Gas Outlets/Accessories

Transcription

1 Gas Outlets/Accessories # Anodized aluminum bottle holder slide bracket, 4 (10.160cm) # Stainless steel slide for mounting on wood or metal. # Bottle holder \without lock 180 Tubing Mount # Bottle holder w//lock used with # multi-level bottle bracket Mounting Hole 2 each. # Anodized aluminum multi-level bottle bracket, 3 (.914m)- does not include # Several bottle holders with lock can be used simultaneously 1 3/8 7/32 HOLES 20 1/2 19mm Tubing adapter WAGD (EVAC) GRILL ASSEMBLY # INCLUDES: Mounting hardware with nuts and washers ( 2 each, 8-32 x 2 in. screws) Scavenging tubing - 19mm diameter x 96 in. length 1 1/2 # Adjustable Slide Bracket Assembly OPTIONAL Scavenging tubing, per ft. # MERCURY MEDICAL Page 120 (800) 835-MMED n (727) n FAX (800)

2 Gas Outlets/Puritan-Bennett/Beacon Medical Chemetron Compatible Ohmeda Compatible Service Part Number Oxygen # Nitrous Oxide # Medical Air # Vacuum # WAGD (Evacuation) # Slide # N2 (D.I.S.S.) # Service Part Number Oxygen # Nitrous Oxide # Medical Air # Vacuum # WAGD (Evacuation) # Slide # CHEMETRON (Compatible) QUICK-CONNECT OUTLET OHMEDA (Compatible) QUICK-CONNECT OUTLET DIAMETER INDEX SAFETY SYSTEM (D.I.S.S.) OUTLET PURITAN-BENNETT QUICK CONNECT OUTLET D.I.S.S. Service Part Number Oxygen # Nitrous Oxide # Medical Air # Vacuum # WAGD (Evacuation) # Slide # Service Part Number Oxygen # Nitrous Oxide # Medical Air # Vacuum # WAGD (Evacuation) # Nitrogen # Carbon Dioxide # CO2-O2 (CO2>7.5%) # O2-CO2 (CO2<7.5%) # HeO2 (He>7.5%) # O2-He (He<7.5%) # Slide # MERCURY MEDICAL Page 121 (800) 835-MMED n (727) n FAX (800)

3 Gas Outlets/Accessories/Beacon Medaes/Puritan-Bennett GAUGE ELECTRICAL SLIDE BLANK Accessories shall be of a modular design allowing them to be ganged with a Beacon Medical (Puritan-Bennett) manufactured medical gas outlets on the job site to create a consolelike appearance. Each accessory shall consist of a rough-in and finish assembly. All Electrical Accessories utilize UL/CSA recognized hospital grade receptacles. The rough-in for electrical devices shall include a standard electrical box for electrical connections. Gauges shall have a pressure range of psi for Oxygen, Nitrous Oxide, Medical air, and Carbon Dioxide; psi for Nitrogen and 0-30 Hg for Vacuum and Evacuation. Gas specificity shall be maintained by positive pin indexing between rough-in and finish assembly. A machined brass outlet block shall be permanently attached to the mounting plate in such a manner so as to permit the 7- inch long, 3/8 O.D. type K copper inlet tube to be swiveled 360 for attachment to the piping system. A secondary valve shall be installed in the outlet block assembly for pressure testing and to prevent gas flow when the gauge is removed. Slides shall be extruded aluminum mounted to a standard insert and rough-in assembly. Blanks shall consist of a standard rough-in assembly with solid anodized aluminum insert plate and chrome plated cover plate. Service Complete Assy Gauge O2 (Oxygen) # N2O (Nitrous oxide) # Medical Air # Vac (Vacuum) # N2 (Nitrogen) # Electrical Twist Lock # Simplex Receptacle # Duplex Receptacle # Hampden Gnd. Recep. # Miscellaneous Slide # Blank, Gas # Blank, Electrical # ELECTRICAL ACCESSORIES 1/ /4 5/8 Note: Electrical Accessories furnished with 5/8 raised device cover. For wall thickness other than 5/8 customer must furnish correct size cover. 2-1/2 5-3/ / /4 5/16 A maximum of 3 units may be ganged without additional support. MERCURY MEDICAL Page 122 (800) 835-MMED n (727) n FAX (800)

4 Gas Outlets/Beacon Medical/Ohmeda Compatible QUICK CONNECT TYPE FIELD GANGABLE Ohmeda (Ohio Medical) Compatible Quick Connect Medical Gas outlets shall be gas specific for the services indicated and accept only corresponding Ohmeda (Ohio Medical) Quick Connect adapters. The Outlets shall be UL listed, CSA approved, and meet NFPA 99 Standards (formally NFPA 56-F). All outlets shall be tested and cleaned for oxygen service prior to shipping. A complete outlet shall consist of a gas specific finishing assembly to be installed after walls are finished and a matching gas specific finishing assembly to be installed after walls are finished. The rough-in assembly shall be of modular design and include a gas specific 16 ga. steel mounting plate designed to permit on-site ganging of multiple outlets, in any order, on any order, on 5 inch centerline spacing. A machined brass outlet block shall be permanently attached to the mounting plate in such a manner so as to permit the 7 inch long, 3/8 O.D. type K copper inlet tube to be swiveled 360o for attachment to the piping system. A secondary valve shall be installed in the outlet block assembly for pressure testing and to prevent gas flow when the latch/valve assembly is removed for service. A 1/2 high metal flange around the outlet block seal opening shall provide a plaster barrier. Gas service identification shall be affixed to the inlet tube and the face of the mounting plate. A temporary, transparent cover shall be provided to keep debris out of the outlet during installation while permitting labels to be viewed for outlet service identity. The latch/valve assembly shall include a double seal primary valve and be gas specific for the labeled service and accept only corresponding Ohmeda (Ohio Medical) Compatible hose and apparatus adapters. The latch/valve assembly shall be indexed to the corresponding rough-in assembly to avoid accidental cross-fitting and shall telescope up to 3/4 to allow for variation in finished wall thickness from 1/2 to 1-1/4. A metal trim plate with permanent, color coded marking of service identification shall be included as part of the latch/valve assembly. A die cast, chrome plated coverplate shall be provided to trim each outlet and to fill the space between adjacent outlets. Coverplate design shall allow latch valves to be individually removed for servicing. Item Number Service OHMEDA UL Listed/CSA Approved Meets or exceeds National and International Codes Compensates For Variation In Wall Thickness Up To 3/4 360o Swivel Inlet Tube To Simplify Installation Gas Specific Indexing Modular Design For Simplified On-Site Arrangement Accepts All Corresponding Ohmeda Gas Specific Compatible Adapters Made In the U.S.A. # O2 OHMEDA Q.C. # N2O # MEDICAL AIR # VAC # WAGD (EVACUATION) # SLIDE # N2 (D.I.S.S.) MERCURY MEDICAL Page 123 (800) 835-MMED n (727) n FAX (800)

