AutoCAD New Icon Quick Reference
|
|
|
- Felix Gibson
- 9 years ago
- Views:
Transcription
1 AutoCAD 2009 New Quick Reference
2
3 Contents Chapter 1 New Quick Reference Toolbars D Navigation Toolbar CAD Standards Toolbar Camera Adjustment Toolbar Dimension Toolbar Draw Toolbar Draw Order Toolbar Find Text Toolbar Inquiry Toolbar Insert Toolbar Layers Toolbar Layers II Toolbar Layouts Toolbar Lights Toolbar Mapping Toolbar Modeling Toolbar Modify Toolbar Modify II Toolbar Multileader Toolbar Object Snap Toolbar Orbit Toolbar Refedit Toolbar Reference Toolbar iii
4 Render Toolbar Solid Editing Toolbar Standard Toolbar Standard Annotation Styles Toolbar Text Toolbar UCS Toolbar UCS II Toolbar View Toolbar Viewports Toolbar Visual Styles Toolbar Walk and Fly Toolbar Web Toolbar Workspaces Toolbar Zoom Toolbar Index iv Contents
5 New Quick Reference 1 This document lists the icons in toolbars in AutoCAD Refer to this document to quickly become familiar with the icons. Toolbars 3D Navigation Toolbar 3D Pan Swivel 3D Zoom Adjust Distance Constrained Orbit Walk 1
6 Continuous Orbit Fly Free Orbit Walk and Fly Settings CAD Standards Toolbar Configure Layer Translator Check Camera Adjustment Toolbar Swivel Adjust Distance 2 Chapter 1 New Quick Reference
7 Dimension Toolbar Linear Dimension Space Aligned Dimension Break Arc Length Tolerance Ordinate Center Mark Radius Inspection Jogged Jogged Linear Diameter Dimension Edit Angular Dimension Text Edit Quick Dimension Dimension Update Dimension Toolbar 3
8 Baseline Dimension Style Continue Draw Toolbar Line Insert a DWF Underlay Construction Line Insert a DGN Underlay Polyline Attach Image Polygon Import Rectangle OLE Object Arc Make Block 4 Chapter 1 New Quick Reference
9 Circle Point Revision Cloud Hatch Spline Gradient Ellipse Region Ellipse Arc Table Insert Block Multiline Text Attach Xref Draw Order Toolbar Bring to Front Bring Above Objects Draw Order Toolbar 5
10 Send to Back Send Under Objects Find Text Toolbar Search Text Inquiry Toolbar Distance List Area Locate Point Region/Mass Properties 6 Chapter 1 New Quick Reference
11 Insert Toolbar Insert Block Attach Image Attach Xref Import Insert a DWF Underlay OLE Object Insert a DGN Underlay Layers Toolbar Layer Properties Manager Layer Previous Make Object s Layer Current Layer States Manager Insert Toolbar 7
12 Layers II Toolbar Layer Match Layer Walk Change to Current Layer Layer Freeze Layer Isolate Layer Off Layer Unisolate Layer Lock Copy Objects to New Layer Layer Unlock Layouts Toolbar New Layout Page Setup Manager 8 Chapter 1 New Quick Reference
13 Layout from Template Display Viewports Dialog Lights Toolbar New Point Light Light List New Spotlight Geographic Location New Distant Light Sun Properties Mapping Toolbar Planar Mapping Spherical Mapping Lights Toolbar 9
14 Box Mapping Cylindrical Mapping Modeling Toolbar Polysolid Presspull Box Sweep Wedge Revolve Cone Loft Sphere Union Cylinder Subtract Torus Intersect 10 Chapter 1 New Quick Reference
15 Pyramid 3D Move Helix 3D Rotate Planar Surface 3D Align Extrude 3D Array Modify Toolbar Erase Trim Copy Extend Mirror Break at Point Offset Break Modify Toolbar 11
16 Array Join Move Chamfer Rotate Fillet Scale Explode Stretch Modify II Toolbar Draworder Edit Attribute Edit Hatch Block Attribute Manager Edit Polyline Synchronize Attributes 12 Chapter 1 New Quick Reference
17 Edit Spline Data Extraction Multileader Toolbar Multileader Align Multileaders Add Leader Collect Multileaders Remove Leader Multileader Style Object Snap Toolbar Temporary track point Snap to Tangent Multileader Toolbar 13
