or other attachments. Production starts: July 2015 Note: JD 500 Plate will ship UPS Item # Description Weight JD 500 series weld-on plate unit measurements are x lbs.

16 Universal Skid Steer Adapter for Standard Pin-on Loaders Universal Skid Steer Adapter for Compact Pin-on Loaders When paired with standard pin-on brackets (830345) unit is designed to interface with pin-on type loaders that use 1 pins. Allows the use of skid steer type attachments. Unit width is 54 and height is Weight 144 lbs. Item # Maximum Capacity 3,500 lbs.* When paired with a set of pin-on brackets (811235, , , , ), it is designed to interface with compact pin-on type loaders to allow the use of skid steer type attachments. Unit width 54 and in height. Weight 138 lbs. Item # Maximum Capacity 3,000 lbs.* Universal Euro/Global Adapter for Standard Pin-on Loaders When paired with standard pin-on brackets (830345) this unit will interface with pin-on type loaders that use 1 pins. This will allow the use of attachments that mount to the Euro/Global tool carrier. Weight 146 lbs. Item # Maximum Capacity 3,500 lbs.* Caution A heavy load can cause your tractor to tip over. When moving heavy loads, keep the load as close to the ground as possible, go slowly around turns, and be sure the front or rear of tractor is properly counterbalanced with weights. Caution Operators must read & understand operator s manual, particularly the safety warnings and instructions. The operator is responsible for safety of themselves and others when operating equipment. WORKSAVER, INC. has a corporate policy of continuous product improvement and development; therefore, specifications are subject to change without any advance notice. WORKSAVER, INC. is not responsible for differences between specifications or illustrations contained in this publication and the actual equipment. Distributed by: Worksaver, Inc. P.O. Box 100, Litchfield, IL Phone: Fax: [email protected] Designed. Engineered. Remarkable Value. Form No Worksaver, Inc. Printed in U.S.A.

17 NEWS WORKSAVER, Inc. 9 Worksaver Trail P.O. Box 100 Litchfield, Illinois Web: (217) Fax (217) [email protected] Date: November 1, 2013 Contact: Sales Dept. JDPF-H48048 / JDPF-H48060 Worksaver, Inc. announces Pallet Forks designed for the John Deere H480 loader with the Global Series II tool carrier. These forks are the logical choice for the producer who is looking to get more done. Rated at 7,500 lbs. they are offered with Class III tines that are either 48 in length or 60 in length. Production starts: February 10, 2014 Item # Description Weight List Price JDPF-H48048, pallet forks for Global Series II tool carrier. Rated at 7,500 lbs. 785 lbs. $1, Class III Forks 1.75 x 4.25 x JDPF-H48060, pallet forks for Global Series II tool carrier. Rated at 7,500 lbs. Class III Forks 1.75 x 4.25 x lbs. $2,410.00

18 Adapters to use Skid Steer Attachments All welded design, features plated handles, springs and locking pins. Allows selected loader models to be converted to use skid steer type attachments. OEM Manufacturer Item # Description LBS. List Interfaces w/loaders that use the Euro/Global Euro to Skid Steer attaching system to allow the use of skid steer type attachments. Max Cap. 4,000 lbs Interfaces w/jd 300/400/500 series loaders allowing use of skid steer type attachments Max Cap. 4,000 lbs. JD 300/400/500 to Skid Steer JD 200CX to Skid Steer Interfaces with JD 200X, 200CX, H120, H130, H160, JD 600/700 to Skid Steer JD 146/148/158 to Skid Steer John Deere 48/58 to Skid Steer JD 240/245/260/265 to Skid Steer Kubota LA852 to Skid Steer Kubota LA1251, LA1301, LA1601 to Skid Steer D120, D160 to skid steer Max. Cap. 1,200 lbs. Interfaces w/ JD 600/700 series loaders allowing use of skid steer type attachments. Max Cap. 5,500 lbs. Interfaces w/ JD 146/148/158 loaders with pin-on buckets retained by 1-1/8 pins, allowing the use of skid steer type attachments(shipped less pins) Max Cap. 3,000 lbs. Interfaces w/jd 48/58 pin type (1-1/4 pins) loaders with single center cylinder, allowing the use of skid steer type attachments (shipped less pins) Max. Cap. 3,000 lbs Interfaces with JD 240/245/260/265 loaders, allows the use of skid steer type attachments. (shipped less pins) Max Cap 3,500 lbs Interfaces with Kubota LA852 with pin-on bucket retained by 1-3/16 pins. Allows the use of skid steer type attachments (shipped less pins) Max Cap 3,500 lbs Kubota to Skid Steer Kubota LA504, LA534 to Skid Steer Kubota LA524, LA525 to Skid Steer McCormick 125C, Branson SL100, Kioti KL2510, LS-LL2101 to skid steer MF 232/236/832/838/1032 to Skid Steer Interfaces with Kubota LA1251, LA1301, LA1601 Loaders equipped with semi-quick attach. Allows the use of skid steer type attachments. (shipped less pins) Max Cap. 3,500 lbs. Interfaces w/ Kubota LA350, LA401,LA402, LA450, LA452, LA480, LA481, LA482, LA680, LA681, LB402, LB552, LB702, allowing the use of skid steer type attachments (shipped less pins) Max cap. 3,500 lbs Interfaces with Kubota LA504, LA534 allowing use of skid steer attachments. (shipped less pins) Interfaces with Kubota LA524, LA525 allowing use of skid steer attachments. (shipped less pins) Interfaces with McCormick 125C, Branson SL100, Kioti KL2510, LS LL2101 allowing use of skid steer attachments includes 25mm x127mm Greaseable pins Interfaces w/massey Ferguson 232, 236, 832, 838, 1032 Loaders retained by 1 pins. Allows the use of skid steer type attachments (shipped less pins) Max Cap. 3,500 lbs. Page 1 of

