The Hong Kong Polytechnic University

Transcription

1 The Hong Kong Polytechnic University Faculty of Engineering An Opportunity to Earn Two Master s Degrees in One Year A concurrent enrolment program leading to a Master of Science (MSc) degree awarded by The Hong Kong Polytechnic University; and a Master of Engineering (MEng) degree awarded by University of Cincinnati in the U.S. state of Ohio@ 1. Introduction 1.1 The Faculty of Engineering (FENG) of PolyU and The University of Cincinnati (UC) College of Engineering & Applied Science (CEAS) jointly deliver a concurrent enrolment program allowing credit transfers between FENG and CEAS and contributing to the award of a Master of Science (MSc) degree from PolyU and a Master of Engineering (MEng) degree from UC. 1.2 Under the arrangement, students joining the following PolyU programs in and beyond can apply to enroll concurrently for a Master of Engineering (MEng) program offered by UC. Postgraduate Scheme in Engineering (Code: 05002) Postgraduate Scheme in Computing (Code: 61030) MSc in Biomedical Engineering (Code: 47002) 2. Admissions requirements for the University of Cincinnati 2.1 To be eligible for admissions to UC, students must have a bachelor s degree in a corresponding engineering program recognized as high quality by UC, and graduate with a minimum GPA of 3.0 or QPA of 75 % or equivalent. No GRE is required. Students also have to satisfy the minimum English Language requirement as follows: (i) A Test of English as a Foreign Language (TOEFL) score of 85 for the Internet-based test; OR (ii) An overall Band Score of at least 6.5 in the International English Language Testing System (IELTS), OR (iii) A Pearson Test of English (PTE) score of 59. 1

2 2.2 Students who have received a baccalaureate or higher degree with English as the medium of instruction are exempt from the English proficiency requirement. 3. Structure of the PolyU-MSc and UC-MEng programs 3.1 The UC-MEng degree requires a minimum of 30 credits (including a capstone project as described under para. 3.2 below); a thesis is not mandatory. Likewise, the PolyU-MSc degree requires a minimum of 30 credits (including the requisite number of compulsory/core subjects stipulated for individual awards); a thesis is not mandatory. Both programs are designed to provide students with advanced knowledge and experience in their fields of interests along with subjects covering new developments in the respective disciplines. 3.2 A key component of the UC-MEng programs is a capstone project which carries 3 credits. It can be a written paper, project with an advisor, or a curricular practical training (internship) in the student s field of study. The project can be undertaken at UC or PolyU, business workplace, industry, or a government institution. The capstone project provides a mechanism to demonstrate a synthesis of knowledge and application of concepts to a specific problem. Academic staff members or professionals in the workplace will oversee the capstone experience. The capstone project will include a written report and a presentation. 3.3 For the award of the UC-MEng, students must have completed a minimum of 15 credits (nominally 5 courses) at UC which includes the capstone project. Up to 15 credits earned from the PolyU-MSc (with a cumulative GPA of 3.0 or above on the 5 subjects and a minimum of Grade C for each subject) can be credit-transferred toward the UC-MEng. 3.4 For the award of the PolyU-MSc, students must have completed a minimum of 5 subjects (15 credits) at PolyU which include three compulsory/core subjects specified for the MSc award concerned. Up to 15 credits earned from the UC-MEng (with a cumulative GPA of 3.0 or above on the 5 subjects and a minimum of Grade C for each subject) can be credit-transferred toward the PolyU-MSc. Besides, for students enrolling on the Postgraduate Scheme in Engineering, they must complete a minimum of 6 subjects at PolyU if they are to be considered for the award of a Distinction for their PolyU-MSc. 3.5 Typical study pattern for FENG students admitted to the program The structure of the program is such that typical FENG students will complete their first semester at FENG to earn 15 or more credits from FENG. In the second (Spring) semester, students will enroll in UC to complete 15 or more credits (including the capstone project). Students will be awarded the UC-MEng if the total recognized credits earned from FENG and CEAS are no less than 30 credits. The minimum of 15 credits of the UC-MEng must be completed as a matriculated CEAS student. These students can also be awarded the PolyU-MSc once they satisfy the degree award requirements at FENG if their subjects studied at CEAS are credit-transferred back to FENG. 3.6 Upon completion of no less than 30 credits from FENG and CEAS, and subject to satisfying the academic regulations of the programs/universities concerned, students can 2

3 qualify for two master s degrees; one from PolyU (MSc) and one from UC (MEng) in the following disciplines. Both degrees are recognized by the Ministry of Education in China. PolyU-MSc awards Biomedical Engineering E-Commerce Electrical Engineering* Electronic and Information Engineering* Information Systems Information Technology Mechanical Engineering* Technology Management Software Technology *and the various specialism of study options UC-MEng awards Aerospace Engineering Biomedical Engineering Civil Engineering* Chemical Engineering* Computer Engineering Computer Science Electrical Engineering Environmental Engineering or Environmental Science Materials Science Engineering* Mechanical Engineering *not yet available for the academic year 3.7 Students do not need to obtain the PolyU-MSc before they qualify for the UC-MEng, and vice versa. For example, a student can obtain the PolyU-MSc by studying 5 subjects at PolyU and credit transfer 5 subjects from UC, irrespective of whether he/she has obtained the UC-MEng. 3.8 Table 1 depicts the program structure of the PolyU-MSc and UC-MEng under this concurrent enrolment program. Credit Requirement Requirement for dissertation/thesis Maximum number of transferrable credits earned from PolyU/UC Other requirements PolyU MSc degree 30 credits (i.e. 10 subjects) optional 15 credits earned from UC which are recognized for credit transfer to the respective PolyU-MSc as presented in Annex 1. (Attain a cumulative GPA of 3.0 or above on the 5 subjects taken at UC and a minimum of Grade C for each subject) (a) A minimum of FIVE subjects must be taken at PolyU which include THREE compulsory/ Core subjects specified for the award concerned. 3 UC-MEng degree 30 credits (i.e. 10 subjects) optional 15 credits earned from PolyU which are recognized for credit transfer to the respective UC- MEng as presented in Annex 2. (Attain a cumulative GPA of 3.0 or above on the 5 subjects taken at PolyU and a minimum of Grade C for each subject) A minimum of FIVE subjects (15 credits) must be taken at UC as a matriculated CEAS student which includes the capstone project as described in para. 3.2

