ALERT ATS MODULAR TELEMETRY SYSTEM LAUNCH PACK

Transcription

1 ALERT ATS MODULAR TELEMETRY SYSTEM LAUNCH PACK

2 THIS LAUNCH PACK CONTAINS THE FOLLOWING MATERIALS: Launch Letter Product Brochure Technical Datasheet Bid Specification Questions & Answers Features & Benefits Price List Example Advertising ALERT ATS Alert ATS launch pack is available in the following languages

3 ALERT ATS MODULAR TELEMETRY SYSTEM Dear Colleague, Scott Safety is excited to announce the launch and availability of the new Alert ATS modular telemetry system. The Alert ATS modular telemetry system provides a suite of products, which can be easily integrated into a full entry control package. What modules make up the Alert ATS system? TECB - Entry Control Board DPG - Digital Pressure Gauge TRU - Telemetry Radio Unit PDU - Personal Display Unit Scott Command - Computer Monitoring System Should you have any questions concerning this launch please do not hesitate to contact your Sales Territory Manager or Customer Service cont act. Yours Sincerely, Tony Pickett Product Manager, Air Supplied Pimbo Road Skelmersdale, Lancashire WN8 9RA United Kingdom T:+44 (0) F:+44 (0) [email protected] SCOTTSAFETY.COM Company No VAT Registration No. GB Registered at Pimbo Road, West Pimbo, Skelmersdale, Lancashire, WN8 9RA, England

4

5 ALERT ATS MODULAR TELEMETRY SYSTEM

6 ALERT ATS TELEMETRY SYSTEM Product Highlights Simple to use system Clear status information panel Simple Evacuation Control Procedure Fast boot up times Flexibility to add modules later Writable Panel for personnel identification and fast turnaround Scott Safety are renowned for developing products to meet the existing and future requirements of the fire market. In the development phase of the new modular telemetry system the following factors were crucial: entry control procedures, simplicity of use, clear status information and evacuation control incorporating the latest advances in technology. TECB Telemetry Entry Control Board The new robust, durable tally board (TECB) delivers critical levels of accountability, as pressure, time remaining and time elapsed data are transmitted in real time. Warnings are displayed visually and audibly allowing rescue action to be undertaken as necessary while withdrawal signalling allows selective, individual or complete board evacuation at the press of a button. Standard Display Status information is presented on one screen with no need for scrolling, ensuring an instant, accurate snapshot of personnel. TECB features a full colour screen, with traffic light status information to easily identity personnel who are reaching low air levels. Half Way Point TECB contains a battery power source enabling one battery to be removed and charged without turning off the system, maintaining constant power in lengthy events. SCOTT COMMAND Computer Monitoring System Low Pressure This innovative computer monitoring software can be used in place of the TECB but still retains all of the features and benefits that the electronic board offers with the ability to increase the number of active users considerably. 2

7 DPG Digital Pressure Gauge The new digital pressure gauge enables an immediate understanding of air supply levels, time to whistle and temperature data, offering users reassurance to continue working regardless of the surrounding risk. The permanently back lit screen provides a clear and easily readable display containing all the required information to eliminate the need to scroll, while visual warnings alert the user and nearby colleagues. The one button operation unit logs all data for download as required. DPG features a full colour screen, with traffic light status information to easily identify current pressure, time to whistle and temperature. Rechargeable Li-ion battery Permanently backlit One button operation for self check Atex approved Simple Status Screens PRODUCT IN USE PRODUCT IN USE PRODUCT IN USE Standard Display Half Way Point Low Pressure TRU Telemetry Radio Unit The second module to the new telemetry system is the Telemetry Radio Unit The TRU enables pressure monitoring via an infra-red link from the DPG. The ATEX approved unit, which operates on a frequency 869.5Hz, has both multi- sound alarm and motion alarms. Coupled with LED indicators the unit offers automatic man down activation and manual activation as circumstances demand. PDU Personal Display Unit The small portable incident control unit eliminates the need for a tally board or PC. The system operates on the same frequencies as the TRU and incorporates evacuate all button; text message receiver and vibration alarm with LED indicator. 3

