EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1

Transcription

1 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide REV 01 EMC Corporation Corporate Headquarters: Hopkinton, MA

2 Copyright 2013 EMC Corporation. All rights reserved. Published September 2013 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS IS. EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. For the most up-to-date listing of EMC product names, see EMC Corporation Trademarks on EMC.com. All other trademarks used herein are the property of their respective owners. 2 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

3 Contents Preface... 5 Chapter 1 Chapter 2 Introduction Overview EMC SourceOne for Microsoft SharePoint Storage Management features...10 EMC SourceOne for Microsoft SharePoint features...10 RBS features Feature details...11 Compare: Native Microsoft Support and SourceOne RBS...12 Accounts and permissions Installation permissions Run-time permissions System requirements Microsoft SharePoint software Installing Microsoft SharePoint RBS Support Installation overview Configure environment variables (optional) Deploy RBS software RBS software installation components...18 Prerequisites...19 Install the primary SourceOne administration site...19 Install the RBS Provider...24 Deploy the SourceOne RBS administration sites...28 Deploy the RBS Provider Service...29 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide 3

4 Contents Maintaining the installation Maintaining SharePoint WSP solutions Maintaining Microsoft Windows Installer installations Chapter 3 Uninstalling Microsoft SharePoint RBS Support Uninstallation overview Prerequisites Uninstalling SharePoint RBS by using a command script Uninstalling SharePoint RBS by using the user interface EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

5 Preface As part of an effort to improve and enhance the performance and capabilities of its product lines, EMC periodically releases revisions of its hardware and software. Therefore, some functions described in this document may not be supported by all versions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes. If a product does not function properly or does not function as described in this document, please contact your EMC representative. Audience Related documentation This document is part of the EMC SourceOne documentation set, and is intended for use by installers of the product, EMC SourceOne system administrators, and mail server administrators. Related documents include: EMC SourceOne for Microsoft SharePoint Storage Management Administration Guide EMC SourceOne for Microsoft SharePoint Storage Management Release Notes EMC SourceOne Products Compatibility Guide EMC SourceOne Localized Product Release Notes EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide 5

6 Preface Conventions used in this document EMC uses the following conventions for special notices. Note: A note presents information that is important, but not hazard-related.! CAUTION A caution contains information essential to avoid data loss or damage to the system or equipment.! IMPORTANT An important notice contains information essential to operation of the software. WARNING A warning contains information essential to avoid a hazard that can cause severe personal injury, death, or substantial property damage if you ignore the warning. DANGER A danger notice contains information essential to avoid a hazard that will cause severe personal injury, death, or substantial property damage if you ignore the message. Typographical conventions EMC uses the following type style conventions in this document: Normal Used in running (nonprocedural) text for: Names of interface elements (such as names of windows, dialog boxes, buttons, fields, and menus) Names of resources, attributes, pools, Boolean expressions, buttons, DQL statements, keywords, clauses, environment variables, filenames, functions, utilities URLs, pathnames, filenames, directory names, computer names, links, groups, service keys, file systems, notifications Bold: Used in running (nonprocedural) text for: Names of commands, daemons, options, programs, processes, services, applications, utilities, kernels, notifications, system call, man pages 6 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

7 Preface Italic: Courier: Courier bold: Used in procedures for: Names of interface elements (such as names of windows, dialog boxes, buttons, fields, and menus) What user specifically selects, clicks, presses, or types Used in all text (including procedures) for: Full titles of publications referenced in text Emphasis (for example a new term) Variables Used for: System output, such as an error message or script URLs, complete paths, filenames, prompts, and syntax when shown outside of running text Used for: Specific user input (such as commands) Courier italic: Used in procedures for: Variables on command line User input variables < > Angle brackets enclose parameter or variable values supplied by the user [ ] Square brackets enclose optional values Vertical bar indicates alternate selections - the bar means or { } Braces indicate content that you must specify (that is, x or y or z)... Ellipses indicate nonessential information omitted from the example Where to get help EMC support, product, and licensing information can be obtained as follows. Product information For documentation, release notes, software updates, or information about EMC products, go to EMC Online Support at: Technical support Go to EMC Online Support and click Service Center. You will see several options for contacting EMC Technical Support. Note that to open a service request, you must have a valid support agreement. Contact your EMC sales representative for details about obtaining a valid support agreement or with questions about your account. EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide 7

