exacqvision Web Service User Manual (updated April 04, 2016)

Size: px
Start display at page:

Download "exacqvision Web Service User Manual (updated April 04, 2016)"

Transcription

1 exacqvision Web Service User Manual (updated April 04, 2016) Information in this document is subject to change without notice. Copyright , Exacq Technologies, Inc. All rights reserved. Exacq Technologies is a trademark of Exacq Technologies, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Exacq Technologies, Inc., disclaims any proprietary interest in trademarks and trade names other than its own. Exacq Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Exacq Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual. Exacq Technologies, Inc Exit Five Parkway, Bldg 3 Fishers, IN USA

2 Contents 1 OVERVIEW AND REQUIREMENTS... 3 CLIENT REQUIREMENTS... 4 CLIENT BANDWIDTH USAGE... 4 HARDWARE RECOMMENDATIONS INSTALLING AND CONFIGURING THE EXACQVISION WEB SERVICE... 6 SERVERS... 7 BASIC SERVICE CONFIGURATION... 9 EXTERNAL AUTHENTICATION CONFIGURATION ADMINISTRATION CONFIGURATION Changing Web Service Administrator Password Web Service Configuration Access Restriction CONFIGURING YOUR EXACQVISION SERVER WEB CLIENT CONNECTING TO AND CONFIGURING SYSTEMS CLIENT SETTINGS LIVE VIDEO VIEWING PTZ CONTROL VIEWS MAPS SOFT TRIGGERS CAMERA ASSOCIATIONS SEARCH AND PLAYBACK EXPORTING EXACQ REPLAY ACTIVE DIRECTORY SUPPORT FOR WEB SERVICE ACTIVE DIRECTORY IN WINDOWS-BASED WEB SERVICE ACTIVE DIRECTORY/LDAP IN LINUX-BASED WEB SERVICE Page 2 of 30

3 1 OVERVIEW AND REQUIREMENTS The exacqvision Web Service allows you to use a web browser to view live video, search and play back recorded video, and control pan/tilt/zoom functions on cameras connected to exacqvision servers. The Web Service connects to the exacqvision server as a client and transcodes captured video into JPEG files. The service then sends the JPEGs to the browser as fast as requested by the browser, or as fast as possible if the requested rate is too high for the connection. NOTE: The exacqvision Web Service is pre-installed on all exacqvision A Series and Z Series systems. It can also be installed on exacqvision ELX Series systems. (Do not install it on exacqvision EL Series systems.) The exacqvision Web Service works with browsers as shown in the following diagram: The exacqvision Web Service is normally run as an integrated system on an exacqvision Server. Alternatively, a distributed system with a dedicated web server can be used for higher-capacity systems. Video can be viewed on the local network by using a web browser, over the Internet using a web browser, or on a mobile device using a mobile browser or exacqvision application. Page 3 of 30

4 CLIENT REQUIREMENTS The Web Service client is supported on a wide variety of browsers and devices: Firefox 3.6 or later Internet Explorer 8 or later Safari 4.0 or later Opera 10.0 or later ios 4.2 or later Android 2.2 or late CLIENT BANDWIDTH USAGE The following table is an estimate of client bandwidth usage when streaming video to web browsers and mobile devices. Actual bandwidth will vary based on the composition of the camera scene and whether native h.264 streaming is enabled in both the web client and web service. Device Resolution (device) # cams in layout Quality FPS Frame size in KB (each cam) Bandwidth (Mb/s) Smartphone 960x Smartphone 960x Smartphone 960x Smartphone 960x Smartphone 960x ipad 1024x ipad 1024x ipad 1024x ipad 1024x ipad 1024x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x PC browser 1920x NOTES: The resolution of the camera is not relevant to the bandwidth. The Web Service resizes the image to fit the client device resolution. The resolution of the device has more impact on bandwidth than the number of cameras. For example, a four-camera layout that fills all pixels requires about 20 percent more bandwidth than a one-camera layout (not 400 percent as might be expected). Page 4 of 30

5 HARDWARE RECOMMENDATIONS The exacqvision Web Service uses a significant amount of computer resources to transcode video. Required resources increase in proportion to the number of simultaneous connections and the data rate of incoming video. Hardware upgrades might be necessary to support heavy Web Service workloads. Performance Processor RAM Example exacqvision NVR Minimum Intel Celeron 2GB exacqvision LC Recommended Intel i3 4GB exacqvision A-Series High performance Intel i7 8GB exacqvision Z-Series Page 5 of 30

6 2 INSTALLING AND CONFIGURING THE EXACQVISION WEB SERVICE The exacqvision Web Service must be enabled on a server before you can use it. To install exacqvision Web Service, download it from /support/downloads.html. Run the setup file while logged in as the administrator of the server. Follow the simple onscreen instructions to install Web Service. To start the Web Service, go to Start, Programs, exacqvision Web Service, and then Start exacqvision Web Service. It is recommended that you select Set exacqvision Web Service to Start Automatically from the Start Menu. To configure web service, you must open the Web Service browser on the localhost and enter the system hostname as the address. Click the Web Service Configuration link at the bottom-right corner of the page. Four sections are available on the configuration page: Page 6 of 30

7 SERVERS The Servers page allows you to add servers for viewing and searching of video Address - Enter the IP address of the exacqvision Server you will be connecting to. If the service is running on the exacqvision Server, enter Port - Enter the port used by the exacqvision Server. By default, the port is Passthrough - If you want to have an automatic login for web clients, select Passthrough. If you do not select this option, the system will require the users to enter a username and password. 4. Username - Username of account you d like the web service to use on behalf of a web client connection 5. Password - Password of the account 6. Timeout - Enter the number of seconds to try to connect to the server. 7. Power User Process - Enables the Web Service to log in to the exacqvision server using a special Power User account that is necessary for certain functions of the Web Service and Mobile applications, such as PUSH NOTIFICATIONS. 8. Username - Username of special Power User account 9. Password - Password of special Power User account 10. Add Server - Click Add Server to repeat to display a box for an additional server. 11. Discovered Servers - Displays a list of discovered exacqvision servers (available in exacqvision 7.6 or higher). 12. To import a XDV file containing a list of servers exported from the Add Systems page in exacqvision Client, browse to the.xdv file and click Import. This allows you to add a large number of servers simultaneously and quickly. See the exacqvision Client User Manual for more information about exporting a list. 13. Export - To export a list of servers configured on this page. 14. X - Delete a server 15. Update Configuration - Click Update Configuration to enable any changes. Page 7 of 30

8 Using the Discovered Servers button (Step 11) will display a list of discovered servers as shown in the example below. This is available in exacqvision 7.6 or higher. Click Add to add the server to Servers configuration and allow you to enter credentials and other information to complete the process. Page 8 of 30