5 Gas Outlets/Allied Healthcare The Puritan-Bennett Style Outlet: Easy-to-Use and Reliable. Fingertip, push-button release mechanism for secondary equipment. Utilizes Chemetron backbox for easy upgrade to Chemetron Completion Kit. Die-cast faceplate is chrome-plated for long life and durability. Non-interchangeable indexing system, prevents mislabeling. Meets NFPA and CGA standards. Cleaned and tested for oxygen use. PB STYLE Domestic QUICK CONNECT Oxygen # Vacuum # Medical Air # Nitrous Oxide # WAGD (Evacuation) # Carbon Dioxide # O 2 /CO 2 <7% # ISO QUICK CONNECT # # # # # # # The Oxequip Outlet: Flexibility that meets all the Standards. Outlet design meets Domestic and International standards for medical gas equipment. Modular design gives installer flexibility to vary sequence of gases for individual rooms. Color-coded outlet has non-interchangeable indexing system to prevent accidental interchange. Improved secondary check increases gas flow to patients. Easier installation due to adjustability for varying wall thickness and adjustable rotating inlet tube. U.L. and C.S.A. approved. DOMESTIC ISO OXEQUIP Quick Connect Quick Connect Oxygen # # Vacuum # # Medical Air # # Nitrous Oxide # # WAGD (Evacuation) # # Carbon Dioxide # # D.I.S.S. D.I.S.S. Oxygen # # Vacuum # # Medical Air # # Nitrous Oxide # # WAGD (Evacuation) # # Carbon Dioxide # # Chrome-plated, die-cast faceplate provides durability and improved appearance. MERCURY MEDICAL Page 124 (800) 835-MMED n (727) n FAX (800)

6 Gas Outlets/Chemetron/(NCG) SURFACE MOUNTED QUICK-CONNECT WALL STATION (top inlet, 3 5/8 (9.21 cm) centers) 349 Series # Oxygen # Medical Air # Vacuum # Nitrous Oxide # Oxygen-Blank-Medical Air # Oxygen-Blank-Vacuum # Oxygen-Blank-Nitrous Oxide # Nitrogen # Oxygen-Blank-Oxygen # Vacuum-Blank-Oxygen # Vacuum-Blank-Vacuum SURFACE MOUNTED D.I.S.S. WALL STATION (top inlet, 3 5/8 (9.21 cm) centers) 347 Series # Oxygen # Medical Air # Oxygen-Blank-Medical Air # Oxygen-Blank-Vacuum # Oxygen-Blank-Nitrous Oxide # Vacuum # Nitrous Oxide # Vacuum-Blank-Vacuum WALL (FLUSH) QUICK-CONNECT OUTLET STATION 500 Series (Field Gangable) # Oxygen # Vacuum # Medical Air # Nitrous Oxide # WAGD (Evacuation) # Carbon Dioxide # # %, 02, 5%, CO2 Blank fascia cover kit # Vacuum bottle slide Assy WALL /CEILING (FLUSH) D.I.S.S. OUTLET STATION 560 Series (Field Gangable) # Oxygen # Vacuum # Medical Air # Nitrous Oxide # Nitrogen # WAGD (Evacuation) # Carbon Dioxide # % O2, 5% CO2 # Vacuum bottle slide Assy # Blank fascia cover kit 400 Series Top Inlet # Oxygen 400 Series Bottom Inlet # # Medical Air # # Carbon Dioxide # Vacuum # # Nitrous Oxide # %O2, 5% CO2 # WAGD (Evacuation) 460 Series # Oxygen # Medical Air # Carbon Dioxide (>7%) # Vacuum # Nitrous Oxide HIGH PRESSURE NITROGEN QUICK CONNECT OUTLET STATION # Nitrogen HP (top inlet) DYNACON TYPE MERCURY MEDICAL Page 125 (800) 835-MMED n (727) n FAX (800)

7 Gas Outlets/Dual Adapters INTRODUCING THE CONNECT2 MEDICAL GAS OUTLET STATION The first medical gas outlet that accepts both Chemetron and Ohmeda adapters (patent pending design). Push button mechanism for quick adapter release. Ohmeda adapter has second method of release with twisted feature. Chemetron adapter can support secondary equipment, including a suction regulator with 1/2 gallon collection bottle. Eliminates need for hospital personnel to carry both styles of adapters to ensure proper connection. Fail-safe color coding and safety keyed to ensure appropriate gas. Valve body O-ring easily accessible for maintenance. Inlet tube has secondary check unit to permit removal of valve body without shutting off gas to the outlet. U.L. approved. NEW q q ONE OUTLET TWO ADAPTERS Ideal for institutions with more than one type of quick connect. Great for emergency departments receiving transported patients with ancillary gas services. The Right Connection For New Or Existing Structures Chemetron Adapter Ohmeda Adapter 3/8 flared connection Faceplate is safety keyed to backplate Stainless steel Push-button release Keying for Chemetron Adapter Keying for Ohmeda Adapter Chrome plated Faceplate Inlet tube capable of rotating 360 o Adjustment for various wall thicknesses CONNECT2 5 1/4 Width Oxygen # Vacuum # Medical Air # Nitrous Oxide # WAGD (Evacuation) # Carbon Dioxide # O 2 /CO 2 <7% # Wall Slide # FASCIA ASSEMBLIES CONVERT EXISTING Chemetron 500 SERIES OR 560 SERIES OUTLETS TO DUAL CAPABILITY Oxygen # Vacuum # Medical Air # Nitrous Oxide # /4 Width 2 3/4 Width Gas Outlet Fascia Outlet Fascia Oxygen # # # # Vacuum # # # # Medical air # # # # Nitrous Oxide # # # # (WAGD) Evacuation # # # # Carbon Dioxide # # # # MERCURY MEDICAL Page 126 (800) 835-MMED n (727) n FAX (800)