8 Preface Online communities Visit EMC Community Network at for peer contacts, conversations, and content on product support and solutions. Interactively engage online with customers, partners, and certified professionals for all EMC products. Guide to using this document This document supports online reading using Adobe Reader version 7.0 or above. For optimal performance, you should download and install the latest free Adobe Reader version: ( Simplifying navigation This document uses hyperlinks to other relevant sections. You can simplify navigation by enabling an optional Web browser-like navigation feature in Adobe Acrobat Reader (version 7.0 or above): 1. On the Acrobat toolbar, right-click the Page Up or Page Down icon. Page Up Page Down 2. Click Show All Tools. The Previous View and Next View navigation buttons are displayed on your toolbar. Previous View Next View The Previous View and Next View navigation buttons function similar to your Web browser navigation buttons, enabling you to navigate between views using document hyperlinks. More information For more information about Adobe Reader navigation and other features, refer to the product help system. Your comments Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the user publications. Send your opinions of this document to: 8 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

9 1 Introduction This release of EMC SourceOne for Microsoft SharePoint Storage Management provides Atmos support for Remote BLOB Storage (RBS). The release also includes encryption and compression for BLOBs. RBS is used with Microsoft SharePoint Foundation 2010/2013 and Microsoft SharePoint Server 2010/2013 and provides administrators with advanced options to off-load and manage storage of binary large objects from the SharePoint SQL Server. This chapter is organized as follows: Overview RBS features Accounts and permissions System requirements Introduction 9

10 Introduction Overview This release of EMC SourceOne for Microsoft SharePoint Storage Management provides Atmos support for Remote BLOB Storage (RBS). The release also includes encryption and compression for BLOBs. EMC SourceOne for Microsoft SharePoint Storage Management features This installation guide describes how to install EMC SourceOne for Microsoft SharePoint Storage Management. This release provides support for Remote BLOB Storage (RBS) which is used specifically with Microsoft SharePoint Foundation 2010/2013 and Microsoft SharePoint Server 2010/2013. RBS provides the ability to externalize the storage of BLOBs outside of the SharePoint SQL Server and on the Atmos Server. BLOBs can be encrypted. BLOB can be compressed. EMC SourceOne for Microsoft SharePoint features EMC SourceOne for Microsoft SharePoint is a separate product which provides the following SharePoint-related features: Archiving Search External BLOB Storage (EBS) Refer to the documentation set provided with this product for information on installing and configuring these features. 10 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

11 Introduction RBS features Deploying the SourceOne RBS software installs the EMC SourceOne RBS Provider in the farm and adds the full set of user interfaces to your Microsoft SharePoint Foundation 2010/2013 or Microsoft SharePoint Server 2010/2013 Central Administration site. Feature details Feature details include: Content Database Settings Provides configuration settings for storing BLOB content normally stored in the SharePoint 2010/2013 database in remote storage. Migration Service Migrates BLOBs from External BLOB Storage (EBS), the SharePoint SQL database, or another RBS store to the EMC SourceOne RBS store. Maintenance Service Performs periodic garbage collection and other maintenance. Health Monitor Monitors RBS storage for available free space and provides alerts based on configured thresholds. Enhanced EMC SourceOne Primary Administration site An updated EMC SourceOne primary administration site is provided which includes links to RBS-specific configuration information. For more details about these interfaces and their use, refer to the EMC SourceOne for Microsoft SharePoint Storage Management Administration Guide. RBS features 11