18 Snap From Snap to Perpendicular Snap to Endpoint Snap to Parallel Snap to Midpoint Snap to Insert Snap to Intersection Snap to Node Snap to Apparent Intersect Snap to Nearest Snap to Extension Snap to None Snap to Center Osnap Settings Snap to Quadrant 14 Chapter 1 New Quick Reference
19 Orbit Toolbar Constrained Orbit Continuous Orbit Free Orbit Refedit Toolbar Edit Reference In-Place Close Reference Add to Working Set Save Reference Edits Remove from Working Set Orbit Toolbar 15
20 Reference Toolbar External References Clip Image Attach Xref Adjust Image Clip Xref Image Quality Xbind Image Transparency Xref Frame Image Frame Attach Image 16 Chapter 1 New Quick Reference
21 Render Toolbar Hide Light List Render Materials New Point Light Planar Mapping New Point Light Box Mapping New Spotlight Spherical Mapping New Distant Light Cylindrical Mapping Light List Render Environment Geographic Location Advanced Render Settings Render Toolbar 17
22 Sun Properties Solid Editing Toolbar Union Copy faces Subtract Color faces Intersect Copy edges Extrude Color edges Move faces Imprint Offset faces Clean Delete faces Separate 18 Chapter 1 New Quick Reference
23 Rotate faces Shell Taper faces Check Standard Toolbar QNew Zoom All Open Zoom Dynamic Save Zoom Scale Plot Zoom Center Plot Preview Zoom Object Publish Zoom In Standard Toolbar 19
24 3DDWF Zoom Out Impression Zoom Extents Cut Zoom Previous Copy Properties Paste Design Center Match Properties Tool Palettes Window Block Editor Sheet Set Manager Pan Realtime Markup Set Manager Zoom Realtime QuickCalc Zoom Window Help 20 Chapter 1 New Quick Reference
25 Standard Annotation QNew Block Editor Open Properties Save Design Center Plot Tool Palettes Window Plot Preview Markup Set Manager Publish QuickCalc Match Properties Help Standard Annotation 21
26 Styles Toolbar Text Style Table Style Dimension Style Multileader Style Text Toolbar Multiline Text Text Style Single Line Text Scale Edit Justify Find Convert distance between spaces 22 Chapter 1 New Quick Reference
27 Spell Check UCS Toolbar UCS Z Axis Vector World 3 Point UCS Previous X Face UCS Y Object Z View Apply Origin UCS Toolbar 23
28 UCS II Toolbar UCS Named UCS View Toolbar Named Views SW Isometric Top SE Isometric Bottom NE Isometric Left NW Isometric Right Create Camera 24 Chapter 1 New Quick Reference
29 Front Previous View Back Viewports Toolbar Display Viewports Dialog Convert Object to Viewport Single Viewport Clip existing viewport Polygonal Viewport Viewports Toolbar 25
30 Visual Styles Toolbar 2D Wireframe Realistic Visual Style 3D Wireframe Visual Style Conceptual Visual Style 3D Hidden Visual Style Manage Visual Styles Walk and Fly Toolbar Walk Walk and Fly Settings Fly 26 Chapter 1 New Quick Reference
31 Web Toolbar Go Back Stop Navigation Go Forward Browse the Web Workspaces Toolbar Workspace Settings My Workspace Zoom Toolbar Zoom Window Zoom In Web Toolbar 27
32 Zoom Dynamic Zoom Out Zoom Scale Zoom All Zoom Center Zoom Extents Zoom Object 28 Chapter 1 New Quick Reference
Pro/ENGINEER Wildfire 4.0 Basic Design
Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do
An introduction to 3D draughting & solid modelling using AutoCAD
An introduction to 3D draughting & solid modelling using AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA These notes are to be used in conjunction with the AutoCAD software
CATIA Wireframe & Surfaces TABLE OF CONTENTS