8 Gas Outlets/Genstar Tech (continued on next page) FEATURES: Accepts only Chemetron gas specific adapters Indexed to prevent interchangeability of gas services Universal rough-in accepts quick connection (Chemetron, Ohmeda, Puritan-Bennett ) or DISS latch valve assemblies Modular design capability 100% hydrostatically tested Complies with NFPA 99 and CGA G-4.1 standards UL Listed SPECIFICATIONS: Medical gas outlet(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC ). Wall outlet shall be designed for concealed piping installation and available for services indicated. The latch valve assembly shall be Chemetron quick connect compatible and accept only gas specific Chemetron type quick connect adapters. Each latch valve assembly shall be colorcoded for ease of gas identification per the appropriate standards (US or ISO). Latch valve assemblies shall have gas specific pin indexing corresponding to the rough-in assembly to prevent interchangeability of gas services and shall adjust up to 1 for variations in wall thickness. Universal rough-in assembly shall include the wall rough-in plate (16 ga.) with inlet tubing silver brazed to the outlet body. Inlet tubing shall be type K copper, 1/2 (12.7 mm) OD, extend 6-1/2 inches (165 mm), and swivel 360 for ease of installation. Rough-in assembly shall accept only the specified gas service by use of indexes. Rough-in assembly shall be of modular design to permit on-site ganging of multiple outlets with assurance of accurate alignment and providing 5 centerline spacing. A dust plug and cover shall be provided to protect rough-in assembly from contamination during handling and installation at the job site. Rough-in assemblies shall accept any latch valve assembly of the same gas service. The latch valve assembly shall be interchangeable, allowing conversion from one connection style to another without shutting down the medical gas system. All positive pressure gas outlets shall have a primary and secondary check valve, where the secondary valve in the rough-in assembly allows servicing of the latch valve assembly without having to disrupt gas service to the outlet. Complete outlet shall be delivered to the customer in a gas specific rough-in assembly, a matching gas specific latch valve assembly, both cleaned for oxygen use and in a sealed package, and a trim plate. All assemblies shall be 100% tested for leaks, manufactured to comply with the latest edition of NFPA 99, and UL Listed. FEATURES: Accepts only Ohmeda gas specific adapters Indexed to prevent interchangeability of gas services Universal rough-in accepts quick connection (Chemetron, Ohmeda, Puritan-Bennett ) or DISS latch valve assemblies Modular design capability 100% hydrostatically tested Complies with NFPA 99 and CGA G-4.1 standards UL Listed SPECIFICATIONS: Medical gas outlet(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC ). Wall outlet shall be designed for concealed piping installation and available for services indicated. The latch valve assembly shall be Ohmeda quick connect compatible and accept only gas specific Ohmeda type quick connect adapters. Each latch valve assembly shall be colorcoded for ease of gas identification per the appropriate standards (US or ISO). Latch valve assemblies shall have gas specific pin indexing corresponding to the rough-in assembly to prevent interchangeability of gas services and shall adjust up to 1 for variations in wall thickness. Universal rough-in assembly shall include the wall rough-in plate (16 ga.) with inlet tubing silver brazed to the outlet body. Inlet tubing shall be type K copper, 1/2 (12.7 mm) OD, extend 6-1/2 inches (165 mm), and swivel 360 for ease of installation. Rough-in assembly shall accept only the specified gas service by use of indexes. Rough-in assembly shall be of modular design to permit on-site ganging of multiple outlets with assurance of accurate alignment and providing 5 centerline spacing. A dust plug and cover shall be provided to protect rough-in assembly from contamination during handling and installation at the job site. Rough-in assemblies shall accept any latch valve assembly of the same gas service. The latch valve assembly shall be interchangeable, allowing conversion from one connection style to another without shutting down the medical gas system. All positive pressure gas outlets shall have a primary and secondary check valve, where the secondary valve in the rough-in assembly allows servicing of the latch valve assembly without having to disrupt gas service to the outlet. Complete outlet shall be delivered to the customer in a gas specific rough-in assembly, a matching gas specific latch valve assembly, both cleaned for oxygen use and in a sealed package, and a trim plate. All assemblies shall be 100% tested for leaks, manufactured to comply with the latest edition of NFPA 99, and UL Listed. MERCURY MEDICAL Page 127 (800) 835-MMED n (727) n FAX (800)

9 Gas Outlets/Genstar Tech (continued from previous page) DIMENSIONS: (Chemetron) Dimensional Data Notes: A. Additional support needed if ganging more than 3 outlets B. Wall thickness may vary from 1/2 to 1 (12.7mm to 25.4mm). C. 1/2 O.D. (3/8 Nominal) type K copper inlet tube allows 360 swivel on outlet body for entry from any angle. D. Inch (mm) ORDERING INFORMATION CHEMETRON COMPATIBLE Gas Service Item # Oxygen #ES-3823U-O Vacuum #ES-3823U-V Medical Air #ES-3823U-A Nitrous Oxide #ES-3823E-2 WAGD #ES-3823U-W Slide #ES-3820-SLD MATERIAL Latch Valve Trim Plate Rough-in Aluminum Cast Aluminum Stainless Steel ABS Plastic Powder Coating ABS Plastic Steel/Brass + Plating Neoprene Stainless Steel Steel + Plating Brass Copper Neoprene Rubber Ordering Information for Complete Wall Outlets (Includes Latch Valve Assembly, Trim Plate and Rough-in Assembly) Note: US colors listed. For ISO 32 colors replace U with E in the above catalog numbers. DIMENSIONS: (Ohmeda) Dimensional Data Notes: A. Additional support needed if ganging more than 3 outlets B. Wall thickness may vary from 1/2 to 1 (12.7mm to 25.4mm). C. 1/2 O.D. (3/8 Nominal) type K copper inlet tube allows 360 swivel on outlet body for entry from any angle. D. Inch (mm) ORDERING INFORMATION OHMEDA COMPATIBLE Gas Service Item # Oxygen #ES-3821U-O Vacuum #ES-3821U-V Medical Air #ES-3821U-A Nitrous Oxide #ES-3821E-2 WAGD #ES-3821U-W Slide #ES-3820-SLD MATERIAL Latch Valve Trim Plate Rough-in Aluminum Cast Aluminum Stainless Steel ABS Plastic Powder Coating ABS Plastic Steel/Brass + Plating Neoprene Stainless Steel Steel + Plating Brass Copper Neoprene Rubber Ordering Information for Complete Wall Outlets (Includes Rough-in, Trim Plate and Latch Valve Assembly) Note: US colors listed. For ISO 32 colors replace U with E in the above catalog numbers. MERCURY MEDICAL Page 128 (800) 835-MMED n (727) n FAX (800)

