Nortel Communication Server 1000 Rls.6.0 Upgrades for Engineers

Transcription

1 1 Nortel Communication Server 1000 Rls.6.0 Upgrades for Engineers Question: 1 A customer is upgrading an existing Communication Server (CS) 1000M with a CPPM Signaling Server at Rls. 5.0 to a CS 1000M Rls What minimum modification must be made to the Signaling Server? A. upgrade the Signaling Server software to Rls. 6.0 B. upgrade the Signaling Server memory to 2 GB C. upgrade the memory to 2 GB and the Signaling Server software to Rls. 6.0 D. replace the CPPM Signaling Server with a new COTS Signaling Server Question: 2 A customer recently upgraded to a Communication Server (CS) 1000E 6.0 HA with two CPPM Call Server, seven CPPM Signaling Servers, five Geographically Redundant Survivable Media Gateways, and 6000 IP telephones. You decide to test the Triple Registration feature to ensure the system redundancy feature works. Which registration flow for the Media Gateway Controller describes the Triple Redundancy feature among the CS 1000 Rls. 6.0 hardware components? A. Signaling Server> Primary Call Server> Alternate Call Server 1> Alternate Call Server 2. B. Alternate Call Server 2> Alternate Call Server 1> Primary Call Server. C. Primary Call Server> Alternate Call Server 1> Alternate Call Server 2 D. Voice Gateway Media Card> Leader Signaling Server> Follower Signaling Server 1> Follower Signaling Server 2 Question: 3 A customer is upgrading a Communication Server (CS) 1000E Rls. 5.5 system to a Communication Server (CS) 1000E Rls. 6.0 system in a geographically-distributed Survivable Media Gateway (SMG) environment. They want to provide backup Terminal Proxy Server (TPS) services for users at the SMG site in case of a WAN failure. Which component provides backup TPS services? A. DSP Daughterboard B. Local SMG Leader Signaling Server C. Media Card 32-port (MC32) D. Media Card 32-port S (MC32S) Answer(s): B Question: 4

2 2 You are designing a Survivable Media Gateway geographic redundant solution including a Communication Server 1000E HA Rls. 6.0 system with CPPM Call Servers. The customer requires the use of the maximum number of supported media gateways. How many survivable media gateways can participate in automated database duplication? A. 28 B. 30 C. 48 D. 49 Question: 5 A customer is migrating a Media Gateway (MG) 1000B Rls. 4.5 to a Communication Server (CS) 1000E Rls. 6.0 Co-resident system. The current MG 1000B contains one Media Card. Which card(s) will Enterprise Configurator (EC) provision to replace the SSC card? A. CPPM Co-resident card and a MGC card B. CPPM Co-resident card and a MGC card with 32-port daughterboard C. CPPM Co-resident card and a MGC card with 96-port daughterboard D. CPPM Co-resident card, a MGC card with 96-port daughterboard, and a 32-port daughterboard Question: 6 A customer is upgrading an existing Media Gateway (MG) 1000B Rls. 4.5 to an MG 1000B Rls. 6.0 and requires enhanced security features. Which system component replaces the existing Media Cards to complete the upgrade? A. CPPM Signaling Server B. Media Gateway Controller Card with daughterboards C. None, Media Cards can be re-used D. COTS Signaling Server Answer(s): B Question: 7 A customer is migrating an Option 11C at Rls. 5.5 to a Communication Server (CS) 1000E Rls. 6.0 Co-resident system. In this scenario, what happens to the existing ITG Trunk ISMs? A. They may be removed from the system and lost. B. They may be converged to H.323 trunks at a minimum charge. C. They may be converted to SIP Access Ports at a minimum charge. D. They may be converted to H.323 trunks or SIP Access Ports at no charge. Question: 8

