Dualog Connection Suite 2.10 Upgrade Notice

Transcription

1 Dualog Connection Suite 2.10 Upgrade Notice Author Kristian Olsen Date Description Revision Number 1.1 Important notices when upgrading to Connection Suite 2.10 Dualog AS (Head Office) Alkeveien 14 N-9015 Tromsø Norway

2 able of Contents 1 Introduction Upgrading to Connection Suite Upgrading Connection Suite Standard Upgrading DuaCore Pro Upgrading PortMapper and DHCP server Services running after the upgrade New features in Connection Suite New basic Functionality - overview New WebMail LDAP Server New and improved Extensions Web4Sea AntiVirus DuaCore Pro Configuring new features User group configuration Antivirus WebMail and configuration LDAP Server Page 2 of 11

3 1 Introduction With Connection Suite 2.10 Dualog AS introduce numerous new features and improvements from previous version. This document describes important issues to take into consideration when upgrading and configuring, where to find new features and changes to previous functionality. A short description of what is new and how to use new features is also included. Also the shore side of Connection Suite, is upgraded accordingly. This document does not describe the new features available on 2 Upgrading to Connection Suite 2.10 When installing on Windows 7 and server versions of Windows, it important that the installation is run when logged in as local admin. Please note that from 2.10 a new installation tool is now in use for installation of Connection Suite Standard and DuaCore Pro. This does not influence the users experience. PortMapper and DHCP server is already using the new installation tool. 2.1 Upgrading Connection Suite Standard When upgrading to Connection Suite Standard to version 2.10, no special action is required during upgrade. The installation program will shut down all services, upgrade databases and other sources, and start the new services after upgrade. All new configuration options will be downloaded on the first connects, so it is important to do several manual connects after the installation is completed. 2.2 Upgrading DuaCore Pro In version 2.10 there are new low-level drivers for DuaCore Pro. To avoid any problems, a uninstall of DuaCore Pro is required before installing DuaCore Pro 2.10 Also, it is important that Connection Suite Standard 2.10 is installed BEFORE installing DuaCore Pro 2.10: 1. Upgrade to Connection Suite 2.10 Standard 2. Uninstall DuaCore Pro. 3. Reboot computer 4. Install DuaCore Pro 2.3 Upgrading PortMapper and DHCP server No major changes are made to PortMapper and DHCP server in version Upgrade is straight-forward, so no special action is required. Page 3 of 11

4 2.4 Services running after the upgrade The following services related to Connection Suite should be running after the upgrade. Please note that Services installed for extensions is not in this list.: Name Decsription Function Dualog Service Manager Dualog service that controls traffic Main service, controlling communication, Least Cost Routing, mailserver and other services DualogConfigBeacon Dualog service providing config information to remote components. Only in use when running Connection Suite Services on remote computers. Delivers configuration settings from the Oracle Database DualogConnectionSuiteWebServer Serving the Dualog connection suite clients WebServer handling Connection Suite Flash GUI Dualog Apache Server Apache/ (Win32) PHP/5.3.1 WebServer handling WebMail Dualog Connection Suite LDAP Server Dualog Connection Suite LDAP Service Address book server Dualog PortMapper Service Dualog service controlling low level communication Optional. Can also be installed on remote computers to let Connection Suite access COM-ports on other computers OracleServiceXE Oracle database storing configuration and traffic data OracleXEClrAgent OracleXETNSListener Page 4 of 11

5 3 New features in Connection Suite 2.10 Several new functions and Extensions have been added to Connection Suite Some of which will be automatically available in our standard package, others as Connection Suite Extensions. 3.1 New basic Functionality - overview New WebMail WebMail is now available from My page: Click on the WebMail menu item to access WebMail. Page 5 of 11