12 Introduction Compare: Native Microsoft Support and SourceOne RBS SourceOne RBS provides advanced features which enhance the native support that Microsoft provides. Table 1 Native Microsoft Support and SourceOne RBS feature comparison Area Native Microsoft Support SourceOne RBS features Health monitoring Migration Maintenance Administrators must manually monitor RBS storage. Administrators can migrate all content through a Powershell command a. However, once migration is started, it cannot be paused, and must run until complete, potentially impacting SharePoint performance when running. The PowerShell command migrates BLOBS at the content database level. No migration reporting features. The SQL RBS Feature Pack provides a basic console application b to perform maintenance by creating Windows tasks for each content database. May be a challenge to use in large environments with many content databases. To customize, administrators must modify the application s config file manually. No reporting functionality. Must monitor application console in real-time. The health monitoring page provides a centralized dashboard, enabling you to configure storage thresholds and automated alerts. The Migration Service provides more granular control of BLOB migration, enabling you to set time limits which, when reached, pause the migration job. The job then automatically resumes according to the schedule you configure. The Migration Service allows you to configure migration scope at the content database or site collection level. Provides job and content database migration information. The Maintenance Service leverages the SQL RBS feature pack application, but also provides a centralized configuration page to manage the Windows tasks for a specified content database. Configuration page enables you to remove unnecessary tasks and modify maintenance parameters. The configuration page enables you to modify the application config file to add corresponding content database connection strings. Enables you to view task reports. a. See for details. b. See for details. 12 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

13 Introduction Accounts and permissions Review and establish the following accounts and permissions required for the RBS feature. Installation permissions The installation account used to install software on a SharePoint server must be a member of the following groups: Local Administrators group for the computer on which installations are run as well as all SharePoint web front-end servers. If User Account Control (UAC) is used, select Run as administrator when running the installation. SharePoint Farm Administrators (Full Access) group. Members of this group have full access to all settings in the farm. They can also take ownership of any content site. SharePoint Central Administration Site Collection Administrators group. Run-time permissions RBS features require the following run-time permissions: Impersonation account credentials with read/write access to RBS storage locations. The Central Administration Pool Account must have necessary privileges to access the Windows Task Schedule of other SharePoint Web front-end servers. Refer to the EMC SourceOne for Microsoft SharePoint Storage Management Administration Guide for details on configuring these permissions. Accounts and permissions 13

14 Introduction System requirements Review and establish the following system requirements. Note: Refer to the EMC SourceOne for Microsoft SharePoint Storage Management Release Notes for detailed compatibility information. Microsoft SharePoint software The RBS feature requires a supported version of Microsoft SharePoint Foundation 2010/2013 or Microsoft SharePoint Server 2010/2013 on an operating supported by that product. The RBS feature requires that Microsoft RBS support be installed as a prerequisite. RBS is a Microsoft SQL Server library API set that is incorporated as an add-on feature pack for supported versions of Microsoft SQL Server 2008 and 2012 Enterprise Edition. Install the appropriate RBS support for your environment. The following resources may provide additional information: Microsoft SharePoint Foundation 2010: Microsoft SharePoint Server 2013/SharePoint 2013: For specific details refer to the Microsoft documentation set. 14 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

15 2 Installing Microsoft SharePoint RBS Support This chapter describes how to install the components which support the EMC SourceOne for Microsoft SharePoint Storage Management features. Each section in this chapter is presented in the order in which the components should be installed, as some installed components are dependent on previously installed components. This chapter is organized as follows: Installation overview Configure environment variables (optional) Deploy RBS software Maintaining the installation Note: This document uses hyperlinks to other relevant sections. You can simplify navigation by enabling an optional Web browser-like navigation feature in Adobe Acrobat Reader (version 7.0 or above). For details, see Guide to using this document on page 8. Installing Microsoft SharePoint RBS Support 15

16 Installing Microsoft SharePoint RBS Support Installation overview The folllowing table provides an overview of the EMC SourceOne for Microsoft SharePoint Storage Management installations presented in the order in which you should perform them. Table 2 Installation procedure overview Installation/ Configuration Details Procedure Verify environment variables Install RBS software Configure SharePoint sites and services Verify that the Microsoft Windows system path environment variable includes the SharePoint system path for your operating system Install and deploy the SharePoint Remote BLOB Storage (RBS) software. Use the SharePoint administration sites to configure RBS settings and functionality. Configure environment variables (optional) on page 17. Deploy RBS software on page 18 Refer to the EMC SourceOne for Microsoft SharePoint Storage Management Administration Guide. 16 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