4 PolyU MSc degree (b) To be considered for the award of a Distinction for the MSc awards hosted under the Postgraduate Scheme in Engineering, students must have completed no less than 6 subjects (18 credits) at PolyU. UC-MEng degree above.) 3.9 Students should refer to the individual program document for the detailed program structure and award requirements of the respective PolyU-MSc and UC-MEng programs Subjects taken at PolyU-MSc which are recognized for credit transfer to the respective UC-MSc programs are shown in Annex 2. Subjects taken at UC-MEng which are recognized for credit transfer to the respective PolyU-MSc programs are shown in Annex Application procedures 4.1 PolyU is the administrative host of this concurrent enrolment program and FENG students interested in this program need to apply to UC through FENG. In September every year, FENG will invite applications and nominate applicants to UC based on their first degree or other equivalent qualifications. 4.2 While studying at both Universities, students will be required to comply with all the regulations and requirements of each institution and be subject to any authorized changes to those regulations such as fees adjustments, etc. 4.3 Applications to the concurrent enrolment program should be submitted via a standard form. Details would be announced in September each year. 5. Tuition Fees 5.1 Students in the concurrent enrollment program will be charged PolyU tuition and fees while they are at FENG. When students register for subjects offered by CEAS, they have to pay out-of-state tuition and fees while they are at UC. 5.2 PolyU and CEAS reserve the right to change their tuition and fees for any component of the program. Students already progressing through the program may experience a change of fees in line with changes affecting all other students at their respective universities. 5.3 PolyU students, while at UC, are responsible for tuition and fees, room and meal costs, travel, health and accident insurance, books and supplies, and incidental expenses. 4

5 5.4 All students while at UC must purchase UC health insurance. The cost of that coverage is added to the student s bill. 5.5 For students who apply for on-campus housing, the UC Office of Housing and Food Services requires payment of a deposit at the time a student applies for housing and a dining plan. Application for housing and dining and payment of the deposit should take place well in advance of arrival at UC. The cost of housing and dining plan depends upon options selected by each student. Payment of the deposit can be made by credit card or by check. The UC Office of Housing and Food Services will submit an invoice to each student prior to the start of the semester. Payment is due in full when classes begin. Payments for housing and dining are to be made directly to the University of Cincinnati. On-campus housing cannot be guaranteed. Early application is critical. 5.6 Tuition fee paid for subjects taken at PolyU is based on the number of credits taken. In 2014/15, the tuition fee is HK$4,000 per credit or HK$ 12,000 for a 3-credit subject for non-local students. For local students, it ranges from HK$2,700 to HK$3,300 per credit depending on the program students have enrolled. Detailed information on tuition and other fees related to studying abroad at CEAS will be provided by UC. The following is given for students reference only: Cost of studying at UC (US$) Spring semester at UC $14,673 tuition and fees ( $5,466 MEng scholarship) = $9,207* Approximately $5,000 - $6,000 room and board Some students will elect to stay and do an internship in the summer. Costs same as spring semester, but larger scholarship - $14,673 tuition and fees ( $10,468 MEng scholarship) = $4,205* * tuition and fees, not including cost of University of Cincinnati is a public institution that was founded in It has a total undergraduate enrollment of 21,598 and its setting is urban. It utilizes a semester-based academic calendar. University of Cincinnati's ranking in the 2014 edition of Best Colleges is National Universities, Note: Information presented in this document is subject to changes without prior notification. September

6 Annex 1 Subjects taken at UC-MEng which are recognized for credit transfer to the respective PolyU-MSc Program: MSc Biomedical Engineering PolyU subjects contributed to MSc BME BME5051 Molecular and Functional Imaging: From Body System to Molecules Equivalent subjects in UC MEng s (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) BME6011 Magnetic Resonance Imaging and Spectroscopy Or BME6010 Biomedical Ultrasound BME6065 Biomedical Materials BME5124 Biomaterials and Tissue Engineering BME5127 Nanobiotechnology CHE Molecular Engineering of Functional Nanomaterials BME5151 Intellectual Property, Standards and Regulations of Medical Devices AEEM Entrepreneurship and Technology Law Or EGFD6067 -Entrepreneurship and Technology Law BME5115 Applied Biosignal Processing BME6012 Biomedical Signal and Image Processing BME5126 Clinical Biomechanics BME6024 Joint Biomechanics and Measurement Methods Or MECH6085 Fundamentals of Biomechanics BME5134 Rehabilitation Engineering BME5158 Advanced Topics in Health Technology (independent study) BME5155 Research Methods & Biostatistics BME7061 Biostatistics in Research 1

