Sapa Facades. Building systems for flexibility, function and aesthetics

Transcription

1 Sapa Facades Building systems for flexibility, function and aesthetics

2 2

3 Sapa Facades Contents Facades adorn the rooms of the city 5 Energy efficient solutions save, control and generate 6 Sapa Facades 1 Overview of Sapa Facades 1 Sapa Facade Sapa Facade 415 SX 14 Sapa Facade 415 EF and 415 EF SX. Unitized curtain wall. 16 Sapa Facade 415 SSG 2 Sapa Facade 55 SG 22 Sapa Solar Shading Sapa Solar BIPV 26 Sapa Glazed Elements 374, 374 SX and Decorative profiles, framework profiles, windows and doors 3 Exterior decorative profiles Expressive 32 Exterior decorative profiles Add 34 Exterior decorative profiles Optima 36 Interior framework profiles 38 Sapa Doors and Sapa Windows 4 Glass filling for facades 42 Surface treatment and colour 44 Where to find us 46 Architect Support 46 sapabuildingsystem.se More information about our products can be found on our website: sapabuildingsystem.se Detailed sections in.dwg and.dxf, specification texts, etc. are available for download. For more information find your local contact on our website. 3

4 Sapa Building System AB is the leading Nordic supplier of aluminium-based building systems. Our systems have been developed for the harsh Nordic climate, Nordic building standards and market demands. Our range includes facades, doors, windows, glazed roofs, solar shading and building integrated photovoltaic. Recycling of aluminium is an energy-lean process. Approximately 5% of Sapa s total production is based on recycled aluminium. 4

5 Sapa Facades Facades adorn the rooms of the city Multiple systems. A facade can portray different expressions by using our solutions to meet the various aesthetic and functional demands. We have systems for multiple solutions choose a system based on your project and your wishes. P-marking. Our building systems fulfil the demands for P-marking*, which includes quality assurance of design, manufacture and installation of windows, doors, wall and roof elements of glass and metal. Swedish tradition. Our building systems are developed for the Nordic climate, building standards and market demands, in close cooperation with architects and our manufacturers. 4 years of continuous improvement has resulted in flexible and rational solutions, systems with great potential for architectural expression and reliable function, for flexible assembly, rational manufacture and for minimum maintenance. Our product development is driven with a focus on manufacturability, simplicity, economy, function and design. Save, control and generate energy. Energy conservation is the basis of our range. Our systems make it easy to design modern houses that fulfil high demands. Easy to combine systems. We have a large range of windows, doors and sliding doors that can be simply and elegantly integrated in our facade systems. * A swedish product quality label sponsored SP (Technical Research institute of Sweden) 5

6 Energy-efficient solutions The Sapa building systems make it easy to design modern houses that fulfil high demands. We have considered every aspect and offer flexible systems where one can easily integrate solar shading and solar cells in a facade to achieve a total solution with good energy conservation. Save, control and generate energy. Our products are developed with a focus on energy conservation and can easily be combined in an aesthetic and functional way that gives you the potential to build modern and energy efficient. Save Control Generate Sapa Facade system SX SX is the designation of a system with high insulation properties, using amongst other things, specially designed isolators with multi-chamber systems. Sapa Solar Shading Limit sunlight and retain the view with our exterior solar shading for a better indoor climate. Sapa Solar BIPV Our system for utilising solar energy. The system is built up with photovoltaic cells that are integrated into our facade system. Amongst the new guidelines that will set the standards in both existing and new buildings, LEED, BREEAM and Green Building are important concepts for the future. Our systems are particularly suited to these new environmental classifications. The illustration shows an office building in Malmö, Sweden with Sapa Facade system 415. The building is certified according to Green Building. 6