10 Gas Outlets/Genstar Tech (continued on next page) American Medical Gas Outlets Gentec Medical Gas Outlets shall be UL Listed, cleaned for medical gas service, and compliant to the latest edition of NFPA 99. They shall accept only corresponding Ohmeda, DISS, Chemetron, or Puritan Bennett style quick connect adapters. Outlets are designed with an universal rough-in assembly for interchangeability on different quick connects without removing the entire outlet. For outlets providing positive pressure gas, they shall have a primary and secondary check valve, where the secondary check valve allows for servicing without isolating an entire zone. Latch Valve Assembly (front) The latch-valve assembly shall have gas specific index corresponding to the gas service on the rough-in assembly to prevent interchanging of gas service. Each latch-valve assembly shall be color coded for it s specified gas service. Latch Valve Assembly + Rough-In Assembly = Complete Assembly Rough-In Assembly (back) The rough-in assembly shall be manufactured using (1/2" O.D.) type K copper tubing, silver-brazed to the outlet body. The tubing allows 360 degrees swivel on the outlet body for easy installation. Rough-in assembly is manufactured to accept only the specified gas service by use of indexes. Features Accepts only Ohmeda, DISS, Chemetron, or Puritan Bennett style gas specific adapters Unique pin index for gases to prevent interchanging of gas service Universal rough-in assembly Color-coded for easy gas identification 360 swivel on the inlet pipe for easy installation UL listed and complies to the latest edition of NFPA 99 Type K, 3/8" size copper tubing [1/2" real O.D. (12.7mm)] 100% hydrostatically tested FEATURES: Accepts only DISS gas specific adapters Indexed to prevent interchangeability of gas services Universal rough-in accepts quick connection (Chemetron, Ohmeda, Puritan-Bennett ) or DISS latch valve assemblies Modular design capability 100% hydrostatically tested Complies with NFPA 99 and CGA G-4.1 standards UL Listed SPECIFICATIONS: Medical gas outlet(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC ). Wall outlet shall be designed for concealed piping installation and available for services indicated. The latch valve assembly shall be Compressed Gas Association (CGA) Diameter Index Safety System (DISS) threaded connectors and accept only corresponding gas specific type nut and nipple adapters. Each latch valve assembly shall be color-coded for ease of gas identification per the appropriate standards (US or ISO). Latch valve assemblies shall have gas specific pin indexing corresponding to the rough-in assembly to prevent interchangeability of gas services and shall adjust up to 1 for variations in wall thickness. Universal rough-in assembly shall include the wall rough-in plate (16 ga.) with inlet tubing silver brazed to the outlet body. Inlet tubing shall be type K copper, 1/2 (12.7 mm) OD, extend 6-1/2 inches (165 mm), and swivel 360 for ease of installation. Rough-in assembly shall accept only the specified gas service by use of indexes. Rough-in assembly shall be of modular design to permit on-site ganging of multiple outlets with assurance of accurate alignment and providing 5 centerline spacing. A dust plug and cover shall be provided to protect roughin assembly from contamination during handling and installation at the job site. Rough-in assemblies shall accept any latch valve assembly of the same gas service. The latch valve assembly shall be interchangeable, allowing conversion from one connection style to another without shutting down the medical gas piping system. All positive pressure gas outlets shall have a primary and secondary check valve, where the secondary valve in the rough-in assembly allows servicing of the latch valve assembly without having to disrupt gas service to the outlet. Complete outlet shall be delivered to the customer in a gas specific rough-in assembly, a matching gas specific latch valve assembly, both cleaned for oxygen use and in a sealed package, and a trim plate. All assemblies shall be 100% tested for leaks, manufactured to comply with the latest edition of NFPA 99, and UL Listed. FEATURES: Accepts only Puritan-Bennett gas specific adapters Indexed to prevent interchangeability of gas services Universal rough-in accepts quick connection (Chemetron, Ohmeda, Puritan-Bennett ) or DISS latch valve assemblies Modular design capability 100% hydrostatically tested Complies with NFPA 99 and CGA G-4.1 standards UL Listed SPECIFICATIONS: Medical gas outlet(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC ). Wall outlet shall be designed for concealed piping installation and available for services indicated. The latch valve assembly shall be Puritan-Bennett quick connect compatible and accept only gas specific Puritan-Bennett type quick connect adapters. Each latch valve assembly shall be color-coded for ease of gas identification per the appropriate standards (US or ISO). Latch valve assemblies shall have gas specific pin indexing corresponding to the rough-in assembly to prevent interchangeability of gas services and shall adjust up to 1 for variations in wall thickness. Universal rough-in assembly shall include the wall rough-in plate (16 ga.) with inlet tubing silver brazed to the outlet body. Inlet tubing shall be type K copper, 1/2 (12.7 mm) OD, extend 6-1/2 inches (165 mm), and swivel 360 for ease of installation. Rough-in assembly shall accept only the specified gas service by use of indexes. Rough-in assembly shall be of modular design to permit on-site ganging of multiple outlets with assurance of accurate alignment and providing 5 centerline spacing. A dust plug and cover shall be provided to protect roughin assembly from contamination during handling and installation at the job site. Rough-in assemblies shall accept any latch valve assembly of the same gas service. The latch valve assembly shall be interchangeable, allowing conversion from one connection style to another without shutting down the medical gas system. All positive pressure gas outlets shall have a primary and secondary check valve, where the secondary valve in the rough-in assembly allows servicing of the latch valve assembly without having to disrupt gas service to the outlet. Complete outlet shall be delivered to the customer in a gas specific rough-in assembly, a matching gas specific latch valve assembly, both cleaned for oxygen use and in a sealed package, and a trim plate. All assemblies shall be 100% tested for leaks, manufactured to comply with the latest edition of NFPA 99, and UL Listed. MERCURY MEDICAL Page 129 (800) 835-MMED n (727) n FAX (800)