7 Program: MSc Scheme in Computing Equivalent subjects in UC MEng s PolyU subjects contributed to MSc COMP COMP5111 Database Systems and Management COMP5121 Data Mining and Data Warehousing Applications COMP5122 E-Commerce Fundamentals and Development COMP5123 Intelligent Information Systems COMP5131 Introduction to Information Systems COMP5132 Information Systems Acquisition and Integration COMP5133 Information Systems and E- Commerce Strategy COMP5134 IS Development with OO Methods COMP5135 Information Systems Audit and Control COMP5136 B2B & B2C E-Commerce and Management COMP5138 Services Science Management COMP5139 Management Information Systems COMP5151 Advanced Database Systems (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) CS 6051 Database Theory CS 6051 Database Theory COMP5211 Software Engineering Concepts COMP5212 Software Design and Architecture COMP5220 IS Project Management COMP5221 Software Project Management COMP5222 Software Testing and Quality Assurance COMP5223 Middleware and Distributed Objects COMP5224 Software Requirement Analysis and Specification COMP5225 Software Evolution and 2

8 Equivalent subjects in UC MEng s PolyU subjects contributed to MSc COMP Maintenance COMP5226 Software Infrastructure and Configuration Management COMP5228 Embedded Software Engineering COMP5229 Enterprise Applications and Systems Management COMP5232 IT Outsourcing and Auditing COMP5252 Extreme ming and Agile Software Development COMP5311 Internet Infrastructure and Protocols COMP5321 Enterprise Web and Internet Computing for Managers COMP5322 Internet Computing and Applications COMP5323 Web Database Technologies and Applications COMP5324 Internet Information Retrieval COMP5325 Distributed Computing COMP5326 Wireless Computing Systems and Applications COMP5328 Data Center Fundamentals COMP5331 Web Advertising and Web Publishing COMP5332 Web Services and Project Development COMP5351 Internet Infrastructure Security COMP5353 Internet Security: Principles and Practice COMP5411 Fundamentals of Operating Systems COMP5412 Fundamentals of Chinese Computing COMP5414 Computer Architecture (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) CS 6054 Information Retrieval CS 6097 Wireless & Mobile Networks EECE 6029 Operating Systems EECE 7095 Introduction to Computer 3

9 Equivalent subjects in UC MEng s PolyU subjects contributed to MSc COMP COMP5422 Multimedia Computing, Systems and Applications COMP5511 Artificial Intelligence Concepts COMP5512 Information Technology and Logistics COMP5513 Financial Computing COMP5514 Computer Image Generation and Applications COMP5515 Image and Video Computing COMP5517 Human Computer Interaction COMP5522 Biometric Authentication: System and Application COMP5524 Workflow Management and Collaborative Systems COMP5525 Information Security: Technologies and Systems COMP5527 Mobile Computing and Data Management COMP5531 IT Entrepreneurship and Legal Aspects at IT COMP5536 Knowledge Management and Applications COMP5538 Customer Relationship Management and Technology COMP5552 Computer Ethics COMP5923 Independent Study (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) Architecture CS 6033 Artificial Intelligence CS 6067 User Interface I COMP5933 Project (6 credits) COMP5940 Dissertation (9 credits) 4

10 UC MEng subjects recognized as core subjects or elective subjects The following UC subjects will be added to the core and elective subject list of MSc COMP (ST) The following UC subjects will be added to the core and elective subject list of MSc COMP (IT) The following UC subjects will be added to the core and elective subject list of MSc COMP (IS) The following UC subjects will be added to the core and elective subject list of MSc COMP (EC) EECE 6010 Database Management Theory (Core) EECE 6010 Database Management Theory (Core) EECE 6010 Database Management Theory (Elective) EECE 6026 Intro to Communication Systems (Elective) EECE 6026 Intro to Communication Systems (Elective) EECE 6029 Operating Systems (Core) EECE 6083 Compiler Theory and Practice (Core) EECE 7095 Introduction to Computer Architecture (Core) CS 6033 Artificial Intelligence (Core) CS 6033 Artificial Intelligence (Elective) CS 6033 Artificial Intelligence (Elective) CS 6037 Machine Learning (Core) CS 6037 Machine Learning (Core) CS 6051 Database Theory (Core) CS 6051 Database Theory (Core) CS 6051 Database Theory (Elective) CS 6052 Intelligent Data Analysis (Elective) CS 6052 Intelligent Data Analysis (Elective) CS 6052 Intelligent Data Analysis (Elective) 5

11 UC MEng subjects recognized as core subjects or elective subjects The following UC subjects will be added to the core and elective subject list of MSc COMP (ST) The following UC subjects will be added to the core and elective subject list of MSc COMP (IT) The following UC subjects will be added to the core and elective subject list of MSc COMP (IS) The following UC subjects will be added to the core and elective subject list of MSc COMP (EC) CS 6054 Information Retrieval (Elective) CS 6054 Information Retrieval (Elective) CS 6054 Information Retrieval (Core) CS 6060 Computer Graphics (Elective) CS 6060 Computer Graphics (Elective) CS 6067 User Interface I (Core) CS 6067 User Interface I (Elective) CS 6067 User Interface I (Elective) CS 6067 User Interface I (Elective) CS 6068 Parallel Computing (Core) CS 6068 Parallel Computing (Elective) CS 6097 Wireless & Mobile Networks (Core) CS 6097 Wireless & Mobile Networks (Core) CS 6097 Wireless & Mobile Networks (Core) CS 7092 Sensor Systems (Elective) CS 7092 Sensor Systems (Elective) CS 8021 Pattern Recognition (Elective) CS 8021 Pattern Recognition (Elective) CS 7081 Adv. Algorithms I (Elective) CS 7081 Adv. Algorithms I (Elective) 6

