Lecture forum. Optical System Design - New Features in WinLens TM 3D. Hier klicken, um Master-Titelformat zu bearbeiten InnovationPoint
|
|
|
- Harry Christian King
- 9 years ago
- Views:
Transcription
1 Lecture forum InnovationPoint Optical System Design - New Features in WinLens TM 3D Christoph GERHARD Product Manager Optics Business Unit Catalog LINOS Photonics GmbH & Co. KG Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 1
2 The Software Package WinLens TM 3D Lecture forum WinLens 3D Creation and optimisation of optical systems with standard and custom components Tolerancer Sensitivity analysis for key design parameters, Monte Carlo simulations of impact of production tolerances on performance etc. Glass Manager Database of optical glasses, comparison and selection of glass types etc. Material Editor Creation, editing and managing custom materials PreDesigner To assess & illustrate the key paraxial parameters for an imaging system etc. WinLens Basic Free version of WinLens 3D Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 2
3 Optical System Design Lecture forum PreDesigner WinLens Glass Manager Material Editor Tolerancer Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 3
4 Lecture forum LINOS lens database Hier Howklicken, to insert um Master-Titelformat Optical Components zu bearbeiten in WinLens TM 3D pre-defined elements Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 4
5 NEW FUNCTION: Prism Wizard Lecture forum Simple and user-friendly insertion of prisms and wedge plates Prism Wizard Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 5
6 NEW FUNCTION: 3D Options Wire-frame or solid model (e.g. full, ½- or ¾-elements) Sliders to rotate image Lecture forum Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 6
7 Lecture forum Hier NEW klicken, FUNCTION: um Master-Titelformat Wavefront zu Plot bearbeiten / Interferogram Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 7
8 NEW FUNCTION: Tilt & Decenter Lecture forum Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 8
9 Lecture forum Hier Example: klicken, um Influence Master-Titelformat of Position zu bearbeiten Tolerances by T&D Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 9
10 Lecture forum Hier NEW klicken, FUNCTION: um Master-Titelformat Prepare Quotation zu bearbeitenrequest Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 10
11 Lecture forum Hier Parts klicken, List um of Master-Titelformat Customised and zu bearbeiten Standard Components Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 11
12 Lecture forum Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 12
13 Tipps, tricks and hints in short narrated video clips... Lecture forum Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 13
14 Lecture forum Thank you for your attention! Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 14
15 Some new Options in WinLens TM 3D: Lecture forum Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 15
16 Lecture forum T&D on surface X does not alter the global position of any following surface unless surface X is a fold mirror surface. Fold mirrors [either stand-alone or inside prisms], by default, rotate the reference axis by 2x the angle of tilt. Tilting a component, group or module does not alter the global position of any following components unless chosen otherwise. Tilting a component, group or module does not alter the tilts on individual surfaces within that item. Co-ordinate breaks can be used to manually redefine the reference axis direction for all following components Christoph GERHARD, Product Manager Optics LASER 2009, Munich Slide 16
Application Report: Running µshape TM on a VF-20 Interferometer
: Running µshape TM on a VF-20 Interferometer General This report describes how a fiber interferometer from Arden Photonics Ltd was used together with the µshape TM Generic software package. The VF-20
Optical Systems Design with Zemax OpticStudio. Lecture 1
Optical Systems Design with Zemax OpticStudio Lecture 1 Why Optical Systems Design Optical system design is no longer a skill reserved for a few professionals. With readily available commercial optical
Simplifying Opto- Mechanical Product Development: How a new product reduces cost, stress, and time to market
Simplifying Opto- Mechanical Product Development: How a new product reduces cost, stress, and time to market Innovation in optical design is exploding. From cell phone cameras to space telescopes, driverless
5.3 Cell Phone Camera
164 Chapter 5 5.3 Cell Phone Camera The next design example we discuss is a cell phone camera. These systems have become quite popular, to the point that it is often more difficult to purchase a cell phone
Atomic Force Microscope and Magnetic Force Microscope Background Information
Atomic Force Microscope and Magnetic Force Microscope Background Information Lego Building Instructions There are several places to find the building instructions for building the Lego models of atomic
EXPERIMENT O-6. Michelson Interferometer. Abstract. References. Pre-Lab
EXPERIMENT O-6 Michelson Interferometer Abstract A Michelson interferometer, constructed by the student, is used to measure the wavelength of He-Ne laser light and the index of refraction of a flat transparent
Choosing The Right Optical Design Software
White Paper Choosing The Right Optical Design Software January 2014 Author Jay Wilson, CODE V Sales Engineer Introduction As a decision maker responsible for making the right choices for your company s
A new advance in routine inspections INVERTED MICROSCOPE CKX41/CKX31
A new advance in routine inspections INVERTED MICROSCOPE CKX41/CKX31 Phase contrast Relief contrast Incorporation of advanced UIS2 optics ensures the highest level of clarity for cell checking applications.