8 Alert ATS is a true modular telemetry system, giving users the ability to build from a simple setup to a full entry control system as demand requires. ALERT ATS Advanced Modular Telemetry System Digital Pressure Gauge Distress Unit + Digital Pressure Gauge Telemetry Radio Unit + Personal Display Unit Telemetry Radio Unit + Digital Pressure Gauge + Personal Display Unit Telemetry Radio Unit + Digital Pressure Gauge + Telemetry Entry Control Board Telemetry Radio Unit + Digital Pressure Gauge + Scott Command Telemetry Radio Unit + Digital Pressure Gauge + Scott Command + Telemetry Entry Control Board Scott Safety is a global business unit of Tyco International that supplies a variety of industries through manufacturing facilities located in the United States, United Kingdom, Asia, Finland and Australia. Pimbo Road Skelmersdale Lancashire England WN8 9RA Telephone: +44 (0) Fax: +44 (0) [email protected] 2011 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.

9 DPG DIGITAL PRESSURE GAUGE The Digital Pressure Gauge (DPG) enables an immediate understanding of air supply levels, time to whistle and temperature data, offering users reassurance to continue working regardless of the surrounding risk. The permanently back lit screen provides a clear and easily readable display containing all the required information to eliminate the need to scroll, while visual warnings alert the user and nearby colleagues. The one button operation unit logs all data for download as required. PRODUCT HIGHLIGHTS DPG features a full colour screen, with traffic light status information to easily identify current pressure, time to whistle and temperature. Rechargeable Li-ion battery Permanently backlit One button operation for self check Atex approved

10 DPG DIGITAL PRESSURE GAUGE SIMPLE STATUS SCREENS PRODUCT IN USE PRODUCT IN USE Standard Display Half Way Point Low Pressure PRODUCT IN USE MODULAR PLATFORM Scott Safety are renowned for developing products to meet the existing and future requirements of the fire market. In the development phase of the new modular telemetry system the following factors were crucial: entry control procedures, simplicity of use, clear status information and evacuation control incorporating the latest advances in technology. DPG is part of the Modular Alert ATS Platform which allows the user to configure their telemetry system according to their needs with the ability to upgrade and extend in the future. Alert ATS platform includes: Telemetry Radio Unit Digital Pressure Gauge Personal Display Unit Telemetry Entry Control Board Scott Command Scott Safety is a global business unit of Tyco International that supplies a variety of industries through manufacturing facilities located in the United States, United Kingdom, Asia, Finland and Australia. Pimbo Road Skelmersdale Lancashire England WN8 9RA Telephone: +44 (0) Fax: +44 (0) [email protected] 2011 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, Epic Voice Amp are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.

11 TECHNICAL PRODUCT INFORMATION ALERT ATS - ADVANCED TELEMETRY SYSTEM DESCRIPTION The Scott ATS system is a suite of products that can be used individually or in combination to provide a telemetry, display and datalogging system for use with Scott s range of self contained breathing apparatus. The detachable telemetry man down alarm (TRU) can also be used independently to a BA set or with a BA set not of Scott s manufacture. The system includes a digital pressure gauge, a standalone telemetry capable ADSU/PASS and 3 types of Entry Control Unit that can be used outside the incident to monitor the Telemetry ADSU s (TRU) inside to provide man down alarm and notification. These 3 systems offer different options to the user depending upon how they manage their entry control procedures and include the PDU, a tally board system (TECB) and the computer based Scott Command System APPLICATIONS The Alert ATS system will provide additional information to the professional fire-fighter and also has the capability to send this information outside to an incident/entry control officer. The ATS system is designed to be used during any incidents when the fire-fighter needs to wear breathing apparatus and modules of it can also be used when breathing apparatus is not being worn. APPROVAL INFORMATION CE marked in accordance with EN137:2006 Type II AS1716 ATEX approved

