HIGH VOLTAGE COURSES 2014

Transcription

1 HIGH VOLTAGE COURSES 2014 The school offers different High Voltage Courses for electricians, technicians, engineers and engine officers, working on various ships and offshore installations. FÆRDER VIDEREGÅENDE SKOLE, AVD. KORTEN P.O.BOX 43 tel TØNSBERG fax NORWAY Visiting address: Nordbyen TØNSBERG [email protected] or [email protected]

2 HIGH VOLTAGE COURSES HISTORY In order to meet new regulations given by the Norwegian Maritime Directorate ( NMD) = ( SD ), Tønsberg Maritime Videregående Skole (TMVS), now named Færder videregående skole (FVGS) initiated in 1983, High Voltage courses specifically designed for Norwegian electricians working on vessels and oilrigs. Through the years more than 1000 Norwegian electricians have passed our courses. The following is an extract of current Regulations from Norwegian Maritime Directorate regarding general qualifications requirements and mandatory certificates of competency on board Norwegian Vessels concerning qualifications for ship electricians laid down by Regulation of 29 April 1998 serie F 3/98 14 nr.7. High Voltage electricians. On board installations from 1000 VAC or 1500 V DC the responsible electrician ( safety manager) need High Voltage Certificate or documentation of High Voltage competency must obtain 3 months practical training in operation and maintenance of the High Voltage installation on board Norwegian Ships, Drilling Vessels or other Mobile Offshore Units, together with accepted High Voltage course. - - In 1999 our first course in English was tailored for American chief engineers employed in the American shipping company, Arco. Due to an increasing number of High Voltage installations on board ships we have been asked from various shipping companies to arrange international courses in English for electricians and chief engineers. In the year 2000 several courses were arranged both in Norwegian and English. Current courses on offer are listed below. THE COURSES H-01 Ten days (100 hrs) training for Norwegian electricians according to the regulations above. This is an SD (Norwegian Maritime directorate) certified HV course for Safety Manager with 3 months additional training on board a HV installed ship. H-02 Five days (40 hrs) course for engineers and electricians. This course will give knowledge and understanding of maritime HV installations and safety working procedures. Courses in English will be arranged on request. Special courses can be designed for your requirements/needs. Yearly 1-2 days refreshing courses in safety for High Voltage/Low Voltage (FSE) can be arranged. Some of the courses are available in other locations on request.

3 HANDS ON SESSION After the theoretical part with rules, regulations and safety video, the participants will get a chance to practice in our laboratory. - safety measures related to work on-or close to earthed and short-circuited installations and - work on or close to High Voltage installations. The main switchboard 6,6 kv is supplied from a step up transformer 0,23 / 6,6 kv. The participants take part in end terminations and joints on PEX and offshore cables. The school has a training cabinet containing the new maintenance-free vacuum interrupter VM1 and a comprehensive main protecting device REM 543 for generators and lmotors from ABB. At NEFI High Voltage test laboratory Røed Skien the participants have a demonstration of an arc shorting Shortcurrent 8 ka Voltage 7,5 kv. (Only Course H-01)

4 COURSES IN 2014 Course H-01 HIGH VOLTAGE COURSE FOR NORWEGIAN ELECTRICIANS Duration: 10 days (100 hrs.) Price: NOK ,00 Course H-02 HIGH VOLTAGE COURSE FOR TECHNICAL PERSONNEL Duration: 5 days (40 hrs.) Price: : NOK ,00 Dates: Febr. 3 rd -12 th June 16 th -25 th September 15 th -24 th Nov. 17 th -26 th Dates: March 3 rd - 7 th April 7 th 11 th August 25 th -29 th October 27 th -31 st Times: Starts 12 noon day one, the other days 8 am. Times: Starts Monday 9 am- Friday 3 pm the other days 8 am 4 pm. Objective: Norwegian electricians/engineers with ships electrical certificate who have after the course completed 3 months training on board are qualified High Voltage electrician on board ships and mobile oilrigs. Course content: Why High Voltage? Preventive maintenance. Consequences of short circuit. Installations, generators, motors and switchboards. Vacuum, SF 6 breakers. Arc Guard system, Is limiter. Cable theory and cable exercises. Safety procedures. Regulations. FME, FSH. Diesel electric. First Aid. The participants visits ABB Skien and short circuit test at NEFI teststation at Røed, Skien. Voltage test, earthing and safety procedures are carried out in our High Voltage room on 6,6 kv main switch board. Cable exercises: End terminations and joints. Each participant will receive a certificate after completion of the course. Objective: To give engineers and electricians who have the responsibility of the technical installations on board, knowledge and understanding of safety working procedures for high voltage installations. Course content: Why High Voltage? Preventive maintenance. Consequences of short circuit. Installations, generators, motors and switchboards. Vacuum, SF 6 breakers. Arc Guard system, Is limiter. Cable theory and cable exercises. Safety procedures. Diesel electric. Voltage test, earthing and safety procedures are carried out in our High Voltage room on 6,6 kv main switchboard. Cable exercises: End terminations. Each participant will receive a certificate after completion of the course. The courses might be arranged in English on request.

5 ACCOMODATION AND LOCATION Special room rates have been negotiated on at the two hotels mentioned below. If you wish to benefit from these rates, please send booking directly to the hotel and refer to Færder School: Thon Hotel Brygga, Nedre Langgate 40, 3126 Tønsberg. Tel Booking: [email protected] Fax: Quality Hotel Tønsberg, Ollebukta 3, 3126 Tønsberg. Tel Booking: [email protected] Fax: Tønsberg, the oldest town in Norway (1100 years old), is situated on the shore of the Oslofjord. The distance to Oslo is 100 km. and 1 ½ hrs by train. Norway`s main airport Oslo Airport Gardermoen is reached within 2 ½ hrs. from Tønsberg. The nearest airport is Sandefjord Airport Torp (TRP). The airport has several departures daily to Sweden, Denmark, England and Holland. Oslo Airport Gardermoen Oslo Tønsberg Sandefjord Airport Torp

6 GENERAL INFORMATION The fee covers all the course material such as: Course folder Cables Visit to ABB and Nefi industries in Skien (only H01) HV Regulations. Lunch Note! Cancellation later than one week before start requires full payment. The school has the right to cancel the course when few participants are registered. REFERENCES Acergy Group Amoco Norway Oil Co BP Norge AS Color Line Det Norske Veritas DOF Management DSB Esso Norge FFI Fartøykontoret Knutsen OAS Shipping Maersk NCL Cruises Rasmussengruppen RCCL Cruises Rederiet H. R. Myhre Rieber Shipping Seadrill Offshore AS Sjøforsvaret Solstad Shipping AS Songa Offshore Sonsub A/S Smedvig Offshore AS Star Cruises Statoil Stena Offshore Stolt Comex Seaway Stolt-Nielsen Seaway Stolt- Rederi AS Technip Norge AS Technocean AS Teekay Marine Services Transocean Ugland Offshore Wilhelmsen Ship Mangement (Norway) AS