19 Adapters to use Skid Steer Attachments All welded design, features plated handles, springs and locking pins. Allows selected loader models to be converted to use skid steer type attachments. OEM Manufacturer Item # Description LBS. List If pins are bushed to 1-1/4 ( Requires Pin Kit MF to Skid Steer & Bushing Kit ) this unit can be used on MF238/938/948/1036/1048 to allow the use of skid steer type attachments (shipped less pins) Max Cap. 3,500 lbs. Interfaces with Massey Ferguson model DL95 to MF DL95 to Skid Steer allow the use of Skid Steer Attachments (shipped less pins) Max. Cap. 1,200 lbs Mahindra Max 24L to Skid Steer Mahindra Max 26L to Skid Steer New Holland 7308, 7108 & Case IH L130 to Skid Steer New Holland 2109, 7109, 7209, 7210, 7309, 7310, 7410 to Skid Steer New Holland 14LA, 15LA, 16LA, 17LA, 18LA and Case IH LX114, LX116, LX118 to Skid Steer IH 2250 / 2255 to Skid Steer Universal SS Adapter Standard Loaders Universal SS Adapter Compact loaders Skid Steer to Euro/Global JD 400/500 to Euro/Global JD 600/700 to Euro/Global Interfaces w/ Mahindra Max 24L to allow the use of Skid Steer Attachments (shipped less pins) Max Cap lbs. Interfaces w/ Mahindra Max 26L to allow the use of Skid Steer Attachments (shipped less pins) Max Cap lbs. Interfaces w/new Holland Loaders 7308, 7108 & Case IH L130 loaders attaching system to allow the use of skid steer type attachments.(shipped less pins) Max Cap. 3,500 lbs. Interfaces w/new Holland Loaders 2109, 7109, 7209, 7210, 7309, 7310, 7410 with pin-on buckets retained by 1-1/4 pins. Vertical ctc distance between pins is Allows use of skid steer attachments (shipped less pins) Interfaces w/new Holland loader models 14LA, 15LA, 16LA, 17LA, 18LA and Case IH LX114, LX116, LX118 with buckets retained by 1-1/4 pins. Vertical ctc distance between pins is Allows use of skid steer attachments.{may require use of pin kit if standard loader pins are not long enough} (shipped less pins) Interfaces w/ IH Loader 2250 / 2255 attaching system to allow the use of skid steer type attachments (shipped less pins) Max Cap. 3,500 lbs. Convert standard tractor loaders to accept skid steer attachments, pair with pin-on brackets or any brackets listed on pages Max. Cap. 3,000 lbs. Convert compact pin-on loader to accept skid steer type attachments. Requires pin-on brackets see page 19 Maximum Capacity 3,000 lbs. Adapters to Use Euro / Global Attachments Interfaces with Universal skid steer attachment, allowing the use of Euro/Global attachments Interfaces with JD 400/500 series loaders, allowing the use of Euro/Global attachments Interfaces with JD 600/700 series loaders, allowing the use of Euro/Global attachments Page 2 of , ,195.00

20 Adapters Others All welded design, OEM Manufacturer Item # Description LBS. List Universal Euro/Global Convert standard tractor loaders to accept Adapter Standard Euro/Global attachments. Pair with pin-on 146 1, Loaders brackets or any brackets listed on pages Euro / Global to JD 400/ Euro / Global to JD 600/ Skid Steer to John Deere 400/500 series loaders pt to Skid Steer Skid Steer to Cat I Quick Hitch Skid Steer to Cat II Quick Hitch Mini-Universal to Skid Steer Adapter Interfaces with Euro / Global loaders allowing the use of John Deere 400 / 500 series attachments Max Cap 4,000 lbs. Interfaces with Euro/Global loaders allowing the use of JD 600/700 attachments. Max Cap. 5,000 lbs. Interfaces with Universal skid steer attach, allowing the use of JD 400/500 attachments. Max Cap. 4,000 lbs. Interfaces with Cat I or Cat II 3-pt hitch (quick hitch compatible) allows the use of skid steer type attachments, plated handles, springs and locking pins. Works best with Hydraulic top link. (see page 1 for Hydraulic Top Link) Universal skid steer to Cat I quick hitch allows the use of Cat I non-pto powered implements on a skid steer Universal skid steer to Cat II quick hitch allows the use of Cat II non-pto powered implements on a skid steer Designed for mini skid steer / compact tool carrier to allow them to use standard universal skid steer attachments Adapters for Sub-compact loader w/ single center cylinder allows use of Skid Steer Attachments Max. Capacity 1,200 lbs. Kioti SL2410 to Skid Steer Kubota LA240, LA243 to Skid Steer Mahindra Emax22L 25L & TYM TX-25 to Skid Steer Interfaces with Kioti model SL2410 with center single lift cylinder to allow the use of skid steer type attachments (shipped less pins) Interfaces with Kubota model LA240, LA243 with center single lift cylinder to allow the use of skid steer type attachments (shipped less pins) Interfaces with Mahindra model Emax 22L, 25L & TYM TX-25 with center single lift cylinder to allow the use of skid steer type attachments (shipped less pins) Page 3 of 26