12 TECHNICAL DATASHEET MATERIALS DIGITAL PRESSURE GAUGE - DPG DPG Case Screen Battery Pressure sensor Button O-rings U-clips Screws HP Air Hose TRU Pass/DSU case Sounder Battery Buttons Screws Gasket Pass Cradle Motion detector MICRO-REPEATER Micro-repeater case Sounder Battery Buttons Screws Gasket PDU Supercell case Sounder Battery Screws Screen Polycarbonate TFT Lithium Ion Stainless steel Silicone Silicone, Nitrile Stainless steel Stainless steel PTCFE liner, stainless steel braiding, Estane sleeve Polycarbonate Piezo electric Lithium Ion TPE Stainless Silicone/Neoprene Stainless steel Accelerometer Polycarbonate Piezo electric Lithium Ion TPE Stainless Silicone/Neoprene Polycarbonate Piezo electric Lithium Ion Stainless LCD

13 TECHNICAL DATASHEET MATERIALS TALLY BOARD Screens Case Gasket Corner Guard Indicators Sounder Batteries Tally s SCOTT COMMAND PC BASED Operating system TFT ABS Silicone TPE LED s Piezo electric Lithium Ion Acrylic Windows MAINTENANCE/SERVICING/CLEANING INFORMATION Cleaning should only be carried out following the instructions as laid down in the user instructions. Maintenance and servicing must only be performed by trained personnel following the procedures laid down in the Service and Maintenance manual. TECHNICAL SPECIFICATIONS SOUNDERS DPG Alarm 90 Leq DBa ADSU/PASS Piezo electric Pre alarm Full alarm Leq DBa Leq DBa Tally Board Alarm 90 Leq DBa HOSES Stainless steel swivel hose fittings High pressure hose Maximum working pressure 450 bar Minimum burst pressure 800 bar BATTERIES Rechargeable Lithium Ion batteries

14 TECHNICAL DATASHEET ATS PERSONAL DISPLAY UNIT DESCRIPTION The Scott Safety PDU is a monitoring unit that provides a simple and low cost telemetry monitoring system. When activated the PDU will monitor for any alarms from Scott Safety TRUs and indicate to the Entry Control Officer when one or more has been activated. The unit is equipped with audible, visual and tactile alarms. The PDU can also be used to send a mass evacuation signal to any TRU or other PDU within range by a simple press of a button located on the top of the unit. The PDU can also be used in conjunction with the Scott Safety TECB and Command software providing different people around the fire ground with information without interfering with each other. When used in conjunction with the Command software the unit can also receive pre-programmed text messages if required. The PDU also has motion sensing circuitry which can be enabled by the user if required and will signal other PDUs and the Command system if the man down alarm is activated. MATERIALS Supercell case Sounder Battery Screws Screen Polycarbonate Piezo electric Lithium Ion Stainless LCD TECHNICAL SPECIFICATION Height: 10.2cm / Width: 6cm / Depth: 4cm Weight: 160g/ 5.6oz (approximate) Battery: Rechargeable Lithium, providing over 80 hours of use

15 TECHNICAL DATASHEET ATS DISTRESS SIGNAL UNIT DESCRIPTION The Scott Safety ATS ADSU is an Atex approved man down alarm. Small and compact, it can be attached to the wearers breathing apparatus or workwear and provides a loud audible and bright visual alarm should the unit no longer sense any movement. The unit is activated by the wearer detaching a tally key from the front of the unit and the unit can not be turned off until this key is put back in place. If no motion is detected for 15 seconds, the unit will go into Pre-Alarm mode and give an audible Pre-Alert signal. In Pre-Alarm, the green LED display is replaced by intermittent pulsing of four red L.E.D.s accompanied by a sweeping Pre- Alarm audio signal which becomes progressively louder. The longer the unit is in Pre Alarm, the louder the Pre Alarm signal becomes, signifying the unit is closer to the full Alarm mode. After lack of motion lasting approximately 30 to 35 seconds, The unit will go into Full Alarm mode. When in Full Alarm, the four red LEDs pulse rapidly and the audible alarm increases in volume and varies in pitch. The unit can also manually be put into full alarm mode by pressing the button on the front of the unit should the user decide they need to activate the unit themselves in an emergency situation. The full alarm can be reset by pressing the two side buttons however a configuration is available that requires the tally key to be connected back on to the unit to allow alarm cancellation. The unit also features an alarm that is activated on extended exposure to heat. APPLICATIONS The ATS ADSU is designed to give a warning via a loud audible alarm and flashing visual alarm if a user should stop moving for a period of time.