Vincent Constantin, CADFEM (Suisse) AG
Fast Titelmasterformat and reliable Bolt durch Assessment Klicken bearbeiten inside ANSYS Vincent Constantin, CADFEM (Suisse) AG Agenda Introduction VDI 2230 Bolt Assessment inside ANSYS Verification Examples
MET 306. Activity 8a. Mechanism Design Creo 2.0 Level 7 POINT A GROUND LINK LINK 1 LINK 2 LINK 3 POINT B 10/15/2010 1
Mechanism Design Creo 2.0 Level 7 POINT A LINK 1 GROUND LINK LINK 2 LINK 3 POINT B 10/15/2010 1 Download parts ground, key, link_1, link_2, link_3 and pulley from the V:/MET_306/Activity_8_Creo drive.
Stainless Steel Marking Guide
Stainless Steel Marking Guide Laser Processing Guide: Marking Stainless Steel There are three options available for marking stainless steel: direct mark using a CO 2 laser and High Power Density Focusing
Parts List. The HyperStar Lens Assembly includes three pieces: HyperStar Lens Secondary Mirror Holder Counterweight
The HyperStar Lens allows CCD imaging at f/2.3 with compatible Celestron 9.25 Schmidt-Cassegrain telescopes and compatible CCD cameras. These instructions show the proper methods for installing the HyperStar
New Features. LucidShape 2.0. Thorsten Schupp LucidShape User Group Meeting. June 2015 Farmington Hills, Michigan
New Features LucidShape 2.0 Thorsten Schupp LucidShape User Group Meeting June 2015 Farmington Hills, Michigan Overview Material Library: LightTools BSDF Data Ray Data File Viewer Light Pipe Tool Improvements
Tube Control Measurement, Sorting Modular System for Glass Tube
Tube Control Measurement, Sorting Modular System for Glass Tube Tube Control is a modular designed system of settled instruments and modules. It comprises measuring instruments for the tube dimensions,
Be careful not to scratch or hit front edge of the side viewing micro prisms onto hard objects!
Instructions Manual Flexia BGA Inspection Systems This manual describes how to use Flexia BGA Inspection System Optilia Instruments 1 AB Contents 1. Safety and maintenance Instructions 3 2. About Flexia
40-6680 5 Beam Laser Pointer Service Manual
40-6680 5 Beam Laser Pointer Service Manual Contents Item Description Pages 1.0 Introduction 2 2.0 Overall Instrument Dis-assembly 2 2.1 Body module Dis-assembly 3 2.2 Core Module Dis-Assembly 4-5 2.3
Introduction Configuring Your HP Mouse Batteries Replacing the Batteries Mouse Sensor Technology Navigating the HP Mouse Control Center
Introduction Congratulations on your purchase of an HP mouse. This mouse is the latest in a wide range of computer peripherals manufactured by HP. It is designed to provide you with the highest level of
Laser expander design of highly efficient Blu-ray disc pickup head
Laser expander design of highly efficient Blu-ray disc pickup head Wen-Shing Sun, 1,* Kun-Di Liu, 1 Jui-Wen Pan, 1 Chuen-Lin Tien, 2 and Min-Sheng Hsieh 1 1 Department of Optics and Photonics, National
b. In Laser View - click on wave. Pose an explanation that explains why the light bends when it enters the water.
