INDEX. Tips can be ordered by OEM Mfg numbers or by Goss Mfg numbers.

Transcription

1

2 INDEX Goss, Inc has been manufacturing high quality replacement torch tips and torch tool equipment for over sixty years. This progress is attributed to our many satisfied customers along with the constant upgrading of our manufacturing methods and facilities. The index on right lists the popular style tips available from Goss. Quotes on other styles not listed are available upon request or may be available in our price list as discontinued. Tips can be ordered by OEM Mfg numbers or by Goss Mfg numbers. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown. Airco / Concoa...- Craftsman... Dockson... ESAB / Oxweld...- ESAB / Purox... Harris...- Meco... REXARC / Rego... Smith...- Victor...- Economy Tips... Heating Tips and Adaptors... Heating Tip Charts... Replacement Tip Nuts... Cutting and Welding Tip Charts... All charts and information contained in this catalog are intended only as an approximate guide. The type and condition of equipment, length of hose, regulator pressure settings, operator skill, etc., will affect the performance of any tip.

3 AIRCO / CONCOA AIRCO / CONCOA ACETYLENE STOCK LONG FLAME OR OXYGEN PROPYLENE MAP/PRO For general welding and brazing. /- in. thread. Sizes not for use with MAPP gas. For Goss Tip. STOCK ACETYLENE OXYGEN Light preheat. For clean surfaces, straight line and shape cutting. Fits Airco,,,,,,, 9, 9, 9 torches. STOCK ACETYLENE OXYGEN Light preheat. For hand and machine cutting. Fine contour cutting of plate. Fits Airco,,,,,,, 9, 9, 9 torches. STOCK ACETYLENE OXYGEN STOCK ACETYLENE OXYGEN Very heavy preheat. For general cutting. Also for use in cutting cast iron and stainless steel. Fits Airco,,,,,, 9, 9, 9 torches. STOCK GOUGING ACETYLENE OXYGEN Medium preheat for grooving, gouging and removing welds. Fits Airco,,,,,,, 9, 9, 9 torches. STOCK PROPYLENE MAPP OXYGEN Fits Machine Torch. Medium preheat. For hand or machine cutting. Fits Airco,,,,,, 9, 9, 9 torches. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

4 AIRCO / CONCOA AIRCO / CONCOA STOCK PROPANE OR OXYGEN Two piece tip for hand cutting. Heavy preheat. Fits Airco,,,,,, 9, 9, 9, 9 torches. STOCK PROPANE OR OXYGEN STOCK HIGH SPEED PROPYLENE MAPP OXYGEN ,, CRAFTSMAN - Fits Machine Torch. Same as Harris -A-9. See Harris section for details. Two piece tip for hand cutting. Medium preheat. Fits Airco 9,,,,,,, 9, 9, 9, 9 torches. STOCK PROPANE OR OXYGEN DOCKSON C- STOCK ACETYLENE OXYGEN C- C- C- C- C- C- Stinger style - two piece design. Hand or machine cutting. Medium preheat, for general cutting operations. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

5 ESAB / OXWELD ESAB / OXWELD STOCK Z9 Z Z Z Z9 Z Z (/ ) (/ ) (/ ) (-/ ) ( ) ( ) ( ) X X X 9 Medium preheat. For hand or machine cutting. Fits C-, CW-, C-, CW- hand torches, C-, C-9, C- machine torches. STOCK GOUGING INTERNAL STOCK Z Z Z Z9 Z Z Z STOCK Z Z9 Z EXTERNAL (/) (/) () (-/) (-/) (-) (-) -S 9-M -X C INTERNAL Hi-speed cutting, medium preheat, propane, natural gas, butane oxygen. Fits C-9, C-, C- machine torches. EXTERNAL Medium preheat. Tip has wear skid. For gouging, grooving plate edges for welding, removing defects from castings and washing. Fits C-, C-, CW-, CW- hand torches. STOCK HIGH SPEED PROPANE OR OXYGEN / / COMPLETE TIP Two piece high speed. Fits C-9, C-, C- machine torches. INTERNAL STOCK Z Z Z Z Z 9 INTERNAL General cutting, medium preheat, propane, natural gas, butane oxygen. Fits CW-, C-, CW-, C- hand torches, C-9, C-, C- machine torches. C STOCK 9 / / / PROPANE OR OR OXYGEN FG- COMPLETE TIP EXTERNAL EXTERNAL STOCK Z Z9 Z -S 9-M -X Two piece standard speed. Fits CW-, C-, C-, CW- hand torches. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