7 Energy and project adaptation Our standard range can manage most situations. But some projects have specific demands and for these we offer a project solution. The cooperation between architects, our designers and manufacturers creates new custom built solutions that are based on our standard range. Custom built project solutions. Building for energy efficiency requires a comprehensive view of the facade. In this section we present project solutions and standard solutions with a focus on energy conservation. Working with project adaptation generates solutions outside our standard range, but at the same time forms the basis for our future product development. Gröna skrapan (the Green scraper) in Gothenburg, Sweden, is an EC marked GreenBuilding and is also certified according to LEED platinum. 7

8 Passive house standard Marienlyst children s school, Drammen, Norway. Architect: Div.A Arkitekter MNAL. The school was built according to the standard for passive buildings. Our standard systems for facades, windows, doors and glazed roofs are included in the project. Facade: Sapa 415 SX. Internal glazed elements: 35 E3. Doors: Sapa 25, 274, 25 E3, 274 EI 3. Windows: Sapa 174 SX. Glazed roof: Sapa 55. Natural ventilation VAT 83, multi-user building, Søborg, Copenhagen, Denmark. Architect: PLH Arkitekter a/s. Energy efficient offices with natural ventilation. Our standard systems for facades, windows, doors and glazed roofs are included in the project. Facades: Sapa 415. Windows: Sapa 174. Doors: Sapa 274. Glazed roof: Sapa 55. 8

9 Passive house standard Science and Innovation centre in Sarpsborg, Norway. Architect: AART architects A/S, Danmark. Our standard systems for facades, BIPV, doors and windows are included in the project. Facades: Sapa 415 SX with BIPV, Sapa 374. Sapa 35 interior. Doors: Sapa 25 and 274. Windows: Sapa 174 SX, inward opening. EC GreenBuilding LEED platinum Gröna skrapan (Green scraper), Gothenburg, Sweden. Architect: White arkitekter AB. Gröna skrapan (the Green scraper) in Gothenburg, Sweden, is an EC marked GreenBuilding and is also certified according to LEED platinum. Both standard systems and project-adapted solutions are included in the project. Facades: Sapa 415 SX and project-adapted solutions for the shell facade. 9

10 Facade system Overview table page 12 page 14 page 16 page 2 Sapa Facade system SX 415 EF/415 EF SX 415 SSG Technical building principle Partition between slabs Curtain wall Cold facade Double-shell facade Element building system partially partially partially Exterior glazed sections Interior glazed sections Decorative profile Add Expressive partially (not element pitch) Optima only vertically only vertically Mullion and transom profiles Rectangular width/depth 5/35-3 mm 5/35-3 mm 5-7/12- mm 5/35-3 mm I-profile width/depth 5/1- mm 5/1- mm 5/1- mm T-profile width/depth 5/ mm 5/ mm 5/ mm Glass choice/filling choice Single glass 4-1 mm Insulating glass mm mm mm Full filling Vakupanel (Vacuum panel) Performance Watertightness accord EN 12154/EN 1228 Class R7/Class 9A Class R7/ - Class RE 15/ - Class RE 12/ - Airtightness accord EN 12152/EN 1227 Class A4/Class 4 Class A4/ - Class AE 9/ - Class A4/ - Wind load resistance accord EN 13116/EN Design wind load 2 Pa (L/2, max 15 mm) Design wind load 2 Pa (L/2, max 15 mm) Design wind load 2 Pa (L/2, max 15 mm) Impact resistance accord EN 19 Class I5/E5 Class I5/E5 Class I5/E5 Burglar resistance accord EN 1627/SS Fire protection accord BBR 5:231 E3, EI15, EI3 Design wind load 2 Pa (L/2, max 15 mm) Weight individual glass area max 25 kg 5 kg 25 kg 25 kg Complement Window 174 inward/outward opening Inward opening Window 174 SX, inward opening Window 474 outward opening Door 274 Door 26 Door 25 Sliding door 25 Solar shading 455 Solar BIPV 1