Sierzega/Ferri: Optics 5 Observation Experiments: Light Bending Go to: http://phet.colorado.edu/en/simulation /bending-light You have a laser beam (press the button to turn it on!) that is shining from
Optical laser beam scanner lens relay system
1. Introduction Optical laser beam scanner lens relay system Laser beam scanning is used most often by far in confocal microscopes. There are many ways by which a laser beam can be scanned across the back
Choosing the Right Illumination Design Software
White Paper Choosing the Right Illumination Design Software April 2015 Author Introduction Stuart David Senior Manager, Worldwide Sales Optical Solutions Group As a decision maker responsible for making
Improved predictive modeling of white LEDs with accurate luminescence simulation and practical inputs
Improved predictive modeling of white LEDs with accurate luminescence simulation and practical inputs TracePro Opto-Mechanical Design Software s Fluorescence Property Utility TracePro s Fluorescence Property
RAY TRACING UNIFIED FIELD TRACING
RAY TRACING Start to investigate the performance of your optical system using 3D ray distributions, dot diagrams of ray positions and directions, and optical path length. GEOMETRIC FIELD TRACING Switch
Product Information. QUADRA-CHEK 3000 Evaluation Electronics For Metrological Applications
Product Information QUADRA-CHEK 3000 Evaluation Electronics For Metrological Applications April 2016 QUADRA-CHEK 3000 The evaluation electronics for intuitive 2-D measurement The QUADRA-CHEK 3000 evaluation
MEMS mirror for low cost laser scanners. Ulrich Hofmann
MEMS mirror for low cost laser scanners Ulrich Hofmann Outline Introduction Optical concept of the LIDAR laser scanner MEMS mirror requirements MEMS mirror concept, simulation and design fabrication process
Optical Engineering and Instrument Design Certificate Programs
Optical Engineering and Instrument Design Certificate Programs University of California Irvine University Extension UNIVERSITY OF CALIFORNIA, IRVINE UNIVERSITY EXTENSION CERTIFICATE PROGRAMS IN Optical
Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD
Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD Dipl.-Ing. (FH) Jan Smedseng CFX Berlin Software GmbH 030 293 811 41 [email protected] Contents DrivAer Body Geometry preparation
femtosecond laser platform Exceptional versatility without compromise
Introducing the VICTUS femtosecond laser platform Exceptional versatility without compromise FEMTOSECOND TECHNOLOGY that empowers Introducing VICTUS the first femtosecond laser capable of exceptional performance
TRIMBLE TX5 3D LASER SCANNER QUICK START GUIDE
TRIMBLE TX5 3D LASER SCANNER QUICK START GUIDE Equipment 1 8 9 5 6 7 4 3 2 The TX5 laser scanner ships with the following equipment: 1 Scanner transport and carry case 6 USB memory card reader 2 AC power
Opto-Mechanical I/F for ANSYS
Abstract Opto-Mechanical I/F for ANSYS Victor Genberg, Keith Doyle, Gregory Michels Sigmadyne, Inc., 803 West Ave, Rochester, NY 14611 [email protected] Thermal and structural output from ANSYS is
Surface Mount LEDs - Applications Application Note
Surface Mount LEDs - Applications Application Note Introduction SMT Replaces Through Hole Technology The use of SMT-TOPLED varies greatly from the use of traditional through hole LEDs. Historically through
digital quality control fail pass at your fingertips Smart Metrology Solutions.
digital quality control fail pass µphase smartgage The clever innovation in digital metrology by FISBA, which lets you smarten up your quality management and economize your production processes, yet spares
Sento LED parete singolo up cutsheet
0.2m Sento LED parete singolo up cutsheet LED wall mounted luminaire with a high base, in which the power supply unit (converter) is included for mounting on fixed ceiling or wall, connection to 230V.
