Fixing and Supports for Plumbing, Fire Protection, Heating, Ventilation and Air Conditioning. Residential Range Products - New Zealand

Transcription

1 Fixing and Supports for Plumbing, Fire Protection, Heating, Ventilation and Air Conditioning Residential Range Products - New Zealand

2 Pipe Clips - Copper Half Saddle imber/steel wall stud - vertical Page 4 Saddle imber/steel wall stud - vertical or horizontal Bracket Clip imber/steel wall stud - vertical or horizontal 5 Single Piece Clip imber/steel wall stud - vertical or horizontal 6 Nut Clip Suspended from concrete or steel roof 6 Stand-Off Bracket all vertical pipe installation 7 Pipe Clips - PVC Single Piece Clip Fixed to concrete ceiling 7 Flush Fitting Clip all vertical pipe installation 8 Stand-Off all Clip all vertical pipe installation 8 2 Single Piece Hanger Fixed to concrete ceiling 9 Hanging Clip Fixed to concrete ceiling/steel or timber roof/floor joist 9 Nut Clip Suspended from concrete or steel roof 10 Adjustable Clamp Suspended from concrete or steel roof 10 Stand off Bracket Fixed to concrete ceiling 11 Plastic Clips and fixings CADDY SUPERKIP Fixed to concrete ceiling or wall 11 3 CADDY SUPERKIP base plates Fixed to concrete ceiling or wall 12 CADDY SUPERKIP IN Fixed to concrete ceiling or wall 12 CADDY SUPERKIP CA Fixed to concrete ceiling or wall 12 Pipe Clamps - Steel CADDY MACROFIX 250 Suspended from concrete or steel roof 13 CADDY MACROFIX PUS NI 429 Suspended from concrete or steel roof 13 4 CNC Nut Clips Suspended from concrete or steel roof 14 Adjustable Clamp Suspended from concrete or steel roof - Carpark 14 ERIC18 Suspended from concrete or steel roof - Carpark 15 Shallow Saddle Clip Suspended from concrete or steel roof - Carpark 15 Saddle Clamp Suspended from concrete or steel roof 16 Pipe Camps - Insulated 5 CADDY SUPERFIX 243 Suspended from concrete or steel roof 17 CADDY MACROFIX 250 Suspended from concrete or steel roof 18 CADDY MACROFIX PUS F 430 Suspended from concrete or steel roof 19 6 Stainless Steel Clamps CADDY MACROFIX - Uninsulated Suspended from concrete or steel roof - Carpark 20 CADDY MACROFIX - Insulated Suspended from concrete or steel roof - Carpark 21 Installation Accessories elescopic Bracket (SGB) all vertical pipe installation 22 PC Nylon Pipe Clamp all vertical pipe installation 22 Barrnog all vertical pipe installation 23 Metal Stud Punch (MSP) all application 23 Grommet (ESGP) all application 24 7 all Bracket Use with SPC or BRC 24 Adjustable Stand-off Bracket Use with SPC or BRC 25 Hanging Strap Use with SPC or BRC - suspended from concrete or steel roof 25 Rod Connectors Use with SPC or BRC - suspended from concrete or steel roof 26 Mounting Plates - Vertical Use with threaded rod from steel roof with NU, CADDY MACROFIX, CADDY SUPERFIX, CNC, etc. Purlin Clips Use with threaded rod from steel roof with NU, CADDY MACROFIX, CADDY SUPERFIX, CNC, etc Innovation and Quality he Cornerstones of Our Business For more than 100 years, ERICO has built its reputation by developing and marketing high-quality, innovative products. As a trusted industry leader, our products and services are recognized for providing labor-saving and cost-saving solutions for customers throughout the world. It is our goal to continue to create high-quality, state-of-the-art products, while also providing the unparalleled service our customers have come to expect. A well known brand of ERICO, CADDY offers cost-effective solutions to the residential market with a wide range of pipe supports for roof/ceiling, wall, timber, or car park, etc. Suitable for the installation of plumbing, heating, ventilation, air-conditioning, and fire sprinkler pipe work, this innovative range of fixings and supports will save you time and money. 7 ROOF 7 ROOF 7 ROOF 1 IMBER 1 IMBER 3 A 3 A 7 ROOF 7 ROOF 1 IMBER 1 IMBER 2