9 BASIC SERVICE CONFIGURATION The Basic Service page allows you to configure logging, the Web Service port, and security Download the log file as desired. 2. Select the lowest level of information that you want to log. All messages equal or higher than the selected level will be logged: Error. Only catastrophic issues, such as a system crash, are logged. Warning. Warnings, such as server login failures, are also logged. Information. Every action that occurs in the Web Service is logged. Debug. This logs additional information that is normally useful only with the assistance of Exacq Technical Support. 3. Select the period of information included in each log file. 4. Select the number of log files to maintain before the oldest log file is deleted. 5. Web Service Port (80 by default). 6. WebSocket Port (8082 by default). Enabling this is required for native h.264 streaming. Port 8082 must be opened on any firewall that is also running on the machine. 7. Select Enable CSRF Protection to prevent Cross-Site Request Forgery attacks, unless it is necessary to disable it in your environment. 8. Click Update Configuration when finished. Page 9 of 30

10 EXTERNAL AUTHENTICATION CONFIGURATION There are two options for Authentication Type: None ESM None: Makes no changes to the way Web Service authenticates to exacqvision servers. Servers that have been configured in the Servers section will be available to anyone who logs in to this Web Service and has proper credentials for those servers, OR if those servers have been configured with Passthrough they will also be available to anyone ESM: If ESM is selected 1. Enter the URL of the ESM system 2. Enter the Admin account username for the ESM system 3. Enter the Admin account password for the ESM system. 4. Click Update Configuration Page 10 of 30

11 A user of this webservice will need to have an ESM account. When a user navigates to the webservice landing page using a browser a prompt for ESM credentials will be presented. Enter proper ESM credentials here and this web service session will be dynamically configured with the proper exacqvision servers and privileges for the user. Page 11 of 30

12 ADMINISTRATION CONFIGURATION The Administration Configuration page allows you to: Change the password for the Web Service administrator Enable or disable access to the configuration pages of Web Service from remote systems (systems other than localhost) Changing Web Service Administrator Password 1. Enter the username for the Web Service administrator. 2. Enter a new password for the Web Service administrator. 3. Re-type the new password for the Web Service administrator. Web Service Configuration Access Restriction 4. Select Enable Localhost Restriction to restrict access to the Web Service Configuration from a remote browser session. With this option enabled, only localhost or can access this Web Service configuration. If it is not checked this Web Service configuration page is accessible from the Web Service landing page of any user with Web Service access, local or remote. Unchecked Checked 5. Click Update Configuration when finished. Page 12 of 30

13 3 CONFIGURING YOUR EXACQVISION SERVER The Web Service logs into exacqvision server recording applications, even if Web Service is installed on that same server. If passthrough is enabled, all users will have live and search capability, and their access to cameras will be determined by their login account s privileges. If passthrough is not enabled, each user must have an account on the exacqvision server, and the privileges of that account are used to determine Web Service permissions. To add new users in exacqvision Client, log in as an administrator and complete the following steps: 1. click the Config (Setup) toolbar button. 2. Expand the server in the tree by clicking its node button. 3. Select Users from the expanded tree. 4. Click the New button. 5. The Username field is automatically filled with New User. 6. Type the name of the new user and then tab to the Password field and enter a new password. Select the Password Confirm field and retype the password. 7. Open the User Group drop-down list and select the type of access level for this user. See the exacqvision Client Users Manual for descriptions of each default group. 8. If desired, modify the user s permissions and privileges. NOTE: For more detailed instructions for using exacqvision Client, see the Users section of the exacqvision Users Manual or the context-sensitive online help file. To verify the configuration, open a web browser on the exacqvision Web Service computer, enter address , log in (if necessary), and confirm that video can be viewed from a connected camera a 8b Page 13 of 30

14 4 WEB CLIENT The web client provides many of the same features available in exacqvision Client. NOTE: Not all features in the web client are available to all users. Feature availability could vary based on the user s assigned permissions. CONNECTING TO AND CONFIGURING SYSTEMS When you first open the web client and you are not connected to any systems, the System page is displayed along with a list of all servers that were configured in the Web Service Configuration. To connect to a listed system, right click Not Connected and select Connect. Alternatively, you can click Connect All to connect to all listed systems. You can also modify the server configuration on the Edit Systems page: Click Edit Systems. 2. To select which systems are connected when you open the web client, select the checkboxes under Enabled. 3. You can configure the web client to log in to the server automatically using passthrough, to ask for login credentials, or to log in using specific credentials. Page 14 of 30

15 CLIENT SETTINGS These settings are for the web client configuration. 1. Click Client in the configuration tree 2. Enable Use Software Decoding for native h.264 support from the web service. (WebSocket port 8082 must also be enabled in the web service configuration. See pg 7 of this document) 3. If it is known that WebSockets will not or cannot be enabled on a network, a 5 second delay can be avoided by checking this box. Otherwise, the Web Client will try for 5 seconds to establish a WebSocket connection on port After 5 seconds, it will default to the legacy web client to server connection. Page 15 of 30

16 After you are successfully logged in and connected to a system, you can view the following pages: The System page allows you to view important system hardware information, change the system name, view licensing information, and copy the license number to the system clipboard. The Add IP Cameras page allows you to add IP cameras to the system: 1. Click New. 2. Enter all the information about the camera. 3. Click Apply. 4. Enable the camera by clicking its checkbox Page 16 of 30

17 The Users page allows you to add and delete users, configure a user s group access level, and assign permissions for viewing cameras. After a user has been added to the system, the user can log in and view live and recorded video according to the permissions assigned to them. 1. To add a user, click New. (To change the password/permissions for a user, select the username.) 2. Enter the name of the user. Enter or change the password in the Password/Confirm fields. 3. Select a permission level from the User Group drop-down list: Full Admin has access all features of the system. Power User has access all features except for adding or deleting users. Live Only can view live video from all connected cameras. Search Only can search for recorded video. Live + Search can view live video and search for recorded video from all connected cameras. any user or custom group whose permissions/privileges have been modified from a standard group listed above. NOTE: Custom groups are not available on exacqvision Start servers. 4. Assign a PTZ Priority level to the user (not available in exacqvision Start). When two users attempt to control the PTZ functions of the same camera simultaneously, the user with the higher priority level (up to 10) is granted PTZ control. If a second user attempts to control PTZ functions on a camera that is already being controlled by a user with the same priority, control remains with the first user. Admin users automatically have PTZ priority over any non-admin user, and Power Users have priority over all users except for Admin users. 5. The Custom User Permissions section allows you to select which devices the user or group can see and operate in the exacqvision Client. You might have to deselect View Admin and User Admin under Custom User Privileges (if available) to allow the Custom User Permissions data to be edited. 6. The Custom User Privileges section contains a list of privileges that can be assigned to a user. If you change the permissions/privileges for a user/group, enter a name for the new group and click Apply. 7. When finished, click Apply (under the Custom User Privileges section and not shown here) Page 17 of 30

18 The camera s Settings page allows you configure the camera s onscreen display (OSD): 1. Enter a name for the camera (up to 32 characters). 2. Select the position of the onscreen display (OSD) of the camera, along with the camera information included in the display. 3. Select a font and size of the OSD. 4. Select the color of the OSD, along with bold/italics options. 5. To enable changes of settings on this tab, click Apply. 6. To enable the settings on this tab to multiple cameras on the server, click Apply To Page 18 of 30

