LSUHSC Enterprise Networking
|
|
|
- Arron Matthews
- 7 years ago
- Views:
Transcription
1 LSUHSC Computer Services 433 Bolivar Street New Orleans, LA Phone LSUHSC Enterprise Networking Cabling Infrastructure: Design & Installation Standards Addendum 1: Preferred Vendor and Part Numbers Last Revised: April 25, 2011
2 Table of Contents Section 1.01 Cable Management... 4 Section 1.02 Cable Runway... 4 Section 1.03 Cable Wraps... 4 Section 1.04 Cable Tray and Support... 5 Section 1.05 Faceplates... 5 Section 1.06 Fiber Optics... 6 Section 1.07 Grounding Busbar... 6 Section 1.08 Labels... 7 Section 1.09 Modular Jacks... 7 Section 1.10 Patch Cables... 7 Section 1.11 Patch Panels... 8 Section 1.12 Standard Rack... 8 Section 1.13 Surface Mount Raceway... 8 Section 1.14 UTP Cabling
3 Brand Name DisclaimerThe cable plant constitutes the lowest layer of the OSI network model - the physical layer. As such, it is the foundation of the network, used to transport all data, voice, video, access control and environmental monitoring systems to their destinations. As more and more systems traverse this physical layer, reliability becomes key. And to ensure this reliability, we need to ensure compatibility between products which comprise this system so that we can avoid any interoperability issues. Within this document, many components are specified by Manufacturer, Part Number and/or Brand Name. These are the parts that have been adopted by LSUHSC not only due to interoperability but also because they exceed all ANSI TIA/EIA specifications. The LSUHSC in-house wiring group has been trained to install and support these products. To deviate from using these parts would require significant investment for additional training, tools and a separate spares inventory to support the new products. It is highly recommended that all installations utilize these specific brands to maintain compatibility and interoperability with the existing installed systems. To help maintain reliability at the physical layer, all deviations from the LSUHSC preferred brands should conform to the minimum product specifications outlined within this document. 3
4 Section 1.01 Cable Management Chatsworth CCS, Double-Sided for 3 D Racks, 7 x 10 x (2.1 x 250 x 310) Chatsworth UHCM, Double-Sided, 2U x 19 x (297) Section 1.02 Cable Runway Chatsworth 18" Universal Cable Runway Chatsworth Butt-Swivel Splice Kit Chatsworth Junction Swivel Splice Kit Chatsworth Vertical Swivel Splice Kit Chatsworth Elevation Kit Chatsworth Rack-to-Runway Mounting Kit Chatsworth Protective End Caps For Runway Chatsworth Butt-Splice Kit Chatsworth Junction-Splice Kit Chatsworth J-Bolt Kit Chatsworth Threaded Ceiling Kit Chatsworth Wall Angle Support Kit Chatsworth Triangular Support Bracket, Steel Chatsworth Cable Runway Corner Bracket Chatsworth Cable Runway Radius Drop Section 1.03 Cable Wraps AX Velcro Cable Ties, 25 per Roll, 8" AX Velcro Cable Ties, 25 per Roll, 12" 4
5 Section 1.04 Cable Tray and Support Caddy CAT32 Erico J-Hook CF 105/300EZ Cablofil Cable Tray PRECLICK Cablofil Preclick Splice SWK Cablofil Splice Washer Kit FASPCH 450 Cablofil Support - Hanging Section 1.05 Faceplates CBEEIY Panduit Faceplates - Executive Series, Electric Ivory CBEIGY Panduit Faceplates - Executive Series, International Gray CHSRE2EI-X Panduit Faceplates ½ Size Sloped Recessed Insert, Electric Ivory CHSRE2IG-X Panduit Faceplates ½ Size Sloped Recessed Insert, International Gray CMBEI-X Panduit Faceplate Blank Module, Electric Ivory CMBIG-X Panduit Faceplate Blank Module, International Gray CHB2EI-X Panduit Faceplate ½ Blank Insert, Electric Ivory CHB2IG-X Panduit Faceplate ½ Blank Insert, International Gray 5