3 3 CEIING 5 CEIING/ROOF 2 CEIING/ROOF 2 CEIING/ROOF 2 CEIING/ROOF 4 CEIING/ROOF 4 CEIING/ROOF 3 CEIING 5 CEIING/ROOF 2 CEIING/ROOF 2 CEIING/ROOF 2 CEIING/ROOF 4 CEIING/ROOF 4 CEIING/ROOF 1 CEIING/ROOF 5 CEIING/ROOF 7 A 7 A 7 A 7 A 7 A 7 A 2 A 7 A 6 CARPARK 6 CARPARK 2 A 1 A 4 CARPARK 4 CARPARK 4 CARPARK 3

4 Half Saddle Clip - CU-HF for Copper Pipe Supports copper tube Half saddle clip sizes 15 mm and 20 mm Single fastener Finish: Polyester powder coating (PPC) brown Pipe Actual x Box Size Pipe OD (mm) (mm) Qty. (mm) (mm) CU-HF-015-PPC x CU-HF-020-PPC x Copper Saddles - CU-SAD for Copper Pipe ight duty support for copper tubing Copper saddle sizes 6 mm to 25 mm Attaches directly to wall or ceiling Supports pipe close to wall or ceiling Material: Copper Pipe Actual x Box Size Pipe OD (mm) (mm) Qty. (mm) (mm) CU-SAD x CU-SAD x CU-SAD x CU-SAD x CU-SAD x CU-SAD x CU-SAD x

5 Copper Saddle - CUS for Copper Pipe ight duty support for copper tubing Copper saddle sizes 6 mm to 50 mm Attaches directly to horizontal or vertical wall Supports pipe close to wall or ceiling Finish: Polyester powder coating (PPC) brown Pipe Actual x Box Size Pipe OD (mm) (mm) (mm) Qty. (mm) (mm) CUS-006-CU-PPC x CUS-008-CU-PPC x CUS-010-CU-PPC x CUS-012-CU-PPC x CUS-016-CU-PPC x CUS-020-CU-PPC x CUS-025-CU-PPC x CUS-032-CU-PPC x CUS-040-CU-PPC x CUS-050-CU-PPC x Bracket Clip - BRC for Copper Pipe Bracket clips for sizes 15 mm to 100 mm wo piece for fast convenient installation Finish: Polyester powder coating (PPC) brown Pipe Actual x S Box Size Pipe OD (mm) (mm) (mm) Qty. (mm) (mm) BRC-015-CU-PPC x BRC-020-CU-PPC x BRC-025-CU-PPC x BRC-032-CU-PPC x BRC-040-CU-PPC x BRC-050-CU-PPC x BRC-065-CU-PPC x BRC-080-CU-PPC x BRC-100-CU-PPC x S S 5

6 Single Piece Clip - SPC for Copper Pipe Supports copper pipe services with wall bracket, hanging strap or ERIC 1010 Single piece clip for sizes 15 mm to 150 mm One piece clip for fast convenient installation Available in stainless steel grade 316 Finish: Polyester powder coating (PPC) brown Pipe Actual x S Box Size Pipe OD (mm) (mm) (mm) Qty. (mm) (mm) S S SPC-015-CU-PPC x x SPC-020-CU-PPC x x SPC-025-CU-PPC x x SPC-032-CU-PPC x x SPC-040-CU-PPC x x SPC-050-CU-PPC x x SPC-065-CU-PPC x x SPC-080-CU-PPC x x SPC-100-CU-PPC x x SPC-125-CU-PPC x x SPC-150-CU-PPC x x Nut Clip - NU for Copper Pipe Suspended pipe services Nut Clip sizes 15 mm to 150 mm Cup head fastener Doubled bolted Suits M10 rod Finish: Polyester powder coating (PPC) brown H Pipe Actual x H Fastener Max. Rec. Box Size Pipe OD (mm) (mm) (Imperial) oad (N) Qty. (mm) (mm) NU-015-CU-PPC x /4 x NU-020-CU-PPC x /4 x NU-025-CU-PPC x /4 x NU-032-CU-PPC x /4 x NU-040-CU-PPC x /4 x NU-050-CU-PPC x /4 x NU-065-CU-PPC x /4 x NU-080-CU-PPC x /4 x NU-100-CU-PPC x /16 x NU-125-CU-PPC x /16 x NU-150-CU-PPC x /16 x

