TD-SILENT Series (160 to 1000 models) TD-SILENT Series (1300 and 2000 models) NEW TD-SILENT. In-Line duct fans

Transcription

1 IN-LINE MIXED LOW DUT ANS ultra-quiet Series (16 to 1 models) Low profile Mixed-flow fans with sound-absorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD-35, TD-5, TD-8 and TD-1 models). Manufactured in plastic material, with a specifically designed internal skin to direct the sound waves in the right angle for them to be captured by the sound-absorbent material (1). itted with rubber gaskets on the inlet and outlet to absorb vibrations, a body that can be dismantled. onnection box can be rotated 36º, to facilitate easy connection of the power cable. Motors Speed controlable 3 V 5 Hz motor, of two speed motors. Motors are IP44, class, with ball bearings and safety thermal overload protection. (1) Except the TD-16 SILENT, that is fitted with the special floating motor system patented by S&P. Series (13 and models) NEW Additional information MIXVENT TD-T models fitted with a Run-On- Timer adjustable within 1 and 3 minutes and one-speed motor not suitable for speed control. Three phase models adjustable by inverter control. Low profile Mixed-flow fans with soundabsorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD- model). onstructed from sheet steel with epoxy polyester paint, acoustic insulation (MO) glass fibre, within outer shell. Aerodynamic inlet to improve air flow and reduce sound. Detachable fan unit without demounting duct connections. External terminal box IP55. Removeable fan body with speed motor, single phase 3V-5/6Hz speed controlable, IP44, lass, external rota aluminium motor with capacitor and thermal protection. Additional information The models offer solutions to ventilation problems, especially in places where people work and low sound level is required.

2 5 t o 1 m o d e l s Low profile Low noise level 1 The low profi le of the fans makes them the most effective Sound waves produced inside the TD, are directed through the solution for installations where the space of installation is limited such perforated inner skin as false ceilings. material Easy maintenance onnection box rotated 36º 1 and absorbed by the layer of sound-absorbent. lexible washers Support bracket i-material support brackets, onnection box can be rotated i-material inlet and outlet Support bracket for installing on which in addition to simplifying 36º, to facilitate easy connec- incorporating a flexible washer to a wall or ceiling, incorporating installation, serve as joint seals. tion of the power cable. facilitate installation and absorb twin-material support brackets vibrations. for the motor section that absorbs vibration. Easy to mount Models with Run-On-Timer Remove the fan body Remove the terminal box lid onnect electrical supply tightening the clamps 1 6 MODEL Silent-elastic-blocks TD-16/1N SILENT model offer very low noise level, with a motor mounted on silentelastic-blocks which absorb the vibrations -T models (from 5 to 1 models) are fitted with an adjustable timer between 1 and 3 minutes and are supplied with a one-speed motor not suitable for speed control Remount the fan body by Loosen and open clamps on both sides

3 1 3 a n d m o d e l s Low profile - compact Easy maintenance Low profile fans TD-13/5 SILENT and TD-/315 SILENT are ideal for installations where space is very small, as in false ceilings. Detachable fan unit for maintenance, or cleaning, without demounting duct connections. Low noise level Support bracket IP55 remote terminal box Acoustic insulation (MO) glass fibre Outer shell Aerodynamic inlet to improve air flow and reduce sound Attenuating perforated skin Suitable for wall or ceiling mounting. ixing brackets to the motor-body included. Easy installation and connection.

4 Technical characteristics Model Speed (r.p.m.) Maximum absorbed power (W) Maximum absorbed current (A) Duty at free discharge (m 3 /h) Maximum operating temp. (º) Sound pressure level* (d(a)) Ø Duct (mm) Weight (Kg) TD-16/1 N SILENT 5 5 1,16, / ,4 TD-5/1 SILENT ,11, / ,4 TD-35/15 SILENT ,13, / ,94 TD-5/15-16 SILENT ** ,, / /16 6, TD-8/ SILENT ,45, / ,7 TD-1/ SILENT 5 1 1,5, /+6 1 8,7 TD-13/5 SILENT ,83, / , TD-/315 SILENT ,8, / , * Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet. ** It provides an additional rubber gasket for installation in 16 mm ducts. Model Speed (r.p.m.) Maximum absorbed power (W) Maximum absorbed current (A) Duty at free discharge (m 3 /h) Maximum operating temp. (º) Sound pressure level* (d(a)) TD-5/1 SILENT-T 4, ,4 TD-35/15 SILENT-T 5 3, ,94 TD-5/15-16 SILENT-T 5 5, /16 6 TD-8/ SILENT-T 78 95, ,7 TD-1/ SILENT-T 5 1, ,7 * Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet. Ø Duct (mm) Weight (Kg)