21 Weld-on Plates Weld-on Plates and Kits Easily convert your bucket or other attachments to be used with one of our adapters. These weld-on items are engineered to fit, allowing you to get more done. Product Model Item No. Description Lbs. List WSP Std. Duty weld-on plate of ¼ material simply welds on to existing attachment to convert it to universal skid steer mount interface WSP-HD Euro Plate Euro Kit JD 300/400 Plate JD 400/500 Plate Mini Skid Steer Plate NTW Heavy Duty weld-on plate of 3/8 material, welds to existing attachment, added cutout provides increased welding surface. Converts attachment to universal skid steer mount interface Euro/Global Heavy-duty weld-on plate of 5/16 material. Simply welds to any existing attachment to convert to the Euro/Global interface, allowing their use with the Euro/Global tool carrier Weld-on kit provides left/right hand brackets to convert attachments to the Euro/Global mount interface, allowing their use with Euro/Global tool carrier Weld-on plate for JD 300/400 series loaders. Simply welds to any existing attachment to convert to JD 300/400 interface. Plate is x with steel cast hooks & welded locking pins Weld-on plate for JD 400/500 series loaders. Simply welds to any existing attachment to convert to JD 400/500 interface. Plate is x with steel cast hooks & welded locking pins Weld-on plate to weld to existing attachments to convert it to Mini Universal mount interface to allow use on Toro-Dingo, Boxer, Ramrod and others Page 4 of 26

22 Material Handling Attachments Designed for Use on Tractor Front Loaders Units are priced less any brackets. Pin-on or quick attach brackets ordered separately. (pgs ) Product Model Item # Description Lbs. List FLGR Front Loader Split Top Grapple Rake. 62 wide. Two upper grapples handle a variety of materials. Two 2 x10 hydraulic cylinders. Optional interfacing brackets available , FLGR Parking Stand Kit Front Loader Split Top Grapple Rake. 77 wide. Two upper grapples handle a variety of materials. Two 2 x10 hydraulic cylinders. Optional interfacing brackets available. Grapple Parking Stand Kit. Fits all grapples except Low Profile models. Allows upright storage and easy hook up on hard surfaces , Global / Euro Style Integrated Frame Spilt Top Grapples Features all welded frame that incorporates the Euro-Style implement hook standard integrated into them allowing them to easily hook-up to the Euro / Global-Style quick-attach tool carrier. Front Loader Split Top Integrated Grapple FLGR-262G Rake 62 wide. Two upper grapples handle a 827 3, variety of materials. Two 2 x 10 hydraulic cylinders. Integrated Euro / Global implement hooks standard FLGR-277G Front Loader Split Top Integrated Grapple Rake 77 wide. Two upper grapples handle a variety of materials. Two 2 x 10 hydraulic cylinders. Integrated Euro / Global implement hooks standard 970 3, Page 5 of 26

23 Material Handling Attachments Mini Grapple for Sub-Compact Tractors Designed for Sub-Compact Tractors equipped with a loader. Universal skid steer mount or John Deere 200/300 series mount 48 wide Grapple for Sub-Compact tractors with loaders that utilize the universal skid CTMG-48S steer quick attach mounting. Single , NEW wide grapple provides clamping force. Shipped Less Hoses & Fittings NEW Mini Grapple for John Deere Sub- Compacts equipped with loaders that use CTMG-48JD the JD 200/300/400 bucket quick attach. 1, Over width 48, upper grapple 31 Shipped Less Hoses and Fittings ETG-Series Designed to fit John Deere 400/500 Series Loaders All welded construction that incorporates the John Deere 400/500 series attachment brackets Product Model Item # Description Lbs. List ETG-5-JD Low-Profile Tine Grapple with single upper grapple. For JD 400/500 series 460 1, quick attach. Unit is 61 wide Includes hoses (less couplers) ETG-6-JD Low-Profile Tine Grapple with single upper grapple. For JD 400/500 series 489 1, quick attach. Unit is 72 wide Includes hoses (less couplers) NEW ETG-26-JD Low-Profile Grapple with Dual Upper Grapples 72 wide. For JD 400/500 series loaders. Includes hoses (less couplers) 560 1, ETG-Series Designed for Use on Euro/Global Loaders Features all welded frame that incorporates the Euro-Style implement hook standard integrated into it allowing unit to easily hook-up to the Euro / Global-Style quick-attach tool carrier. ETG-26G NEW Low-Profile Tine Grapple with Dual Upper Grapples. Euro/Global Mount, 72 wide with 8-lower tines spaced 10 Includes hoses (less couplers) 1, Page 6 of 26