11 page 22 page 28 page 28 page SG SX 35 Our homepage has a comprehensive project planning support in the form of product data and downloadable details. partially Drawings Elevations and details Profile breakdowns Drawing texts Functions and performance U-coefficient glazed facades U-coefficient filling Dimensioning Glass Openable units Facade complements We have even collected together inspiration, advice and tips for the creative phase. 5/6-18 mm / mm 52-89/74-16 mm 52-25/5 mm 5/ mm 5/135 mm 6-11 mm 5-13 mm 3-2 mm 26-41, mm 2-54 mm 2-54 mm 2-33 mm 2-54 mm 2-54 mm 2-33 mm - /Class E75 - /Class 9A - /Class 9A - /Class 4 - /Class 4 - /Class 4 Class 3, (L/2, max 15 mm) Class 3, (L/2, max 15 mm) Class 3, (L/2, max 15 mm) S1, S2 MK2 E3, EI15, EI3, EI6 E3 15 kg 17 kg 17 kg U-value The U-coefficient for all facade systems (heat transfer) is calculated according to EN The U-coefficient for the whole facade should be given, U cw Our homepage has tables showing the total U-coefficient for different types of glass and spacing strips. The calculations are based on the calculation standard for Curtain Wall EN 13947:26. Sound reduction Sound reduction is measured according to EN ISO The sound insulation in a building is described with a sound reduction figure and is given in db. Sound class or Rw or Rw+Ctr is usually given. Rw is an average value based on the experience of sound.rw+ctr takes the spectrum for town traffic into consideration. Quality assurance P-marking. Our building systems fulfil the demands for P-marking, which includes quality assurance of design, manufacture and installation of windows, doors, wall and roof elements of glass and metal. CE-marking. Our licensed manufacturers are responsible for manufacture, assembly and that the completed product fulfils the performance that is declared by the CE marking. More detailed information about P-marking and CE marking can be found on our website. 11

12 Facade system Sapa Facade is a very flexible insulated facade system with two-stage sealing. The system offers a large degree of choice with its wide range of exterior decorative profiles and interior mullions/transoms. Sapa 415 is easy to install and offers great freedom of design and various functions. The facade can be designed as a facade performed as a self-supporting curtain wall, facade performed as partition between slabs, cold facade or double-skin facade. The rebate is suitable for double or triple glazing units with thickness up to 48 mm. The system is single pane ventilated/ drained, i.e. each glass pane or filling pane is ventilated and drained separately which reduces the risk of condensation damage, leakage and cooling of the mullions. In addition, the system is produced with two-step sealing where the external sealing strip functions as a raincoat and the internal sealing strip constitutes the main seal (air/water). The system is flexible and can easily be integrated with our door systems, window systems, solar shading and solar cells. There is even a wide range of interior mullions/transoms and exterior decorative profiles for greater freedom of design. Facade system 415 with decorative profile 42227, powder coated RAL 735 light grey. 12

13 415, insulated profiles for double or triple glazing units 415 is available in variants for fire protection classes E 3, EI 15 and EI 3. The same profile can be used both vertically and horizontally, which allows optimum material usage. Easy installation simplifies the building process. Glazing is always done from the outside of the construction Fasad with rectangular med rektangulär profilform mullion/transom 415 Fasad with 415 med delningsprofil split mullion Fasad with T-shaped med T-formad profil mullion/transom 415 Fasad with 415 I-shaped med I-formad profil mullion?? Kristianstad Arena with Sapa Facade

14 Facade system Sapa Facade 415 SX The SX thermal break in 415 SX is specially designed with a multichamber system that provides high insulating characteristics. The system provides the right conditions for energy efficient solutions for your project. Sapa 415 SX is easy to install and offers great freedom of design and various functions. The facade can be designed as a facade performed as self-supporting curtain wall, facade performed as partition between slabs, or double-skin facade. The rebate is suitable for triple glazing units with thickness up to 56 mm. The system is single pane ventilated/ drained, i.e. each glass pane or filling pane is vented and drained separately which reduces the risk of condensation damage, leakage and cooling of the mullions. In addition, the system is produced with two-step sealing where the external sealing strip functions as a raincoat and the internal sealing strip constitutes the main seal (air/water). The system is flexible and can easily be integrated with our door systems, window systems, solar shading and solar cells. There is even a wide range of interior mullions/ transoms and exterior decorative profiles for greater freedom of design. 14 Facade system 415 SX with decorative profile Expressive vertical, horizontal, anodised with stainless look.