17 Installing Microsoft SharePoint RBS Support Configure environment variables (optional) For convenience prior to installing EMC SourceOne RBS software you can modify the Microsoft Windows system path environment variable to include the SharePoint system path for your operating system. 1. Right-click My Computer. 2. Select Properties > Advanced system settings. 3. Click Environment Variables. 4. In the System Variables section, click the Path variable and click Edit. 5. Check that a SharePoint system path exists. If necessary, append the following system variable: C:\Program Files\Common Files\Microsoft Shared\web server extensions\14\bin; Note: If the SharePoint Server version is 2013, append this system variable: C:\Program Files\Common Files\Microsoft Shared\webserver extensions\15\bin; 6. Click OK on all open dialog boxes to apply the changes. Configure environment variables (optional) 17

18 Installing Microsoft SharePoint RBS Support Deploy RBS software This section includes the following topics: RBS software installation components Prerequisites Install the primary SourceOne administration site Install the RBS Provider Deploy the SourceOne RBS administration sites Deploy the RBS Provider Service RBS software installation components The SourceOne RBS software kit includes the following installation components: Table 3 RBS software package contents Component Description Where installed Procedure EMCES1.Administration.wsp SourceOne primary administration site which includes links to RBS configuration pages. Central Administration host server Install the primary SourceOne administration site on page 19 ES1_RBSSetup.exe Installs RBS Provider software. All web front-end servers in the farm Install the RBS Provider on page 24 EMCES1.RBSProviderPremium.wsp Provides the SharePoint user interfaces included with SourceOne RBS. Central Administration host server Deploy the SourceOne RBS administration sites on page 28 EMCES1.ProviderService.wsp Provides global Windows timer job support on all web front-end servers for the Health Monitor and Migration Service. Deployed globally to all web front-end servers Deploy the RBS Provider Service on page EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

19 Installing Microsoft SharePoint RBS Support Prerequisites Ensure that the prerequisites provided in this section are met before installing RBS software. Permissions Ensure the installation account meets the prerequisites described in Accounts and permissions on page 13. Install Microsoft RBS support Install the prerequisite Microsoft RBS feature pack for SQL Server as described in System requirements on page 14. Install the primary SourceOne administration site The primary SourceOne administration site (and language packs, if applicable) are prerequisites to installing the RBS-specific SourceOne components. Main portal Language packs The primary SourceOne administration site is the portal for all SourceOne for Microsoft SharePoint features. Specifically for EMC SourceOne for Microsoft SharePoint Storage Management, the administration site is enhanced to include links to the RBS configuration pages. The updated primary administration site (EMCES1.Administration.wsp) is provided in the RBS software kit. In addition, updated language packs for this site are provided on Powerlink. The language packs provide localized versions of the updated primary administration site, and can be applied after installing (or upgrading) the primary administration site. Deploy RBS software 19

20 Installing Microsoft SharePoint RBS Support Figure 1 Installing or upgrading the primary administration site RBS links on the primary administration site The process for installing the updated primary administration site to support RBS is slightly different depending on whether you are upgrading an existing solution or installing the solution for the first time. The procedures in this section describe these differences where appropriate. Add solution to the store 1. Copy the SourceOneAdmin folder containing the EMCES1.Administration.wsp solution from the RBS core (English) software kit to a temporary location on the host computer for your SharePoint Central Administration site. 2. Open a command prompt and navigate to the temporary location. 3. Do one of the following, depending on your environment. If you are installing the solution for the first time, use the addsolution command: stsadm -o addsolution -filename EMCES1.Administration.wsp If you are upgrading an existing solution, use the upgradesolution command: stsadm -o upgradesolution -filename EMCES1.Administration.wsp 20 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

21 Installing Microsoft SharePoint RBS Support Deploy the solution Do one of the following, depending on your environment. Upgrade installation If you are upgrading an existing solution, type the following command: stsadm -o deploysolution -filename EMCES1.Administration.wsp -force Continue to Optional: Deploy language pack solution(s) - new installations only on page 22. New installation If you are installing the solution for the first time, you can deploy it from the Central Administration site: 1. Navigate to Central Administration > System Settings > Farm Management > Manage farm solutions. 2. Click emces1.administration.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Select the Central Administration Web application (e.g., 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.administration.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Deploy RBS software 21