Synthetic Sensing: Proximity / Distance Sensors
Synthetic Sensing: Proximity / Distance Sensors MediaRobotics Lab, February 2010 Proximity detection is dependent on the object of interest. One size does not fit all For non-contact distance measurement,
Avira Server Security Product Updates. Best Practice
Avira Server Security Product Updates Best Practice Table of Contents 1. What is Avira Server Security?... 3 2. Where else can Avira Server Security be found?.. 4 3. What is the difference between updates
Press Release. Superior bending
Superior bending An array of new features makes TRUMPF s new TruBend Series 5000 more productive and user-friendly than ever before. Using a new control concept, the machines are amazingly easy to operate.
A Guide to Acousto-Optic Modulators
A Guide to Acousto-Optic Modulators D. J. McCarron December 7, 2007 1 Introduction Acousto-optic modulators (AOMs) are useful devices which allow the frequency, intensity and direction of a laser beam
Application-Specific Optical Design
White Paper Application-Specific Optical Design May 2012 Author David Hasenauer CODE V Product Manager, Optical Solutions Group, Synopsys, Inc. Introduction Optical design software capabilities have advanced
Efficiency, Dispersion and Straylight Performance Tests of Immersed Gratings for High Resolution Spectroscopy in the Near Infra-red
Changing the economics of space Efficiency, Dispersion and Straylight Performance Tests of Immersed Gratings for High Resolution Spectroscopy in the Near Infra-red J. Fernandez-Saldivar 1, F. Culfaz 1,
An introduction to Global Illumination. Tomas Akenine-Möller Department of Computer Engineering Chalmers University of Technology
An introduction to Global Illumination Tomas Akenine-Möller Department of Computer Engineering Chalmers University of Technology Isn t ray tracing enough? Effects to note in Global Illumination image:
How To Program A Laser Cutting Robot
Robotics ABB Robotics Laser Cutting Software High precision laser cutting made easy - Greater manufacturing flexibility at lower capital investment Robotic laser cutting Overview Allows for the increased
Customer routing systems and entry system Easy Entry.
Customer routing systems and entry system Easy Entry. The safe, flexible and targeted route through your market. KESSEBÖHMER 0 0 Guide client streams, separate sales zones, enhance theft protection. The
Pro/ENGINEER Wildfire 4.0 Basic Design
Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do
Thermodynamically efficient NONIMAGING OPTICS Dan David Symposium UC MERCED September 26, 2008
Thermodynamically efficient NONIMAGING OPTICS Dan David Symposium UC MERCED September 26, 2008 Nonimaging optics departs from the methods of traditional optical design by instead developing techniques
1 of 9 2/9/2010 3:38 PM
1 of 9 2/9/2010 3:38 PM Chapter 23 Homework Due: 8:00am on Monday, February 8, 2010 Note: To understand how points are awarded, read your instructor's Grading Policy. [Return to Standard Assignment View]
Given ZEMAX's user-interface and available tools, the singlet can be modeled and optimized easily!
