Hitech Electrical Automation Pty Ltd. Company Profile & Capability Statement

Transcription

1 ABN Railway Court Glanmire Q 4570 Ph: Fax: [email protected] Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement Hitech Electrical Automation Pty Ltd 1

2 TABLE OF CONTENTS 1.0 INTRODUCTION 2.0 THE COMPANY 3.0 ELECTRICAL PROJECT DESIGN AND MANAGEMENT 3.1 Define Requirements 3.2 Initial Design & Planning 3.3 Design & Documentation for Tender Packages 3.4 Post Tender Analysis 3.5 Programming 4.0 KEY PERSONNEL 5.0 KEY CLIENT BASE 6.0 RELEVANT PROJECTS Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 2

3 1.0 INTRODUCTION Hitech Electrical Automation is an electrical engineering and contracting company with a wealth of experience in the following industries: - Extractive industries including surface mines and quarries Concrete batch plants Asphalt and bitumen plants Sand screening plants Timber milling and processing plants Brick and masonry plants Food processing Agriculture and Horticulture Furniture manufacturing plants Industrial and commercial lighting Services offered include: - Electrical Engineering Process Control Engineering Conceptual Design and Planning Project Management Project Supervision Advice on Acts, Regulations and Standards Advice on energy efficiencies Electrical audits of plant and machinery Arc Flash audits, analysis and reports Earthing system design, installation and testing Computer Aided Drafting of electrical drawings and schematics Hazard analysis for safety and control systems Supply and installation of prefabricated electrical switchrooms Supply and installation of Power Distribution switchboards Supply and installation of Motor Control Centre s Supply and installation of control systems including PLC, SCADA and associated communications networks Supply and installation of sensing and measuring equipment Plant maintenance WEG business partners and integrators offering full range of services including sales, installation, commissioning and maintenance of electric motors, drives and starters Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 3

4 2.0 THE COMPANY Hitech Electrical Automation was established in January We are an electrical engineering and contracting company involved in the total electrical design, installation, testing, commissioning and maintenance of industrial and commercial electrical and control installations. We are members of the Electrical Contractors Association QLD, an accredited member of the Master Electricians Australia and a member of the ECS s SafetyConnect program which is an audited Health, Safety, Environment and Quality management program. Company contact details: Hitech Electrical Automation Pty Ltd Queensland Electrical Contractors Licence: ABN: Railway Court Glanmire, Qld 4570 Managing Director: Phillip Hall Tel: Fax: Mobile: [email protected] Projects and Estimating (Director): Daniel Hall Tel: Fax: Mobile: [email protected] Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 4

5 3.0 ELECTRICAL PROJECT DESIGN & MANAGEMENT The following tasks and responsibilities are considered in project design and management 3.1 Define Requirements Define the responsibilities for the project members Determine the materials, equipment and labour skills required Evaluate the existing engineering data and other available information that can be utilised for the project Complete all investigation works relating to the site Evaluate the clients expectations regarding operational management and economic considerations of the project 3.2 Initial Design and Planning Initial design and planning concepts are developed to establish the broad parameters for the project including: Management structure and lines of authority and communication Determine scope of specifications of the works Preliminary engineering sketch plans Flow diagrams and process schedules regarding plant layout, selection of plant and general functionality Evaluation of alternative designs Review of all requirements of statutory authorities having jurisdiction over the project An overall project time line indicating the major milestones Document the proposed method and architecture of the plant operational control and maintenance Evaluate the cost effectiveness of the proposal Review all of the above with the project team in conjunction with the clients representative 3.3 Design and Documentation The approved and signed off concept is developed into a working design and documentation in accordance with the expected performance standards. Our Electrical Engineering Manager will co-ordinate and manage this process which includes: Surveys Construction systems Specifications Engineering design and documentation Material usage Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 5

6 Operational and safety standards Working drawings and schedules for manufacture, installation, testing, commissioning and maintenance provisions Determination that the electrical design achieves maximum value for money within the client s agreed parameters 3.4 Post Tender Analysis The Electrical Engineering Manager in conjunction with the project team would: Review tenders, collate and prepare capital cost proposal Prepare electrical operating cost proposal Prepare execution program for engineering, procurement, construction and commissioning Supply documentation and discuss with client 3.5 Programming The Project Manager would establish, in conjunction with the rest of the project team, a detailed time schedule of all activities required for the design and construction showing all key dates with regular updates and reports throughout the project. 4.0 KEY PERSONNEL Phillip Hall Managing Director and Technical Advisor Daniel Hall Projects and Estimating (Director) Manuel Martins Electrical Engineering Manager Ken Sugden Project Manager The above personnel have had extensive experience in the disciplines listed above. Individual CV s can be provided if required. Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 6