12 Program: MSc Electrical Engineering Equivalent subjects in UC MEng s PolyU subjects contributed to MSc EE EE501 Alternative Energy Technologies EE502 Modern Protection Methods EE505 Power System Control and Operation EE509 High Voltage Engineering EE510 Electrical Traction Engineering EE512 Electric Vehicles EE514 Real Time Computing EE517 Fibre Optic Components EE520 Intelligent Motion Systems EE521 Industrial Power Electronics EE522 Optical Fibre Systems EE524 Open Electricity Market Operation EE525 Energy Policy and Restructuring of Electricity Supply Industry EE526 Power System Analysis and Dynamics EE527 Auto-Tuning for Industrial Processes EE528 System Modelling and Optimal Control EE529 Power Electronics for Utility Applications EE530 Electrical Energy-saving Systems EE533 Railway Power Supply Systems EE535 Maintenance and Reliability Engineering EE536 Signalling and Train Control System EE537 Railway Vehicles EE539 Aerospace Power Electronics and Actuation Systems EE550 Enterprise Risk and Asset Management EE551 Principles of Photonics and Optical Systems (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) EECE 6036 Intelligent Systems CVE 6022C Traffic Control and Signal System Design EECE 6048 Optics for Enginers 7

13 Equivalent subjects in UC MEng s PolyU subjects contributed to MSc EE EE560 Metros in Hong Kong and China EE570 Design and Analysis of Smart Grids EE5381 System Assurance & Safety in Railways (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) 8

14 The following UC subjects will be added to the core subject list of MSc EE EECE 6048 Optics for Enginers EECE 6008 Fundamentals of MEMS EECE 6018 Microfabrication of Semiconductor Devices EECE 6028 Into to Nanoelectronics EECE 6019 Probability and Random Processes EECE 6026 Intro to Communication Systems EECE 6036 Intelligent Systems EECE 7033 Linear Systems Theory EECE 6080C Introduction VLSI Design EECE 6082C VLSI Design for Test and UC MEng subjects recognized as core subjects The following UC subjects will be added to the core subject list of MSc EE (EPS) 9 The following UC subjects will be added to the core subject list of MSc EE (PED) EECE 6024 Introduction to Digital Signal Processing CS 7092 Sensor Systems The following UC subjects will be added to the core subject list of MSc EE (RS) CVE 6041 Project Management Functions CVE 6022C Traffic Control and Signal System Design CVE 6010C Advanced Traffic Engineering CVE 6024 Highway Engineering and Traffic Safety CVE 6012 Travel Demand Forecasting and Environmental Analysis CVE 6008 Transportation Planning and System Evaluation CVE7074 Traffic Flow Theory and Network Modeling CVE7076 Intelligent Transportation Systems: Integrated Planning and Technologies

15 The following UC subjects will be added to the core subject list of MSc EE Power EECE 6086C VLSI Design Automation UC MEng subjects recognized as core subjects The following UC subjects will be added to the core subject list of MSc EE (EPS) The following UC subjects will be added to the core subject list of MSc EE (PED) The following UC subjects will be added to the core subject list of MSc EE (RS) 10

16 Program: MSc Electronic and Information Engineering Equivalent subjects in UC MEng s PolyU subjects contributed to MSc EIE EIE509 Satellite Communications - Technology and Applications EIE511 VLSI System Design EIE522 Pattern Recognition: Theory & Applications EIE528 Digital Data Transmission EIE529 Digital Image Processing EIE531 Mobile Radio Communications EIE541 Digital Signal Processing EIE545 Consumer Electronics EIE546 Video Technology EIE552 Internet Technologies for Multimedia Applications EIE553 Security in Data Communication EIE555 Personal Networking Technology EIE556 Advanced DSP for Multimedia Communications EIE557 Computational Intelligence and its Applications EIE558 Speech Processing and Recognition EIE563 Digital Audio Processing EIE565 Advanced Multimedia Technology EIE574 High Frequency Circuit Design EIE575 Vehicular Communications and Inter- Networking Technologies EIE576 Information Technology in Biomedicine EIE577 Optoelectronic Devices EIE579 Advanced Telecommunication Systems (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) EECE 6080C Introduction VLSI Design CS 8021 Pattern Recognition EECE 6026 Intro to Communication Systems EECE 6024 Introduction to Digital Signal Processing CS 6037 Machine Learning 11

17 Equivalent subjects in UC MEng s PolyU subjects contributed to MSc EIE EIE580 Radio Frequency and Microwave Integrated Circuits for Communication System Applications EIE581 Optical Wavelength Division Multiplexing Networks EIE583 Advanced Power Semiconductor Devices and Design Criteria for Applications EIE585 OFDM & MIMO Wireless Communications EIE586 The Commercial Environment for Engineers EIE587 Channel Coding EIE589 Wireless Data Network EIE591 Emerging Technologies for Next Generation Circuits and Systems (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) The following UC subjects will be added to the core subject list of MSc EIE EECE6019 Probability and Random Processes EECE6082C VLSI Design for Test and Power EECE6086C VLSI Design Automation EECE6018 Microfab of Semiconductor Devices EECE6028 Intro to Nanoelectronics EECE6080C Intro to VLSI Design EECE6026 Intro to Communication Systems CS6037 Machine Learning UC MEng subjects recognized as core subjects The following UC subjects will be added to the core subject list of MSc EIE (MSPC) BME6012 Biomedical Signal and Image Processing EECE6024 Intro to Digital Signal Processing CS8021 Pattern Recognition CS6097 Wireless & Mobile Networks 12