16 TECHNICAL DATASHEET MATERIALS Pass/DSU case Sounder Battery Buttons Screws Gasket Mounting Cradle (optional) Motion detector Polycarbonate Piezo electric 9V Dry Cell TPE Stainless Silicone/Neoprene Stainless steel Solid state accelerometer TECHNICAL SPECIFICATION Sounders Brass Piezo electric sounders Pre alarm Leq DBa Full alarm Leq DBa Heat Sensor alarm activation 176 o C (350 o F) 6 minutes 149 o C (300 o F) 8 minutes 121 o C (250 o F) 10 minutes 93 o C (200 o F) 12 minutes Dimensions 51mm x 80mm x 38mm (WxHxD) Weight 210g Battery life 70 hours in sensing mode 2-4 hours in alarm mode Low battery alarm 20% capacity giving miniumum of 1 hour in alarm mode. Battery 9 v duracell MN1604 recommended Atex Approval ExII1G EEx ia IIC T4

17 TECHNICAL DATASHEET ATS TELEMETRY RADIO UNIT DESCRIPTION The Scott Safety ATS TRU is an Atex approved ADSU/man down alarm fitted wit a Radio Telemetry Module. Small and compact, it can be attached to the wearers breathing apparatus or workwear and provides a loud audible and bright visual alarm should the unit no longer sense any movement. The unit is activated by the wearer detaching a tally key from the front of the unit and the unit can not be turned off until this key is put back in place.x The unit will accept an infra-red input from the Scott Safety DPG and can transmit pressure information as well as status alarms to an external monitoring device such as the Scott Safety TECB or PDU. If no motion is detected for 15 seconds, the unit will go into Pre-Alarm mode and give an audible Pre-Alert signal. In Pre-Alarm, the green LED display is replaced by intermittent pulsing of four red L.E.D.s accompanied by a sweeping Pre- Alarm audio signal which becomes progressively louder. The longer the unit is in Pre Alarm, the louder the Pre Alarm signal becomes, signifying the unit is closer to the full Alarm mode. After lack of motion lasting approximately 30 to 35 seconds, The unit will go into Full Alarm mode. When in Full Alarm, the four red LEDs pulse rapidly and the audible alarm increases in volume and varies in pitch. The unit can also manually be put into full alarm mode by pressing the button on the front of the unit should the user decide they need to activate the unit themselves in an emergency situation. The full alarm can be reset by pressing the two side buttons however a configuration is available that requires the tally key to be connected back on to the unit to allow alarm cancellation. The unit is capable of receiving an Evacuation alarm from the Scott Safety TECB or PDU and will indicate this to the user via its sounder & LEDs. The user can acknowledge the signal with the units side buttons. The unit also features an alarm that is activated on extended exposure to heat. APPLICATIONS The ATS ADSU is designed to give a warning via a loud audible alarm and flashing visual alarm if a user should stop moving for a period of time.

18 TECHNICAL DATASHEET MATERIALS Pass/DSU case Sounder Battery Buttons Screws Gasket Mounting Cradle (optional) Motion detector Polycarbonate Piezo electric Lithium Ion TPE Stainless Silicone/Neoprene Stainless steel Solid state accelerometer TECHNICAL SPECIFICATION Sounders Brass Piezo electric sounders Pre alarm Leq DBa Full alarm Leq DBa Heat Sensor alarm activation 176 o C (350 o F) 6 minutes 149 o C (300 o F) 8 minutes 121 o C (250 o F) 10 minutes 93 o C (200 o F) 12 minutes Dimensions 51mm x 80mm x 38mm (WxHxD) Weight 210g Battery life 70 hours in sensing mode 2-4 hours in alarm mode Low battery alarm 20% capacity giving miniumum of 1 hour in alarm mode. Battery Lithium Ion Atex Approval ExII1G EEx ia IIC T4