19 The Device page provides information about a hybrid system s analog capture card. In the tree, any cameras connected to the analog capture card are listed below the device: After at least one system is connected and its cameras are enabled, proceed to the Live page operation. for normal Page 19 of 30

20 LIVE VIDEO VIEWING To view a camera, simply drag it into the desired panel. Double-click a camera name to fill all the current layout panels, starting with the camera that was double-clicked Layout Buttons: These buttons load a video window layout and allow you to view multiple cameras simultaneously. 2. Size: Click plus [+] to increase the image size or minus [-] to decrease the size. 3. Quality: Click plus [+] to increase image quality or minus [-] to decrease it. The lower the number, the more pixilated the image appears, but frame rate could increase because of reduced network load. 4. Add Server: Click Add Server to display a drop-down list that contains all servers configured on the Web Service Configuration page. Select a server and click Add. 5. Cameras List: Drag any of these cameras into any panel to view live video from that camera. If you drag the server name into a window, as many cameras as possible from that server are displayed in the windows. Alternatively, double-click a camera name to display that camera in the first window, and the next cameras in the list in the remaining windows. 6. Video Windows: You can drag one video window to another video window to switch the images displayed. To remove a camera from a video window, right-click and select Disconnect Video. 7. Additional lists: You can open a list of Groups, Maps, and Views. 8. Soft Triggers Button: Click this button to open a list of configured triggers. 9. PTZ Control Button: Click this button to open the PTZ control window. 10. Hide/Show Side Nav Bar Button: Click this button to show or hide the tree lists on the left side of the screen. 11. FPS Indicator: This shows the number of frames being displayed per second. 12. Page buttons: Click these buttons to switch between Live view, Search view, and Config (Setup) view. Each button is available only to users with appropriate permissions, so not all buttons are shown to all users. Additional information about many of these features is available on the following pages. Page 20 of 30

21 PTZ CONTROL To control PTZ, choose one of the following options: Hover over the video window of a PTZ camera. The cursor turns into an arrow that indicates the direction of PTZ movement. Select this button in the toolbar at the top of the screen: The PTZ control window allows you to select presets, control PTZ, zoom in and out, and set the PTZ speed. Page 21 of 30

22 Right-click a video image and select Digital PTZ (available on all cameras) or PTZ Presets (on PTZ cameras only). On some cameras, a Fisheye option is also available on this menu. To zoom in and zoom out of a window without opening the PTZ control window, use the Page Up and Page Down buttons on the keyboard or the mouse wheel. VIEWS When you click the Views button, a list of camera views that are configured on the connected servers is displayed. Click a view name to open the cameras configured in the camera view. Page 22 of 30

23 MAPS When you click the Maps button, a list of maps that are configured on the connected servers is displayed. Click a map name to display it in a video window. You can also click on any of the icons in the map to display video associated with the icon. SOFT TRIGGERS When you click the Soft Triggers button, a window appears with a list of triggers that are configured on the connected servers. Select a trigger s checkbox to activate an alarm, and deselect it to deactivate the alarm. Page 23 of 30

24 CAMERA ASSOCIATIONS The web client can display camera associations which have been configured by the exacqvision client as shown here. Using a web client to view camera Video 101 will result in the soft trigger being displayed in a read-only fashion which means you cannot actuate it from the web client, but you can see its status. You can see camera associations for the following association types in the web client Live View. Soft Triggers (as shown below) Security Integrations Page 24 of 30

25 SEARCH AND PLAYBACK To search and play back video, complete the following steps: 1 1. Click the Search button. 2. Select one or more cameras by clicking their checkboxes. 3. Configure a search range by entering dates and selecting times. 4. Click Search. 5. Wait for the results appear under the timeline. The color-coded bars represent that continuous (green), motion (blue), or alarm (red) video has been recorded during the search range. 6. Select a camera to display the first frame from that camera. To select multiple cameras, hold down the Control key and select each of the desired cameras. 7. Click the play button. 8. Navigate the video using the slider (a) or the other VCR controls (b). 9. Click the left (a) or right (b) arrows to shift the video timeline earlier or later. Click the Zoom In (plus) or Zoom Out (minus) buttons next to the left and right arrows to decrease or increase the range of the video timeline b 8a 9b 9a Page 25 of 30

26 Thumbnail search mode allows you to visually scan for video from a single camera by viewing thumbnail images captured at specified intervals in a time range To perform a thumbnail search, complete the following steps: 1. Click the Thumbnail Search Mode button. 2. Select one camera from the camera selection tree. 3. Select a search range. 4. Click Search to display thumbnails of images captured at constant intervals during the search period. 5. The capture time of each thumbnail is represented on the timeline by vertical orange lines. 6. To display more or fewer thumbnails, select a video window layout. 7. To play video starting at a thumbnail image, either double-click the video window or click the play button under the image. If you immediately return to the Thumbnail Search Mode, the same thumbnails should be displayed. 8. To decrease the search range, click a Zoom In (plus) button in a video panel. To increase the search range, click a Zoom Out (minus) button in a video panel. NOTE: Each video panel has a Zoom In and Zoom Out button. The thumbnail associated with the selected button becomes the center point of the increased or decreased search range. Page 26 of 30

27 EXPORTING To save a still image, choose one of the following options: Right-click the video window, select Save Image, and follow the onscreen instructions. Or, click this button in the toolbar at the top of the screen: To export search results, choose one of the following options: To export the entire search result, click Quick Export. To export a segment of video, scrub to the start of the segment, right-click the video window or timeline, and select Mark Export Start. Then scrub to the end of the segment, right-click the video window or timeline, and select Mark Export End. Then either right-click and select Export and Download Video, or click this button: After you select an export option, select the file format from the drop-down list and click Export: EXE (a fully executable file), PS, or AVI (available only if the Web Service is running in Windows). Page 27 of 30

28 EXACQ REPLAY Exacq Replay lets you easily and conveniently replay video from Live View of a web client session. 1. Right click within the video pane 2. Select exacqreplay 3. Select Video or Layout 4. Select time duration (amount of time to be retrieved from current time) A playback window will be opened and begin playback of your selected clip length. Page 28 of 30

29 5 ACTIVE DIRECTORY SUPPORT FOR WEB SERVICE exacqvision Web Client and Exacq Mobile app users can use domain credentials to log in to exacqvision servers if the following are true: 1. The exacqvision server is configured to communicate with Active Directory (AD) or LDAP. 2. User permissions are mapped to AD or LDAP groups or users. 3. The server running the exacqvision Web Service is configured as part of the domain. Items 1 and 2, related to configuring the exacqvision server, are described in the AD guides for each platform available at To configure the exacqvision Web Service to communicate with AD in either Windows and Linux, see the instructions in the following sections. NOTES: When using domain credentials, the username should be specified as <username>@<domain>. You cannot configure an AD account as the stored passthrough account in the Web Service configuration. Only AD accounts can be used by installed client, web client and mobile app users. ACTIVE DIRECTORY IN WINDOWS-BASED WEB SERVICE When using Windows client computers and Windows domains, it is recommended that you configure your Active Directory (AD) server s IP address as one of your DNS servers. Then you should make sure the AD server s fully qualified host name resolves. If there are any DNS resolution issues, Windows login will require a large amount of time for processing, and it will ultimately fail. To join your Windows system to the AD domain, complete the following steps: 1. On the system s Desktop, right-click System and select Properties. 2. Select the Computer Name tab. 3. Click the Change button to join the domain. 4. Specify a unique computer name. (If you change the name, you must restart the system before continuing.) 5. Select Domain and enter the AD domain. 6. Enter an authorized domain username and password. 7. Restart the system. NOTE: When adding an exacqvision server with an Enterprise license configured on the AD domain, you cannot configure an AD account as passthrough. AD accounts must manually log in every time. Page 29 of 30