TABLE OF CONTENTS Introduction... 1 Wireframe & Surfaces... 2 Pull Down Menus... 3 Edit... 3 Insert... 4 Tools... 6 Generative Shape Design Workbench... 7 Bottom Toolbar... 9 Tools... 9 Analysis... 10
Chapter 23: Drafting in Worksheet View
Chapter 23: Drafting in Worksheet View Worksheet View is a powerful, 2D production drafting module. Here you can find all of the drawing and editing tools needed to create fast, accurate, detailed working
Computer-Aided Drafting I
Course Syllabus Computer-Aided Drafting I Course Description This course introduces computer-aided drafting (CAD) and examines the hardware that makes up a CAD workstation. It also covers the operating
AutoCAD Workbook 3D DRA 54 Hartnell College Engineering Technology Parviz D. Entekhabi
AutoCAD Workbook 3D AutoCAD Workbook 3D DRA 54 Hartnell College Engineering Technology Parviz D. Entekhabi 1 Lesson 01 Creating a Basic 3D Surface Model Elevation & Thickness AutoCAD Workbook 3D To work
Mastering AutoCAD 2008 and AutoCAD LT 2008
Mastering AutoCAD 2008 and AutoCAD LT 2008 George Omura ISBN: 978-0-470-13738-3 Paperback 1000 pages August 2007 Description Mastering AutoCAD 2008 and AutoCAD LT 2008 offers a unique blend of tutorial
Lesson Four 3D Modeling
Lesson Four 3D Modeling In this lesson you will learn how to: Easily Rotate the UCS to model in different planes Model lines in a method similar to drawing isometrics Create 3D Router Lines Automatically
ZWCAD Professional vs. Standard vs. Academic
ZWCAD Professional vs. Standard vs. Academic Feature supported Feature not supported Compatibility with AutoCAD DWG & DXF File Format Support AutoCAD Command AutoCAD Menu(.mnu)& Alias Support TTF & SHX
CATIA Drafting TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Drafting...2 Drawing Screen...3 Pull-down Menus...4 File...4 Edit...5 View...6 Insert...7 Tools...8 Drafting Workbench...9 Views and Sheets...9 Dimensions and Annotations...10
SolidWorks Implementation Guides. Sketching Concepts
SolidWorks Implementation Guides Sketching Concepts Sketching in SolidWorks is the basis for creating features. Features are the basis for creating parts, which can be put together into assemblies. Sketch
2013 Getting Started Guide
2013 Getting Started Guide The contents of this guide and accompanying exercises were originally created by Nemetschek Vectorworks, Inc. Vectorworks Fundamentals Getting Started Guide Created using: Vectorworks
Kankakee Community College
Kankakee Community College Course prefix and number: DRFT 2134 Course title: AutoCAD III Semester: Fall 2014 Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Catalog description: Prerequisite: DRFT 2114,
After completing this tutorial, you will be able to: Use the new 3D Modeling tools in AutoCAD 2007 for basic Lofting.
TUTORIAL 3 Lofted Solid Learning Objectives After completing this tutorial, you will be able to: Use the new 3D Modeling tools in AutoCAD 2007 for basic Lofting. Required Competencies Before starting this
TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
SOEM 024: Computer Aided Design. E. Rozos
SOEM 024: Computer Aided Design E. Rozos 3D Design with AutoCAD 2002 Isometric Drawings 3D coordinates, views Wire-frame 3D modelling, extruding Primitive objects Boolean operators Terminology Boolean
Edinburgh COLLEGE of ART ARCHITECTURE 3D Modelling in AutoCAD - tutorial exercise The screen The graphics area This is the part of the screen in which the drawing will be created. The command prompt area
To develop an understanding of the basic principles of drawing using AutoCAD. 3) Deduce the intersection lines for intersected cylinders.