18 Program: MSc Mechanical Engineering Equivalent subjects in UC MEng s PolyU subjects contributed to MSc ME ME534 Engineering Acoustics ME536 Vibration and Structure-borne Noise ME540 Fuels and Engines ME548 Computer Aided Product Analysis ME552 Integrated Engineering Design ME556 Advanced Combustion Systems ME557 CFD & Thermo-fluid System Design ME558 Advanced Materials and Structural Design ME559 Advanced Environmental and Transportation Noise Control ME564 Principles and Design of Air Pollution Control Devices ME565 Prevention and Control of Vehicular Emission ME566 Industrial and Environmental Measurement Technology ME567 Advanced Control Technology ME569 Thermal System Design and Management ME570 Advanced Product Mechatronics ME571 Corrosion Control ME572 Design for Sustainable Development ME573 Project on Product Design and Management ME574 Product Noise Control ME575 Thermal Radiation Heat Transfer (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) MECH 6066 Acoustics AEEM 6011 Combustion AEEM 6041 Comp Flow & Thermodyn AEEM 6015 Modern Control MTEN 6060 Corrosion MECH 6075 Production Planning & Control 13

19 Equivalent subjects in UC MEng s PolyU subjects contributed to MSc ME ME576 Turbulent Flows and Aerodynamics (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) ME577 Advanced Aircraft Structures ME578 Aircraft Design ME579 Aircraft Noise and Aeroacoustics ME583 Advanced Avionics Systems ME584 Airworthiness and Maintenance ME585 Human Factors in Aircraft Maintenance ME586 Operations Research in Aviation ME588 Heat Transfer in Modern Gas-Turbine Engines ME589 Aerodynamics in Modern Gas-Turbine Engines 14

20 The following UC subjects will be added to the core subject list of MSc ME UC MEng subjects recognized as core subjects The following UC subjects will be added to the core subject list of MSc ME (AE) AEEM 6011 Combustion AEEM 6015 Modern Control AEEM 6041 Comp Flow & Thermodyn AEEM 7074 Advanced Finite Element Methods AEEM 8030 Advanced Propulsion MTSC 7010C Advanced Material Techniques MTSC 7035 Advanced Thermodynamics MTEN 6060 Corrosion (ME) MECH 6011 Computational Design MECH 6032 Robot Control and Design MECH 6066 Acoustics MECH 6075 Production Planning & Control MECH 6096 Internal Combustion Engines MECH 7053 Advanced FEM MECH 7064 Advanced System Dynamics MECH 7090 Conduction Heat Transfer MECH 7091 Convection Heat Transfer The following UC subjects will be added to the core subject list of MSc ME (ANPM) The following UC subjects will be added to the core subject list of MSc ME (Aviation) The following UC subjects will be added to the core subject list of MSc ME (PDA) 15

21 Program: MSc Technology Management ISE549 ISE559 ISE5001 PolyU subjects contributed to MSc MTM Management of Innovation and Technology Technology Audit and Assessment Technology Transfer and Commercialisation COMP5538 Customer Relationship Management and Technology ISE520 Manufacturing Strategy ISE525 ISE526 ISE531 ISE553 ISE554 ISE5002 ISE5018 Global Operations and Logistics Management Enterprise Resources Planning Principles of Knowledge Engineering and Management Managing Six Sigma Systematic Innovation for Product Development Field Study of Technology Organisations Intellectual Property Management and Strategies Equivalent subjects in UC MEng s (i.e. mutual exclusions of PolyU subjects on the left-hand column. If students take subjects which are mutually exclusive to each other, only one of them will count towards the MSc award ) ISE5021 Technology Project Management ENGR6014 Eng Project Management ISE5022 ISE5601 Financial Decision Analysis for Technology Management Managing and Measuring Intellectual Capital 16

22 UC MEng subjects recognized as core subjects The following UC subjects will be added to the core subject list of MSc MTM Engineering Economic Analysis MECH6074 Quality Control ENGR 6002 Management of Professionals ENGR 6010 Effectiveness in Technical Organization MECH 6076 Supply Chain Management for Engineers MECH6075 Production Planning and Control AEEM6067 Entrepreneurship and Technology Law MECH 7070 Advanced Manufacturing Processes 17

23 Annex 2 Masters of Engineering Degree The curriculum in the Master of Engineering Program is structured to provide a foundation of advanced engineering topics while allowing students flexibility to meet their specific educational objectives. The Master of Engineering requires a minimum of 30 semester hours including: Program core courses taken by all Master of Engineering students. 2 courses required. Discipline required courses Track Courses from the discipline of interest. The number of courses varies by program; see discipline specific information on the following pages Elective courses depth or interdisciplinary focus depending on student educational objectives. The number of courses varies by program; see discipline specific information on the following pages. Capstone project demonstrates applications of skills and synthesis of knowledge. 1 course required. Students will register for the Capstone while at UC. The curriculum is meant to be fairly flexible, allowing students to pursue a broad range of interests. Some disciplines have specific courses or a set of specific courses that must be taken to satisfy the track requirements; other disciplines do not. The following pages indicate the required courses or sets of courses for the core course area and the specific tracks in each discipline. The appropriate elective courses are also described for each discipline. This document and others pertaining to the collaborative program can be found at 1