of 19 http://home.strw.leidenuniv.nl/~brandl/obstech/zemax_intro.html 10/6/2012 8:55 AM ZEMAX Users' Knowledge Base - http://www.zemax.com/kb How To Design a Singlet Lens http://www.zemax.com/kb/articles/20/1/how-to-design-a-singlet-lens/page1.html
CATIA V5 Tutorials. Mechanism Design & Animation. Release 18. Nader G. Zamani. University of Windsor. Jonathan M. Weaver. University of Detroit Mercy
CATIA V5 Tutorials Mechanism Design & Animation Release 18 Nader G. Zamani University of Windsor Jonathan M. Weaver University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com
HOW TO... Channel Window Balances
Take Out Clips Open HOW TO... Channel Window Balances Used On Single Or Double Hung Sash Balance Shown Installed In Jamb With Sash Removed Remove the sash stops. Close sash to expose take-out clips. Open
LASER ENGRAVING REFLECTIVE METALS TO CREATE SCANNER READABLE BARCODES Paper P516
LASER ENGRAVING REFLECTIVE METALS TO CREATE SCANNER READABLE BARCODES Paper P516 Paul M Harrison, Jozef Wendland, Matthew Henry Powerlase Ltd, Imperial House, Link 10, Napier Way, Crawley, West Sussex,
AutoCAD 2009. New Icon Quick Reference
AutoCAD 2009 New Quick Reference Contents Chapter 1 New Quick Reference..................... 1 Toolbars................................... 1 3D Navigation Toolbar........................ 1 CAD Standards
CSCW and Software Engineering
Mastertitelformat bearbeiten CSCW and Software Engineering Dr.-Ing. Stefan Werner Chapter 2: Introduction to CSCW and Software Engineering Slide 1of 21 Table of Content Mastertitelformat bearbeiten 1.
4. CAMERA ADJUSTMENTS
4. CAMERA ADJUSTMENTS Only by the possibility of displacing lens and rear standard all advantages of a view camera are fully utilized. These displacements serve for control of perspective, positioning
Optical System Design
Optical System Design Robert E. Fischer CEO, OPTICS 1, Incorporated Biljana Tadic-Galeb Panavision Paul R. Yoder Consultant With contributions by Ranko Galeb Bernard C.Kress, Ph.D. Stephen C. McClain,
Implementation of the Movable Photovoltaic Array to Increase Output Power of the Solar Cells
Implementation of the Movable Photovoltaic Array to Increase Output Power of the Solar Cells Hassan Moghbelli *, Robert Vartanian ** * Texas A&M University, Dept. of Mathematics **Iranian Solar Energy
DWOS Lava Edition 5.0 new features
DWOS Lava Edition 5.0 new features Version 1.0 April 21, 2015 This document presents the new features and significant improvements brought with the DWOS Lava 5.0.0 release. Descriptions, instructions and
LEGENDplex Data Analysis Software
LEGENDplex Data Analysis Software Version 7.0 User Guide Copyright 2013-2014 VigeneTech. All rights reserved. Contents Introduction... 1 Lesson 1 - The Workspace... 2 Lesson 2 Quantitative Wizard... 3
Automatically created Edit using CAD tools Export to DWG
Photovoltaic design software BlueSol is a software for the design of photovoltaic systems in every country in the world. It allows you to perform the entire process of designing a PV system, from the preliminary
Faster recovery of visual acuity at all distances
news Special issue PresbyMAX Faster recovery of visual acuity at all distances PresbyMAX μ-monovision: The latest technique for treating presbyopia SCHWIND now offers PresbyMAX µ-monovision as a new option
7 Watt Solar Charger Solar Panel
7 Watt Solar Charger Solar Panel Owner s Manual Warning: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
User manual For customers in North and South America For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
Creo Simulate 1.0 April 2011
Creo Simulate 1.0 April 2011 Creo Simulate a Creo family app Installed / Un-installed separately Creo Simulate in two modes: Embedded mode module of Creo Parametric Standalone mode In Standalone mode:
Automated part positioning with the laser tracker
Automated part positioning with the laser tracker S. Kyle, R. Loser, D. Warren Leica Abstract Improvements and new developments for Leica's laser tracker make it suitable for measuring the relative position
Reflection and Refraction
Equipment Reflection and Refraction Acrylic block set, plane-concave-convex universal mirror, cork board, cork board stand, pins, flashlight, protractor, ruler, mirror worksheet, rectangular block worksheet,
10 Backing Up Windows 7
10 This chapter looks at the options that are available in Windows 7 for backing up your system. In some cases additional software may be supplied by the manufacturer of your computer to backup it up.