PROGRAMME: COURSE NAME: NATIONAL DIPLOMA IN INTERIOR DESIGN COMPUTER AIDED DESIGN (2D) COURSE CODE: ARC 213 DURATION: 0 4 4 UNITS: GOAL: GENERAL OBJECTIVES: 4 UNIT To develop an understanding of the basic
AutoCAD i 3D Samordningsmodell Tips og Triks for tegning i 3D med AutoCAD
AutoCAD i 3D Samordningsmodell Tips og Triks for tegning i 3D med AutoCAD Tesfaye Kebede Vianova systems AutoCAD 3D AutoCAD - 3D Samordningsmodell - Course Contents - New Features 3D AutoCAD 2013 - Sheet
Creating 2D Drawings from 3D AutoCAD Models
Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the
Introduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
Introduction to CATIA V5
Introduction to CATIA V5 Release 16 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives
Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to
What We Should Really Be Teaching in the AutoCAD Classroom, Part I
What We Should Really Be Teaching in the AutoCAD Classroom, Part I J.C. Malitzke Moraine Valley Community College ED305-1 This class will present the challenges instructors face with the 2D commands and
Basic AutoSketch Manual
Basic AutoSketch Manual Instruction for students Skf-Manual.doc of 3 Contents BASIC AUTOSKETCH MANUAL... INSTRUCTION FOR STUDENTS... BASIC AUTOSKETCH INSTRUCTION... 3 SCREEN LAYOUT... 3 MENU BAR... 3 FILE
AutoCAD 3D I. Module 6. Visualizing Multiview Drawings. Curriculum Development Unit PREPARED BY. August 2013
AutoCAD 3D I Module 6 Visualizing Multiview Drawings PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 Module 6 Visualizing Multiview Drawings Module Objectives
Online Training Program Offered by CADCIM Technologies
Online Training Program Offered by CADCIM Technologies CADCIM Technologies provides effective and affordable online training on various software packages including Computer Aided Design and Manufacturing
Basic controls of Rhinoceros 3D software
lecture 2 Basic controls of Rhinoceros 3D software After the start Rhinoceros 3D software shows basic working area compound by four viewports (show model in other positions), popup menu over, palette menu
There are two distinct working environments, or spaces, in which you can create objects in a drawing.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: [email protected] Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial
Introduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
To draw a line. To create a construction line by specifying two points
Drawing Lines, Polygons and Rectangles The line is the basic object in AutoCAD. You can create a variety of lines: single lines, multiple line segments with and without arcs, multiple parallel lines, and
What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction
What s New V 11 Preferences: Reverse mouse scroll wheel zoom direction Assign mouse scroll wheel Middle Button as Fine tune Pricing Method (Manufacturing/Design) Display- Display Long Name Parameters:
Leica Geosystems HDS. Welcome to CloudWorx 4.0 Tutorial. Cyclone CloudWorx 4.0 Pro Tutorial Section II High-Definition Surveying
Welcome to CloudWorx 4.0 Tutorial Leica Geosystems HDS Cyclone CloudWorx is the high-performance point cloud solution that enables you to load, render, analyze and extract information from high-definition
CATIA: Navigating the CATIA V5 environment. D. CHABLAT / S. CARO [email protected]
CATIA: Navigating the CATIA V5 environment D. CHABLAT / S. CARO [email protected] Standard Screen Layout 5 4 6 7 1 2 3 8 9 10 11 12 13 14 15 D. Chablat / S. Caro -- Institut de Recherche
Modeling Curved Surfaces
Modeling Cylindrical and Curved Theory Views of Cylinders Contour Lines Extruded Surfaces Revolved Surfaces & Cutouts Profile Shape Axis of Revolution Swept Surfaces & Cutouts Profile Shape Path Curves
SAVEAS Saves the current drawing using a new file name, opens the newly named file and closes the drawing with the old name.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: [email protected] Phone: (919) 417-8351 Fax: (919) 573-0351 Introduction to Autocad and IntelliCAD Command List This document
SpaceClaim Introduction Training Session. A SpaceClaim Support Document
SpaceClaim Introduction Training Session A SpaceClaim Support Document In this class we will walk through the basic tools used to create and modify models in SpaceClaim. Introduction We will focus on:
IDP 150: INTRODUCTION TO AUTOCAD JANUARY TERM 2014 INSTRUCTOR: Keith A. Zaltzberg [email protected] 413-325-7968
IDP 150: INTRODUCTION TO AUTOCAD JANUARY TERM 2014 INSTRUCTOR: Keith A. Zaltzberg [email protected] 413-325-7968 OVERVIEW: Computer Aided Design (CAD ) programs offer engineers, architects, landscape
First Level: 2D Fundamentals. by Randy H. Shih Oregon Institute of Technology
AutoCAD 2008 Tutorial First Level: 2D Fundamentals by Randy H. Shih Oregon Institute of Technology MultiMedia CD by Jack Zecher Indiana University Purdue University Indianapolis SDC PUBLICATIONS Schroff
How To Draw In Autocad