24 Program Core Courses The core curriculum is required of all Master of Engineering students, regardless of which track they pursue. The core provides skills in the effective practice of engineering recognizing that for experienced practitioners, effectiveness includes technical skills, project and task management skills, and interpersonal skills. Students are required to take 1 course from the Project / Task Management set, and 1 course from the Interpersonal set. These courses can be completed at UC or by completing an equivalent HKPU course shown below. Also shown are HPKU courses that satisfy the core course requirement Project / Task Management- 1 required UC MEng Courses MECH 6074 Quality Control F, S ENGR 6014 Eng Project Management S AEEM 6067 Entrepreneurship and Tech Law S AEEM 6099 Systems Eng & Analysis S Equivalent Subjects from HKPU ISE5021 Technology Project Management HKPU Courses That Satisfy Core Requirement ISE549 Management of Innov and Technology ISE5001 Tech Transfer and Commercialisation ISE553 Managing Six Sigma ISE5022 Financial Decision Analysis for Technology Interpersonal Skill Development 1 required UC MEng Courses ENGR 6002 Management of Professionals F, S ENGR 6010 Effectiveness in Tech Orgs F, S ENGR 6050 Fundamentals of Leadership F, S Equivalent Subjects from HKPU F offered fall semester S offered spring semester 2

25 MEng Graduate Program Curriculum - Aerospace Engineering Track Courses 4 required There are no compulsory track courses. Students are required to complete a minimum of 4 track courses from the list below. These courses can be completed at UC or by completing an equivalent HKPU course shown below. UC MEng Courses AEEM 6001 Adv Strength of Materials F AEEM 6003 Analytical Dynamics F AEEM 6010 Satellite Technology S AEEM 6011 Combustion F AEEM 6015 Modern Control F AEEM 6022 Optimal Control S AEEM 6041 Comp Flow & Thermo F AEEM 6076 Modeling Complex Systems F AEEM 6098 Unmanned Air Systems S AEEM 6099 Systems Eng Analysis S AEEM 7027 NonDestructive Test F AEEM 7035 Physics of Gases S AEEM 7050 Turbomachinery Flow F AEEM 7074 Advanced Finite Element Methods F AEEM 8030 Advanced Propulsion F EGFD 7041 Viscous Flow and Heat Transfer F EGFD 7051 Num Meth Aero Fluid Mech F Equivalent Subjects from HKPU ME556 Advanced Combustion Systems ME567 Advanced Control Technology ME557 CFD & Thermo-fluid System Design F offered fall semester S offered spring semester Elective Courses 3 required Elective courses can be selected from the table above. The following HKPU courses are also acceptable electives: ME534 Engineering Acoustics ME536 Vibration and Structure-borne Noise ME540 Fuels and Engines ME548 Computer Aided Product Analysis ME552 Integrated Engineering Design ME556 Advanced Combustion Systems ME557 CFD & Thermo-fluid System Design ME558 Advanced Materials and Structural Design ME559 Advanced Environmental and Transportation Noise Control ME567 Advanced Control Technology ME569 Thermal System Design and Management ME570 Advanced Product Mechatronics ME571 Corrosion Control 3

26 ME574 Product Noise Control ME575 Thermal Radiation Heat Transfer ME576 Turbulent Flows and Aerodynamics ME577 Advanced Aircraft Structures ME578 Aircraft Design ME579 Aircraft Noise and Aeroacoustics ME583 Advanced Avionics Systems ME584 Airworthiness and Maintenance ME585 Human Factors in Aircraft Maintenance ME586 Operations Research in Aviation ME588 Heat Transfer in Modern Gas-Turbine Engines ME589 Aerodynamics in Modern Gas-Turbine Engines 4

27 MEng Graduate Program Curriculum - Biomedical Engineering Track Courses 4 required The BME program has 3 distinct tracks. The requirement for each track is that a minimum of 12 credit hours be completed from the coursework below for that track. These courses can be completed at UC or by completing an equivalent HKPU course shown below. Medical Device Innovation & Entrepreneurship (MDIEP) Track Courses UC MEng Courses Equivalent Subjects from HKPU BME 7011 Biomechan Design of Implantable Devices F BME 7020 Advanced Medical Device Design F BME 7010 Medical Device Life Cycle Engineering S Course from another track Tissue Engineering and Biomechanics Track Courses: UC MEng Courses BME 6024 Joint Biomechan and Measurement Methods S BME 6030 Functional Tissue Engineering F BME 7021 Tissue Biomechanics F BME 8020 Independent Study in Biomechanics F, S BME 8030 Independent Study in Tissue Engineering F, S GNTD 7001 Molecular and Cellular Biology F OSE 7044C Biomechanical and Physiological Aspects of Muscular Activity F Equivalent Subjects from HKPU BME5126 Clinical Biomechanics Medical Imaging Track Courses: UC MEng Courses BME 6011 MR Imaging and Spectroscopy F BME 6012 Biomedical Signal and Image Processing F BME 6050 Biomedical Ultrasound S BME 7012 Adv Topics in Magnetic Resonance Imaging BME 8010 Independent Study in Medical Imaging F, S MP 9050Diagnostic Radiological Imaging Physics F Equivalent Subjects from HKPU BME5051 Molecular and Functional Imaging BME5115 Applied Biosignal Processing F offered fall semester S offered spring semester 5