30 ACTIVE DIRECTORY/LDAP IN LINUX-BASED WEB SERVICE To configure your Linux system for Active Directory or OpenLDAP, complete the following steps: 1. Install Kerberos. KRB5 (MIT Kerberos V5) has specifically been tested for this purpose. Installing krb5-user and libkrb5-dev should also install krb5-config, which is valid for all Ubuntu types. 2. Configure the /etc/krb5.conf file. Add a stanza for the AD domain, and change the default realm to the AD domain. Fully qualified domain names (FQDN) for the KDC and admin server is preferred, in case the IP addresses will ever be changed (just make sure the FQDN resolves for the AD server). Make sure the AD domain name is upper-case; for example: [libdefaults] default_realm = EXACQ.TEST.COM [realms] EXACQ.TEST.COM = { kdc = adserver2008.exacq.test.com admin_server = adserver2008.exacq.test.com } 3. Note the AD domain, along with the FQDN and IP address of the AD server: EXACQ.TEST.COM adserver2008.exacq.test.com Use the kinit command to confirm that the Kerberos configuration works as intended. Try to obtain a ticket for the Kerberos login; you can verify success using the klist command. Use kdestroy to release the ticket when you have verified the configuration. NOTES When adding an exacqvision server with an Enterprise license configured on the AD domain, you cannot configure an AD account as passthrough. AD accounts must manually log in every time. For each exacqvision server you intend to connect to with a user principal instead of an exacqvision user name, you must add the exacqvision server s FQDN to your /etc/hosts file, and it must be the first name listed for that IP address. Otherwise, you will receive Kerberos failures. Page 30 of 30

exacqvision Web Service User Manual (updated December 15, 2014)

exacqvision Web Service User Manual (updated December 15, 2014) exacqvision Web Service User Manual (updated December 15, 2014) Information in this document is subject to change without notice. Copyright 2008-2014, Exacq Technologies, Inc. All rights reserved. Exacq

More information

User Manual. (updated December 15, 2014) Information in this document is subject to change without notice.

User Manual. (updated December 15, 2014) Information in this document is subject to change without notice. User Manual (updated December 15, 2014) Information in this document is subject to change without notice. Copyright 2013-2014, Exacq Technologies, Inc. All rights reserved. Exacq Technologies is a trademark

More information

exacqvision Web Server Quick start Guide

exacqvision Web Server Quick start Guide exacqvision Web Server Quick start Guide 11955 Exit 5 Pkwy Building 3 Fishers, IN 46037-7939 USA +1.317.845.5710 phone +1.317.845.5720 fax 1 Basic Installation The exacqvision Web Server works with browsers

More information

The following process allows you to configure exacqvision permissions and privileges for accounts that exist on an Active Directory server:

The following process allows you to configure exacqvision permissions and privileges for accounts that exist on an Active Directory server: Ubuntu Linux Server & Client and Active Directory 1 Configuration The following process allows you to configure exacqvision permissions and privileges for accounts that exist on an Active Directory server:

More information

User Manual. (Updated September 9, 2015) Information in this document is subject to change without notice.

User Manual. (Updated September 9, 2015) Information in this document is subject to change without notice. User Manual (Updated September 9, 2015) Information in this document is subject to change without notice. Copyright 2013-2015, Exacq Technologies, Inc. All rights reserved. Exacq Technologies is a trademark

More information

AXIS Camera Station Quick Installation Guide

AXIS Camera Station Quick Installation Guide AXIS Camera Station Quick Installation Guide Copyright Axis Communications AB April 2005 Rev. 3.5 Part Number 23997 1 Table of Contents Regulatory Information.................................. 3 AXIS Camera

More information

Central Management Software CV3-M1024

Central Management Software CV3-M1024 Table of Contents Chapter 1. User Interface Overview...5 Chapter 2. Installation...6 2.1 Beginning Installation...6 2.2 Starting the CMS software...10 2.3 Starting it from the Start menu...10 2.4 Starting

More information

How To Set Up Flir Cloud Client For Pc Or Mac Or Mac (For Pc Or Ipad) On A Pc Or Pc Or Mouse (For Mac) On An Iphone Or Ipa) On Pc Or Tv (For Ipa

How To Set Up Flir Cloud Client For Pc Or Mac Or Mac (For Pc Or Ipad) On A Pc Or Pc Or Mouse (For Mac) On An Iphone Or Ipa) On Pc Or Tv (For Ipa Instruction Manual FLIR Cloud Services Client Instruction Manual FLIR Cloud Services Client #LX400018; r. 2.0/14567/14568; en-us iii Table of contents 1 Setting up FLIR Cloud Client for PC or Mac...1

More information

Digital Sentry DS ControlPoint

Digital Sentry DS ControlPoint O P E R A T I O N Digital Sentry DS ControlPoint C3674M-I (5/11) 2 C3674M-I (5/11) C3674M-I (5/11) 3 Contents Description...........................................................................................................

More information

Avigilon Control Center Web Client User Guide

Avigilon Control Center Web Client User Guide Avigilon Control Center Web Client User Guide Version: 4.12 Enterprise OLH-WEBCLIENT-E-E-Rev2 Copyright 2013 Avigilon. All rights reserved. The information presented is subject to change without notice.

More information

RSM Web Gateway RSM Web Client INSTALLATION AND ADMINISTRATION GUIDE

RSM Web Gateway RSM Web Client INSTALLATION AND ADMINISTRATION GUIDE RSM Web Gateway RSM Web Client INSTALLATION AND ADMINISTRATION GUIDE Installation and Administration Guide RSM Web Client and RSM Web Gateway 17 August, 2004 Page 1 Copyright Notice 2004 Sony Corporation.

More information

Avigilon View User Guide

Avigilon View User Guide Avigilon View User Guide Legal Notices 2014 Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any copyright, industrial design, trademark,

More information

NVMS-1200. User Manual

NVMS-1200. User Manual NVMS-1200 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Install and Uninstall... 1 1.2.1 Install the Software... 1 2 Login Software... 3 2.1 Login... 3 2.2 Control Panel Instruction...