19 TECHNICAL DATASHEET DPG - DIGITAL PRESSURE GAUGE DESCRIPTION The DPG unit incorporates an electronic gauge and whistle. It switches on automatically as soon as it senses pressure in the pneumatic system of the BA set. A colour TFT display will shows the pressure, time to whistle and a temperature indication. These are all shown on the screen at the same time so the information is visible to the wearer at all times without them having to scroll through to find the data they want. The display is permanently backlit without the need to press a button. The unit datalogs information which can be downloaded via a port on the back of the unit to a computer using a software utility for after the event analysis The user can also activate the pre-use check function which electronically checks for leaks from the set and allows the electronic whistle to be checked. The result, pass or fail, of this test is datalogged for future reference The unit can be configured to the user s requirements using the service centre software. The unit can be supplied with an output for giving data to a telemetry enabled Pass unit for transmission to the Entry Control Office and/or an output to drive a head up display module.

20 TECHNICAL DATASHEET APPROVALS CE marked in accordance with EN137:2006 Type II AS1716 ATEX approved Eex iaiic T4 MATERIALS DPG Case Overboot Screen Battery Pressure sensor Button O-rings U-clips Screws HP Air Hose Polycarbonate Rubber TFT Lithium Ion Stainless steel TPE Silicone, Nitrile Stainless steel Stainless steel PTCFE liner, stainless steel braiding, Estane sleeve TECHNICAL SPECIFICATIONS Sounders DPG Alarm 90 Leq DBa Hoses Stainless steel swivel hose fittings High pressure hose Maximum working pressure 450 bar Minimum burst pressure 800 bar Batteries Rechargeable Lithium Ion batteries

21 TECHNICAL DATASHEET ATS TELEMETRY ENTRY CONTROL BOARD DESCRIPTION The Scott Safety Telemetry Entry Control Board (TECB) is a electronic entry control systems based around the design of a traditional style tally board. It will monitor up to 12 BA sets equipped with Scott Safety TRUs and if these are connected to Digital pressure gauges will also should the user s cylinder air pressure in real time. The TECB uses bright coloured TFT screens which display all information on one screen without having to scroll through to find out the information required. This information is also colour coded for at a glance recognition The board has the capability to receive voluntary withdrawal, Panic and man down alarms and distinguish between them, displaying a different warning symbol for each one giving the entry control officer enhanced situational awareness should one of his wards have an issue. Upon alarm the TECB provides both an audible warning and a visual indication against the user that has gone into alarm allowing a quick and direct response to come from the Entry Control Officer (ECO) The TECB also allows the ECO to evacuate his personnel either en mass or selectively and also to check if they have responded to his evacuation command through a simple and instinctive system of red, amber and green LEDs. The TECB is fitted with two independently removable batteries, each with their own indicator gauge, this ensures that the batteries can be hot swapped as required ensuring that the tally board can be run indefinitely independently from the mains. The batteries can be charged either on or off the board providing the user with unparalleled flexibility. The TECB data logs incident events which can be downloaded when required via the units inbuilt USB connection. The TECB can store up to 5900 events.

22 TECHNICAL DATASHEET MATERIALS Screens Case Gasket Corner Guard Indicators Sounder Batteries Tally s TFT ABS Silicone TPE LED s Piezo electric Lithium Ion Acrylic TECHNICAL SPECIFICATION Alarm Brass Piezo electric sounder Full alarm 90db Low battery alarm 20% capacity giving miniumum of 1 hour in alarm mode. Battery Twin removal Lithium Ion battery packs Dimensions Length: 850 mm Width: 515 mm Depth: 100 mm Weight: 14.5 kg