28 Elective Courses 3 required Elective courses can be selected from the tables above. The following HKPU courses are also acceptable electives: BME5051 Molecular and Functional Imaging: From Body System to Molecules BME5124 Biomaterials and Tissue Engineering BME5127 Nanobiotechnology BME5151 Intellectual Property, Standards and Regulations of Medical Devices BME5115 Applied Biosignal Processing BME5126 Clinical Biomechanics BME5134 Rehabilitation Engineering BME5158 Advanced Topics in Health Technology (independent study) BME5155 Research Methods & Biostatistics 6

29 MEng Graduate Program Curriculum - Computer Engineering Track Courses 3 required The Computer Engineering program has two distinct tracks; the required courses for each track are listed. These courses can be completed at UC or by completing an equivalent HKPU course shown below. Computer Engineering Track Complete at least 3 of the 5 courses listed in the table below. UC MEng Courses Equivalent Subjects from HKPU EECE6010 Database Management Theory S EECE6029 Operating Systems F COMP5411 Fundamentals of Operating Systems EECE6080C Intro to VLSI Design F EIE511 VLSI System Design EECE6083 Compiler Theory and Practice S EECE7095 Intro to Computer Architecture F COMP5414 Computer Architecture VLSI Design Track Complete all courses listed below (note UC VLSI courses are all 4 credit hours, not 3) UC MEng Courses Equivalent Subjects from HKPU EECE6080C Intro to VLSI Design F EIE511 VLSI System Design EECE6082C VLSI Design for Test and Power S EECE6086C VLSI Design Automation S F offered fall semester S offered spring semester Elective courses 3 required for VLSI track; 4 required for computer engineering track Students can take any course from EECE (Electrical Engineering and Computer Engineering) at UC. The following HKPU courses are also acceptable electives: EE505 Power System Control and Operation EE514 Real Time Computing EE517 Fibre Optic Components EE522 Optical Fibre Systems EE528 System Modelling and Optimal Control EE550 Enterprise Risk and Asset Management EE551 Principles of Photonics and Optical Systems COMP5411 Fundamentals of Operating Systems COMP5414 Computer Architecture COMP5228 Embedded Software Engineering COMP5223 Middleware and Distributed Objects 7

30 MEng Graduate Program Curriculum - Computer Science Track Courses 4 required There are no compulsory courses. Students are required to complete a minimum of 4 courses from the list below. These courses can be completed at UC or by completing an equivalent HKPU course shown below. UC MEng Courses CS6027 Requirements Engineering F CS6033 Artificial Intelligence F CS6037 Machine Learning F CS6052 Intelligent Data Analysis F CS6054 Info Retrieval F CS6055 Cyberdefense Overview F CS6057 Mobile Security F CS6060 Computer Graphics 1 F CS6067 User Interface 1 F CS6068 Parallel Computing F CS6070 Automata F CS6097 Wireless & Mobile Networks F CS7035 Cryptography 1 F CS7038 Malware Analysis F CS7097 Intro Functional Genomics F CS8021 Pattern Recognition F EECE6010 Database Management F CS6025 Data Encoding S CS6026 Formal Methods S CS6043 Networking S CS6066 Cloud Computing for CS and Engineering S CS6097 Wireless & Mobile Networks S CS7081 Adv. Algorithms I S CS7083 Experimental Combinatorics S CS7092 Sensor Systems S CS7099 Intro to BioInformatics S EECE8075 Data Warehousing and Mining S Equivalent Subjects from HKPU COMP5511 Artificial Intelligence Concepts COMP5324 Internet Information Retrieval COMP5326 Wireless Computing Sys and App COMP5326 Wireless Computing Systems and Applications F offered fall semester S offered spring semester Elective Courses 3 required Elective courses can be selected from the tables above. The following HKPU courses are also acceptable electives: COMP5121 Data Mining and Data Warehousing Applications COMP5123 Intelligent Information Systems COMP5151 Advanced Database Systems COMP5221 Software Project Management 8

31 COMP5222 Software Testing and Quality Assurance COMP5223 Middleware and Distributed Objects COMP5228 Embedded Software Engineering COMP5252 Extreme Programming and Agile Software Development COMP5322 Internet Computing and Applications COMP5324 Internet Information Retrieval COMP5325 Distributed Computing COMP5326 Wireless Computing Systems and Applications COMP5411 Fundamentals of Operating Systems COMP5517 Human Computer Interaction COMP5527 Mobile Computing and Data Management 9

32 MEng Graduate Program Curriculum - Electrical Engineering Track Courses 3 required The Electrical Engineering program has three distinct tracks; the required courses for each track are listed. These courses can be completed at UC or by completing an equivalent HKPU course shown below. Devices and Materials Track Complete at least 3 of the 5 courses listed. UC MEng Courses EECE6007 Biomedical Microsystems F EECE6008 Fundamentals of MEMS F EECE6018 Microfab of Semiconductor Devices F EECE6028 Into to Nanoelectronics S EECE6048 Optics for Engineers F Equivalent Subjects from HKPU EE551 Principles of Photonics and Optical Systems Systems Track Complete at least 3 of the 5 courses listed. UC MEng Courses EECE6019 Probability and Random Processes F EECE6024 Intro to Digital Signal Processing F EECE6026 Intro to Communication Systems S EECE6036 Intelligent Systems S EECE7033 Linear Systems Theory F Equivalent Subjects from HKPU EIE541 Digital Signal Processing EIE528 Digital Data Transmission EE520 Intelligent Motion Systems VLSI Design Track Complete all courses listed below (note UC VLSI courses are all 4 credit hours, not 3) UC MEng Courses Equivalent Subjects from HKPU EECE6080C Intro to VLSI Design F EIE511 VLSI System Design EECE6082C VLSI Design for Test and Power S EECE6086C VLSI Design Automation S F offered fall semester S offered spring semester Elective courses 3 required for VLSI track; 4 required for devices and materials track; 4 required for systems track. Students can take any course from EECE (Electrical Engineering and Computer Engineering) at UC. The following HKPU courses are also acceptable electives: EE501 Alternative Energy Technologies EE502 Modern Protection Methods EE505 Power System Control and Operation EE509 High Voltage Engineering EE510 Electrical Traction Engineering 10