6 The new WebMail contain several new features, in addition to improvements from the old WebMail: Create your own folders, with subfolders Save messages as drafts Utilizes the new IMAP Server included in Connection Suite Utilizes the new LDAP server included in Connection Suite Improvements in handling/controlling messages in inbox HTML or plain text editor Drag-and-drop messages between folders User interface resizable LDAP Server The LDAP (Lightweight Directory Access Protocol) server makes the Connection Suite Address Book and list of users available for external clients, as well as the new WebMail application in Connection Suite. For 2.10, only read is implemented, so it is not possible to edit or add entries to the database. This will be available in a later version of Connection Suite. 3.2 New and improved Extensions Extensions are additional services to be added to the Connection Suite installation. Most Extensions are supplied as separate installation programs. The following new extensions are available in Connection Suite Web4Sea Dualog Web4Sea is a new service developed to control and optimize web activities. It is recommended to run Web4Sea together with DuaCore pro, to get an optimal setup for controlling IP traffic. Web4Sea is a maritime Web proxy with additional features to control each user s access to internet: Access rights per communication system Cache only access Content filtering Traffic shaping AntiVirus Dualog has not invented its own Antivirus system. Dualog Antivirus is using the ESET NOD32 antivirus client, by integrating it into Connection Suite in terms of pattern distribution, installation and control of versions onboard ships. Installation of onboard software is described in separate documents. Please note that there is a separate installation for server (where the Connection Suite installation resides) and client computers onboard the ship. Pattern distribution is optimized to reduce cost, as files distributed are reduced to a minimum. No IP connection is required to distribute patterns to ships, and can therefore be sent on any communication system. Page 6 of 11

7 When new updates are received onboard ships, an acknowledgement is returned to shore, giving administrators the opportunity to monitor each ship installation on dualog.net. Distribution of patterns and acknowledgements are displayed in the figure below: DuaCore Pro Based on feedback from our customers, several improvements are now available in DuaCore Pro. Also, several critical bugs are now fixed. We urge every customer to upgrade to DuaCore Pro version 2.10 as soon as possible. Main new features: Compatible with Windows 7, Windows 2003 Server, Windows 2008 Server Possible to set several destination addresses (IP addresses) per rule Possible to add several IP ports per service Bug fixes in handling of Least Cost Routing and communication failover. 3.3 Configuring new features Some of the improvements made from previous versions require configuration changes before they are available for users. It is important to note that these changes can be made on shore, and will be replicated to ships when an upgrade is finalized. Please be aware that several connections are required before configuration is synchronized and all updates are available on the ship. When all updates are available, please do a logout-login in the Connection Suite user interface. Page 7 of 11

8 3.3.1 User group configuration As new functions are available, User Group Function Access must be modified according to company policy. It is important to notice that these settings must be changed on shore (dualog.net). The following new functions are available: Antivirus Ship overview (dualog.net only) Web4Sea Web4Sea Company Web4Sea Traffic WebMail various duplicates will appear in the list Default configuration when new features are introduced is No access. For each user group, please make sure that new features are made available for those user groups intended to see the new features Antivirus All Antivirus configurations have to be done by Dualog AS. Please contact Dualog to subscribe to this service. Page 8 of 11

9 3.3.3 WebMail and configuration With the introduction of new WebMail and IMAP Server, configuration of has changed radically from previous versions. New options are available, but most importantly, more configuration options must be set per user group. The net result is that user group access together with ships configuration sets what system a user have access to. When upgrading, most re-configuring for the new platform is automatically performed by the installation program. However it is advised to check that all configurations are according to requirements: User group access In 2.10 there are three different ways of handling received POP3 For use with external standalone clients SMTP Relay Relaying to 3 rd party mail servers like Microsoft Exchange or Lotus Domino Server onboard the ships IMAP4 Currently only available for WebMail. Must be ticked for all Webmail users (groups) The most common configuration is shown in the screen below. Page 9 of 11

10 configuration For each ship, available systems must be set. The available options are equal to those set per User Group (section ). In the list each User Group s access to services can then be configured. Available options will be set depending on ships availability and User Group access. In a normal situation no configuration is required as available options will be enabled. The following configuration must be set, depending on systems selected: POP3: When using external clients like Outlook, Outlook Express, Windows Mail or Thunderbird Hostname (IP address of computer running Connection Suite) SMTP port, normally 25 POP3 port, normally 110 IMAP4: Optional: LDAP port, only if Connection Suite Address Book & User list should be available from client Currently this option is only available when using the Connection Suite WebMail client. In future releases it can also be configured for use with external clients supporting IMAP4. Hostname Page 10 of 11

11 SMTP port, normally 25 IMAP4 port, normally 143 LDAP port SMTP Relay: Hostname SMTP port, normally 25 SMTP forward port, normally 26 SMTP Forward host Optional: LDAP port LDAP Server The configuration of the LDAP Server is quite straightforward, see picture: For external clients, make sure that port number is set up according to value in Connection Suite, and that IP address is the address to the computer running the LDAP server. For configuration of an external client, please refer to its User Manual. WebMail is automatically configured to use the LDAP server. Page 11 of 11