24 Material Handling Attachments Grapple Rakes for Compact Tractors up to 40 HP Model FLGR-4062 is priced less brackets. Brackets must be ordered separately (below). Model FLGR-4062S design incorporates universal quick attach system. Product Model Item # Description Lbs. List Designed for Compact Tractor Front Loaders. Grapple Rake is 60-inch wide for picking up FLGR hard to handle materials. Single cylinder 277 1, controls upper grapple. Optional interfacing brackets for most compact loaders available. FLGR- 4062S For Compact Tractor Front Loaders w/ universal quick attach system. 60-inch wide for picking up hard to handle materials. Single cylinder controls upper grapple. Not for skid steers (ETG Series Grapples page 11) 355 1, Interfacing Brackets for Compact Tractor Grapple Rake, FLPF-2000 Pallet Fork, and 5-ft, / 6-ft SBFL Snow Blades. Model Item # Description Lbs. List Designed for pin on Loaders with 1 Pins (pair) Designed for pin-on loaders with ¾ pins (pair) Designed for pin-on loaders with 1-1/8 pins (pair) Designed for pin-on loaders with 1-3/16 pins (pair) Designed for pin-on loaders with 1-1/4 pins (pair) Branson Branson Interfacing Brackets for Models BL10A, BL20A Case / IH Case/IH for LX-132 with 1-1/4 pins with large offset (pair) John Deere Interfacing Brackets for models John Deere 300, 300CX, 410, 420, 430, 440, 460, 400X when used with FLGR-4062 / ULF Kubota Kubota Interfacing Brackets for Model LA when using FLGR-4062 / ULF-2046 Kubota Kubota Interfacing Brackets for Model LA when using FLGR-4062 / ULF-2046 Kubota Kubota Interfacing Brackets for Model LA when using FLGR-4062 / ULF-2046 Massey MF Brackets for Models 1462, 1464, 1515, Ferguson 1520, 1525, for FLGR-4062 / ULF-2046 MF MF Brackets for DL-100, 1525 loader TYM TYM Interfacing Brackets for Model TL Bolt-on Universal Skid Steer Style bracket for FLGR NOTE: These interfacing brackets fit only compact tractor attachments. Interfacing brackets for all other front loader attachments are listed on pages Page 7 of 26

25 Material Handling Attachments Manure / Silage / Debris Forks Designed for Use on Tractor Loaders Models are offered to interface with John Deere series Loaders, as well as models that accept our pin-on or quick attach brackets found on pages Product Model Item # Description Lbs. List Manure / Silage / Debris for John Deere Loaders M/S-50JD M/S-60JD M/S-66JD M/S-72JD M/SG-60JD M/SG-72JD Manure / Silage Fork, 50-inches in width. Unit features 7 -forged cranked tines. Interfaces with JD 200 / 300 loaders (Not compatible with 240, 245,260,265). Manure / Silage Fork, 60 inches in width. Unit features 8-forged cranked tine. Interfaces with JD 400 / 500 series loaders Manure / Silage Forks 66-inches in width. 9-forged cranked tine. Interfaces with JD 400 / 500 series loaders Manure / Silage Fork, 72 inches in width. Unit features 10-forged cranked tine. Interfaces with JD 400 / 500 series loaders Manure / Silage Fork w/ upper grapple, 60-inch. 8-forged ranked tines, 34-inch upper grapple,. Interfaces with JD 400 / 500 series loaders Less hoses & couplers Manure / Silage Fork w/ upper grapple, 72-inch 10-forged cranked tines, 34-inch upper grapple, Interfaces with JD 400 / 500 series loaders Less hoses & couplers , , , , , Universal Manure / Silage / Debris Forks. Designed to be used with our optional bolt-on brackets shown on pages Brackets are required to complete unit. M/S-60U M/S-72U Universal Manure / Silage Fork. 60-inch width, 8-forged cranked tines. Optional brackets for most quick attach system available Universal Manure / Silage Fork. 72-inch width, 10-forged cranked tines. Optional brackets for most quick attach s ystem available , M/SG-60U M/SG-72U Universal Manure / Silage Fork w/ upper grapple, 60-inch, 8-forged cranked tines, 34-inch upper grapple. Opt. bracket for most quick attach system available. Less hoses & couplers Universal Manure / Silage Fork w/ upper grapple, 72-inch, 10-forged cranked tines, 34-inch upper grapple. Opt. bracket for most quick attach system available. Less hoses & couplers Page 8 of , ,245.00