22 Installing Microsoft SharePoint RBS Support Optional: Deploy language pack solution(s) - new installations only Updated SharePoint-side language pack solutions for the primary administration site are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Ensure that you use the latest language pack solutions provided for RBS. Install one or more language packs as part of the initial installation (prior to activating features). To a install language pack during initial installation: 1. Copy the folder containing the language pack a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. 3. Navigate to the temporary location in which the WSP file is located. For example, the French WSP file for the primary administration site is provided in the SourceOneAdmin\fr-FR folder. 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the EMC SourceOne administration site, use the following command: stsadm -o addsolution -filename EMCES1.Administration.wsp -lcid Navigate to Central Administration > System Settings > Farm Management > Manage farm solutions. 6. Click the language pack solution WSP file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the administration site is displayed as follows: emces1.administration.wsp(1036) 22 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

23 Installing Microsoft SharePoint RBS Support 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure. Activate features The site provisioning feature is a hidden feature which can only be activated using an stsadm command: 1. Click Start > Run and type cmd 2. Navigate to the SourceOneAdmin folder. 3. Type the following command: stsadm -o activatefeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force Restart IIS Restart IIS using the iisreset /noforce command. Note: If you choose to not force the restart of IIS at this time, you must restart it at a later time to complete the configuration. Validate the deployment To validate the deployment: 1. Navigate to the Central Administration home page. 2. Verify that an EMC SourceOne tab is now displayed. Figure 2 EMC SourceOne tab 3. Click the EMC SourceOne tab. The EMC SourceOne administration site displays. Deploy RBS software 23

24 Installing Microsoft SharePoint RBS Support Install the RBS Provider! Install the RBS Provider software which provides the Remote BLOB Storage functionality for Microsoft SharePoint Foundation 2010/2013 or Microsoft SharePoint Server 2010/2013. IMPORTANT You must install the RBS Provider software on all SharePoint web front-end servers in your SharePoint farm. Perform this procedure on each SharePoint server in the farm. 1. Log in to the host computer using an account with privileges as described in Prerequisites on page 19. If User Account Control (UAC) is used, select Run as administrator when running the installation. 2. Navigate to the SourceOneRBSProvider\RBSProvider folder on the EMC SourceOne for Microsoft SharePoint Storage Management software kit and copy it locally. 3. Double-click ES1_RBSSetup.exe. The Welcome page displays. Figure 3 InstallShield welcome screen 4. Click Next to display the Destination Folder page. 24 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

25 Installing Microsoft SharePoint RBS Support Figure 4 Destination Folder If EMC SourceOne (or third party) EBS software or third party RBS software is already installed, a warning message displays indicating that this software is still active and that SourceOne RBS will be enabled. If displayed, confirm this message and continue with the installation. 5. Accept the default location (C:\Program Files\EMC SourceOne\RBS) or click Change to choose another location. 6. Click Next. The Maintenance Folder page displays. Deploy RBS software 25

26 Installing Microsoft SharePoint RBS Support Figure 5 Maintenance Folder 7. Do one of the following: If you installed the Microsoft RBS feature pack to the default Maintainer directory (e.g., C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\), click Next. If you installed the Microsoft RBS feature pack to a different directory, click Change and navigate to the Maintainer directory. Click OK and click Next. 8. Click Next. The Ready to Install the Program page displays. 26 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

27 Installing Microsoft SharePoint RBS Support Figure 6 Begin Install screen 9. Click Install. The InstallShield Wizard Completed page displays. Click Finish. Deploy RBS software 27

28 Installing Microsoft SharePoint RBS Support Deploy the SourceOne RBS administration sites Deploying this solution provides a customized user interface for administrators to configure EMC SourceOne RBS features and configuration user interfaces in SharePoint (Content Database Settings, Health Monitor, Migration Service and Maintenance Service). Deployment includes the following procedures: Configure environment variables (optional) Add solution to the store Deploy the solution Configure environment variables (optional) For convenience, you can modify the Microsoft Windows system path environment variable to include the SharePoint system path for Windows Server 2008 as described in Configure environment variables (optional) on page 17 Add solution to the store Add the solution to the solution store: 1. Copy the RBSProviderPremiumUI directory on the EMC SourceOne for Microsoft SharePoint Storage Management software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd 3. Navigate to the temporary location. 4. Type the following command: stsadm -o addsolution -filename EMCES1.RBSProviderPremium.wsp Deploy the solution From the Central Administration site: 1. Navigate to Central Administration > System Settings > Farm Management > Manage farm solutions. 2. Click emces1.rbsproviderpremium.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 28 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