7 Stand off Bracket - SOB for Copper Pipe Stand off bracket for vertical pipe services Stand off bracket sizes 40 mm to 150 mm Attaches directly to horizontal or vertical structural member Double bolted Finish: Polyester powder coating (PPC) brown NOE: Follow fastener manufacturer s recommended shear and pull-out strength when fastening to the structure. Pipe Actual x Fastener Max. Rec. Box Size Pipe OD (mm) (mm) (mm) oad (N) Qty. (mm) (mm) SOB-040-CU-PPC x M8 x SOB-050-CU-PPC x M8 x SOB-065-CU-PPC x M8 x SOB-080-CU-PPC x M8 x SOB-100-CU-PPC x M8 x SOB-125-CU-PPC x M8 x SOB-150-CU-PPC x M8 x Single Piece Clip - SPC for PVC & Pressure PVC Pipe Supports PVC pipe services with wall bracket, hanging strap or ERIC 1010 Single piece clip for sizes 40 mm to 150 mm One piece clip for fast convenient installation Finish: Polyester powder coating (PPC) white Pipe Actual x S Box Size Pipe OD (mm) (mm) (mm) Qty. (mm) (mm) For PVC Pipe: SPC-040-PVC-PPC x x SPC-050-PVC-PPC x x SPC-065-PVC-PPC x x SPC-080-PVC-PPC x x SPC-090-PVC-PPC x x SPC-100-PVC-PPC x x SPC-150-PVC-PPC x x For Pressure PVC Pipe: SPC-015-PPVC-PPC x x SPC-020-PPVC-PPC x x SPC-025-PPVC-PPC x x SPC-032-PPVC-PPC x x SPC-040-PPVC-PPC x x SPC-050-PPVC-PPC x x SPC-065-PPVC-PPC x x SPC-100-PPVC-PPC x x S S 7

8 Flush Fitting Clip - FFC for PVC Pipe Horizontal and vertical support for close fit PVC pipe Flush fitting clip sizes 40 mm to 100 mm Suits DV and PVC pipe Finish: Polyester powder coating (PPC) white Pipe Actual x Box Size Pipe OD (mm) (mm) (mm) Qty. (mm) (mm) FFC-040-PVC-PPC x FFC-050-PVC-PPC x FFC-065-PVC-PPC x FFC-075-PVC-PPC x FFC-080-PVC-PPC x FFC-090-PVC-PPC x FFC-100-PVC-PPC x Stand off all Clip - SO for PVC Pipe Horizontal and vertical PVC pipe services Stand off wall clip for sizes 40 mm to 100 mm Suits DV and PVC pipe Finish: Polyester powder coating (PPC) white Pipe Actual x H Box Size Pipe OD (mm) (mm) (mm) Qty. (mm) (mm) SO-040-PVC-PPC x SO-050-PVC-PPC x SO-065-PVC-PPC x SO-080-PVC-PPC x SO-090-PVC-PPC x SO-100-PVC-PPC x H 8

9 Single Piece Hanger - SPH for PVC Pipe Suspends PVC pipe services Hanging clip for sizes 40 mm to 100 mm Suits DV and PVC pipe Cut to length 450 mm strap Finish: Polyester powder coating (PPC) white, EG strap Pipe Actual x Strap Box Size Pipe OD (in) ength ( x ) Qty. (mm) (mm) (mm) (mm) SPH-040-PVC-PPC x x 6 20 SPH-050-PVC-PPC x x 6 20 SPH-065-PVC-PPC x x 6 20 SPH-080-PVC-PPC x x 6 20 SPH-090-PVC-PPC x x 6 20 SPH-100-PVC-PPC x x Hanging Clip - HNG for PVC Pipe Suspends PVC pipe services Hanging clip for sizes 40 mm to 150 mm Suits DV and PVC pipe Double bolted 450 mm strap Finish: Polyester powder coating (PPC) white Pipe Actual x Strap Box Size Pipe OD (mm) ength (mm) Qty. (mm) (mm) (mm) HNG-040-PVC-PPC x HNG-050-PVC-PPC x HNG-065-PVC-PPC x HNG-080-PVC-PPC x HNG-090-PVC-PPC x HNG-100-PVC-PPC x HNG-150-PVC-PPC x