26 Material Handling Attachments Pallet Forks Designed for Use on Front Loaders PF at 4,000 lbs. Solid 48 long (1-3/8 x 4 ) forks. Designed to mount to loaders with 438 1, center to center between arms up to 50. Optional interfacing brackets Available (pgs ). NOT FOR USE ON BI-DIRECTIONAL Integrated Frame Pallet Forks for John Deere 400/500 Series Loaders Integrated frame pallet forks for John Deere 359 JDPF /500 series loaders, rated at 4,000 lbs Solid forks are 1-3/8 x 4 x 42 long. Integrated frame pallet forks for John Deere 345 JDPF /500 series loaders, rated at 4,000 lbs Solid forks are 1-3/8 x 4 x 48 long. Integrated Frame Pallet Forks for John Deere 600 / 700 Series Loaders Integrated frame pallet forks for John Deere JDPF /700 series loaders, rated at 5,500 lbs , Solid forks are 1-1/2 x 4 x 48 long. Integrated Frame Pallet Forks for John Deere H480 Loaders Integrated frame pallet forks for John Deere JDPF-H H480 loaders with Global-Series II 785 1, attaching method. Forks are 1.75 x 4.75 x 48 long rated at 7,500 lbs. JDPF-H Integrated frame pallet forks for John Deere H480 loaders with Global-Series II attaching method. Forks are 1.75 x 4.75 x 60 long rated at 7,500 lbs , Page 9 of 26

27 Material Handling Attachments Integrated Frame Pallet Forks With Euro / Global Attaching Method Integrated frame pallet forks for loaders GLPF with the Euro / Global attaching method Forks are 42 long (1-3/8 x 4 ). Rated at 4,000 lbs. GLPF Integrated frame pallet forks for loaders with the Euro / Global attaching method Forks are 48 long (1-3/8 x 4 ). Rated at 4,000 lbs. GLPF Integrated frame pallet forks for loaders with the Euro / Global attaching method , Forks are 48 long (1-1/2 x 4 ). Rated at 5,500 lbs. Clamp-On Bucket Pallet Forks Pair Clamp-On Bucket Pallet Forks 1,000 lbs. BF capacity. 35 useable tine length. Fits most loader buckets. Socket for 2x4 backstop. BF Clamp-On Bucket Pallet Forks 2,000 lbs. capacity. 42 useable tine length. Fits most loader buckets. Socket for 2x4 backstop. BF Clamp-On Bucket Pallet Forks 4,000 lbs. capacity. 42 useable tine length. Fits most loader buckets. Socket for 2x4 backstop See Page 21 for Pallet Forks rated at 2,400 lbs. for Compact Tractors Page 10 of 26

28 Material Handling Attachments Pallet Forks for Compact Tractors Units feature Class I forks rated at 2,400 lbs. for the pair. Rail style pallet forks Rated at 2,400 lbs. Features solid forks, 1.18 x 3 x 42, with FLPF-2000 spring-loaded toggle latch for positioning Optional interfacing brackets for most quick attach systems on page 14. For loaders with ctr.-ctr. distance of 42 or less of the loader arms. Not for 3-pt. Cannot be used with brackets. Integrated frame pallet forks for John Deere JDPF /300 series loaders (not compatible with 240,245,260,265). Rail style rated at 2,400 lbs. Solid forks, 1.18 x 3 x 42 with spring-loaded toggle latch for positioning. Integrated frame pallet forks for compact tractor loaders that utilize the universal SSPF skid steer attachment system. Rail style rated at 2,400 lbs. Solid forks 1.18 x3 x42 with spring-loaded toggle latch for positioning Page 11 of 26

29 AGCO / Allis Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Allied-Farm King Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price SL SL SL FL FL200A HOOK STYLE FL200A SKID STEER STYLE FL FL FL45 Euro FL FL FLS200 HOOK STYLE SL46 Skid Steer Style SL48 Skid Steer Style ST35A Skid Steer Style ST40A E EURO Skid Steer Style AGCO / WHITE 2595E EURO E EURO E EURO S SL Skid Steer Style HSL QA Skid Steer Style QA QA SL SL SL SL Page 12 of 26

30 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets ALO ALO (cont.) Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 300 SERIES (new style) Q61 EURO SERIES (new style) Q65 EURO SERIES (new style) Q66 EURO SERIES (new style) Q68 EURO SERIES (new style) Q75 EURO SERIES (new style) Q76 EURO Q20 EURO Q78 EURO Q20 SKID STEER STYLE Q85 EURO Q21 EURO Q88 EURO Q21 SKID STEER STYLE X21 EURO Q25 EURO X21 Skid Steer Style Q25 SKID STEER STYLE X26 Euro Q26 EURO X26 Skid Steer Style Q26 SKID STEER STYLE X31 EURO Q30 EURO X31 Skid Steer Style Q30 SKID STEER STYLE X36 Euro Q31 EURO X36 Skid Steer Style Q31 SKID STEER STYLE X41 Euro Q33 EURO X41 Skid Steer Style Q33 SKID STEER STYLE X46 Euro Q35 EURO X46 Skid Steer Style Q35 SKID STEER STYLE Q36 EURO Bobcat Q36 SKID STEER STYLE TL SKID STEER Q38 EURO TL SKID STTER Q38 SKID STEER STYLE TL SKID STEER Q40 EURO TL SKID STEER Q40 SKID STEER STYLE V417 SKID STEER Q41 EURO V518 SKID STEER Q41 SKID STEER STYLE V623 SKID STEER Q45 EURO V638 SKID STEER Q45 SKID STEER STYLE V723 SKID STEER Q46 EURO Q46 SKID STEER STYLE Q48 EURO Q49 EURO Q50 EURO Q51 EURO Q55 EURO Q56 EURO Q58 EURO Q60 EURO Page 13 of 26