29 Installing Microsoft SharePoint RBS Support 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Select the Central Administration Web application (e.g., 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.rbsproviderpremium.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Deploy the RBS Provider Service Deploying this solution provides the RBS Provider Service to all content web applications in the farm. Deployment includes the following procedures: Add solution to the store Deploy the solution Optional: Deploy language pack solution(s) Restart IIS Validate the deployment Validate the deployment Next steps Add solution to the store Add the solution to the solution store: 7. Click Start > Run and type cmd 8. Navigate to the RBSProviderPremiumUI folder. 9. Type the following command: stsadm -o addsolution -filename EMCES1.RBSProviderService.wsp Deploy RBS software 29

30 Installing Microsoft SharePoint RBS Support Deploy the solution From the Central Administration site: 1. Navigate to Central Administration > System Settings > Farm Management > Manage farm solutions. 2. Click emces1.rbsproviderservice.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? No option is provided, as the solution must be applied globally. 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.rbsproviderservice.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Install one or more language packs as part of the initial installation (prior to activating features). To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. 3. Navigate to the temporary location. 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number 30 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

31 Installing Microsoft SharePoint RBS Support For example, to install the French language pack for the RBS administration site, use the following command: stsadm -o addsolution -filename EMCES1.RBSProviderPremium.wsp -lcid Navigate to Central Administration > System Settings > Farm Management > Manage farm solutions. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the administration site is displayed as follows: emces1.rbsproviderpremium.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure. Restart IIS Restart IIS using the iisreset /noforce command. Note: If you choose to not force the restart of IIS at this time, you must restart it at a later time to complete the configuration. Activate features Validate the deployment From the Central Administration site: 1. Navigate to Central Administration > System Settings > Farm Management > Manage farm features. 2. Click Activate to activate the EMC SourceOne RBS Provider Configuration and Maintenance feature. To validate the deployment: 1. Navigate to the Central Administration home page. 2. Click the EMC SourceOne tab. The EMC SourceOne administration site displays. 3. Ensure the RBS Provider settings are displayed. Deploy RBS software 31

32 Installing Microsoft SharePoint RBS Support Next steps Refer to the "Configuring SharePoint Remote BLOB Storage (RBS)" chapter in the EMC SourceOne for Microsoft SharePoint Storage Management Administration Guide for details on configuring RBS features and activities. Maintaining the installation This section provides information on maintaining installation of the components described in this chapter. Maintaining SharePoint WSP solutions Refer to the product release notes for information on upgrading SharePoint WSP solutions. Maintaining Microsoft Windows Installer installations Use the information in this section to maintain EMC SourceOne software installed using Microsoft Windows Installer. Remove a component Repair a component To remove (uninstall) an Windows Installer-based EMC SourceOne product component that is installed on a Microsoft Windows system: 1. Access the Microsoft Windows Add or Remove Programs dialog box. 2. Select the appropriate component and click Remove. 3. Follow the prompts to remove the component. Repairing a component can fix missing or corrupt files, shortcuts, and registry entries. To repair an Windows Installer-based EMC SourceOne product component that is installed on a Microsoft Windows system: 1. Access the Microsoft Windows Add or Remove Programs dialog box. 2. Select the appropriate component and click Change. 3. Follow the prompts to repair the component. 32 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

33 3 Uninstalling Microsoft SharePoint RBS Support This chapter describes how to uninstall the required and optional components of EMC SourceOne for Microsoft RBS. This chapter is organized as follows: Uninstallation overview Uninstalling SharePoint RBS by using a command script Uninstalling SharePoint RBS by using the user interface Uninstalling Microsoft SharePoint RBS Support 33

34 Uninstalling Microsoft SharePoint RBS Support Uninstallation overview There are two ways by which you can uninstall Sharepoint Storage Management. They are as follows: Uninstalling SharePoint RBS by using a command script on page 35 Uninstalling SharePoint RBS by using the user interface on page 37 Prerequisites Ensure you review the following prerequisites before you uninstall: Accounts and permissions on page 13 Important considerations on page 34 Important considerations Once you have uninstalled the products, all the externalized BLOBs cannot be accessed by SharePoint. You must use the EMC SourceOne SharePoint RBS Provider Migration Service to migrate all the BLOBs into SharePoint content databases. 34 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