6 Section 1.06 Fiber Optics 024E A1 Corning Indoor Fiber Optics (Riser) Single-mode 024E A3 Corning Indoor Fiber Optics ( Single-mode 024E8F A1 Corning Indoor/Outdoor Fiber (Riser) - Single-mode 024E8P A3 Corning Indoor/Outdoor Fiber ( - Single-mode 024T A1 Corning Indoor Fiber Optics (Riser) Multimode 024T A3 Corning Indoor Fiber Optics ( Multimode SP-X Corning Anaerobic Connector, SC, Multimode SP Corning Anaerobic Connector, SC, Single-mode CCH-01U Corning Closet Connector Housings - 1U CCH-02U Corning Closet Connector Housings - 2U CCH-03U Corning Closet Connector Housings - 3U CCH-04U Corning Closet Connector Housings - 4U CCH-CP12-59 Corning Connector Panel, SC Single-mode CCH-CP12-59-P03RH Corning Pigtailed Panel, SC Single-mode CCH-CP12-E7 Corning Connector Panel, SC Multimode CCH-CP12-E7-P03SH Corning Pigtailed Panel, SC Multimode CCH-UCC-KIT Corning Cable Clamp for Housing (Strain Relief for 3U & 4U) CPP-UCC-KIT Corning Cable Clamp for Housing (Strain Relief for 1U & 2U) HDWR-GRND-KIT Corning Hardware Grounding Kit for Armored Cables Section 1.07 Grounding Busbar Chatsworth 12 TGB Pattern Chatsworth 12 TMGB Pattern Chatsworth #6 AWG Two-Hole Compression Lug 6
7 Section 1.08 Labels PST-FO Panduit Self-Laminating Fiber Optic Cable Marker Tag PST-FOBLNK Panduit Self-Laminating Fiber Optic Cable Marker Tag Section 1.09 Modular Jacks CJ688TPBU Panduit TX6 Plus Jack Module, Blue CJ688TPEI Panduit TX6 Plus Jack Module, Electric Ivory CJ688TPVL Panduit TX6 Plus Jack Module, Violet CJ688TPOR Panduit TX6 Plus Jack Module, Orange Section 1.10 Patch Cables UTPSP3BU Panduit TX6 Plus Patch Cord - 3' Blue UTPSP3EI Panduit TX6 Plus Patch Cord - 3' Electric Ivory UTPSP3OR Panduit TX6 Plus Patch Cord - 3' Orange UTPSP3VL Panduit TX6 Plus Patch Cord - 3' Violet UTPSP5BU Panduit TX6 Plus Patch Cord - 5' Blue UTPSP5EI Panduit TX6 Plus Patch Cord - 5' Electric Ivory UTPSP5OR Panduit TX6 Plus Patch Cord - 5' Orange UTPSP5VL Panduit TX6 Plus Patch Cord - 5' Violet UTPSP7BU Panduit TX6 Plus Patch Cord - 7' Blue UTPSP7EI Panduit TX6 Plus Patch Cord - 7' Electric Ivory UTPSP7OR Panduit TX6 Plus Patch Cord - 7' Orange UTPSP7VL Panduit TX6 Plus Patch Cord - 7' Violet 7
8 Section 1.11 Patch Panels Ortronics Telephony Patch Panel - 24 ports CPPL24WBLY Panduit Modular Faceplate Patch Panels - 24 ports CPPL48WBLY Panduit Modular Faceplate Patch Panels - 48 ports Section 1.12 Standard Rack Chatsworth 3 Deep Standard Rack, 7 (2.1) x 19, 45U Section 1.13 Surface Mount Raceway LD10EI8-A LD10IG8-A LD5EI8-A LD5IG8-A Panduit Panduit Panduit Panduit 8 Low Voltage 1-piece Single Channel Raceway,.38 in 2, (Electric Ivory) 8 Low Voltage 1-piece Single Channel Raceway,.38 in 2, (International Gray) 8 Low Voltage 1-piece Single Channel Raceway, 1.00 in 2, (Electric Ivory) 8 Low Voltage 1-piece Single Channel Raceway, 1.00 in 2, (International Gray) DCF10EI-X Panduit Drop ceiling fitting for use with LD10 raceway (Electric Ivory) DCF10IG-X Panduit Drop ceiling fitting for use with LD10 raceway (International Gray) DCF5EI-X Panduit Drop ceiling fitting for use with LD5 raceway (Electric Ivory) DCF5IG-X Panduit Drop ceiling fitting for use with LD5 raceway (International Gray) JBX3510EI-A Panduit Low Voltage Surface Mount Outlet Boxes (Electric Ivory) JBX3510IG-A Panduit Low Voltage Surface Mount Outlet Boxes (International Gray) 8
9 Section 1.14 UTP Cabling 1872A A A A A D A A A Enhanced Category 6 Bonded-Pair Cable (Blue, Light, Non- Enhanced Category 6 Bonded-Pair Cable (White, Non- Enhanced Category 6 Bonded-Pair Cable (Orange, Non- Enhanced Category 6 Bonded-Pair Cable (Violet, Non- Enhanced Category 6 Bonded-Pair Cable (Blue, Enhanced Category 6 Bonded-Pair Cable (White, Enhanced Category 6 Bonded-Pair Cable (Orange, Enhanced Category 6 Bonded-Pair Cable (Violet, 9
DIVISION 27 COMMUNICATIONS. A. System design shall be completed by a Registered Communications Distribution Designer (RCDD).
