BAM Certified Reference Materials
|
|
- Douglas Barker
- 8 years ago
- Views:
Transcription
1 BAM Certified Reference Materials Price list date We would like to inform you of the fact that our product range will be subject of German VAT from January 1, General Please send your purchase order for BAM-CRMs to: BAM Bundesanstalt für Materialforschung und pruefung Fachbereich 1.6 Richard-Willstaetter-Str Berlin phone: fax: webshop: Terms of delivery Prices include transport service by mail. (Presently, all prices are without VAT) Terms of delivery: free delivery: BAM usually delivers via DHL. If another courier or carrier etc. is desired, then the customer bears the costs at the point of destination. BAM will assume no further costs. Orders shipping to destinations outside Europe or bulky parcels is charged additionally (flat rate is deducted). Your products will be packed and shipped asap. Shipment will be performed by standard mail service. Duration of mail delivery cannot be guaranteed by BAM because of different national delivery services. Iron and steel products EURONORM certified reference materials Price D ECRM rods (Ø10mm x ~9cm) 100 g 115, D ECRM rods (Ø10mm x ~9cm) 100 g 115, D ECRM rods (Ø10mm x ~9cm) 100 g 115, D ECRM rods (Ø10mm x ~9cm) 100 g 115, D ECRM rods (Ø10mm x ~9cm) 100 g 115, Set: (026-1; 026-2; 027-1; 028-1; 029-1) rods (Ø10mm x ~9cm) 5x100 g 390, CRM Steel H1 pins á 1g d=6mm 100 pins 240, D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM powder 100 g 145,00 disc (Ø 40mm, h = 20 mm) 265,00 D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 140, D ECRM chips 100 g 140, D ECRM chips 100 g 140, D ECRM disc (Ø 35mm, h = 25 mm) D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 145,00 disc (Ø 39mm, h = 25 mm 265,00 D ECRM chips 100 g 135, D ECRM chips 100 g 145,00 disc (Ø 38mm, h = 35 mm) 265,00 D ECRM chips 100 g 140, D ECRM chips 100 g 140, D ECRM chips 100 g 140, D ECRM chips 100 g D ECRM chips 100 g 140, D ECRM chips 100 g 145, D ECRM chips 100 g 145,00 disc (Ø 39mm, h = 28 mm) 265,00 D ECRM chips 100 g 145,00 disc (Ø 38mm, h = 20 mm) 210,00 Seite 1 von 14
2 Price D ECRM chips 100 g 140,00 disc (Ø 38mm, h = 35 mm) D ECRM chips 100 g 140,00 disc (Ø 38mm, h = 35 mm) D ECRM chips 100 g 140, D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 145, D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 145,00 disc (Ø 37mm, h = 25 mm) 265,00 D ECRM chips 100 g 140, D ECRM chips 100 g 140, D ECRM chips 100 g 145, D ECRM chips 100 g 140, D ECRM chips 100 g 140,00 disc (Ø 36mm, h = 25 mm) D ECRM chips 100 g 140,00 disc (Ø 38mm, h = 35 mm) D ECRM chips 100 g 140,00 disc (Ø 38mm, h = 29 mm) D ECRM chips 100 g 140,00 disc (Ø 38mm, h = 29 mm) D ECRM chips 100 g 145,00 disc (Ø 38mm, h = 20 mm) 265,00 D ECRM chips 100 g 145,00 disc (Ø 38mm, h = 25 mm) 265,00 D ECRM chips 100 g 145,00 disc (Ø 38mm, h = 25 mm) 265,00 D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM chips 100 g 135, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 135, D ECRM powder 100 g 140, D ECRM powder 100 g 135, D ECRM powder 100 g 135, D ECRM powder 100 g 135, D ECRM powder 100 g 135, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM pellets ( µm) 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 140, D ECRM powder 100 g 115, D ECRM powder 100 g 115, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 44 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM disc (Ø 38 mm) 320,00 B-ECRM chips 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM powder 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 Seite 2 von 14
3 Price B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180, B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM chips 100 g 180,00 disc (Ø 38 mm, h = 30mm) 320,00 B-ECRM powder 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM chips 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM chips 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, B-ECRM powder 100 g 180, E-ECRM powder 100 g 180,00 - F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, Seite 3 von 14
4 Price F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170,00 disc (Ø 35-39mm, h= 20-35mm) 310,00 F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170,00 disc (Ø 35mm, h= 25mm) 310,00 F-ECRM chips 100 g 180,00 disc (Ø 40mm, h = 20mm) 310,00 F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM disc (Ø 40mm, h = 20mm) 530,00 F-ECRM disc (Ø 40mm, h = 20mm) 530,00 F-ECRM powder 100 g 335,00 disc (Ø 40mm, h = 20mm) 600,00 F-ECRM chips 100 g 180, F-ECRM chips 100 g 170, F-ECRM chips 100 g 180, F-ECRM chips 100 g 180, F-ECRM chips 100 g 180, F-ECRM chips 100 g 180, F-ECRM chips 100 g 170, F-ECRM chips 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM chips 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, F-ECRM powder 100 g 170, S-ECRM disc (Ø 38mm, h = 25mm) 310,00 S-ECRM powder 100 g disc (Ø 38mm, h = 25mm) 310,00 S-ECRM chips 100 g disc (Ø 38mm, h = 25mm) 310,00 S-ECRM chips 100 g disc (Ø 38mm, h = 25mm) 310,00 S-ECRM chips 100 g disc (Ø 38mm, h = 25mm) 310,00 S-ECRM chips 100 g disc (Ø 38mm, h = 25mm) 310,00 S-ECRM chips 100 g disc (Ø 38mm, h = 25mm) 310,00 S-ECRM powder 100 g - - S-ECRM powder 100 g - - S-ECRM powder 100 g - - Seite 4 von 14