5 Dimensions (mm) TD-16/1 N SILENT 5 to 1 5 to 1 A Ø D Ø E G H TD-5/ TD-35/ TD-5/15-16* TD-8/ TD-1/ * It provides an additional rubber gasket for installation in 16 mm ducts. 13 and 13 and A D E G H TD-13/5 SILENT TD-/315 SILENT

6 Performance curves Q = Air volume in, m 3 /hr and m 3 /s. Ps = Static pressure in mmwg and Pa. Dry air at º and 76 mmhg. Performance data in accordance with ISO 581, AMA 1-99 Standards and S 848 part :1985. = High speed = Low speed Ps Pe Pa mmwg mmcda Pabs (W) 6 TD-16/1 SILENT 5 4 Ps Pe Pa mmwg mmcda Pabs (W) 8 TD-5/1 SILENT E E 3 1 D A Q (m 3 /h) D A Q(m 3 /h) Q (m 3 /s) Q(m 3 /s) Ps Pe Pa mmwg mmcda Pabs (W) 8 TD-35/15 SILENT D A Q(m 3 /h) Ps Pe Pa mmwg mmcda Q(m 3 /s) E Pabs (W) 3 TD-8/ SILENT E Ps Pe Pa mmwg mmcda Ps Pe Pa mmwg mmcda 4 4 E Pabs (W) 18 TD-5/15-16 SILENT 15 1 D A Q(m 3 /h) Q(m 3 /s) E Pabs (W) 4 TD-1/ SILENT D A Q (m 3 /h) D A Q(m 3 /h) Q (m 3 /s) Q(m 3 /s)

7 Performance curves Q = Air volume in, m 3 /hr and m 3 /s. Ps = Static pressure in mmwg and Pa. Dry air at º and 76 mmhg. Performance data in accordance with ISO 581, AMA 1-99 Standards and S 848 part :1985. Ps mmwg Ps mmwg Acoustic characteristics Sound power spectrum: The sound levels shown in these tables are sound power levels at the discharge, radiated and inlet, in d(a) for frequency ranges at points of the curve: (A or D) free discharge, ( or E) medium pressure, ( or ) maximum pressure. () high speed, () low speed. Performance data in accordance with ISO TD-16/1 SILENT LwA LpA* A A RADIATED A Outlet TD-5/1 SILENT LwA LpA* A A RADIATED A OUTLET TD-35/15 SILENT LwA LpA* A A RADIATED A OUTLET TD-16/1 SILENT LwA LpA* D E D RADIATED E D OUTLET E TD-5/1 SILENT LwA LpA* D E D RADIATED E D OUTLET E TD-35/15 SILENT LwA LpA* D E D RADIATED E D OUTLET E * Sound pressure level radiated at 3 m. in free field condition, with rigid ducts at the inlet and outlet.

8 Acoustic characteristics Sound power spectrum: The sound levels shown in these tables are sound power levels at the discharge, radiated and inlet, in d(a) for frequency ranges at points of the curve: (A or D) free discharge, ( or E) medium pressure, ( or ) maximum pressure. VR, fast speed. VL, slow speed. Performance data in accordance with ISO TD-5/15 SILENT LwA LpA* A A RADIATED A OUTLET TD-5/15 SILENT LwA LpA* D E D RADIATED E D OUTLET E TD-8/ SILENT LwA LpA* A A RADIATED A OUTLET TD-8/ SILENT LwA LpA* D E D RADIATED E D OUTLET E TD-1/ SILENT LwA LpA* A A RADIATED A OUTLET TD-1/ SILENT LwA LpA* D E D RADIATED E D OUTLET E TD-13/5 SILENT LwA LpA* A A RADIATED A OUTLET TD-/315 SILENT LwA LpA* A A RADIATED A OUTLET TD-13/5 SILENT LwA LpA* D E D RADIATED E D OUTLET E TD-/315 SILENT LwA LpA* D E D RADIATED E D OUTLET E * Sound pressure level radiated at 3 m. in free field condition, with rigid ducts at the inlet and outlet.