31 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Branson Bush Hog Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price BL BL10A BL205 SKID STEER STYLE BL20A BL255 SKID STEER STYLE BL25R SKID STEER STYLE BL30 SKID STEER STYLE BL40 SKID STEER STYLE BL50 SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE STSL SKD STEEL SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE QT SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE M300 SKID STEER STYLE M M M M Page 14 of 26

32 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Case IH Case IH Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price LX114 SKID STEER LX740 EURO LX118 SKID STEER LX750 EURO LX132 SKID STEER LX760 EURO LX152 SKID STEER LX770 EURO LX156 EURO LX780 EURO LX162 EURO l LX172 EURO LX232 SKID STEER Caterpillar LX252 SKID STEER H SKID STEER STYLE L H SKID STEER STYLE LX340 SKID STEER B SKID STEER STYLE L350 SKID STEER TH255 SKID STEER STYLE LX350 SKID STEER L360 SKID STEER Challenger LX360 SKID STEER ML40B ML40B SKID STEER ML30B SKID STEER STY;E L530 SKID STEER STYLE ML30A L540 SKID STEER STYLE ML40A LX700 SERIES EURO ML40B L700 SERIES EURO ML77 EURO B EURO Cub Cadet LX116 SKID STEER STYLE SKID STEER STYLE L340 SKID STEER STYLE SKID STEER STYTLE CL300 SKID STEER STYLE CL400 SKID STEER STYLE EURO EURO EURO EURO EURO EURO L400 EURO L500 EURO L600 EURO L700 EURO L750 EURO L850 EURO LX720 EURO LX730 EURO Page 15 of 26

33 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Deutz -Fahr Force Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 1950 SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE L735M EURO SKID STEER STYLE LFZ-760M SKID STEER STYLE SKID STEER STYLE Duall SEE WOODS LOADERS 3045 SKID STEER STYLE SKID STEER STYLE Farmhand 3545 SKID STEER STYLE XL740 Semi-QA SKID STEER STYLE XL940 Semi QA SKID STEER STYLE XL SKID STEER STYLE XL940 Semi QA XL Ford SEE NEW HOLLAND SL XL Frey SL HR1100 EURO XL HR1100 SKID STEER STYLE SL HR1120 EURO M SKID STEER STYLE HR1120 SKID STEER STYLE M SKID STEER STYLE HR1130 EURO M SKID STEER STYLE HR1130 SKID STEER STYLE SKID STEER STYLE ML180 SKID STEER STYLE SKID STEER STYLE ML180EURO SKID STEER STYLE ML200 EURO SKID STEER STYLE ML200 SKID STEER STYLE SKID STEER STYLE ML280 EURO SKID STEER STYLE ML280 SKID STEER STYLE SKID STEER STYLE ML ML Fendt ML560 EURO EURO ML6130 EURO EURO ML6130 SKID STEER STYLE ML665 EURO HSL ML665 SKID STEER STYLE Gehl Wheel Loader Models 140 SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE Page 16 of 26

34 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Great Bend Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price M SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE Page 17 of 26

35 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets John Deere John Deere (cont.) Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price (3/4 pins, Pin Type) (Pin Type Mount) (Pin Type Mount) (600 Style Carrier) (Global Carrier) (SKID STEER Carrier) (3/4 pins, Pin Type) (Pin Type Mount) (700 Style Carrier) (Pin Type Mount) (Pin Type Mount) (700 Style Carrier) (Global Carrier) (700 Style Carrier) (800 Style Carrier) (Global Carrier) D120 (400 Style Carrier) D160 (400 Style Carrier) D170 (400 Style Carrier) H120 (400 Style Carrier) H130 (400 Style Carrier) H160 (400 Style Carrier) H165 (400 Style Carrier) CX (400 Style Carrier) H165 (SKID STEER Carrier) X (400 Style Carrier) H180 (400 Style Carrier) (400 Style Carrier) H180 (SKID STEER Carrier) CX (400 Style Carrier) H260 (Global Carrier) X (400 Style Carrier) H310 (Global Carrier) (400 Style Carrier) H340 (Global Carrier) CX H360 (Global Carrier) X H380 (Global Carrier) SL H260 (SKID STEER Carrier) (500 Style Carrier) H260 (400 Style Carrier) (Global Carrier) (SKID STEER Carrier) (500 Style Carrier) (Global Carrier) (SKID STEER Carrier) (500 Style Carrier) (600 Style Carrier) (Global Carrier) (SKID STEER Carrier) Page 18 of 26

36 Interfacing Quick Attach Brackets Kioti These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Koyker Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 1590 SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE KL130 SKID STEER STYLE KL1730S Skid STEER KL351 SKID STEER STYLE KL401 SKID STEER STYLE KL402 SKID STEER STYLE KL451 SKID STEER STYLE KL551 SKID STEER STYLE KL5510 SKID STEER STYLE KL6010 SKID STEER STYLE KL7320 SKID STEER STYLE KL901 SKID STEER STYLE SKID STEER STYLE KL9020 SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE SKID STEER STYLE C200 SKID STEER STYLE Page 19 of 26