5 Gamma reference sample set 60 Co-Gamma-control samples set 2 steel caps and 1 steel cylinder (Ø 35mm, h = 11 mm) 1200,00 Setting-up samples for spectrometric analysis SUS-1 R BAM cylinder Ø 50 mm x 42 mm 120,00 Non-ferrous metals Aluminium 201 chips 100 g 95, chips 100 g 95, chips 100 g 95,00 BAM-308 cylinder Ø 60 mm X 25 mm 235,00 BAM-310 cylinder Ø 60 mm X 25 mm 235,00 BAM-311 cylinder Ø 60 mm X 25 mm 235,00 ERM -EB313 (BAM-313) cylinder Ø 60 mm X 25 mm 235,00 BAM-EB316 cylinder Ø 50 mm X 30 mm BAM-EB317 cylinder Ø 50 mm X 30 mm Copper 223 chips 100 g 150, chips 100 g 150, chips 100 g 150, chips 100 g 150,00 BAM-229 chips 100 g 150,00 BAM-367 cylinder Ø 40 mm X 30 mm 265,00 BAM-368 cylinder Ø 40 mm X 30 mm 265,00 BAM-369 cylinder Ø 40 mm X 30 mm 265,00 BAM-370 cylinder Ø 40 mm X 30 mm 265,00 BAM-371 cylinder Ø 40 mm X 30 mm 265,00 BAM-372 cylinder Ø 40 mm X 30 mm 265,00 ERM -EB374 (BAM-374) cylinder Ø 40 mm x 30 mm 265,00 ERM -EB375 (BAM-375) cylinder Ø 40 mm x 30 mm 265,00 BAM-376 cylinder Ø 40 mm X 30 mm 265,00 ERM -EB377 (BAM-377) cylinder Ø 40 mm x 30 mm 265,00 ERM -EB378 (BAM-378) cylinder Ø 40 mm x 30 mm 265,00 BAM-379/1 cylinder Ø 40 mm x 30 mm 145,00 BAM-379/2 cylinder Ø 40 mm x 30 mm 145,00 BAM-379/3 cylinder Ø 40 mm x 30 mm 145,00 Satz BAM-379/1, 2 + 3) cylinder Ø 40 mm x 30 mm 340,00 BAM-M381 cylinder Ø 40 mm X 30 mm 265,00 BAM-M382 cylinder Ø 40 mm X 30 mm 265,00 BAM-M383a cylinder Ø 40 mm X 30 mm 265,00 BAM-M383b cylinder Ø 40 mm X 30 mm 265,00 BAM-M383c cylinder Ø 40 mm X 30 mm 265,00 BAM-M384a cylinder Ø 40 mm X 30 mm 265,00 BAM-M384b cylinder Ø 40 mm X 30 mm 265,00 ERM -EB385 (BAM-M385) cylinder Ø 40 mm x 30 mm 265,00 ERM -EB386 (BAM-M386) cylinder Ø 40 mm x 30 mm 265,00 ERM -EB387 (BAM-M387) cylinder Ø 40 mm x 30 mm 265,00 ERM -EB388 (BAM-M388) cylinder Ø 40 mm x 30 mm 265,00 ERM -EB389 (BAM-M389) cylinder Ø 40 mm x 30 mm 285,00 BAM-M390 cylinder Ø 40 mm X 30 mm 225,00 BAM-M391 cylinder Ø 40 mm X 30 mm 225,00 BAM-M392 cylinder Ø 40 mm X 30 mm 225,00 Seite 5 von 14
6 Lead BNM 010 powder 100 g 145,00 ERM -EB101a cylinder Ø 40 mm x 40 mm 225,00 ERM -EB102a cylinder Ø 40 mm x 40 mm 225,00 ERM -EB103 cylinder Ø 40 mm x 30 mm 225,00 ERM -EB104 cylinder Ø 40 mm x 40 mm 175,00 ERM -EB105 cylinder Ø 40 mm x 40 mm 175,00 ERM -EB106 cylinder Ø 40 mm x 40 mm 175,00 ERM -EB107 cylinder Ø 40 mm x 40 mm 190 Zinc BAM-M601 cylinder Ø 45 mm x 30 mm 210,00 ERM -EB602 cylinder Ø 39 mm x 39 mm Precious metals BAM-501 powder 6 g 240,00 ERM -EB506 slice Ø 15.8 mm x 0.25 mm 215,00 ERM -EB507 slice Ø 15.8 mm x 0.25 mm 215,00 ERM -EB508 slice Ø 15.8 mm x 0.25 mm 215,00 Special materials ERM -ED101 (BAM-S001) silicon nitride powder 50 g 260,00 ERM -ED102 boron carbide powder 100 g 255,00 ERM -ED103 boron nitride powder 50 g 270,00 BAM-S002 tungsten metal powder 100 g 210,00 BAM-S003 silicon carbide powder 50 g 210,00 BAM-S008 silicon carbide powder 50 g 210,00 BAM-S004 glass containing Cr-(VI) 50 g 155,00 pieces < 10 mm BAM-S011 niobium pentoxide powder 50 g 150,00 ERM -EB504 Pt, Pd + Rh in used car catalyst 250 g 490,00 powder ERM -EZ505 Electronic scrap, powder 200 g 265,00 BAM-H010 Pb, Br, Cd, Cr, (Hg) in ABS 100 g BAM-H010 Set (1+2+6 mm) Pure materials granular material Pb, Br, Cd, Cr, (Hg) in ABS discs Ø 40 mm x 1 mm Ø 40 mm x 2 mm Ø 40 mm x 6 mm 100,00 100,00 100,00 RS 1 SiO 2, > 99,99%, powder, mean particle size ~150µm 100 g 215,00 RS 2 Al 2 O 3, 99,76%, powder 100 g 215,00 RS 3 CaCO 3, 99,79%, powder 100 g 215,00 RS 4 Ni, 99,995%, chips, (weight 2 4 mg per chip) 100 g 215,00 RS 5 NiO, powder, 5 20 µm particle size 100 g 215,00 RS 6A MgO, powder, µm particle size 100 g 215,00 RS 6B MgO, powder, µm particle size 100 g 215,00 Seite 6 von 14