DXF Import and Export for EASE 4.0 Page 1 of 9 DXF Import and Export for EASE 4.0 Bruce C. Olson, Dr. Waldemar Richert ADA Copyright 2002 Acoustic Design Ahnert EASE 4.0 allows both the import and export
Layout Tutorial. Getting Started
Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by
SDC. Schroff Development Corporation WWW.SDCACAD.COM PUBLICATIONS. MultiMedia CD by Jack Zecher
MultiMedia CD by Jack Zecher An audioi/visual presentation of the tutorial exercises SDC PUBLICATIONS Schroff Development Corporation WWW.SDCACAD.COM AutoCAD 2002 Tutorial 2-1 Lesson 2 Geometric Construction
CATIA Functional Tolerancing & Annotation TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Functional Tolerancing and Annotation...2 Pull-down Menus...3 Insert...3 Functional Tolerancing and Annotation Workbench...4 Bottom Toolbar Changes...5 3D Grid Toolbar...5
SolidWorks: Mirror, Revolve, and. Introduction to Robotics
SolidWorks: Mirror, Revolve, and Circular Pattern Introduction to Robotics Let s Review At this point we have learned the following: Extrude Boss/Base Extruded Cut Adding Relations and Dimensions Linear
This is a preview of the book "QCAD - An Introduction to Computer-Aided Design (CAD)" QCAD. An Introduction to ComputerAided Design (CAD)
QCAD An Introduction to ComputerAided Design (CAD) Andrew Mustun Table of Contents Introduction Part I: First Steps with QCAD Introducing the QCAD Application 8 15 16 The First Start 16 The Application
CONSTRUCTION SPECIFICATIONS
CONSTRUCTION SPECIFICATIONS Closets Closets Typical Cabinet Construction Specification Frame & Frameless Construction Create New Assembly Construction Methods Create New Drawer/Roll Out Construction Methods
Autodesk Fusion 360: Assemblies. Overview
Overview In this module you will learn how different components can be put together to create an assembly. We will use several tools in Fusion 360 to make sure that these assemblies are constrained appropriately
Producing 2D Documentation from 3D Models in AutoCAD
Producing 2D Documentation from 3D Models in AutoCAD David Cohn 4D Technologies AC4689 Modeling in 3D is fine, but eventually you need to produce 2D drawings. In this class, you will learn about tools
Part Number: PMT1080-ENG Rev. 1
2010 Dassault Systèmes, All Rights Reserved DraftSight and the DraftSight logos are trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other brand or product names are
Learning Autodesk. Modeling, Analysis and Animation SDC. Randy H. Shih. Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.
Learning Autodesk Inventor 2012 Modeling, Analysis and Animation Randy H. Shih SDC Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Visit the following
Inventor. Keyboard Shortcuts
Keyboard Shortcuts Inventor shortcut keys, or keyboard shortcuts, allow you to access certain tools by pressing a single key or a key combination. Many shortcut keys correspond to command aliases. keys
SketchUp Instructions
SketchUp Instructions Every architect needs to know how to use SketchUp! SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially
Allplan 2016. New Features in Allplan 2016-0
Allplan 2016 New Features in Allplan 2016-0 This documentation has been produced with the utmost care. Allplan GmbH and the program authors have no liability to the purchaser or any other entity, with
K e y b o a r d s h o rt c ut s
Keyboard shortcuts Mouse navigation Middle button (wheel) Click + drag = pan Double-click = re-center view Left button Click = tool operation Click + spacebar = pan Shift + click + drag = multi-select
AutoCAD 2015 and AutoCAD LT 2015. Essentials
AutoCAD 2015 and AutoCAD LT 2015 Essentials AutoCAD 2015 and AutoCAD LT 2015 Essentials Scott Onstott Senior Acquisitions Editor: Willem Knibbe Development Editor: Candace English Technical Editor: Ian
Drawing a Bedroom Floorplan
Appendix A Drawing a Bedroom Floorplan In this chapter, you will learn the following to World Class standards: Draw a Bedroom Floorplan Draw the Bedroom Walls Draw and Dimension the Bedroom Door Draw and
Layouts, Plotting, Printing
Layouts, Plotting, Printing Sacramento City College Engineering Design Technology Layouts, Plotting, Printing 1 Objectives Print and plot a drawing. Set up layouts using title blocks and viewports. Create
An introduction to 2D AutoCAD
An introduction to 2D AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA Contents: 1 Introduction.... 3 1.1 What is AutoCAD?... 3 1.2 The interface.... 3 1.3 Saving your
AutoCAD 3D Tutorials
AutoCAD 2013 3D Tutorials By Kristen S. Kurland C o p y r i g h t 2 0 1 2 AutoCAD is a registered trademark of Autodesk, Inc. - 1 - AutoCAD 3D Chapter 1 3D Interface - 2 - 1.1 Launch AutoCAD 1. Choose
SE OF THE PROGRAM...5
MyHatch User guide PREFACE... 2 GOAL OF THE SOFTWARE... 2 DEFINITION OF HATCHES IN AUTOCAD... 2 MYHATCH PROGRAM... 2 DEFINITION OF HATCH PATTERNS... 3 USE OF THE PROGRAM... 5 INSTALLATION... 5 TOOLBAR
Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional.