THE BEST OF BOTH WORLDS Dual-Scheimpflug and Placido Reaching a new level in refractive screening
THE BEST OF BOTH WORLDS Dual-Scheimpflug and Placido Reaching a new level in refractive screening GALILEI G4 Clinical Applications Corneal Implant Planning The comes with a licensable corneal inlay software
ENGINEERING METROLOGY
ENGINEERING METROLOGY ACADEMIC YEAR 92-93, SEMESTER ONE COORDINATE MEASURING MACHINES OPTICAL MEASUREMENT SYSTEMS; DEPARTMENT OF MECHANICAL ENGINEERING ISFAHAN UNIVERSITY OF TECHNOLOGY Coordinate Measuring
RL HW / RL HW+ / RL HGW / RL HV / RL HVPW/RL HVPW-G
Auto-Levelling Rotary Laser Level RL HW / RL HW+ / RL HGW / RL HV / RL HVPW/RL HVPW-G 77-496 / 77-429 / 77-439 / 77-497 / 77-427/ 77-441 Please read these instructions before operating the product Auto-Levelling
Spheroline SLC 50. Precision centering. Precision Optics
Spheroline SLC 50 Precision centering Precision Optics Introducing the Spheroline SLC 50 Precise Centering plays an essential role in maximizing the performance of precision-optical elements. The Spheroline
CREATE A 3D MOVIE IN DIRECTOR
CREATE A 3D MOVIE IN DIRECTOR 2 Building Your First 3D Movie in Director Welcome to the 3D tutorial for Adobe Director. Director includes the option to create three-dimensional (3D) images, text, and animations.
Service Guide. Gateway M275
Service Guide Gateway M275 Contents Replacing Gateway M275 Components.................................... 1 Identifying the convertible tablet PC model...................................... 2 Identifying
White paper. Sharpdome. Sharp images on every level
White paper Sharpdome Sharp images on every level Table of contents 1. Introduction 3 2. Conventional dome limitations 3 2.1 L-value 4 3. Sharpdome 5 3.1 Transparent covering material 6 3.2 Axis Speed
Home Designer. Interiors. New Version!
Interiors Home Designer New Version! 0 10 T quickly with easy How-To Videos for step-by-step instructions HomeDesignerSoftware.com Interior Design Decorating Kitchens & Baths Room Design Remodeling Furniture
Finding Drag Coefficient using Solidworks Flow Simulation
Finding Drag Coefficient using Solidworks Flow Simulation Using solidworks to find the drag coefficient of shapes is a very useful way to cut down on the design time of a project, as it can remove tests.
Proton tracking for medical imaging and dosimetry
Proton tracking for medical imaging and dosimetry J.Taylor, P.Allport, G.Casse For the PRaVDA Consortium 1 Background and motivation - What is the PRaVDA experiment? - Why are we using Monte Carlo? GEANT4
Introduction to Lensometry Gregory L. Stephens, O.D., Ph.D. College of Optometry, University of Houston 2010
Introduction to Lensometry Gregory L. Stephens, O.D., Ph.D. College of Optometry, University of Houston 2010 I. Introduction The focimeter, lensmeter, or Lensometer is the standard instrument used to measure
Micro-optical switches for future telecommunication payloads : achievements of the SAT 'N LIGHT Project
Micro-optical switches for future telecommunication payloads : achievements of the SAT 'N LIGHT Project Peter Herbst 1, Cornel Marxer 1, Michel Sotom 2, Christoph Voland 3, Michael Zickar 4, Wilfried Noell
Contents. Introduction 2. Features and Benefits 3. Freeform Design Range 10. Custom 14/16/18 13. Custom U 15. Custom V 17.