10 Nut Clip - NU for PVC Pipe Suspended pipe services Nut clip sizes 40 mm to 150 mm Cup head fastener Doubled bolted Suits M10 rod Finish: Polyester powder coating (PPC) white H Pipe Size Actual Pipe x H Surface Fastener Max. Rec. Box (mm) OD (mm) (mm) (mm) Finish (Imperial) oad (N) Qty. NU-040-PVC-PPC x PPC 1/4 x NU-050-PVC-PPC x PPC 1/4 x NU-065-PVC-PPC x PPC 1/4 x NU-080-PVC-PPC x PPC 1/4 x NU-090-PVC-PPC x PPC 5/16 x NU-100-PVC-PPC x PPC 5/16 x NU-150-PVC-PPC x PPC 5/16 x Adjustable Clamp - ADJ for PVC Pipe Suspend horizontal & vertical pipe services Adjustable bracket sizes 40 mm to 300 mm Adjustable yoke 48 mm to 65 mm Double bolted Suits up to M12 rod Finish: Polyester powder coating (PPC) white or hot dip galvanised (HDG) RS B PPC HDG Pipe Actual RS x B Fastener Max. Rec. Box Size Pipe OD (mm) (mm) oad (N) Qty. (mm) (mm) ADJ-040-PVC-PPC ADJ-040-PVC-HDG M8 20 x M8 x ADJ-050-PVC-PPC ADJ-050-PVC-HDG M8 20 x M8 x ADJ-065-PVC-PPC ADJ-065-PVC-HDG M8 20 x M8 x ADJ-080-PVC-PPC ADJ-080-PVC-HDG M8 20 x M8 x ADJ-100-PVC-PPC ADJ-100-PVC-HDG M8 20 x M8 x ADJ-150-PVC-PPC ADJ-150-PVC-HDG M8 25 x M8 x ADJ-225-PVC-PPC ADJ-225-PVC-HDG M12 40 x M12 x ADJ-300-PVC-PPC ADJ-300-PVC-HDG M12 40 x M12 x

11 Stand off Bracket - SOB for PVC Pipe Stand off bracket for vertical pipe services Stand off bracket sizes 40 mm to 300 mm Attaches directly to horizontal or vertical structural member Double bolted Finish: Polyester powder coating (PPC) white NOE: Follow fastener manufacturer s recommended shear and pull-out strength when fastening to the structure. Pipe Size Actual Pipe x Fastener Max. Rec. Box (mm) OD (mm) (mm) (mm) (mm) oad (N) Qty. SOB-080-PVC-PPC x M8 x SOB-090-PVC-PPC x M8 x SOB-100-PVC-PPC x M8 x SOB-150-PVC-PPC x M8 x SOB-225-PVC-PPC x M12 x SOB-300-PVC-PPC x M12 x Pipe Fixings CADDY SUPERKIP ube and Pipe Clamp Size Range: 12 mm to 64 mm Pushing the tube into the clamp closes and locks the pipe clamp Fasten with either wood screw, dual threaded screw with or without collar, nail with collar or M6 threaded rod Age resistant, UV resistant, suitable for outdoor applications Color: Gray Steel Copper A B C Max. Rec. Box Description Pipe OD ubing OD (mm) (mm) (mm) oad (N) Qty. (mm) (mm) CADDY SUPERKIP 12 mm CADDY SUPERKIP 15 mm CADDY SUPERKIP 17 mm CADDY SUPERKIP 20 mm CADDY SUPERKIP 22 mm CADDY SUPERKIP 25 mm CADDY SUPERKIP 28 mm CADDY SUPERKIP 32 mm CADDY SUPERKIP 36 mm CADDY SUPERKIP 40 mm CADDY SUPERKIP 47 mm CADDY SUPERKIP 51 mm CADDY SUPERKIP 59 mm