33 EE512 Electric Vehicles EE514 Real Time Computing EE517 Fibre Optic Components EE520 Intelligent Motion Systems EE521 Industrial Power Electronics EE522 Optical Fibre Systems EE524 Open Electricity Market Operation EE525 Energy Policy and Restructuring of Electricity Supply Industry EE526 Power System Analysis and Dynamics EE527 Auto-Tuning for Industrial Processes EE528 System Modelling and Optimal Control EE529 Power Electronics for Utility Applications EE530 Electrical Energy-saving Systems EE533 Railway Power Supply Systems EE535 Maintenance and Reliability Engineering EE536 Signaling and Train Control System EE537 Railway Vehicles EE539 Aerospace Power Electronics and Actuation Systems EE550 Enterprise Risk and Asset Management EE551 Principles of Photonics and Optical Systems EE560 Metros in Hong Kong and China EE570 Design and Analysis of Smart Grids EE5381System Assurance & Safety in Railways COMP5411 Fundamentals of Operating Systems COMP5414 Computer Architecture COMP5228 Embedded Software Engineering COMP5223 Middleware and Distributed Objects 11

34 MEng Graduate Program Curriculum - Mechanical Engineering Track Courses 4 required There are no compulsory courses. Students are required to complete a minimum of 4 courses from the list below. These courses can be completed at UC or by completing an equivalent HKPU course shown below. UC MEng Courses AEEM 6001 Adv Strength of Materials F MECH6013 Smart Structures F MECH6031 Intro to Robotics F MECH6046 Bio-Fluid Mechanics F MECH6050 Occupational Safety Engineering F MECH6060 Applied Fast Fourier Transforms F MECH6066 Acoutstics F MECH6070 Intermediate DFM F MECH6074 Quality Control F, S MECH6075 Production Planning & Control F MECH6077 Micro & Nano Manufacturing F MECH6081 Modeling Materials F MECH6097 HVAC Design I F MECH7014 Adv Solid Mechanics F MECH7042 CFD for Incomp Flow F MECH7053 Adv Finite Element Methods F MECH7056 Solid Mechanics of Bio Materials F MECH7062 System Dynamic analysis F MECH7067 Roterdynamics F MECH7075 Principles of Ergonomics F MECH7090 Conduction Heat Transfer F MECH7095 Bio-heat Transfer F MECH7096 Viscous Fluid Flow F EGFD7041 Viscous Flow and Heat Transfer F MECH6004 Monte Carlo Methods S MECH6011 Computational Design S MECH6023 CAD for Manufacturing S MECH6032 Robot Control and Design S MECH6035 Intelligent Systems Theory S MECH6036 Robot Vision S MECH6051 Safety Eng & Product Liability S MECH6052 System Safety S MECH6062 Experimental Vibrations S MECH6063 Exp Analysis of Rotating Sys S MECH6073 Intro to E-Manufacturing S MECH6076 Supply Chain Modeling and Opt. S MECH6094 Fund & Appl of Solar Energy S MECH6095 Thermal Energy Storage S MECH6096 Internal Combustion Engines S MECH7052 Finite Element Method S MECH7055 Fracture Mechanics S Equivalent Subjects from HKPU ME534 Engineering Acoustics ME573 Project on Product Design and Mng 12

35 MECH7064 Advanced System Dynamics S MECH7070 Adv Manufacturing Processes S MECH7072 Precision Eng and Comp Metrology S MECH7091 Convection Heat Transfer S MECH7094 Boiling Heat Tx and 2-Phase Flow S F offered fall semester S offered spring semester Elective Courses 3 required Elective courses can be selected from the tables above. The following HKPU courses are also acceptable electives: ME534 Engineering Acoustics ME536 Vibration and Structure-borne Noise ME540 Fuels and Engines ME548 Computer Aided Product Analysis ME552 Integrated Engineering Design ME556 Advanced Combustion Systems ME557 CFD & Thermo-fluid System Design ME558 Advanced Materials and Structural Design ME559 Advanced Environmental and Transportation Noise Control ME564 Principles and Design of Air Pollution Control Devices ME565 Prevention and Control of Vehicular Emission ME566 Industrial and Environmental Measurement Technology ME567 Advanced Control Technology ME569 Thermal System Design and Management ME570 Advanced Product Mechatronics ME571 Corrosion Control ME572 Design for Sustainable Development ME574 Product Noise Control ME575 Thermal Radiation Heat Transfer ME576 Turbulent Flows and Aerodynamics ME577 Advanced Aircraft Structures ME578 Aircraft Design ME579 Aircraft Noise and Aeroacoustics ME583 Advanced Avionics Systems ME584 Airworthiness and Maintenance ME585 Human Factors in Aircraft Maintenance ME586 Operations Research in Aviation ME588 Heat Transfer in Modern Gas-Turbine Engines ME589 Aerodynamics in Modern Gas-Turbine Engines ISE520 Manufacturing Strategy 13