Contents page Introduction 2 Features and Benefits 3 Freeform Design Range Custom 14/16/18 13 Custom U 1 Custom V 17 Custom Office 19 Custom Driver Custom Relax 21 Custom Junior 22 Custom Blended Bifocal
Marketing Sustainable Mobility in Munich - The Mobility Management Concept -
Klicken Sie, um das Titelformat zu bearbeiten Marketing Sustainable Mobility in Munich - The Concept - Sustainable Urban Mobility: Planning Tools Knowledge Sharing Seminar Kyiv City State Administration
P R E A M B L E. Facilitated workshop problems for class discussion (1.5 hours)
INSURANCE SCAM OPTICS - LABORATORY INVESTIGATION P R E A M B L E The original form of the problem is an Experimental Group Research Project, undertaken by students organised into small groups working as
Let s go. Get your Ultra Broadband ready modem up and running
Let s go Get your Ultra Broadband ready modem up and running Contents TELECOM HOME MODEM ULTRA BROADBAND READY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Equipment Check 2 Getting Started 3 Setting Up Fibre
Center of Gravity. We touched on this briefly in chapter 7! x 2
Center of Gravity We touched on this briefly in chapter 7! x 1 x 2 cm m 1 m 2 This was for what is known as discrete objects. Discrete refers to the fact that the two objects separated and individual.
Chapter 10 - Scaffolding Systems
Chapter 10 - Scaffolding Systems Contents Chapter 10 - Scaffolding Systems... 10-1 Check and Oil the Pump Jacks... 10-4 Set Pump Jack Brackets... Error! Bookmark not defined. Set Pump Jack Poles... 10-5
National Optical & Scientific Instruments Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104
National Optical & Scientific Instruments Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104 INSTRUCTIONS FOR MODELS 106, 106-L 107, 107-L 108, 108-L 109-L ELEMENTARY
Astronomy 110 Homework #04 Assigned: 02/06/2007 Due: 02/13/2007. Name:
Astronomy 110 Homework #04 Assigned: 02/06/2007 Due: 02/13/2007 Name: Directions: Listed below are twenty (20) multiple-choice questions based on the material covered by the lectures this past week. Choose
Welcome to the topic on Enhancements in Sending E-Mail in release 9.1
Welcome to the topic on Enhancements in Sending E-Mail in release 9.1 1 After completing this topic, you will be able to: Outline the enhancements in sending E-Mail in version 9.1. Define the settings
Physics 116. Nov 4, 2011. Session 22 Review: ray optics. R. J. Wilkes Email: [email protected]
Physics 116 Session 22 Review: ray optics Nov 4, 2011 R. J. Wilkes Email: [email protected] ! Exam 2 is Monday!! All multiple choice, similar to HW problems, same format as Exam 1!!! Announcements
PowerPoint Presentation
PowerPoint Presentation 1. Power Source Are the laptop and LCD projector plugged in? If so, are they plugged directly into a power outlet or a power strip? Do the power outlet and/or strip work? If there
Tyan Computer. Transport PX22. Service Engineer s Manual
Tyan Computer Transport PX22 Service Engineer s Manual 1 Precaution To read through the user manual, check all assembly and follow setup process before any operation on this server To keep paper clips,
Course in ANSYS. Import + meshing issues. ANSYS Part 2 Computational Mechanics, AAU, Esbjerg
Course in ANSYS Import + meshing issues Course Outline Introduction Lesson 1. Modeling reviewed Boolean s Lesson 2. Boolean s + meshing issues Lesson 3. Operate + meshing issues Lesson 4. Import + meshing
White paper Power Consumption Monitoring of PRIMERGY Servers in System Center Operations Manager
White paper Power Consumption Monitoring of PRIMERGY Servers in System Center Operations Manager This technical white paper describes how to use the Power Management Packs published by Microsoft for Operations
Diffraction and Young s Single Slit Experiment
Diffraction and Young s Single Slit Experiment Developers AB Overby Objectives Preparation Background The objectives of this experiment are to observe Fraunhofer, or far-field, diffraction through a single
For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
User manual For customers in North and South America For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not