15 The same profile and can be used both vertically and horizontally, which gives better material usage. Easy installation simplifies the building process. Glazing is always done from the outside of the construction. 415 SX, highly insulated profiles 3 A thermal analysis photo displays the high degree of heat insulation Fasad Facade SX SX med rektangulär profilform with rectangular mullion/transom 5 Facade Fasad 415 SX SX med delningsprofil with split mullion 5 Facade Fasad SX SX med T-formad profil with T-shaped mullion/transom 5 Facade Fasad 415 SX SX med I-formad profil with I-shaped mullion? Sapa 415 SX at Science and Innovation centre in Sarpsborg, Norway. 15

16 Facade system Sapa Facade 415 EF and 415 EF SX Our new 415 EF, unitized curtain wall system, has been developed for prefabrication of facade elements. The advantage with element facades is better control during the manufacturing process and rational installation without scaffolding on large or complex building projects. The facade system makes it easy to integrate products such as opening units, filling and low-emission insulated glazing. The design is extremely well insulated and is available in versions with standard insulation 415 EF and extra insulation 415 EF SX. Both are compatible with facade systems 415 and 415 SX. The glazing strips are chamfered for water diversion. The solution is ideal for narrow complex building sites since no place for temporary storage of material is required, the elements can often be lifted directly from the transport truck for rational and flexible installation. Facade system 415 EF, anodised profiles. 16

17 Mullions/ Transoms with 12 or mm profile depth. The visible profile width is 7 mm at the element joint and 5 mm at the intermediate mullions/ transoms. A rebate for double or triple glazing units allows a glass thickness for 415 EF of mm and for 415 EF SX of mm. Traditional mineral wool filling or alternately VakuPanel (vacum panel) with a U-coefficient down to.17 W/m2K. Each glazed unit is drained and ventilated separately. There is a very efficient 3-stage rubber strip seal between the elements. This seal reduces the need for butyl sealing and therefore simplifies installation and assembly considerably. Straight cuts allow easier manufacture and easier glass replacement EF Horizontal element joint Vertical element joint 2 - Horizontal profile 4 - Vertical profile 415 EF SX Horizontal element joint Horizontal profile 3 - Vertical element joint 4 - Vertical profile 12 17

18 18

19 Building with prefabricated facade elements Sapa Facade 415 EF and 415 EF SX The facade is manufactured at the factory as ready to install elements. The elements are completed with glass and finishing outer layer on both outside and inside. The element is hung up on an installation bracket mounted on the edge of the floor. A 3-step rubber strip seals between the elements. Installation at the building site is fast and a completed facade emerges as the elements are mounted in place. The elements are lifted in place with a builder s crane or a mobile crane. No scaffolding is required since the installers stand on the floor. The facade element itself can be used as a protective barrier due to its construction. The solution is ideal in narrow and complex building sites since there is no need for intermittent storage of material. The elements are often lifted directly from the transport truck to the installers. 19

20 Facade system Sapa Facade 415 SSG Sapa 415 SSG (Structural System Glazing) gives the facade a flat surface since the system has no external glazing profiles and is sealed with joint sealant between the glass units. 415 SSG is built on 5 mm wide aluminium profiles and a double or triple glazing units with warm edge. The glass pane is mechanically anchored in the framework profile with mounting brackets. The glass and weather proofing become a watertight construction, so the system only requires ventilation. The internal sealing strip forms the air seal. The inner sealing strip and the construction of the thermal break optimise insulation in the profiles. 415 SSG is an entirely glass solution and can be installed as a facade performed as selfsupporting curtain wall, or double skin facade. The system even comprises openable units that can be easily integrated. Facade system 415 SSG, anodised profiles. 2