6 ESAB / OXWELD ESAB / PUROX STOCK 9 CP 9 / / PROPYLENE OR OXYGEN FG- COMPLETE TIP 9 STOCK GOUGING ACETYLENE OXYGEN K K 9 Two piece standard speed. Fits CW-, C-, C-, CW- hand torches. ESAB / PUROX - 9 STOCK L L L L L L Grooving and gouging. Fits CW-, CW-, Type E, C- and CW- torches PROPANE OR OXYGEN 9 STOCK ACETYLENE OXYGEN 9 K K9 K K K K K (/ ) (/ ) (/ ) (-/ ) ( ) 9( ) ( ) ( ) Medium preheat for general cutting. Fits CW-, CW-, Type E torches, C-, C- machine torch, CW- torches. 9 STOCK K K K K 9 PROPANE OR OXYGEN One piece general and scrap cutting. Fits CW-, CW-, Type E, C-, CW- torches. C 9 Complete tip, medium preheat. Fits CW-, CW-, C-, Type E torches. Fits CW- torches. STOCK PROPANE OR OXYGEN / / / COMPLETE TIP Two piece tip standard speed. Fits CW-, CW-, Type E, CW-, C- torches. CP 9 STOCK CP-/ / PROPYLENE OXYGEN CP-/ CP-/ CP- CP- / / COMPLETE TIP Complete tip, medium preheat. Fits CW-, CW-, C-, Type E torches. Fits CW- torches. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

7 HARRIS HARRIS A-9 9 STOCK WELDING ACETYLENE OXYGEN 9-H PROPANE OXYGEN Sizes to Tip end only. For general welding. Fits Harris -, -, -, torches with mixer. /- thread. STOCK PROPANE OR OXYGEN HEATING 9-GG STOCK GOUGING PROPANE OR OXYGEN N Fits Harris, 9AF, 9F,,,,,, series torches. STOCK PROPANE OR OXYGEN /- thread. For additional information see page. 9 STOCK ACETYLENE OXYGEN Medium preheat, general hand cutting. Fits Harris,,, A,, A,, and series torches. 9-G STOCK GOUGING ACETYLENE OXYGEN NFF STOCK PROPANE OR OXYGEN WELDNG Heavy preheat, general cutting. Two piece. Fits Harris, 9AF, 9F,,,,,, series torches. 9-NH -H Light preheat, for general cutting. Two piece. Fits Harris, 9AF, 9F,,,,,, series torches. STOCK HEAVY PROPANE OR OXYGEN 9 Fits Harris,,, A,, A, series torches. For heavy cutting of plate. Two piece. Fits Harris, 9AF, 9F,,,,,, series torches. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

8 HARRIS HARRIS 9-NX STOCK PROPANE OR OXYGEN Medium preheat. For general cutting use. Fits Harris, 9AF, 9F,,,,,, series torches. 9-VVCP STOCK HIGH SPEED PROPYLENE MAPP OXYGEN / / Two piece tip for machine cutting, 9 style. Fits Harris 9-, 9- and 9- machine torches. 9-NXP STOCK PROPYLENE OXYGEN Medium preheat. For general cutting use. Fits Harris, 9AF, 9F,,,,,, series torches. 9-VVCU STOCK HIGH 9 / / / / SPEED PROPANE OR OXYGEN High speed tips, for use in machine cutting. Fits Harris 9-, 9- and 9- machine torches. 9-S STOCK HEAVY PREHEAT STOCK 9 WELDING ACETYLENE OXYGEN General hand and machine cutting. Fits Harris,,, A,, A, 9-, 9-,, series torches. Fits Harris -,, - torches with mixer. /- thread. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