23 BID SPECIFICATION ALERT ATS - ADVANCED TELEMETRY SYSTEM General Requirements One (or more) electronic monitoring, recording and display device for use with Scott s range of Self contained breathing apparatus consisting of the following subassemblies 1. DPG Unit 2. Telemetry Distress signal unit/pass Unit 3. Micro-repeater 4. Various Options of Base Station The equipment (excluding base stations) must be intrinsically safe and approved to ATEX 1. Digital Pressure Gauge The unit should incorporate an electronic gauge and whistle. It should switch on automatically as soon as it senses pressure in the pneumatic system of the BA set. The unit should have the capability to perform a self check. This self check should be activated by choice of the user. A colour TFT display will show the pressure, time to whistle and temperature. These will all be shown on the screen at the same time so the information is visible to the wearer at all times without them having to scroll through to find the data they want. The display is permanently backlit without the press of a button. The unit will datalog information which can be downloaded via a port on the back of the unit to a computer using a user software utility for after the event analysis. The unit can be configured to the user s requirements using the service centre software. The unit can be supplied with an output for giving data to a telemetry enabled DSU/Pass unit for transmission to the Entry Control Officer and/or an output to drive a head up display module. 2. Distress Signal Unit/ PASS Unit The Telemetry DSU/pass unit should be activated by removing a tally key. It shall have sounders and LEDS and utilise a movement sensor. The unit shall use a rechargeable Lithium Ion battery. Upon pre-alarm the unit shall be able to be cancelled by pressing a button on the unit as well as the user s movement. The unit shall be a standalone unit with can be attached to or detached from the SCBA set so it can be used on the outside of a gas tight suit or when the SCBA set is not being worn. It shall be fitted with an internal radio which transmits the status of the unit to a remote monitoring device and also is able to receive information from this device. It should also be able to accept pressure information via an irda link from the DPG so that this information can be transmitted back to the remote monitoring device.

24 BID SPECIFICATION 3. Micro Repeater The micro repeater should be the same size as the PASS/ADSU so it is small and compact and easily carried by the fire-fighter. It should be easily activated by the removal of a tally key so it can be easily deployed when the user decides it should be. The unit should be fitted with a loud sounder and LEDs as the PASS is so that after the incident it can be evacuated and will sound and flash so that it can be easily located reducing the risk that it is lost. It should act as a repeater extending the range that the wearer can travel from the remote monitoring units and still remain in radio contact. 4. Remote Monitoring Unit Option 1) The unit should be able to be clipped to the ECOs jacket, it should have an LCD screen and should alarm when it receives a signal from a PASS unit what has been activated. This alarm should be audible, visual and tactile. It should display the identity of the Pass unit on the LCD screen. The ECO should be able to send an evacuation signal to all PASS s active on the fire ground by the press of one button. Option 2) The unit should be an electronic tally board with slots for 12 users. The ECO should have space to write information onto the board if they desire. The board will have a colour screen for each user, an extra colour screen to indicate alarms from users who are not logged onto the board and another independently powered screen which displays a real time clock and the unit s battery status. The unit should be fitted with a sounder that activates when an alarm is received to alert the ECOs attention to it, the colour screen will also display an alarm symbol and flash the LED's of the user acknowledgement button so that the ECO can immediately see which of his wearers are in alarm status. The individual wearer screens should be colour and show the users cylinder pressure, time to whistle, time of whistle elapsed time and alarm status. They should also show whether the user is in range or not. This information should be visible on one screen and the ECO should not have to scroll through or press any buttons to view the information. The Screens should be permanently backlit to ensure high visibility even during night time operations. There should be a single button that enables the ECO to evacuate the whole board and individual buttons that allow the ECO to selectively evacuate wearers. These buttons will have indications of whether the electronics have acknowledged the ECOs evacuation signal and then whether the user has acknowledged the evacuation signal. This should be displayed by colour LEDs following a simple instinctive pattern. The unit shall be powered by two independent rechargeable batteries which allow the unit to operate for an indefinite length of time, it shall also be possible to run the unit from an external power supply as well. The ECO should be provided with separate battery indicators for both of these rechargeable batteries. The unit should provide a data logging function so that incident data can be downloaded after the event if required. Option 3) The command system should be a software based control system that can operate on a windows based PC. It should have an external receiving device that can be connected to the PC via a USB port. The system shall be capable of monitoring 50 pass units and displaying pressure information, time to whistle, time of whistle (if used in conjunction with DPG) and elapsed time. It should inform the ECO if any of the pass units go into alarm automatically or are manually activated by the user. The system should be able to distinguish between these types of alarm activation. The ECO should be able to use the board to evacuate each user selectively or all users logged on at the press of a button. The software will inform the ECO when the electronics have received the signals and then when the users have acknowledged the signals. The command unit should also be able to monitor the simple entry control systems (described in Option 1) and also send them messages by text if required. The unit should provide a data logging function so that incident data can be downloaded to a computer for after the event analysis if required. Base station should be able to be used independently or in conjunction with the users existing tally boards.