More information

ACS CLIENT SOFTWARE USER MANUAL

ACS CLIENT SOFTWARE USER MANUAL ACS CLIENT SOFTWARE USER MANUAL 1 ACS USER GUIDE 1.1 System Requirement Recommended System Requirement OS CPU VGA RAM HDD WindowXP, Vista Pentium 4, 2Ghz 1024*768, 64MB 24bit color graphic card 1GB 20MB

More information

MDMS Multiple Device Monitor System v1.0 User Manual

MDMS Multiple Device Monitor System v1.0 User Manual MDMS Multiple Device Monitor System v1.0 User Manual Copyright 2014 All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever,

More information

CMS-DH CENTRAL MANAGEMENT SOFTWARE

CMS-DH CENTRAL MANAGEMENT SOFTWARE CMS-DH CENTRAL MANAGEMENT SOFTWARE CMS-DH is a central management software that allows you to view and manage up to 300 DH200 series DVRs. System Requirements Your system must meet the system requirements

More information

User Manual. (Updated April 08, 2016) Information in this document is subject to change without notice.

User Manual. (Updated April 08, 2016) Information in this document is subject to change without notice. User Manual (Updated April 08, 2016) Information in this document is subject to change without notice. Copyright 2013-2016, Exacq Technologies, Inc. All rights reserved. Exacq Technologies is a trademark

More information

Multi-Site 4200. Remote Viewing Software. User Guide

Multi-Site 4200. Remote Viewing Software. User Guide Multi-Site 4200 Remote Viewing Software User Guide Document 800-12064V1 Rev A 09/2012 User Guide Revisions Issue Date Revisions A 07/2012 New document. V1 Rev A 09/2012 Updated the description of the

More information

NVMS - 1000 USER MANUAL. Version 2.1.0

NVMS - 1000 USER MANUAL. Version 2.1.0 NVMS - 1000 USER MANUAL Version 2.1.0 Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall

More information

VMS A1 Client Software. User Manual (V2.0)

VMS A1 Client Software. User Manual (V2.0) VMS A1 Client Software User Manual (V2.0) Contents Chapter 1 Overview...4 1.1 Description...4 1.2 Running Environment...4 1.3 Function Modules...5 Chapter 2 Live View...7 2.1 User Registration and Login...7

More information

1 Introduction. Ubuntu Linux Server & Client and Active Directory. www.exacq.com Page 1 of 14

1 Introduction. Ubuntu Linux Server & Client and Active Directory. www.exacq.com Page 1 of 14 Ubuntu Linux Server & Client and Active Directory 1 Introduction For an organization using Active Directory (AD) for user management of information technology services, integrating exacqvision into the

More information

Manual Client Management Software HDR50-CMS

Manual Client Management Software HDR50-CMS Manual Client Management Software HDR50-CMS HDR50-CMS (Client Management Software) A-1. Install HDR50-CMS for Windows PC HDR50-CMS is a program for communication between DVR and PC to control signal and

More information

Intel Unite Solution. Standalone User Guide

Intel Unite Solution. Standalone User Guide Intel Unite Solution Standalone User Guide Legal Disclaimers & Copyrights All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel

More information

Professional Surveillance System User s Manual

Professional Surveillance System User s Manual Professional Surveillance System User s Manual \ 1 Content Welcome...4 1 Feature...5 2 Installation...6 2.1 Environment...6 2.2 Installation...6 2.3 Un-installation...8 3 Main Window...9 3.1 Interface...9

More information

How To Use The Workstation Program On A Pc Or Mac Or Macbook Or Macintosh (Aero) With A Computer Or Ipa (A2) With An Ipa Or Ipad (A3) With The Powerpoint 2.

How To Use The Workstation Program On A Pc Or Mac Or Macbook Or Macintosh (Aero) With A Computer Or Ipa (A2) With An Ipa Or Ipad (A3) With The Powerpoint 2. Mirasys NVR 6.1 User s Guide CONTENTS Contents... 2 Before you start... 3 Introduction... 6 Logging in... 9 User interface... 13 Navigator... 16 Cameras... 25 Video outputs... 41 Digital outputs... 46

More information

Network Video Recorder. User Manual (updated September 17, 2012)

Network Video Recorder. User Manual (updated September 17, 2012) Network Video Recorder User Manual (updated September 17, 2012) Information in this document is subject to change without notice. Copyright 2006-2012, Exacq Technologies, Inc. All rights reserved. Exacq

More information

LogMeIn Network Console Version 8 Getting Started Guide

LogMeIn Network Console Version 8 Getting Started Guide LogMeIn Network Console Version 8 Getting Started Guide April 2007 1. About the Network Console... 2 2. User Interface...2 3. Quick Start... 2 4. Network & Subnet Scans...3 5. Quick Connect...3 6. Operations...

More information

CMS Basic User s Manual

CMS Basic User s Manual CMS Basic User s Manual Central Management Solution For Multi-sites Applications V1.0.0 2 CMS Basic User s Manual Table of Contents User Interface Overview... 4 CMS UI Overview... 4 Installation... 6 Begin

More information

ivms-4200 Client Software Quick Start Guide

ivms-4200 Client Software Quick Start Guide ivms-4200 Client Software Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION. HIKVISION disclaims

More information

PowerVideo Plus. EverFocus Central Management Software. for Networked Video Devices Management. User s Manual

PowerVideo Plus. EverFocus Central Management Software. for Networked Video Devices Management. User s Manual EverFocus Central Management Software for Networked Video Devices Management User s Manual Copyright EverFocus Electronics Corp. Release Date: January, 2013 Copyright 2012 EverFocus Electronics Corp. All

More information

Media Server Installation & Administration Guide

Media Server Installation & Administration Guide Media Server Installation & Administration Guide Smarter Surveillance for a Safer World On-Net Surveillance Systems, Inc. One Blue Hill Plaza, 7 th Floor, PO Box 1555 Pearl River, NY 10965 Phone: (845)

More information

SeeTec ExpansionPackage

SeeTec ExpansionPackage SeeTec ExpansionPackage Contents Contents 1 SeeTec WebClient...1 1.1 System requirements... 2 1.1.1 Server requirements for Apache HTTP Server, SeeTec TranscodingEngine (STE) and SeeTec ApplicationGateway

More information

Ocularis Media Server Installation & Administration Guide

Ocularis Media Server Installation & Administration Guide Ocularis Media Server Installation & Administration Guide 2013 On-Net Surveillance Systems Inc. On-Net Surveillance Systems, Inc. One Blue Hill Plaza, 7 th Floor, PO Box 1555 Pearl River, NY 10965 Phone:

More information

User Manual V1.0. Remote Software

User Manual V1.0. Remote Software User Manual V1.0 Notice: The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change

More information

LOREX CLIENT Remote Software 4.0

LOREX CLIENT Remote Software 4.0 LOREX CLIENT Remote Software 4.0 Instruction Manual English Version 2.0 MODEL: L20WD800 Series www.lorexcctv.com Copyright 2008 LOREX Technology Inc. Table of Contents Table of Contents Software Installation...