21 415 SSG for double or triple glazing units. Rebate for double or triple glazing units. For double glazing up to 36 mm (excl. outer glass), internal glass thickness 4-9 mm or mm. For triple glazing up to 52 mm (excl. outer glass). The same profile can be used both vertically and horizontally, which gives better material usage. Glazing is always done from the outside of the construction / / / /59 2 min 6 22 min 6 22 min 6 22 min Fasad 415 SSG med 415SSG rektangulär profilform with rectangular mullion/transom Fasad 415 SSG 415 med delningsprofil SSG with split mullion Fasad 415 SSG 415 med T-formad SSG profil with T-shaped mullion/transom Fasad 415 SSG 415 med I-formad SSG profil with I-shaped mullion?? Facade system 415 SSG at AGA factory on Lidingö, Stockholm. 21

22 Facade system Sapa Facade 55 SG 55 System Glazing is a classic solution but has an external glass holder that is only 32 mm wide. The smart glass holders provide optimal glass surface. The system is based on our glass roof system with advantages such as simple installation and good sealing. 55 SG consists of insulated 5 mm wide aluminium profiles. The external glass holder is only 32 mm wide but the interior framework profiles are 5 mm wide. The external glass holder is installed with countersunk screws that can even be concealed with a decorative profile. 55 SG should be constructed as a facade performed as self-supporting curtain wall or double-skin facade. The system has a rebate for double or triple glazing units. Standard sealed insulated glass is used for a cost-effective solution. Drainage and ventilation are provided via the mullion. The internal sealing strip forms the air seal. The interior profiles have a rectangular shape, various types of decorative profiles are available. The system can easily be complemented with opening units. Facade system 55 SG, powder coated RAL 743, anodised profiles. 22

23 Rebate for double or triple glazing units. The same decorative profile can be used both vertically and horizontally. Easy installation simplifies the building process. Glazing is always done from the outside of the construction. 55 SG, insulated profiles for double or triple glazing units /51/ /51/ /51/ /51/ /51/ /51/ /51/ /51/ /51/ ?? 5 mm mullion Split mullion 5 mm Transom 5 mm Södertörns University with Sapa Facade 55 SG, Stockholm. 23

24 Controlling energy Sapa Solar Shading 455 Function and form become one with the architecture. Our exterior solar shading reduces a building s cooling requirements. The system comprises three types of blind; Bow, Wing and Box, which gives you great freedom in the choice of form and function. The solar shading complements our 415/415 SX facade system in a simple and aesthetic way. We have solutions for visually unbroken solar shading and for clearly marked sectional divisions. By using our design profile program, the character of the carrier profile can be reinforced to coordinate with the architecture of the building. Our Add bracket system simplifies attachment of solar shading to the facade. Our solar shading is also available with motorised control via an external solution, for optimised control of sunlight and energy. 24

25 Control of solar radiation Implementation. Solar shading can be implemented as either horizontal or vertical blinds, and the latter also with lying or standing blinds. Installation. Self-supporting blinds or as a secondary construction on other supporting framework. Mounting bracket for installation at angles of, 15, 3 and 45 respectively. Blind profiles. Bow, Wing or Box with depths of 19 or 3 mm respectively. Sapa Solar Shading Aero 455 is our latest project solution. It consists of solar shading with built-in photo-voltaic solar cells. Box solar shading on Sapa Facade 415 at Farris Bad, Norway 25

26 Generate energy Sapa Solar BIPV Sapa Solar BIPV, Building Integrated Photovoltaic, opens the door for modern building technology. The large range of shapes, colours and optical structures that solar cells provide together with the glass and profiles gives you the possibility to create energy-effective, innovative and environmentally aware projects. Sapa Solar BIPV is our system for harnessing solar energy. The system consists of solar cells that are included in a double or triple glazed transparent insulated window, or alternately an opaque single glass in the breastwork or solar shading. The solar cell glass can easily be integrated in Sapa Glazed Roof 55 and Facade 415/415 SX, or in the solar shading. This is a complete system solution with associated electrical components Transparent insulated glass, safety glass Transparent insulated glass Opaque single glass Transparent single glass, safety glass