DIVISION 27 COMMUNICATIONS 27 00 00 COMMUNICATIONS A. System design shall be completed by a Registered Communications Distribution Designer (RCDD). B. Comply with American National Standards Institute
1. Furnish and install faceplate and modular jacks at each single gang outlet as described below:
Washington University in St. Louis Building: Communication Specification: Research Voice/Network/Typical 1. Furnish and install faceplate and modular jacks at each single gang outlet as described below:
SECTION 25110 TELECOMMUNICATION ROOMS
PART 1 - GENERAL 1.1 SUMMARY A. SCOPE SECTION 25110 TELECOMMUNICATION ROOMS 1. This section includes the minimum installation requirements for equipment and cabling infrastructure in Telecommunication
Cabling Services (price per pull) Zone 1 Zone 2 Zone 3 Zone 4 Zone 5
BryComm, LLC -SDD-1901 Cabling Services (per pull) - Labor Only STANDARD TIME The price per cable pull represents all labor to include fishing walls, running cable through modular furniture, terminating,
1.1 SYSTEM DESCRIPTION.1 Data system includes data outlets and wiring for office and school applications.
Issued 2005/06/01 Section 16743 Data System Page 1 of 7 PART 1 GENERAL 1.1 SYSTEM DESCRIPTION.1 Data system includes data outlets and wiring for office and school applications..2 Data system equipment
E Series. E Series. Category 6 and 5e. Features
E Series Category 6 and 5e CommScope, world leader in copper and fiber connectivity, offers the E Series product line as the ideal solution to all your infrastructure needs for safe and reliable data transmission.
Category 6 Solutions. 4. Category 6 Solutions. 09/08 400836IN TrueNet Structured Cabling. Introduction... 4.2. Cable... 4.3. Patch Panels... 4.
Category 6 Solutions Introduction... 4.2 Cable... 4.3 Patch Panels... 4.4 Modules... 4.6 Patch Cords... 4.12 Outlets... 4.16 Faceplates...4.18 4. 1 Search Category 6 Solutions Introduction ADC KRONE s
TCTC Cabling Specifications
TCTC Cabling Specifications Purpose: To provide a standard specification that will be used for all Tri County Technical College (TCTC) facilities requiring structured cabling installation. Product specifications,
ATTACHMENT F 050R6800016 - CABLE AND WIRING SERVICES FUNCTIONAL AREA I PRICE PROPOSAL FORM Amendment 6
050R6800016 CABLE AND WIRING SERVICES (Column A) (Column B) (Column C) (Column D) (Column E) (Column F) (Column G) (B+C+D+E)*F= G Item Description PER 100' RUN PER 150' RUN PER 200' RUN PER 300' RUN QUANTITY
UT Southwestern Medical Center Information Resources Cable Installation Standard
UT Southwestern Medical Center Information Resources Cable Installation Standard PART 1- GENERAL 1.01 SUMMARY A. Furnish and install wire, cable, devices, equipment, and accessories for a complete system
Pretium Connector Housings
Pretium Connector Housings A LANscape Pretium Solutions Product Applications Main cross connect, intermediate cross connects and telecommunications rooms Rack or equipment cabinet installations Data center
Structured Wiring Specifications ERAU Daytona Beach Campus (Dec 14 2011)
Structured Wiring Specifications ERAU Daytona Beach Campus (Dec 14 2011) A. Objectives The Information Technology (IT) Department of Embry-Riddle Aeronautical University (ERAU) seeks to establish a standards-based
Section 27 05 26 Grounding and Bonding for Communications
Part 1 General 1.1 General 1.1.1 Summary A. This section governs the products and execution requirements relating to furnishing and installing grounding and bonding for the communication systems. B. Description
The Evolution of Copper Cabling Systems from Cat5 to Cat5e to Cat6 Copper Cabling Standards and Technical Aspects
The Evolution of Copper Cabling Systems from Cat5 to Cat5e to Cat6 Copper Cabling Standards and Technical Aspects White Paper /7/0 Executive Summary Now that the TIA/EIA-568-B.- Category 6 Copper Cabling
NORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS
SECTION GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS RELATED SECTIONS: Section 27 00 00 General Requirements Section 27 02 00 Communication General Requirements Section 27 05 28 Pathways for Communications
Fiber Plant Design Considerations for Active DAS Mike Brownson VP DAS Technical Solutions Hutton Communications
Fiber Plant Design Considerations for Active DAS Mike Brownson VP DAS Technical Solutions Hutton Communications Topics! Understanding Fiber Types! Powering your Remotes via Composite Fiber! Fiber Design
CHARTER TOWNSHIP OF SHELBY REQUEST FOR PROPOSAL. Fiber Optic and Data Cabling Project Shelby Township Police Building
CHARTER TOWNSHIP OF SHELBY REQUEST FOR PROPOSAL The Charter Township of Shelby is soliciting proposals to install fiber optic and data cabling to serve a new Police Building that is under construction
B. PART 1 - GENERAL of SECTION 271300 BACKBONE COMMUNICATIONS CABLING shall also apply to this section.
SECTION 271500 - HORIZONTAL UTP CABLING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
DIVISION 26 - ELECTRICAL SECTION 26 05 20 CABLES FOR INSTRUMENTATION
DIVISION 26 - ELECTRICAL PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Instrumentation Cables 1.02 SUBMITTALS A. Submit in accordance with requirements of Section 01 33 00. B. Product Data: Submit
SECTION 16750. TELECOMMUNICATIONS SYSTEM (Cat 6)
SECTION 16750 TELECOMMUNICATIONS SYSTEM (Cat 6) PART 1 - GENERAL 1.01 REQUIREMENTS A. The general provisions of the Contract, including General and Supplementary Conditions and General Requirements, apply
FTE Cabling Best Practices Author: Todd Bill, RCDD/NTS
FTE Cabling Best Practices Author: Todd Bill, RCDD/NTS Document ID: WP-07-01-ENG Original Issue Date: May 2007 Version: 1.0 FTE Cabling Best Practices 1 Table of Contents Introduction and Applicable Standards...3
Security & Surveillance Cabling Systems
Security & Surveillance Cabling Systems Security and Surveillance Cabling Systems The video security industry is growing and ever-changing, offering a wealth of opportunity for today s security professionals.
Cabling Services (price per pull)
Cabling Services (per pull) - Labor Only Price Sheet - Standard Hours 14, Cat 5 cable - installed, terminated, tested and labeled including wall plate, jack and certification report. 0-0 Feet $ 77.00 $
University of Nevada, Reno Campus Design & Construction Standards
DIVISION 27: COMMUNICATION See Appendix K: Additional Communication / IT Requirements A) Communications IT Building Requirements B) Telecommunications Spaces Minimum Requirements C) Common Work Results
FCS-FCT-FCP Housings and Connector Panels. InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2
Product Family: Product: Fibre: LANscape Hardware Solutions FCS-FCT-FCP Housings and Connector Panels InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2 Applications Corning Cable
ANSI/TIA/EIA-606. Administration Standard for the Telecommunications Infrastructure of Commercial Buildings
ANSI/TIA/EIA-606 Administration Standard for the Telecommunications Infrastructure of Commercial Buildings Distributed by NDS INFORMATION- TELECOM SYSTEM --------------------------------------------- Head
DEPARTMENTAL REGULATION
U.S. DEPARTMENT OF AGRICULTURE WASHINGTON, D.C. 20250 DEPARTMENTAL REGULATION SUBJECT: Service Center Technology Modernization Project (SCTMP) Wiring/Cabling Specifications for Service Center Agencies
Structured Cabling Statement of Work
Structured Cabling Statement of Work Multiple Locations June 15, 2010 Page 1 A. GENERAL a. San Joaquin County (referred to as Owner ) is requesting proposals for a new structured cabling infrastructure
Minimum Standards for Data/Voice Infrastructure in New Building Construction
UNIVERSITY OF WATERLOO Minimum Standards for Data/Voice Infrastructure in New Building Construction 12/17/2012 Offices 1. Two Work Area Outlets (WAO) on opposite walls, each with 2 jacks 2. Each WAO shall
Presenters Brett Weiss, Gabe Martinez, Brian Kroeger.
1 Presenters Brett Weiss, Gabe Martinez, Brian Kroeger. Topics to be covered: Cable identification Purpose of the various cable types Installation techniques Building Infrastructure Overview of networking
AMPTRAC TM CONNECTIVITY MANAGEMENT SYSTEM
AMP NETCONNECT TM AMPTRAC TM CONNECTIVITY MANAGEMENT SYSTEM The AMPTRAC Connectivity Management System turns cabling systems and their connected devices into intelligent networks by reducing costly and
University of North Carolina at Charlotte Design and Construction Manual Section 3, Annex K, 49er Card Systems ANNEX K 49ER CARD SYSTEMS
ANNEX K 49ER CARD SYSTEMS UNC CHARLOTTE 49ER CARD SYSTEM INSTALLATION AND CONTRACTOR REQUIREMENT SCOPE OF WORK: The following information pertains to the installation and contractor requirements to install
Cable Installation Project
Cable Installation Project 1. Intent. It is the intent of the U.S. Court of Appeals to install Category 6 (CAT6) data cabling in the Robert F. Peckham Federal Building and United States Courthouse, 280
LEHIGH UNIVERSITY LIBRARY AND TECHNOLOGY SERVICES Communications Infrastructure Standards 6/22/15 1. OVERVIEW
1. OVERVIEW 1.1. The purpose of this document is to define the work standards for Lehigh University Telecommunications Room (TR) construction and cable installation, and to identify all products and their
STATE OF UTAH "BEST VALUE" COOPERATIVE CONTRACT CONTRACT NUMBER: AR364 January 26, 2015
Revision number: Purchasing Agent: Jeff Mottishaw Phone: (801) 538-1287 Email: jmottishaw@utah.gov Item: TELECOMMUNICATIONS CABLE INSTALLATION MATERIAL AND PRODUCTS Vendor: 00193C ANIXTER INC 3775 WEST
270526-TC Grounding and Bonding for Telecommunications Systems
270526-TC Grounding and Bonding for Telecommunications Systems Part 1 - General Related Documents The following related sections of the OT standards shall also be applicable to this section. OT Engineer
This presentation to be used in conjunction with:
1 This presentation to be used in conjunction with: Spec Sheets: SA-GRSP10, SA-GRSP09, SA-GRSP11 Samples in DC-GROUND-KIT 8/16/2012 2 Network Bonding and Grounding: TIA-607-B Generic Telecommunications
TELECOMMUNICATIONS STRUCTURED CABLING GUIDELINES AND SPECIFICATIONS. University of Chicago IT Services Infrastructure Services October 2011
TELECOMMUNICATIONS STRUCTURED CABLING GUIDELINES AND SPECIFICATIONS IT Services Infrastructure Services October 2011 Table of Contents 1 Introduction... 4 1.1 Planning and Design... 4 1.2.1 Roles and Responsibilities...
Technical Writing - A Glossary of Telephone Utilities and UtilitiesTechnical Specifications
LSUHSC Computer Services 433 Bolivar Street New Orleans, LA 70112 Phone 504-568-6130 LSUHSC Enterprise Networking Cabling Infrastructure: Design & Installation Standards Last Revised: July 16, 2012 Contents
E-Rate Data Cabling RFP. Addendum 2 ISSUED BY: Alvord Unified School District Information Technology Department
ALVORD UNIFIED SCHOOL DISTRICT E-Rate Data Cabling RFP Addendum 2 ISSUED BY: Alvord Unified School District Information Technology Department The following are Addendums to the original RFP titled DataCablingRFP.pdf.
ONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
INTELLIGENT INFRASTRUCTURE MANAGEMENT
F/ System F/ Assemblies, 9.0 W W W. S I E M O N. C O M SECTION CONTENTS System...............................9. IM Software........................... 9. Analyzers..............................9. System
Generic Category 5e Cabling Specification
Telecommunications Cabling System Technical Specification Category 5e Tyco Electronics Corporation provides this information as a courtesy to its customers and potential customers. Customer should review
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories 2015 PRODUCT CATALOG 2ND EDITION LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories A technically and commercially
Le Sueur County, MN Tuesday, June 2, 2015 Board Meeting
Le Sueur County, MN Tuesday, June, 0 oard Meeting Item 7 0:00 am Scott Gerr, MIS (0 min) RE: Courthouse infrastructure upgrade Staff Contact: Le Sueur County oard Meeting - //0 Page / 7 County Courthouse
HOUSTON COMMUNITY COLLEGE HCC ALIEF CAMPUS MAIN BUILDING, FIRST, SECOND & FOURTH FLOORS RENOVATION ISSUE DATE: 10.17.12
SECTION 27 05 26 - GROUNDING AND BONDING FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes grounding and bonding products, design requirements and installation for communications
Data Center. Pre-terminated. Patch Panel System. Cabling Systems Simplified. Patch Panels. 10G + Gigabit. Patch Cords. Plug & Play Installation
Data Center Pre-terminated Patch Panel System Patch Panels Plug & Play Installation 10G + Gigabit Patch Cords Bundled + Labeled Cabling Systems Simplified Our Mission At Cablesys, our mission is to simplify
Cable Assemblies. Corning Cable Systems
Corning Cable Systems OptiFit Node Assembly Photo CAPSS1721 Description As the industry s leading supplier of single-mode cable assemblies, Corning Cable Systems offers the most complete line of connectors
Table of Contents. Fiber Trunking 2. Copper Trunking 5. H-Series Enclosures 6. H-Series Mods/Adapter Panels 7. RSD Enclosures 8
Data Center Guide 1 Our Philosophy As a leader in the enterprise cable industry since our inception over three decades ago, we can help you implement the solution that will work best for your cabling infrastructure,
Beaver Dam Unified School District Request for Proposal Video Surveillance and Door Access Control Systems
Beaver Dam Unified School District Request for Proposal Video Surveillance and Door Access Control Systems The Beaver Dam Unified School District (BDUSD) is requesting proposals from qualified companies
DESIGN GUIDELINES. Local Area Network
DESIGN GUIDELINES Local Area Network The total oversight and management responsibilities for information assurance (IA) and protection of DoDEA s critical infrastructure fall under the purview of the DoDEA
March 2007. 27 08 00 Commissioning of Communications. See Appendix E3. 27 08 00-1
March 2007 27 08 00 Commissioning of Communications See Appendix E3. 27 08 00-1 27 11 00 Communications Equipment Room Fittings 1.0 General TELEPHONE RISERS: A. All copper telephone riser cables must be
All work must conform to the National Electric Code, latest edition, and all other applicable codes and regulations.
DIVISION 16 ELECTRICAL SECTION 16100 - ELECTRICAL PART 1 - GENERAL SCOPE All electrical work as shown on the drawings and as necessary to provide a complete electrical system. Include primary service,
Keyed LC Connector Solution
features and benefits Eight color-coded mechanical key positions Meets TIA/EIA-568-B requirements Keyed connectors and adapters Full solution availability Keyed LC Connectors Photo LAN758 SPECIFICATION
Vertical Phone System Upgrades 2014. Scope of Work
Vertical Phone System Upgrades 2014 Scope of Work Project Overview Install new Vertical phone system and phones on site. Complete testing with API helpdesk. Remove old phone system, phones and box up for
R&Mfreenet Advanced Cat 6 A Unshielded Connection Module
R&Mfreenet Advanced R&Mfreenet Advanced Cat 6 A Connection Module The R&Mfreenet Cat 6 A unshielded connection modules, part of the Advanced cabling system, are ideal for voice, fast data transmissions
Innovative Connectivity Solution for Maximum Performance and Security
Innovative Connectivity Solution for Maximum Performance and Security Financial Institutions Supports high performance backbone which enables transfer of real-time financial information through voice,
Telecommunications Systems Narrative Page 1 The Engineering Enterprise
I. TELECOMMUNICATIONS GENERAL REQUIREMENTS A. The project consists of a renovation to the historic Clinical Sciences building, originally built in 1933. The existing building has a total area of 105,000
Network Infrastructure Security Solution
Network Infrastructure Security Solution Network Infrastructure Security Solution Technology has rapidly become a critical asset for driving improvements in operational and financial efficiencies. With
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
UTSC CABLE SYSTEMS SPECIFICATION SITE DESIGN CRITERIA DESIGN REQUIREMENTS INSTALLATION PRODUCTS
UTSC CABLE SYSTEMS SPECIFICATION SITE DESIGN CRITERIA DESIGN REQUIREMENTS INSTALLATION PRODUCTS University of Toronto Scarborough Cable Systems Specification 1/23 Network Administrators Glenn Attwood Manager,
SECTION 27 13 24 COMMUNICATIONS OPTICAL FIBER OSP CABLING
SECTION 27 13 24 COMMUNICATIONS OPTICAL FIBER OSP CABLING PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete
SECTION 27 20 00 - DATA COMMUNICATIONS. A. Complete vertical and horizontal Communication/Data Network System as indicated.