More information

Avalanche Remote Control User Guide. Version 4.1.3

Avalanche Remote Control User Guide. Version 4.1.3 Avalanche Remote Control User Guide Version 4.1.3 ii Copyright 2012 by Wavelink Corporation. All rights reserved. Wavelink Corporation 10808 South River Front Parkway, Suite 200 South Jordan, Utah 84095

More information

Axxon Monitor. User Manual

Axxon Monitor. User Manual Axxon Monitor by DComplex LLC User Manual This document has the latest documentation about the Axxon Monitor, iphone/ipad app by DComplex LLC, for monitoring Axxon Intellect Video Management System. Download

More information

Network Video Recorder. User Manual (updated May 12, 2011)

Network Video Recorder. User Manual (updated May 12, 2011) Network Video Recorder User Manual (updated May 12, 2011) Information in this document is subject to change without notice. Copyright 2006-2011, Exacq Technologies, Inc. All rights reserved. Exacq Technologies

More information

Ocularis Web User Guide

Ocularis Web User Guide Ocularis Web User Guide Contents Ocularis Web User Guide Contents LEGAL NOTICE... 3 INTRODUCTION... 4 OCULARIS MEDIA SERVER... 4 Ocularis Media Server Components... 4 Specifications... 4 Ocularis Web...

More information

With the purchase of ONSSI NetDVMS you have chosen an extremely powerful and intelligent surveillance solution.

With the purchase of ONSSI NetDVMS you have chosen an extremely powerful and intelligent surveillance solution. Dear ONSSI Customer, With the purchase of ONSSI NetDVMS you have chosen an extremely powerful and intelligent surveillance solution. This Getting Started Administrator Guide will explain how to install

More information

Appendix A. CMS(Client Management Software)

Appendix A. CMS(Client Management Software) Appendix A. CMS(Client Management Software) A-1. Install CMS for Windows PC CMS is a program for communication between DVR and PC to control signal and video. Insert the enclosed CD, and go to CD-ROM Drive

More information

ImagineWorldClient Client Management Software. User s Manual. (Revision-2)

ImagineWorldClient Client Management Software. User s Manual. (Revision-2) ImagineWorldClient Client Management Software User s Manual (Revision-2) (888) 379-2666 US Toll Free (905) 336-9665 Phone (905) 336-9662 Fax www.videotransmitters.com 1 Contents 1. CMS SOFTWARE FEATURES...4

More information

HRG App for Android Devices. User Guide

HRG App for Android Devices. User Guide HRG App for Android Devices User Guide Document 800-12218 Rev A 07/2012 Revisions Issue Date Revisions A 07/2012 New document. Contents 3 Contents 1 1 Introduction...............................................

More information

formerly Help Desk Authority 9.1.3 Upgrade Guide

formerly Help Desk Authority 9.1.3 Upgrade Guide formerly Help Desk Authority 9.1.3 Upgrade Guide 2 Contacting Quest Software Email: Mail: Web site: info@quest.com Quest Software, Inc. World Headquarters 5 Polaris Way Aliso Viejo, CA 92656 USA www.quest.com

More information

Network Video Recorder. User Manual (updated May 12, 2011)

Network Video Recorder. User Manual (updated May 12, 2011) Network Video Recorder User Manual (updated May 12, 2011) Information in this document is subject to change without notice. Copyright 2006-2011, Exacq Technologies, Inc. All rights reserved. Exacq Technologies

More information

idisplay v.2.0 User Guide

idisplay v.2.0 User Guide idisplay v.2.0 User Guide 2013 i3 International Inc. The contents of this user manual are protected under copyright and computer program laws. www.i3international.com 1.866.840.0004 CANADA 780 Birchmount

More information

Quick Help Guide (via SRX-Pro Remote)

Quick Help Guide (via SRX-Pro Remote) Quick Help Guide (via SRX-Pro Remote) 2012 i³ International Inc. The contents of this user manual are protected under copyright and computer program laws. Page 2 SRX-Pro Remote - Quick Help Guide Logging

More information

Ver. 4.10 USERS MANUAL

Ver. 4.10 USERS MANUAL Ver. 4.10 USERS MANUAL First Edition Riteapprove SE User Document v4.10 Copyright 2010 by S. Ten Nines California LLC. All rights reserved. No part of this guide may be reproduced in any way or by any

More information

Setting Up groov Mobile Apps. Introduction. Setting Up groov Mobile Apps. Using the ios Mobile App

Setting Up groov Mobile Apps. Introduction. Setting Up groov Mobile Apps. Using the ios Mobile App Introduction Using the ios Mobile App Opto 22 s free groov View apps for ios and Android allow you to use View for one or more groovs on your smartphone or tablet in full-screen mode without the address

More information

Central Management System (CMS) USER MANUAL

Central Management System (CMS) USER MANUAL Central Management System (CMS) USER MANUAL LEGAL INFORMATION Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission

More information

KViewCenter Software User Manual 2012 / 04 / 20 Version 2.2.1.0

KViewCenter Software User Manual 2012 / 04 / 20 Version 2.2.1.0 KViewCenter Software User Manual 2012 / 04 / 20 Version 2.2.1.0 Table of Contents Chapter 1. KViewCenter Interface... 5 1.1. Log in.... 5 1.2. Log out... 5 1.3. Control Panel... 6 1.4. Control Panel (Preview

More information

How To Use Senior Systems Cloud Services

How To Use Senior Systems Cloud Services Senior Systems Cloud Services In this guide... Senior Systems Cloud Services 1 Cloud Services User Guide 2 Working In Your Cloud Environment 3 Cloud Profile Management Tool 6 How To Save Files 8 How To

More information

ivms-5200 Professional Web Manager User Manual

ivms-5200 Professional Web Manager User Manual ivms-5200 Professional Web Manager User Manual UD.6L0202D1651A01 Hikvision ivms-5200 Professional Web Manager User Manual This manual, as well as the software described in it, is furnished under license

More information

SMS (Server Management Software) Digital Video Recorder. User s Manual

SMS (Server Management Software) Digital Video Recorder. User s Manual SMS (Server Management Software) Digital Video Recorder User s Manual 1 Table of Contents Chapter 1 Overview.....03 1.1 In This Manual..03 1.2 Overview 03 1.3 SMS Features...03 1.4 Product Information..03

More information

User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream

User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner

More information

AXIS Camera Station User s Manual

AXIS Camera Station User s Manual AXIS Camera Station User s Manual AXIS Camera Station User s Manual 1 Regulatory Information About This Document This manual is intended for administrators and operators of AXIS Camera Station and is applicable

More information

User Guide. Cloud Gateway Software Device

User Guide. Cloud Gateway Software Device User Guide Cloud Gateway Software Device This document is designed to provide information about the first time configuration and administrator use of the Cloud Gateway (web filtering device software).

