CNC ANGLE LINE OVERVIEW
|
|
- Hugo Gilbert
- 7 years ago
- Views:
Transcription
1 CNC Angle Line The Ocean Clipper CNC ANGLE LINE OVERVIEW IS THE OCEAN CLIPPER CNC ANGLE LINE THE RIGHT ANGLE LINE FOR ME? This American made clip angle processing machine has been especially designed for the structural steel fabricator to eliminate costly layout and manual drilling procedures and to fabricate larger profiles in less time. By expediting processing times through elimination of human labor, fabricators achieve greater profits while greatly increasing their tonnageper-month and tonnage-per-employee outputs. The Ocean CLIPPER CNC Angle Line can be installed in any structural steel fabrication shop or other operation where layout and punching of clip angles or similar parts is required. It is capable of processing angles from as small as 1-1/2 x 1-1/2 x 1/8 all the way up to 6 x 6 x 5/8 MAIN CHARACTERISTICS OF THE OCEAN CLIPPER ANGLE LINE
2 Ability to process short clip angles as well as long bracing angles. Eliminates manual layout, and manual drilling / punching Provides exceptional accuracy of hole placement, eliminating costly field modifications Easy installation by fabricator Very space efficient no bigger than most ironworkers Simple and easy to operate No computer experience required Fully automatic punching, drilling, and shearing cycle Immediate payback on a low investment through attractive finance options THE TRUTH ABOUT ANGLE LINES Most fabricators who have angle lines will tell you that they seldom run their angle lines all day - they normally run in short bursts producing enough clip angles to provide the fitters clips to last the shift or possibly several shifts. Despite only running a few hours a day, angle lines still make great economic sense - producing perfectly accurate clip angles in the fastest possible time, eliminating huge amounts of expensive man hours, and eliminating errors. These clip angles fit up faster due to their accuracy and the fabricator never has to wait for his steel merchant to deliver clips. But it was this knowledge that the average fabricator would only run his Angle line a few hours a day, that prompted Ocean Machinery and Peddinghaus to produce a completely unique machine that would do it faster and cheaper than any other angle line on the market, and at last make angle lines affordable for the small to medium fabricator. We closely studied the clip angle market in the USA and the rest of the world, and realized there was an opportunity for a machine that was more compact and more affordable than the current offerings. We noticed too, that over 85% of all clip angles feature round holes in one leg and slotted holes in the other leg, and this led us to our design approach. MAKE IT MORE COMPACT AND MAKE IT MORE AFFORDABLE! ANGLE LINE - UNIQUE DESIGN - PUNCH, DRILL AND SHEAR
3 To achieve our design approach we needed to reduce the overall size of the typical angle line. In doing so we would also help to reduce the cost of the machine as well. In all angle punch lines, the opposing punches cannot be set on the same X-axis datum line as they are too large and have to overlap - this means that the angle is positioned for the first leg punch, the hole is punched, and then the angle has to be fed in the X-direction at least 6 inches before the opposing leg can be punched. This makes for a long machine, as well as an expensive machine. It also has the additional down side of having a long "drop" (the length of angle that cannot be processed) Click thumbnails for larger image This situation allowed us to design an angle line that is vastly different from all the other angle lines on the market. The Ocean Clipper uses a drill spindle in combination with the traditional punch and shear that is typically found on other angle lines. By using a drill/punch combo, the punch and drill can be positioned directly opposite each other - something that is not possible with traditional punch systems. This allowed us to shorten the overall length dramatically. The Ocean Clipper CNC angle line is absolutely unique in the marketplace, and it is the most compact CNC angle line that is capable of processing steel angle sections up to 6'x6'x5/8" (150x150x16mm). SMALL FOOTPRINT FOR THIS UNIQUE ANGLE LINE This allows the entire machine size to be reduced, making the Ocean Clipper CNC angle line the most compact CNC Angle line in the world. The end plates containing the punching and drilling stations are only 16" apart and the overall length of the machine (excluding the feeding roller conveyor) is less than 3ft". Because the drill and the punch are in-line, holes in both legs can be made without having to jog the material forward, something that has to happen on regular angle lines. This shortens the overall processing time significantly and it also makes the "drop size" the smallest in the industry at only 8-1/8" completely eliminating the need for a welding station.
