LIFTING HIRE. General Lifting Equipment Material Handling Moving & Winching Crane & Site Jacking Equipment Load Measuring Safety & Access

Transcription

1 LIFTING HIRE. General Lifting Equipment Material Handling Moving & Winching Crane & Site Jacking Equipment Load Measuring Safety & Access

2 LIFTING HIRE GENERAL LIFTING. MANUAL CHAINBLOCKS Designed for easy raising and lowering of equipment in a controlled manner. Available up to 30 tonnes capacity. Various height of lift available. 250kg 30 tonnes capacity Note: Higher capacity blocks available on request L KG 3M L KG 6M L KG 9M L TONNE 3M L TONNE 6M L TONNE 9M L TONNE 3M L TONNE 6M L TONNE 9M L TONNE 3M L TONNE 6M L TONNE 9M L TONNE 3M L TONNE 6M L TONNE 9M LEVERHOISTS L KG 1.5M LF KG 3.5M L KG 1.5M LF KG 3.5M L TONNE 1.5M LF TONNE 3.5M L TONNE 1.5M LF TONNE 3.5M LB TONNE 1.5M 360 CHAINBLOCKS ELECTRIC CHAINHOISTS Ideal for special rigging applications. Handwheel cover rotates 360 for hoist operation in any direction This rugged, compact tool is designed for close quarter lifting and pulling applications. 250kg 9 tonnes capacity For easy lifting of up to 5 tonnes with push button pendant control. 110v single phase available up to 3,000kg capacity 415v 3 phase available up to 5,000kg capacity Various heights of lift to suit most applications LF TONNE 6M LF TONNE 6M LM45* TONNE 4M LM46* TONNE 4M *NEW FLEETING TYPE 1 & 2 TONNE CAPACITY AVAILABLE L KG 6M L KG 12M L KG 20M L TONNE 6M L TONNE 12M L TONNE 20M L TONNE 6M L TONNE 9M L TONNE 12M LM RADIO CONTROLLED 174 Find your nearest Branch:

3 AIR POWERED CHAINHOIST For lifting applications where continuous use is required. Up to 15 tonnes capacity Various heights of lift Avoid duty cycle restrictions Note: Please ensure sufficient air supply is available L TONNE 6M L TONNE 9M L TONNE 12M L TONNE 6M L TONNE 9M L TONNE 12M L TONNE 6M L TONNE 9M L TONNE 12M LD FILTER LUBRICATOR BEAM TROLLEY CLAMPS Up to 5 tonnes capacity available Quick and easy installation secured by locking lever Can be used as a fixed clamp or as a trolley Note: Please specify flange size when ordering BEAM TROLLEYS PUSH TRAVEL Up to 15 tonnes capacity available Adjustable to suit a wide range of beam sizes Note: Please specify flange size when ordering CODE 1 DAY 2 DAYS 7 DAYS INFO L KG L TONNE L TONNE L TONNE L TONNE BEAM TROLLEYS GEARED Up to 15 tonnes capacity available Adjustable to suit a wide range of beam sizes Note: Please specify flange size and hand chain length when ordering CODE 1 DAY 2 DAYS 7 DAYS INFO L TONNE L TONNE L TONNE LC TONNE LIFTING HIRE GENERAL LIFTING. BEAM CLAMPS A fixed lifting point 1 10 tonnes capacities available Note: Please specify flange size when ordering LI TONNE LI TONNE LH TONNE CODE 1 DAY 2 DAYS 7 DAYS INFO L TONNE L TONNE L TONNE L TONNE L TONNE or visit our website at 175

4 LIFTING HIRE GENERAL LIFTING. STEEL DEE SHACKLES We stock a huge range of shackles for many applications. Please contact your local branch with details of specific requirements. WLL D D W S E WEIGHT CODE 1 DAY 2 DAYS 7 DAYS TON IN IN IN IN IN KG SMALL DEE /4 3/8 3/8 7/8 3/ /8 1/2 5/8 1.3/ /2 5/8 7/8 1.7/8 1.1/ L /8 3/ /4 1.1/ /4 7/8 1.1/4 2.3/4 1.3/ / /8 3.1/ /8 1.1/2 3.5/8 2.1/ /8 1.1/4 1.3/4 4.1/8 2.1/ /4 1.3/8 1.7/8 4.1/2 2.3/ /8 1.1/2 2.1/ LH /2 1.3/4 2.3/8 5.1/2 3.1/ /8 1.7/8 2.1/2 5.7/8 3.3/ / /4 6.3/ /8 2.1/8 2.7/8 6.3/4 4.1/ / /4 4.1/ /8 2.3/8 3.1/4 7.3/4 4.3/ LARGE DEE /4 3/8 1/ / /8 1/2 3/4 1.1/ LB /2 5/8 1.1/8 2.1/8 1.1/ LA /8 3/4 1.1/4 2.1/2 1.1/ L /4 7/8 1.1/2 2.7/8 1.3/ L / /4 3.1/ L / /4 2.1/ L /8 1.1/4 2.1/8 4.1/8 2.1/ L /4 1.3/8 2.3/8 4.1/2 2.3/ L /8 1.1/2 2.5/ L /2 1.3/4 2.3/4 5.3/8 3.1/ /8 1.7/ /4 3.3/ / /4 6.1/ /8 2.1/8 3.5/ / /4 3.7/8 7.3/8 4.1/ /8 2.3/8 4.1/8 7.3/4 4.3/ /4 2.1/2 4.1/4 8.1/ /2 2.7/8 4.3/4 9.1/4 5.3/ KEY d = Material Diameter D = Pin Diameter W = Jaw Width S = Inside Body Length e = Boss Diameter 176 Find your nearest Branch:

5 MANHOLE LIFTING PINS Used with slings (see page 179) Usually used in threes Diameter: 32mm quick release type ALLOY SHACKLES Items meet the performance requirements of U.S. Fed specification RR-C-271 Dee type also available KEY d = Material Diameter D = Pin Diameter W = Jaw Width S = Inside Body Length of 'BOW' Shackle e = Inside Body Length of 'DEE' Shackle LIFTING HEADS For locating onto pre-cast concrete anchors. LC MM 1.5 TONNE PER PIN LF MM 1 TONNE PER PIN QUICK RELEASE LA TONNE LF TONNE LF TONNE LL TONNE CONTAINER LIFTING LUGS Top set has 56 tonnes capacity Bottom set has up to 40 tonnes capacity LA EACH (USED IN SETS OF 4) WLL D D W S E RADIUS WEIGHT CODE 1 DAY 2 DAYS 7 DAYS TON IN IN IN IN IN KG BOW DEE BOW SHACKLES L L L L L L L L L L L L L L L L L LIFTING HIRE GENERAL LIFTING. or visit our website at 177

6 LIFTING HIRE GENERAL LIFTING. GANTRIES Lightweight and portable, the gantry eases the burden of manual handling. Available from tonnes capacity Simple span adjustment on aluminium gantries Supplied on locking 360º castor wheels Beam trolley supplied with unit on aluminium gantries Lightweight, portable and easy on site assembly Greater working capacities available Extra beam trolleys available LE TONNE LD TONNE LK EXTRA HIGH 2 TONNE LE TONNE L TONNE/STEEL L TONNE/STEEL LL TONNE NOTE: OTHER LENGTH BEAMS AVAILABLE AT ADDITIONAL COST BUILDER S GANTRY HOIST Lightweight and portable Safe working loads of 300kg and 500kg See page 196 for accessories LA PHASE 110V 300KG LB PHASE 415V 500KG NOTE: BALLAST CAN BE SUPPLIED AT EXTRA COST SHEAR LEGS Basic lifting aid from 500kg to 2 tonnes capacity. Adjustable with central lifting eye to attach lifting equipment. See page 194 for hoists. LC KG L KG L KG LIFTING MAGNETS The lifting magnets are suitable for flat and round material. Easy ON/OFF switching. MANHOLE COVER LIFTER Easy to assemble hydraulic manhole cover lifter. Develops 1.5 tonnes of force 2 and 4 key types available LB KG FLAT MATERIAL LB KG FLAT MATERIAL LH KG FLAT MATERIAL LA TONNE FORCE 178 Find your nearest Branch:

7 CHAINSLINGS Our range of chainslings are designed to support most applications. Single, double, 3 and 4 leg slings available in various capacities and lengths Loadings are related to 1 leg, 2 leg, 3 leg and 4 leg chainslings Brandon Lifting stock a huge range of chainslings. Contact your local branch with details of your specific requirements. WEBBING SLINGS AND ROUNDSLINGS WORKING LOAD LIMIT (WLL) IN TONNES ANGLE 90º 0 45º 45 60º 0 45º 45 60º 0 45º 45 60º FACTOR MM MM MM MM MM MM MM MM MM LIFTING HIRE GENERAL LIFTING. WEBBING SLINGS ROUNDSLINGS L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 6M L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 6M L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 6M L TONNE 2M L TONNE 3M L TONNE 4M L TONNE 6M NOTE: MANY OTHER CAPACITIES & LENGTHS AVAILABLE L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 6M L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 6M L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 6M L TONNE 1M L TONNE 2M L TONNE 3M L TONNE 5M NOTE: MANY OTHER CAPACITIES & LENGTHS AVAILABLE All lengths specified are EWL (Effective Working Length). or visit our website at 179

8 LIFTING HIRE GENERAL LIFTING. WIRE ROPE SLINGS Note: Brandon Lifting stock a range of wire rope slings for most applications, contact your nearest branch. WORKING LOAD LIMIT (WLL) FOR WIRE ROPE SLINGS ROPE DIAMETER* SINGLE LEG MM CAPACITY *LARGER SIZES AVAILABLE POA ROPE DIAMETER* SINGLE LEG MM CAPACITY L TONNE X 3M EWL L TONNE X 3M EWL L TONNE X 3M EWL L TONNE X 3M EWL L TONNE X 3M EWL L TONNE X 3M EWL L TONNE X 3M EWL EWL = EFFECTIVE WORKING LENGTH WIRE ROPE CUTTER A powerful hand device that can make easy work of cutting wire rope up to a diameter of 20mm. LG MAXIMUM 20MM DIAMETER STEEL ROPE 180 Find your nearest Branch:

9 MATERIAL LIFTS A range of manually operated material hoists for raising and positioning loads up to 454kg. Ideal for installing air conditioning and heating ducts. Maximum lifting height of manual lift is 25ft. Fork extensions and other accessories available. Extension Platform Boom Modular Pipe Attachhment Pipe Cradle GENIE 1 DAY 2 DAYS 7 DAYS INFO SUMNER 1 DAY 2 DAYS 7 DAYS INFO L SLA10 GENIE 454KG UP TO 10FT L SLA15 GENIE 363KG UP TO 15FT L SLA25 GENIE 295KG UP TO 25FT LA FORK EXTENSIONS LE PLATFORM LA BOOM LC PIPE CRADLE Sumner Material Lift LK SUMNER 455KG 3.2M LK SUMNER 360KG 4.6M LK SUMNER 300KG 7.5M LK FORK EXTENSIONS LL PIPE CRADLE LL LIFTING BOOM MAXIMUM 2 MATERIAL HOISTS WHEN USED IN UNISON LIFTING HIRE MATERIAL HANDLING. ELECTRIC STACKER TRUCK Rechargeable Battery Operated Stacker Truck fitted with tiller handle controls, hour meter, battery indicator, display, safety stop button and horn. Powered lift & travel fork dimensions 1150 x 560mm. LM34 closed height 1780mm LM47 closed height 2250mm LM CAPACITY 1200KGS LM CAPACITY 1200KGS or visit our website at 181