12 CADDY SUPERKIP BP A A A Fig. 1 Fig. 2 M4 M4 Fig. A CADDY SUPERKIP IN M P M M8 1 CADDY SUPERKIP CA Ø (mm) P

13 CADDY MACROFIX 250 M8/M10 2 screw pipe clip with M8/M10 boss Multi-function screw with hexagonal combination head (slot & crosshead), c/w retaining washer Steel profile ( x ) Closed cap nut helps prevent rod damage to hanger Finish: Electro-zinc plated (EG) Ø d x Sc x Max. Rec. Box (mm) (mm) (mm) oad (N) Qty. M8/M x 1.5 M6 x x 1.5 M6 x x 1.5 M6 x x 1.5 M6 x x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x x 2.5 M8 x x 2.5 M8 x x 2.5 M8 x d Sc CADDY MACROFIX PUS NI screw pipe clip with M8/M10 boss Multi-function screw with hexagonal combination head FM Approved (20nb - 50nb) U isted under U 203 for fire protection applications of CPVC pipe (up to 100nb) Patented easy-closing mechanism on one side Flared edges and specially designed welding area protect CPVC piping RS Ø (in) DN d (mm) Rod Size (in) x Sc x Max. Rec. oad (N) / M10 30 x 1.5 M6 x / M10 30 x 1.5 M6 x M10 30 x 1.5 M6 x / M10 30 x 1.5 M6 x / M10 30 x 2.0 M6 x M10 30 x 2.0 M6 x / M10 30 x 2.0 M6 x / M12 30 x 2.0 M6 x M10 30 x 2.0 M6 x M12 30 x 2.0 M6 x M10 30 x 2.5 M6 x M12 30 x 2.0 M6 x M10 30 x 2.5 M6 x d Sc 13

14 CNC Nut Clip - CNC for Steel Pipe Suspended sprinkler fire pipe services Nut Clip sizes 20 nb to 150 nb Cup head fastener Doubled bolted Up to 4000 (N) load capacity Available in M10 and M12 Finish: Electro-zinc plated (EG) Pipe Actual x Fastener Max. Rec. Size Pipe (mm) (Imperial) oad (N) (nb) OD M10/M12 RS=M10 RS=M12 (mm) CNC x 3.0 1/4 x CNC x 3.0 1/4 x CNC x 3.0 1/4 x CNC x 3.0 1/4 x CNC x 3.0 1/4 x CNC 65 CNC 65 M x 3.0 1/4 x /1500 CNC 80 CNC 80 M x 3.0 1/4 x /1500 CNC 100 CNC 100 M x 5.0 5/16 x /2500 CNC 125 CNC 125 M x 5.0 5/16 x /4000 CNC 150 CNC 150 M x 5.0 5/16 x /4000 RS Adjustable Clamp - ADJ for Steel Pipe Suspend horizontal & vertical pipe services Adjustable bracket sizes 15 nb to 150 nb Adjustable yoke 48 mm to 65 mm Double bolted Suits up to M8 rod Finish: Hot dip galvanised (HDG) RS B Pipe Size Actual Pipe RS x B Fastener Max. Rec. Box (nb) OD (mm) (mm) (mm) oad (N) Qty ADJ-015-GIR-HDG M8 20 x M8 x ADJ-020-GIR-HDG M8 20 x M8 x ADJ-025-GIR-HDG M8 20 x M8 x ADJ-032-GIR-HDG M8 20 x M8 x ADJ-040-GIR-HDG M8 20 x M8 x ADJ-050-GIR-HDG M8 20 x M8 x ADJ-065-GIR-HDG M8 20 x M8 x ADJ-080-GIR-HDG M8 20 x M8 x ADJ-100-GIR-HDG M8 20 x M8 x ADJ-125-GIR-HDG M8 20 x M8 x ADJ-150-GIR-HDG M8 20 x M8 x