11 Gas Outlets/Genstar Tech (continued from previous page) DIMENSIONS: (DISS) Dimensional Data Notes: A. Additional support needed if ganging more than 3 outlets B. Wall thickness may vary from 1/2 to 1 (12.7mm to 25.4mm). C. 1/2 O.D. (3/8 Nominal) type K copper inlet tube allows 360 swivel on outlet body for entry from any angle. D. Inch (mm) ORDERING INFORMATION DISS STANDARD Gas Service Item # Oxygen #ES-3822U-O Vacuum #ES-3822U-V Medical Air #ES-3822U-A Nitrous Oxide #ES-3822E-2 WAGD #ES-3822U-W Carbon Dioxide #ES-3822E-C Nitrogen #ES-3822E-N Slide #ES-3820-SLD MATERIAL Latch Valve Trim Plate Rough-in Aluminum Cast Aluminum Stainless Steel ABS Plastic Powder Coating ABS Plastic Steel/Brass + Plating Neoprene Stainless Steel Steel + Plating Brass Copper Neoprene Rubber Ordering Information for Complete Wall Outlets (Includes Rough-in, Trim Plate and Latch Valve Assembly) Note: US colors listed. For ISO 32 colors replace U with E in the above catalog numbers. DIMENSIONS: (Puritan-Bennett) Dimensional Data Notes: A. Additional support needed if ganging more than 3 outlets B. Wall thickness may vary from 1/2 to 1 (12.7mm to 25.4mm). C. 1/2 O.D. (3/8 Nominal) type K copper inlet tube allows 360 swivel on outlet body for entry from any angle. D. Inch (mm) ORDERING INFORMATION PURITAN-BENNETT COMPATIBLE Gas Service Item # Oxygen #ES-3824U-O Vacuum #ES-3824U-V Medical Air #ES-3824U-A Nitrous Oxide #ES-3824E-2 WAGD #ES-3824U-W Slide #ES-3820-SLD MATERIAL Latch Valve Trim Plate Rough-in Aluminum Cast Aluminum Stainless Steel Zinc Alloy Powder Coating ABS Plastic ABS Plastic Neoprene Steel + Plating Steel + Plating Stainless Steel Copper Brass Neoprene Rubber Ordering Information for Complete Wall Outlets (Includes Rough-in, Trim Plate and Latch Valve Assembly) Note: US colors listed. For ISO 32 colors replace U with E in the above catalog numbers. MERCURY MEDICAL Page 130 (800) 835-MMED n (727) n FAX (800)

12 Gas Outlets/Oxequip Oxequip Med*Star Quick-Connect Medical Gas Outlets Elements Safety keyed to prevent cross-connections Conforms to NFPA 99 and CSA standards Accepts Med*Star and 07 Series Adapters Modular design Cleaned for oxygen service UL Listed Description The Oxequip Med*Star Series outlet stations provide convenient access to medical gases in patient care locations. They are fully compatible with Med*Star and 07 Series adapters. The outlets can be grouped together in any order desired by the facility. Outlets are spaced 5" (12.7 cm) center to center. Outlet finish plates and rough-in plates are pin indexed using steel pins for positive cross-connection prevention. Valve bodies are separate from the finish plate, allowing easy testing for leaks and cross connection, and contain a self-sealing poppet. Valve bodies are field adjustable to compensate for variations in plaster thickness of 12.7 mm (1/2") to 19 mm (3/4"). The mm (6") Type K copper inlet tube has a 9.5 mm (3/8") ID (12.7 mm (1/2") OD) connection, and can rotate 360 degrees to accommodate any field piping arrangement. The primary gas check can be serviced without shutting off the gas supply. The cam plate contains a positive latching mechanism to retain the adapter in the outlet. The adapter is removed by operating the release mechanism which is integral to the Med*Star adapter ( 07 Series adapters use the twist mechanism). All components (cam plate, tumbler, valve body, poppet, faceplate) are individually field replaceable. The outlet stations are fully compliant with NFPA 99 (2002) and CSA Z-305, and are cleaned for oxygen service in accordance with CGA G-4.1. The outlet is UL listed. Rough-in plates for the outlets are zinc plated steel for corrosion resistance and fire safety. Finish plates are die-cast zinc, chrome-plated with brushed stainless inserts for appearance. Gas identification is provided by a polycarbonate plastic insert, color-coded by gas service. The cam plate/tumbler assembly is color-coded and labeled for the gas service. Release is easily accomplished with one hand using the adapter release mechanism. The primary valve poppet provides a dust proof seal. Vacuum outlets may be used with or without slide brackets for vacuum collection bottles of up to 2 liters (1/2 gallon) capacity (where slides are used, provide one per vacuum outlet). Dimensional Data Ordering Information Gas Service Item # (US Color Codes) Oxygen # Vacuum # Air # Nitrous Oxide # WAGD # Carbon Dioxide # Slide Bracket # A MERCURY MEDICAL Page 131 (800) 835-MMED n (727) n FAX (800)

13 Gas Outlets/Oxequip Oxequip Med*Star DISS Medical Gas Outlets Elements Safety keyed to prevent cross-connections Conforms to NFPA 99 and CSA standards Modular design Cleaned for oxygen service UL Listed Description The Oxequip Diameter Index Safety System (DISS) Series outlet stations provide convenient access to medical gases in patient care locations. They are fully compatible with DISS style diameter indexed threaded adapters. The outlets can be grouped together in any order desired by the facility. Outlets are spaced 5" (12.7 cm) center to center. Outlet finish plates and rough-in plates are pin indexed using steel pins for positive cross-connection prevention. The chrome-plated brass valve bodies contain a self-sealing poppet, and are separate from the finish plate, allowing easy testing for leaks and cross connection. Valve bodies are field adjustable to compensate for variations in plaster thickness of 12.7 mm (1/2") to 19 mm (3/4"). The mm (6") Type K copper inlet tube has a 9.5 mm (3/8") ID (12.7 mm (1/2") OD) connection, and can rotate 360 degrees to accommodate any field piping arrangement. The primary gas check can be serviced without shutting off the gas supply. The outlet stations are fully compliant with NFPA 99 (2002) and CSA Z-305, and are cleaned for oxygen service in accordance with CGA G-4.1. The outlet is UL listed. Rough-in plates for the outlets are zinc plated steel for corrosion resistance and fire safety. Finish plates are die-cast zinc, chrome-plated with brushed stainless inserts for appearance. Gas identification is provided by a polycarbonate plastic insert, color-coded by gas service. Vacuum outlets may be used with or without slide brackets for vacuum collection bottles of up to 2 liters (1/2 gallon) capacity (where slides are used, provide one per vacuum outlet). Dimensional Data Ordering Information Gas Service Item # (US Color Codes) Oxygen # Vacuum # Air # Nitrous Oxide # WAGD # Carbon Dioxide # Nitrogen # Slide Bracket # A MERCURY MEDICAL Page 132 (800) 835-MMED n (727) n FAX (800)

