- 1 - Model: (SATA to USB+Hub+1394a) Code Description: S---SATA Harddisk. ES---ESATA Interface. U---USB2.0 Interface. F---IEEE1394 Interface

Transcription

1 Model: PCI-S/ESR PCI-S/UH PCI-S/UHF (SATA to ESATA) (SATA to USB+HUB) (SATA to USB+Hub+1394a) Code Description: S---SATA Harddisk ES---ESATA Interface U---USB2.0 Interface F---IEEE1394 Interface H---USB HUB R---RAID - 1 -

2 Features --- Maximum transfer rate up to: 400Mbps for 1394a, 480Mbps for USB2.0 Complies with SATA-I, SATA-II interface, transfer rate up to 1.5Gbps & 3.0Gbps With independent HDDs and RAID0 functions. Support RAID0,1,1+0, 5(*for PCI-S/ESR only). Support Hot-Plug & Play. No extra driver needed for the installation

3 I. [Parts Description] PCI-S/ESR (See picture A) A1 SATA Port 0 A2 SATA Port 1 A3 SATA Port 2 A4 SATA Port 3 A5 SATA Port 4 A6 esata Port - 3 -

4 PCI-S/UHF (See picture B) B1 SATA Port 0 B2 SATA Port 1 B3 SATA Port 2 B4 SATA Port 3 B5 USB2.0 Port B6 USB2.0 Host Port (Hub x 2) - 4 -

5 PCI-S/UHF (See Picture C) C1 SATA Port 0 C2 SATA Port 1 C3 SATA Port 2 C4 SATA Port 3 C5 IEEE1394a Port 1 C6-- IEEE1394a Port 2 C7-- USB2.0 Port C8 USB2.0 Host Port (Hub x 2) - 5 -

6 II. [Hardware Installation] The PCI card is arranged in pairs with ST-2350 SATA Enclosure. Before installation, make sure the SATA HDD and SATA Enclosure are able to be work. The Installation Steps are as follows: Step.1 Prepared the PCI card and SATA Enclosure ready. (See Picture D-1) Picture D-1 Step.2 Loose the screw & open the sideboard(see Picture D-2) and use a screwdriver to open the PCI slot plate(see D-2a)

7 Picture D-2 Step.3 Install PCI card to SATA Enclosure (See Picture D-3) Picture D-3-7 -

8 Step.4 Connect the power cable of PCI card and mounting the PCI card on by the provided screws. (See Picture D-4) Picture D-4 Step.5 Mount sideboard back to the SATA enclosure(see Picture D-5) and then tighten the screw

9 Picture D-5 Step.6 Connect SATA data cables between PCI card and SATA Enclosure. Make sure SATA Port 0 to SATA Port 0, 1 to 1, 2 to 2, 3-3, 4-4, etc. Note: PCI-SUH and PCI-SUFH cards support 4 HDDs only, so SATA Enclosure will reserve one port when connecting PCI-S/UH and/or PCI-S/UFH card. (See Picture D-6) - 9 -

10 Picture D-6 III. [Software Installation] System requirement: PCI-S/ESR Support Windows 2000/xp, Windows NT, WinXP_ bit PCI-S/UH, S/UFH Support Windows 98SE/ME/2000/XP, Mac 9.0 & higher PCI-S/ESR card, which is arranged in pairs with Silicon lmage 3124/3132 esata card, supports RAID0, 1, 1+0, 5 function. Here is an example of RAID 1+0 configuration to show

11 how to build RAID configuration. Please make sure the ESATA card which you use is Silicon lmage 3124 or Then, update the BIOS and driver. Afterward, install the GUI RAID program. As following pictures, Steps for building Raid 0(Mirror Strip) 1. Click SATA Raid5 Manager

12 2.Go to SATA Raid5 Manager Window

13 3.Select RAID Group \ Create RAID Group

14 4.Go to Create RAID Group window

15 5.Chose the RAID configuration type you want from the Configuration section menu

16 6.For example, To Build RAID0+1(Mirrored Striped),please see following steps. Select Max in the Capacity column. Select 128KB in the Chunk Size section

17 7.Select 4 HDDs for building Raid0+1configuration(*When you build the Raid with 4 HDDs). Click on Create

18 8. See the following menu that RAID 0+1 configuration is completed. Close the window

19 9. In the disk management, we can find the status of the total HDD size after RAID0 built

20 10. Them, start to format the hard disks

21 Ⅳ. [PCI-S/UHF Win98se Driver Installation] We need to prepare some files in Win2000 and Win98se CD. Windows 2000 Professional ( Use Microsoft MSDN Disc / April 2002 ): 1. USBSTOR.sys C:\WINNT\system32\driver\ 2. USBSTOR.inf & USBSTOR.PNF C:\WINNT\inf\ Windows 98 Second Edition install CD ( Use Microsoft MSDN Disc 2397 / October 2003 ): 1. NTMAP.sys D:\ENGLISH\WIN98SE\BASE5.CAB 2. NTMAP.inf D:\ENGLISH\WIN98SE\PRECOPY2.CAB 3. NTMAP.cat D:\ENGLISH\WIN98SE\CATALOG3.CAB 4. NTMAPHLP.PDR

22 D:\ENGLISH\WIN98SE\BASE5.CAB Then, copy these files to the new folder under OS Win98se (e.g. C:\Win98se_USB_driver). When the USB cable is plugged in the PC, the system will show a message that the system finds the USB Mass Storage Device. Select the recommended mode

23 Select the Specify a location : and key-in the location (e.g. C:\Win98se_USB_driver)

24 Install success from the new driver to the system

25 Then, the system will detect the new hard disk through U92X serial product board. The system will detect the USB device is 1394/USB Disk in the Device Manager, and will show that it needs the NTMAP.INF to install the driver in the system

26 Install success from the new driver to system

27 In the Device Manager, we can find the new hard disk in the Disk drives And also can find 1394/USB Disk in the Storage device, USB Mass Storage Device in the Universal Serial Bus controllers

28 In the Registry Editor. We can find the new storage information in the location as below: My Computer\HKEY_LOCAL_MACHINE\Enum\USBSTO R\ e.g. Hard disk model name is WD800JD-60LUA0 ( SATA II 80G )

29 - 29 -

30 Ⅴ. [PCI-S/UH Win98 Driver Installation] When the USB cable is plugged in the PC, the system will show a message that the system finds the USB Mass Storage Device

31 Select the recommended mode. Select the Specify a location : and key-in the location (e.g. D:\JM20336_Win98 driver)

32 Install success from the new driver to the system

33 Press 'finish' to complete the installation