15 ERIC18 - Adjustable Clamp for Steel Pipe Adjustable suspension of horizontal & vertical pipe services wo piece bracket sizes 50 nb to 250 nb & 125 mm and 150 mm copper pipe Adjustable yoke Double bolted Finish: Hot dip galvanised (HDG) Pipe Actual x Max. Box Size Pipe OD (mm) (mm) (mm) Rec. Qty. (nb) (mm) oad (N) ERIC x ERIC x ERIC x ERIC x ERIC x ERIC x ERIC x Shallow Saddle Clip - CS for Steel Pipe ight duty support for steel pipe Steel saddle sizes 25 nb to 65 nb Attaches directly to horizontal or vertical structural member Fixes fire pipe directly to wall or ceiling Finish: Electro-zinc plated (EG) NOE: Follow fastener manufacturer s recommended shear and pull-out strength when fastening to the structure. Pipe Size Actual Pipe x Max. Rec. Box (nb) OD (mm) (mm) (mm) (mm) oad (N) Qty. CS x CS x CS x CS x CS x

16 Saddle Clamp - SAD for Steel Pipe ight & Medium duty support for Steel pipe Steel saddle sizes 20 nb to 250 nb Attaches directly to horizontal or vertical structural member Fixes pipe directly to wall or ceiling Finish: Hot dip galvanised (HDG) NOE: Follow fastener manufacturer s recommended shear and pull-out strength when fastening to the structure. Pipe Actual x Max. Rec. Box Size Pipe OD (mm) (mm) (mm) oad (N) Qty. (nb) (mm) SAD-020-GIR-HDG x SAD-025-GIR-HDG x SAD-032-GIR-HDG x SAD-040-GIR-HDG x SAD-050-GIR-HDG x SAD-065-GIR-HDG x SAD-080-GIR-HDG x SAD-100-GIR-HDG x SAD-150-GIR-HDG x SAD-200-GIR-HDG x SAD-250-GIR-HDG x

17 CADDY SUPERFIX 243 M8/M10 One piece pipe clip with M8/M10 combi boss Easy to install locking mechanism EPDM rubber insulation for sound reduction compliant with DIN 4109, average degree of improvement: 20dB Cylinder head screw M6 (+ 101 mm = M8) with combination head (slot & crosshead) Steel profile ( x ) For pipe diameter from 12 to 114 mm emperature rating from -50 C up to +110 C Fire rating B2 acc. to DIN EN :E Closed cap nut prevents rod damage to hanger Finish: Electro-zinc plated (EG) NE Ø d x Sc x Max. Rec. (in) (mm) (mm) oad (N) / x 1.5 M6 x / x 1.5 M6 x / x 1.5 M6 x / x 1.5 M6 x x 1.5 M6 x x 1.5 M6 x / x 1.5 M6 x x 1.5 M6 x / x 1.5 M6 x x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x / x 2.0 M6 x x 2.0 M6 x x 2.5 M8 x x 2.5 M8 x M8/M10 d Sc B2 DIN EN :E - 50 /

18 CADDY MACROFIX 250 M8/M10 2 screw pipe clip with M8/M10 combi boss EPDM rubber insulation for sound reduction compliant with DIN 4109, average degree of improvement: 20dB M6 multi-function screw with hexagonal combination head (slot & crosshead), c/w retaining washer Steel profile ( x ) For pipe diameter from 12 mm to 168 mm emperature rating from -50 C up to +110 C Fire rating B2 acc. to DIN EN :E Closed cap nut prevents rod damage to hanger Finish: Electro-zinc plated (EG) Ø d x Sc x Max. Rec. (in) (mm) (mm) oad (N) / x 1.5 M6 x / x 1.5 M6 x / x 1.5 M6 x / x 1.5 M6 x x 1.5 M6 x / x 1.5 M6 x / x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x / x 2.0 M6 x x 2.0 M6 x x 2.0 M6 x x 2.5 M6 x x 2.5 M8 x x 2.5 M8 x x 2.5 M8 x x 2.5 M8 x x 2.5 M8 x x 2.5 M8 x M8/M10 d Sc B2 DIN EN :E - 50 /

19 CADDY MACROFIX PUS F screw pipe clip with M8/M10 boss Innovative design simplifies installation of plastic pipe Allow longitudinal movement of pipe from thermal expansion or contraction Comes with plastic washers to avoid crushing the CPVC pipe EPDM rubber glued in place Patented easy-closing mechanism on one side RS Sc Ø (in) DN d (mm) Rod Size (in) x Sc x Max. Recommended oad (N) d M10 30 x 1.5 M6 x / M10 30 x 1.5 M6 x / M10 30 x 1.5 M6 x M10 30 x 1.5 M6 x / M10 30 x 1.5 M6 x / M10 30 x 2.0 M6 x M10 30 x 2.0 M6 x M10 30 x 2.0 M6 x / M10 30 x 2.0 M6 x M10 30 x 2.0 M6 x M10 30 x 2.5 M6 x M10 30 x 2.5 M6 x M10 30 x 2.5 M6 x M10 30 x 2.5 M6 x