14 Gas Outlets/Schrader Flush Mounted Twist Sleeve Wall Outlets # Single wall outlet for oxygen # Single wall outlet for nitrous oxide # Single wall outlet for vacuum # Single wall outlet for medical air MERCURY MEDICAL Page 133 (800) 835-MMED n (727) n FAX (800)

15 Gas Outlets/Tri-Tech QUICK-CONNECT (OHMEDA COMPATIBLE) #GP-Q1132 #GP-Q1124 #GP-Q1122 #GP-Q1116 #GP-Q1104 WAGD (evacuation) recessed outlet Oxygen recessed outlet Vacuum recessed outlet Medical air recessed outlet Nitrous Oxide recessed outlet #GP-Q2132 #GP-Q2124 #GP-Q2122 #GP-Q2116 #GP-Q2104 WAGD (evacuation) exposed outlet Oxygen exposed outlet Vacuum exposed outlet Medical air exposed outlet Nitrous Oxide exposed outlet D.I.S.S. WALL OUTLETS #GP-F1132 #GP-F1124A #GP-F1122 #GP-F1116 #GP-F1112 #GP-F1104 WAGD (evacuation) recessed outlet Oxygen recessed outlet Vacuum recessed outlet Medical air recessed outlet Nitrogen recessed outlet Nitrous Oxide recessed outlet #GP-F2132 #GP-F2124A #GP-F2122 #GP-F2116 #GP-F2112 #GP-F2104 WAGD (evacuation) exposed outlet Oxygen exposed outlet Vacuum exposed outlet Medical air exposed outlet Nitrogen exposed outlet Nitrous Oxide exposed outlet #GP-F1144 Slide Bracket for recessed outlets MERCURY MEDICAL Page 134 (800) 835-MMED n (727) n FAX (800)

16 Gas Outlets/AMICO CHEMETRON COMPATIBLE WALL OUTLETS CEILING OUTLETS OXYGEN MEDICAL AIR VACUUM NITROUS OXIDE WAGD (EVACUATION) VAC. SLIDE AM-OCHWALU-OXY AM-OCHWALU-AIR AM-OCHWALU-VAC AM-OCHWALU-N 2 O AM-OCHWALU-EVA AM-OWALSLIDE N/A N/A N/A N/A N/A N/A OHMEDA COMPATIBLE OXYGEN MEDICAL AIR VACUUM NITROUS OXIDE WAGD (EVACUATION) VAC. SLIDE WALL OUTLETS AM-OQDWALU-OXY AM-OQDWALU-AIR AM-OQDWALU-VAC AM-OQDWALU-N 2 O AM-OQDWALU-EVA AM-OWALSLIDE CEILING OUTLETS N/A N/A N/A N/A N/A N/A PURITAN-BENNETT COMPATIBLE WALL OUTLETS CEILING OUTLETS OXYGEN MEDICAL AIR VACUUM NITROUS OXIDE WAGD (EVACUATION) VAC. SLIDE AM-OPBWALU-OXY AM-OPBWALU-AIR AM-OPBWALU-VAC AM-OPBWALU-N 2 O AM-OPBWALU-EVA AM-OWALSLIDE N/A N/A N/A N/A N/A N/A D.I.S.S. DIAMETER INDEX SATY SYSTEM OXYGEN MEDICAL AIR VACUUM NITROUS OXIDE NITROGEN CARBON DIOXIDE WAGD (EVACUATION) INSTRUMENT AIR VAC. SLIDE WALL OUTLETS AM-ODISWALU-OXY AM-ODISWALU-AIR AM-ODISWALU-VAC AM-ODISWALU-N 2 O AM-ODISWALU-NIT AM-ODISWALU-CO 2 AM-ODISWALU-EVA AM-ODISWALU-INA AM-OWALSLIDE CEILING OUTLETS AM-ODISCELU-OXY AM-ODISCELU-AIR AM-ODISCELU-VAC AM-ODISCELU-N 2 O AM-ODISCELU-NIT AM-ODISCELU-CO 2 AM-ODISCELU-EVA MERCURY MEDICAL Page 135 (800) 835-MMED n (727) n FAX (800)

17 Gas Outlets/Beacon Medaes/Breakdowns/Diamond I Series Keying Disc (Item #15) is held in place by 2 screws Description Item Number 1. Box # Spring Clip # Primary Check Spring # (10 Pkg) # Inlet Screen # Secondary Ball Check # Secondary Check Spring # (10 Pkg) # Secondary Check O-ring # (10 Pkg) # O-ring # (10 Pkg) # Retainer; Vacuum # Pressure Gases # Quad Ring # (10 Pkg) # Locking Spring # Primary Check O-ring # (10 Pkg) # Piston # Screw # Keying Disc with Ears Oxygen # Nitrous Oxide # Vacuum # Medical air (Black) # Medical air (Yellow) # Evacuation # Carbon Dioxide # Keying Disc Without Ears Oxygen # Nitrous Oxide # Vacuum # Medical air (Yellow) # Medical air (Black) # WAGD (Evacuation) # Carbon Dioxide # Screw, Keying Disc # Name Plate Label Oxygen # Nitrous Oxide # Vacuum # Medical air (Black) # Medical air (Yellow) # Screw, Name Plate # Name Plate # Primary Check Body New Style; for use with Plastic Keying Disc # Old Style; For use with metal keying disc # Maintenance Kit # Pressure and Vacuum Includes 1 each of Items #3,6,7,8,10,11 MERCURY MEDICAL Page 136 (800) 835-MMED n (727) n FAX (800)