25 S & S ALERT ATS - ADVANCED TELEMETRY SYSTEM What is the Alert ATS system? The Alert ATS is a modular electronic monitoring system, that logs and displays various parameters and give alarms to the wearer. With the radio telemetry functionally this information can also be transmitted outside to an entry control officer to enable them to have a situational awareness of their fire-fighters condition. The system consists of a digital pressure gauge and a Telemetry Distress Signal unit that can be used independently or in conjunction with each other to give an extra range of features. What does ATS stand for? ATS stands for Advanced Telemetry System. What is Telemetry? Telemetry is the technology of automatic measurement and transmission of data by (in this case) radio from remote sources. Does the radio in the ATS carry voice transmissions as well? No the radio only carries the telemetry data for the ATS system, it does not replace the fire fighters existing radios Can the ATS be used with or retro-fitted to any Scott Breathing Apparatus? The ATS s Digital Pressure Gauge (DPG) can replace the standard Pressure Gauge and hose assembly used by Scott Breathing Apparatus including; Propak, Contour, Centurion, Cenpaq and ACS, although it is envisaged that it will be used in conjunction with Propak or ACS by most users. The PASS unit can be used as a standalone unit on any Scott Breathing Apparatus. If the PASS unit is purchased as a standalone unit can it be used on other manufacturers Breathing Apparatus? Yes, although the PASS unit would only function as a telemetry system for the motion detecting alarms, it would not be able to take a pressure reading from these sets. If the PASS unit is purchased as a standalone unit can it be used on other types of Respiratory Protective Equipment (RPE)? Yes, although the PASS unit would only function as a telemetry system for the motion detecting and evacuation alarms. It could be used in conjunction with a PAPR system during a CBRN incident or a negative pressure mask during damping down operations. Can the ATS system be purchased with or without Telemetry? Yes, the user can purchase the modules separately allowing them to build up the system gradually if they require and to tailor the feature set to their needs.

26 S & S If I purchase the ATS system without telemetry can I upgrade my system at a later date? Yes, the telemetry module is built into the TRU and is added when this module is added into the system. The TRU can be added at any time Is the Digital Pressure Gauge (DPG) unit easy to read in low light conditions? Yes the TFT colour screen is permanently backlit so is clearly visible in the dark without the user having to press any buttons. What radio frequency does the Telemetry operate on? The telemetry will operate on different frequencies depending upon the area that the unit will be used in, for example the current UK frequency and European frequency is in the band. We also have other frequencies assigned for Australia and New Zealand. How long do the batteries last? The batteries are rechargeable lithium ion batteries, battery life will depend on individual usage. However the TRU battery will typically give 80 hours of sensing and 4-6 hours of alarm. How many users can log into the base station and be monitored? With the optional tally board; slots for 12 active users can be managed. Options are available to manage in excess of 50 units from the base station using the Scott Command PC based system. Is the ATS system Intrinsically Safe? The Digital Pressure Gauge (DPG) and the TRU unit have the latest ATEX approvals and so are classified as intrinsically safe. How loud is the alarm on the DSU/TRU unit? The alarm is between 102 and 112 decibels in volume. Is the system flame/fire proof? Compenents which attach to the BA set have undergone and passed the same flame testing as the breathing apparatus set and are approved to EN137:2006 Type 2. This flame test is a total engulfment at 1000 oc s for 10 seconds. Is the system serviceable by the user? Any servicing of the electronic elements of the system requires the unit to be returned to the manufacturer for servicing. This is to ensure that the ATEX approval is maintained. What is the range of the TRU unit? The range of the unit in free air is up to 1 mile. This range can be decreased if the users are working in buildings containing lots of steel or reinforced concrete. Do the individual PASS units act as repeaters? Each PASS can act as repeater unit upon activation of the evacuation alarm. This may enable a PASS unit that is out of range of the EC System to receive the evacuation alarm from another PASS unit rather than the EC system. This obviously increases the safety of the wearer should the building need to be evacuated