3 3 A customer is migrating an existing Media Gateway (MG) 1000B Rls. 4.5 to a Communication Server (CS) 1000E Rls. 6.0 Co-resident system. They want to utilize Media Security (SRTP). Which hardware component(s) can be used to replace the Media Cards to support this requirement? (Choose two.) A. COTS Server B. Media Card 32 (MC32) C. Call Processor Pentium Mobile D. DSP Daughterboards on the Media Gateway Controller Card Answer(s): B, D Question: 9 A customer is migrating an Option 11C Rls. 4.5 system to a CS 1000E Rls. 6.0 system. The customer is re-using the Option 11C chassis and is replacing the SSC card with a CPPM Coresident card and associated Media Gateway Controller card. Which slot cannot house the CPPM Co-resident card? A. Slot 0 B. Slot 1 C. Slot 3 D. Slot 4 Answer(s): A Question: 10 A customer with a Media Gateway (MG) 1000B Rls. 4.5 is planning to upgrade the MG 1000B to Rls What must be done to the Signaling Server to complete the upgrade? A. replace the hardware with a COTS or a CP PM Signaling Server B. upgrade the Signaling Server software to Rls. 6.0 only C. replace the hardware with a CP PM Co-resident Call Server and Signaling Server D. upgrade to 2GB memory, add the new hard drive, then upgrade to Rls. 6.0 Question: 11 A customer is upgrading an existing Communication Server (CS) 1000S Rls. 4.5 to a CS 1000E Rls Which hardware component replaces an SSC controller card in a Media Gateway 1000E? A. Call Processor Pentium Mobile B. DSP Daughterboard C. Media Gateway Controller Card D. Media Card 32 Port Security Question: 12

4 4 A customer is migrating an Option 81C Rls. 5.0 to a Communication Server (CS) 1000M Multi- Group Rls. 6.0 system. Which Call Server/Signaling Server options are available to the customer? (Choose two.) A. CPPM VxWorks Call Server/CPPM VxWorks Signaling Server B. CPPM VxWorks Call Server/CPPM Linux Signaling Server C. CPPIV Call Server/CPPM Linux Signaling Server D. CPPIV Call Server/COTS Linux Signaling Server, D Question: 13 A customer is upgrading an existing Communication Server (CS) 1000E Rls. 4.5 to a CS 1000E Rls. 6.0 HA system. Which call processors are supported in the upgraded system? (Choose two.) A. CP4 B. CPPM C. CPPII D. CPPIV Answer(s): B, D Question: 14 A customer with multiple system types at various locations would like to upgrade their entire network to Communication Server (CS) 1000 Rls Each location is currently running CS 1000 Rls Which two locations would require call processor upgrades in order to be eligible for an upgrade to Rls. 6.0? (Choose two.) A. Site A - CS 1000M CPPII B. Site B - CS 1000M CPPIV C. Site C - CS 1000E CPPII D. Site D - CS 1000E CPPM Question: 15 A customer is planning to upgrade an existing Communication Server (CS) 1000E SA system running Rls to a CS 1000E HA system running Rls Which call processor options does the customer have? (Choose two.) A. CPPM with VxWorks Operating System B. CPPM with Linux Operating System C. CPPIV with VxWorks Operating System D. CPPIV with Linux Operating System Question: 16

5 5 A customer is upgrading an existing Media Gateway (MG) 1000B Rls. 4.5 to an MG 1000B Rls At a minimum, which two components must be replaced as part of the upgrade? (Choose two.) A. Nortel ISP 1100 Signaling Server B. Primary Rate Card (PRI) C. SSC Card D. Voice Gateway Media Card Question: 17 A customer is upgrading their Communication Server 1000E network to release 6.0 and wants to provide UNIStim Signaling security between their Signaling Severs and IP telephones. Which protocol is used to provide the encryption? A. IPSec B. SRTP C. SIP TLS D. DTLS Question: 18 A customer currently has an Option 11C Rls. 5.0 system and wants to upgrade to release 6.0. They have no IP telephones. In this scenario, which Call Server would be used on the new Communication Server 1000E TDM system? A. SSC Card B. CPPM Linux Call Server C. CPPM VxWorks Call Server D. CPPM Co-resident Call Server and Signaling Server Question: 19 A customer is upgrading an existing Media Gateway (MG) 1000T Rls.4.5 with an expansion chassis and four TMDI modules, converting it into a stand-alone Communication Server 1000E Rls. 6.0 with two IP Media Gateways. Each of the new Media Gateways includes a Media Gateway Controller Card with two TMDI modules with an associated clock controller. How many DSP channels does Enterprise Configurator (EC) provision per Media Gateway with this configuration? A. 32 B. 64 C. 96 D. 128