Workspace tour Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional. In this tutorial, you will become familiar with the terminology and workspace
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
Understand the Sketcher workbench of CATIA V5.
Chapter 1 Drawing Sketches in Learning Objectives the Sketcher Workbench-I After completing this chapter you will be able to: Understand the Sketcher workbench of CATIA V5. Start a new file in the Part
Building Visualization using Autodesk VIZ
Building Visualization using Autodesk VIZ The biggest mistake is thinking that one must make a complete 3D model. One approach to visualization is to take a cue from Hollywood building only what is required
PRACTICAS DE AUTOCAD LIMAC 1 PRACTICE CHAIR
PRACTICAS DE AUTOCAD LIMAC 1 PRACTICE CHAIR PRACTICAS DE AUTOCAD LIMAC 2 Setting Up for 3D Entiles Make or verify the setting shown in the chair drawing settings thable Command: VPOINT enter a view point
Sketcher. Preface What's New? Getting Started Basic Tasks Customizing Workbench Description Glossary Index
Sketcher Preface What's New? Getting Started Basic Tasks Customizing Workbench Description Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version 5 Sketcher application makes
Tutorial - First Level: 2D Fundamentals
AutoCAD 2013 Prepares you for the Autodesk Certified Associate Exam Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia DVD SDC PUBLICATIONS Schroff Development Corporation Better Textbooks.
DWFTM. Tips &Tricks. Publish View & Print Review & Mark Up
DWFTM Tips &Tricks Publish View & Print Review & Mark Up Sharing complex design information has never been easy. Since design files are large, sending sheet sets and 3D models to printers or sharing work
LEAVING CERT DCG SCHEME OF WORK
2010-11 LEAVING CERT DCG SCHEME OF WORK ST OLIVER S COMMUNITY COLLEGE Mission statement The technology department aspires to provide a safe, stimulating environment where all students can develop their
Site Analysis / Research. STEP 1: In Illustrator open your class-02 file _ go to the main menu File _ Export
Site Analysis / Research STEP 1: In Illustrator open your class-02 file _ go to the main menu File _ Export STEP 2: from the Export window set the Save as Type to: AutoCAD Drawing (*DWG) _ Save the file
PTC Creo Elements/Direct Comparison. Modeling Version
PTC Creo Elements/Direct Comparison Modeling Version Formerly CoCreate PTC Creo Elements/Direct Modeling is the world s #1 direct 3D CAD system. This table highlights the primary product capabilities delivered
TurboCAD Architectural
TurboCAD Architectural Version 15 Getting Started Guide IMSI/Design LLC, US 100 Rowland Blvd. Novato. CA 94945, USA Tel: +1-415-878-4000 Fax: +1-415-897-2544 Web Site www.imsisoft.com www.turbocad.com
10.0-2. Finite Element Modeling
What s New in FEMAP FEMAP 10.0 and 10.0.1 include enhancements and new features in: User Interface on page 3 Meshing on page 23 Mesh Associativity on page 33 Properties on page 33 Functions on page 35
Civil 3D 2009 New Features
Civil 3D 2009 New Features User Interface Workspaces and menus Menu Browser Using the large icon in the upper left corner of your screen, you can access all menus and also search for any command, recent
Autodesk Certification Exam Guide AutoCAD 2010
Autodesk Certification Exam Guide AutoCAD 2010 Preparation Guide for AutoCAD 2010 Certified Associate and AutoCAD 2010 Certified Professional Certification Exams. This guide is intended as a resource in
Wireframe and Surface
Wireframe and Surface Preface What's New Getting Started Basic Tasks Workbench Description Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version 5 Wireframe and Surface allows
Advanced Surface Modeling
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. ll rights reserved. Chapter dvanced Modeling Learning Objectives fter completing this chapter, you will be able
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
OBJECTIVES. Computeraided. Drafting and Design. Drafting vocabulary
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. 50 Exploring Drafting Chapter 7 Computer-Aided Drafting and Design 5 7 Computer-Aided Drafting
Datum > Curve KIM,ME,NIU
Datum > Curve Intersect First create at least one quilt on the surface of the model. Feature > Surface (> New) > Copy (do not use offset that creates a surface off the solid surface even with zero offset)
Chapter 9. Editing Features. Learning Objectives
Chapter 9 Editing Features Learning Objectives After completing this chapter, you will be able to: Edit features. Edit sketches of the sketch based features. Edit the sketch plane of the sketch based features.