35 Uninstalling Microsoft SharePoint RBS Support Uninstalling SharePoint RBS by using a command script To uninstall SharePoint by using a command script, perform the following steps: 1. Go to Deactivate feature > uninstall feature > retract solution > delete solution. 2. For EMCES1.Administration.wsp, in the command prompt, type the following: stsadm -o deactivatefeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o deactivatefeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.AdminSiteElements\feature.xml -force stsadm -o retractsolution -name EMCES1.Administration.wsp -url AdminSiteUrl -immediate -force stsadm -o deletesolution -name EMCES1.Administration.wsp IISRESET /noforce Replace AdminSiteUrl with the Central Administration Site URL (For example, 3. For EMCES1.RBSProviderPremium.wsp, in the command prompt, type the following: stsadm -o deactivatefeature -filename EMCES1.RBSPremiumUI\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.RBSPremiumUI\feature.xml -force stsadm -o retractsolution -name EMCES1.RBSProviderPremium.wsp -url AdminSiteUrl -immediate -force stsadm -o deletesolution -name EMCES1.RBSProviderPremium.wsp IISRESET /noforce Uninstalling SharePoint RBS by using a command script 35

36 Uninstalling Microsoft SharePoint RBS Support Replace AdminSiteUrl with the Central Administration Site URL (For example, 4. For EMCES1.RBSProviderService.wsp, in the command prompt, type the following: stsadm -o retractsolution -name EMCES1.RBSProviderService.wsp -allcontenturls -immediate -force stsadm -o deletesolution -name EMCES1.RBSProviderService.wsp IISRESET /noforce 36 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

37 Uninstalling Microsoft SharePoint RBS Support Uninstalling SharePoint RBS by using the user interface To uninstall SharePoint RBS, go to All Programs > Microsoft SharePoint 2010 Products > SharePoint 2010 Central Administration, and Login via the SharePoint Service Account. To uninstall SharePoint RBS by using the user interface: 1. You must first Deactivate features. a. Go to Central Administration > System Settings > Manage farm features. b. Click Deactivate, to deactivate the SourceOne Archive Logging, EMC SourceOne Archive Search Configuration, and EMC SourceOne Instrumentation farm features Figure 7 Deactivating Farm Features 2. Run this script in command line to uninstall features: stsadm -o uninstallfeature -filename EMCES1.RBSPremiumUI\feature.xml -force 3. Go to Central Administration > System Settings > Manage farm solutions to retract solutions. The solutions list appears. Figure 8 Manage farm solutions For emces1.administration.wsp and emces1.rbsproviderpremium.wsp: a. Click either solution, the Solution Properties page appears. Click Retract Solution the Retract Solution page appears. Uninstalling SharePoint RBS by using the user interface 37

38 Uninstalling Microsoft SharePoint RBS Support Figure 9 Retracting Solutions b. On the Retract Solution page, specify when to retract the solution either Now or At a specified time. c. Specify a Web application to retract this solution from. In this case, choose the central administration URL, as shown in the figure above. d. Click OK. This may take a few seconds for the operation to complete. For emces1.rbsproviderservice.wsp: a. Click the solution, the Solution Properties page appears. Click Retract Solution, the Retract Solution page appears. 38 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide

39 Uninstalling Microsoft SharePoint RBS Support Figure 10 Retracting emces1.rbsproviderservice.wsp b. On the Retract Solution page, specify when to retract the solution either Now or At a specified time. c. Click OK. This may take a few seconds for the operation to complete. Uninstalling SharePoint RBS by using the user interface 39

40 Uninstalling Microsoft SharePoint RBS Support 4. The final step is to Delete the solutions. For emces1.administration.wsp, emces1.rbsproviderpremium.wsp and emces1.rbsproviderservice.wsp: a. Click the solution you want to delete, the Solution Properties page appears. Figure 11 Remove Solution b. A warning is displayed asking you whether you are sure you want to remove the solution you selected. Click OK. 40 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide