Industrial: Flare Fittings
|
|
- Clare Cummings
- 8 years ago
- Views:
Transcription
1 Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea Cap achined to ARI Standards Tefon Sea on Vave core
2 Industria: Fare Fittings 48F ae Connector 145F Branch Tee 149F-249F ae Ebow 151F Run Tee 159F-259F 45 ae Ebow 256F Adapter Tee Fare to ae PT p. H7 p. H8 p. H8 p. H9 p. H9 p. H10 48IFH ae Connector 245IFH Branch Tee 249IFH-249IF ae Ebow 251IFH Run Tee 259IFH 45 ae Ebow AVU1 ae Connector AVE1 ae Ebow p. H12 p. H13 p. H13 p. H13 p. H13 p. H15 p. H15 AVT3 Run Tee AVC1 Cross Fare to Straight Thread 485F ae Connector 1495F ae Ebow 1595F 45 ae Ebow AVUIFI ae Connector p. H15 p. H15 p. H7 p. H9 p. H10 p. H15 Fare to etric Straight Thread 48F-X-IX ae Connector 149F-X-IX ae Ebow 159F-X-IX 45 ae Ebow Fare to Soder US5 Fare Adapter 43F Connector p. H7 p. H9 p. H10 p. H5 p. H6 AVUSE Extended Copper Tube AVTS Soder Tee AVTS Extended Soder Tee AVUS3 3 Way Soder AVUS Soder Connector Fare to Femae PT 46F Femae Connector p. H15 p. H15 p. H15 p. H16 p. H16 p. H7 150F Femae Ebow 166FSV Swive Ebow 46IFH Femae Connector 250IFH Femae Ebow 252IFH Branch Tee 14FSV Swive ut Connector Fare to Fare p. H9 p. H10 p. H12 p. H13 p. H13 p. H5 42F Union 144F-244F Union Tee 147F Cross 155F Union Ebow 660FH Union 42IFH Union 244IFH Union Tee p. H6 p. H8 p. H8 p. H9 p. H10 p. H12 p. H12 255IFH Branch Tee AVU2 Union AVT2 Union Tee AVCS4 Cross AVUR3 Femae Connector AVUS4 Swive Connector AVTS4 Run Tee p. H13 p. H15 p. H15 p. H16 p. H16 p. H16 p. H16 H2 Otsego, ichigan
3 Industria: Fare Fittings AVTS6 Branch Tee AVU2BH Bukhead Union AVUS3BH Bukhead Union 1F Refrigerant rum 661FH Reducer Bukhead Union Adapter p. H16 p. H15 p. H15 p. H5 p. H10 664FH Femae Fare - Pipe 88AC Refrigerant Adapter 880AC Refrigerant Adapter 881AC Refrigerant Adapter 2GF Fare Gasket 3GF Sea Bonnet Auxiiary Component p. H10 p. H16 p. H16 p. H16 p. H5 p. H5 14F ong forged ut 14FSX Short Forged ut 41F ong ut 41FS Short ut 639F Sea Pug 640F Cap ut 41IF Inverted Fare ut p. H5 p. H5 p. H6 p. H6 p. H10 p. H10 p. H12 41IFS Inverted Fare ut Stee 41IFF Inverted Fare Pioted ut 640QSF Sea Cap 640QSFCR Sea Cap with Core Remover CR Core Remover VC Vave Core p. H12 p. H12 p. H16 p. H16 p. H16 p. H16 H3 Otsego, ichigan
4 45 Fare Fittings aterias of Construction bodies: uts: o-rings: Brass Brass viton omencature Exampe: 149f (2) 49 F Attribute: FORGIG (1) EXTRUSIO (2) FARE TO EXTERA PIPE, 90 ebow FARE FITTIG 6 3/8 o.d.. 4 1/4 Appicabe Tube Tube ateria: Tube O..: Copper, brass, auminum, weded stee hydrauic tubing that can be fared. 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 PSI Temperature Range Pressure range Tube O.. (in.) Specifications From -65 to +250 F Tube Wa (in.) / / / / / / / /4.035 Economica fitting that resists mechanica puout. Can be assembed and disassembed repeatedy. isted with Underwriter s aboratories for fammabe iquid, marine and gas appications. eets functiona requirements of SAE J512 and J513. Assemby Instructions 1. Cut tubing squarey and cean end thoroughy to remove burrs. 2. Pace nut onto. Pace ed end of nut toward end of. 3. Fare end with faring too to provide 45 fare. 4. Camp fare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additiona 1/4 to 1/2 turn past finger tight for a meta-to-meta sea. Fare fittings are easy to disassembe and may be reassembed repeatedy, for a eak-proof connection. Operating Fuid: ote: Water, air, inert and non-combustibe gasses, fammabe iquid, Freon, For other types of fuid or gasses, pease consut factory H4 Otsego, ichigan
5 45 Fare Fittings Refrigerant rum Adapter 1F Ref. SAE O.. 1F-4-8 1/4 1/2 1-1/ F-4-12* 1/4 3/4 1-1/ F-6-12* 3/8 3/4 1-1/ F-8-12* 1/2 3/4 1-1/ Gasket Furnished with each 1F adapter Short Forged ut 14FSX Ref. SAE d 14FSX-4 1/4 7/ / FSX-5 5/16 1/ / FSX-6 3/8 5/ / FSX-8 1/2 3/ / FSX-10 5/8 7/ / FSX-12 3/4 1-1/ / Copper Fare Gasket 2GF Ref. SAE a 2GF-3 3/ GF-4 1/4.36 2GF-5 5/ GF-6 3/8.56 2GF-8 1/2.67 2GF-10 5/8.78 2GF-12 3/4.97 A Short Forged Reducing uts 14FS d 14FS-6-4 3/8 to 1/4 5/ / FS-8-6 1/2 to 3/8 3/ / FS /8 to 1/2 7/ / Sea Bonnet 3GF Ref. SAE a 3GF-3 3/ GF-4 1/4.37 3GF-5 5/ GF-6 3/8.56 3GF-8 1/2.67 3GF-10 5/ A Swive ut Vave Connector 14FSV Ref. SAE in. 14FSV-4 1/4 7/ / FSV-6 3/8 5/ / FSV-8 1/2 3/ / FSV-10 5/8 7/ / GF-12 3/4.97 C Hex ong Forged ut 14F Ref. SAE d 14F-4 1/4 7/ / F-6 3/8 5/ / F-8 1/2 3/ / Fare Adapter US5 US5-4 1/4 7/ / US5-6 3/8 5/ / US5-8 1/2 3/ / US5-10 5/8 7/ / F-10 5/8 7/ / H5 Otsego, ichigan
6 45 Fare Fittings ong ut 41F Ref. SAE d 41F-2 1/8 5/ / F-3 3/16 3/8-24 7/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ / F-12 3/4 1-1/ / Union 42F Ref. SAE *Thread Protectors 42F-2 1/8 5/ / F-3 3/16 3/8-24 3/ F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ F-12* 3/4 1-1/ / F-14* 7/8 1-1/ / Short ut 41FS / Shorter ut 41FX Ref. SAE d 41FS-2 1/8 5/ / FS-3 3/16 3/8-24 7/ FS-4 1/4 7/ / FS-5 5/16 1/2-20 5/ FS-6 3/8 5/8-18 3/ FX-6 3/8 5/8-18 3/ FS-8 1/2 3/4-16 7/ FX-8 1/2 3/4-16 7/ FS-10 5/8 7/ / FX-10 5/8 7/ / FX-12 3/4 1-1/ / FS-12 3/4 1-1/ / FS-14 7/8 1-1/ / Union Reducers 42F Ref. SAE Fare to Soder 43F Ref. SAE c hex dia. d1 dia. d2 42F-6-4 1/4 3/8 7/ /8-18 5/ F-6-5 5/16 3/8 1/2-20 5/8-18 5/ F-8-4 1/4 1/2 7/ /4-16 3/ F-8-6 3/8 1/2 5/8-18 3/4-16 3/ F /8 5/8 5/8-18 7/8-14 7/ F /2 5/8 3/4-16 7/8-14 7/ SOER O dia. 43F-4-4 1/4 1/4 7/ / F-4-5 1/4 5/16 7/ / F-4-6 1/4 3/8 7/ / F-6-4 3/8 1/4 5/8-18 5/ F-6-5 3/8 5/16 5/8-18 5/ F-6-6 3/8 3/8 5/8-18 5/ F-6-8 3/8 1/2 5/8-18 5/ F /8 5/8 5/8-18 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 3/ F /2 5/8 3/4-16 3/ F /8 1/2 7/8-14 7/ F /8 5/8 7/8-14 7/ F-10-12* 5/8 3/4 7/8-14 7/ F-12-12* 3/4 3/4 1-1/ / F-12-14* 3/4 7/8 1-1/ / *Comes standard with protectors H6 Otsego, ichigan
7 45 Fare Fittings Femae Connector 46F Ref. SAE F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-5-2 5/16 1/8 1/2-20 9/ F-5-4 5/16 1/4 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/ / F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/ F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/ / F-8-8 1/2 1/2 3/ F-8-12* 1/2 3/4 3/ / F /8 3/8 7/8-14 7/ F /8 1/2 7/ F-10-12* 5/8 3/4 7/ / ae Connector 48F Ref. SAE F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 7/ F-3-4 3/16 1/4 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-4-8 1/4 1/2 7/ / F-5-2 5/16 1/8 1/2-20 1/ F-5-4 5/16 1/4 1/2-20 9/ F-5-6 5/16 3/8 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/8-18 5/ F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/8-18 7/ F-6-12* 3/8 3/4 5/ / F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 7/ F /2 3/4 3/ / F /8 1/4 7/8-14 7/ F /8 3/8 7/8-14 7/ F /8 1/2 7/8-14 7/ F-10-12* 5/8 3/4 7/ / F-12-8* 3/4 1/2 1-1/ / F-12-12* 3/4 3/4 1-1/ / F-14-12* 7/8 3/4 1-1/ / Fare to etric Adaptor 48F-X-IX Hex Part umber etric Thread HEX 48F-8-II6 1/2 16 X 1.5 3/4-16 7/ F-10-I27 5/8 27 x 2.0 7/ / F-12-I27* 3/4 27 x / / ote: Fuorocarbon o-ring is standard *Comes standard with protectors Fare to SAE Straight Thread 485F PART O. TUBE SIZE STRAIGHT THREA STRAIGHT HEX Fuorocarbon O-Ring Hex FOW IA. 485F-12-8* 3/4 3/ / / F-12-12* 3/4 1 1/ / / H7 Otsego, ichigan
8 45 Fare Fittings 144F 149F Union Tee 144F-244F Ref. SAE ae Branch Tee 145F Ref. SAE m n 145F-2-2 1/8 1/8 5/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ m 144F-3 3/16 3/ F-4 1/4 7/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ F-8 1/2 3/ F-10 5/8 7/ Union Tee 144F combination s F m m F /8 3/8 1/ F /2 1/2 3/ ae Ebow 149F-249F Ref. SAE F m n 149F-2-2 1/8 1/8 5/ F-3-2 3/16 1/8 3/ F-3-2 3/16 1/8 3/ F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-4-6 1/4 3/8 7/ F-4-6 1/4 3/8 7/ F-4-8 1/4 1/2 7/ F-5-2 5/16 1/8 1/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F-5-4 5/16 1/4 1/ F-5-6 5/16 3/8 1/ F /8 1/8 5/ F /8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-6-8 3/8 1/2 5/ F-6-12* 3/8 3/4 5/ F /2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F-8-8 1/2 1/2 3/ F-8-12* 1/2 3/4 3/ F /8 1/4 7/ F /8 3/8 7/ F /8 1/2 7/ F /8 1/2 7/ F-10-12* 5/8 3/4 7/ Cross 147F Ref. SAE F-12-8* + 3/4 1/2 1-1/ F-12-12* 3/4 3/4 1-1/ F-14-12* 7/8 3/4 1-1/ m + For these parts the through hoe is smaer than the through hoe on the fare end. 147F-6 3/8 5/ *Comes standard with protectors H8 Otsego, ichigan
9 45 Fare Fittings Fare Ebow to SAE etric Straight Thread 149F-X-IX Part umber Tube Size etric Thread 1 m n 1 149F-10-I27 5/8 27 x 2.0 7/ ote: Fuorocarbon o-ring is standard Union Ebow 155F Ref. SAE m 155F-2 1/8 5/ F-3 3/16 3/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ Fare Ebow to SAE Straight Thread 1495F PART O. TUBE SIZE STRAIGHT THREA HEX Hex FOW IA. 1495F-12-8* 3/4 3/ / / F-12-12* 3/4 1-1/ / / F-8 1/2 3/ F-10 5/8 7/ F-12* 3/4 1-1/ F ote: Fuorocarbon o-ring is standard Femae Ebow 150F Ref. SAE m n fow 45 Ebow 159F-259F Ref. SAE F 150F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-6 3//8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /2 3/4 3/ F-10-8* 5/8 1/2 7/ F-10-12* 5/8 3/4 7/ m n 159F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F /8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F /2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ ae Run Tee 151F Ref. SAE m n 159F-8-8 1/2 1/2 3/ F /8 3/8 7/ F /8 1/2 7/ F-12-8* + 3/4 1/2 1-1/ F-4-2 1/4 1/8 7/ For these parts the through hoe is smaer than the through hoe on the fare end. 151F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ *Comes standard with protectors H9 Otsego, ichigan
10 45 Fare Fittings 45 Fare Ebow to SAE etric Straight Thread 159F-X-IX Part umber TUBE SIZE etric Thread STRAIGHT THREA HEX 159F-8-II6 1/2 16 X 1.5 3/ mm F-10-I27 5/8 27 x 2.0 7/ / ote: Fuorocarbon o-ring is standard Hex Cap ut 640F Ref. SAE F-3 3/16 3/8-24 1/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ / Fare to SAE Straight Thread 1595F PART O. TUBE SIZE STRAIGHT THREA STRAIGHT THREA HEX FOW IA. 1595F-8-8 1/2 3/4-16 3/4-16 7/ F-12-8* 3/4 3/ / / F-12-12* 3/4 1 1/ / / ote: Fuorocarbon o-ring is standard Hex Fared Union Femae Fare to Femae Fare 660FH Ref. SAE FH-4 1/4 7/ / FH-6 3/8 5/ / FH-8 1/2 3/ / fhd-10 5/8 7/ / Swive Ebow 166FSV m n C Hex 166FSV-4-4 1/4 7/ / FSV-6-6 3/8 5/8-18 3/ ae Fare to Femae Fare 661FH Ref. SAE FSV-8-8 1/2 3/4-16 7/ FSV /8 7/ FSV-12-12* 3/4 1-1/ / dia. d 661FH-4-6 1/4 3/8 7/ / / FH-4-8 1/4 1/2 7/ / / FH-6-4 3/8 1/4 5/8-18 7/ / FH-6-8 3/8 1/2 5/8-18 3/ / FH-8-6 1/2 3/8 3/4-16 5/ / Adapter Tee 256F m n n1 661FH /2 5/8 3/4-16 7/ / FH /8 1/2 7/8-14 3/ / fhd-10-12* 5/8 3/4 7/ / / F-4-2 1/4 1/8 7/ fhd-12-10* 3/4 5/8 1-1/ / / Fared Sea Pug 639F Ref. SAE F-4 1/4 7/ /16.69 Femae Fare to ae Pipe Thread 664FH Ref. SAE F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ FH-4-2 1/4 1/8 7/ / FH-4-4 1/4 1/4 7/ / FH-6-4 3/8 1/4 5/ / FH-8-6 1/2 3/8 3/ / *Comes standard with protectors Shoud be used with 2GF fare gasket H10 Otsego, ichigan
11 Inverted Fared Fittings aterias of Construction Fittings: uts: Brass Brass and Zinc Chromate Stee omencature Exampe: 48ifhd-4-2 Attribute: 48 haf union if hd inverted fare heavy duty 6 3/8 o.d.. 4 1/4 Appicabe Tube Tube ateria: Tube O..: Copper, brass, auminum, weded stee hydrauic tubing that can be fared. 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 Pressure range PSI Temperature Range Tube O.. (in.) Specifications From -65 to +250 F Tube Wa (in.) / / / / / / / /4.035 Buit to resist mechanica puout this fitting can be assembed and disassembed repeatedy. isted with Underwriter s aboratories for fammabe iquid and gas. eets functiona requirements of SAE J512. Assemby Instructions 1. Cut tubing squarey and cean end thoroughy to remove burrs. 2. Pace nut onto. Pace ed end of nut toward end of. 3. On thin wa copper, weded or brazed tubing, use doube fare to prevent pinch-off or cracked fares. 4. Camp fare between nut and fare seat of body by screwing nut on finger-tight. Tighten with a wrench an additiona 1/4 turn for a meta-to-meta sea. ote: The seat dimensions are predicated on practica ing imitations and use of these fittings with doube fared tubing. Operating Fuid: ote: Water, Air, Inert and non-combustibe gasses compatibe with materias of construction For other types of fuids or gasses, pease consut factory H11 Otsego, ichigan
12 Inverted Fared Fittings ut 41IF Ref. SAE Part o. c hex d 41IF-2 1/8 5/ / IF-3 3/16 3/8-24 3/ IF-4 1/4 7/ / IF-5 5/16 1/2-20 1/ IF-6 3/8 5/8-18 5/ IF-8 1/2 3/4-18 3/ Femae Connector 46IFH Ref. SAE Part o. c hex 46IFH-3-2 3/16 1/8 3/8-24 1/ IFH-4-2 1/4 1/8 7/ / IFH-5-2 5/16 1/8 1/ / IFH-6-4 3/8 1/4 5/8-18 3/ IFH-8-6 1/2 3/8 3/ / Stee ut Zinc Chromate 41IFS Ref. SAE d 41IFS-3 3/16 3/8-24 3/ IFS-4 1/4 7/ / IFS-5 5/16 1/2-20 1/ IFS-6 3/8 5/8-18 5/ IFS-8 1/2 3/4-18 3/ IFS-10 5/8 7/8-18 7/ IFS-12 3/4 1-1/ / ae Connector 48IFH Ref. SAE IFH-2-2 1/8 1/8 5/ / IFH-3-2 3/16 1/8 3/ / IFH-4-2 1/4 1/8 7/ / IFH-4-4 1/4 1/4 7/ / IFH-5-2 5/16 1/8 1/ / IFH-5-4 5/16 1/4 1/ / IFH-6-2 3/8 1/8 5/8-18 3/ IFH-6-4 3/8 1/4 5/8-18 3/ IFH-6-6 3/8 3/8 5/8-18 3/ IFH-8-4 1/2 1/4 3/ / IFH-8-6 1/2 3/8 3/ / Pioted ut 41IFF for Singe Fared Tubing Ref. SAE IFH-8-8 1/2 1/2 3/ / IFH /8 1/2 7/ / IFH /4 3/4 1-1/ / d 41IFF-2 1/8 5/ / IFF-3 3/16 3/8-24 3/ IFF-4 1/4 7/ / IFF-5 5/16 1/2-20 1/ IFF-6 3/8 5/8-18 5/ IFF-8 1/2 3/4-18 3/ Union Tee 244IFH Ref. SAE IFH-3 3/16 3/ IFH-4 1/4 7/ Union 42IFH Ref. SAE IFH-5 5/16 1/ IFH-6 3/8 5/ IFH-8* 1/2 3/ *oes not meet U or SAE. 42IFH-2 1/8 5/ / IFH-3 3/16 3/ / IFH-4 1/4 7/ / IFH-5 5/16 1/ / IFH-6 3/8 5/8-18 3/ IFH-8 1/2 3/ / H12 Otsego, ichigan
13 Inverted Fared Fittings ae Branch Tee 245IFH Ref. SAE IFH-4-2 1/4 1/8 7/ IFH-6-4 3/8 1/4 5/ Femae Ebow 250IFH Ref. SAE m n 250IFH-3-2 3/16 1/8 3/ IFH-4-2 1/4 1/8 7/ IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ ae Ebow 249IFH 249IF Ref. SAE ae Run Tee 251IFH Ref. SAE m m1 n 249IFH-2-2 1/8 1/8 5/ IFH-3-2 3/16 1/8 3/ IFH-4-2 1/4 1/8 7/ IFH-3-2 3/16 1/8 3/ IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ IFH-4-4 1/4 1/4 7/ IFH-5-4 5/16 1/4 1/ IFH-6-2 3/8 1/8 5/ IF-6-4 3/8 1/4 5/ IFH-6-4 3/8 1/4 5/ IFH-6-6 3/8 3/8 5/ IFH-8-4 1/2 1/4 3/ IF /2 3/8 3/ IFH-8-6 1/2 3/8 3/ IFH-8-8 1/2 1/2 3/ Femae Branch Tee 252IFH Ref. SAE m n 252IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ IFH /8 3/8 7/ IFH /8 1/2 7/ ight uty Series Union Ebow 255IFH m 255IFH-4 1/4 7/ Ebow 259IFH Ref. SAE IFH-3-2 3/16 1/8 3/ / IFH-4-2 1/4 1/8 7/ / IFH-5-2 5/16 1/8 1/2-20 5/ IFH-5-4 5/16 1/4 1/2-20 5/ IFH-6-4* 3/8 1/4 5/ / IFH-8-6 1/2 3/8 3/4-18 7/ IFH /8 1/2 7/ / *oes not meet sae or u H13 Otsego, ichigan
14 Access Vaves aterias of Construction Straight Bodies: Shape Bodies: CA360, CA345 CA377 omencature Exampe: XAVT1-2 X AV T1 Attribute: packaged Access Vave ae Branch Tee -2 1/8 Pipe Thread Specifications Pressure range: Temperature Ranges: Operating Fuid: Up to 500 PSI -20 to +220 F Forocarbon refrigerants Vave Core: eets ARI standard 720 esigned to offer convenient ow cost access ports for refrigeration service. A fittings feature 1/4 SAE mae fare access ports and are furnished with a finger tight quick sea cap. Access vaves with connections have interna OS soder cups. Access vave products with a soder cup are shipped with the vave core oose. Vave cores shoud be torqued after brazing to ARI 720 Standard. Access Vaves may be instaed in any position on either high or ow side for quick testing, pressure checking, purging or charging. H14 Otsego, ichigan
15 Access Vaves Extended Copper Tube AVUSE AVUSE-2 AVUSE-3 AVUSE-4 AVUSE-5 AVUSE-6 AVUSE-8 AVUSE-9 AVUSE-11 1/8 O.. Tube 3/16 O.. Tube 1/4 O.. Tube 5/16 O.. Tube 3/8 O.. Tube 1/2 O.. Tube 1/8 O.. Tube; Additiona steps on body for 3/16, 1/4, 5/16, 3/8 O.. Tube. 3/16, 1/4, or 5/16 Soder Fitting/Swaged Tube. 3/16 O.. Tube; Additiona steps on body for 1/4 or 3/8 Soder Fittings/Swaged Tubes 5/16 O.. Tube. Forged Union Tee AVT2 AVT2-4 ae Connector AVU1 AVU1-2 AVU1-4 1/4" Access A Ends With 2 Forged Fare uts and One Core and Cap 1/8" ae Pipe or 1/4" O.. Soder 1/4" ae Pipe or 5/16" O.. Soder Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Access Vave Assemby AVUIFI AVUIFI-4 7/16-20 SAE Straight O-Ring Port Soder Tee AVTS AVTS-4 1/4 O.. Tube or 3/8 Soder Fitting/Swaged Tube AVTS-5 5/16 O.. Tube or 3/8 Soder Fitting/Swaged Tube AVTS-6 3/8 O.. Tube or 1/2 Soder Fitting/Swaged Tube AVTS-8 1/2 O.. Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. ote: Standard o-ring is neoprene. Consut Brass Products ivision for optiona o-rings Forged ae Ebow AVE1 AVE1-2 1/8" ae Pipe or 1/4" O.. Soder Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Extended Soder Tee AVTS AVTS-6 3/8 O.. Tube/Soder 5/16, 3/8 & 7/16 Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Forged ae Run Tee AVT3 AVT3-2 AVT3-4 1/8" ae Pipe or 1/4" O.. Soder on Run x 1/4" Access on Run and Branch With One Core and Cap 1/4" ae Pipe or 5/16" O.. Soder on Run x 1/4" Access on Run and Branch With One Core and Cap Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Fu Union AVU2 AVU2-4 1/4 O.. Fare Tube With Forged Fare ut Bukhead Union AVU2BH AVU2BH-4 1/4" Bukhead Access X 1/4" SAE With Forged ut Forged ae Cross AVC1 AVC1-4 1/4" ae Pipe or 5/16" O.. Soder x 1/4" Access on a Fare Ends With One Core and Cap Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Bukhead Soder Union AVUS3BH AVUS3BH-4 1/4" Bukhead Access X 3 Way OS Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. H15 Otsego, ichigan
16 Access Vaves Swive Cross AVCS4-4 AVCS4-4 1/4" Forged Femae Fare Swive With epressor x 1/4" Access on a Fare Ends with One Core and Cap Forged Femae Branch Tee AVTS6 AVTS6-4 AVTS6-4 1/4" Femae Fare Swive x 1/4" Access on Both Ends 1/4" Femae Fare Swive on Branch with epressor x 1/4" Access on Both Ends Femae Connector AVUR3 AVUR3-4 1/4" Femae Fare with Copper Gasket 3 Way Soder Connector AVUS3 AVUS3-40 For 3/16" O.. Tube or 1/4" and 3/8" Soder Fitting/Swaged Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Quick Sea Caps 640QSF 640QSF-4 640QSF-6 Quick Sea Cap with Core Remover 640QSFCR 640QSFCR-4 1/4" SAE Sea Cap with Sea Gasket 3/8" SAE Sea Cap with Sea Gasket 1/4" SAE Sea Cap Core Remover with interna Sea Gasket Straight Soder Connector AVUS AVUS-42 1/8" O.. Tube or 1/4" Soder Fitting/Swaged Tube AVUS-43 3/16" O.. Tube or 1/4" Soder Fitting/Swaged Tube AVUS-44 1/4" O.. Tube or 3/8" Soder Fitting/Swaged Tube AVUS-45 5/16" O..Tube or 1/2" Soder Fitting/Swaged Tube AVUS-46 3/8" O.. Tube or 1/2" Soder Fitting/Swaged Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Core Remover CR CR-001 Standard Core Remover Vave Cores VC VC-001 Repacement Vave Cores For a 1/4" Access Vaves Swive Connector AVUS4 AVUS4-4 1/4" Forged Femae Fare Swive ut with epressor Refrigerant adapter 88AC 88AC-8-2 1/8" mae to SAE J2197 Acme ed mae connector Forged Femae Run Swive Tee AVTS4 AVTS4-4 AVTS4-4 1/4" Femae Fare Swive x 1/4" Access on Both Run and Branch 1/4" Femae Fare Swive on Run with epressor x 1/4" Access on Both Run and Branch Refrigerant adapter 880AC 880AC-8-4 1/4" femae SAE fare to SAE J2197 Acme ed mae connector Refrigerant adapter 881AC 881AC-8-4 1/4" SAE mae fare to SAE J2197 Acme ed femae connector H16 Otsego, ichigan
Flare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationIndustrial: Adapters. Pipe Fittings. Metric Adapters. ISO Port Adapters. Garden Hose Fittings. Forgings & Extrusions Dryseal Threads SAE Standards
Industria: Adapters Pipe Fittings Forgings & Extrusions rysea s SAE Standards etri Adapters Forgings & Extrusions Eonoia Reusabe ISO Port Adapters eets SAE 44-3 Requireents eets ISO 649-3 Requireents Viton
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationVALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
More informationManifold Technology. ----------------------------------------------------- made in Germany
Manifod Technoogy. ----------------------------------------------------- made in Germany I EVERYTHING UNDER CONTROL. Manifod Technoogy BEULCO heating and cooing manifods made of high-quaity brass ensure
More informationAir Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003
Air Conditioning & Refrigeration Master Catalog Catalog CIC-2003-1/USA April 2003 Table of Contents Table of Contents Service Valves Frontseating Valves... page 115 RB01 Series Ball Valves... page 117
More information3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE
4 3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE A. Changing the Control Board B. Replacing a Heating Element C. Thermistor Replacement D. High Limit Switch Replacement E. Level Detector Replacement
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationPower-D-Box Printed Circuit Board Version for 2216/REF16
Power-D-Box Printed Circuit Board Version for 226/REF6 Description The Power-D-Box based on a is a compact power distribution system, designed as a 9" 2U rack made of auminium profies with anodised front
More informationCHANNEL LETTER LIGHTING
LIGHTING UNIQUE LIGHTING SOLUTIONS WARNING The retrofit instaation must ony be performed by a icensed eectrician. To prevent death, injury or damage to property this product must be instaed in accordance
More informationMethod of Build KOMFORT. Polar 100
Poar 100 - a seamess (tape and fiied or skimmed) soid partition and frameess gazed dry or siicon jointed system Poar 100 Method of Buid Love the space you re in. March 2013 Poar-100 - partitioning system
More informationCHANNEL LETTER LIGHTING
LIGHTING UNIQUE LIGHTING SOLUTIONS WARNING The retrofit instaation must ony be performed by a icensed eectrician. To prevent death, injury or damage to property this product must be instaed in accordance
More informationDESIGN STANDARDS SECTION 23 60 00
PART 1 - GENERAL 1.01 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.02 General requirements: A.
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationInstallation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
More informationSubmersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
More informationMetric Tube Fittings
Metric Tube Fittings Index Introduction 2 Terms & Conditions 3 Connectors teel 4 tainless teel 22 Tube teel 35 tainless teel 36 Technical ection Assembly Instructions 37-38 Tube pecifications 39-41 Conversion
More informationREPAIR AND MAINTENANCE MANUAL
REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633
More informationTWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER
TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER 1. BEFORE YOU BEGIN A. HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and
More informationrelief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)
Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.
More informationAMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
More informationInstalling a Probe. Typical Installation
for hazardous locations. Prior to any installation in a Classified Hazardous Location, verify installation methods by the Control Drawing referenced on the product s name tag 2. The Feed Through Assembly
More informationFUEL SYSTEMS OUR PARTS PUT YOU IN THE PASSING LANE. Protect your fuel system. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE FUEL SYSTEMS Protect your fuel system. Velvac offers a wide range of locking fuel caps and anti-siphon tubes to keep unlawful occurances at bay. With OEM approved
More informationSHUTTER STARZ TABLETOP COMPLETE PHOTO STUDIO KIT
SHUTTR STARZ TABLTOP COMPLT PHOTO STUIO KIT TX Internationa 2012 A B H C G I SS150 SHUTTR STARZ PROSSIONAL PHOTOGRAPHY STUIO LIGHTING UMBRLLA KIT A B C G H I Qty. 1 32 Professiona Light Tent Qty. 1 13
More informationApplication Feature Valve Nominal Liquid Capacity R-22 (in tons)*
EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils Quick Select Guide Applications Application Feature Valve Nominal Liquid Capacity R-22 (in tons)* Nominal Liquid Capacity R-410A (in tons)* Liquid Line
More informationPin/terminal: Wire protect: Screw/torque: Dubilier Connectors. Plan Pin Dia 1.0 Rec-hole Size 1.1. Pin/terminal: Wire protect: Screw/torque:
TERMINA BOCKS mm PITCH VERTICA MOUNT mm Pitch and 3 pole interlocking 4- pole solid, end stackable U94v-0 Flame retardant material.mm wire acceptance U/VDE approved Screw terminal 7.A/380V Dielectric Strength:
More information8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
More informationIndustrial Pipe Fittings and Adapters The Fitting Authority
Industrial Pipe Fittings and Adapters The Fitting Authority Visual Index CR Male Pipe Elbow FF Pipe Nipple FFF Long Pipe Nipple RRS Male Pipe Tee DD Female Pipe Elbow Industrial Pipe Fittings DD45 Female
More informationV46 Pressure-Actuated Water-Regulating Valve
V46 Pressure-Actuated Water-Regulating Valve Product Bulletin Code No. LIT-125687 Issued August 9, 2010 Supersedes October 1, 1995 The V46 pressure-actuated modulating valves come in two types of control
More informationMechanical Engineering Drawing Workshop. Sample Drawings. Sample 1. Sample 1. Sample 2. Sample 2 2013/7/19. JIS Drawing Part 1
Mechanica Engineering Drawing Workshop Sampe Drawings JIS Drawing Part Content:.Sampe Drawings 2.Drawing sheets 3. Views and projection methods 4. Line Conventions 5. Scaes 6. Sectiona drawings 7. Detai
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationSOLENOID VALVE FOR REFRIGERATING SYSTEMS
SOLENOID VALVE FOR REFRIGERATING SYSTEMS FROM UALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel uality Range of Products
More informationPowers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationBolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
More informationWatts Pure Water Systems
Watts Pure Water Systems WM-120-PT Installation and Operation Manual Premier Water Systems Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationGYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
More informationPowers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationWorking with Copper Tubing
This sample chapter is for review purposes only. opyright The Goodheart-Willcox o., Inc. ll rights reserved. Objectives fter studying this chapter, you will be able to: Identify types and sizes of copper
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More information37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)
37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and
More informationUniversal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationYELLOW JACKET Hose Adapters, Valves, and Parts right to the last detail
YELLOW JACKET Hose Adapters, Valves, and Parts right to the last detail NEW Valve core tool page 35 EXPANDED LINE Quick couplers page 36 33 1/4" 4-IN-1 BALL VALVE TOOL for vacuum, charge, cores and recovery
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
More informationPowers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
More informationBlindklinknagel catalogus Blind Rivet Catalogue
Bindkinknage cataogus Bind Rivet Cataogue In spite of the constant care and attention to ensure the accuracy of the information on this cataogue, Masterfix assumes no responsibiity therefore. A content
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationInstallation and Operation Manual. Shutdown Solenoid for UG Governor. Manual 03013 (Revision T)
Installation and Operation Manual Shutdown Solenoid for UG Governor Manual 03013 (Revision T) WARNING DANGER OF DEATH OR PERSONAL INJURY WARNING FOLLOW INSTRUCTIONS Read this entire manual and all other
More informationBETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
More informationSporlan V-Series Ruby Seat Solenoid Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Sporlan V-Series Ruby Seat Solenoid Valves RACE Catalogue 30-10-8 UK,
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationH1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
More informationOcean Engineering Technical Data Sheet Stuffing Tubes
Ocean Engineering Technical Data Sheet Stuffing Tubes Stuffing tubes are devices used to allow a wire or cable to pass through a wall or bulkhead and protect components from the outside environment. Many
More informationSubmersion/Insertion Toroidal Sensor
Instruction Manual 228 Sensor LIQ_MAN_ABR_228 May 2014 PN 51A-228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.rosemountanalytical.com CAUTION SENSOR/PROCESS
More informationThe width of single glazing. The warmth of double glazing.
Therma Insuation CI/SfB (31) Ro5 (M5) September 2012 The width of singe gazing. The warmth of doube gazing. Pikington Spacia Revoutionary vacuum gazing. Image courtesy of Lumen Roofight Ltd. Pikington
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationRepair of Hyd-ro-ac Actuators
Repair of Hyd-ro-ac Actuators OVERHAUL INSTRUCTIONS SS-.2A-1V SS-.5A-1V SS-.5A-2V Read the entire contents of these instructions before installing the actuator and before making any connections to the
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationInstallation and Troubleshooting Instructions for Electric Tankless Residential Water Heaters.
Model Number: Serial Number: Information Manual Installation and Troubleshooting Instructions for Electric Tankless Residential Water Heaters. ATTENTION: IF YOU ARE NOT A LICENSED PLUMBER OR A LICENSED
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-14862 This is to certify that the Pipe System with Couplings with type designation(s) Megapress with SC-contour Issued to Viega GmbH & Co.
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationSQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
More informationSTC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
More informationVersion: 1.0 TWO HANDLES INWALL WATERFALL FAUCET INSTALL GUIDE
MODEL: S1248CW Version: 1.0 TWO HANDLES INWALL WATERFALL FAUCET INSTALL GUIDE Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationProduct Catalogue Australian Plumbing Fittings
Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationSECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
More informationInstaller s Guide 18-AH39D1-13
18-AH39D1-13 Cased Aluminum "Convertible" Coils 4TXCA018BC3HC** 4TXCA024BC3HC** 4TXCB025BC3HC** 4TXCB026BC3HC** 4TXCB031BC3HC** 4TXCB032BC3HC** ALL phases of this installation must comply with NATIONAL,
More informationTECHNICAL DATA & SERVICE MANUAL SPLIT SYSTEM AIR CONDITIONER INDOOR UNIT: AW52AL AW64AL AW52AL 387030095 AW64AL 0.8180.463.0 07/05
TECHNICAL DATA & SERVICE MANUAL INDOOR UNIT: AW52AL AW64AL SPLIT SYSTEM AIR CONDITIONER Model No. Product Code No. AW52AL 387030095 AW64AL 387030096 0.8180.463.0 07/05 IMPORTANT! Please read before installation
More informationAutoDome Easy II. VEZ Series. Mounting Manual
AutoDome Easy II VEZ Series en Mounting Manual AutoDome Easy II Table of Contents en 3 Table of Contents 1 Important Safety Instructions 5 2 Unpacking 7 2.1 Parts List 7 3 Description 9 4 Installing a
More informationWeatherproof Extension Case (Part # S-EXT-CASE)
Weatherproof Extension Case (Part # S-EXT-CASE) The Weatherproof Extension Case is a PVC housing designed to enclose the coupler that connects two modular cables, such as two smart sensor cables or two
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationXL PREMIUM OIL COOLER KIT
-J05 REV. 0-0-0 XL PREMIUM OIL COOLER KIT GENERAL Kit Number 0008 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationSystem Accessories Pricing. Page 0 Effective 7/02
System Accessories Pricing Page 0 Effective 7/02 Firetrace Tubing 200005 Firetrace Detection Tubing (FDT) (Per Foot) (Available in continuous lengths up to 333 ft.) Accessories 400001 400004 400061 400060
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationBRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationRI27-J CNG REDUCER INSTALLATION PROVISIONS & WARNINGS
RI27-J CNG REDUCER INSTALLATION PROVISIONS & WARNINGS Rev.01.02 BIGAS INTERNATIONAL AUTOGAS SYSTEMS S.r.l. Via di Le Prata, 62/66-50041 Calenzano Firenze ITALY Tel. 0554211275 - Fax 0554215977 http: www.bigas.it
More informationFord Pipe Repair Products The Ford Meter Box Company, Inc.
Section L 7/2008 Ford Pipe Repair Products The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487 Overseas FAX:
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationOPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationINSTALLATION INSTRUCTIONS
2011 Lennox Industries Inc. Dallas, Texas, USA INSTALLATION INSTRUCTIONS Dave Lennox Signature Collection XP17 System HEAT PUMPS 506586 01 06/11 Supersedes 05/11 Litho U.S.A. RETAIN THESE INSTRUCTIONS
More informationTHE CAUSES OF IBC (INTERMEDIATE BULK CONTAINER) LEAKS AT CHEMICAL PLANTS AN ANALYSIS OF OPERATING EXPERIENCE
THE CAUSES OF IBC (INTERMEDIATE BULK CONTAINER) LEAKS AT CHEMICAL PLANTS AN ANALYSIS OF OPERATING EXPERIENCE Christopher J. Beae (FIChemE) Ciba Expert Services, Charter Way, Maccesfied, Cheshire, SK10
More informationInstallation Instructions 6028.801
DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American
More information