7 Environment BAM-K009 lubricating oil 7 ml 73,00 BAM-K010f diesel fuil/lubricating oil mixture (1:1) 1,5 ml 75,00 BAM-K011 mineral oil standard in n-heptane 4,5 ml 135,00 ERM -CC007a OCP in soil 103 g 175,00 ERM -CC008 (BAM-U008) PCP in soil 30 g 145,00 ERM -CC009 (BAM-U009) PCP in soil 30 g 145,00 ERM -CC010 (BAM-U010) AOX in soil 5,7 g 90,00 ERM -CC011 (BAM-U011) AOX in soil 4,2 g 90,00 ERM -CC018 contaminated sandy soil 55 g 235,00 ERM -CC020 contaminated river sediment 52 g 200,00 ERM -CD100 trace elements and PCP in wood 74 g 235,00 BAM-U013b Polycyclic aromatic hydrocarbons (PAH) in soil 77 g 200 BAM-U015b mineral oil in sediment 73 g 190 BAM-U019 PCB in soil 106 g 257,00 BAM-U021 mineral oil in soil 63 g 196,00 BAM-U022 mineral oil in sediment 38 g 196,00 BAM-U110 contaminated soil 60 g 263,00 BAM-U112a contaminated soil 55 g 235,00 BAM-U113 contaminated soil 40 g 175,00 BAM-U114 total cyanide in soil 66 g 148,00 ERM -EF213 S in petrol 19 ml 123,00 These reference materials ERM -EF211, ERM -EF212 and ERM -EF213 are sold as a set of three or individually through: LGC Promochem (UK) LGC Promochem GmbH (Germany) (ERM -EF212) phone: +44 (0) phone: +49 (0) askus@lgcpromochem.com de@lgcpromochem.com or individually from the certifying institutes at: IRMM, jrc-irmm-rm-sales@ec.europa.eu (ERM -EF211) and BAM, sales.crm@bam.de (ERM -EF213) Food ERM -BC600 Fusarium mycotoxins in wheat flour 81 g 255,00 ERM -BC720 T-2 and HT-2 toxin in oat flakes 94 g 226,00 ERM -BD272 Acrylamide in Crispbread 68 g 165,00 ERM -BD274 Acrylamide in Rusk 48 g 154,00 ERM -BD476 Ochratoxin A (OTA) in red wine 51 ml 130,00 Set: 68 g ERM -BD g ERM -BD g 265,00 BAM quality control samples (aqua regia extractable elements in soils and sediments) Sample # (raw material) grain sizes Unit issued Price BRM#03 (loamy soil) 100 µm (31 1) g 80,00 BRM#06a (mixed loamy soil) 63 µm (50 1) g 133,00 BRM#06b (mixed loamy soil) 63 µm (50 1) g 133,00 BRM#06c (mixed loamy soil) 63 µm (50 1) g 133,00 BRM#09a (fine-sandy soil) 125 µm (51 1) g 123,00 BRM#09b (fine-sandy soil) 125 µm (51 1) g 123,00 BRM#10a (river sediment) 125 µm (51 1) g 108,00 BRM#10b (river sediment) 125 µm (51 1) g 108,00 BRM#12 (mixed sandy soil) 63 µm (44 1) g 115,00 BRM#13 (mixed sandy soil) 125 µm (52 1) g 133,00 Seite 7 von 14
8 Gas mixtures 1. CRGMs The certified reference gas mixtures (CRMs) are prepared by BAM or industrial partners under mandate of BAM. Prices are available on request 2. Certification offer Certification of calibration gas mixtures prepared by customers and accepted by BAM Binary certified reference gas mixtures CRM Range of molar fraction Uncertainty level % rel Price mol/mol BAM-G010 0,05-0,5 0,5 0,01 - <0,05 0,8 BAM-G012 0,05-0,5 0,5 0,005 - <0,05 0,8 BAM-G014 0,05-0,5 0,5 BAM-G020 0,05-0,2 0,5 0,01 - <0,05 0,8 BAM-G024 0,05-0,5 0,5 BAM-G030 0,01-0,2 0,5 BAM-G039 0,01-0,2 0,5 BAM-G040 0,01-0,1 0,3 0, <0,01 0,5 0, <0,0001 BAM-G042 0,0001-0,01 0,5 BAM-G050 0,01-0,5 0,3 0, <0,01 0,5 0, <0,0001 0,5 600,00 BAM-G052 0,01-0,20 0,3 0, <0,01 0,5 BAM-G055 0,005-0,10 0,5 Seite 8 von 14
9 Binary certified reference gas mixtures CRM Stoffmengengehalt mol/mol Unsicherheitsbereich % rel. BAM-G060 0,01-0,5 0,3 0, <0,01 0,5 0, <0,0001 0,5 BAM-G062 0,0001-0,001 0,5 BAM-G070 0,001-0,01 0,5 0, <0,001 BAM-G072 0,0001-0,001 0,5 BAM-G100 0,0001-0,001 0,5 Multi component certified reference gas mixtures Price 600, ,00 650,00 350,00 CRM Unsicherheitsbereich % rel. Price BAM-G501 0,5 550,00 BAM-G510 0,5 650,00 BAM-G530 0,5 600,00 Certified reference gas mixtures for vehicle exhaust emission measurement (PTB Requirements PTB-A Requirements for measurement instruments used for analysis of exhaust from extraneous ignition engines ) CRM Price BAM-G200 BAM-G210 BAM-G ,00 BAM-G ,00 BAM-G ,00 Certified reference gas mixtures for gas calorimeters (PTB Requirements PTB-A 7.63 "Calorific value determination devices") CRM BAM-G300 (2H) BAM-G310 (2HL) BAM-G320 (2LH) BAM-G330 (2LHL) BAM-G340 (2L) BAM-G350 (2LL) BAM-G360 (3S) Price 800,00 (The "CRM-No." in parenthesis corresponds to the name used in sheet "PTB-A 7.63" by Physikalisch Technische Bundesanstalt (PTB).) Seite 9 von 14
10 Certified reference gas mixtures for process gas chromatographs (PTB Requirements PTB-A 7.63 "Calorific value determination devices") CRM Uncertainty level % rel Price BAM-G (6H) BAM-G (6L) BAM-G ,00 (L1-8K) BAM-G ,00 (L2-8K) BAM-G ,00 (H1-8K) BAM-G ,00 (H2-8K) BAM-G (11M) BAM-G (P1-11K) BAM-G (11D) BAM-G (H1-11K) BAM-G (H2-11K) BAM-G (H3-11K) BAM-G (L1-11K) BAM-G BAM-G (L2-11K) BAM-G BAM-G ,00 (16M) BAM-G (12M) BAM-G ,00 (13K) BAM-G (B-5K) BAM-G ,00 (17K) BAM-G BAM-G (9M) BAM-G (9E) BAM-G BAM-G901 0,5-0,3 (The "CRM-No." in parenthesis corresponds to the name used in sheet "PTB-A 7.63" by Physikalisch Technische Bundesanstalt (PTB).) Seite 10 von 14