18 Gas Outlets/Beacon Medaes/Breakdowns/Diamond II Series Repair parts are no longer available for Diamond II outlets. These outlets must be converted to a Diamond III outlet to correct problems. 3 EASY STEPS 1. Select appropriate Conversion Kit(s); Pressure gases (O2, N2O, Medical air & CO2) # Vacuum & Evacuation # Above Kits include10 each of Item # s 3, 5, 6 & 7 2. Order desired quantity of secondary check units, Item number 4 below # Select appropriate finishing assembly Oxygen # Nitrous Oxide # Vacuum # Medical air # Carbon Dioxide # WAGD (Evacuation) # MERCURY MEDICAL Page 137 (800) 835-MMED n (727) n FAX (800)

19 Gas Outlets/Breakdowns/Diamond III Series Diamond III Series (Stamped with 300 Series Number on Back Side of Cover Plate, #14) Description Item Number Description Item Number 1. Back Body # O-ring # Spring, bronze for Pressure Gases (10 Each) # Stainless Steel for Vacuum and WAGD (10 each) # Secondary Check # O-ring (10 each) # Rubber Bushing (10 Each) # Ring, 1 Spirolex (10 Each) # Back Plate 9. Screw, 8 x 5/8 (2) # Ring, Spirolex # Spring (10 Each) # PG 12. Piston (10 Each) # Gasket (2) # Cover Plate (with logo) # Front Body Cylinder # O-ring (10 Each) # Washer # Lock-in Adapter Spring # (10 Each) 19. Detail for replacing spring assembly 20. Keying Disc Wall Mounted Console Mounted Oxygen # # Nitrous Oxide # # Vacuum # # Medical Air # # Carbon Dioxide # N/A WAGD (Evacuation) # N/A Nitrogen N/A N/A 21. Eyelet (2), (50 Each) # Finish Plate # Screw, 6-32 x 1-1/2 (2) # Secondary Check Repair Kit for 10 Outlets 10 Each of items 3, 5, 6 and 7 for Pressure Gases # Secondary Check Repair Kit for 10 Outlets 10 Each of items 3, 5, 6 and 7 for Vacuum and WAGD # PG Primary Check Repair Kit for 10 Outlets Repair Kit with 10 Each of items 5, 11 12, 16, 17 and 18; and 30 each of item 21 # PG MERCURY MEDICAL Page 138 (800) 835-MMED n (727) n FAX (800)

20 Gas Outlets/Beacon Medical (Puritan-Bennett) Series A 3 6 Quick Connect D.I.S.S SEE next page for ordering Numbers MERCURY MEDICAL Page 139 (800) 835-MMED n (727) n FAX (800)

21 Gas Outlets/Beacon Medical (Puritan-Bennett) Series A Repair Parts for Series A Outlets are available on a limited basis. Outlets requiring obsolete parts can be updated. PART ITEM NUMBER DESCRIPTION 3. # Screw (Tie Bar) 4. # Tinnerman 6/32 Speed nut 6. # Screw (Block Mounting) 8. # Shoulder Screw 10. # D.I.S.S. Valve (O2) # D.I.S.S. Valve (N2O) # D.I.S.S. Valve (Medical air) # D.I.S.S. Valve (Vac) # Quick Connect Valve (O2) # Quick Connect Valve (N2O) # Quick Connect Valve (Medical air) # Quick Connect Valve (Vac) 11. # Escutcheon (Single) # Escutcheon (Double) # Escutcheon (Triple) # Escutcheon (Quad) # Escutcheon (Quint.) 12. # D.I.S.S.-Insert Plate Assy. (O2) (Includes Dust # D.I.S.S.-Insert Plate Ass. (N2O Cover/Chain) # D.I.S.S.-Insert Plate Assy. (Medical air) # D.I.S.S.-Insert Plate Assy. (Vac) # D.I.S.S.-Insert Plate Assy. (N2) # Q.C. - Insert Plate Assy. (O2) # Q.C. - Insert Plate Assy. (N2O) # Q.C. - Insert Plate Assy. (Medical air) # Q.C. - Insert Plate Assy. (Vac) 14. # Dust Cover & Chain Assy. (O2) # Dust Cover & Chain Assy. (N2O, Medical air, Vac, N2) MERCURY MEDICAL Page 140 (800) 835-MMED n (727) n FAX (800)

22 Gas Outlets/Breakdowns/Chemetron (NCG) 500 SERIES Quick Connect Model Description 1. 6 copper tube connection to medical gas or vacuum supply line. 2. Swivel base housing 3. Back box (Field replacement of items 1, 2 and 3 is not feasible). 4. Secondary check kit (6 pk): A. Secondary check B. Washer C. Housing D. Deflator spring assembly 5. Housing base O-Ring (12/pk) 6. Poppet 7. Poppet O-Ring(12/pk) 8. Valve body assemblies (poppet and O-Rings) Valve body with poppet pressure Valve body with poppet vacuum Valve body with poppet pressure (4 pk) 9. Valve body O-ring (12/pk) 10. Face plate assemblies: Oxygen Nitrous Oxide Vacuum Medical Air WAGD (Evacuation) CO2 O2/CO2 11. Latch spring kit (12 pk) 12. Faceplate mounting screw kit (48/pk) 13. Vacuum spring kit (6/pk) 14. Test plug kit (12pk) 15. Back box mounting screw/fastener kit (24pk) Item Number # # # # # # # # # # # # # # # # # # # # D.I.S.S. Model Description 16. D.I.S.S. poppet all service except Oxygen, vacuum, evacuation 17. D.I.S.S. poppet oxygen, vacuum, evacuation 18. D.I.S.S. valve body, key ring and poppet assembly: Oxygen Nitrous Oxide Vacuum Medical Air WAGD (Evacuation) N2 CO2 O2/CO2 19. D.I.S.S. Face Plate Assemblies: Oxygen Nitrous Oxide Vacuum Medical Air WAGD (Evacuation) N2 CO2 O2/CO2 20. D.I.S.S. face plate screw kit (24/pk). 21. D.I.S.S. dust cap and chain assembly: Oxygen Nitrous Oxide Vacuum Medical Air 22. D.I.S.S. poppet O-Ring only Item Number # # # # # # # # # # # # # # # # # # # # /Pk # /Pk # /Pk # /Pk # /Pk Figure #1 - Initial Setting Lightly lubricated* O-Ring shown loaded around rod and in installer assembly cavity. Figure #2 - Operation Slide bracket assembly up or down until rod lines up with center of poppet. # O-Ring installation tool only *Medical Gas Outlet Lubrication (1 ox.) # MERCURY MEDICAL Page 141 (800) 835-MMED n (727) n FAX (800)