9 MECO REXARC / REGO AV AV- AV- AV- AV- AV- AV- AV- AV- AV- STOCK WELDING LA STOCK General Cutting Light duty welding and brazing. Fits aviator torches. / thread. to One piece. Fits weldmaster, cutmaster, SCA torches. KX STOCK ACETYLENE OXYGEN KX- KX- KX- KX- KX- KX- KX- MC- STOCK MC- MC- MC- MC- MC- MC- Medium preheat for hand cutting. Fits KXA, SXA, CWP 9,,,,, 9, 9 torches. SMITH - LM STOCK 9 PROPANE OR OXYGEN Two piece. Medium preheat for cutting with propane or natural gas. Fits weldmaster, cutmaster, SCN torches. SC- Medium duty hand cutting. Fits cutting assemblies Pipeliner MC, MC9, Airliner AC, AC9 STOCK SC- SC- SC- SC- SC- SC- SC- SC- SC- SC- For hand or machine cutting. Fits Silver Star (-). Cutting torches Tuf-Tony, Silver Star (-). Machine torches SC, SC, SCA, SCA (-) replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

10 SMITH VICTOR SC- 9 STOCK SC- SC- SC- SC- SC- SC- SC- SC- SC- SC- SC-9 9 GPN PROPANE OR OXYGEN Two piece heavy preheat tip for hand and machine cutting. Fits torches Silver Star, Pipe Welders Special (-), Tuf- Tony (-9). Fits machine torches SC, SC, (-). SCA, SCA, SCA (-9). VICTOR HPN STOCK -HPN -HPN -HPN -HPN -HPN -HPN -HPN MFA (TYPE ) STOCK -MFA -MFA -MFA -MFA 9 SCRAP PROPANE OR OXYGEN Scrap cutting, beveling and piercing. Fits, CA, CAN, ST, SST, STN, C, machine torches. HEATING ACETYLENE PROPYLENE OXYGEN MAPP STOCK -GPN -GPN -GPN -GPN -GPN -GPN -GPN -GPN -GPN -GPN -GPN GPP 9 STOCK -GPP -GPP -GPP -GPP -GPP -GPP -GPP PROPANE OR OXYGEN Medium preheat for hand and machine cutting. Fits, CA, CAN, ST, SST, STN, C, machine torches. PROPYLENE OXYGEN Hand or machine cutting. Fits, CA, ST, SST, C, machine torches. MTHN STOCK -MTHN -MTHN -MTHN -MTHN -MTHN -MTHN -MTHN MTHP STOCK Multiflame nozzle, for preheating and straightening. Use HD C torch with / hose, manifold if acetylene withdrawal rate exceeds / cylinder content per hour. Fits series torches. HI-SPEED PROPANE OR OXYGEN Machine cutting, two piece. Fits HC C, HC C, ST, CA, CA and CA series torches. HIGH SPEED PROPYLENE OXYGEN Machine cutting. Fits, CA, ST, SST, C, machine torches. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

11 VICTOR VICTOR W (TYPE ) STOCK -W -W -W -W -W -W -W -W -W -W -W W- (TYPE ) STOCK -W- -W- -W- -W- -W- -W- -W- -W- -W- -W- WELDING Complete nozzle (nozzle nut included). General welding and preheating. Fits series torches. WELDING Complete nozzle (nozzle nut included). Long cone flame general welding and brazing. Fits series torches. - STOCK STOCK STOCK DRAG TYPE Light preheat for plate cutting. Fits, CA, ST, SST, C machine torches RIVET Hand cutting for bulkhead rivets. Fits, CA, ST, SST, C torches. GOUGING W-J (TYPE ) STOCK -W-J -W-J -W-J -W-J -W-J -W-J -W-J -W-J -W-J -W-J - STOCK WELDING Complete nozzle (nozzle nut included) tip for general light welding and brazing. Fits J series torches. Medium preheat for hand and machine cutting. Fits, CA, ST, SST, C machine torches GPN STOCK --GPN --GPN --GPN --GPN --GPN --GPN --GPN Gouging, scarfing and deseaming. Fits, CA, ST, SST, C torches. PROPANE OR OXYGEN Two piece medium preheat series tip. Fits CA, CA, C, CA, CA, CST, C torches replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown. 9