11 ic materials BAM-E001 Standard reference compound according to ISO 8 mm x 181 mm x 181 mm, 94, Annex B g BAM-E002 Abrasive paper sheet according to 402 mm x 474 mm, 45,00 ISO 4649 Annex A 210 g BAM-E003 Standard reference compound according to ISO 8 mm x 181 mm x 181 mm, 133, Annex B g BAM-E004 Rubber sole sheet 3 mm x 120 mm x 345 mm, 95,00 for measuring the electrostatic charging of floor by a walking test 152 g BAM-E005 Rubber base ring by Moore according to 88 mm, 140 g 134,00 BAM-E006 BAM-E007 BAM-E008 BAM-E009 BAM-E010 BAM-E011 BAM-E012 BAM-E013 BAM-E014 BAM-E015 BAM-E016 BAM-E017 BAM-E018 BAM-E019 BAM-E020 BAM-E021 BAM-E022 BAM-E023 BAM-E024 BAM-E025 BAM-E026 BAM-E027 EN Rubber slider for the pendulum tester (Skid Resistance Test, SRT) according to EN : 2003; CEN rubber Rubber slider for the pendulum tester according to EN ISO SRE-NBR 28/PX platte DIN ISO SRE-NBR 28/SX ISO SRE-NBR 34/SX ISO SRE-HNBR/1X ISO SRE-ACM/1X ISO SRE-VMQ/1X ISO SRE-FKM/2X / ISO 6072 FKM 2 ISO 6072 NBR 1 ISO 6072 NBR 2 ISO SRE-NBR/L ISO SRE-NBR/M ISO 6072 EPDM 1 ISO 6072 HNBR 1 ISO SRE-CR/1 Rubber slider for the pendulum tester (Skid Resistance Test, SRT) according to EN :2011; slider 57 Rubber Slider Pad for the pendulum tester (SRT) according to EN : 2003; CEN rubber Rubber Slider Pad for the pendulum tester (SRT) according to EN : 2011; slider 57 Reference material for the Determination of rebound resilience according to ISO 4662 Rubber Slider for the pendulum tester according to EN 1436:2009, annex D Rubber Slider for the pendulum tester according to EN 1338:2003/AC:2006, annex I 10 mm x 25 mm x 76 mm, 35 g 10 mm x 25 mm x 32 mm, 15 g 84 g 84 g 84 g 83 g 87 g 83 g 123 g 84 g 84 g 2 mm x 181 mm x 181 mm 84 g 2 mm x 181 mm x 181 mm 84 g 2 mm x 181 mm x 181 mm 72 g 2 mm x 181 mm x 181 mm 79 g 2 mm x 181 mm x 181 mm 91 g 10 mm x 25 mm x 76 mm 35 g 6,5 mm x 25 mm x 76 mm 15 g 6,5 mm x 25 mm x 76 mm 15 g 6,3 mm x 181 mm x 181 mm 244 g 10 mm x 25 mm x 76 mm 35 g 10 mm x 25 mm x 76 mm 35 g 79,00 89,00 64,00 64,00 64,00 64,00 64,00 64,00 79,00 70,00 70,00 105,00 84,00 84,00 Seite 11 von 14
12 Test sample Preparation of test samples for measurements Set of 80 test specimens, with 204,00 set 1 according to ISO 4649 if a correspondent 16 mm diameter Test sample set 2 Test sample set 3 rubber sheet is ordered (E001 or E003) Preparation of test samples for measurements according to ISO 1817 if a correspondent rubber sheet is ordered (E008 - E021) Preparation of test samples for measurements according to ISO 37 if a correspondent rubber sheet is ordered (E008 - E021) Set of 20 test specimens, with 36.6 mm diameter 40 Set of 20 dumb-bells, type 2 40 Tribological reference test sample for the SRVÒ test machine Audi 1,9 TDI R4 cast iron Silitec M 112 V6 LaCrosse M 107 (GGL26Cr) FIAT 1,9 JTD cast iron Porsche V8 Alusil (AlSi17Cu4Mg) 20 mm x 12 mm x 5,5 mm 20 mm x 12 mm x 5,5 mm 20 mm x 12 mm x 5,5 mm 20 mm x 12 mm x 5,5 mm 20 mm x 12 mm x 5,5 mm 20 mm x 12 mm x 5,5 mm The test samples are sold by Optimol Instruments Prueftechnik GmbH, Westendstr. 125, DE Munich (Germany) Optical properties Materials with integral optical properties CRM Size of the material Price * BAM-V001 about 100mm x 100mm from 338,00 BAM-V002 about 100mm x 100mm from 416,00 Materials with spectral optical properties CRM Size of the material Price * BAM-V004/5 50 mm x 50 mm from 520,50 BAM-V mm x 50 mm from 1274,00 BAM-V mm x 50 mm from 520,00 BAM-V mm x 50 mm from 962,50 * Depending on special conditions / price available on request via klaus-peter.gruender@bam.de X-ray film step tablet Price available on request: uwe.zscherpel@bam.de Photometric and colorimetric reference materials ISO/IEC- and DIN-test charts for colour image reproduction, colour workflow and colour management The size of the material is DIN A4. The price of 1 CRM is 50,00 and of 4 CRMs is 150,00. Seite 12 von 14
13 Calibration kit spectral fluorescence standards The CRMs BAM-F001 to BAM-F005 are sold by Sigma-Aldrich Co contact: Dr. Monika Bäumle / Product Manager Biochemistry Sigma-Aldrich Production Industriestr. 25 CH-9470 Buchs SG / Switzerland Monika.Baeumle@sial.com phone: / mobile phone: Glass-based multi-emitteer fluorescence standard CRM Size of the material Price BAM-BAM-F mm x 12.5 mm x 40 mm 970 Porous reference materials BAM-PM-101 powder 10 g 163,00 BAM-PM-102 powder 10 g 163,00 BAM-P105 granular material 10 g 195,00 BAM-P106 granular material 15 g 330,00 ERM -FD107 (BAM-P107) pellets ~Ø 1,8 mm 10 g 363,00 BAM-P108 beads ~Ø 500 µm 10 g 203,00 BAM-P109 beads ~Ø µm 10 g 270,00 ERM -FD120 (BAM-PM-120) beads ~Ø 900 µm 15 g 393,00 ERM -FD121 (BAM-PM-121) beads ~Ø 55 µm 12 g 263,00 ERM -FD122 (BAM-PM-122) beads ~Ø 90 µm 10 g 213,00 ERM -FD123 (BAM-P-123) 10 mm x 20 mm 6 filter tubes 158,00 BAM-P124 9 mm x 19 mm 6 flat membranes 183,00 BAM-P125 9 mm x 19 mm 6 flat membranes 183,00 BAM-P126 9 mm x 19 mm 6 flat membranes 183,00 BAM-P127 beads ~ Ø 1 mm 10 g 415,00 BAM-P128 6 cylinders 260,00 Layer and surface reference materials Material for thin layer and surface analytical methods CRM Size of the material Price BAM-L200 10,8 mm x 4 mm x approx.5 mm 488,00 Test material and software for the performance check of an X-ray spectrometer attached to a SEM CRM Size of the material Price EDS-TM002 8 mm x 8 mm x 0,5 mm 283,00 EDS-TM002 with software (individual license) 8 mm x 8 mm x 0,5 mm 476,00 CD-ROM (in English and German) EDS-TM002 with software (multible license) CD-ROM (in English and German) 8 mm x 8 mm x 0,5 mm 7 Contact: Dr. Vasile-Dan Hodoroaba phone: fax: dan.hodoroaba@bam Seite 13 von 14