37 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Kubota Kubota (cont.) Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 1001 (hook style) M1423 EURO (hook style) M310 EURO B26TLB SKID STEER M340 EURO L39 SKID STEER M415 EURO L48 SKID STEER M540 EURO LA M59TLB SKID STEER LA1001 W/ 1-3/16" PINS M720 EURO LA M940 EURO LA1002 W/ 1-3/16" PINS R520S SKID STEER LA1055 SKID STEER R530 EURO LA1153 EURO R530 SKID STEER LA1153 SKID STEER R630 EURO LA1162 SKID STEER R630 SKID STEER LA1251 KUBOTA TL1000 SKID STEER LA1301 KUBOTA TL1150 SKID STEER LA1301S SKID STEER TL1709 SKID STEER LA1353 EURO LA1353 SKID STEER LS (Leading Solutions) LA1403 SKID STEER LL3100 SKID STEER STYLE LA1601 EURO LL3101 SKID STEER STYLE LA1601 KUBOTA LL3105 SKID STEER STYLE LA1601 SKID STEER LL3106 SKID STEER STYLE LA1953 SKID STEER LL3108 SKID STEER STYLE LA2253 EURO LL3500 SKID STEER STLYE LA2253 SKID STEER LL4100 SKID STEER STYLE LA513 SKID STEER LL4102 SKID STEER STYLE LA703 SKID STEER LL5100 SKID STEER STYLE LA723 SKID STEER LL5101 SKID STEER STYLE LA724 SKID STEER LL5102 SKID STEER STYLE LA724 SKID STEER LL5103 SKID STEER STYLE LA765 SKID STEER LL5106 SKID STEER STYLE LA805 SKID STEER LL7100 SKID STEER STYLE LA823 SKID STEER LL7101 SKID STEER STYLE LA844 SKID STEER LSL1280 SKID STEER LA TL3010 SKID STEER STYLE LA853 SKID STEER TL3020 SKIS STEER STYLE LA854 SKID STEER TL3100 SKID STEER STYLE M TL4010 SKID STEER STYLE M M M Page 20 of 26

38 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Mahindra MASSEY FERGUSON (Ag) Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 115 SKID STEER STYLE (PIN STYLE) SKID STEER STYLE (PIN STYLE) SKID STEER STYLE (PIN STYLE) L SKID STEER STYLE SL (PIN STYLE) L SKID STEER STYLE HOOK TYPE PL SKID STEER STYLE (PIN STYLE) ML108 SKID STEER STYLE SL (PIN STYLE) ML108H SKID STEER STYLE HOOK TYPE ML111 SKID STEER STYLE HOOK TYPE ML112 SKID STEER STYLE SKID STEER ML114 SKID STEER STYLE HOOK TYPE ML120 SKID STEER STYLE HOOK TYPE ML130 SKID STEER STYLE HOOK TYPE ML151 SKID STEER STYLE HOOK TYPE ML170 SKID STEER STYLE HOOK TYPE ML232 SKID STEER STYLE (pin style) ML245 SKID STEER STYLE SKID STEER STYLE ML250 SKID STEER STYLE SKID STEER STYLE ML252 SKID STEER STYLE SKID STEER STYLE ML260 SKID STEER STYLE (PIN STYLE) ML262 SKID STEER STYLE (PIN STYLE) ML264 SKID STEER STYLE (PIN STYLE) ML265 SKID STEER STYLE (PIN STYLE) ML266 SKID STEER STYLE (PIN STYLE) ML270 SKID STEER STYLE (PIN STYLE) ML272 SKID STEER STYLE SL (PIN STYLE) ML275 SKID STEER STYLE (PIN STYLE) ML282 SKID STEER STYLE EURO ML285 SKID STEER STYLE EURO Manitou Bracket for Telehandler EURO EURO (PIN STYLE) EURO EURO (PIN STYLE) EURO EURO EURO EURO (PIN STYLE) EURO Page 21 of 26

39 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets MASSEY FERGUSON (Ag cont.) NEW HOLLAND (Ag) Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 955 EURO EURO EURO EURO Quick Attach EURO Pin Style DL Quick Attach DL130 SKID STEER Pin Style DL210 SKID STEER STYLE Quick Attach DL Pin Style DL250 SKID STEER DL DL260 SKID STEER Quick Attach DL280 HOOK TYPE Pin Style L200 SKID STEER STYLE L L210 SKID STEER McCORMICK C SKID STEER STYLE C SKID STEER STYLE TL SKID STEER STYLE L1080 EURO LA SKID STEER STYLE L118 EURO LA SKID STEER STYLE L130 EURO LA SKID STEER STYLE L135 EURO LA SKID STEER STYLE L140 EURO TL SKID STEER STYLE L145 EURO TL SKID STEER L150 EURO TL SKID STEER L155 EURO TL SKID STEER L160 EURO TL SKID STEER L165 EURO LA SKID STEER STYLE L175 EURO LA SKID STEER STYLE L435 EURO LB SKID STEER STYLE L446 EURO LA SKID STEER STYLE L456 EURO LB SKID STEER STYLE LC SKID STEER STYLE L720 EURO LB EURO X426 SKID STEER STYLE LB SKID STEER STYLE X431 SKID STEER STYLE TL SKID STEER STYLE TL SKID STEER STYLE TL SKID STEER STYLE LB EURO Page 22 of 26