9 Practical examples of installing TD SILENT range TD Silent range offers one of the most versatile fansystems on the market today. Due to its flexibility it can be used in a multitude of small or medium fan installations. Especially in places where working people and the ventilation system works for many hours, in these cases the sound level becomes an essential element for comfort.

10 Mounting accessories MA-S Non-return flaps to be installed at the fan discharge. They prevent heat leakages when the extractor is not operating. d a MA-S model range MA - 5 S 16/1N - 5/1 MA - 35 S 35/15 MA - 5/15 S 5/15 MA - 5/16 S 5/16 MA S 8/ - 1/ MA model range MA /5 MA - /315 MA-S model A Ø Ø D MA - 5 S ,5 94,5 MA - 35 S ,5 119,5 MA - 5/15 S , MA - 5/16 S , MA S 131, ,5 MA model A Ø Ø D MA , MA MAR-S Rectangular Duct Adapters enable connection to rectangular ducting. e a ø G MAR-S model range Nominal dimensions of the duct L x H MAR S 16/1N - 5/1-35/15 4 x 14 MAR - 5-S 5/15 8 x 18 MAR S 8/-1/ 315 x MAR-S model A E Ø G MAR S , MAR - 5-S MAR S MAR model range Nominal dimensions of the duct L x H MAR /5 4 x 5 MAR - /315 5 x 315 MAR model A E Ø G MAR MAR MRJ-S Grilles mounted at the inlet or outlet of the fan, to prevent the entry of any foreign objects that could damage the fan. MRJ-S model range MRJ S 16/1N - 5/1-35/15 MRJ - 5/15-16-S 5/15-5/16 MRJ S 8/ - 1/ MRJ model range MRJ /5 MRJ - /315

11 Mounting accessories MP-S low detectors designed to correctly measure pressures at the inlet of series TD devices with airflow straightner. MP-S model range MP-5 S 5/1 MP-35 S 35/15 MP-5/15 S 5/15-5/16 MP-5/16 S 5/16 MP-8-1 S 8/ - 1/ MP model range MP-1 13/5 MP- /315 MP-S model A D E G H MP-5 S 18 18,7 94, ,5 36,5 15,5 MP-35 S MP-5/15 S MP-5/16 S MP-8-1 S MP model A D E G H MP MP MR-S langes allowing the coupling of TD-Silent fans in series. MR-S model Ø of the conduct MR-5-35 S 15 MR-5 S 15 MR-8-1 S MR model Ø of the conduct MR-1 5 MR- 315

12 Electrical accessories REGUL speed switch. RE Single phase electronic speed controller. ONTROL EOWATT A/4A ontrol element for demand controlled ventilation systems in public, commercial residential buildings that automatically modifies the fan speed to adapt it to the needs defined in the system, measured with sensors. VAPZ Electronic single phase regulator that controls the fan speed with a simple contact (presence detector) or an analogical input, -1 V or 4- ma ( probe for relative humidity % RH). SO-A Ambient and temperature sensor. SO-AD Ambient and temperature sensor, with display. SHT-AD Ambient,temperature and relative humidity with display. PL-S / PL-E Presence detector for wall fitting, sensitive to infrared radiation by bodies in movement, with a 36º detecting angle. Power supply:1-3 V. TDP-S / TDP-D Presure sensor. Enables you to control the pressure in the fan inlet. Presure range: -5 Pa. Output signal: -1V/4- ma. REMP Motorised damper, opening proportionally and controlled by the EAS control module. Power supply: 4 VA or 4 VD, depending on the models.