14 Particle size distribution BAM-D001 SiC powder 10 g 407,00 BAM-N001 nano silver 2 x 5 ml 217,00 Polymeric reference materials The CRMs ERM -FA001 to ERM -FA008 (BAM-P001 to BAM-P008) are produced and sold by Fa.Polymer Standards Service GmbH (PSS) Dr. Thorsten Hofe phone: +49 (0) Postfach 3368 fax: +49 (0) Mainz PSS_info@polymer.de They are distributed in packaging sizes of 1, 2, 5 and 10 g. The CRMs BAM-P011 and BAM-P012 are sold by BAM. BAM Bundesanstalt für Materialforschung und -pruefung Dr. Steffen Weidner phone: Richard-Willstaetter-Str. 11 fax: Berlin steffen.weidner@bam.de CRM Size of the material Price BAM-P011; BAM-P012 pellets 1 g 2 g 5 g 10 g 70,00 130,00 505,00 Isotopic reference materials CRM Size of the material Price ERM -AE102a 20 ml 353,00 ERM -AE103 (BAM-I003) 30 ml 353,00 ERM -AE104a 20 ml 353,00 ERM -AE ml 95,00 ERM -AE ml 95,00 ERM -AE ml 95,00 ERM -AE ml 353,00 ERM -AE ml 353,00 BAM-I012 7 ml 100 Primary pure substances CRM Form of material Size of the material BAM-Y001 compact material 0,5 g BAM-Y002 compact material 0,5 g BAM-Y003 cubes mm 0,5 g BAM-Y004 compact material 0,5 g BAM-Y005 compact material 0,5 g BAM-Y006 compact material 0,5 g BAM-Y007 compact material 0,5 g BAM-Y008 compact material 0,5 g BAM-Y009 crystalline powder 0,5 g BAM-Y010 crystalline powder 0,5 g Prices are available on request: Norbert.Jakubowski@bam.de They are available only to the signatories (National Measurement Institutes) and designated laboratories as listed in the Mutual Recognition Arrangement MRA Seite 14 von 14
Certified Reference Materials
Certified Reference Materials Catalogue 2015 Safety in technology and chemistry Our Mission As a Federal Institute for materials technology and chemical engineering we ensure ongoing safety in technology
More informationReference Materials for Environmental Performance Testing Dr Steve Wood Head of Regulatory and Legislative Services. ISPRA 25 June 2009
Reference Materials for Environmental Performance Testing Dr Steve Wood Head of Regulatory and Legislative Services ISPRA 25 June 2009 Outline Background to LGC UK MCERTS scheme Reference materials production
More informationBAM-P125 Material: Flat Membrane
Federal Institute for Materials Research and Testing CERTIFIED REFERENCE MATERIAL FOR MERCURY INTRUSION BAM-P125 Material: Flat Membrane Certified properties 250 Mercury intrusion curve between 0.12 MPa
More informationFederal Institute for Materials Research and Testing
Federal Institute for Materials Research and Testing CERTIFIED REFERENCE MATERIAL FOR THE GAS ADSORPTION BAM-PM-101 Material: SiO 2 with specific surface area (BET) of 0.177 0.004 m² g -1 Mean of means
More informationSANTE ET HYGIENE INDUSTRIELLE Health Industrial hygiene Filtres, Peinture, Amiante, Silice Filters, Paint, Asbestos, Silica
4C la Tannerie BP 30 055 St Julien-lès-Metz F - 57072 METZ Cedex 3 : 03 87 75 54 29 : 03 87 36 23 90 E-MAIL : techlab@techlab.fr WEB : www.techlab.fr MATERIAUX DE REFERENCE CERTIFIES SANTE ET HYGIENE INDUSTRIELLE
More informationConsumables Accessories
Consumables Accessories Index Lapping / Polishing Lapping plates / Polishing plates / Supporting plates.... 3 Dressing rings... 4 Pressure plates 4 Ceramic pellets. 4 Rubber pads..... 5 Felt pads.... 5
More informationPrecision Lightmeters Made in Germany
Lightmeters Luxmeters, Footcandle Meters Precision Lightmeters Made in Germany Luminance Meters www.gossen-photo.de Luxmeters / Footcandle Meters MAVOLUX 5032 C/B USB Illuminance meters of the precision
More informationSUS. Company Profile. Ulrich Nell, Feldstr.23, D - 46149 Oberhausen, Tel. 0049(0)208/658535 Fax 0049(0)208/658536
SUS Ulrich Nell, Feldstr.23, D - 46149 Oberhausen, Tel. 0049(0208/658535 Fax 0049(0208/658536 Company Profile SUS was founded in 1986 in Oberhausen in the Ruhr area (close to Düsseldorf, in order to meet
More informationAnalytical Standards and CRMs for the Petroleum Industry
Analytical Standards and CRMs for the Petroleum Industry Dr. Lisa Fitzpatrick EMEA Tactical Marketing Manager, LT&D. sigma-aldrich.com 2013 Sigma-Aldrich Co. LLC. All rights reserved. Brands and WW Product
More informationUNITED STATES CONSUMER PRODUCT SAFETY COMMISSION DIRECTORATE FOR LABORATORY SCIENCES DIVISION OF CHEMISTRY 5 RESEARCH PLACE ROCKVILLE, MD 20850
UNITED STATES CONSUMER PRODUCT SAFETY COMMISSION DIRECTORATE FOR LABORATORY SCIENCES DIVISION OF CHEMISTRY 5 RESEARCH PLACE ROCKVILLE, MD 20850 Test Method: CPSC-CH-E1001-08.2 Standard Operating Procedure
More informationRange of Certified Values in Reference Materials. Range of Expanded Uncertainties as Disseminated. Is the expanded uncertainty a relative one?