27 Examples of Sapa Facade 415 with BIPV in different variants Opaque facade glass. Monocrystalline. Transparent insulated glass. Multi-crystalline. Transparency dependant on distribution of cells. Opaque facade glass. Thin-film. Transparent insulated glass. Thin-film. The illustration shows a transparency of 2%. Sapa Solar BIPV includes cell technology based on monocrystalline, multi-crystalline or thin-film BIPV = Building Integrated Photovoltaic 27

28 Glazed sections Sapa Glazed Elements 374, 374 SX and 35 Exterior and interior glazed elements for light and sight. Glazed element 374 is available in several fire resistant classes. 374 Glazed elements consist of insulated, mm deep aluminium profiles. 374 SX Glazed sections consist of extra insulated, mm deep aluminium profiles. Glazing is performed from the inside with glazing beads. The outer and inner weather sealings has straight edges for optimum glass day light. The system is single pane ventilated/drained, which means that each pane/filling is ventilated/drained separately. In addition, the system is produced with two-step sealing where the external sealing strip functions as a raincoat and the internal sealing strip constitutes the main seal (air/water). Our variant for internal glazed elements is system 35, non-insulated, 5 mm deep aluminium profiles. Glazing is performed from the inside with glazing beads. Glazing element 374, powder coated 28

29 374 insulated profiles Framework profiles mm profile depth and mm profile width. Single glass: 5-13 mm. Double glazing and triple glazing: 2-54 mm. Full filling: external outer layer of sheet metal/ facade glass, internal outer layer of sheet metal/board material. Fire protection class E 3, EI 15, EI 3 and EI 6. The variant is available with design glazing beads for symmetrical positioning of the glass. Double glazing: thickness 2-3 mm. 374 SX insulated profiles Framework profiles mm profile depth and mm profile width. Double glazing and triple glazing: 2-54 mm. Full filling: external outer layer of sheet metal/facade glass, internal outer layer of sheet metal/board material. 35 non-insulated profiles for interior solutions Framework profiles 5-12 mm profile depth and mm profile width. Single glass: 3-2 mm. Double glazed: 2-33 mm. The variant is available with design glazing beads for symmetrical positioning of the glass. Single glass: 5-1 mm. Marienlyst children s school, Drammen, Norway. Interior glazed elements 374, fire resistance class E 3. 29

30 Complete facade systems Design and function Decorative profiles, mullions/ transoms, windows and doors 3

31 31

32 Decorative profile Expressive horizontal as an accent to both colour and shape. 32

33 Exterior decorative profiles for 415 and 415 SX Expressive Expressive gives you as the creator, greater freedom to allow light and shade play across the facade. Give the facade a direction, reinforce sections and elements, combine with colourisation and surface treatment. Expressive decorative profiles can also be combined with profiles from our decorative families Add and Optima. You can also produce your own profile design if you want to. Expressive decorative profile horizontal combined with vertical. Expressive decorative profile in combination horizontal and vertical. Expressive decorative profile horizontal combined with vertical. Expressive decorative profile horizontal combined with vertical. Expressive decorative profile Expressive decorative profile in combined with vertical. 33

34 34 Solar Shading Box installed with decorative profile Add creates a smart and simple installation on the facade.

35 Exterior decorative profiles for 415 and 425 SX Add Add is a flexible bracket system for attaching solar shading, lightning conductors, drain pipes, gutters, signboards, lighting, etc. Add profiles can also be used to advantage together with decorative profile family Expressive. The characteristic groove of this profile can be used to enhance the framing of each glass unit to achieve a picture frame effect. Add basic decorative profile Countersunk screws. Drain pipes and gutters are connected to Add with adapted brackets. Add basic decorative profile complemented with coloured profile to enhance the facades subdivision and direction. Lightning conductor cable connected to Add with a simple flexible connection. Add basic decorative profile with mitred connections in the horizontal and vertical profiles, Picture frame. Add connected to solar shading and solar screens using adapted brackets, see chapter Solar Shading. 35

36 36 Optima gives a narrow exterior profile width, here in combination with stepped glass in the corner.