40 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets NEW HOLLAND (Ag cont.) Stoll Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price 72LA F10 EURO LB EURO F15 EURO HD F30 EURO TL EURO F31 EURO TL SKID STEER STYLE F35 EURO TL EURO F36 EURO TL SKID STEER STYLE F4 EURO LB (TV-140,TV-145) F4 SKID STEER STYLE LB F50 EURO TL EURO F51 EURO TL EURO F60 EURO LB (TV-140, TV-145) F71 EURO LB F8 EURO TL EURO F8 SKID STEER STYLE TL EURO F80 EURO TL EURO FC350P SKID STEER L160 SKID STEER STYLE FC-450H-P SKID STEER Versatile/Ford/ NH Bi Directional FS10 EURO FS20 EURO FS30 EURO FS40 EURO FS50 EURO RHINO (Alamo, SMC) FS60 EURO Q (Pin 1-1/4") FS80 EURO Q (Pin 1-1/4") FZ10 EURO FZ20 EURO FZ30 EURO QX FZ40 EURO QX FZ50 EURO FZ60 EURO FZ80 EURO Swinger Articulated 200 Ind. SKID STEER STYLE K SKID STEER STYLE K SKID STEER STYLE Page 23 of 26

41 Interfacing Quick Attach Brackets TYM These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Westendorf Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price LT200 SKID STEER STYLE LT300 SKID STEER STYLE LT353 SKID STEER STYLE LT400 SKID STEER STYLE and LT450 SKID STEER STYLE CC LT451 SKID STEER STYLE CC LT500 SKID STEER STYLE CC LT600 SKID STEER STYLE CC LT700 SKID STEER STYLE FM LT900 SKID STEER STYLE FM TL300 (PIN STYLE) FM TA Valtra TA-111 SKID STEER STYLE EURO TA EURO TA-140 SKID STEER STY;E EURO TA-146 SKID STEER STYLE EURO TA EURO TA-160 SKID STEER STYLE EURO TA EURO TA-170 SKID STEER STYLE EURO TA-175 SKID STEER STYLE EURO TA EURO TA-180 SKID STEER STYLE EURO TA-185 SKID STEER STY;E EURO TA TA-25 SKID STEER STYLE TA TA-26 PLUS SKID STEER TA-26 PLUS TA-26 SKID STEER STYLE TA TA TA-28 PLUS TA-28 PLUS SKID STEER TA TA TA TA TA TA TA Page 24 of 26

42 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Westendorf (cont.) Woods Loader# w/ Quick Attach Part# LBS List Price Loader# w/ Quick Attach Part# LBS List Price WL WL-21 SKID STEER STYLE WL WL WL SKID STEER STYLE Wl SKID STEER STYLE WL SKID STEER STYLE WL SKID STEER STYLE WL SKID STEER STYLE WL SPEE-D CHANGE WL SPEE-D CHANGE Wl SPEE-D CHANGE WL SPEE-D CHANGE SPEE-D CHANGE WL SPEE-D CHANGE WL SPEE-D CHANGE WL SPEE-D CHANGE WL SPEE-D CHANGE WL SPEE-D CHANGE WW SPEE-D CHANGE XTA SPEE-D CHANGE XTA SPEE-D CHANGE SPEE-D CHANGE WW-24 TBA TBA LC102 SKID STEER STYLE LC108 SKID STEER STYLE White see AGCO (White) LC114 SKID STEER STYLE LC96 SKID STEER STYLE LF138 EURO LF-156 EURO LU126 SKID STEER STYLE LU132 SKID STEER STYLE Page 25 of 26

43 Interfacing Quick Attach Brackets These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems. These brackets bolt to Worksaver Front Loader Attachments, or can be welded. Note: Item No. is one pair of brackets Wrangler Loader# w/ Quick Attach Part# LBS List Price Loaders w/ Skid Steer Zetor 92 EURO EURO H EURO SLX EURO H EURO SLX EURO SLX EURO EURO SL EURO Standard Pin-on Brackets Std. Brackets 1" Pins Optional Pin-on Brackets Pin Type 3/4" Pins w/ Additional Roll Back Pin Type 1" Pins w/ Additional Roll Back Pin Type 1-1/4" Pins w/additional Roll Back Optional Lift Pin & Bushing (set of 4 bushing) Kits 1 Lift Pin Kit (4 pins) Bushing set to convert " - 1-1/4" use with lift pin kit /8" Lift Pin Kit for Std. Channel Brackets, Channel must be drilled Bushing kit 1" to " Bushing kit 1" to 1-1/4" Bushing kit 1" to 1-1/2" Set of (4) Greaseable 1.25 x 6.45 pins Page 26 of 26