23 Gas Outlets/Breakdowns/Chemetron (NCG) 348, 378, 400 Series D.I.S.S. Quick Connect Description 348 Series 378 Series 400 Series (Discontinued) Item Number Description Item Number Description Item Number 1. 6 Copper tube for connection N/A to gas or vacuum supply line 2. Mounting Box N/A 3. Back box (Field replacement of items 1,2 N/A and 3 are not feasible) 4. Mounting block O-ring # /Pk 5. Secondary check valve # * 6/Pk 6. Secondary check washer # /Pk 7. Housing # Housing O-Ring # /Pk 9. Secondary check spring # * 6/Pk 10. Vacuum Spring # /Pk 11. Test Plug # /Pk 12. Poppet # Poppet O-Ring # /Pk 14. Valve body, # /Pk Quick-connect (Pressure without poppet) Valve body, # Quick-connect (Vacuum without poppet) Valve body assembly, # (Pressure, Quick-connect with poppet) Valve body assembly, # (Vacuum, Quick-connect with poppet) 15. Valve body O-Ring # /Pk *Chemetron Outlet Stations manufactured with rear entry of pigtail (1) use Secondary Check Valve Catalog No. # Items 5 & 9 make up kit, 6 kits/pk 16. Face plate springs # /Pk 17. Latch button (indicia) # /Pk 378, 400 series only (Oxygen) # /Pk (Vacuum) # /Pk (Medical air) # /Pk (Nitrous Oxide) 348 Series Only # /Pk (Oxygen) # /Pk (Vacuum) # (Medical air) 6/Pk # /Pk (Nitrous Oxide) 18. Face Plate Series # (Oxygen) # (Vacuum) # (Medical air) # (Nitrous Oxide) # (Carbon Dioxide) # (Oxygen/CO2) # WAGD (Evac.) Ceiling Column Faceplate # WAGD (Evac.) 19. Face plate screws # /Pk 20. Poppet # (Oxygen and vacuum) 21. Poppet # (N2O, Medical air, CO2) 22. Poppet O-Ring, D.I.S.S # /Pk 23. Valve Body # (Oxygen) # (Vacuum) # (Nitrous Oxide) # (Medical air) 24. Face Plate -460 Series # (Oxygen) # (Vacuum) # (Medical air) # (Nitrous oxide) 25. Latch Button # (Oxygen) 6/Pk # (Vacuum) 6/Pk # (Medical air) 6/Pk # (Nitrous Oxide) 6/Pk 26. Face plate screws # /Pk 27. Dust cap and chain # (Oxygen) 6/Pk # (Vacuum) 6/Pk # (Nitrous Oxide) 6/Pk # (Medical air) 6/Pk 28. O-Ring Kit. # (Consists of 12 each. of items 4, 13, 15) MERCURY MEDICAL Page 142 (800) 835-MMED n (727) n FAX (800)

24 Gas Outlets/Breakdowns/Oxequip 07 (O.E.S.) SERIES QUICK CONNECT Repair components are limited. Existing outlets may be modernized/converted from the detailed list below. All conversions require additional purchase of drill indexing template(s) for each gas. Parts for 07 Series are available on a limited basis. Modernizations/Conversions (Requires use of drill indexing template) 07 SERIES Q.C. & D.I.S.S. TO Med*Star D.I.S.S. Item Number Description # H Oxygen (Template not included) # J Vacuum (Template not included) # K Nitrous Oxide (Template not included) # M Nitrogen (Template not included) # L Medical air (Template not included) 07 SERIES Q.C. & D.I.S.S. TO Med*Star Q.C. # C Oxygen (Template not included) # C Vacuum (Template not included) # C Nitrous Oxide (Template not included) # C Medical air (Template not included) (Nitrogen not Available) Med*Star Drill Indexing Templates Must be used when changing 07 Series to Med*Star # G # G # G # G # G Oxygen, drill indexing template Vacuum, drill indexing template Nitrous Oxide, drill indexing template Medical air, drill indexing template Nitrogen, drill indexing template Description Item Number Description Item Number 1. Coverplate Screw Seat Washer Coverplate 8. Slide Valve Oxygen B 9. Slide Valve Spring Nitrous Oxide B pressure Medical Air B vacuum Vacuum B 10.+ Ball Check Retainer 3. Overhang Spacer Bushing Depth Spacer Ball Check O Ring Camplate Assembly M 12.+ Ball Check Seat Retainer Bushing 13.+ Ball Check Spring Oxygen Outlet Body Nitrous Oxide Medical Air Vacuum Med*Star QUICK-CONNECT COMPONENT IDENTIFICATION A Med*Star D.I.S.S. COMPONENT IDENTIFICATION B A B A. Pressure Outlet Slide # Y Valve Assembly B. Pressure Outlet Internal # X Parts Kit A. Pressure Outlet Slide # Y Valve Assembly B. Pressure Outlet Internal # X Parts Kit Detail No. Description Item Number 1. Coverplate Screw 24/PK # RPL 2. Coverplate Tapered side # P Straight # X 4. Depth Spacer # Camplate Assembly 5/PK # M-RPL 6. Molded Dust Cover # Color-coded Pin-Indexed Tumbler oxygen # nitrous oxide # medical air # vacuum # Seat Washer # Slide Valve # Slide Valve Spring pressure # vacuum # Ball Check Retainer Bushing # W with Seal 12.+ Ball Check # Ball Check Spring # Outlet Body N/A + Not used in vacuum outlets. ++ Not used on ceiling outlets. Detail No. Description Item Number 1. Coverplate Screw # Dust Cap and chain Oxygen # A All others # T 3. Coverplate tapered side # P straight side # X 4. Depth Spacer # Color-coded Pin Indexed Tumbler oxygen # A nitrous oxide # C medical air # D vacuum # B nitrogen # E 6. Depressor Tube oxygen (1-3/ mm) # all others (1-5/ mm) # Seat Washer # Slide Valve # Slide Valve Spring pressure # vacuum # Ball check Retainer Bushing With seal # W 11.+ Ball Check # Ball Check Spring # Outlet Body N/A + Not used in vacuum outlets. ++ Not used on ceiling outlets. MERCURY MEDICAL Page 143 (800) 835-MMED n (727) n FAX (800)