12 VICTOR VICTOR -GPP 9 - STOCK --GPP --GPP --GPP --GPP --GPP PROPYLENE OXYGEN STOCK General purpose hand and machine cutting. Fits CA, CA, C, CA, CA, CST, C torches Medium preheat hand cutting tip. Fits CA attachment. - STOCK Medium preheat hand cutting. Fits CA, CA, C, CA, CA, CST, C torches. STOCK PROPANE OR OXYGEN - STOCK GOUGING -- Two piece series tip. Fits CA attachment. Medium preheat. Gouging Rivet washing, tip. Fits CA, CA, C, CA, CA, CST, C torches. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown.

13 THE ECONOMY LINE Cutting Tips and Tip Connectors STANDARDIZES ALL OF TORCHES PROTECTS SEAT OF TORCH HEAD INSURES ECONOMICAL TIP REPLACEMENT COSTS ECONOMY CONNECTOR TIP NUT (included with connector) ECONOMY TIP SEAT CONNECTOR SEAT CONNECTOR Airco AD- Purox AD-9 Air Products (Conical) AD- Smith SC AD- Harris 9 AD- Victor ( Series) AD- ECONOMY TIPS AND TIP NUT Part No. Used With Size of Tip Number of Preheat Tip Propane - - Tip Nut

14 HEATING TIPS AND ADAPTORS HEATING TIPS See Performance Chart Page FOR USE WITH LP, OR PROPYLENE ACETYLENE GAS PART TIP S --- THREAD / / / NOTE: No. Tip / dia. No. Tip / dia. No. Tip -/ dia. No. Tip / dia. No. Tip -/ dia. HEATING TIP ADAPTORS FOR TORCHES SEAT SMITH SC Goss Part No. - Thread /- SEAT HARRIS 9 Goss Part No. - Thread /- -S /- -S /- VICTOR SERIES - /- AIRCO AIR PRODUCTS - /- -S /- (Conical) -S /- HEATING TIP CHART & TIPS OXYGEN OXYGEN PROPANE PROPANE APPROX PRESSURE FLOW PRESSURE FLOW HEAT OUTPUT (PSIG) (CFH) (PSIG) (CFH) (BTU/HR) ,-, ,-, ,-, ,-, ,-,, Note:. Use / hose with all tips.. No. & No. may require increased pressures if hose length is over ft. HEATING TIP CHART & TIPS APPROX APPROXIMATE HEAT OUTPUT ACET PSIG CFH (BTU/HR) - lb - 9,-, - 9 lb -,-, - lb -,-, WARNING: At no time should the withdrawal rate of an individual acetylene cylinder exceed / of the cylinder content per hour for intermittent use and / of the cylinder content per hour for continuous use. If additional flow capacity is required, use an acetylene manifold system of sufficient size to supply the necessary volume.

15 REPLACEMENT TIP NUTS MFG. TORCH AND TORCH S TIP NUT STOCK AIRCO, 9,,,,, -9,, 9, 9 AIR PRODUCTS (Internal Thread) 9-U- AIR PRODUCTS (External Thread) 9-- HARRIS 9 Tips 9B -B MECO Weldmaster, Cutmaster OXWELD CW-, C-, C-, C-, C- A C-, C-9, C-, C- PUROX CW-, CW-, E 9 SMITH SC Tips G9-A VICTOR CA, CA, C, CA, 9- CST, C ( Series Tips) VICTOR, CA, CAN, ST, SST, 9- STN, C, MT, MTN ( Series Tips) TIP CHART MATERIAL THICKNESS / / / / -/ RECOMMENDED TIP NUMBER AND DRILL 9 OXYGEN PRESSURE SETTING LB/IN g FUEL GAS PRESSURE SETTING LB/IN g IN / MIN WELDING TIP CHART Tip Size Drill Size Oxygen Pressure P.S.I. Acetylene Pressure P.S.I. Acetylene Consumption CFH* * Oxygen consumption is. times the acetylene under neutral flame conditions Metal Thickness Min. Max. Min. Max. Min. Max. / / / up to / / -/ / -/ / -/ / -/ / -/ 9 / -/ 9 / -/ / -/ / --/ / / 9 -/ - --/ -/ - Gas consumption data is merely for rough estimating purposes. It will vary greatly on the material being welded and the particular skill of the operator. Pressures are approximate for hose length up to ft. Increase for longer hose lengths about psi per feet.

16 SAFETY INFORMATION Listed below are various standards that provide detailed safety instruction. It is recommended that prior to using any welding, cutting or heating equipment, you fully understand and comply with these or other current safety standards.. AWS Standard A., WELDING AND CONTAINERS WHICH HAVE HELD COMBUSTIBLES, obtainable from the American Welding Society, Le Jeune Road, P.O. Box, Miami, FL.. NFPA Standard, OXYGEN-FUEL GAS SYSTEMS FOR WELDING AND, obtainable from the National Fire Prevention Association Atlantic Avenue, Boston, MA.. NFPS STANDARD B, AND WELDING PROCESSES, obtainable from the National Fire Prevention Association, Atlantic Avenue, Boston, MA.. CGA Pamplet P-, SAFE HANDLING OF COMPRESSED GASES IN CYLINDERS, obtainable from the Compressed Gas Association, Fifth Avenue, New York, NY.. CSA Standard W., CODE FOR SAFETY IN WELDING AND, obtainable from the Canadian Standards Association, Standard Sales, Rexdale Blvd., Rexdale, Ontario, Canada M9W R.. ANSI Standard Z., PRACTICE FOR RESPIRATORY PROTECTION, obtainable from the American National Standards Institute, Broadway, New York, NY.. ANSI Standard Z9., SAFETY IN WELDING AND, obtainable from the American Welding Society, Le Jeune Road, P.O. Box, Miami, FL.. OSHA, OCCUPATIONAL SAFETY AND HEALTH STANDARDS, 9CFR 9, obtainable from the U.S. Department of Labor, Washington, DC. 9. ANSI Standard Z., SAFETY PRACTICES FOR OCCUPATION AND EDUCATION EYE AND FACE PROTECTION, obtainable from the American National Standards Institute, Broadway, New York, NY.. ANSI Standard Z., STANDARD FOR SAFETY TOE FOOTWEAR, obtainable from the American National Standards Institute, Broadway, New York, NY.. ANSI Standard Z9., FIRE PREVENTION IN USE OF AND, WELDING PROCESSES, obtainable from the American National Standards Institute, Broadway, New York, NY.

17 NOTES

18 CROSS REFERENCE TO NUMBERS AIRCO C C MECO - CP 9 AV - ESAB / PUROX LA -GPN 9 LM -GPP 9 - C REGO KX- SMITH MC CP 9 SC- HARRIS SC- 9 9-H VICTOR 9 GPN CRAFTSMAN 9-G GPP GG HPN 9-N MTHN DOCKSON C- ESAB / OXWELD 9-NFF 9-NH 9-NX 9-NXP 9-S -H MTHP MFA RTE W 9 9-VVCP W-I 9-VVCU W-J -A-9 - Accuracy as to part numbers and information is not guaranteed in this catalog. INC. ROUTE, GLENSHAW, PA. - PHONE: () - FAX () - -- / -- IN PA. replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other manufacturers shown. Copyright 9 INC. FORM D- //