4 BUILT FOR SERIOUS DUTY Despite its compact size, the Ocean Clipper Angle Line is designed for heavy duty work in the toughest fabricating shops in the world. It uses the same hydraulic spindle as found on the Ocean Avenger Beam Drill Line. This virtually bulletproof drill spindle is 13-3/4 HP and is capable of drilling through 10" of steel. And being hydraulic makes it almost maintenance free. Maximum hole diameter is 1-9/16" The 75 Ton Hydraulic Punch is One of Peddinghaus's standard heavy duty units and its punching cycle is less than 2 seconds. It has a maximum slot size of 1-1/4" (Standard 270 punches) Standard inexpensive Peddinghaus punches and dies are available from Ocean machinery. The robust 100 Ton Double Cut Shear has a cycle time of only 5 seconds and shears steel to 5/8" thick, with a drop of only 1/2" For 4x4x3/8" angle or smaller an optional single cut blade will eliminate the drop With the Ocean Clipper, Peddinghaus and Ocean Machinery have succeeded in creating a powerful yet compact clip angle processing machine that eliminates another costly labor area in steel fabricating.
5
Agate Steel Inc.: Writing Their Own Story
Agate Steel Inc.: Writing Their Own Story L to R: Loren Kuenzi (Shop Superintendent), Nancy Palmer (CFO), Les McCauley (Vice President), and Jim Uhl (President and CEO) of Agate Steel, Inc. in Scottsdale,
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationSERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationSheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
More informationMachine Tool Facilities
TECHNOLOGY 1721 LARKIN-WILLIAMS ROAD FENTON, MO 63026 IN C. 636/349-7680 FAX: 636/349-6608 Machine Tool Facilities CNC SWISS MACHINES (1) Citizen C-16 Contouring, Threading, Milling, Slotting, Cross Work
More informationTUBULAR Holing and Slotting Of Casing
TUBULAR Holing and Slotting Of Casing Holing and Slotting of Casing Introduction.................. 243-244 Slotting machines Hydraulic Handling System Holing Machines Deburring Pipe coating Banding QA
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationSHEET METAL DESIGN HANDBOOK
SHEET METAL DESIGN HANDBOOK Forming Basics. 2 Critical Dimensions Embosses and Offsets Bend Radius Bend Relief Forming Near Holes Form height to thickness ratio Edge Distortion Laser cutting 5 Tolerances
More informationRotary Parts Accumulator
The Perfect Bar Feed Companion Rotary Parts Accumulator Patent Pending - Eliminate Part Damage - Run Your CNC Lathes Completely Unattended for Hours at a Time - Keep Parts in Order for QC Purposes - Pays
More information220V CNC 3020T-DJ upgrade from 3020T 3020 Router with 230W 11000RPM spindle
Experiments with CNC In april 2013 I decided to buy a CNC machine. I did not need it for serious production, I just wanted to learn something new. I was looking around for the cheapest CNC available and
More information:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationFeatures IMC Precision Link Conveyors are ideal for linear transfer applications with features including:
Features IMC Precision Link Conveyors are ideal for linear transfer applications with features including: Table Top or Heavy Duty versions Precision positioning of parts for assembly or manufacturing processes
More informationLamination Production. by: John Roberts / Sko Die, Inc
Lamination Production by: John Roberts / Sko Die, Inc Presentation Mission Understand the construction for magnetic cores Chose the best methods for producing Magnetic cores are constructed From soft magnetic
More information14. Mechanisation. and Welding Fixture
14. Mechanisation and Welding Fixture 14. Mechanisation and Welding Fixtures 197 As the production costs of the metal-working industry are nowadays mainly determined by the costs of labour, many factories
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationPBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com
CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame
More informationMaterials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
More informationSprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled
SprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled machines and machining centers. The system enables the creation
More informationMEGA GUARD COLUMN CORE GUARD DAWG COLUMN PROTECTOR. Smart Investments in Plant Safety
MEGA GUARD COLUMN CORE GUARD DAWG COLUMN PROTECTOR Smart Investments in Plant Safety TM Solid Steel Protection Steel King is committed to making your workplace safer. Our current products exceed industry
More informationBasic Principles & Common Practices
DETAILING STAIRS: Basic Principles & Common Practices Figure 1: Stair Terminology By Andrew J. Bellerby This article is designed to provide an introduction to detailing stairs. It explains the basic principles
More informationSheet Metal Stamping Dies & Processes
Training Objectives After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of the stamping process and the die systems used to form sheet metal.