Smart Board Notebook Software A guide for new Smart Board users
Smart Board Notebook Software A guide for new Smart Board users This guide will address the following tasks in Notebook: 1. Adding shapes, text, and pictures. 2. Searching the Gallery. 3. Arranging objects
SolidWorks. SolidWorks Teacher Guide. and Student Courseware
SolidWorks SolidWorks Teacher Guide and Student Courseware SolidWorks Corporation Outside the U.S.: +1-978-371-5011 300 Baker Avenue Fax: +1-978-371-7303 Concord, Massachusetts 01742 USA Email: [email protected]
Publisher 2010 Cheat Sheet
April 20, 2012 Publisher 2010 Cheat Sheet Toolbar customize click on arrow and then check the ones you want a shortcut for File Tab (has new, open save, print, and shows recent documents, and has choices
CATIA for Design and Engineering. Version 5 Releases 14 & 15. David S. Kelley. Central Michigan University SDC
CATIA for Design and Engineering ersion 5 Releases 4 & 5 David S. Kelley Central Michigan University SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com TUTORIAL Extruded
Basic 2D Design Be sure you have the latest information!
Basic 2D Design mastercam x getting started tutorials Basic 2D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document was published.
Chapter 1 What's New in Inventor 2013... 1
Contents Chapter 1 What's New in Inventor 2013................... 1 User Interface................................ 1 Help Experience........................... 1 Welcome screen............................
American National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
AutoDWG DWGSee DWG Viewer. DWGSee User Guide
DWGSee User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee After you install
FDOT Plans Production Tools
FDOT State Kit for AutoCAD Civil 3D Mike Racca CADD APPLICATIONS SUPPORT Florida Department of Transportation (ECSO) Email: [email protected] Phone: 850-245-1631 GENERAL Civil 3D Plan Production
Getting Started With DraftSight A Guide For AEC Users
Getting Started With DraftSight A Guide For AEC Users DraftSight.com Facebook.com/DraftSight Welcome to DraftSight a valuable tool for any AEC professional! DraftSight is more than a free, professional-grade
UNIVERSITY OF NEW SOUTH WALES FACULTY OF THE BUILT ENVIRONMENT TUTORIAL INTRODUCTIONS TO CAD
C5 UNIVERSITY OF NEW SOUTH WALES FACULTY OF THE BUILT ENVIRONMENT TUTORIAL INTRODUCTIONS TO CAD AutoCAD 2000 in 3D - A Monkish Shot Tower Jim Plume As you are probably aware, the traditional technology
Microsoft Excel 2010 Charts and Graphs
Microsoft Excel 2010 Charts and Graphs Email: [email protected] Web Page: http://training.health.ufl.edu Microsoft Excel 2010: Charts and Graphs 2.0 hours Topics include data groupings; creating
Drawing a little mechanical part using LibreCAD
TUTORIAL Drawing a little mechanical part using LibreCAD Tutorial by Claudio Guarnieri CLAUDIO GUARNIERI: Drawing a little mechanical part using LibreCAD Page 1 of 17 Introduction Hello everyone! This
Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics.
Importing 3D models Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. In this tutorial, you will modify a three-dimensional model of a transmission
SimLab 3D PDF. Settings
SimLab 3D PDF Settings 3D PDF Settings PDF Settings dialog enables the user to control the exported 3D PDF file(s), from SimLab Composer and other 3D SimLab plugins. In SimLab Composer the dialog can be
AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook
2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management