10 LIFTING HIRE MATERIAL HANDLING. PLASTERBOARD LIFT A simple winch-operated lift for positioning plasterboard and sheet materials up to a height of 3.5m. Storage trolley available. ROUSTABOUT Ideal for erection and positioning of pipe and steelwork. Available in 4.6m and 7.6m H.O.L. Moves vertically and horizontally SACK TRUCKS Eases most manual handling tasks. GENIE CO 2 SUPERHOIST Lightweight portable hoist, powered by CO 2 gas, sets up in seconds and operated by pendant control to activate up and down functions. CO 2 cylinders charged extra. Closed height: 1.37m Platform length: 48 x 61cm Load capacity: 113kg Lifting height: 5.6m Weight: 31kg KG 3.5M LD CAPACITY 113KG PANEL GRIPS Excellent for the transportation of window panes, metal and steel materials, stone slabs, wood and ply sheets and laminates. Maximum weight per pair: 200kg LC WLL 680KG 4.5M LC WLL 680KG 7.6M L SACK TRUCK WAY SACK TRUCK L STAIR CLIMBER LL PANEL GRIPS 182 Find your nearest Branch:

11 COMPACT LIFTS Compact material hoist will fit in most estate cars and commercial vehicles. SWL: 250kg Maximum lifting height: 3.5m LC KG CAPACITY LD EXTENSION FORKS NOTE: MAXIMUM 2 MATERIAL HOISTS WHEN USED IN UNISON BEAM LIFTER Ideal for lifting and lowering beams, ductwork and piping, can be used individually or in a pair. Units stackable for easy transportation Lifting height: 1.1 to 3.0m Weight: 86kg BOARD TROLLEYS For easy transport of plasterboards, timber and other sheet materials WHEELED WHEELED SITE TROLLEYS Moving heavy loads in tight places is what this trolley is all about. The pivoting front wheels and generous handle make it easy to use. 1000kg solid/pneumatic tyres 2000kg solid tyres LIFTING HIRE MATERIAL HANDLING. LH KG CAPACITY BEAM LIFTER L KG LH KG or visit our website at 183

12 LIFTING HIRE MATERIAL HANDLING. PALLET TRUCKS For moving palleted goods quickly and efficiently around site in any industry. Various types available to suit your needs Special sizes also available - contact your local lifting branch for details. SEE PAGE 199 FOR ROUGH TERRAIN VERSION LB TONNE STANDARD LB TONNE HIGH LIFT LD PALLET TRUCK C/W SCALES POWERED STAIR CLIMBER A battery operated truck with triple wheels or caterpillar track. Capacity: up to 310kg Modern and lightweight Fast climbing speed L WHEELED LI CATERPILLAR 150KG SKOOTS Capacity: 2 tonnes per pair Straps bind unit to load Operates where forklifts cannot go Turns 360 within its own length Precision hydraulic lift LA TONNE PAIR NOTE: INDIVIDUALLY PRICED BUT USED IN PAIRS ELECTRIC PALLET TRUCK 2000kg capacity rechargeable battery operated Pallet Truck fitted with ergonomic handle, hour meter & battery indicator display, safety button & horn Powered lift & travel fork dimensions: 1150 x 550mm o/a 1715 x716mm. PALLET SKATE Turns pallet into manoeuvrable trolley. Swivel castors Dimensions 1200 x 1010mm Capacity 1200kg LM KG LK KG 184 Find your nearest Branch:

13 SCISSOR TABLES Foot operated pump Variable working height Various platform sizes available FORK LIFT JIB GAS BOTTLE CARRIER FORK TRUCK ATTACHMENTS LB KG LB KG LG KG LF KG Extendable jib allows the movement of awkward loads from inaccessible locations. Adjustable from 1 3m load centres Gives up to 9 lifting positions Capacity decreases with extension A safe mode of transporting gas bottles on site. Can be used with forklift or crane 4 and 6 bottle type available LD /6 BOTTLE CAPACITY LD FORK TRUCK EXTENSIONS L HOOK ATTACHMENT FORK LIFT TIPPING SKIPS Ideal for removing waste away from work area using fork truck Converts forks into a single lifting point LIFTING HIRE MATERIAL HANDLING. LG MAXIMUM CAPACITY 3000KG LL FIXED 3000KG LI LOW PROFILE 4000KG LH LTR LE LTR LF LTR LF LTR LH LTR NOTE: PLEASE ADVISE CAPACITY or visit our website at 185

14 LIFTING HIRE MATERIAL HANDLING. FURNITURE MOVER Ideal for moving/ transporting heavy furniture. LA ,800KG PAIR MOBILE PIPE RACK Perfect for transporting and storing all types of pipework while on-site. Save time by keeping pipework closer to the work area. Lockable castors Stackable Minimum 1 week hire PLATE CLAMPS Universal and horizontal plate clamps supplied from 500kg to 10 tonnes The universal type of clamp can lift and turn over plates in one smooth operation Horizontal clamps supplied in pairs Other types of clamps are available, please contact your local branch Horizontal Clamp used in pairs UNIVERSAL CLAMP LE KG L TONNE LB TONNE L TONNE L TONNE L TONNE HORIZONTAL CLAMP (PRICE PER PAIR) LB TONNE L TONNE LA TONNE PIPE TROLLEY A pipe trolley designed to carry various pipes up to 6m long over rough ground. Supplied with either solid rubber or pneumatic tyres CODE 7 DAYS INFO 09AE PIPE RACK L CAPACITY 450KG 186 Find your nearest Branch:

15 PETROL VACUUM LIFTER Powered by a petrol engine this vacuum lifting machine is designed to be used whilst suspended from the bucket linkage of any suitably equipped excavator or digger (check vehicle capacity before use). Fitted with a standard vacuum head, the lifter can handle various types of kerb including the Bus Stop kerbs. Interchangeable heads are available, for handling slabs, granite blocks, beany blocks and ACO standard drainage channels. Capacity: 350kg when used with adjustable head STONE MAGNET MOBILE TROLLEY STONE MAGNET VACUUM LIFTER WHEELED TROLLEY Turns standard Probst 2 man VPH Vacuum Lifter into a single operator trolley reducing manual handling issues and improving productivity. LG PETROL VARIOUS LIFTING HEADS AVAILABLE Mobile trolley for use with Stone Magnet (LG28 - see opposite). Easy to integrate Stone Magnet with suction plates easily interchangeable between Stone Magnet & Trolley - no parts required. For use with excavator, forklift and telehandler (check vehicle capacity before use). For safe, fast and precise laying of various slabs, paving stones and kerbs. Capacity: 200 or 400kg LM WHEELED TROLLEY FOR USE WITH LD60 SEE BELOW BATTERY POWERED VACUUM LIFTER This battery powered vacuum-lifting machine can be used by two people (where lifting regulations permit), by one man with the special wheeled unit or in conjunction with a small excavator and is ideal for smaller tasks or reinstatement work. Maximum lift capacity: 150kg Various types of lifting heads available LIFTING HIRE MATERIAL HANDLING. LM CAPACITY 200KG LG BATTERY VARIOUS LIFTING HEADS AVAILABLE LD BATTERY LI SIDE LIFT or visit our website at 187

16 LIFTING HIRE MOVING AND WINCHING. SNATCH BLOCKS Available with a hook or shackle fitting L TONNE (HEAD LOAD) LA TONNE (HEAD LOAD) L TONNE (HEAD LOAD) OTHER CAPACITIES AVAILABLE ON REQUEST HYDRAULIC WINCHES Power operated TU 16H (1,600kg) or TU32 H (3,200kg) each fitted with a self reciprocating hydraulic ram ROPE WINCHES Our range of rope winches are ideal for lifting, pulling and tensioning. No limit to rope length Increase capacity using multiple sheave blocks Various rope lengths available L KG W/R WINCH L KG 20M ROPE L KG 30M ROPE L ,600KG W/R WINCH L ,600KG 20M ROPE L ,600KG 30M ROPE L ,600KG 50M ROPE L ,200KG W/R WINCH L ,200KG 20M ROPE L ,200KG 30M ROPE L ,200KG 50M ROPE PETROL AND ELECTRIC POWER PACKS Supplied in petrol and 415v (3 phase) Various reservoir capacities Output flow rate: ltr/per min Maximum pressure: 700 bar Hoses to suit L ,200KG WINCH/RAM L ,200KG 20M ROPE L ,200KG 30M ROPE L ,200KG 50M ROPE L PETROL 1-WAY L PETROL 2-WAY L ELECTRIC 3 PHASE 188 Find your nearest Branch:

17 CABLE DRUM JACKS AND SPINDLES Available in 3, 6 and 8t screw type Spindle to suit 10 and 20t rack and pinnion available Easy to use adjustable jacks for drum lifting LF TONNE L TONNE L TONNE LL TONNE RACK & PINNION TYPE LL TONNE RACK & PINNION TYPE L SPINDLES INDIVIDUALLY PRICED BUT USED IN PAIRS CABLE REEL TROLLEY SMALL Transports and reels small cable drum/reels, secured by unique locking spindle. Capacity: 115kgs LL REEL TROLLEY SMALL CABLE DRUM ROTATOR A simple solution for dispensing rope and cable from a drum. Can be used for internal and external cabling jobs Heavy duty type used in pairs LH ROTATOR 1500KG LIFTING HIRE MOVING AND WINCHING. CABLE REEL TROLLEY LARGE Transports and reels cable drums up to 635mm wide 1 metre diameter. Drums secured in place by positive locking arms. Capacity: 160kgs CABLE ROLLERS An excellent solution for guiding and protecting cables Light and easy to use Please specify standard or corner type LL MAXIMUM DIAMETER 1M L080/L STANDARD LH CORNER or visit our website at 189

18 LIFTING HIRE MOVING AND WINCHING. CABLE PULLING WINCH A portable dual capstan winch suitable for large pulling applications. Foot controlled Winch fitted with overlead protection Speed Large capstan: 4m/min Small capstan: 2.5m/min LM V CAPSTAN KG COMPACT WIRE HOIST Lightweight and compact for easy handling and installation. 360 self latching swivel hook Complete with 10m pendant control Weight: 26kg SWL: 230kg 25m MINIFOR HOISTS This versatile wire rope hoist is available up to 500kg capacity, with various lengths of rope to suit your requirements. Radio controlled units available. LM KG R/CONTROL L KG PENDANT LM KG R/CONTROL LB KG PENDANT LM M MINIFOR ROPE LM M MINIFOR ROPE LM M MINIFOR ROPE LM M MINIFOR ROPE LM M MINIFOR ROPE LM REMOTE CONTROL BATTERY WINCH A variable speed battery winch, 450kg capacity with 4.5m length of wire. LED load indicator Complete with two batteries LK V LL RECHARGEABLE BATTERY 190 Find your nearest Branch:

19 MOVING SKATES NYLON SKATES Polymer composite load wheels (limits floor damage) Easy steer ball bearing turntable Multiple wheels for even weight distribution A set comprises: 1x turntable skate, 2x trailing skates Now available up to 100 tonnes Can be hired separately CATERPILLAR SKATES Capacities up to 50 tonnes per set Individual high load skates available ROLLER CROW BAR Solid construction Sealed roller bearings Steel or nylon rollers Entry tip: 5mm CATERPILLAR L TONNE PER SET L TONNE PER SET L TONNE PER SET LB TONNE PER SET PRICES FOR SET OF 4. CAPACITY FOR SET OF 4. L TURNTABLE FOR 15 TONNE SET L TURNTABLE FOR 20 TONNE SET L EQUALISER FOR 15 TONNE SET L EQUALISER FOR 20 TONNE SET L TURNTABLE FOR 40/50 TONNE SET L EQUALISER FOR 40/50 TONNE SET NYLON LC TONNE STEERING SKATE LC TONNE TRAILING SKATE L TONNE STEERING SKATE LC TONNE TRAILING SKATE L TONNE STEERING SKATE LC TONNE TRAILING SKATE LA TONNE TRAILING SKATE L TONNE STEERING SKATE L TONNE TRAILING SKATE LL TONNE STEERING SKATE LL TONNE STEERING SKATE LL TONNE TRAILING SKATE GIN WHEEL AND SECURE PULLEY A way of performing lightweight, one-man lifting operations. Secure pulley has built-in automatic brake suitable for 18/20mm rope Maximum cap: 50kg Gin wheel cap: 250kg Fits to a standard scaffolding LIFTING HIRE MOVING AND WINCHING. L ROLLER CROW BAR L GIN WHEEL 250KG SECURE PULLEY 50KG LE M ROPE or visit our website at 191

20 LIFTING HIRE CRANE AND SITE. SCAFFOLD HOIST Safe working load: 200kg Maximum lift: 25m Hoist speed: 19m/min Weight: 42kg Pendant control Radio control option SCAFFOLD HOIST ACCESSORIES Scaffold Hoist Prop Conversion Ballest required Hoist Skip Bucket Carrier LG BUCKET CARRIER LB HOIST SKIP L BARROW CHAIN LI PROP CONVERSION LD BRICK BASKET LM REMOTE CONTROL LIFTABLE/CRANEABLE WHEELBARROW Galvanised frame, hardwearing polypropylene tray and anti puncture tyre (350x8) 200kg/100ltr capacity No need for wheelbarrow chains L V LM KG CAPACITY 192 Find your nearest Branch:

21 PRECAST CONCRETE GRAB Suitable for handling heavy prefabricated concrete components due to high gripping force. Complete with auto release. PIPE GRAB Designed for laying sewer pipes. With wide gripper arms to ensure coated pipes are not damaged during installation. Can be used in narrow or restricted trenches due to grab profile. CRANE FORKS For moving of palletised goods by crane. LH KG 0 775MM LK KG MM LH TONNE MM LH TONNE MM L AND 2000KG LA PROTECTION NET LIFTING HIRE CRANE AND SITE. BLOCK GRAB Designed to lift a full pallet of blocks with automatic release mechanism. PIPE SUSPENSION CLAMP Supplied with 3-leg sling Clamp opening: mm L WLL 1500KG LF ,800KG LA SAFETY NET LG FORK TRUCK YOKE L KG or visit our website at 193

22 LIFTING HIRE CRANE AND SITE. KERB GRAB BLOCK CART BOARD LIFTER Suitable to lift a variety of kerbs. Adjustable mm Auto release Use with suitable lifting device LB KG CAPACITY Safe and easy transportation of pavers, kerb stones and slabs. Can be loaded from the pallet. Loads are clamped into place. LE KG CAPACITY Specially designed to handle board materials. Allows loads to be lifted horizontally or vertically. Improves loading/ unloading times. CODE 1 DAY 2 DAYS 7 DAYS LH INFO 1,800KG CONCRETE SLAB LIFTING CLAMP Suitable for handling heavy prefabricated concrete components due to high gripping force. Complete with auto release. MANUAL KERB AND SLAB LIFTER Kerb and slab lifter for manual handling of kerbs and slabs. Adjustable Fitted with lifting eye VACUUM HANDY Economical manual Vacuum Lifter for installing non-porous slabs. One man operation with 25Kg carrying capacity or two man operation with easy to attach two man handle rated at 50Kg carrying capacity. Suction released by opening simple valve. CODE 1 DAY 2 DAYS 7 DAYS INFO CODE 1 DAY 2 DAYS 7 DAYS LB INFO 1000KG LB KG CAPACITY 0 TO 550MM LE KG CAPACITY 485 TO 1020MM LL KG CAPACITY 910 TO 1090MM LM VACUUM HANDY MANUAL LIFT 194 Find your nearest Branch:

23 DUAL PURPOSE MAN BASKET Maximum of 2 persons with tools. Can be used with either fork lift or crane. Fitted with side entry gate and tool tray. Harness and lanyard must be used with this equipment (see page 209) ROUGH TERRAIN PALLET TRUCK For the easy moving of palleted goods around construction sites. Adjustable LD ROUGH TERRAIN 1500KG PILING CLAMPS Quick release mechanism for easy pitching of piling sheets. LIFTING HIRE CRANE AND SITE. LE TONNE SKIP LIFTING ASSEMBLY Designed for lifting standard size skips with a WLL of 11.2 tonnes. LB MAN LM MAN LA SKIP LIFTING ASSEMBLY or visit our website at 195

24 LIFTING HIRE CRANE AND SITE. COUNTERBALANCED FLOOR CRANES Highly manoeuvrable with adjustable three position jib. LI KG L KG BALLAST CAN BE SUPPLIED AT EXTRA COST FLOOR/ENGINE CRANES A variety of floor cranes are available including fixed frame and folding models with adjustable jib. L KG L TONNE L TONNE BIG BAG LIFTING BEAM 1500 Kg Cruciform lifting beam complete with 4 pick up points. Specifically for use in lifting and moving big bags. * For use with overhead crane or can be used with forklift - in conjuction with fork truck attachment (see page 189) Needs Bag ROOF SHEET SPREADER BEAMS Lightweight lattice type 3m sections WLL: 3 tonnes LM KG ( MM WIDTH) L UP TO 24M LSB UP TO 24M LATTICE* *CAN BE USED UP TO 32M AT REDUCED CAPACITY 196 Find your nearest Branch:

25 MODULAR SPREADER BEAM CHARTS MODULAR SPREADER BEAMS Our range of modular spreader beams come in easy to bolt together sections. WLL of 20, 30, 100 and 150 tonnes* 30 tonnes 100 tonnes 150 tonnes LIFTING HIRE CRANE AND SITE. SP02 POA POA POA WLL 20 TONNE* SP03 POA POA POA WLL 30 TONNE* SP10 POA POA POA WLL 100 TONNE* SP15 POA POA POA WLL 150 TONNE* *WLL REDUCES WITH BEAM LENGTH, SEE CHART ABOVE LIFTING BEAMS Single point top attachment Double pick-up points Useful in low headroom situations LG71 POA POA POA 2 TONNE LG82 POA POA POA 3 TONNE L993 POA POA POA 5 TONNE L994 POA POA POA 10 TONNE or visit our website at 197

26 LIFTING HIRE CRANE AND SITE. MODULIFT SPREADER BEAM Safe Working Load / 45º base sling angle MOD 70H MOD MOD MOD MOD MOD 12 MOD Span (metres) SP24 POA POA POA WLL 24 TONNE SP34 POA POA POA WLL 34 TONNE SP70 POA POA POA WLL 100 TONNE WLL REDUCES WITH BEAM LENGTH, SEE CHART ABOVE 198 Find your nearest Branch:

27 SITE STAIRWAY Portable Temporary Stairway Especially suitable for building/construction sites and on slopes/embankments. Stairway sections easily joined together Stairway fitted with handrails and locking mechanism Longer stairways supported with combibeam Maximum 2 person may use stairway at same time Collapsible sections for easy transportation Minimum hire period applies PRICE ON APPLICATION Please contact our one call desk on for details. LIFTING HIRE CRANE AND SITE. CODE COMBI SAFE SITE STAIRWAY LK47 LK48 LK49 LK50 LK51 LK52 LK53 LK63 LK64 INFO STAIRWAY 3 STEP STAIRWAY 6 STEP STAIRWAY 9 STEP STAIRWAY 12 STEP STAIRWAY UNIVERSAL SUPPORT STAIRWAY SLAB ATTACHMENT STAIRWAY SCAFFOLD ATTACHMENT COMBIBEAM SECTION Y12 COMBIBEAM SECTION Y6 or visit our website at 199

28 LIFTING HIRE CRANE AND SITE. COLUMN SKIPS Concrete skip for columns and walls. Geared gate for controlled pour, particularly on columns. Minimum 1 week hire CODE 7 DAYS INFO LF LTR LE LTR LI LTR DISCHARGE HOSES ARE CHARGEABLE CIRCULAR MUCK SKIPS L UP TO 1000 LTR LK UP TO 2000 LTR CONE FLOW SKIPS General purpose concrete skip lever or geared gate for controlled pour. Minimum 1 week hire CODE 7 DAYS INFO CODE 7 DAYS INFO LD LTR LD LTR MORTAR SKIPS BOAT SKIPS GEARED ROLLOVER SKIPS Steel or plastic mortar tubs with either sling or forklift points. Minimum 1 week hire Perfect for removing site spoil and rubbish. Easily emptied by disengaging locking mechanism. Minimum 1 week hire Our range of boat skips are designed to enable the crane operator to control the discharge of the skip. Minimum 1 week hire Ideal for large volume concrete pours on walls and general applications with a geared gate for controlled pour. Available from 500 to 1000 litre capacities. Fork lift truck option and other sizes available Minimum 1 week hire CODE 7 DAYS INFO LC STEEL 360 LTR LD POLY 250 LTR CODE 7 DAYS INFO LD LTR LC LTR LD LTR LH LTR CODE 7 DAYS INFO LH LTR LE LTR 200 Find your nearest Branch:

29 HYDRAULIC JACKS Standard and claw base jacks Claw rating is 40% of jack capacity Lever operated CODE 1 DAY 2 DAYS 7 DAYS L T STANDARD BASE L T CLAW BASE L T STANDARD BASE L T CLAW BASE L T STANDARD BASE L T CLAW BASE CABIN (HIGH LIFT) JACK Safety shear pin protects against overloading 19mm lift with each handle stroke Load is supported when activated in either direction Lever operated INFO HYDRAULIC TOE JACKS Can lift using head or toe Low toe height Lever operated L414/ TONNE LE TONNE LL SWIVEL TOE 5 TONNE TROLLEY JACKS Portable trolley jack for jacking vehicles or machinery. Lever operated RACHET TOE JACKS All purpose jacks for lifting and lowering Can lift using head or toe Lever operated L TONNE L TONNE BOTTLE JACKS Various capacities available up to 50 tonnes Lightweight and portable For commercial use Lever operated LIFTING HIRE JACKING EQUIPMENT. L WLL 3.5 TONNE L TONNE L TONNE LH TONNE L TONNE L TONNE L TONNE or visit our website at 201