SECTION 27 20 00 - PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this
2178-S Fiber Optic Splice Case
2178-S Fiber Optic Splice Case Instructions March 1998 34-7041-6288-1-B 1 2 Table of Contents 3M 2178-S Splice Case Description... 4 1.0 General...4 2.0 Specifications...4 3.0 Kit Contents...5 3M 2178-S
Alpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
Reliable, Consistent, Quality
Reliable, Consistent, Quality 1-877-320-3143 www.fibertronics.com Reliable, Consistent, Quality Welcome To Fibertronics Inc. Reliability, consistency, and quality is what we put behind every Fiber optic
CDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
STRUCTURED CABLE SPECIFICATION INFORMATION SYSTEMS AND SERVICES ISSUE 1 NOVEMBER 2011
STRUCTURED CABLE SPECIFICATION INFORMATION SYSTEMS AND SERVICES ISSUE 1 NOVEMBER 2011 Project Ref. Project Name Project Manager Date issued... Consultant/Contractor... 1 CONTENTS 1000 GENERAL OVERVIEW
ORIGINAL CABLE PLATES
Since 1998, DataComm Electronics has been pioneering innovative solutions for structured wiring. Industry-wide, we are known as the manufacturer who listens to customers, delivering the reliable and affordable
BIX Cross-Connect System Distribution Connectors, Multiplying Connectors and Modular Jack Connectors
C O M M E R C I A L N E T W O R K I N G C O P P E R 15.13 Distribution Connectors, Multiplying Connectors and Modular Jack Connectors A0393146 QCBIX1A4 Connector BIX Distribution Connector The BIX Distribution
Document Purpose: Document Scope:
Document Purpose: Washington University School of Medicine, BJC and Telecommunications Facility Corporation Low Voltage Voice and Data Pathways and Spaces Standard February 13, 2015 The purpose of this
LANC Fibre Patch Panel Solution
features and benefits Modular front with interchangeable fibre optic adapter modules Quick mount feature (teardrop design) Port numbers printed above and below adapter modules High-density using LC connectivity
Network Infrastructure Security Solution
Network Infrastructure Security Solution Network Infrastructure Security Solution Technology has rapidly become a critical asset for driving improvements in operational and financial efficiencies. With
Uniprise Solutions. Information Security Network Solutions
Uniprise Solutions Information Security Network Solutions Information Security Network Solutions Companies today face the challenges of maintaining data security throughout the enterprise. Network managers
Enterprise Networks. Core Products FOR. Local Area Networks. Data Centers AND
Enterprise Networks FOR Local Area Networks AND Data Centers Customer Care Bill-of-Materials Tool Training Services A Solution in itself Creating solutions, products and resources that fit together, are
ANSI/TIA/EIA - 568-A, Commercial Building Telecommunications Cabling Standard.
WIRING STANDARD INTRODUCTION This standard defines a telecommunications wiring system for North Dakota State Agencies, offices or buildings that will support a multi-product environment. The purpose of
OFFICE OF INFORMATION TECHNOLOGY/ NETWORKING AND TELECOMMUNICATIONS SERVICES (OIT/NTS) EQUIPMENT, INFRASTRUCTURE, AND WIRING STANDARDS
OFFICE OF INFORMATION TECHNOLOGY/ NETWORKING AND TELECOMMUNICATIONS SERVICES (OIT/NTS) EQUIPMENT, INFRASTRUCTURE, AND WIRING STANDARDS 1 INTRODUCTION... 2 2 GENERAL STANDARDS... 3 3 SPECIAL REQUIREMENTS...
Nathan Dayton ADNET. ADNET SYSTEMS, Inc. nathan@muspin.gsfc.nasa.gov. Slide Number 1
Nathan Dayton SYSTEMS, Inc. nathan@muspin.gsfc.nasa.gov Slide Number 1 NETWORK DESIGN Slide Number 2 Previously there have been two phases in the design of a network Department Design Interconnect Design
University of Nevada, Reno Campus Design & Construction Standards
DIVISION 27: COMMUNICATION 27000 - General Network Standards and Policies The intent of the network policies are: To ensure that computer networking is treated as an essential component of all new and
hot products guide people. passion. expertise. gocsc.com
hot products guide gocsc.com Hardware & Adapter Panels who is CSC? Founded in 1972, Communications Supply Corporation (CSC), a subsidiary of WESCO International, Inc. (NYSE: WCC) distributes a full range
SYSTIMAX SCS PowerSum and GigaSPEED XL Cabling Installation Guidelines
SYSTIMAX SCS PowerSum and GigaSPEED XL Cabling Installation Guidelines This document contains critical information regarding the installation of a certified SYSTIMAX SCS that meets or exceeds performance
Building Design Guidelines
Building Design Guidelines Campus Technology Infrastructure Version: February 2010 Contents INTRODUCTION... 4 Documentation Requirements References and Documents for Telecommunications Standards and Guidelines
BID TABULATION Fiber Optic Cable Materials Bid #0111-147 March 16, 2011 at 11:00 am CDT
1 251,200 LF 2 HDPE-SDR 13.5 with pull tape Unit Price $0.5679 $0.527 $0.593 $0.630 Extended Price $142,656.48 $0.00 $132,382.40 $148,961.60 $158,256.00 2 251,200 LF 2 HDPE-SDR 13.5 without pull tape Unit
Fiber Optics in Harsh Environment Applications
Fiber Optics in Harsh Environment Applications Table of Contents Industrial Testing Comparisons 2 Fiber Optics in Harsh Environment Applications 3 Oil & Gas Products 4 Mining Products 6 Manufacturing 8
a. Design or design review of Voice, Data, and Wireless systems b. Copper cable manufacturer selection for new buildings and large scale renovations.
5.18 Voice and Data Distribution 5.18.1 General Introduction 1. This standards document is to be used for any projects on the University of Calgary campus that involves the voice and data distribution
Technical Specifications v5.6.14
Summer 14 Columbia University Information Technology [Author Name] Technical v5.6.14 [Type the abstract of the document here. The abstract is typically a short summary of the contents of the document.]
FITNESS FACILITY WIRING SPECIFICATIONS. NETPULSE Inc. 2331 3rd Street San Francisco, CA 94107 Phone: 415.643.0223
FITNESS FACILITY WIRING SPECIFICATIONS NETPULSE Inc. 2331 3rd Street San Francisco, CA 94107 Phone: 415.643.0223 CONTENTS: - Scope of work Summary - Equipment list - Technical specifications - Map of data
Coordinate size and location of telecommunications rooms with the architect to be in compliance with this document and NEC Article 800.
Section 16700- TELECOMMUNICATIONS Part 1 - General The scope of this project includes providing all material and labor to install a complete telecommunication system. The systems shall include riser cables,
Patch Cords for Data Center Applications
Applications General use of patch cords includes the interconnection of the optical fiber cable plant with opto-electronic equipment, and/or the cross-connection between cable plant segments. Pigtails
PANDUIT is a Technology Developer Partner for Storage Networking Hardware. FIBER OPTIC CABLING SYSTEM SOLUTIONS B EYOND T HE G LASS
PANDUIT is a Technology Developer Partner for Storage Networking Hardware. FIBER OPTIC CABLING SYSTEM SOLUTIONS B EYOND T HE G LASS Bandwidth Requirements Push Fiber Optic Solutions Offices, Operations
7.4 3M No Polish Connector
Cap Fibre Splice Element Description 3M No Polish Connector (NPC) enables fast, on-site installation of 250μm and 900μm connections utilizing a one piece, pre-assembled design. The SC compatible connector
CABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
Discontinued. Volition. Fiber Optic Cable. 3Innovation
Volition Fiber Optic Cable Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125
Standards. www.nordx.com 5 ANSI/TIA/EIA-569-A (CSA T530)
The primary focus of this standard is to provide design specifications and guidance for all building facilities relating to telecommunications cabling systems and components. This standard identifies and
Division 27 Master Specification for
Division 27 Master Specification for Information Transport Systems and Spaces May 1, 2014 1 Table of Contents 1 Section 27 10 01 Structured Cabling General Requirements 1.1 Scope 1.2 Approved Contractor
Cable Assembly Solutions at the Speed of Light
Cable Assembly Solutions at the Speed of Light Peggy Kovling ACI Founder Peggy Kovling credits her extensive knowledge of the cable business, along with her abilities in customer relationship management,
SECURE Fiber Optic Products
SECURE Fiber Optic Products LC SECURE Fiber Optic Products (Pages 9 and 10) LC SECURE Connectors, Cable Assemblies and Adapters MPO SECURE Fiber Optic Products (Pages 11 and 12) MPO SECURE Cable Assemblies
Interceptor Optical Network Security System. Design Guide. Chapter 4: INTERCEPTOR Optical Network Security System Alarmed Carrier PDS
Interceptor Optical Network Security System } Chapter 4: INTERCEPTOR Optical Network Security System Alarmed Carrier PDS Copyright 2010 Network Integrity Systems, Inc. All rights reserved. The information
Copper Patch Cords. Impact On Network Performance and Reliability
Copper Patch Cords Impact On Network Performance and Reliability 1 The Impact of Copper Patch Cords on Network Performance and Reliability As network infrastructures continue to have a higher impact on