20 CADDY MACROFIX 2 Screw pipe clamp with boss M8 or M10 M6 multifunction screw with hexagonal combination head (slot & crosshead), c/w retaining washer Steel profile (B x S) For pipe diameter from 14 mm to 168 mm Finish: 316 Stainless steel (SS) Ø d B x S RS Max. Rec. (in) (mm) (mm) oad (N) / x 1.5 M / x 1.5 M / x 1.5 M x 1.5 M / x 1.5 M / x 1.5 M x 1.5 M x 1.5 M x 1.5 M / x 2.0 M x 2.0 M x 2.0 M x 2.0 M x2.0 M x 2.0 M x 2.5 M x 2.5 M x 2.5 M x 2.5 M x 2.5 M d 20

21 CADDY MACROFIX 2 Screw pipe clamp with boss M8 or M10 EPDM rubber insulation for sound reduction compliant with DIN 4109 M6 multifunction screw with hexagonal combination head (slot & crosshead), c/w retaining washer Steel profile (B x S) For pipe diameter from 12 mm to 220 mm emperature rating from -50ºC up to +110ºC Fire rating DIN EN :E Finish: 316 Stainless steel (SS) Ø d B x S RS Max. Rec. (in) (mm) (mm) oad (N) / x 1.5 M / x 1.5 M / x 1.5 M / x 1.5 M x 1.5 M / x 1.5 M / x 1.5 M x 1.5 M x 1.5 M x 2.0 M x 2.0 M / x 2.0 M x 2.0 M x 2.0 M x 2.0 M x 2.5 M x 2.5 M x 2.5 M x 2.5 M x 2.5 M x 2.5 M x 3.0 M x 3.0 M x 3.0 M B2 DIN EN :E d - 50 /

22 SGB 16 SGB 24 Support to enable the fixing of pipes in hollow walls he bracket can be extended in length between 280 mm up to 660 mm Fix the bracket between 2 vertical stands of the hollow wall system he perforations in the bracket allow quick fixings against the vertical beams of the walls and allow also the plastic pipe clamps to be mounted on the horizontal channel Use SMS8 self-tapping screw to fix on stud Finish: Electro-zinc plated (EG) (mm) Box Qty PC 112 PC 238 Nylon pipe clamp Nylon pipe clamp to be used together with SGB bracket Pipe diameter 9 mm to 61 mm Use self tapping screws to fix on metal stud IPC are supplied with self-tapping screw D (mm) Box Qty. D

23 Barrnog/SGBHD adjustable metal nogging imber or steel nogging frame construction Barrnog adjustable nogging up to 600 mm Suitable for timber and steel construction Pre-assembled metal nogging, fast, convenient and strong construction Finish: Electro-zinc plated (EG) Box (mm) (mm) (mm) Qty. Barrnog Hardware ools MSP Metal Stud Punch Used in the field for punching standard sized 34.1 mm holes in metal studs Cushioned handles mean less operator fatigue and more comfortable handling ool design with offset handles allows punch to work in confined locations and near perpendicular walls ightweight punch makes accurate location of holes easier Hardened steel components keep tool sharp longer less replacement Plastic grommets (ESGP) snap easily into 34.1 mm hole MSP

24 Hardware Grommet ESGP Easy Snap/Anti Rattle Pipe Grommet for Plastic Pipes and Copper ubing Size Range: Anti rattle tabs allow grommet to accommodate tubing from 15 mm thru 25 mm Yellow plastic pipe grommet provides 360º protection of plumbing and fire sprinkler plumbing in metal studs NOE: Snap one grommet into standard 34.1 mm field punched hole, or snap two together into any shape factory punched hole; anti-rattle tabs in ESGP allow grommet to accommodate copper tubing from 15 mm to 25 mm Size Box (mm) Qty. ESGP all Bracket - B Attaches to wall/ceiling with hanging strap, single piece clip, bracket clip all bracket for all sizes of, SPC & BRC products 20 mm adjustment Supplied with cup head fastener R Finish x R Box (mm) (mm) (mm) (mm) Qty. B-GA Zinc Plated 25 x B-PPC Powder Coated 22 x