Calibration and Capabilities Amount of substance, sediments, s, Germany, (Bundesanstalt für Materialforschung und -prüfung), The uncertainty ranges given in the following CMCs may be expressed according
More informationSample preparation for X-ray fluorescence analysis
Technical articles Sample preparation for X-ray fluorescence analysis III. Pressed and loose powder methods Gakuto Takahashi* 1. Introduction There are two main sample preparation techniques for measurement
More informationCertifying Reference Materials to ISO Guide 34
Certifying Reference Materials to ISO Guide 34 Gill Holcombe Head of Reference Materials Production Environmental Laboratory Quality Day 17 November 2011 4005 Outline LGC background Quality systems - ISO
More informationThe NEW X-MET7000 Faster, lighter,
needsflexi The NEW Faster, lighter, The flexible analytical solution for a wide range of smaller and even customer longer battery life! Now with even greater flexibility to analyse what you need, where
More informationIUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS INTRODUCTION Each REACH registrant is required to file its
More informationVeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz. Quit
VeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz Quit Theory and Practice of Wear Definition In materials science, wear is the erosion of material from a solid
More informationG8 GALILEO. Innovation with Integrity. High-End Melt-extraction Analyzer. Inert Gas Method
G8 GALILEO High-End Melt-extraction Analyzer Innovation with Integrity Inert Gas Method Determination of O, N and H The market demands Metals, minerals, and inorganic compound markets demand high-quality
More informationPortable Hardness Tester
Portable Hardness Tester Large, easy to read display with backlight Highly accurate ± 4 HL Automatic correction for impact direction Converts to all common hardness scales (,,,, HS, R m ) Light weight
More informationFLUXearch User Information
FLUXearch User Information The web search engine FLUXearch helps you to find commercial available certified reference materials (CRM) for optical emission spectroscopy (OES) and x ray fluorescence analysis
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationProduct catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
More information7. Chemical Waste Disposal Procedures
7. Chemical Waste Disposal Procedures Substances that Can and Cannot be Disposed of via Sink Drains or in Regular Solid Refuse Containers 1. It is prohibited to pour down a sink or floor drain, or place
More informationNANO INDENTERS FROM MICRO STAR TECHNOLOGIES
NANO INDENTERS FROM MICRO STAR TECHNOLOGIES Micro Star makes a variety of nano indenters following defined standards or custom requested geometries and dimensions. Micro Star calibration laboratory complies
More informationData Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list
VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol
More informationThe Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
More informationModular and Flexible. We want to make it easier for you! Innovative Riveting System. with blind rivet adapter BR 20. with blind rivet adapter BR 50
Modular and Flexible Innovative Riveting System 800 bar with blind rivet adapter BR 20 We want to make it easier for you! with blind rivet adapter BR 50 Engineered and Designed by with blind rivet nut
More informationRecommendations Regarding the Handling of Norit GL 50 in Flue Gas Clean up Systems
Technical Bulletin Gas & Air Recommendations Regarding the Handling of Norit GL 50 in Flue Gas Clean up Systems 1. Introduction Norit GL 50 is a powdered activated carbon widely used for the removal of
More informationDIN V 18035-7 Sports Grounds; Part 7: Synthetic Turf Areas June 2002
INSTITUT FÜR SPORTBODENTECHNIK DIPL. ING. H.J. KOLITZUS Accredited by DIN CERTCO and IAAF September 2002 DIN V 18035-7 Sports Grounds; Part 7: Synthetic Turf Areas June 2002 Comments on the new 2002 version
More informationOIL CONDITION MONITORING: AUTOMOTIVE ANALYSIS
OIL CONDITION MONITORING: AUTOMOTIVE ANALYSIS Why Analyse Lubricants? With increasing costs and tighter deadlines, the need for effective maintenance strategies is greater than ever before. So why not
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationCATALOGUE REFERENCE MATERIALS
IPT Institute for Technological Research CATALOGUE REFERENCE MATERIALS 2014 Laboratory of Metrological References IPT s Reference Materials www.ipt.br/nmr.htm Av. Prof. Almeida Prado n0 532 Predio 31 Cidade
More informationProduct list Magnesium, Calcium and further mineral compounds
Product list Magnesium, Calcium and further mineral compounds Product list Magnesium, Calcium and further mineral compounds A Aluminium stearate Aluminium sulphate C Calcium acetate Calcium ascorbate L-Calcium
More informationFlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process
Page 1(6) Fly Me CHAIR 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods
More informationEN 14904. Export Manager Pulastic Sports Surfaces The Netherlands www.descol.nl
Introduction by : Peter Minnée Export Manager Pulastic Sports Surfaces The Netherlands www.descol.nl Co-operation between European test institutes and standardization institutes formalized in 1961 Construction
More informationTest equipment for temperature and its reduction
Data sheet 90.2721 Page 1/6 Test equipment for temperature and its reduction Pt100 precision RTD temperature probe Calibrated temperature measuring chain with precision display device Calibrations as service
More informationHMHF DIRECT DRIVE BELT DRIVE. Manufactured by UDY Corporation. Cyclone Models Available:
Cyclone Models Available: HMHF DIRECT DRIVE BELT DRIVE INITIAL PARTICLE SIZE: MATERIALS MILLABLE: PARTICLE SIZE GENERATED: SAMPLE FEED INTO THE MILL: SAMPLE MILL GRINDING CHAMBER: GRINDING RATE AND COLLECTION
More informationLasline, Nitrocut, Oxycut gases for laser cutting, Expertise that gets right to the point
Lasline, Nitrocut, Oxycut gases for laser cutting, Expertise that gets right to the point Laser technology high-tech that has made its mark Increasing demands on productivity, costeffectiveness and quality
More informationEXAMPLE EXERCISE 4.1 Change of Physical State
EXAMPLE EXERCISE 4.1 Change of Physical State State the term that applies to each of the following changes of physical state: (a) Snow changes from a solid to a liquid. (b) Gasoline changes from a liquid
More informationHow to read your Oil Analysis Report
How to read your Oil Analysis Report A better understanding Petroleum Technologies Group, LLC. 4665 Broadmoor S.E. Ste#15 Grand Rapids, MI 49512 Phone # 616/698 9399 Fax # 616/698 9395 www.oil lab.com
More informationLonger lifetime for hydraulic oil
Longer lifetime for hydraulic oil In many applications hydraulic oils and lubricating oils are exchanged with new oil after only some thousand hours of operation. Changing the oil causes high costs and
More informationForm and content of COOMET сertificate for reference materials for composition and properties of substances and materials