7 5.0 KEY CLIENT BASE We are Suppliers of our services to the following companies. All insurances are in place to meet the requirements of providing services to these companies. Boral Construction Materials (Quarries and Concrete Batch plants) Hanson Heidelberg Cement Group (Quarries) MCG Group (Quarries) Hy-Tec Industries (Quarries) Tropic Asphalts (Asphalt & Bitumen) Scope Engineering Services (we collaborate to provide Turn-Key quarrying and screening equipment and plant) Superior Wood (timber milling and processing) GB Masonry (concrete block manufacturing) SunWater (bulk water infrastructure) 6.0 RECENT RELEVANT PROJECTS Benninghoven- Fulton Hogan Townsville Asphalt Plant Townsville QLD Hitech contracted directly to Benninghoven Germany to carry out the electrical installation of the new Asphalt plant on a greenfield site. Hitech carried out the entire installation, testing, verifying Australian Standards and assisted in commissioning. Hitech contracted directly to Benninghoven Germany to carry out the electrical installation of the new Asphalt plant on a greenfield site. This job was carried out quicker than the allocated time frame and within Budget. Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 7

8 Tropic Asphalts- Australia wide. Asphalt Plant Hitech has been carrying out installation services for Tropic Asphalt for over 5 years. Installation services include the following: Installation of new Benninghoven plant at Caloundra QLD Installation and relocation of Benninghoven mobile plants throughout Australia to more than 5 locations Installation of Benninghoven equipment as a project upgrade to the Newcastle fixed plant installation Relocation of Astec mobile Asphalt plant throughout NSW Boral Construction Materials Moy Pocket and Wondai Quarries QLD The design, installation, testing, commissioning and maintenance of the complete electrical installation for the crushing and screening plants at the Moy Pocket and Wondai quarries. We are the nominated Persons in Control of Electrical Works (registered with the Department of Mines Qld) for these two quarries and provide a regulated maintenance service and carry out the electrical project works for these sites. Hitech has been involved with these sites for 13 years. Cedars Quarry Mackay QLD Design, installation, testing and commissioning of lighting and power in relation to the Noise Mediation Project Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 8

9 Hanson Heidelberg Cement Group Farleigh Quarry Mackay QLD The design, engineering, installation, testing, commissioning of a new 3200A Main Distribution Centre/Motor Control Centre complete with Power Factor Correction equipment Supply and installation of Earth Leakage protection equipment Supply and installation of Pre-Fabricated switchroom complete with fire suppression equipment Carry out alterations and additions to the existing electrical installation Supply and installation of the electrical works associated with the upgrade to the plant equipment and machinery. Yalkara Quarry Via Biloela QLD The design, engineering, installation, testing, commissioning of a new 2500A Main Distribution Centre/Motor Control Centre complete with Power Factor Correction equipment Supply and installation of Earth Leakage protection equipment Supply and installation of Pre-Fabricated switchroom. Installation of Power Generators and associated earth grid system Installation of all electrical equipment and wiring and the associated control and safety systems for the crushing plant East Guyong Quarry Via Orange NSW The design, engineering, installation, testing, commissioning of a new 2500A Main Distribution Centre/Motor Control Centre complete with Power Factor Correction equipment and remote operation of all circuit protection devices rated at or above 800A Design, engineering, installation and testing of L.V. & H.V. earth grid Supply and installation of Earth Leakage protection equipment Supply of Pre-Fabricated switchroom complete with fire suppression equipment Supply and installation of the site power reticulation including terminations to the 11000/415 volt power transformer Supply and installation of all electrical equipment and wiring and the associated control and safety systems for the crushing plant Farleigh, Ferny Grove, Glass House Mountains, Ravensbourne and Wolfdene Quarries located throughout Queensland Carry out Arc Flash Analysis and engineering studies of all switchboards on site and provide report, labels and recommendations on the results Adjustment of protection device settings Please refer to the sample PDF document - Nerang_Plant 1_Final Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 9

10 Hobart Tasmania The design, installation, testing, commissioning of 1200A Main Distribution Centre/Motor Control Centre complete with Power Factor Correction equipment and remote operation of all circuit protection devices rated at or above 800A Supply and installation of Earth Leakage protection equipment Supply of Pre-Fabricated Switchrooms complete with fire suppression equipment Installation of earth grid system Installation of all electrical equipment and wiring and the associated control and safety systems for the crushing plant Research and Development We are currently working with NHP, Eaton and WEG to develop switchboards for applications that require: Arc Fault containment and Arc Flash analysis Remote switching of circuit protection devices rated at or above 800A Internal thermal monitoring and protection After our most recent project at Hanson s East Guyong quarry, Hitech has been invited to share its knowledge on How to eliminate flash hazards in a main switchboard. An invitation was received from Mr. Bernard Gittons (NSW Mines Inspectorate) to do a presentation on this topic at the 24 th Electrical Engineering Safety Seminar being hosted by the NSW Department of Resources and Energy. Hitech Electrical Automation Pty Ltd Company Profile & Capability Statement 10