More informationMilling Tools These are the tools currently available for use with the milling machine
Jason Ward Page 1 of 5 Milling Tools These are the tools currently available for use with the milling machine T1 Milling Tool The missile-shaped T1 milling tools are the highest precision of T-Tech's milling
More informationBolting: Attachment Of The Mudsill To The Foundation
Bolting: Attachment Of The Mudsill To The Foundation If the mudsill of a house (the pink area in the illustration at right) is not bolted, the lateral loads (back and forth motions) of an earthquake can
More informationF R O M O N E P R O F E S S I O N A L T O A N O T H E R RECTOR M A C H I N E W O R K S
F R O M O N E P R O F E S S I O N A L T O A N O T H E R RECTOR M A C H I N E W O R K S 1 Committed to customer satisfaction. OUR MISSION OUR MISSION is committed to customer satisfaction by being a leader
More informationPoint K2. D ouble D ynamic T ransport. Vitap.com
Point K2 D ouble D ynamic T ransport 1 Vitap.com X Jobs Catalogue Optimize panel cutting A compact CNC machine that can achieve the following functions: Drill holes in 5 directions & perform grooving operations
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More informationRadius Compensation G40, G41, & G42 (cutter radius compensation for machining centers, tool nose radius compensation for turning centers)
Radius Compensation G40, G41, & G42 (cutter radius compensation for machining centers, tool nose radius compensation for turning centers) These features are commonly well covered in most basic CNC courses.
More informationProduct Guide SaraDrill
Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid
More informationDISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP
SPERBER I ECOTRAK BUSSARD I SEEADLER DISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP SPERBER BUSSARD SEEADLER ECOTRAK DISC HARROWS WITH REAR WHEEL AXLE www.rabe-gb.de STUBBLE CULTIVATION Todays
More informationDo-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow
Do-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow This press can be built from readily available metal. Materials and dimensions need not be exactly what is shown here. Much of the material
More informationA long-established trading company that deals in 1,300 tons of steel products every month.
Case Study KAMATA SPECIAL STEEL CO.,LTD. Profitability has increased through the improvement of material yield and reduction of labor. A long-established trading company that deals in 1,300 tons of steel
More informationKeen on Small Quantities
Keen on Small Quantities The 2 Series: HOLZMA The 2 Series 1 For all those with great plans Plenty of power and functionality at a low cost. It is this combination that makes the HOLZMA 2 series the number
More informationReliable Metal Bending
Reliable Metal Bending Since 1984 Welcome to Bendpro CNC Mandrel Bending Our commitment to you... P3 Accuracy Guaranteed Quick response quotes F.I.S. freight inclusive pricing Short lead-times 25+ years
More informationThe Impact of the Flexo Folder-Gluer on Packaging Distribution. Alexandra Hartford Michigan State University School of Packaging
The Impact of the Flexo Folder-Gluer on Packaging Distribution Alexandra Hartford Michigan State University School of Packaging A322 Bailey Hall East Lansing, MI 48825 hartfor5@msu.edu 231.884.4840 Table
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationSHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationIKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
More informationHamilton Form Company, Ltd Custom Designs, Flexible Solutions
Hamilton Form Company, Ltd Custom Designs, Flexible Solutions 1 IFC 2 CUSTOM DESIGNS, FLEXIBLE SOLUTIONS Hamilton Form has been designing and building custom steel forms for the precast industry since
More informationCNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
More informationROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
More informationActivity 2.3b Engineering Problem Solving Answer Key
Activity.3b Engineering roblem Solving Answer Key 1. A force of 00 lbs pushes against a rectangular plate that is 1 ft. by ft. Determine the lb lb pressure in and that the plate exerts on the ground due
More information1) Cut-in Place Thermoforming Process
Standard Thermoforming Equipment Overview There are three standard configurations for thermoforming equipment: 1. Heat and Cut-in-Place Forming 2. In-Line Forming with Steel Rule or Forged Steel Trim wand
More informationOriginal Recipe. Cathedral Window Baby Playmat by Amy Gibson
Original Recipe Cathedral Window Baby Playmat by Amy Gibson Hi! I'm Amy Gibson of Stitchery Dickory Dock {stitcherydickorydock.com} and I'm so excited to share a recipe with you today! If you're like me,
More informationSUPPLEMENTAL TECHNICAL SPECIFICATIONS BI-DIRECTIONAL STATIC LOAD TESTING OF DRILLED SHAFTS
July 14, 2015 1.0 GENERAL BI-DIRECTIONAL STATIC LOAD TESTING OF DRILLED SHAFTS This work shall consist of furnishing all materials, equipment, labor, and incidentals necessary for conducting bi-directional
More informationEVOLUTION 7403 7405. Complete CNC Machining in Compact Format. provides for complete machining on all 4 workpiece edges as well as the surface.
Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling Complete CNC Machining in Compact Format EVOLUTION 7403 7405 Unique! The EVOLUTION 7405 4mat provides for complete
More informationtransformer division Convincing with outstanding solutions: Leading technology for transformer production.
transformer division Convincing with outstanding solutions: Leading technology for transformer production. With a passion for technology we at Georg have been developing inspirational solutions for generations
More informationEVOLUTION 7405. Complete CNC Machining in Compact Format. provides for complete machining on all 4 workpiece edges as well as the surface.
Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling Complete CNC Machining in Compact Format EVOLUTION 7405 Unique! The EVOLUTION 7405 4mat provides for complete machining
More informationTABLE OF CONTENTS. INTRODUCTION... 5 Advance Steel... 5 Where to find information?... 6
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Steel... 5 Where to find information?... 6 INSTALLATION... 6 System requirements... 6 Starting the installation... 6 STARTING ADVANCE STEEL...
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationToll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com
Toll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com Supercharge your Fence & Gate Manufacturing Only $3,650! Vogel s 25 Ton Power Tower Model Tonnage Power Requirements Power Connection
More informationLED MACHINE ILLUMINATIONS
white LED light industrial-suited housing energy-efficient ipf electronic gmbh Kalver Straße 25-27 58515 Lüdenscheid Germany fon +49 (0) 2351/9365-0 fax +49 (0) 2351/936519 e-mail: info@ipf-electronic.com
More informationMECHANICAL ENGINEERING PLANT LAYOUT AND MATERIAL HANDLING UNIT I
MECHANICAL ENGINEERING PLANT LAYOUT AND MATERIAL HANDLING UNIT I 1. Which of the following is a strategic decision? [ B ] A. Facilitates location B. Plant location C. Plant layout D. Resources location
More informationMoME/ MoARD/ GTZ-Sustainable Utilization of Natural Resources for Improved Food Security Program. Manual for Production of a Household Rocket Stove
MoME/ MoARD/ GTZ-Sustainable Utilization of Natural Resources for Improved Food Security Program Manual for Production of a Household Rocket Stove Tikikil Ministry of Agriculture and Rural Development
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationDetailCAD. AutoCAD Based Steel Detailing Software THE VERSATILE PROGRAM THAT FITS ALL YOUR NEEDS. Visit our web site at detailcad.com today!
DetailCAD AutoCAD Based Steel Detailing Software THE VERSATILE PROGRAM THAT FITS ALL YOUR NEEDS Visit our web site at detailcad.com today! DetailCAD AutoCAD Based Steel Detailing Software The easiest,
More informationTransmission Foundations. helical piles and guy anchors for transmission structures. www.hubbellpowersystems.com
Transmission Foundations helical piles and guy anchors for transmission structures www.hubbellpowersystems.com Grid locked on your transmission job? Instant Foundation helical piles go places concrete
More informationSection. Tolerances. Aluminum Extrusion Manual. 4th Edition
Section 8 Tolerances Aluminum Extrusion Manual 4th Edition Section 8 How straight is straight enough? How flat is flat enough? How uniform must a wall thickness be in order to be acceptable? These are
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationPUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
More informationCNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines
CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for
More informationSICAM Software. (Structural Information for Controlled Automation Machinery)
SICAM Software (Structural Information for Controlled Automation Machinery) SICAM S O F T W A R E Controlled Automation has developed software for controlling steel fabrication machinery for over 20 years.
More informationBelt and Roller Conveyor for boxes and containers
logiss srl 38068 Rovereto (TN) Italy Viale del Lavoro, 16/E (ZI) Tel. +39 0464 401121 Fax. +39 0464 423077 Mail technical@logiss.eu Web Belt and Roller Conveyor for boxes and containers A wide range of
More informationEdyce Ingenieria: Being on Top at the Bottom of the World
Edyce Ingenieria: Being on Top at the Bottom of the World Daniel Gonzalez (left), Production Manager, and Sergio Rocco, CEO of Edyce, are committed to technologies which improve the management of their
More informationThe world leader in conveyor pulleys
The world leader in conveyor pulleys You ask. We Deliver. Chantland pulleys and rollers come in virtually any diameter, wall thickness, length, shaft size or end type. They re built from stainless steel,
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationSeed Bed Combination Korund 8
Seed Bed Combination Korund 8 2 Basis for optimum crop establishment The constant strive to control input costs, coupled with the need to optimise timing of crop establishment, demands machines which combine
More informationSEMFWE232 SQA Unit Code H2BN 04 Cutting plate and sections using shearing machines
Overview This standard identifies the competencies you need for cutting and shaping metal plate and sections (3 mm thickness and above) for fabrications using guillotines and section cropping machines,
More informationThe Basics of a Rotary Table with Cross Slide mounted on a Mill Table, Version 2
The Basics of a Rotary Table with Cross Slide mounted on a Mill Table, Version 2 by Gerry Goldberg as told to Rick Sparber 08/21/2008 Copyleft protects this article. On 08/16/2008 the Valley Metal Club
More information3 Axis CNC Machine - MDF Plans and Cut List
3 Axis CNC Machine - MDF Plans and Cut List Copyright 2008 Patrick Hood-Daniel - The user of these plans assumes all responsibility for his or her actions during the process of using these plans. 2'-5
More informationIndustrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationLaser punch combination increases productivity and flexibility at Québec contract manufacturer
A Good Marriage >>>> Laser punch combination increases productivity and flexibility at Québec contract manufacturer In 1978, Clément Bussières founded Recouvrements Métalliques Bussières (RMB), St. Henri
More informationSTOCK LIST & BUYER S GUIDE
STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500
More informationTruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among
More informationMechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1
381 Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1 Abstract Welded Steel Pipe (WSP) is arguably the most widely utilized pipe material for the transmission of water throughout
More informationHOLZMA HPP 350 with Cadmatic 4.0
Holzma s HPP 350 is a flexible saw center. This CNC controlled machine features fast, simple programming coupled with high operating speeds to meet today s varied production requirements. Designed for
More information5.2. Overview. The better method to install solderless compression connectors on power cable
5.2 Overview The better method to install solderless compression connectors on power cable The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree
More informationHigh Strain Dynamic Load Testing of Drilled Shafts
Supplemental Technical Specification for High Strain Dynamic Load Testing of Drilled Shafts SCDOT Designation: SC-M-712 (9/15) September 3, 2015 1.0 GENERAL This work shall consist of performing high-strain
More informationCutting and Shearing die design Cutting die design
Manufacturing Processes 2 Dr. Alaa Hasan Ali Cutting and Shearing die design Cutting die design A stamping die is a special, one-of-a-kind precision tool that cuts and forms sheet metal into a desired
More informationPrecision Manufacturing Program
Precision Manufacturing Program Conventional Precision Manufacturing (CPM) Certificate Program During this program, students learn about subjects that form a solid foundation for a career in manufacturing.
More informationGate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
More informationFor mechanical & hydraulic presses Inch & metric taps
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Professional IDT TM In-Die Tapping Catalog For mechanical & hydraulic presses Inch & metric taps www.danly.com Professional IDT TM In-Die Tapping Service
More informationSmall Square Bale Handling
Small Square Bale Handling Introduction 2 Why Small Squares? In the past 35 years we have seen a lot of changes in the way hay is handled. Much hay production has moved from using small square bales handled
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationHEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com
More informationModel RC Armature-Slot- Insulation Folder
Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide
More informationDurmazlar has aimed continous development since 1956
Head Quarter & Ataevler Durmazlar has aimed continous development since 1956 Owes one of the world s most contemporary production plants in the production technology business.3 different plants oriented
More informationfirst look at GigaCrete s revolutionary new New Construction GigaHouse GigaHouse Utilizing GigaPanel
first look at GigaCrete s revolutionary new New Construction GigaHouse GigaHouse Utilizing GigaPanel What is GigaCrete GigaCrete is a family of products based on low carbon footprint Green ceramic binders
More informationIt simply works! Safe process monitoring.
It simply works! Safe process monitoring. A solution that simply works. It simply works: BK Mikro All safely under control: In automated manu facturing there is an enormous range of possible uses for the
More informationWhitepaper. Modular Substation Cable Termination Design. Author: Allan Bozek P.Eng, MBA, EngWorks Inc, Calgary, Canada
Whitepaper Modular Substation Cable Termination Design Author: Allan Bozek P.Eng, MBA, EngWorks Inc, Calgary, Canada Abstract The methods for cable penetrations into modular industrial substations are
More informationFREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationCNC TURRET PUNCH PRESSES STRIPPIT P-SERIES
CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES S T R I P P I T P - S E R I E S Efficient & Productive L VD Strippit s P-Series CNC turret punch presses offer a high level of efficiency and productivity in
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More informationUNIVERSITY TIME-TABLE SCHEDULING SYSTEM: DATA- BASES DESIGN
UNIVERSITY TIME-TABLE SCHEDULING SYSTEM: DATA- BASES DESIGN Dr. Samson Oluwaseun Fadiya, Management Information System (PhD) Girne American University, Mersin 10 via Turkey, Email: samsonfadiya.gau.edu.tr
More informationTurning Centres. MAX 5 From print to part to profit
Turning Centres MAX 5 From print to part to profit TMi and TMXi General purpose, heavy duty and high performance 2 axis lathes > TM6i > TM12i > TM8i > TM18i > TM10i > TM18Li > TMX8i > TMX10i Benefits of
More information