25 Adjustable Stand Off Bracket - B-ADJ Attaches to wall/ceiling with hanging strap, single piece clip or bracket clip all bracket for all sizes of, SPC, BRC and ERIC 1010 products 47 mm adjustment Supplied with cup head fasteners Finish: Electro-zinc plated (EG) x R Box (mm) (mm) (mm) (mm) Qty. B-ADJ-GA 22 x 1, ,5 25 R Hanging Strap - for SPC Clip Vertical hanging support extension Hanging strap sizes 300 mm and 600 mm Suits all SPC single piece & BRC bracket clips Convenient cup head fastener Finish: Electro-zinc plated (EG) X X Surface Box (mm) (mm) (mm) (mm) Finish Bolt Qty. (Screw) -GA EG Cup head 1/4 x GA EG Cup head 1/4 x

26 Rod Connectors For connecting threaded rod to pipe hangers Size Range: M10 to M12 rod Finish: Electro-zinc plated (EG) ERC1010 x RS Height (mm) (mm) Adjustment ERC02510 ERC1010 M10 No ERC x CMP Mounting plate Mounting plate M8 through M12 Used in conjunction with threaded rod Finish: Electro-zinc plated (EG) NOE: Follow fastener manufacturer s recommended shear and pull-out strength when fastening to the structure. M Max. Rec. Box (mm) oad (N) Qty. 100 mm CMP8 M CMP10 M CMP12 M mm M 3 mm 26

27 Vertical Mounting Plate - VMP Vertical mounting plate M8 through M12 Horizontal pipe support application fastened to building structure Used in conjunction with threaded rod Finish: Electro-zinc plated (EG) NOE: Follow fastener manufacturer s recommended shear and pull-out strength when fastening to the structure. RS Max. Rec. Box (mm) oad (N) Qty. VMP8 M VMP10 M VMP12 M H M E2 Purlin Clip E2 for purlin application Size Range: M8, M10 and M12 sizes No mounting screws required Compatible with most purlin profiles A load rating is only applicable if the load-bearing capacity of the supporting element (purlin) is adequate. Finish: Electro-zinc plated (EG) H M Max. Rec. Box (mm) (mm) (mm) (mm) oad (N) Qty. E M E M E M H M 27

28 P2 i/ IN Ø1 Ø2 P Max. Rec. Box (mm) oad (N) Qty M6 7.0 P M8 8.5 P M P mm 11.0 P ,5mm 52mm 2 1 ARNING ERICO products shall be installed and used only as indicated in ERICO s product instruction sheets and training materials. Instruction sheets are available at and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death. ARRANY ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OHER ARRANY, HEHER EXPRESS OR IMPIED (INCUDING ANY ARRANY OF MERCHANABIIY OR FINESS FOR A PARICUAR PURPOSE), SHA EXIS IN CONNECION IH HE SAE OR USE OF ANY ERICO PRODUCS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer s receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO s prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. HE FOREGOING SAES BUYER S EXCUSIVE REMEDY FOR ANY BREACH OF ERICO ARRANY AND FOR ANY CAIM, HEHER SOUNDING IN CONRAC, OR OR NEGIGENCE, FOR OSS OR INJURY CAUSED BY HE SAE OR USE OF ANY PRODUC. IMIAION OF IABIIY ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO s employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHA IN NO EVEN BE RESPONSIBE FOR ANY OSS OF BUSINESS OR PROFIS, DONIME OR DEAY, ABOR, REPAIR OR MAERIA COSS OR ANY SIMIAR OR DISSIMIAR CONSEQUENIA OSS OR DAMAGE INCURRED BY BUYER. ERICO products may be purchased from the following independent distributor: Copyright 2011 ERICO International Corporation. All rights reserved. CADDY, CADED, CRIEC, ERICO, ERIFEX, ERIECH, and ENON are registered trademarks of ERICO International Corporation. M1032B-AUEN M228108AUEN 10M0411