37 Exterior decorative profiles for 55 SG Optima Optima offers different design possibilities with visible or concealed fixings. Black surface treatment is a common combination with covers that are only 32 mm wide. Optima decorative profiles can also be combined to advantage with Expressive. You can also produce your own profile design if you want to. Optima 42844/ Concealed attachment. Powder coated black. Optima horizontal combined with vertical, fixed with visible screws in stainless or black oxidized variant, c/c 2 mm. Optima 42844/42845, concealed attachment horizontally combined with Expressive vertical. Optima 42844/42845, vertical combined with Expressive horizontal. Optima horizontal and vertical, fixed with visible screws in stainless or black oxidized variant, c/c 2 mm. Optima 42844/42845 horizontal and vertical. Concealed attachment of the profile which is anodised in stainless look colour. 37

38 High, grey painted rectangular mullions create an exciting interior at Farris Bad, a Hotel centre and Spa in Larvik, Norway. 38

39 Sapa Facades Interior mullions and transoms Rectangular profiles, T or I shape. You can also combine the different shapes to achieve a desired expression. By choosing two different depths, the connection is often softer and more stylish. Rectangular mullions/transoms are available in several different depths. The example shows a combination of rectangular and T-shaped profiles. T-shaped mullions/transoms are available in several different depths. Why not combine different profile depths on mullions and transoms? T-profiles are available for 415, 415 SX and 415 SSG. I-shaped mullions are available in several different depths. Why not combine different profile depths or combine with a horizontal rectangular or T- shaped profile? I-profiles are available for 415, 415 SX and 415 SSG. Rectangular mullions/transoms are available in several different depths. Why not combine different profile depths on mullions and transoms? Rectangular shape is available for all systems. 39

40 Sapa Facades, opening units Doors and windows The opening units in a facade must fulfil high demands on both functionality and appearance. We have developed windows with different design and functional solutions for comfort ventilation, smoke ventilation and evacuation. Windows can be complemented with mechanical or automatic closing fittings. Our building system for doors has a wide range of uses with possibilities for many functions. Our door solutions suit offices, hospitals, schools and universities, homes, industries, administrations, sport halls, exhibition centres, arenas and shopping malls. Doors 415 with door SX with door SG with door 274 Sizes. We do not have modular sizes that limit your choice. Functionally adapted for safety and security, fire and evacuation, free opening size, stability, fittings, filling, glass, etc. Choose your design via profile type, surface treatment, fittings, proportions and material choice, glass or filling, etc. 374 with door with door 25 Products Openable units: Doors 25 Door 26 Door 274 Door 25 Sliding door SX 415 SSG Other 415 EF 55 SG SX only fixed sections 4

41 Windows 415 with inward opening window with outward opening window with inward opening block window with outward opening facade window SX with inward opening window 174 SX. 415 SSG with outward opening facade window SG with outward opening facade window with inward opening window with inward opening window 15. Products Openable units: Windows 174 inward 174 outward 174 SX inward 474 outward 15 inward SX 415 SSG 415 EF 55 SG SX 41