More information

SMS Remote Software User Manual. Pro Series & Contender Series DVRs

SMS Remote Software User Manual. Pro Series & Contender Series DVRs SMS Remote Software User Manual Pro Series & Contender Series DVRs Table of Contents Chapter 1 Overview 1 1.1 In This Manual 1 1.2 Overview 1 1.3 SMS Features 1 1.4 Product Information 1 1.5 System Requirements

More information

SwannView Link for Android

SwannView Link for Android SwannView Link for Android Have a Smartphone or Tablet? With the free SwannView Link app, you can turn your Android mobile device into a monitoring centre for your DVR or NVR security system. Have the

More information

Citrix EdgeSight for Load Testing User s Guide. Citrix EdgeSight for Load Testing 3.8

Citrix EdgeSight for Load Testing User s Guide. Citrix EdgeSight for Load Testing 3.8 Citrix EdgeSight for Load Testing User s Guide Citrix EdgeSight for Load Testing 3.8 Copyright Use of the product documented in this guide is subject to your prior acceptance of the End User License Agreement.

More information

1. Central Monitoring System Software

1. Central Monitoring System Software 1. Central Monitoring System Software 1-1. General information CMS program is an application with which users not only watch and control remote DVRs, but also receive video/audio data or alarm signals

More information

BlackHawk for MAC Software User Guide

BlackHawk for MAC Software User Guide BlackHawk for MAC Software User Guide Products: BLK-DH2 Series and BLK-HD Series DVRs Please read this manual before using your software, and always follow the instructions for safety and proper use. Save

More information

Quick Start Guide. Plug n Play NVR DS-7604NI-E1/4P DS-7608NI-E2/8P. www.hikvision.com/en/us

Quick Start Guide. Plug n Play NVR DS-7604NI-E1/4P DS-7608NI-E2/8P. www.hikvision.com/en/us Quick Start Guide Plug n Play NVR DS-7604NI-E1/4P DS-7608NI-E2/8P Note: For more information refer to the complete User Manual located on the CD-ROM OVERVIEW 1. Overview 2. Main Menu Layout 3. Formatting

More information

Network Viewing Software User and Administrators Guide

Network Viewing Software User and Administrators Guide Network Viewing Software User and Administrators Guide Contents Contents...2 Introduction...3 System requirements...3 Connecting through a firewall....3 Connecting using a proxy server....3 Using Network

More information

Quick Start Guide NVR DS-7104NI-SL/W NVR. www.hikvision.com. First Choice For Security Professionals

Quick Start Guide NVR DS-7104NI-SL/W NVR. www.hikvision.com. First Choice For Security Professionals Quick Start Guide NVR DS-7104NI-SL/W NVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.com Quick Start 1.

More information

How To Use A Pew V.V.V (Windows) V.A.1.1 (Windows 8) (Windows 7) (Powerpoint) (For Windows) (Win Xp) (V.A) (Amd)

How To Use A Pew V.V.V (Windows) V.A.1.1 (Windows 8) (Windows 7) (Powerpoint) (For Windows) (Win Xp) (V.A) (Amd) VIDEO VIEWER USER MANUAL Please read instructions thoroughly before operation and retain it for future reference. Video_viewer_V1.0 LEGAL INFORMATION Reproduction, transfer, distribution or storage of

More information

IP Surveillance System. User s manual

IP Surveillance System. User s manual IP Surveillance System User s manual IP Surveillance system Table of Contents TABLE OF CONTENTS TABLE OF CONTENTS...1 SYSTEM REQUIREMENT...3 INSTALLATION...4 1. MAIN CONSOLE...12 1.1 Start...14 1.2 Information

More information

ivms-4200 Client Software User Manual (V2.0.0)

ivms-4200 Client Software User Manual (V2.0.0) ivms-4200 Client Software User Manual (V2.0.0) UD.6L0201D1034A01 Contents Chapter 1 Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 1.3 Function Modules... 3 1.4 Updates Instruction...

More information

IP Camera Centralization Management. Client Application. (IPCMonitor) Feb, 2013 Version 1.9. User Manual

IP Camera Centralization Management. Client Application. (IPCMonitor) Feb, 2013 Version 1.9. User Manual IP Camera Centralization Management Client Application (IPCMonitor) Feb, 2013 Version 1.9 User Manual INDEX 1 Introduction...3 2 Computer Requirement...3 3 Installation...4 4 Devices list...4 4.1 Adding

More information

Getting Started with Vision 6

Getting Started with Vision 6 Getting Started with Vision 6 Version 6.9 Notice Copyright 1981-2009 Netop Business Solutions A/S. All Rights Reserved. Portions used under license from third parties. Please send any comments to: Netop

More information

Contents. Introduction 3. Installation 4

Contents. Introduction 3. Installation 4 VMS User Manual Contents Introduction 3 Installation 4 Minimum Recommended Requirements 4 Login 4 Main Window 5 Menu Items 5 Toolbar Items 6 Play Bar Items 7 Configuration 8 Add network cameras/ digital

More information

ENR-2000 Series. User s Manual. For V4.00.02 Firmware 2014/01/29

ENR-2000 Series. User s Manual. For V4.00.02 Firmware 2014/01/29 ENR-2000 Series User s Manual For V4.00.02 Firmware 2014/01/29 Legal Notice Disclaimer The information contained in this document is intended for general information purposes. ACTi Corporation shall not

More information

Infinity Web Viewer Reference Guide

Infinity Web Viewer Reference Guide Infinity Web Viewer Reference Guide Table of Contents Overview... 1 Security Considerations... 1 System Setup... 1 Infinity Configuration... 1 Workstation Prerequisites... 2 Configuring Internet Security...

More information

1. Central Monitoring System Software

1. Central Monitoring System Software 1. Central Monitoring System Software 1-1. General information CMS program is an application with which users not only watch and control remote DVRs, but also receive video/audio data or alarm signals

More information

How To Use Hvs Pc Client Software On A Pc Or Mac Or Ipa (For Acedo) With A Tvc (For Mac) Or Ipc (Fordee) (For An Ipc) (Powerbook) (Windows

How To Use Hvs Pc Client Software On A Pc Or Mac Or Ipa (For Acedo) With A Tvc (For Mac) Or Ipc (Fordee) (For An Ipc) (Powerbook) (Windows Hills Video Security CCTV PC Client User Manual V1.1 Contents Chapter 1 Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 1.3 Function Modules... 4 1.4 Updates Instruction... 6 Chapter 2

More information

NETWORK PRINT MONITOR User Guide

NETWORK PRINT MONITOR User Guide NETWORK PRINT MONITOR User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable

More information

Q-Cam Professional V 1.1 User Manual

Q-Cam Professional V 1.1 User Manual Q-Cam Professional V 1.1 User Manual Introduction QCam Professional is a remote monitoring application designed primarily for the remote monitoring and auxiliary control of IP video cameras. It allows

More information

Live Maps. for System Center Operations Manager 2007 R2 v6.2.1. Installation Guide

Live Maps. for System Center Operations Manager 2007 R2 v6.2.1. Installation Guide Live Maps for System Center Operations Manager 2007 R2 v6.2.1 Installation Guide CONTENTS Contents... 2 Introduction... 4 About This Guide... 4 Supported Products... 4 Understanding Live Maps... 4 Live

More information

Rebasoft Auditor Quick Start Guide

Rebasoft Auditor Quick Start Guide Copyright Rebasoft Limited: 2009-2011 1 Release 2.1, Rev. 1 Copyright Notice Copyright 2009-2011 Rebasoft Ltd. All rights reserved. REBASOFT Software, the Rebasoft logo, Rebasoft Auditor are registered

More information

Advanced Configuration Steps

Advanced Configuration Steps Advanced Configuration Steps After you have downloaded a trial, you can perform the following from the Setup menu in the MaaS360 portal: Configure additional services Configure device enrollment settings

More information

BaseManager & BACnet Manager VM Server Configuration Guide

BaseManager & BACnet Manager VM Server Configuration Guide BaseManager & BACnet Manager VM Server Configuration Guide For Self-Hosted BaseManager & BACnet Manager Servers Deployed as Virtual Machines August 27, 2015 Customer Service 1-866-294-5847 i Baseline Inc.