27 S & S Are separate repeaters available? Yes, micro repeaters can be supplied that can be deployed by the fire-fighters should they feel that they may go out of range of the Entry Control point Are there any measures to stop the repeaters getting lost? Yes, micro repeaters can be evacuated by the ECO after the incident. Upon receiving the evacuation signal their inbuilt LEDs and sounder will activate allowing the users to track them down easily. How many events can the TECB record? The TECB stores event data in an event log and this will store up to 5900 events. The DPG has a similar storage capacity and stores 2500 events consisting of each command, plus internal parameters recorded once every minute. The data is stored as an endless log with the newest overwriting the oldest once the event log is full. For how long can the Tally Board operate on batteries? Because of the tally board s unique design using two independently changeable rechargeable batteries the tally board can be kept running indefinitely.

28

29 FEATURES & BENEFITS ALERT ATS - ADVANCED TELEMETRY SYSTEM FEATURE Modular System 3 Different Entry Control Systems Simple and intuitive to operate Intuitive display High contrast colour screen Simple, optional pre-use check Competitive datalogging All information provided on one screen Rechargeable battery Can be added to existing sets Components on BA Set ATEX approved Dual Battery system on TECB TECB Fast Start Up Evacuation Acknowledgements Display of non logged on user Different symbols for man down and panic alarms Full Board Evacuation Selective Evacuation Manual TECB functionality BENEFIT Allows users to buiold up system in line with their requirements and budget Allows users to select the product for their procedures Makes user training quick and efficient Makes user interpretation of data easy Easily visible in dark or smoke filled rooms Allows users to easily visualise product parameters Enables users to easily pre-use set Enables pre use check to be done at users convenience Alows after event analysis of incident if required User does not have to scroll through screens to find required information Reduces expense of purchasing & disposing of dry cell batteries Allows customers to easily upgrade their current fleet of sets. System is suitable for use in hazardous environments Batteries can be "hot swapped" allowing infinite running time of TECB Allows Incident Management to start immediately Allow Entry Control Officer to understand of all personell have received evacuation call Allows ECO to pick up personnel that may have missed the Entry Control Point Allows the Entry Control Office to accurately asses the situation Allows the Entro Control Officer to withdraw all personell from the incident with a single button press Allows the Entry Control Officer to withdraw personell from a specific area if required Allows Entry Control Officer to use board as a Standard Tallyboard should any issues arise with the electronics or batteries.

30 LET S KEEP OUR FIRST RESPONDERS SAFE ACCU RAT E. R E L I A B L E. T E C H N O LO GY. Th e S cott Safety A le rt ATS syste m is a t ru e mod u l a r te l e m e tr y syste m, g i v i n g Fir st Res ponders t h e abilit y to mon itor t he statu s o f th e i r ow n B re at h i n g Apparatus and En t ry Con t rol office rs to e f fe c ti ve l y m a n a g e th e i r E n t r y Con trol procedures. T O L E A R N M O R E V I S I T : S C OT T S A F E T Y.C O M / E M E A LET S WORK. Copyright 2011 Scott Safety. All Rights Reserved.

31 Alert ATS is a true modular telemetry system, giving users the ability to build from a simple setup to a full entry control system as demand requires. Scott Safety is a global business unit of Tyco International that supplies a variety of industries through manufacturing facilities located in the United States, United Kingdom, Asia, Finland and Australia. Pimbo Road Skelmersdale Lancashire England WN8 9RA Telephone: +44 (0) Fax: +44 (0) [email protected] 2011 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, Alert ATS are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.