42 42

43 Sapa Facades and Glazed Elements Fillings and glass Choice of glass. There are different alternatives, depending on the comfort and energy demands. Profiles that have space for insulated triple glazing naturally give the greatest freedom of glass choice. There are several different types of glass for functions such as personal safety, burglary protection, fire protection, sound deadening, dirt repulsion, solar protection and energy saving. You can even screen print on glass in various patterns or use coloured glass. Things to think about. Glass surfaces that are unprotected and positioned so that people can come in contact with them, must be designed so that the risk for personal injury is limited. Such glass surfaces must be dimensioned for the dynamic influence of a person. Adhere to applicable standards and demands. Choice of filling. Certain parts of an element can or must be fitted with fillings. It is important to consider the material and outer surface of these. If the filling is subject to heavy blows or mechanical loads, one should choose a material of tough board material and surface such as stainless or enamelled steel plate. You can find more alternatives and associated U-value calculations on our website. Decorative profile depth 2-2 mm Total build depth Rebate depth mm Framework profile depth 35-3 mm Glass 415 SX Inner joint strip Outer joint strip Decorative profile Glass carrier Day opening size Glass size = day opening size + 28 mm Glass rebate size Glass holder Glass Venting and draining Glass holder screw Glass thickness mm Facade glass 5-12 mm Diffusion barrier Int. cladding Filling 415 SX Ventilated air gap Mineral wool insulation Weather board Venting and draining Facade sheet metal Board Air gap Filling construction 43

44 Colour selection and choice of material create the entirety of the whole. Use the possibilities in our system. 44

45 Sapa Facades Surface treatment and colour Aluminium is a beautiful material. Anodising protects and enhances the metallic character of the surface. We offer six different colours of anodizing. Most of the colours in the NCS-S and RAL spectrums can be used for powder coating. We have chosen a gloss value of 8 since this gives the surface a sober and resistant finish. Decoral provides yet another possibility for decorative surfaces on aluminium profiles. It is basically a powder coating solution that is complemented with the desired pattern. You can combine the different surface treatments to your advantage and create the expression you desire. On exposed parts, such as door leaves and fittings, it is often an advantage to use natural anodisation. The whole is more important than the parts. Think about giving complementary components the same surface finish. We offer the widest surface treatment program in the Nordic area, with three surface treatment methods for aluminium profiles. Each method has its strengths, its advantages. Which of them is preferable depends on the situation and taste. 45

46 46

47 Sapa Building System Where to find us In the Nordic countries, The Baltic and Hungary, Sapa Building System AB is responsible for our business, through the Sapa Building System product program. The headquarters for these markets can be found in Vetlanda, Sweden. Sales offices can be found in Norway, Denmark, Finland and Lithuania, with agents in Hungary and on Iceland. These provide support to architects, builders, contractors, etc. and also to each respective country s network of qualified and well educated independent manufacturers. Headquarters Sales offices Manufacturers Agents Architect Support Our free Architect Support service provides support for architects, designers, builders, contractors and administrators. Based on the demands, requirements and technical pre-requisites in individual projects, we can provide proposals for suitable solutions. A discussion with our engineers makes it easier to choose a design solution. The earlier we come into contact with each other, the easier it will be to reach your goal. On our website, we have collected together inspiration, advice and tips for the creative phase. Our website also contains considerable project planning support and downloadable details. Our printed matter can be ordered from Architect support or from our website. Find your local contact on our website: sapabuildingsystem.se 47

48 Sapa building system ab offices AGENTS Sweden: Lithuania: Hungary: Headoffice Sapa Building System AB Vetlanda Phone Fax [email protected] UAB Sapa Statybų Sistemos Kirtimu g.47, LT-2244 Vilnius Phone Fax [email protected] Vetlanda Kft. Szabó Illunka u. 22, HU-115 Budapest Phone Fax [email protected] Denmark: Sapa Building System Langhøjvej 1 Indgang A 8381 Tilst Phone Fax [email protected] Finland: Sapa Building System Sinikalliontie 18 A, 263 Espoo Phone Fax [email protected] Norway: Sapa Building System Pb. 34, 227 Kjeller Phone Fax [email protected] Nordikal Kft Bartók Béla út 152, HU-1113 Budapest Phone Fax [email protected] Iceland: Gluggasmidjan hf. Vidarhöfda 3, 112 Reykjavik Phone Fax [email protected] Sapa Building System AB GB-5/12.27 Condesign Infocom AB 212 Head office Sweden Sapa Building System AB S Vetlanda Tel Fax [email protected] Internet: ARCHITECTURAL ALUMINIUM SOLUTIONS