More information

TVI End User Guide. Version: Summer 2009 Release

TVI End User Guide. Version: Summer 2009 Release TVI End User Guide Version: Summer 2009 Release Table of Contents Control Center for Windows...2 TVI Control Center for Windows XP/Vista...2 Features...2 System Requirements...3 Installing Control Center...3

More information

Install FileZilla Client. Connecting to an FTP server

Install FileZilla Client. Connecting to an FTP server Install FileZilla Client Secure FTP is Middle Georgia State College s supported sftp client for accessing your Web folder on Webdav howeve you may use FileZilla or other FTP clients so long as they support

More information

ReadyNAS Surveillance

ReadyNAS Surveillance ReadyNAS Surveillance Add-on Manual Firmware: RAIDiator 4.2.17 or later 350 East Plumeria Drive San Jose, CA 95134 USA May 2012 202-11009-01 2012 NETGEAR, Inc. All rights reserved No part of this publication

More information

1. Central Monitoring System Software

1. Central Monitoring System Software 1. Central Monitoring System Software 1-1. General information CMS program is an application with which users not only watch and control remote DVRs, but also receive video/audio data or alarm signals

More information

Device LinkUP + Desktop LP Guide RDP

Device LinkUP + Desktop LP Guide RDP Device LinkUP + Desktop LP Guide RDP Version 2.1 January 2016 Copyright 2015 iwebgate. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

More information

User Manual (V1.03) UD.6L0201D1056A01

User Manual (V1.03) UD.6L0201D1056A01 ivms-4200 PCNVR User Manual (V1.03) UD.6L0201D1056A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual applies to ivms-4200

More information

User Manual ivms-4200 Client Software. Version 1.02

User Manual ivms-4200 Client Software. Version 1.02 User Manual ivms-4200 Client Software Version 1.02 TABLE OF CONTENTS Chapter 1. Overview... 3 Chapter 2. Starting ivms-4200... 3 2.1 User Registration... 3 2.2 Wizard for Importing Device... 3 2.3 User

More information

MAC CMS User Manual 1

MAC CMS User Manual 1 1 TABLE OF CONTENTS Chapter 1. Overview... 4 Chapter 2. Starting CMS Client... 4 2.1 User Registration... 4 2.2 Wizard for Importing Device... 4 2.3 User Login... 9 2.4 Control Panel and Main Menu Bar

More information

IIS, FTP Server and Windows

IIS, FTP Server and Windows IIS, FTP Server and Windows The Objective: To setup, configure and test FTP server. Requirement: Any version of the Windows 2000 Server. FTP Windows s component. Internet Information Services, IIS. Steps:

More information

DIGICLIENT 8.0 Remote Agent Software

DIGICLIENT 8.0 Remote Agent Software DIGICLIENT 8.0 Remote Agent Software MODEL: D17800 Series Instruction Manual English Version 1.0 Copyright 2007 Digimerge Technologies Inc Table of Contents Table of Contents About the DigiClient 8.0...

More information

Upgrading from Call Center Reporting to Reporting for Contact Center. BCM Contact Center

Upgrading from Call Center Reporting to Reporting for Contact Center. BCM Contact Center Upgrading from Call Center Reporting to Reporting for Contact Center BCM Contact Center Document Number: NN40010-400 Document Status: Standard Document Version: 02.00 Date: June 2006 Copyright Nortel Networks

More information

Lenovo Online Data Backup User Guide Version 1.8.14

Lenovo Online Data Backup User Guide Version 1.8.14 Lenovo Online Data Backup User Guide Version 1.8.14 Contents Chapter 1: Installing Lenovo Online Data Backup...5 Downloading the Lenovo Online Data Backup Client...5 Installing the Lenovo Online Data

More information

Supporting Apple ios Devices

Supporting Apple ios Devices Supporting Apple ios Devices 2016 Bomgar Corporation. All rights reserved worldwide. BOMGAR and the BOMGAR logo are trademarks of Bomgar Corporation; other trademarks shown are the property of their respective

More information

Server Installation Guide ZENworks Patch Management 6.4 SP2

Server Installation Guide ZENworks Patch Management 6.4 SP2 Server Installation Guide ZENworks Patch Management 6.4 SP2 02_016N 6.4SP2 Server Installation Guide - 2 - Notices Version Information ZENworks Patch Management Server Installation Guide - ZENworks Patch

More information

IEI emerge and Milestone Systems Network Video Recorder. Setup and Integration Guide. Milestone Version 6.5 and emerge Version 3.

IEI emerge and Milestone Systems Network Video Recorder. Setup and Integration Guide. Milestone Version 6.5 and emerge Version 3. IEI emerge and Milestone Systems Network Video Recorder Setup and Integration Guide Milestone Version 6.5 and emerge Version 3.2 and above CONTENTS Requirements for Milestone NVR/IEI emerge Integration...

More information

This document is aimed at users of the Milestone XProtect Professional s Monitor application, including users of the Monitor application s Viewer.

This document is aimed at users of the Milestone XProtect Professional s Monitor application, including users of the Monitor application s Viewer. milestone XProtect Professional 4.6 Monitor & Viewer User s Manual Target Audience for this Document This document is aimed at users of the Milestone XProtect Professional s Monitor application, including

More information

Installation Guide. Novell Storage Manager 3.1.1 for Active Directory. Novell Storage Manager 3.1.1 for Active Directory Installation Guide

Installation Guide. Novell Storage Manager 3.1.1 for Active Directory. Novell Storage Manager 3.1.1 for Active Directory Installation Guide Novell Storage Manager 3.1.1 for Active Directory Installation Guide www.novell.com/documentation Installation Guide Novell Storage Manager 3.1.1 for Active Directory October 17, 2013 Legal Notices Condrey

More information

ivms-4200 Client Software User Manual Version 1.02

ivms-4200 Client Software User Manual Version 1.02 ivms-4200 Client Software User Manual Version 1.02 Contents Chapter 1. Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 Chapter 2. Starting ivms-4200... 4 2.1 User Registration... 4 2.2

More information

ivms-4200 Client Software Quick Start Guide V1.02

ivms-4200 Client Software Quick Start Guide V1.02 ivms-4200 Client Software Quick Start Guide V1.02 Contents 1 Description... 2 1.1 Running Environment... 2 1.2 Surveillance System Architecture with an Performance of ivms-4200... 3 2 Starting ivms-4200...

More information