COOMET Recommendation Form and content of COOMET сertificate for reference materials for composition and properties of substances and materials CООМЕТ R/RM/22:2013 Agreed at the 17 th meeting of COOMET
More informationSCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
More informationThermal diffusivity and conductivity - an introduction to theory and practice
Thermal diffusivity and conductivity - an introduction to theory and practice Utrecht, 02 October 2014 Dr. Hans-W. Marx Linseis Messgeräte GmbH Vielitzer Str. 43 D-95100 Selb / GERMANY www.linseis.com
More informationsince1798 www.lupriflex.com Collection 2014-2015 ... WALKING SAFELY... Phone: +49 2364-9267-0
since1798 www.lupriflex.com Collection 2014-2015... WALKING SAFELY... Phone: +49 2364-9267-0 ... WALKING SAFELY... The company L. Priebs GmbH & Co. KG Our family-owned company established in 1798 has the
More informationExercise 3.5 - Naming Binary Covalent Compounds:
Chapter Exercise Key 1 Chapter Exercise Key Exercise.1 Classifying Compounds: Classify each of the following substances as either a molecular compound or an ionic compound. a. formaldehyde, CH 2 O (used
More informationProject No. (FKZ) 3707 61 301/05 UBA-FB 001337. Summary. by Dr. Sonja Martens Dr. Bernd Eggers Thorsten Evertz Golder Associates GmbH, Celle
TEXTE 34/2010 ENVIRONMENTAL RESEARCH OF THE FEDERAL MINISTRY OF THE ENVIRONMENT, NATURE CONSERVATION AND NUCLEAR SAFETY Project No. (FKZ) 3707 61 301/05 UBA-FB 001337 Applications of Nanomaterials in Environmental
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationXFA 600 Thermal Diffusivity Thermal Conductivity
XFA 600 Thermal Diffusivity Thermal Conductivity Thermal Diffusivity, Thermal Conductivity Information of the thermo physical properties of materials and heat transfer optimization of final products is
More informationPinta EQ Environmental impact assessment MRK/ 4-5-2010 Page 1(6) 2 Description and assessment of the Production process
Page 1(6) Pinta EQ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods
More informationSurface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
More informationFinal Report. New No. Continue with amended wording (expiry date 31 July 2014 except for
1 Executive Summary On the basis of the Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment ( RoHS Directive ) the European Commission
More informationGold Refining and Coin Manufacturing at the Royal Canadian Mint
INTERNET Sub title will go here The Application of XRF to Gold Refining and Coin Manufacturing at the Royal Canadian Mint Michael W. Hinds, Ph.D. The Business of the Mint Circulation Coins (Canada & Other
More informationDetermination of the enthalpy of combustion using a bomb calorimeter TEC
Determination of the enthalpy of TEC Related concepts First law of thermodynamics, Hess s law of constant heat summation, enthalpy of combustion, enthalpy of formation, heat capacity. Principle The bomb
More informationMaterial test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
More informationMobil Antifreeze Advanced
Mobil Antifreeze Advanced Concentrated antifreeze formula. Helps prevent winter freezing and summer overheating. Organic Acid Technology (OAT) formula offers excellent protection for aluminum engines.
More informationAluminium as Construction Material in Ammonia Refrigeration Cycles
Aluminium as Construction Material in Ammonia Refrigeration Cycles Experiences With Aluminium Compared to other metals, aluminium has only a brief history as an engineering material. While, about 150 years
More informationThe ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
More informationCORESTA RECOMMENDED METHOD Nº 81
CORESTA RECOMMENDED METHOD Nº 81 ROUTINE ANALYTICAL MACHINE FOR E-CIGARETTE AEROSOL GENERATION AND COLLECTION DEFINITIONS AND STANDARD CONDITIONS (June 2015) 0. INTRODUCTION This Method includes the requirements
More informationExperiment 12- Classification of Matter Experiment
Experiment 12- Classification of Matter Experiment Matter can be classified into two groups: mixtures and pure substances. Mixtures are the most common form of matter and consist of mixtures of pure substances.
More informationThe laboratory fulfils the requirements for periodic emission measurement according to ČSN P CEN/TS 15675:2009
Page 1 of 8 Testing laboratory working site: Working place 1: Technické služby ochrany ovzduší Praha a.s. Testing Laboratory for Measuring Pollutants, Jenečská 146/44, 161 00 Praha Working place 3: Organizational
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationMixtures and Pure Substances
Unit 2 Mixtures and Pure Substances Matter can be classified into two groups: mixtures and pure substances. Mixtures are the most common form of matter and consist of mixtures of pure substances. They
More informationSCP SCIENCE www.scpscience.com. Certified Reference Materials. Materials
Certified Reference 47 EnviroMAT and AgroMAT Certifi ed Reference (CRMs) are designed to complement existing Performance Evaluation Programs in environmental and agricultural analysis. EnviroMAT CRMs allow
More informationCertificate of Analysis
The Japan Society for Analytical Chemistry Certificate of Analysis Certified Reference Material JSAC 0602-3 Plastics (tip form) for Chemical Analysis of Hazardous Metals This certified reference material
More informationCONSTANT HEAD AND FALLING HEAD PERMEABILITY TEST
CONSTANT HEAD AND FALLING HEAD PERMEABILITY TEST 1 Permeability is a measure of the ease in which water can flow through a soil volume. It is one of the most important geotechnical parameters. However,
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationPART 6 SPECIAL CONTRACT RULES FOR METALS CONTENTS
PART 6 SPECIAL CONTRACT RULES FOR METALS * CONTENTS Contracts Page High Grade Primary Aluminium 6-1 Aluminium Alloy 6-5 Copper - Grade A 6-11 Standard Lead 6-13 Primary Nickel 6-15 North American Special
More informationPA 1101 & PA 1102 black Impact-Resistant Plastic Materials Flexible, Chemical- Resistant and Made from Renewable Raw Materials.
EOS Materials Plug housing from ATI Accurate Technologies PA 1101 & PA 1102 black Impact-Resistant Plastic Materials Flexible, Chemical- Resistant and Made from Renewable Raw Materials PA 1101 & PA 1102
More informationGx Tubing. High-quality Gx Glass Tubing for pharmaceutical packaging. Tubular Glass
Gx Tubing High-quality Gx Glass Tubing for pharmaceutical packaging In its two tubing production sites in Pisa (Italy) and Vineland, NJ (USA), Gerresheimer produces clear and amber borosilicate glass tubing
More informationRestoration of contaminated Elbe River floodplain soils by phytoremediation
Restoration of contaminated Elbe River floodplain soils by phytoremediation R. Meissner, S. Bolze, H. Rupp- Helmholtz Centre for Environmental Research - UFZ C. Baum, D. Zimmer, P. Leinweber University
More informationEXPERIMENT 10 CONSTANT HEAD METHOD
EXPERIMENT 10 PERMEABILITY (HYDRAULIC CONDUCTIVITY) TEST CONSTANT HEAD METHOD 106 Purpose: The purpose of this test is to determine the permeability (hydraulic conductivity) of a sandy soil by the constant
More information100% ionic compounds do not exist but predominantly ionic compounds are formed when metals combine with non-metals.
2.21 Ionic Bonding 100% ionic compounds do not exist but predominantly ionic compounds are formed when metals combine with non-metals. Forming ions Metal atoms lose electrons to form +ve ions. Non-metal
More informationFractional Distillation and Gas Chromatography
Fractional Distillation and Gas Chromatography Background Distillation The previous lab used distillation to separate a mixture of hexane and toluene based on a difference in boiling points. Hexane boils
More informationLABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO
LABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO STANDARD IS: 2720 (Part 16) 1979. DEFINITION California bearing ratio is the ratio of force per unit area required to penetrate in to a soil mass with
More informationPre-Filtration for Ultimate Cleanliness and Efficiency: HYDAC Diesel PreCare. Dual function: Diesel filtration + Water removal
Pre-Filtration for Ultimate Cleanliness and Efficiency: HYDAC Diesel PreCare. Dual function: Diesel filtration + removal Diesel PreCare: The Clear Link Guaranteed HYDAC quality thanks to HYDAC Quality
More informationCATALOGUE OF PRODUCTS
Sklopísek Střeleč, joint stock company produces high quality glass, foundry, technical, filtration and sport sands, fine milled silica flour. The Střeleč area represents the largest deposit of prime quality
More informationSpecial coating Corrotect. Anti-corrosion protection for rolling bearings and precision components
Special coating Corrotect Anti-corrosion protection for rolling bearings and precision components Special coating Corrotect Features Basic data on the Corrotect coating Rust is public enemy number 1 for
More informationREALISATION OF THE PLANNED BLACK BOXES IN THE HUNGARIAN NATIONAL MUSEUM
7 Abstract REALISATION OF THE PLANNED BLACK BOXES IN THE HUNGARIAN NATIONAL MUSEUM KRISZTINA DÚZS Hungarian National Museum, Budapest, Hungary Email: kriszta.duzs@ace.hu In the framework of the Ancient
More informationSTRAIN GAGE INSTALLATION HOLE DRILLING
Via Delle Calandre 63 50041 Calenzano (Florence) Italy Tel: +39.055.8826-302 Fax: -303 www.sintechnology.com info@sintechnology.com STRAIN GAGE INSTALLATION HOLE DRILLING How to install strain gages for
More informationPortable digital microprocessor thermometers with interchangeable probes
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationEngineering Your Competitive Edge. Applications of Kennametal mill rolls
Engineering Your Competitive Edge of Kennametal mill rolls Tungsten carbide is a proven material for many stands in the rolling mill industry. Tungsten carbide grades developed by KENNAMETAL EPG achieve
More informationHolcim EMR List of EN Standards and VDI Guidelines usable for Discontinuous Measurements in Cement Plants
Holcim EMR List of EN Standards and VDI Guidelines usable for Discontinuous Measurements in Cement Plants Version 2004-01 / August 2004 (HGRS-JW-04-25s) HGRS-CTS/MT J. Waltisberg SUMMARY ( ) shall not
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationSelf-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
More information1 Description and assessment of the Materials used in the Product. 3 Description and assessment of the Surface Treatment Methods
Kimmo Sundström page 1 of 6 James mesh back Environmental impact assessment 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description
More informationForm 0.5 chair, 2805 and 2806
Page 1(8) Form 0.5 chair, 2805 and 2806 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface
More informationCosts of air pollution from European industrial facilities 2008 2012 an updated assessment
Costs of air pollution from European industrial facilities 2008 2012 an updated assessment Summary In 2012, air pollution from European industrial facilities cost at least EUR 59 billion (and up to EUR
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationMetals and Non-metals. Comparison of physical properties of metals and non metals
Metals and Non-metals Comparison of physical properties of metals and non metals PHYSICAL PROPERTY METALS NON-METALS Physical State Metallic lustre (having a shining surface) Mostly solids (Liquid -mercury)
More informationPneumatic Tires. Specialist Tires for Maximum Efficiency
Pneumatic Tires Specialist Tires for Maximum Efficiency Radial Pneumatic Tires from Continental Continental Industrial Pneumatic Tires provide comfort on all surfaces and therefore offer the protection
More informationSCH 4C1 Unit 2 Problem Set Questions taken from Frank Mustoe et all, "Chemistry 11", McGraw-Hill Ryerson, 2001
SCH 4C1 Unit 2 Problem Set Questions taken from Frank Mustoe et all, "Chemistry 11", McGraw-Hill Ryerson, 2001 1. A small pin contains 0.0178 mol of iron. How many atoms of iron are in the pin? 2. A sample
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationPortable X-ray fluorescence Spectroscopy. Michael A. Wilson Research Soil Scientist USDA-NRCS National Soil Survey Center Lincoln, NE
Portable X-ray fluorescence Spectroscopy Michael A. Wilson Research Soil Scientist USDA-NRCS National Soil Survey Center Lincoln, NE OBJECTIVES Background of the method Features of the instrument Applications
More informationTIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings.
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationVICKERS HARDNESS TESTER. HBS HBW Kc
ICKERS HARDNESS TESTER H HK HBS HBW Kc Clean Touch Panel coordinated with highly integrated PC board. Measuring procedures, conditions and data are displayed clearly. (F-800 Series) Accurate light load
More informationP O L Y T E C R.M. S.R.L.
INFORMACIÓN FUENTES EXCEPTUADAS PARA ENSEÑANZA RSS-2 G-M Resolving Time Set This set is used for determining the resolving time of GM Counters. It consists of three half discs, two of which contain 5 microcuries
More informationMachbarkeitsstudie zu geeigneten Kandidaten für f r die Herstellung von CRM für r die Bestimmung von Wasserstoff in Festkörpern
BAM mission: Safety in technology and chemistry Machbarkeitsstudie zu geeigneten Kandidaten für f r die erstellung von CRM für r die Bestimmung von Wasserstoff in Festkörpern V.-D. odoroaba, a D. Klemm,
More information