30 LIFTING HIRE JACKING EQUIPMENT. HYDRAULIC CYLINDERS STANDARD Capacity: tonnes Stroke: mm LOW HEIGHT Capacity: Up to 100 tonnes Stroke: 6 16mm Ideal for restricted space Used in conjunction with hydraulic pumps See opposite CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS L TONNE X 25MM L TONNE X 50MM L TONNE X 100MM L TONNE X 50MM L TONNE X 100MM L TONNE X 150MM L TONNE X 60MM LC17 50 TONNE X 100MM LC18 50 TONNE X 150MM LE TONNE X 100MM L TONNE X 150MM CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS L869 5 TONNE X 6MM L TONNE X 11MM L TONNE X 11MM L TONNE X 13MM L TONNE X 16MM L TONNE X 16MM L TONNE X 16MM LOW PROFILE Capacity: up to 200 tonnes Stroke: 44 50mm Ideal for restricted space CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS LC09 10 TONNE X 44MM LC10 20 TONNE X 44MM LC11 30 TONNE X 44MM LC12 50 TONNE X 50MM LC TONNE X 50MM LF TONNE X 50MM HOLLOW Capacity: up to 100 tonnes Stroke: mm For use with screws, rods, cables and pullers CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS LC19 10 TONNE X 41MM LC21 20 TONNE X 50MM L TONNE X 63MM LC22 50 TONNE X 75MM L TONNE X 75MM DOUBLE ACTING ALSO AVAILABLE BRANDON LIFTING OFFER MANY OTHER TYPES AND SIZES OF HYDRAULIC CYLINDERS, CONTACT YOUR LOCAL BRANCH FOR DETAILS. 202 Find your nearest Branch:

31 HYDRAULIC PUMPS AXLE STANDS HYDRAULIC WEDGES Single and double acting available Manual and powered version Various hose lengths available Supplied with 1.8m hose L LTR SINGLE L LTR SINGLE L LTR L GALLON SINGLE L GALLON SINGLE L V SINGLE ACTING ACCESSORIES Gauges and calibration certificate available Steel stand, 10t capacity per pair - model AS5000M lowest height 457mm to maximum height 735mm. LM TON, MM PULLER KITS Complete kit for the extraction of bearings and gears. Hydraulic operation Standard and floor versions available Pump operated L TONNE WEDGE* *HYDRAULIC PUMP REQUIRED NUT SPLITTERS Various sizes available Hydraulic operation LIFTING HIRE JACKING EQUIPMENT. L WAY MANIFOLDS L WAY MANIFOLDS LH M HOSE LG M HOSE L TONNE L TONNE L TONNE HYDRAULIC PUMP REQUIRED LH M20 M33 BOLT L UP TO 50MM HYDRAULIC PUMP REQUIRED or visit our website at 203

32 LIFTING HIRE LOAD MEASURING. TENSILE LOAD LINK Tensile load measuring device, supplied in carrycase complete with shackles. Fully calibrated Battery operated Radio control available L TONNE L TONNE L TONNE L TONNE L TONNE BOLT TESTING KIT For testing of anchor points Fully calibrated Ideal for safety eye bolt testing COMPRESSIVE LOAD CELL Fully calibrated Hand held digital readout L TONNE L TONNE HAND TEST WEIGHTS Hand test weights suitable for on-site testing work. SLAB AND ROLLER WEIGHTS LG ROLLER WEIGHTS 250KG LH KG* *OTHER WEIGHT AVAILABLE TEST WEIGHT TROLLEY Transports up to 4 x 20kg hand test weights safely and easily. CODE 1 DAY 2 DAYS 7 DAYS LG INFO 20KN LB KG LH STILLAGE LF UP TO 4 X 20KG 204 Find your nearest Branch:

33 FALL ARREST HARNESS SINGLE POINT (REAR) Professional harness with rear attachment Designed for all day use Adjustable leg straps Adjustable chest straps Lightweight Easy to fit Conforms to BS EN 361:2002 LB SINGLE POINT FALL ARREST HARNESS TWO POINT (FRONT AND REAR) FALL ARREST AND WORK POSITIONING / HARNESS Professional harness front and rear attachments Comfortable to wear Adjustable leg straps Adjustable chest straps Lightweight Easy to fit Conforms to BS EN 361:2002 Professional harness with front, rear and side attachments Designed for all day use Adjustable leg straps Adjustable chest straps Lightweight Easy to fit Conforms to BS EN 361:2002 LB WORK POSITIONING ROPE ACCESS HARNESS Full body safety harness Padded support for comfort Fully adjustable Conforms to BS EN 361:2002 SHOCK ABSORBING LANYARD Complete with shock absorber Karabiner or scaffold hook Complies to BS EN 355:2002 Restraint lanyards also available LD KARABINER LA SCAFFOLD HOOK RETRACTABLE LANYARD Small and lightweight Built in shock absorber Complete with karabiner, or scaffold hook Conforms to BS EN 360 Always check that your attachment point can withstand the forces of a fall (check with your branch for load forces) LIFTING HIRE SAFETY AND ACCESS. L COMFORT LM SIT LD TWO POINT TYPE-EN813 L M or visit our website at 205

34 LIFTING HIRE SAFETY AND ACCESS. COUNTERBALANCED PORTA-DAVIT SYSTEM Lightweight, portable, easy to assemble (no tools necessary) system developed for use where no davit sockets are installed, or, building overhang applications. Counterbalanced system requires 16 x 20kg weights for ballast (see page 204). WLL for man-ride: 120kg 270 overhang with 1m radius and 180 operating arc LL KG LL RETRIEVAL WINCH 20M LL BASE MAN-RIDING TRIPOD AND WINCH Ideal for access/rescue in confined space Lightweight tripod Telescopic legs Can be used for lifting and lowering personnel Standard 20m winch Rescue harness available (see page 205) Secondary line available Bosuns Chair or Sit type Harness required for work positioning HI-VIS JACKET HARNESS Fully adjustable Available in yellow or orange LL POINT HARNESS HORIZONTAL SAFETY LINES Temporary fall arrest system Simple to install Horizontal safety lines up to 20m span Always check attachment points for loading prior to use L WEBBING LL ROPE VERTICAL SAFETY LINES Temporary fall arrest system May also be used as a secondary safety line For use with full body harness LB RETRIEVAL WINCH LB MAN-RIDING TRIPOD LB RESCUE HARNESS L M LG M LA M 206 Find your nearest Branch:

35 ATEX APPROVED TWO WAY RADIO This is an intrinsically safe ATEX two way radio for use in potentially explosive, hazardous environments. Atex specification on request. This is a licensed product and can be used with a Brandon Hire licence. LL ATEX EACH ESCAPE KITS This life saving escape kit is designed for emergency evacuation, ie harmful gases. Carry case provided L MIN L MIN FRESH AIR KIT Fresh air breathing apparatus supplies wearer with fresh air. Up to 18m hose unassisted (lung power) or up to 54m turbine assisted Basic kit consists of full face mask, c/w twin air hose, 9m hose assy, belt c/w hose connector, strainer c/w anchor pin. Note: Air blower (turbine) required when used with hose over 18m. LK BASIC KIT LK AIR BLOWER (TURBINE) LK M EXTENSION HOSE LK M EXTENSION HOSE ATEX LIGHTS Designed for use in hazardous areas Rechargeable LIFTING HIRE SAFETY AND ACCESS. GAS DETECTOR The mini-gas portable gas detector is able to monitor and display up to four gases simultaneously. These include oxygen and flammable gases as well as a range of toxic gases such as hydrogen sulphide or carbon monoxide. Detector gives both audible and visual alarm RECHARGEABLE BATTERY LL SINGLE GAS (OXYGEN) ONLY LG HAND LAMP LH TORCH LL PORTABLE ATEX FLOOD LIGHT LM ATEX CORDLESS SMITH LIGHT SEE PAGE 107 FOR MORE DETAILS or visit our website at 207

36 LIFTING HIRE SAFETY AND ACCESS. FALL ARREST BLOCKS Retractable lanyard Conforms to BS EN 360 Available with up to 30m line Additional 2m wire sling required when using fall arrest block at an angle more than 40 to horizontal Horizontal use lanyard now available L M LB M L M L M LL M LL HORIZONTAL LANYARD* L M LI HORIZONTAL USE SLING 2M *FOR USE WITH CR200/300 RETRIEVAL BLOCK Retrievable fall arrest device complete with built in winch. Can be used for rescue from a confined space. Comes in easy to assemble kit form. Conforms to BS EN 360 LIFE JACKET A light weight life jacket which is easy to fit. Note: re-arming kit chargeable if inflated LD SELF INFLATING ROOF MAN ANCHOR Mobile deadweight anchor (comes in easy to assemble kit form) Roof anchor may be safely used on the following roof surfaces: Single ply membrane, asphalt, steel cladding, concrete, mineral felt and stone chippings LD M LG M LI M L TEMPORARY 208 Find your nearest Branch:

37 FORK TRUCK ACCESS PLATFORM Access work platforms provide a safe, stable work area for routine maintenance, stock-taking and order picking. Harness and lanyard recommended and available on request LD MAN LD MAN RESCUE STRETCHER CAGE Designed to carry stretchered person and carer Supplied with lifting sling Stretcher available at extra cost WINDOW/DOOR ANCHOR Safety Anchor for use in Door/Window openings mm for one person use only with height safety Harness/Lanyard equipment. LM ANCHOR PERSONNEL LIFT These highly manoeuvrable electric lifts are battery or 110v operated and can be used for reaching heights up to 9m, carrying 136kg (1 man + hand tools), making them ideal for all types of maintenance work. Harness and lanyard recommended and available on request LIFTING HIRE SAFETY AND ACCESS. LE MAN MAX LK STRETCHER L UP TO 30FT or visit our website at 209

38 LIFTING HIRE SAFETY AND ACCESS. COMBISAFE LOADING SYSTEM A system comprising two units provides protection for two 12m lorry beds if parked each side of unit. A single unit can protect single 6m bed. Each unit comes complete with fall arrest block. Not to be used as make shift crane. EN795 Class B compliant Ballast required 3 tonne per single unit Safety harness must be worn (see page 209) Minimum hire period applies Please contact our one call desk on for details. LL34 POA POA POA LOADING SYSTEM LM FALL ARREST FRAME (MAIN BODY ONLY) 210 Find your nearest Branch:

39 SOFT LANDING BAGS The new air cushion fall protection system brings a new perspective of speed, convenience and adaptability to protecting your workforce on site. The inflatable air bags are quick and easy to install and move from site to site. Fire retardant Low environment hazard Minimum hire period applies LIFT SHAFT TOWERS AND LIFT SHAFT PROPS Purpose made for lift shaft installation and maintenance work. Minimum 1 week hire LIFTING HIRE SAFETY AND ACCESS. LD99 POA POA POA 2.5 X 0.55 X 0.55M LK54 POA POA POA 2.15 X 0.75 X 0.75M INFLATED LK44 POA POA POA PETROL LM61 POA POA POA BATTERY CHARGES APPLY FOR IMPLODED BAGS CODE 7 DAYS INFO LS X 0.8M 2.5M LS X 0.8M 4.5M LS X 0.8M 6.5M LS X 0.8M 8.5M LS X 0.8M 10.5M LS X 1.3M 10.5M LF M STANDARD PROP LH UP TO 4M LONG PROP or visit our website at 211

40 LIFTING SERVICES. BRANDON LIFTING EQUIPMENT SERVICES With a team of LEEA qualified technicians across the country, Brandon Lifting Hire tests and inspects thousands of pieces of lifting equipment every year at either one of our specialist branches or at our customer s premises. This service provides the customer with total peace of mind in having a fully certified piece of equipment. Other services include: Repairs Servicing Planned maintenance Testing and Re-certification 120 tonne independently calibrated vertical test machines* Nodding Donkey test machines Beam Installation Statutory Inspection of Height Safety Equipment *(centrally located call for details) 212 Find your nearest Branch: